| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
On some systems (e.g. iMac 20,1 with BCM57766), the tg3 driver reads
a default placeholder mac address (00:10:18:00:00:00) from the
mailbox. The correct value on those systems are stored in the
'local-mac-address' property.
This patch, detect the default value and tries to retrieve
the correct address from the device_get_mac_address
function instead.
The patch has been tested on two different systems:
- iMac 20,1 (BCM57766) model which use the local-mac-address property
- iMac 13,2 (BCM57766) model which can use the mailbox,
NVRAM or MAC control registers
Tested-by: Rishon Jonathan R <mithicalaviator85@gmail.com>
Co-developed-by: Vincent MORVAN <vinc@42.fr>
Signed-off-by: Vincent MORVAN <vinc@42.fr>
Signed-off-by: Paul SAGE <paul.sage@42.fr>
Signed-off-by: Atharva Tiwari <atharvatiwarilinuxdev@gmail.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20260314215432.3589-1-atharvatiwarilinuxdev@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The same bounds-check bug fixed for NDP16 in the previous patch also
exists in cdc_ncm_rx_verify_ndp32(). The DPE array size is validated
against the total skb length without accounting for ndpoffset, allowing
out-of-bounds reads when the NDP32 is placed near the end of the NTB.
Add ndpoffset to the nframes bounds check and use struct_size_t() to
express the NDP-plus-DPE-array size more clearly.
Compile-tested only.
Fixes: 0fa81b304a79 ("cdc_ncm: Implement the 32-bit version of NCM Transfer Block")
Signed-off-by: Tobi Gaertner <tob.gaertner@me.com>
Link: https://patch.msgid.link/20260314054640.2895026-3-tob.gaertner@me.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
cdc_ncm_rx_verify_ndp16() validates that the NDP header and its DPE
entries fit within the skb. The first check correctly accounts for
ndpoffset:
if ((ndpoffset + sizeof(struct usb_cdc_ncm_ndp16)) > skb_in->len)
but the second check omits it:
if ((sizeof(struct usb_cdc_ncm_ndp16) +
ret * (sizeof(struct usb_cdc_ncm_dpe16))) > skb_in->len)
This validates the DPE array size against the total skb length as if
the NDP were at offset 0, rather than at ndpoffset. When the NDP is
placed near the end of the NTB (large wNdpIndex), the DPE entries can
extend past the skb data buffer even though the check passes.
cdc_ncm_rx_fixup() then reads out-of-bounds memory when iterating
the DPE array.
Add ndpoffset to the nframes bounds check and use struct_size_t() to
express the NDP-plus-DPE-array size more clearly.
Fixes: ff06ab13a4cc ("net: cdc_ncm: splitting rx_fixup for code reuse")
Signed-off-by: Tobi Gaertner <tob.gaertner@me.com>
Link: https://patch.msgid.link/20260314054640.2895026-2-tob.gaertner@me.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Most platforms using GEM in SGMII mode use in-band autonegotiation
because it is on by default in GEM's 1G PCS and is always on since
commit e276e5e40e92 ("net: macb: Disable PCS auto-negotiation for SGMII
fixed-link mode"). Leave it on if possible using the "default_an_inband"
flag of "struct phylink_config" so that platforms that lack in-band
autonegotiation configurability at the PHY do not break with commit
1338cfef1ff1 ("net: macb: fix SGMII with inband aneg disabled") which
will turn off in-band autoneg for non hot pluggable PHYs.
Once the majority of the PHY drivers that support SGMII have the
->config_inband() callback, this commit could be reverted so that non
hot pluggable PHY use outband negotiation with macb, like its the case
for other MACs.
Fixes: 1338cfef1ff1 ("net: macb: fix SGMII with inband aneg disabled")
Reported-by: Conor Dooley <conor.dooley@microchip.com>
Closes: https://lore.kernel.org/r/20260304-nebulizer-rounding-40fbc81a2ba1@spud
Signed-off-by: Charles Perry <charles.perry@microchip.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20260313142140.4040647-1-charles.perry@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Only three platforms supprt MSIs, which means having all the strings
and interrupt arrays always allocated wastes space. None of this data
is performance critical - this data is only used when requesting and
releasing the MSI interrupts.
Move the MSI data out of struct stmmac_priv into its own separately
allocated structure, and move its initialisation to a separate
function.
This removes 768 bytes from struct stmmac_priv.
Link: https://lore.kernel.org/r/aYtq4ypxXTvn_Is6@shell.armlinux.org.uk
Reviewed-by: Florian Bezdeka <florian.bezdeka@siemens.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1w113e-0000000DDwc-2oRv@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Based on previous changes in platform driver, the vendor
glue driver can enable Multi-IRQ mode, if needed.
