| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
clean
Presently in `max_contaminant_is_contaminant()` if there's no
contaminant detected previously, CC is open & stopped toggling and no
contaminant is currently present, TCPC.RC would be programmed to do DRP
toggling. However, it didn't actively look for a connection. This would
lead to Type-C not detect *any* new connections. Hence, in the above
situation, re-enable toggling & program TCPC to look for a new
connection.
Also, return early if TCPC was looking for connection as this indicates
TCPC has neither detected a potential connection nor a change in
contaminant state.
In addition, once dry detection is complete (port is dry), restart
toggling.
Fixes: 02b332a06397e ("usb: typec: maxim_contaminant: Implement check_contaminant callback")
Cc: stable <stable@kernel.org>
Signed-off-by: Amit Sunil Dhamne <amitsd@google.com>
Reviewed-by: Badhri Jagan Sridharan <badhri@google.com>
Link: https://lore.kernel.org/r/20250815-fix-upstream-contaminant-v2-2-6c8d6c3adafb@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
comparator values
Low power mode is enabled when reading CC resistance as part of
`max_contaminant_read_resistance_kohm()` and left in that state.
However, it's supposed to work with 1uA current source. To read CC
comparator values current source is changed to 80uA. This causes a storm
of CC interrupts as it (falsely) detects a potential contaminant. To
prevent this, disable low power mode current sourcing before reading
comparator values.
Fixes: 02b332a06397 ("usb: typec: maxim_contaminant: Implement check_contaminant callback")
Cc: stable <stable@kernel.org>
Signed-off-by: Amit Sunil Dhamne <amitsd@google.com>
Reviewed-by: Badhri Jagan Sridharan <badhri@google.com>
Rule: add
Link: https://lore.kernel.org/stable/20250814-fix-upstream-contaminant-v1-1-801ce8089031%40google.com
Link: https://lore.kernel.org/r/20250815-fix-upstream-contaminant-v2-1-6c8d6c3adafb@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This commit addresses a rarely observed endpoint command timeout
which causes kernel panic due to warn when 'panic_on_warn' is enabled
and unnecessary call trace prints when 'panic_on_warn' is disabled.
It is seen during fast software-controlled connect/disconnect testcases.
The following is one such endpoint command timeout that we observed:
1. Connect
=======
->dwc3_thread_interrupt
->dwc3_ep0_interrupt
->configfs_composite_setup
->composite_setup
->usb_ep_queue
->dwc3_gadget_ep0_queue
->__dwc3_gadget_ep0_queue
->__dwc3_ep0_do_control_data
->dwc3_send_gadget_ep_cmd
2. Disconnect
==========
->dwc3_thread_interrupt
->dwc3_gadget_disconnect_interrupt
->dwc3_ep0_reset_state
->dwc3_ep0_end_control_data
->dwc3_send_gadget_ep_cmd
In the issue scenario, in Exynos platforms, we observed that control
transfers for the previous connect have not yet been completed and end
transfer command sent as a part of the disconnect sequence and
processing of USB_ENDPOINT_HALT feature request from the host timeout.
This maybe an expected scenario since the controller is processing EP
commands sent as a part of the previous connect. It maybe better to
remove WARN_ON in all places where device endpoint commands are sent to
avoid unnecessary kernel panic due to warn.
Cc: stable <stable@kernel.org>
Co-developed-by: Akash M <akash.m5@samsung.com>
Signed-off-by: Akash M <akash.m5@samsung.com>
Signed-off-by: Selvarasu Ganesan <selvarasu.g@samsung.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/20250808125315.1607-1-selvarasu.g@samsung.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Many Realtek USB Wi-Fi dongles released in recent years have two modes:
one is driver CD mode which has Windows driver onboard, another one is
Wi-Fi mode. Add the US_FL_IGNORE_DEVICE quirk for these multi-mode devices.
Otherwise, usb_modeswitch may fail to switch them to Wi-Fi mode.
Currently there are only two USB IDs known to be used by these multi-mode
Wi-Fi dongles: 0bda:1a2b and 0bda:a192.
