summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2014-02-13hvc: ensure hvc_init is only ever called once in hvc_console.cPaul Gortmaker1-1/+5
Commit 3e6c6f630a5282df8f3393a59f10eb9c56536d23 ("Delay creation of khcvd thread") moved the call of hvc_init from being a device_initcall into hvc_alloc, and used a non-null hvc_driver as indication of whether hvc_init had already been called. The problem with this is that hvc_driver is only assigned a value at the bottom of hvc_init, and so there is a window where multiple hvc_alloc calls can be in progress at the same time and hence try and call hvc_init multiple times. Previously the use of device_init guaranteed that hvc_init was only called once. This manifests itself as sporadic instances of two hvc_init calls racing each other, and with the loser of the race getting -EBUSY from tty_register_driver() and hence that virtual console fails: Couldn't register hvc console driver virtio-ports vport0p1: error -16 allocating hvc for port Here we add an atomic_t to guarantee we'll never run hvc_init twice. Cc: stable@vger.kernel.org # v2.6.24+ Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Fixes: 3e6c6f630a52 ("Delay creation of khcvd thread") Reported-by: Jim Somerville <Jim.Somerville@windriver.com> Tested-by: Jim Somerville <Jim.Somerville@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13serial: sirf: move to use generic dma dt-binding to get dma channelsQipan Li2-138/+62
instead of using sirf specific dma channel property like "sirf,uart-dma-rx-channel" and "sirf,uart-dma-tx-channel", here we move to use generic dma dt-binding to get the channel like: - sirf,uart-dma-rx-channel = <21>; - sirf,uart-dma-tx-channel = <2>; + dmas = <&dmac1 5>, <&dmac0 2>; + dma-names = "rx", "tx"; and we move dma_request_channel() to dma_request_slave_channel(), we don't need to call sirfsoc dma filter function sirfsoc_dma_filter_id() again. Signed-off-by: Qipan Li <Qipan.Li@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13serial: pl011: Move uart_register_driver call to device probeTushar Behera1-9/+12
uart_register_driver call binds the driver to a specific device node through tty_register_driver call. This should typically happen during device probe call. In a multiplatform scenario, it is possible that multiple serial drivers are part of the kernel. Currently the driver registration fails if multiple serial drivers with same default major/minor numbers are included in the kernel. A typical case is observed with amba-pl011 and samsung-uart drivers. Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13serial: samsung: Move uart_register_driver call to device probeTushar Behera1-29/+11
uart_register_driver call binds the driver to a specific device node through tty_register_driver call. This should typically happen during device probe call. In a multiplatform scenario, it is possible that multiple serial drivers are part of the kernel. Currently the driver registration fails if multiple serial drivers with same default major/minor numbers are included in the kernel. A typical case is observed with amba-pl011 and samsung-uart drivers. Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13serial: max310x: Fix build warningAlexander Shiyan1-1/+1
config: x86_64-randconfig-x006 (attached as .config) All warnings: drivers/tty/serial/max310x.c: In function 'max310x_probe': >> drivers/tty/serial/max310x.c:1240:1: warning: label 'out_uart' defined but not used [-Wunused-label] Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13serial: max310x: Fix build errorAlexander Shiyan1-1/+2