To get enabled Multi-IRQ mode for dwmac-s32, the driver checks:
1) property of 'snps,mtl-xx-config' subnode
defines 'snps,xx-queues-to-use' bigger then one, ie:
ethernet@4033c000 {
compatible = "nxp,s32g2-dwmac";
...
snps,mtl-rx-config = <&mtl_rx_setup>;
...
mtl_rx_setup: rx-queues-config {
snps,rx-queues-to-use = <2>;
};
2) queue based IRQs are set, ie:
ethernet@4033c000 {
compatible = "nxp,s32g2-dwmac";
...
interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
/* CHN 0: tx, rx */
<GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
/* CHN 1: tx, rx */
<GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq",
"tx-queue-0", "rx-queue-0",
"tx-queue-1", "rx-queue-1";
If those prerequisites are met, the driver switches to Multi-IRQ mode,
using per-queue IRQs for rx/tx data pathr:
[ 1.387045] s32-dwmac 4033c000.ethernet: Multi-IRQ mode (per queue IRQs) selected
Now the driver owns all queues IRQs:
root@s32g399aevb3:~# grep eth /proc/interrupts
29: 0 0 0 0 0 0 0 0 GICv3 89 Level eth0:mac
30: 0 0 0 0 0 0 0 0 GICv3 91 Level eth0:rx-0
31: 0 0 0 0 0 0 0 0 GICv3 93 Level eth0:rx-1
32: 0 0 0 0 0 0 0 0 GICv3 95 Level eth0:rx-2
33: 0 0 0 0 0 0 0 0 GICv3 97 Level eth0:rx-3
34: 0 0 0 0 0 0 0 0 GICv3 99 Level eth0:rx-4
35: 0 0 0 0 0 0 0 0 GICv3 90 Level eth0:tx-0
36: 0 0 0 0 0 0 0 0 GICv3 92 Level eth0:tx-1
37: 0 0 0 0 0 0 0 0 GICv3 94 Level eth0:tx-2
38: 0 0 0 0 0 0 0 0 GICv3 96 Level eth0:tx-3
39: 0 0 0 0 0 0 0 0 GICv3 98 Level eth0:tx-4
Otherwise, if one of the prerequisite don't met, the driver
continue with MAC IRQ mode:
[ 1.387045] s32-dwmac 4033c000.ethernet: MAC IRQ mode selected
And only MAC IRQ will be attached:
root@s32g399aevb3:~# grep eth /proc/interrupts
29: 0 0 0 0 0 0 0 0 GICv3 89 Level eth0:mac
What represents the original MAC IRQ mode and is fully backward
compatible.
Reviewed-by: Matthias Brugger <mbrugger@suse.com>
Signed-off-by: Jan Petrous (OSS) <jan.petrous@oss.nxp.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20260313-dwmac_multi_irq-v12-4-b5c9d0aa13d6@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Read IRQ resources for all rx/tx channels, to allow Multi-IRQ mode
for platform glue drivers.
Reviewed-by: Matthias Brugger <mbrugger@suse.com>
Signed-off-by: Jan Petrous (OSS) <jan.petrous@oss.nxp.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20260313-dwmac_multi_irq-v12-1-b5c9d0aa13d6@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Do not run airoha_dev_stop routine explicitly in airoha_remove()
since ndo_stop() callback is already executed by unregister_netdev() in
__dev_close_many routine if necessary and, doing so, we will end up causing
an underflow in the qdma users atomic counters. Rely on networking subsystem
to stop the device removing the airoha_eth module.
Fixes: 23020f0493270 ("net: airoha: Introduce ethernet support for EN7581 SoC")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260313-airoha-remove-ndo_stop-remove-net-v2-1-67542c3ceeca@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
bond_header_parse() can loop if a stack of two bonding devices is setup,
because skb->dev always points to the hierarchy top.
Add new "const struct net_device *dev" parameter to
(struct header_ops)->parse() method to make sure the recursion
is bounded, and that the final leaf parse method is called.
Fixes: 950803f72547 ("bonding: fix type confusion in bond_setup_by_slave()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiayuan Chen <jiayuan.chen@shopee.com>
Tested-by: Jiayuan Chen <jiayuan.chen@shopee.com>
Cc: Jay Vosburgh <jv@jvosburgh.net>
Cc: Andrew Lunn <andrew+netdev@lunn.ch>
Link: https://patch.msgid.link/20260315104152.1436867-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In HSR offload mode, multicast addresses can be added via HSR master
(hsr0) or directly to slave ports (eth1/eth2). The FDB must track port
membership: P0 (0x1) for HSR master, P1 (0x2) for slave port 1, and P2
(0x4) for slave port 2. When the same address is added from multiple
paths, memberships must accumulate.
Implement a hybrid approach using __dev_mc_sync() callbacks to track
basic add/delete operations, checking netdev_hw_addr->synced to
distinguish HSR-synced addresses from direct additions. Post-process
to handle overlapping memberships by checking refcount:
- refcount=2 with synced=1: HSR only (P0)
- refcount>=3 with synced=1: HSR + direct (P0|P1/P2)
- synced=0 with P0 set: HSR removed, clean up orphaned P0
On add operations, accumulate new membership with existing ports. On
delete operations, remove only the specific port and clean up orphaned
P0 bits if needed.