Information about Mercury MW310UH in /sys/kernel/debug/usb/devices.
T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 12 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0bda ProdID=a192 Rev= 2.00
S: Manufacturer=Realtek
S: Product=DISK
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none)
E: Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=0b(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Information about D-Link AX9U rev. A1 in /sys/kernel/debug/usb/devices.
T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 55 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0bda ProdID=1a2b Rev= 0.00
S: Manufacturer=Realtek
S: Product=DISK
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none)
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Cc: stable <stable@kernel.org>
Signed-off-by: Zenm Chen <zenmchen@gmail.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20250813162415.2630-1-zenmchen@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fixes from Damien Le Moal:
- Fix a regression affecting old IDE/PATA device scan and introduced by
the recent link power management cleanups & fixes. The regression
prevented devices from being properly detected (me)
- Fix command duration limits (CDL) feature control: attempting to
enable the feature while NCQ commands are being executed resulted in
a silent failure to enable CDL when needed (Igor)
* tag 'ata-ata-6.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: libata-scsi: Fix CDL control
ata: libata-eh: Fix link state check for IDE/PATA ports
|
|
Given that the buffer is copied to a kfifo that ultimately user space
can read, ensure we zero it.
Fixes: 403e5586b52e ("iio: light: as73211: New driver")
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://patch.msgid.link/20250802164436.515988-2-jic23@kernel.org
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
When stress-testing the system by repeatedly unbinding and binding the ADC
device in a loop, and the ADC is a supplier for another device (e.g., a
thermal hardware block that reads temperature through the ADC), it may
happen that the ADC device is runtime-resumed immediately after runtime PM
is enabled, triggered by its consumer. At this point, since drvdata is not
yet set and the driver's runtime PM callbacks rely on it, a crash can
occur. To avoid this, set drvdata just after it was allocated.
Fixes: 89ee8174e8c8 ("iio: adc: rzg2l_adc: Simplify the runtime PM code")
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://patch.msgid.link/20250810123328.800104-3-claudiu.beznea.uj@bp.renesas.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
There is no need to manually track the runtime PM status in the driver.
The pm_runtime_force_suspend() and pm_runtime_force_resume() functions
already call pm_runtime_status_suspended() to check the runtime PM state.
Additionally, avoid calling pm_runtime_put_autosuspend() during the
suspend/resume path, as this would decrease the usage counter of a
potential user that had the ADC open before the suspend/resume cycle.
Fixes: 563cf94f9329 ("iio: adc: rzg2l_adc: Add suspend/resume support")
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://patch.msgid.link/20250810123328.800104-2-claudiu.beznea.uj@bp.renesas.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
In the do_validate_mem(), the call to add_interval() does not
handle errors. If kmalloc() fails in add_interval(), it could
result in a null pointer being inserted into the linked list,
leading to illegal memory access when sub_interval() is called
next.
This patch adds an error handling for the add_interval(). If
add_interval() returns an error, the function will return early
with the error code.
Fixes: 7b4884ca8853 ("pcmcia: validate late-added resources")
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
|
|
The last use of pcmcia_get_socket_by_nr() was removed in 2010 by
commit 5716d415f8c5 ("pcmcia: remove obsolete ioctl")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
|
|
Add missing check for platform_get_resource() and return error if it fails
to catch the error.
Fixes: d87d44f7ab35 ("ARM: omap1: move CF chipselect setup to board file")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
|
|
Remove hard-coded strings by using the str_off_on() and str_yes_no()
helper functions.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
|
|
The config PCCARD_IODYN was last used in the config option PCMCIA_M8XX with
its m8xx_pcmcia driver. This driver was removed with commit 39eb56da2b53
("pcmcia: Remove m8xx_pcmcia driver"), included in v3.17, back in 2014.
Since then, the config PCCARD_IODYN is unused. Remove the config option,
the corresponding file included with this config and the corresponding
definition in the pcmcia header file.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
|
|
pcmcia_dev_present() comment writes about small timeframe where
the function returns NULL (racy condition), in epizeuxis device. In the
past, it tripped contributors who misunderstood it for "really"
duplicate ([1], [2]).