config: make ARCH=alpha allyesconfig All error/warnings: drivers/tty/serial/max310x.c: In function 'max310x_ioctl': >> drivers/tty/serial/max310x.c:905:7: error: 'TIOCSRS485' undeclared (first use in this function) drivers/tty/serial/max310x.c:905:7: note: each undeclared identifier is reported only once for each function it appears in >> drivers/tty/serial/max310x.c:906:3: error: implicit declaration of function 'copy_from_user' [-Werror=implicit-function-declaration] >> drivers/tty/serial/max310x.c:929:7: error: 'TIOCGRS485' undeclared (first use in this function) >> drivers/tty/serial/max310x.c:938:3: error: implicit declaration of function 'copy_to_user' [-Werror=implicit-function-declaration] cc1: some warnings being treated as errors Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13serial: imx: always wake up the processes in the TX callbackHuang Shijie1-2/+1
The current code only wakes up the processes when the circle buffer has less data then the WAKEUP_CHARS. But sometimes, the circle buffer may has data more then the WAKEUP_CHARS, in such case, the processes will hang. This patch makes it always wakes up the processes in the TX callback. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13tty/serial: atmel_serial: remove dev_dbg in atmel_set_termiosNicolas Ferre1-3/+0
This fixes a driver bug which stopped the whole system (in case of serial console). This log message is not useful anyway as this information is printed elsewhere. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13n_tty: Simplify input_available_p()Peter Hurley1-7/+4
Greg, Please note this patch requires n_tty: Fix poll() when TIME_CHAR and MIN_CHAR == 0 Regards, Peter Hurley Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13Merge branch 'tty-linus' into tty-nextGreg Kroah-Hartman12-60/+70
We want the tty core fixes in here as well, because other patches depend on them. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13serial: 8250: Support XR17V35x fraction divisorJoe Schultz1-0/+18
The Exar XR17V35x family of UARTs have an additional fractional divisor register (DLD) which was not being used. Calculate and set this register for these devices to reduce their baud rate error. Signed-off-by: Joe Schultz <jschultz@xes-inc.com> Signed-off-by: Aaron Sierra <asierra@xes-inc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13n_tty: Fix stale echo outputPeter Hurley1-5/+7
When echoes cannot be flushed to output (usually because the tty has no more write room) and L_ECHO is subsequently turned off, then when L_ECHO is turned back on, stale echoes are output. Output completed echoes regardless of the L_ECHO setting: 1. before normal writes to that tty 2. if the tty was stopped by soft flow control and is being restarted Reported-by: Mikulas Patocka <mpatocka@redhat.com> Cc: <stable@vger.kernel.org> # 3.13.x Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13serial: sirf: fix kernel panic caused by unpaired spinlockQipan Li1-1/+3
commit 8b9ade9f74f8a279 coming from Viresh Kumar "tty: serial: sirfsoc: drop uart_port->lock before calling tty_flip_buffer_push()" broke sirfsoc uart driver by knic: [ 5.129122] BUG: spinlock already unlocked on CPU#0, ip6tables/1331 [ 5.132554] lock: sirfsoc_uart_ports+0x4/0x8a0, .magic: dead4ead, .owner: <none>/-1, .owner_cpu: -1 [ 5.141651] CPU: 0 PID: 1331 Comm: ip6tables Tainted: G W O 3.10.16 #3 [ 5.148866] [<c0013528>] (unwind_backtrace+0x0/0xe0) from [<c0010e70>] (show_stack+0x10/0x14) [ 5.157362] [<c0010e70>] (show_stack+0x10/0x14) from [<c01a5e68>] (do_raw_spin_unlock+0x40/0xc8) [ 5.166125] [<c01a5e68>] (do_raw_spin_unlock+0x40/0xc8) from [<c03ff8b4>] (_raw_spin_unlock+0x8/0x40) [ 5.175322] [<c03ff8b4>] (_raw_spin_unlock+0x8/0x40) from [<c0203fcc>] (sirfsoc_uart_pio_rx_chars+0xa4/0xc0) [ 5.185120] [<c0203fcc>] (sirfsoc_uart_pio_rx_chars+0xa4/0xc0) from [<c0204fb8>] (sirfsoc_rx_tmo_process_tl+0xdc/0x1e0) [ 5.195875] [<c0204fb8>] (sirfsoc_rx_tmo_process_tl+0xdc/0x1e0) from [<c0024b50>] (tasklet_action+0x8c/0xec) [ 5.205673] [<c0024b50>] (tasklet_action+0x8c/0xec) from [<c00242a8>] (__do_softirq+0xec/0x1d4) [ 5.214347] [<c00242a8>] (__do_softirq+0xec/0x1d4) from [<c0024428>] (do_softirq+0x48/0x54) [ 5.222674] [<c0024428>] (do_softirq+0x48/0x54) from [<c0024690>] (irq_exit+0x74/0xc0) [ 5.230573] [<c0024690>] (irq_exit+0x74/0xc0) from [<c000e1e8>] (handle_IRQ+0x6c/0x90) [ 5.238465] [<c000e1e8>] (handle_IRQ+0x6c/0x90) from [<c000d500>] (__irq_svc+0x40/0x70) [ 5.246446] [<c000d500>] (__irq_svc+0x40/0x70) from [<c0092e7c>] (mark_page_accessed+0xc/0x68) [ 5.255034] [<c0092e7c>] (mark_page_accessed+0xc/0x68) from [<c00a2a4c>] (unmap_single_vma+0x3bc/0x550) [ 5.264402] [<c00a2a4c>] (unmap_single_vma+0x3bc/0x550) from [<c00a3b4c>] (unmap_vmas+0x44/0x54) [ 5.273164] [<c00a3b4c>] (unmap_vmas+0x44/0x54) from [<c00a81a8>] (exit_mmap+0xc4/0x1e0) [ 5.281233] [<c00a81a8>] (exit_mmap+0xc4/0x1e0) from [<c001bb78>] (mmput+0x3c/0xdc) [ 5.288868] [<c001bb78>] (mmput+0x3c/0xdc) from [<c0021b0c>] (do_exit+0x30c/0x828) [ 5.296413] [<c0021b0c>] (do_exit+0x30c/0x828) from [<c0022dac>] (do_group_exit+0x4c/0xb0) [ 5.304653] [<c0022dac>] (do_group_exit+0x4c/0xb0) from [<c0022e20>] (__wake_up_parent+0x0/0x18) Root cause: the commit dropped uart_port->lock before calling tty_flip_buffer_push(), but in sirfsoc-uart, sirfsoc_uart_pio_rx_chars() can be called by sirfsoc_rx_tmo_process_tl(). here uart_port->lock has not been taken yet. so that caused unpaired lock/unlock. Solution: This patch is doing a quick fix for that, it adds spin_lock/unlock(&port->lock) protect to sirfsoc_uart_pio_rx_chars() in sirfsoc_rx_tmo_process_tl() to keep spin_lock/unlock in pair. Signed-off-by: Qipan Li <Qipan.Li@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Cc: stable <stable@vger.kernel.org> # 3.12 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13serial: 8250_pci: unbreak last serial ports on NetMos 9865 cardsDmitry Eremin-Solenikov1-1/+2
Aparently 9865 uses standard BAR encoding scheme (unlike 99xx cards). Current pci_netmos_9900_setup() uses wrong BAR indices for the 9865 PCI device, function 2. Using standard BAR indices makes all 6 ports work for me. Thus disable the NetMos 9900 quirk for NetMos 9865 pci device. For the reference, here is the relevant part of lspci for my device: 02:07.0 Serial controller: MosChip Semiconductor Technology Ltd. PCI 9865 Multi-I/O Controller (prog-if 02 [16550]) Subsystem: Device a000:1000 Flags: bus master, medium devsel, latency 32, IRQ 17 I/O ports at ac00 [size=8] Memory at fcfff000 (32-bit, non-prefetchable) [size=4K] Memory at fcffe000 (32-bit, non-prefetchable) [size=4K] Capabilities: [48] Power Management version 2 Kernel driver in use: serial 02:07.1 Serial controller: MosChip Semiconductor Technology Ltd. PCI 9865 Multi-I/O Controller (prog-if 02 [16550]) Subsystem: Device a000:1000 Flags: bus master, medium devsel, latency 32, IRQ 18 I/O ports at a800 [size=8] Memory at fcffd000 (32-bit, non-prefetchable) [size=4K] Memory at fcffc000 (32-bit, non-prefetchable) [size=4K] Capabilities: [48] Power Management version 2 Kernel driver in use: serial 02:07.2 Communication controller: MosChip Semiconductor Technology Ltd. PCI 9865 Multi-I/O Controller Subsystem: Device a000:3004 Flags: bus master, medium devsel, latency 32, IRQ 19 I/O ports at a400 [size=8] I/O ports at a000 [size=8] I/O ports at 9c00 [size=8] I/O ports at 9800 [size=8] Memory at fcffb000 (32-bit, non-prefetchable) [size=4K] Capabilities: [48] Power Management version 2 Kernel driver in use: serial Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13n_tty: Fix poll() when TIME_CHAR and MIN_CHAR == 0Peter Hurley1-1/+1
Commit eafbe67f84761d787802e5113d895a316b6292fe, n_tty: Refactor input_available_p() by call site broke poll() when TIME_CHAR(tty) and MIN_CHAR(tty) are both 0. When TIME_CHAR and MIN_CHAR are both 0, input is available if the read_cnt is 1 (not 0). Reported-by: Eric Dumazet <edumazet@google.com> Tested-by: Eric Dumazet <edumazet@google.com> Reported-by: Stephane Eranian <eranian@google.com> Tested-by: David Ahern <dsahern@gmail.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13serial: omap: fix rs485 probe on defered pinctrlMichael Grzeschik1-1/+4