Add error handling for icssg_fdb_lookup() which can return negative
error codes (e.g., -ETIMEDOUT). On lookup failure in add/delete path,
default to no existing membership. In the post-processing path, skip
the address update to avoid corrupting FDB entries with garbage values.
VLAN Interface Handling:
Add support for multicast addresses added to VLAN interfaces on the HSR
master (e.g., hsr0.7). These addresses require P0 (HSR master) bit to be
set along with the port bits, since VLAN-tagged packets use separate FDB
entries per VLAN ID. Without P0, the HSR master would not receive
multicast packets on VLAN interfaces.
Track whether the add/del operation came from a VLAN interface path and
set P0 when in HSR offload mode with VLAN interfaces. Update orphaned P0
cleanup logic to preserve P0 for VLAN interfaces.
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260311082923.2962937-1-danishanwar@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use page_pool for RX buffer allocation in mergeable and small buffer
modes to enable page recycling and avoid repeated page allocator calls.
skb_mark_for_recycle() enables page reuse in the network stack.
Big packets mode is unchanged because it uses page->private for linked
list chaining of multiple pages per buffer, which conflicts with
page_pool's internal use of page->private.
Implement conditional DMA premapping using virtqueue_dma_dev():
- When non-NULL (vhost, virtio-pci): use PP_FLAG_DMA_MAP with page_pool
handling DMA mapping, submit via virtqueue_add_inbuf_premapped()
- When NULL (VDUSE, direct physical): page_pool handles allocation only,
submit via virtqueue_add_inbuf_ctx()
This preserves the DMA premapping optimization from commit 31f3cd4e5756b
("virtio-net: rq submits premapped per-buffer") while adding page_pool
support as a prerequisite for future zero-copy features (devmem TCP,
io_uring ZCRX).
Page pools are created in probe and destroyed in remove (not open/close),
following existing driver behavior where RX buffers remain in virtqueues
across interface state changes.
Signed-off-by: Vishwanath Seshagiri <vishs@meta.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://patch.msgid.link/20260310183107.2822016-1-vishs@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Check the global CXL_HDM_DECODER_ENABLE bit instead of looping over
per-decoder COMMITTED bits to determine whether to fall back to DVSEC
range emulation. When the HDM decoder capability is globally enabled,
ignore DVSEC range registers regardless of individual decoder commit
state.
should_emulate_decoders() currently loops over per-decoder COMMITTED
bits, which leads to an incorrect DVSEC fallback when those bits are
zero. One way to trigger this is to destroy a region and bounce the
memdev:
cxl disable-region region0
cxl destroy-region region0
cxl disable-memdev mem0
cxl enable-memdev mem0
Region teardown zeroes the HDM decoder registers including the committed
bits. The subsequent memdev re-probe finds uncommitted decoders and falls
back to DVSEC emulation, even though HDM remains globally enabled.
Observed failures:
should_emulate_decoders: cxl_port endpoint6: decoder6.0: committed: 0 base: 0x0_00000000 size: 0x0_00000000
devm_cxl_setup_hdm: cxl_port endpoint6: Fallback map 1 range register
..
devm_cxl_add_region: cxl_acpi ACPI0017:00: decoder0.0: created region0
__construct_region: cxl_pci 0000:e1:00.0: mem1:decoder6.0:
__construct_region region0 res: [mem 0x850000000-0x284fffffff flags 0x200] iw: 1 ig: 4096
cxl region0: pci0000:e0:port1 cxl_port_setup_targets expected iw: 1 ig: 4096 ..
cxl region0: pci0000:e0:port1 cxl_port_setup_targets got iw: 1 ig: 256 state: disabled ..
cxl_port endpoint6: failed to attach decoder6.0 to region0: -6
..
devm_cxl_add_region: cxl_acpi ACPI0017:00: decoder0.0: created region4
alloc_hpa: cxl region4: HPA allocation error (-34) ..
Fixes: 52cc48ad2a76 ("cxl/hdm: Limit emulation to the number of range registers")
Signed-off-by: Smita Koralahalli <Smita.KoralahalliChannabasappa@amd.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://patch.msgid.link/20260316201950.224567-1-Smita.KoralahalliChannabasappa@amd.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
Region creation based on Type3 devices can be triggered from user space
allowing memory combination through interleaving.
In preparation for kernel driven region creation, that is Type2 drivers
triggering region creation backed with its advertised CXL memory, factor
out a common helper from the user-sysfs region setup for interleave
granularity.
