summaryrefslogtreecommitdiff
path: root/fs/autofs4
AgeCommit message (Collapse)AuthorFilesLines
2009-09-01autofs4 - fix missed case when changing to use struct pathIan Kent1-1/+1
In the recent change by Al Viro that changes verious subsystems to use "struct path" one case was missed in the autofs4 module which causes mounts to no longer expire. Signed-off-by: Ian Kent <raven@themaw.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-12headers: smp_lock.h reduxAlexey Dobriyan1-1/+0
* Remove smp_lock.h from files which don't need it (including some headers!) * Add smp_lock.h to files which do need it * Make smp_lock.h include conditional in hardirq.h It's needed only for one kernel_locked() usage which is under CONFIG_PREEMPT This will make hardirq.h inclusion cheaper for every PREEMPT=n config (which includes allmodconfig/allyesconfig, BTW) Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-12switch follow_down()Al Viro4-16/+14
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-06-12switch follow_up() to struct pathAl Viro1-1/+1
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-06-12Get rid of path_lookup in autofs4Al Viro1-135/+60
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-06-10autofs4: remove hashed check in validate_wait()Ian Kent1-14/+8
The recent ->lookup() deadlock correction required the directory inode mutex to be dropped while waiting for expire completion. We were concerned about side effects from this change and one has been identified. I saw several error messages. They cause autofs to become quite confused and don't really point to the actual problem. Things like: handle_packet_missing_direct:1376: can't find map entry for (43,1827932) which is usually totally fatal (although in this case it wouldn't be except that I treat is as such because it normally is). do_mount_direct: direct trigger not valid or already mounted /test/nested/g3c/s1/ss1 which is recoverable, however if this problem is at play it can cause autofs to become quite confused as to the dependencies in the mount tree because mount triggers end up mounted multiple times. It's hard to accurately check for this over mounting case and automount shouldn't need to if the kernel module is doing its job. There was one other message, similar in consequence of this last one but I can't locate a log example just now. When checking if a mount has already completed prior to adding a new mount request to the wait queue we check if the dentry is hashed and, if so, if it is a mount point. But, if a mount successfully completed while we slept on the wait queue mutex the dentry must exist for the mount to have completed so the test is not really needed. Mounts can also be done on top of a global root dentry, so for the above case, where a mount request completes and the wait queue entry has already been removed, the hashed test returning false can cause an incorrect callback to the daemon. Also, d_mountpoint() is not sufficient to check if a mount has completed for the multi-mount case when we don't have a real mount at the base of the tree. Signed-off-by: Ian Kent <raven@themaw.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-03autofs4: fix incorrect return in autofs4_mount_busy()Ian Kent1-1/+3
Fix an obvious incorrect return status in autofs4_mount_busy(). Signed-off-by: Ian Kent <raven@themaw.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-21autofs4: use memchr() in invalid_string()Al Viro1-6/+4
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-04-21Fix AUTOFS_DEV_IOCTL_REQUESTER_CMDAl Viro1-1/+1
Missing conversion from kernel to userland dev_t; this sucker breaks as soon as we get sufficiently many autofs mounts for new_encode_dev(s_dev) != s_dev. Note: this is the minimal fix. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-04-01autofs4: fix lookup deadlockIan Kent1-20/+21
A deadlock can occur when user space uses a signal (autofs version 4 uses SIGCHLD for this) to effect expire completion. The order of events is: Expire process completes, but before being able to send SIGCHLD to it's parent ... Another process walks onto a different mount point and drops the directory inode semaphore prior to sending the request to the daemon as it must ... A third process does an lstat on on the expired mount point causing it to wait on expire completion (unfortunately) holding the directory semaphore. The mount request then arrives at the daemon which does an lstat and, deadlock. For some time I was concerned about releasing the directory semaphore around the expire wait in autofs4_lookup as well as for the mount call back. I finally realized that the last round of changes in this function made the expiring dentry and the lookup dentry separate and distinct so the check and possible wait can be done anywhere prior to the mount call back. This patch moves the check to just before the mount call back and inside the directory inode mutex release. Signed-off-by: Ian Kent <raven@themaw.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01autofs4: cleanup expire code duplicationIan Kent3-38/+20