If the gpio is not yet available we better also defer the probing in the rs485 case. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13serial: 8250_dw: fix compilation warning when !CONFIG_PM_SLEEPMika Westerberg1-2/+2
CONFIG_PM will be set if either or both CONFIG_PM_SLEEP and CONFIG_PM_RUNTIME is set. Compiling the driver with !CONFIG_PM_SLEEP causes following compilation warnings: drivers/tty/serial/8250/8250_dw.c:404:12: warning: ‘dw8250_suspend’ defined but not used [-Wunused-function] drivers/tty/serial/8250/8250_dw.c:413:12: warning: ‘dw8250_resume’ defined but not used [-Wunused-function] Fix this by using CONFIG_PM_SLEEP instead. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13serial: omap-serial: Move info message to probe functionMarkus Pargmann1-3/+3
Currently the info message about a missing wakeirq for uart is printed every time the serial driver's startup function is called. This happens multiple times and not just once. This can cause lots of extra messages at boot time, slowing things down. It is caused by commit 2a0b965cfb6e (serial: omap: Add support for optional wake-up) which was applied for v3.13-rc1. This patch moves the infomessage to the probe function to display it only once. Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: stable <stable@vger.kernel.org> # 3.13 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13serial: max310x: Add devicetree supportAlexander Shiyan1-9/+32
This patch adds devicetree support for the MAX310X serial driver. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13serial: max310x: Driver cleanupAlexander Shiyan1-29/+5
This patch removes some unused definitions from driver code and sort #includes alphabetically. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13serial: max310x: Add support for RS-485 modeAlexander Shiyan1-21/+56
This patch adds support for RS-485 (TIOCSRS485/TIOCGRS485) IOCTLs. As a result this patch eliminate private driver header. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13serial: max310x: Add missing mutex_destroy() on driver exitAlexander Shiyan1-2/+5
Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13serial: max310x: Always use dynamic GPIO ID assignmentAlexander Shiyan1-27/+28
Always register GPIOs and use dynamic GPIO ID assignment. This is no much worth if GPIOs is not used, but helps remove private driver header and add DT support in the future. Additionally, patch adds missing uart_unregister_driver() call if probe() fails. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13serial: max310x: Migrate to CLK APIAlexander Shiyan1-31/+55
This patch removes "frequency" parameter from MAX310X platform_data and uses CLK API for getting clock. Clock type (XTAL/OSC) is determined by clk name. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13serial: max310x: Move all SPI-dependent stuff in one placeAlexander Shiyan1-32/+24
Patch move all SPI-dependent stuff in one place. This include move PM-function definitions out of CONFIG_SPI_MASTER and move regmap initialization out of common probe into CONFIG_SPI_MASTER which may help to add I2C support in the future for this driver. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13serial: sh_sci: remove HAVE_CLK build dependecyBaruch Siach1-1/+0
Since 93abe8e4 (clk: add non CONFIG_HAVE_CLK routines) code using clk.h like this driver needs not depend on HAVE_CLK. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13serial: max310x: Remove IRQ validationAlexander Shiyan1-6/+0
This patch removes excess IRQ checks at driver probe(). IRQ validation is already provided by request_threaded_irq(). Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13serial: max310x: Add the loopback mode supportAlexander Shiyan1-7/+18
This patch replaces loopback mode support from platform data to dynamic setup with TIOCMSET ioctl. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13serial: max310x: Remove excess port configure at startupAlexander Shiyan1-6/+0