Signed-off-by: Alejandro Lucero <alucerop@amd.com>
Reviewed-by: Gregory Price <gourry@gourry.net>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Tested-by: Gregory Price <gourry@gourry.net>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20260228173603.1125109-4-alejandro.lucero-palau@amd.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
Region creation based on Type3 devices can be triggered from user space
allowing memory combination through interleaving.
In preparation for kernel driven region creation, that is Type2 drivers
triggering region creation backed with its advertised CXL memory, factor
out a common helper from the user-sysfs region setup for interleave ways.
Signed-off-by: Alejandro Lucero <alucerop@amd.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Gregory Price <gourry@gourry.net>
Tested-by: Gregory Price <gourry@gourry.net>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20260228173603.1125109-3-alejandro.lucero-palau@amd.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
Current code is expecting Type3 or CXL_DECODER_HOSTONLYMEM devices only.
Support for Type2 implies region type needs to be based on the endpoint
type HDM-D[B] instead.
Signed-off-by: Alejandro Lucero <alucerop@amd.com>
Reviewed-by: Zhi Wang <zhiw@nvidia.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ben Cheatham <benjamin.cheatham@amd.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Davidlohr Bueso <daves@stgolabs.net>
Reviewed-by: Gregory Price <gourry@gourry.net>
Tested-by: Gregory Price <gourry@gourry.net>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://patch.msgid.link/20260228173603.1125109-2-alejandro.lucero-palau@amd.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
Remove the redundant port lookup from cxl_rcrb_get_comp_regs() and use the
dport parameter directly. The caller has already validated the port is
non-NULL before invoking this function, and dport is given as a param.
This is simpler than getting dport in the callee and return the pointer
to the caller what would require more changes.
Signed-off-by: Gregory Price <gourry@gourry.net>
Reviewed-by: Alejandro Lucero <alucerop@amd.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://patch.msgid.link/20260306164741.3796372-5-alejandro.lucero-palau@amd.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
Inside cxl/core/pci.c there are helpers for CXL PCIe initialization
meanwhile cxl/pci_drv.c implements the functionality for a Type3 device
initialization.
In preparation for type2 support, move helper functions from cxl/pci.c to
cxl/core/pci.c in order to be exported and used by type2 drivers.
[ dj: Clarified subject. ]
Signed-off-by: Alejandro Lucero <alucerop@amd.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Gregory Price <gourry@gourry.net>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Signed-off-by: Gregory Price <gourry@gourry.net>
Link: https://patch.msgid.link/20260306164741.3796372-4-alejandro.lucero-palau@amd.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
In preparation for type2 support, move structs and functions a type2
driver will need to access to into a new shared header file.
Differentiate between public and private data to be preserved by type2
drivers.
Signed-off-by: Alejandro Lucero <alucerop@amd.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Tested-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Gregory Price <gourry@gourry.net>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20260306164741.3796372-3-alejandro.lucero-palau@amd.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
In preparation for type2 drivers add function and macro for
differentiating CXL memory expanders (type 3) from CXL device
accelerators (type 2) helping drivers built from public headers
to embed struct cxl_dev_state inside a private struct.
Update type3 driver for using this same initialization.
Signed-off-by: Alejandro Lucero <alucerop@amd.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Gregory Price <gourry@gourry.net>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20260306164741.3796372-2-alejandro.lucero-palau@amd.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
A PCI host bridge node can have non-PCI child nodes (OPP tables, USB
hub, etc.) as well as PCI device child nodes.
Ensure that pwrctrl devices are only created for PCI device nodes by
checking for the 'pci' prefix in the compatible property.
Fixes: 4c4132489201 ("PCI/pwrctrl: Add APIs to create, destroy pwrctrl devices")
Reported-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
Closes: https://lore.kernel.org/all/20260212-rb3gen2-upd-gl3590-v1-1-18fb04bb32b0@oss.qualcomm.com
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260223-pwrctrl-fixes-7-0-v2-2-97566dfb1809@oss.qualcomm.com
|
|
If OF graph is used in the PCI device node, the pwrctrl core creates a
pwrctrl device even if the remote endpoint doesn't have power supply
requirements. Since the device doesn't have any power supply requirements,
there was no pwrctrl driver to probe, leading to PCI controller driver
probe deferral as it waits for all pwrctrl drivers to probe before starting
bus scan.
This issue happens with Qcom ath12k devices with WSI interface attached to
the Qcom IPQ platforms.
Fix this issue by checking for the existence of at least one power supply
property in the remote endpoint parent node. To consolidate all the checks,
create a new helper pci_pwrctrl_is_required() and move all the checks
there.
Fixes: 9db826206f9b ("PCI/pwrctrl: Create pwrctrl device if graph port is found")
Reported-by: Raj Kumar Bhagat <raj.bhagat@oss.qualcomm.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Raj Kumar Bhagat <raj.bhagat@oss.qualcomm.com>
Reviewed-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260223-pwrctrl-fixes-7-0-v2-1-97566dfb1809@oss.qualcomm.com
|
|
nvme_dev_uring_cmd() is part of struct file_operations nvme_dev_fops,
which doesn't implement ->uring_cmd_iopoll(). So it won't be called with
issue_flags that include IO_URING_F_IOPOLL. Drop the unnecessary
IO_URING_F_IOPOLL check in nvme_dev_uring_cmd().