Add comma between "really" words to emphasize the epizeuxis.
Link: https://lore.kernel.org/all/YxT1As38WRZcyH0%2F@shine.dominikbrodowski.net/ [1]
Link: https://lore.kernel.org/all/20220831083623.GA25639@isilmar-4.linta.de/ [2]
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
|
|
Add max_conversion_rate_hz to the chip info for "adaq4381-4". Without
this, the driver fails to probe because it tries to set the initial
sample rate to 0 Hz, which is not valid.
Fixes: bbeaec81a03e ("iio: ad7380: add support for SPI offload")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://patch.msgid.link/20250811-iio-adc-ad7380-fix-missing-max_conversion_rate_hs-on-ad4381-4-v1-1-ffb728d7a71c@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
In __iodyn_find_io_region(), pcmcia_make_resource() is assigned to
res and used in pci_bus_alloc_resource(). There is a dereference of res
in pci_bus_alloc_resource(), which could lead to a NULL pointer
dereference on failure of pcmcia_make_resource().
Fix this bug by adding a check of res.
Cc: stable@vger.kernel.org
Fixes: 49b1153adfe1 ("pcmcia: move all pcmcia_resource_ops providers into one module")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
|
|
As described in the added code comment, a reference to .exit.text is ok
for drivers registered via platform_driver_probe(). Make this explicit
to prevent the following section mismatch warning
WARNING: modpost: drivers/pcmcia/omap_cf: section mismatch in reference: omap_cf_driver+0x4 (section: .data) -> omap_cf_remove (section: .exit.text)
that triggers on an omap1_defconfig + CONFIG_OMAP_CF=m build.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"One core change removing the 'w' access flag of attributes that don't
have a set routine (and therefore can't be written to) which should
have no practical impact. The big scsi_debug update is caused by
reformatting lots of arrays and the rest of the bug fixes in drivers
are trivial"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: core: Remove error print for devm_add_action_or_reset()
scsi: ufs: mediatek: Fix out-of-bounds access in MCQ IRQ mapping
scsi: lpfc: Remove redundant assignment to avoid memory leak
scsi: lpfc: Fix wrong function reference in a comment
scsi: ufs: core: Fix interrupt handling for MCQ Mode
scsi: scsi_debug: Make read-only arrays static const
scsi: core: sysfs: Correct sysfs attributes access rights
|
|
The bd79124 has ADC inputs which can be muxed to be GPIOs. The driver
supports this by registering a GPIO-chip for channels which aren't used
as ADC.
The Kconfig entry does not handle the dependency to GPIOLIB, which
causes errors:
ERROR: modpost: "devm_gpiochip_add_data_with_key" [drivers/iio/adc/rohm-bd79124.ko] undefined!
ERROR: modpost: "gpiochip_get_data" [drivers/iio/adc/rohm-bd79124.ko] undefined!
at linking phase if GPIOLIB is not configured to be used.
Fix this by adding dependency to the GPIOLIB.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202508131533.5sSkq80B-lkp@intel.com/
Fixes: 3f57a3b9ab74 ("iio: adc: Support ROHM BD79124 ADC")
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://patch.msgid.link/6837249bddf358924e67566293944506206d2d62.1755076369.git.mazziesaccount@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Use kvfree() to fix the following Coccinelle/coccicheck warning reported
by kfree_mismatch.cocci:
WARNING kvmalloc is used to allocate this memory at line 10398
Fixes: f728c17fc97a ("accel/habanalabs/gaudi2: move HMMU page tables to device memory")
Reported-by: Qianfeng Rong <rongqianfeng@vivo.com>
Closes: https://patch.msgid.link/20250808085530.233737-1-rongqianfeng@vivo.com
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
[lukas: acknowledge Qianfeng, adjust Thorsten's domain, add Fixes tag]
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
Cc: stable@vger.kernel.org # v6.9+
Link: https://patch.msgid.link/20240820231028.136126-1-thorsten.blum@toblux.com
|
|
During raid resync, if a disk becomes faulty, the operation is
briefly interrupted. The MD_RECOVERY_RECOVER flag triggered by
the disk failure causes sync_action to incorrectly show "recover"
instead of "resync". The same issue affects reshape operations.