A significant portion of the autofs_dev_ioctl_expire() and autofs4_expire_multi() functions is duplicated code. This patch cleans that up. Signed-off-by: Ian Kent <raven@themaw.net> Signed-off-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-27constify dentry_operations: autofs, autofs4Al Viro2-3/+3
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-01-22fs/Kconfig: move autofs, autofs4 outAlexey Dobriyan1-0/+20
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-01-07autofs4: fix string validation check orderIan Kent1-6/+7
In function validate_dev_ioctl() we check that the string we've been sent is a valid path. The function that does this check assumes the string is NULL terminated but our NULL termination check isn't done until after this call. This patch changes the order of the check. Signed-off-by: Ian Kent <raven@themaw.net> Acked-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-07autofs4: make autofs type usage explicitIan Kent5-17/+15
- the type assigned at mount when no type is given is changed from 0 to AUTOFS_TYPE_INDIRECT. This was done because 0 and AUTOFS_TYPE_INDIRECT were being treated implicitly as the same type. - previously, an offset mount had it's type set to AUTOFS_TYPE_DIRECT|AUTOFS_TYPE_OFFSET but the mount control re-implementation needs to be able distinguish all three types. So this was changed to make the type setting explicit. - a type AUTOFS_TYPE_ANY was added for use by the re-implementation when checking if a given path is a mountpoint. It's not really a type as we use this to ask if a given path is a mountpoint in the autofs_dev_ioctl_ismountpoint() function. - functions to set and test the autofs mount types have been added to improve readability and make the type usage explicit. - the mount type is used from user space for the mount control re-implementtion so, for consistency, all the definitions have been moved to the user space include file include/linux/auto_fs4.h. Signed-off-by: Ian Kent <raven@themaw.net> Signed-off-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-07autofs4: fix var shadowed by local delarationIan Kent1-3/+3
A local definition of devid in autofs_dev_ioctl_ismountpoint() shadows the fuction wide definition. Signed-off-by: Ian Kent <raven@themaw.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-07autofs4: improve parameter usageIan Kent1-25/+29
The parameter usage in the device node ioctl code uses arg1 and arg2 as parameter names. This patch redefines the parameter names to reflect what they actually are in an effort to make the code more readable. Signed-off-by: Ian Kent <raven@themaw.net> Signed-off-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-05zero i_uid/i_gid on inode allocationAl Viro1-4/+0
... and don't bother in callers. Don't bother with zeroing i_blocks, while we are at it - it's already been zeroed. i_mode is not worth the effort; it has no common default value. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-11-14Merge branch 'master' into nextJames Morris2-6/+18
Conflicts: security/keys/internal.h security/keys/process_keys.c security/keys/request_key.c Fixed conflicts above by using the non 'tsk' versions. Signed-off-by: James Morris <jmorris@namei.org>
2008-11-14CRED: Pass credentials through dentry_open()David Howells1-1/+2
Pass credentials through dentry_open() so that the COW creds patch can have SELinux's flush_unauthorized_files() pass the appropriate creds back to itself when it opens its null chardev. The security_dentry_open() call also now takes a creds pointer, as does the dentry_open hook in struct security_operations. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: James Morris <jmorris@namei.org> Signed-off-by: James Morris <jmorris@namei.org>
2008-11-14CRED: Wrap task credential accesses in the autofs4 filesystemDavid Howells2-4/+4
Wrap access to task credentials so that they can be separated more easily from the task_struct during the introduction of COW creds. Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id(). Change some task->e?[ug]id to task_e?[ug]id(). In some places it makes more sense to use RCU directly rather than a convenient wrapper; these will be addressed by later patches. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: James Morris <jmorris@namei.org> Acked-by: Serge Hallyn <serue@us.ibm.com> Cc: Ian Kent <raven@themaw.net> Cc: autofs@linux.kernel.org Signed-off-by: James Morris <jmorris@namei.org>
2008-11-07autofs4: collect version check returnIan Kent1-2/+3
The function check_dev_ioctl_version() returns an error code upon fail but it isn't captured and returned in validate_dev_ioctl() as it should be. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Ian Kent <raven@themaw.net> Signed-off-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-07autofs4: correct offset mount expire checkIan Kent1-4/+15
When checking a directory tree in autofs_tree_busy() we can incorrectly decide that the tree isn't busy. This happens for the case of an active offset mount as autofs4_follow_mount() follows past the active offset mount, which has an open file handle used for expires, causing the file handle not to count toward the busyness check. Signed-off-by: Ian Kent <raven@themaw.net> Signed-off-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16autofs4: add miscellaneous device for ioctlsIan Kent5-12/+915