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Anuj Gupta <anuj20.g@samsung.com>
Link: https://patch.msgid.link/20260302172914.2488599-6-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The AER and EDR error handling paths hold a reference on the pci_dev during
recovery. Hold a reference during the DPC recovery path as well.
Signed-off-by: Sizhe Liu <liusizhe5@huawei.com>
[bhelgaas: split to separate patch]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
https://patch.msgid.link/20260214081130.1878424-1-liusizhe5@huawei.com
|
|
Expose HW constant value in a shared header, to be used by core/EN
drivers.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260309093435.1850724-10-tariqt@nvidia.com
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Downstream patches will introduce SW-only LAG (e.g. shared_fdb without
HW LAG). In this mode the firmware cannot create the LAG demux table,
but vport demuxing is still required.
Move LAG demux flow-table ownership to the LAG layer and introduce APIs
to init/cleanup the demux table and add/delete per-vport rules. Adjust
the RDMA driver to use the new APIs.
In this mode, the LAG layer will create a flow group that matches vport
metadata. Vports that are not native to the LAG master eswitch add the
demux rule during IB representor load and remove it on unload.
The demux rule forward traffic from said vports to their native eswitch
manager via a new dest type - MLX5_FLOW_DESTINATION_TYPE_VHCA_RX.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260309093435.1850724-9-tariqt@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Introduce MLX5_FLOW_DESTINATION_TYPE_VHCA_RX as a new flow steering
destination type.
Wire the new destination through flow steering command setup by mapping
it to MLX5_IFC_FLOW_DESTINATION_TYPE_VHCA_RX and passing the vhca id,
extend forward-destination validation to accept it, and teach the flow
steering tracepoint formatter to print rx_vhca_id.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260309093435.1850724-8-tariqt@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Introduce mlx5_lag_get_dev_seq() which returns a device's sequence
number within the LAG: master is always 0, remaining devices numbered
sequentially. This provides a stable index for peer flow tracking and
vport ordering without depending on native_port_num.
Replace mlx5_get_dev_index() usage in en_tc.c (peer flow array
indexing) and ib_rep.c (vport index ordering) with the new API.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260309093435.1850724-7-tariqt@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Replace the fixed-size array peer_miss_rules[MLX5_MAX_PORTS], indexed
by physical function index, with an xarray indexed by vhca_id.
This decouples peer_miss_rules from mlx5_get_dev_index(), removing the
dependency on a PF-derived index and the arbitrary MLX5_MAX_PORTS bounds
check. Using vhca_id as the key simplifies insertion/removal logic and
scales better across multi-peer topologies.
Initialize and destroy the xarray alongside the existing esw->paired
xarray in mlx5_esw_offloads_devcom_init/cleanup respectively.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260309093435.1850724-6-tariqt@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Replace the use of mlx5_get_dev_index() for xarray indexing with
xa_alloc() to dynamically allocate indices. This decouples the LAG
xarray index from the physical device index.
Update mlx5_ldev_add_netdev/remove_mdev to find entries by dev pointer
and replace mlx5_lag_get_dev_index_by_seq(ldev, MLX5_LAG_P1) calls with
mlx5_lag_get_master_idx() where appropriate.
No functional changes intended
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260309093435.1850724-5-tariqt@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Replace the fixed-size array with a dynamic xarray.
This commit changes:
- Adds mlx5_lag_pf() helper for consistent xarray access
- Converts all direct pf[] accesses to use the new helper/macro
- Dynamically allocates lag_func entries via xa_store/xa_load
No functional changes intended. This prepares the LAG infrastructure
for future flexibility in device indexing.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260309093435.1850724-4-tariqt@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Update the mlx5 IFC headers with newly defined capability and
command-layout bits:
- Add silent_mode_query and rename silent_mode to silent_mode_set cap
fields.
- Add forward_vhca_rx and MLX5_IFC_FLOW_DESTINATION_TYPE_VHCA_RX.
- Expose silent mode fields in the L2 table query command structures.
Update the SD support check to use the new capability name
(silent_mode_set) to match the updated IFC definition.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260309093435.1850724-3-tariqt@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Add debug prints to help diagnose issues with incoming command submissions.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260316175642.1451749-1-lizhi.hou@amd.com
|
|
The class_create() call has been deprecated in favor of class_register()
as the driver core now allows for a struct class to be in read-only
memory. Replace vfio->class with a const struct class and drop the
class_create() call.
Compile tested and found no errors/warns in dmesg after enabling
VFIO_GROUP.