Reproduction steps:
mdadm -Cv /dev/md1 -l1 -n4 -e1.2 /dev/sd{a..d} // -> resync happened
mdadm -f /dev/md1 /dev/sda // -> resync interrupted
cat sync_action
-> recover
Add progress checks in md_sync_action() for resync/recover/reshape
to ensure the interface correctly reports the actual operation type.
Fixes: 4b10a3bc67c1 ("md: ensure resync is prioritized over recovery")
Signed-off-by: Zheng Qixing <zhengqixing@huawei.com>
Link: https://lore.kernel.org/linux-raid/20250816002534.1754356-3-zhengqixing@huaweicloud.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
|
|
Add a helper for checking if an rdev needs recovery.
Signed-off-by: Zheng Qixing <zhengqixing@huawei.com>
Link: https://lore.kernel.org/linux-raid/20250816002534.1754356-2-zhengqixing@huaweicloud.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
|
|
commit 907a99c314a5 ("md: rename recovery_cp to resync_offset") replaces
recovery_cp with resync_offset in mdp_superblock_s which is in md_p.h.
md_p.h is used in userspace too. So mdadm building fails because of this.
This patch revert this change.
Fixes: 907a99c314a5 ("md: rename recovery_cp to resync_offset")
Signed-off-by: Xiao Ni <xni@redhat.com>
Link: https://lore.kernel.org/linux-raid/20250815040028.18085-1-xni@redhat.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
|
|
Using device_find_child() and of_find_device_by_node() to locate
devices could cause an imbalance in the device's reference count.
device_find_child() and of_find_device_by_node() both call
get_device() to increment the reference count of the found device
before returning the pointer. In mtk_drm_get_all_drm_priv(), these
references are never released through put_device(), resulting in
permanent reference count increments. Additionally, the
for_each_child_of_node() iterator fails to release node references in
all code paths. This leaks device node references when loop
termination occurs before reaching MAX_CRTC. These reference count
leaks may prevent device/node resources from being properly released
during driver unbind operations.
As comment of device_find_child() says, 'NOTE: you will need to drop
the reference with put_device() after use'.
Cc: stable@vger.kernel.org
Fixes: 1ef7ed48356c ("drm/mediatek: Modify mediatek-drm for mt8195 multi mmsys support")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20250812071932.471730-1-make24@iscas.ac.cn/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
Pull drm fixes from Dave Airlie:
"Relatively quiet week, usual amdgpu/i915/xe fixes along with a set of
fixes for fbdev format info, which fix some regressions seen in with
rc1.