Add a miscellaneous device to the autofs4 module for routing ioctls. This provides the ability to obtain an ioctl file handle for an autofs mount point that is possibly covered by another mount. The actual problem with autofs is that it can't reconnect to existing mounts. Immediately one things of just adding the ability to remount autofs file systems would solve it, but alas, that can't work. This is because autofs direct mounts and the implementation of "on demand mount and expire" of nested mount trees have the file system mounted on top of the mount trigger dentry. To resolve this a miscellaneous device node for routing ioctl commands to these mount points has been implemented in the autofs4 kernel module and a library added to autofs. This provides the ability to open a file descriptor for these over mounted autofs mount points. Please refer to Documentation/filesystems/autofs4-mount-control.txt for a discussion of the problem, implementation alternatives considered and a description of the interface. [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: build fix] Signed-off-by: Ian Kent <raven@themaw.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16autofs4: track uid and gid of last mount requesterIan Kent3-0/+39
Track the uid and gid of the last process to request a mount for on an autofs dentry. [akpm@linux-foundation.org: fix tpyo in comment] Signed-off-by: Ian Kent <raven@themaw.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16autofs4: cleanup autofs mount type usageIan Kent4-12/+10
Usage of the AUTOFS_TYPE_* defines is a little confusing and appears inconsistent. Signed-off-by: Ian Kent <raven@themaw.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-13vfs: Use const for kernel parser tableSteven Whitehouse1-1/+1
This is a much better version of a previous patch to make the parser tables constant. Rather than changing the typedef, we put the "const" in all the various places where its required, allowing the __initconst exception for nfsroot which was the cause of the previous trouble. This was posted for review some time ago and I believe its been in -mm since then. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Cc: Alexander Viro <aviro@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-25[PATCH] fix ->llseek() for a bunch of directoriesAl Viro1-0/+2
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-07-24autofs4: remove unused ioctlsIan Kent1-67/+1
The ioctls AUTOFS_IOC_TOGGLEREGHOST and AUTOFS_IOC_ASKREGHOST were added several years ago but what they were intended for has never been implemented (as far as I'm aware noone uses them) so remove them. Signed-off-by: Ian Kent <raven@themaw.net> Reviewed-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24autofs4: reorganize expire pending wait function callsIan Kent3-65/+40
This patch re-orgnirzes the checking for and waiting on active expires and elininates redundant checks. Signed-off-by: Ian Kent <raven@themaw.net> Cc: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24autofs4: fix direct mount pending expire race - correctionIan Kent1-8/+2
Appologies, somehow I seem to have sent an out dated version of this patch. Here is an additional patch that brings the patch up to date. Signed-off-by: Ian Kent <raven@themaw.net> Cc: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24autofs4: fix direct mount pending expire raceIan Kent3-26/+65
For direct and offset type mounts that are covered by another mount we cannot check the AUTOFS_INF_EXPIRING flag during a path walk which leads to lookups walking into an expiring mount while it is being expired. For example, for the direct multi-mount map entry with a couple of offsets: /race/mm1 / <server1>:/<path1> /om1 <server2>:/<path2> /om2 <server1>:/<path3> an autofs trigger mount is mounted on /race/mm1 and when accessed it is over mounted and trigger mounts made for /race/mm1/om1 and /race/mm1/om2. So it isn't possible for path walks to see the expiring flag at all and they happily walk into the file system while it is expiring. When expiring these mounts follow_down() must stop at the autofs mount and all processes must block in the ->follow_link() method (except the daemon) until the expire is complete. This is done by decrementing the d_mounted field of the autofs trigger mount root dentry until the expire is completed. In ->follow_link() all processes wait on the expire and the mount following is completed for the daemon until the expire is complete. Signed-off-by: Ian Kent <raven@themaw.net> Cc: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24autofs4: fix indirect mount pending expire raceIan Kent3-23/+65
The selection of a dentry for expiration and the setting of the AUTOFS_INF_EXPIRING flag isn't done atomically which can lead to lookups walking into an expiring mount. What happens is that an expire is initiated by the daemon and a dentry is selected for expire but, since there is no lock held between the selection and setting of the expiring flag, a process may find the flag clear and continue walking into the mount tree at the same time the daemon attempts the expire it. Signed-off-by: Ian Kent <raven@themaw.net> Reviewed-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24autofs4: fix pending checksIan Kent1-3/+6