Link: https://lore.kernel.org/all/2023040244-duffel-pushpin-f738@gregkh/
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jori Koolstra <jkoolstra@xs4all.nl>
Link: https://lore.kernel.org/r/20260306190628.259203-1-jkoolstra@xs4all.nl
Signed-off-by: Alex Williamson <alex@shazbot.org>
|
|
The following code in pm_runtime_work() may dereference the dev->parent
pointer after the parent device has been freed:
/* Maybe the parent is now able to suspend. */
if (parent && !parent->power.ignore_children) {
spin_unlock(&dev->power.lock);
spin_lock(&parent->power.lock);
rpm_idle(parent, RPM_ASYNC);
spin_unlock(&parent->power.lock);
spin_lock(&dev->power.lock);
}
Fix this by inserting a flush_work() call in pm_runtime_remove().
Without this patch blktest block/001 triggers the following complaint
sporadically:
BUG: KASAN: slab-use-after-free in lock_acquire+0x70/0x160
Read of size 1 at addr ffff88812bef7198 by task kworker/u553:1/3081
Workqueue: pm pm_runtime_work
Call Trace:
<TASK>
dump_stack_lvl+0x61/0x80
print_address_description.constprop.0+0x8b/0x310
print_report+0xfd/0x1d7
kasan_report+0xd8/0x1d0
__kasan_check_byte+0x42/0x60
lock_acquire.part.0+0x38/0x230
lock_acquire+0x70/0x160
_raw_spin_lock+0x36/0x50
rpm_suspend+0xc6a/0xfe0
rpm_idle+0x578/0x770
pm_runtime_work+0xee/0x120
process_one_work+0xde3/0x1410
worker_thread+0x5eb/0xfe0
kthread+0x37b/0x480
ret_from_fork+0x6cb/0x920
ret_from_fork_asm+0x11/0x20
</TASK>
Allocated by task 4314:
kasan_save_stack+0x2a/0x50
kasan_save_track+0x18/0x40
kasan_save_alloc_info+0x3d/0x50
__kasan_kmalloc+0xa0/0xb0
__kmalloc_noprof+0x311/0x990
scsi_alloc_target+0x122/0xb60 [scsi_mod]
__scsi_scan_target+0x101/0x460 [scsi_mod]
scsi_scan_channel+0x179/0x1c0 [scsi_mod]
scsi_scan_host_selected+0x259/0x2d0 [scsi_mod]
store_scan+0x2d2/0x390 [scsi_mod]
dev_attr_store+0x43/0x80
sysfs_kf_write+0xde/0x140
kernfs_fop_write_iter+0x3ef/0x670
vfs_write+0x506/0x1470
ksys_write+0xfd/0x230
__x64_sys_write+0x76/0xc0
x64_sys_call+0x213/0x1810
do_syscall_64+0xee/0xfc0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
Freed by task 4314:
kasan_save_stack+0x2a/0x50
kasan_save_track+0x18/0x40
kasan_save_free_info+0x3f/0x50
__kasan_slab_free+0x67/0x80
kfree+0x225/0x6c0
scsi_target_dev_release+0x3d/0x60 [scsi_mod]
device_release+0xa3/0x220
kobject_cleanup+0x105/0x3a0
kobject_put+0x72/0xd0
put_device+0x17/0x20
scsi_device_dev_release+0xacf/0x12c0 [scsi_mod]
device_release+0xa3/0x220
kobject_cleanup+0x105/0x3a0
kobject_put+0x72/0xd0
put_device+0x17/0x20
scsi_device_put+0x7f/0xc0 [scsi_mod]
sdev_store_delete+0xa5/0x120 [scsi_mod]
dev_attr_store+0x43/0x80
sysfs_kf_write+0xde/0x140
kernfs_fop_write_iter+0x3ef/0x670
vfs_write+0x506/0x1470
ksys_write+0xfd/0x230
__x64_sys_write+0x76/0xc0
x64_sys_call+0x213/0x1810
Reported-by: Ming Lei <ming.lei@redhat.com>
Closes: https://lore.kernel.org/all/ZxdNvLNI8QaOfD2d@fedora/
Reported-by: syzbot+6c905ab800f20cf4086c@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/68c13942.050a0220.2ff435.000b.GAE@google.com/
Fixes: 5e928f77a09a ("PM: Introduce core framework for run-time PM of I/O devices (rev. 17)")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260312182720.2776083-1-bvanassche@acm.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Johan Hovold <johan@kernel.org> says:
This series fixes a few issues related to controller registration found
through inspection.
|
|
The controller reference count is not decremented on deregistration if
the controller has been allocated using devm_spi_alloc_host/target().
Amend the kernel-doc for devm_spi_register_controller() and
spi_unregister_controller() so that it reflects this (more recent)
behaviour.
Fixes: 5e844cc37a5c ("spi: Introduce device-managed SPI controller allocation")
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260312151817.32100-6-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The controller reference count is not decremented on registration
failures (and has not been for a very long time) contrary to what the
outdated kernel-doc says.