bridge:
- fix OF-node leak
- fix documentation
fbdev-emulation:
- pass correct format info to drm_helper_mode_fill_fb_struct()
panfrost:
- print correct RSS size
amdgpu:
- PSP fix
- VRAM reservation fix
- CSA fix
- Process kill fix
i915:
- Fix the implementation of wa_18038517565 [fbc]
- Do not trigger Frame Change events from frontbuffer flush [psr]
xe:
- Some more xe_migrate_access_memory fixes (Auld)
- Defer buffer object shrinker write-backs and GPU waits (Thomas)
- HWMON fix for clamping limits (Karthik)
- SRIOV-PF: Set VF LMEM BAR size (Michal)"
* tag 'drm-fixes-2025-08-16' of https://gitlab.freedesktop.org/drm/kernel:
drm/xe/pf: Set VF LMEM BAR size
drm/amdgpu: fix task hang from failed job submission during process kill
drm/amdgpu: fix incorrect vm flags to map bo
drm/amdgpu: fix vram reservation issue
drm/amdgpu: Add PSP fw version check for fw reserve GFX command
drm/xe/hwmon: Add SW clamp for power limits writes
drm/xe: Defer buffer object shrinker write-backs and GPU waits
drm/xe/migrate: prevent potential UAF
drm/xe/migrate: don't overflow max copy size
drm/xe/migrate: prevent infinite recursion
drm/i915/psr: Do not trigger Frame Change events from frontbuffer flush
drm/i915/fbc: fix the implementation of wa_18038517565
drm/panfrost: Print RSS for tiler heap BO's in debugfs GEMS file
drm/radeon: Pass along the format info from .fb_create() to drm_helper_mode_fill_fb_struct()
drm/nouveau: Pass along the format info from .fb_create() to drm_helper_mode_fill_fb_struct()
drm/omap: Pass along the format info from .fb_create() to drm_helper_mode_fill_fb_struct()
drm/bridge: document HDMI CEC callbacks
drm/bridge: Describe the newly introduced drm_connector parameter for drm_bridge_detect
drm/bridge: fix OF node leak
|
|
In 32-bit arm, the build fails with:
error[E0308]: mismatched types
--> drivers/gpu/drm/nova/file.rs:42:28
|
42 | getparam.set_value(value);
| --------- ^^^^^ expected `u64`, found `u32`
| |
| arguments to this method are incorrect
|
note: method defined here
--> drivers/gpu/drm/nova/uapi.rs:29:12
|
29 | pub fn set_value(&self, v: u64) {
| ^^^^^^^^^ ------
help: you can convert a `u32` to a `u64`
|
42 | getparam.set_value(value.into());
| +++++++
The reason is that `Getparam::set_value` takes a `u64` (from the UAPI),
but `pci::Device::resource_len()` returns a `resource_size_t`, which is a
`phys_addr_t`, which may be 32- or 64-bit.
Thus add an `into()` call to support the 32-bit case, while allowing the
Clippy lint that complains in the 64-bit case where the type is the same.
Fixes: cdeaeb9dd762 ("drm: nova-drm: add initial driver skeleton")
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Reviewed-by: Christian Schrefl <chrisi.schrefl@gmail.com>
Link: https://lore.kernel.org/r/20250724165441.2105632-1-ojeda@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
While trying to fill a random RSS key, the size of the pointer
is being used rather than the actual size of the RSS key.
Fix by passing an appropriate value of the RSS key.
This issue was reported by static coverity analyser.
Fixes: eb4898fde1de8 ("net: libwx: add wangxun vf common api")
Signed-off-by: Chandra Mohan Sundar <chandramohan.explore@gmail.com>
Link: https://patch.msgid.link/20250814163014.613004-1-chandramohan.explore@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add formatting directive line in function `drm_gpuvm_sm_map_exec_lock()`
comment to clear warning messages shown bellow that appears generating
documentation `make htmldocs`.
Warning: ./drivers/gpu/drm/drm_gpuvm.c:2444: Unexpected indentation.
Warning: ./drivers/gpu/drm/drm_gpuvm.c:2446: Block quote ends without a blank line; unexpected unindent.
Warning: ./drivers/gpu/drm/drm_gpuvm.c:2450: Definition list ends without a blank line; unexpected unindent.
Warning: ./drivers/gpu/drm/drm_gpuvm.c:2451: Definition list ends without a blank line; unexpected unindent.
Warning: ./drivers/gpu/drm/drm_gpuvm.c:2455: Unexpected indentation.
Warning: ./drivers/gpu/drm/drm_gpuvm.c:2456: Definition list ends without a blank line; unexpected unindent.
Warning: ./drivers/gpu/drm/drm_gpuvm.c:2457: Definition list ends without a blank line; unexpected unindent.
Warning: ./drivers/gpu/drm/drm_gpuvm.c:2458: Definition list ends without a blank line; unexpected unindent.
Fixes: 471920ce25d5 ("drm/gpuvm: Add locking helpers")
Signed-off-by: Javier Garcia <rampxxxx@gmail.com>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250810150706.305040-1-rampxxxx@gmail.com
[ Fix typo in commit message. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Replace kfree() with kvfree() for memory allocated by kvmalloc().