There are two cases for which a dentry that has a pending mount request does not wait for completion. One is via autofs4_revalidate() and the other via autofs4_follow_link(). In revalidate, after the mount point directory is created, but before the mount is done, the check in try_to_fill_dentry() can can fail to send the dentry to the wait queue since the dentry is positive and the lookup flags may contain only LOOKUP_FOLLOW. Although we don't trigger a mount for the LOOKUP_FOLLOW flag, if ther's one pending we might as well wait and use the mounted dentry for the lookup. In autofs4_follow_link() the dentry is not checked to see if it is pending so it may fail to call try_to_fill_dentry() and not wait for mount completion. A dentry that is pending must always be sent to the wait queue. Signed-off-by: Ian Kent <raven@themaw.net> Reviewed-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24autofs4: cleanup redundant readir codeIan Kent1-133/+16
The mount triggering functionality of readdir and related functions is no longer used (and is quite broken as well). The unused portions have been removed. Signed-off-by: Ian Kent <raven@themaw.net> Reviewed-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24autofs4: indirect dentry must almost always be positiveIan Kent1-3/+14
We have been seeing mount requests comming to the automount daemon for keys of the form "<map key>/<non key directory>" which are lookups for invalid map keys. But we can check for this in the kernel module and return a fail immediately, without having to send a request to the daemon. It is possible to recognise these requests are invalid based on whether the request dentry is negative and its relation to the autofs file system root. For example, given the indirect multi-mount map entry: idm1 \ /mm1 <server>:/<path1> /mm2 <server>:/<path2> For a request to mount idm1, IS_ROOT((idm1)->d_parent) will be always be true and the dentry may be negative. But directories idm1/mm1 and idm1/mm2 will always be created as part of the mount request for idm1. So any mount request within idm1 itself must have a positive dentry otherwise the map key is invalid. In version 4 these multi-mount entries are all mounted and umounted as a single request and in version 5 the directories idm1/mm1 and idm1/mm2 are created and an autofs fs mounted on them to act as a mount trigger so the above is also true. This also holds true for the autofs version 4 pseudo direct mount feature. When this feature is used without the "--ghost" option automount(8) will create internal submounts as we go down the map key paths which are essentially normal indirect mounts for which the above holds. If the "--ghost" option is given the directories for map keys are created at daemon startup so valid map entries correspond to postive dentries in the autofs fs. autofs version 5 direct mount maps are similar except that the IS_ROOT check is not needed. This has been addressed in a previous patch tittled "autofs4 - detect invalid direct mount requests". For example, given the direct multi-mount map entry: /test/dm1 \ /mm1 <server>:/<path1> /mm2 <server>:/<path2> An autofs fs is mounted on /test/dm1 as a trigger mount and when a mount is triggered for /test/dm1, the multi-mount offset directories /test/dm1/mm1 and /test/dm1/mm2 are created and an autofs fs is mounted on them to act as mount triggers. So valid direct mount requests must always have a positive dentry if they correspond to a valid map entry. Signed-off-by: Ian Kent <raven@themaw.net> Acked-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24autofs4: detect invalid direct mount requestsIan Kent1-0/+4
autofs v5 direct and offset mounts within an autofs filesystem are triggered by existing autofs triger mounts so the mount point dentry must be positive. If the mount point dentry is negative then the trigger doesn't exist so we can return fail immediately. Signed-off-by: Ian Kent <raven@themaw.net> Cc: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24autofs4: fix waitq memory leakIan Kent2-10/+10
If an autofs mount becomes catatonic before autofs4_wait_release() is called the wait queue counter will not be decremented down to zero and the entry will never be freed. There are also races decrementing the wait counter in the wait release function. To deal with this the counter needs to be updated while holding the wait queue mutex and waiters need to be woken up unconditionally when the wait is removed from the queue to ensure we eventually free the wait. Signed-off-by: Ian Kent <raven@themaw.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24autofs4: check kernel communication pipe is valid for writeIan Kent1-2/+14
It is possible for an autofs mount to become catatonic (and for the daemon communication pipe to become NULL) after a wait has been initiallized but before the request has been sent to the daemon. We need to check for this before sending the request packet. Signed-off-by: Ian Kent <raven@themaw.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24autofs4: add missing kfreeIan Kent1-1/+3