Drop the entire sentence about return values which are now documented in
the Return section.
Fixes: b885244eb262 ("[PATCH] spi: add spi_driver to SPI framework")
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260312151817.32100-5-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Drop the now unused device managed per-cpu statistics allocation.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260312151817.32100-4-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The controller per-cpu statistics is not allocated until after the
controller has been registered with driver core, which leaves a window
where accessing the sysfs attributes can trigger a NULL-pointer
dereference.
Fix this by moving the statistics allocation to controller allocation
while tying its lifetime to that of the controller (rather than using
implicit devres).
Fixes: 6598b91b5ac3 ("spi: spi.c: Convert statistics to per-cpu u64_stats_t")
Cc: stable@vger.kernel.org # 6.0
Cc: David Jander <david@protonic.nl>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260312151817.32100-3-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Make sure to deregister from driver core also in the unlikely event that
per-cpu statistics allocation fails during controller registration to
avoid use-after-free (of driver resources) and unclocked register
accesses.
Fixes: 6598b91b5ac3 ("spi: spi.c: Convert statistics to per-cpu u64_stats_t")
Cc: stable@vger.kernel.org # 6.0
Cc: David Jander <david@protonic.nl>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260312151817.32100-2-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The Hauppauge WinTV-HVR-935 HD stick is supported as 2040:b151
(CX231XX_BOARD_HAUPPAUGE_935C).
Some units report USB id 2040:8360 with product string "HVR-935 Audio"
and are not bound by cx231xx, so no DVB adapter is created.
Please consider adding 2040:8360 to the cx231xx_id_table with the same
driver_info as 0xb151 so these devices work without out-of-tree
patches.
How the ID was obtained (Debian, kernel 6.1.0-40-amd64):
$ lsusb -d 2040:8360
Bus 001 Device 006: ID 2040:8360 Hauppauge HVR-935 Audio
$ lsusb -t | grep -A3 "Port 3"
|__ Port 3: Dev 6, If 2, Class=Audio, Driver=snd-usb-audio, 480M
|__ Port 3: Dev 6, If 0, Class=Vendor Specific Class, Driver=, 480M
|__ Port 3: Dev 6, If 1, Class=Audio, Driver=snd-usb-audio, 480M
Interface 0 (Vendor Specific) has no driver; the stock cx231xx module
has no 2040:8360 in its alias table.
Reported-by: Lucian Onicescu <lucian.onicescu@gmail.com>
Closes: https://lore.kernel.org/linux-media/CALbYB1O79OnqKMF--HWVx-nuKtYKJbE+Ux=yK_45HDb4oujQyA@mail.gmail.com/
Suggested-by: Lucian Onicescu <lucian.onicescu@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Add checks for ioremap return values in saa7164_dev_setup(). If
ioremap for BAR0 or BAR2 fails, release the already allocated PCI
memory regions, remove the device from the global list, decrement
the device count, and return -ENODEV.
This prevents potential null pointer dereferences and ensures proper
cleanup on memory mapping failures.
Fixes: 443c1228d505 ("V4L/DVB (12923): SAA7164: Add support for the NXP SAA7164 silicon")
Cc: stable@vger.kernel.org
Signed-off-by: Wang Jun <1742789905@qq.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
On CXL platforms, the Static Resource Affinity Table (SRAT) may not
cover memory affinity information for all the CXL memory regions. Since
each CXL memory region is enumerated via a CXL Fixed Memory Window
Structure (CFMWS), during early boot the kernel parses the CFMWS tables
to find all CXL memory regions and sets a NUMA node for each of them.
This memory affinity information of CXL memory regions is later used by
the CXL ACPI driver.
The CFMWS table doesn't provide the memory affinity information either.
Currently the kernel assigns a 'faked' NUMA node for each CXL memory
region, starting from the next node of the highest node that is
enumerated via the SRAT. This can potentially increase the maximum NUMA
node ID of the platform ('nr_node_ids') a lot. E.g., on a GNR platform
with 4 NUMA nodes and 18 CFMWS tables, this bumps the 'nr_node_ids' to
22.
Increasing the 'nr_node_ids' has side effects. For instance, it is
widely used by the kernel for "highest possible NUMA node" based memory
allocations. It also impacts userspace ABIs, e.g., some NUMA memory
related system calls such as 'get_mempolicy' which requires 'maxnode'
not being smaller than the 'nr_node_ids'.
Currently parsing CFMWS tables and assigning faked NUMA node at boot is
done unconditionally. However, if the CXL ACPI driver is not enabled,
there will be no user of such memory affinity information of CXL memory
regions.
Change to only parsing the CFMWS tables at boot when CXL_ACPI is enabled
in Kconfig to avoid the unnecessary cost of bumping up 'nr_node_ids'.