Compile-tested only.
Cc: stable@vger.kernel.org
Fixes: 8a8b1ec5261f ("drm/nouveau/gsp: split rpc handling out on its own")
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Acked-by: Zhi Wang <zhiw@nvidia.com>
Link: https://lore.kernel.org/r/20250813125412.96178-1-rongqianfeng@vivo.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- hci_conn: Fix running bis_cleanup for hci_conn->type PA_LINK
- hci_conn: Fix not cleaning up Broadcaster/Broadcast Source
- hci_core: Fix using {cis,bis}_capable for current settings
- hci_core: Fix using ll_privacy_capable for current settings
- hci_core: Fix not accounting for BIS/CIS/PA links separately
- hci_conn: do return error from hci_enhanced_setup_sync()
- hci_event: fix MTU for BN == 0 in CIS Established
- hci_sync: Fix scan state after PA Sync has been established
- hci_sync: Avoid adding default advertising on startup
- hci_sync: Prevent unintended PA sync when SID is 0xFF
- ISO: Fix getname not returning broadcast fields
- btmtk: Fix wait_on_bit_timeout interruption during shutdown
- btnxpuart: Uses threaded IRQ for host wakeup handling
* tag 'for-net-2025-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: hci_core: Fix not accounting for BIS/CIS/PA links separately
Bluetooth: btnxpuart: Uses threaded IRQ for host wakeup handling
Bluetooth: hci_conn: do return error from hci_enhanced_setup_sync()
Bluetooth: hci_event: fix MTU for BN == 0 in CIS Established
Bluetooth: hci_sync: Prevent unintended PA sync when SID is 0xFF
Bluetooth: hci_core: Fix using ll_privacy_capable for current settings
Bluetooth: hci_core: Fix using {cis,bis}_capable for current settings
Bluetooth: btmtk: Fix wait_on_bit_timeout interruption during shutdown
Bluetooth: hci_conn: Fix not cleaning up Broadcaster/Broadcast Source
Bluetooth: hci_conn: Fix running bis_cleanup for hci_conn->type PA_LINK
Bluetooth: ISO: Fix getname not returning broadcast fields
Bluetooth: hci_sync: Fix scan state after PA Sync has been established
Bluetooth: hci_sync: Avoid adding default advertising on startup
====================
Link: https://patch.msgid.link/20250815142229.253052-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
By default, the device does not forward IPv4 packets with a link-local
source IP (i.e., 169.254.0.0/16). This behavior does not align with the
kernel which does forward them.
Fix by instructing the device to forward such packets instead of
dropping them.
Fixes: ca360db4b825 ("mlxsw: spectrum: Disable DIP_LINK_LOCAL check in hardware pipeline")
Reported-by: Zoey Mertes <zoey@cloudflare.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/6721e6b2c96feb80269e72ce8d0b426e2f32d99c.1755174341.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull block fixes from Jens Axboe:
- Fix for unprivileged daemons in ublk
- Speedup ublk release by removing unnecessary quiesce
- Fix for blk-wbt, where a regression caused it to not be possible to
enable at runtime
- blk-wbt cleanups
- Kill the page pool from drbd
- Remove redundant __GFP_NOWARN uses in a few spots
- Fix for a kobject double initialization issues
* tag 'block-6.17-20250815' of git://git.kernel.dk/linux:
block: restore default wbt enablement
Docs: admin-guide: Correct spelling mistake
blk-wbt: doc: Update the doc of the wbt_lat_usec interface
blk-wbt: Eliminate ambiguity in the comments of struct rq_wb
blk-wbt: Optimize wbt_done() for non-throttled writes
block: fix kobject double initialization in add_disk
blk-cgroup: remove redundant __GFP_NOWARN
block, bfq: remove redundant __GFP_NOWARN
ublk: check for unprivileged daemon on each I/O fetch
ublk: don't quiesce in ublk_ch_release
drbd: Remove the open-coded page pool
|
|
Commit
7ffeb2fc2670 ("x86/sev: Document requirement for linear mapping of guest request buffers")
added a check that requires the guest request buffers to be in the linear
mapping. The get_derived_key() function was passing a buffer that was
allocated on the stack, resulting in the call to snp_send_guest_request()
returning an error.