It see that the patch tittled "autofs4 - fix pending mount race" is missing a change that I had recently made. It's missing a kfree for the case mutex_lock_interruptible() fails to aquire the wait queue mutex. Signed-off-by: Ian Kent <raven@themaw.net> Cc: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24autofs4: fix pending mount raceIan Kent1-38/+97
Close a race between a pending mount that is about to finish and a new lookup for the same directory. Process P1 triggers a mount of directory foo. It sets DCACHE_AUTOFS_PENDING in the ->lookup routine, creates a waitq entry for 'foo', and calls out to the daemon to perform the mount. The autofs daemon will then create the directory 'foo', using a new dentry that will be hashed in the dcache. Before the mount completes, another process, P2, tries to walk into the 'foo' directory. The vfs path walking code finds an entry for 'foo' and calls the revalidate method. Revalidate finds that the entry is not PENDING (because PENDING was never set on the dentry created by the mkdir), but it does find the directory is empty. Revalidate calls try_to_fill_dentry, which sets the PENDING flag and then calls into the autofs4 wait code to trigger or wait for a mount of 'foo'. The wait code finds the entry for 'foo' and goes to sleep waiting for the completion of the mount. Yet another process, P3, tries to walk into the 'foo' directory. This process again finds a dentry in the dcache for 'foo', and calls into the autofs revalidate code. The revalidate code finds that the PENDING flag is set, and so calls try_to_fill_dentry. a) try_to_fill_dentry sets the PENDING flag redundantly for this dentry, then calls into the autofs4 wait code. b) the autofs4 wait code takes the waitq mutex and searches for an entry for 'foo' Between a and b, P1 is woken up because the mount completed. P1 takes the wait queue mutex, clears the PENDING flag from the dentry, and removes the waitqueue entry for 'foo' from the list. When it releases the waitq mutex, P3 (eventually) acquires it. At this time, it looks for an existing waitq for 'foo', finds none, and so creates a new one and calls out to the daemon to mount the 'foo' directory. Now, the reason that three processes are required to trigger this race is that, because the PENDING flag is not set on the dentry created by mkdir, the window for the race would be way to slim for it to ever occur. Basically, between the testing of d_mountpoint(dentry) and the taking of the waitq mutex, the mount would have to complete and the daemon would have to be woken up, and that in turn would have to wake up P1. This is simply impossible. Add the third process, though, and it becomes slightly more likely. Signed-off-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Ian Kent <raven@themaw.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24autofs4: fix waitq lockingIan Kent2-13/+14
The autofs4_catatonic_mode() function accesses the wait queue without any locking but can be called at any time. This could lead to a possible double free of the name field of the wait and a double fput of the daemon communication pipe or an fput of a NULL file pointer. Signed-off-by: Ian Kent <raven@themaw.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24autofs4: use struct qstr in waitq.cJeff Moyer2-44/+46
The autofs_wait_queue already contains all of the fields of the struct qstr, so change it into a qstr. This patch, from Jeff Moyer, has been modified a liitle by myself. Signed-off-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Ian Kent <raven@themaw.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24autofs4: use lookup intent flags to trigger mountsIan Kent1-2/+5
When an open(2) call is made on an autofs mount point directory that already exists and the O_DIRECTORY flag is not used the needed mount callback to the daemon is not done. This leads to the path walk continuing resulting in a callback to the daemon with an incorrect key. open(2) is called without O_DIRECTORY by the "find" utility but this should be handled properly anyway. This happens because autofs needs to use the lookup flags to decide when to callback to the daemon to perform a mount to prevent mount storms. For example, an autofs indirect mount map that has the "browse" option will have the mount point directories are pre-created and the stat(2) call made by a color ls against each directory will cause all these directories to be mounted. It is unfortunate we need to resort to this but mount maps can be quite large. Additionally, if a user manually umounts an autofs indirect mount the directory isn't removed which also leads to this situation. To resolve this autofs needs to use the lookup intent flags to enable it to make this decision. This patch adds this check and triggers a call back if any of the lookup intent flags are set as all these calls warrant a mount attempt be requested. I know that external VFS code which uses the lookup flags is something that the VFS would like to eliminate but I have no choice as I can't see any other way to do this. A VFS dentry or inode operation callback which returns the lookup "type" (requires a definition) would be sufficient. But this change is needed now and I'm not aware of the form that coming VFS changes will take so I'm not willing to propose anything along these lines. If anyone can provide an alternate method I would be happy to use it. [akpm@linux-foundation.org: fix build for concurrent VFS changes] Signed-off-by: Ian Kent <raven@themaw.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24autofs4: don't release directory mutex if called in oz_modeIan Kent1-6/+5