E.g., on the aforementioned GNR platform, the "Slab" in /proc/meminfo is
reduced with this change (when CXL_ACPI is off):
w/ this change w/o
Slab 900488 kB 923660 kB
Signed-off-by: Kai Huang <kai.huang@intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Gregory Price <gourry@gourry.net>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://patch.msgid.link/20260308222313.14014-1-kai.huang@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
NULL VMAs have no corresponding PTE, so skip adding a PRL entry to avoid
an unnecessary PRL abort during unbind.
Signed-off-by: Brian Nguyen <brian3.nguyen@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260305171546.67691-8-brian3.nguyen@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
|
Originally, page reclamation is handled by the same fence as tlb
invalidation and uses its seqno, so there was no reason to separate out
the handlers. However in hindsight, for readability, and possible
future changes, it seems more beneficial to move this all out to its own
function.
Signed-off-by: Brian Nguyen <brian3.nguyen@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Shuicheng Lin <shuicheng.lin@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Link: https://patch.msgid.link/20260305171546.67691-7-brian3.nguyen@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
|
The check using xe_child->base.children was insufficient in determining
if a pte was a leaf node. So explicitly skip over every non-leaf pt and
conditionally abort if there is a scenario where a non-leaf pt is
interleaved between leaf pt, which results in the page walker skipping
over some leaf pt.
Note that the behavior being targeted for abort is
PD[0] = 2M PTE
PD[1] = PT -> 512 4K PTEs
PD[2] = 2M PTE
results in abort, page walker won't descend PD[1].
With new abort, ensuring valid PRL before handling a second abort.
v2:
- Revert to previous assert.
- Revised non-leaf handling for interleaf child pt and leaf pte.
- Update comments to specifications. (Stuart)
- Remove unnecessary XE_PTE_PS64. (Matthew B)
v3:
- Modify secondary abort to only check non-leaf PTEs. (Matthew B)
Fixes: b912138df299 ("drm/xe: Create page reclaim list on unbind")
Signed-off-by: Brian Nguyen <brian3.nguyen@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Cc: Stuart Summers <stuart.summers@intel.com>
Link: https://patch.msgid.link/20260305171546.67691-6-brian3.nguyen@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
|
In order to parse sub-partitions, add_mtd_partitions() calls
parse_mtd_partitions() for all previously found partitions.
Each partition will end up being passed to parse_fixed_partitions(), and
its of_node will be treated as the ofpart_node.
Commit 7cce81df7d26 ("mtd: parsers: ofpart: fix OF node refcount leak in
parse_fixed_partitions()") added of_node_put() calls for ofpart_node on
all exit paths.
In the case where the partition passed to parse_fixed_partitions() has a
parent, it is treated as a dedicated partitions node, and of_node_put()
is wrongly called for it, even if of_node_get() was not called
explicitly.
On repeated bind / unbinds of the MTD, the extra of_node_put() ends up
decrementing the refcount down to 0, which should never happen,
resulting in the following error:
OF: ERROR: of_node_release() detected bad of_node_put() on
/soc/spi@80007000/flash@0/partitions/partition@0
Call of_node_get() to balance the call to of_node_put() done for
dedicated partitions nodes.
Fixes: 7cce81df7d26 ("mtd: parsers: ofpart: fix OF node refcount leak in parse_fixed_partitions()")
Signed-off-by: Cosmin Tanislav <cosmin-gabriel.tanislav.xa@renesas.com>
Tested-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
ofpart_none can only be reached after the for_each_child_of_node() loop
finishes. for_each_child_of_node() correctly calls of_node_put() for all
device nodes it iterates over as long as we don't break or jump out of
the loop.
Calling of_node_put() inside the ofpart_none path will wrongly decrement
the ref count of the last node in the for_each_child_of_node() loop.
Move the call to of_node_put() under the ofpart_fail label to fix this.
Fixes: ebd5a74db74e ("mtd: ofpart: Check availability of reg property instead of name property")
Signed-off-by: Cosmin Tanislav <cosmin-gabriel.tanislav.xa@renesas.com>
Tested-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
The previous clean up killed the driver along with dropping some calls
but missed one place to drop. Do it here.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202603121229.PPSg4X8q-lkp@intel.com/
Reported-by: Mark Brown <broonie@kernel.org>
Closes: https://lore.kernel.org/r/abK8KXC70RC2K_fW@sirena.org.uk
Fixes: 16d68d10f5b93 "(mtd: physmap: physmap-bt1-rom: Remove not-going-to-be-supported code for Baikal SoC)"
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Printing a running dword offset in the default_lrc_* debugfs entries
makes it easier for developers to find the right offsets to use in
regs/xe_lrc_layout.h and/or compare the default LRC contents against the
bspec-documented LRC layout.
Reviewed-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Link: https://patch.msgid.link/20260311-default_lrc_offsets-v1-1-58d8ed3aa081@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