Update the get_derived_key() function to use an allocated buffer instead
of a stack buffer.
Fixes: 7ffeb2fc2670 ("x86/sev: Document requirement for linear mapping of guest request buffers")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/9b764ca9fc79199a091aac684c4926e2080ca7a8.1752698495.git.thomas.lendacky@amd.com
|
|
This replaces devm_request_irq() with devm_request_threaded_irq().
On iMX93 11x11 EVK platform, the BT chip's BT_WAKE_OUT pin is connected
to an I2C GPIO expander instead of directly been connected to iMX GPIO.
When I2C GPIO expander's (PCAL6524) host driver receives an interrupt on
it's INTR line, the driver's interrupt handler needs to query the
interrupt source with PCAL6524 first, and then call the actual interrupt
handler, in this case the IRQ handler in BTNXPUART.
In order to handle interrupts when such I2C GPIO expanders are between
the host and interrupt source, devm_request_threaded_irq() is needed.
This commit also removes the IRQF_TRIGGER_FALLING flag, to allow setting
the IRQ trigger type from the device tree setting instead of hardcoding
in the driver.
Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com>
Reviewed-by: Sherry Sun <sherry.sun@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fix from Bartosz Golaszewski:
- fix the way optional interrupts are retrieved from firmware in
gpio-mlxbf3
* tag 'gpio-fixes-for-v6.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: mlxbf3: use platform_get_irq_optional()
Revert "gpio: mlxbf3: only get IRQ for device instance 0"
|
|
During the shutdown process, an interrupt occurs that
prematurely terminates the wait for the expected event.
This change replaces TASK_INTERRUPTIBLE with
TASK_UNINTERRUPTIBLE in the wait_on_bit_timeout call to ensure
the shutdown process completes as intended without being
interrupted by signals.
Fixes: d019930b0049 ("Bluetooth: btmtk: move btusb_mtk_hci_wmt_sync to btmtk.c")
Signed-off-by: Jiande Lu <jiande.lu@mediatek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain fix from Ulf Hansson:
- tegra: Ensure pmc power-domains are in a known state
* tag 'pmdomain-v6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
soc/tegra: pmc: Ensure power-domains are in a known state
|
|
Sparse reported a warning:
drivers/iommu/arm/arm-smmu-v3/tegra241-cmdqv.c:305:47:
sparse: expected restricted __le64
sparse: got unsigned long long
Add cpu_to_le64() to fix that.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202508142105.Jb5Smjsg-lkp@intel.com/
Suggested-by: Pranjal Shrivastava <praan@google.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/20250814193039.2265813-1-nicolinc@nvidia.com
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
While the kernel command line is considered trusted in most environments,
avoid writing 1 byte past the end of "acpiid" if the "str" argument is
maximum length.
Reported-by: Simcha Kosman <simcha.kosman@cyberark.com>
Closes: https://lore.kernel.org/all/AS8P193MB2271C4B24BCEDA31830F37AE84A52@AS8P193MB2271.EURP193.PROD.OUTLOOK.COM
Fixes: b6b26d86c61c ("iommu/amd: Add a length limitation for the ivrs_acpihid command-line parameter")
Signed-off-by: Kees Cook <kees@kernel.org>
Reviewed-by: Ankit Soni <Ankit.Soni@amd.com>
Link: https://lore.kernel.org/r/20250804154023.work.970-kees@kernel.org
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
The qla4xxx_get_ep_fwdb() function is supposed to return NULL on error,
but qla4xxx_ep_connect() returns error pointers. Propagating the error
pointers will lead to an Oops in the caller, so change the error pointers
to NULL.