Since we now delay hashing of dentrys until the ->mkdir() call, droping and re-taking the directory mutex within the ->lookup() function when we are being called by user space is not needed. This can lead to a race when other processes are attempting to access the same directory during mount point directory creation. In this case we need to hang onto the mutex to ensure we don't get user processes trying to create a mount request for a newly created dentry after the mount point entry has already been created. This ensures that when we need to check a dentry passed to autofs4_wait(), if it is hashed, it is always the mount point dentry and not a new dentry created by another lookup during directory creation. Signed-off-by: Ian Kent <raven@themaw.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24autofs4: fix symlink name allocationIan Kent1-1/+1
The length of the symlink name has been moved but it needs to be set before allocating space for it in the dentry info struct. This corrects a mistake in a recent patch. Signed-off-by: Ian Kent <raven@themaw.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24autofs4: use look aside list for lookupsIan Kent3-40/+156
A while ago a patch to resolve a deadlock during directory creation was merged. This delayed the hashing of lookup dentrys until the ->mkdir() (or ->symlink()) operation completed to ensure we always went through ->lookup() instead of also having processes go through ->revalidate() so our VFS locking remained consistent. Now we are seeing a couple of side affects of that change in situations with heavy mount activity. Two cases have been identified: 1) When a mount request is triggered, due to the delayed hashing, the directory created by user space for the mount point doesn't have the DCACHE_AUTOFS_PENDING flag set. In the case of an autofs multi-mount where a tree of mount point directories are created this can lead to the path walk continuing rather than the dentry being sent to the wait queue to wait for request completion. This is because, if the pending flag isn't set, the criteria for deciding this is a mount in progress fails to hold, namely that the dentry is not a mount point and has no subdirectories. 2) A mount request dentry is initially created negative and unhashed. It remains this way until the ->mkdir() callback completes. Since it is unhashed a fresh dentry is used when the user space mount request creates the mount point directory. This leaves the original dentry negative and unhashed. But revalidate has no way to tell the VFS that the dentry has changed, other than to force another ->lookup() by returning false, which is at best wastefull and at worst not possible. This results in an -ENOENT return from the original path walk when in fact the mount succeeded. To resolve this we need to ensure that the same dentry is used in all calls to ->lookup() during the course of a mount request. This patch achieves that by adding the initial dentry to a look aside list and removes it at ->mkdir() or ->symlink() completion (or when the dentry is released), since these are the only create operations autofs4 supports. Signed-off-by: Ian Kent <raven@themaw.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24autofs4: revert - redo lookup in ttfdIan Kent1-21/+0
This patch series enables the use of a single dentry for lookups prior to the dentry being hashed and so we no longer need to redo the lookup. This patch reverts the patch of commit 033790449ba9c4dcf8478a87693d33df625c23b5. Signed-off-by: Ian Kent <raven@themaw.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24autofs4: don't make expiring dentry negativeIan Kent3-78/+52
Correct the error of making a positive dentry negative after it has been instantiated. The code that makes this error attempts to re-use the dentry from a concurrent expire and mount to resolve a race and the dentry used for the lookup must be negative for mounts to trigger in the required cases. The fact is that the dentry doesn't need to be re-used because all that is needed is to preserve the flag that indicates an expire is still incomplete at the time of the mount request. This change uses the the dentry to check the flag and wait for the expire to complete then discards it instead of attempting to re-use it. Signed-off-by: Ian Kent <raven@themaw.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-01autofs: path_{get,put}() cleanupsJan Blunck2-7/+7
Here are some more places where path_{get,put}() can be used instead of dput()/mntput() pair. Besides that it fixes a bug in autofs4_mount_busy() where mntput() was called before dput(). Signed-off-by: Jan Blunck <jblunck@suse.de> Cc: Ian Kent <raven@themaw.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>