Fixes: 13483730a13b ("[SCSI] qla4xxx: fix flash/ddb support")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/aJwnVKS9tHsw1tEu@stanley.mountain
Reviewed-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Add PCI ID to support Intel Wildcat Lake, same as MTL.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20250812130259.109645-1-adrian.hunter@intel.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
devm_drm_bridge_alloc() returns ERR_PTR on failure instead of a
NULL pointer, so use IS_ERR() to check the returned pointer.
While at it, on failure, return ERR_CAST(dp) instead of
ERR_PTR(-ENOMEM) in order not to depend on devm_drm_bridge_alloc()
error code implementation.
Fixes: 48f05c3b4b70 ("drm/bridge: analogix_dp: Use devm_drm_bridge_alloc() API")
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://lore.kernel.org/r/20250806095224.527938-1-victor.liu@nxp.com
|
|
struct mempool doesn't currently exist, and thus also isn't used in
fnic.h, remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250812082808.371119-1-hch@lst.de
Reviewed-by: Karan Tilak Kumar <kartilak@cisco.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire fixes from Takashi Sakamoto:
"This fixes a potential call to schedule() within an RCU read-side
critical section. The solution applies reference counting to ensure
that handlers which may call schedule() are invoked safely outside of
the critical section"
* tag 'firewire-fixes-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: core: reallocate buffer for FCP address handlers when more than 4 are registered
firewire: core: call FCP address handlers outside RCU read-side critical section
firewire: core: call handler for exclusive regions outside RCU read-side critical section
firewire: core: use reference counting to invoke address handlers safely
|
|
The CRC error bit is located at bit 17 in the Rx descriptor, but the
driver was incorrectly using bit 16. Fix it.
Fixes: a36e9f5cfe9e ("rtase: Add support for a pci table in this module")
Signed-off-by: Justin Lai <justinlai0215@realtek.com>
Link: https://patch.msgid.link/20250813071631.7566-1-justinlai0215@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Submit multiple descriptors in axienet_rx_cb() to fill Rx skb ring. This
ensures the ring "catches up" on previously missed allocations.
Increment Rx skb ring head pointer after BD is successfully allocated.
Previously, head pointer was incremented before verifying if descriptor is
successfully allocated and has valid entries, which could lead to ring
state inconsistency if descriptor setup failed.
These changes improve reliability by maintaining adequate descriptor
availability and ensuring proper ring buffer state management.
Fixes: 6a91b846af85 ("net: axienet: Introduce dmaengine support")
Signed-off-by: Suraj Gupta <suraj.gupta2@amd.com>
Link: https://patch.msgid.link/20250813135559.1555652-1-suraj.gupta2@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
- Some more xe_migrate_access_memory fixes (Auld)
- Defer buffer object shrinker write-backs and GPU waits (Thomas)
- HWMON fix for clamping limits (Karthik)
- SRIOV-PF: Set VF LMEM BAR size (Michal)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/aJ4MIZQurSo0uNxn@intel.com
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes
- Fix the implementation of wa_18038517565 [fbc] (Vinod Govindapillai)
- Do not trigger Frame Change events from frontbuffer flush [psr] (Jouni Högander)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Tvrtko Ursulin <tursulin@igalia.com>
Link: https://lore.kernel.org/r/aJ0HAh06VHWVdv63@linux
|
|
Enable the previously added mitigation for VMscape. Add the cmdline
vmscape={off|ibpb|force} and sysfs reporting.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These restore corner case behavior of the EC driver related to the
handling of defective ACPI tables and fix a recent regression in the
ACPI processor driver:
- Prevent the ACPI EC driver from ignoring ECDT information in the
cases when the ID string in the ECDT is invalid, but not empty, to
fix thouchpad detection on ThinkBook 14 G7 IML (Armin Wolf)
- Rearrange checks in acpi_processor_ppc_init() to restore the
handling of frequency QoS requests related to _PPC limits
inadvertently broken by a recent update (Rafael Wysocki)"
* tag 'acpi-6.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: EC: Relax sanity check of the ECDT ID string
ACPI: processor: perflib: Move problematic pr->performance check
|