Serial core calls set_termios() after port startup, so there are no reason to setup port twice. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13serial: max310x: Remove init() and exit() callbacksAlexander Shiyan1-7/+0
These callbacks were previously used for the IC power initialization. If this initialization will be needed in the future, it should be implemented with the regulator API. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13serial: max310x: Setup baud rate generator more preciselyAlexander Shiyan1-12/+20
This patch provide more precisely setup of baud rate generator. If the result of division has a remainder, we use the multiplier for the base frequency. Additionally, we report result baud rate back to serial core. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13serial: max310x: Allow driver to be compiled as moduleAlexander Shiyan1-1/+1
Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13serial: sh-sci: Restrict non-COMPILE_TEST compilationLaurent Pinchart1-1/+2
Hardware supported by the driver is only found on SUPERH or ARCH_SHMOBILE platforms. Restrict non-COMPILE_TEST compilation to them. Cc: linux-serial@vger.kernel.org Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13serial: pch_uart: Fix build warning when CONFIG_DEBUG_FS=nJingoo Han1-0/+2
Add CONFIG_DEBUG_FS to 'char name' in order to fix the following build warning, because 'char name' is used only when CONFIG_DEBUG_FS is enabled. drivers/tty/serial/pch_uart.c:1765:7: warning: unused variable 'name' [-Wunused-variable] Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13serial: sh-sci: Fix cast warningJingoo Han1-1/+1
Fix the following compile warning about cast to pointer from integer of different size. drivers/tty/serial/sh-sci.c:2021:19: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13serial: omap-serial: Move info message to probe functionMarkus Pargmann1-3/+3
Currently the info message about a missing wakeirq for uart is printed every time the serial driver's startup function is called. This happens multiple times and not just once. This patch moves the infomessage to the probe function to display it only once. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-12msm_serial: Add support for poll_{get,put}_char()Stephen Boyd2-3/+146
Implement the polling functionality for the MSM serial driver. This allows us to use KGDB on this hardware. Cc: David Brown <davidb@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-10Merge branch 'for-linus' of ↵Linus Torvalds1-6/+3
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs fixes from Al Viro: "A couple of fixes, both -stable fodder. The O_SYNC bug is fairly old..." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fix a kmap leak in virtio_console fix O_SYNC|O_APPEND syncing the wrong range on write()
2014-02-10fix a kmap leak in virtio_consoleAl Viro1-6/+3
While we are at it, don't do kmap() under kmap_atomic(), *especially* for a page we'd allocated with GFP_KERNEL. It's spelled "page_address", and had that been more than that, we'd have a real trouble - kmap_high() can block, and doing that while holding kmap_atomic() is a Bad Idea(tm). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-02-09Merge tag 'pinctrl-v3.14-2' of ↵Linus Torvalds6-15/+32
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pinctrl fixes from Linus Walleij: "First round of pin control fixes for v3.14: - Protect pinctrl_list_add() with the proper mutex. This was identified by RedHat. Caused nasty locking warnings was rootcased by Stanislaw Gruszka. - Avoid adding dangerous debugfs files when either half of the subsystem is unused: pinmux or pinconf. - Various fixes to various drivers: locking, hardware particulars, DT parsing, error codes" * tag 'pinctrl-v3.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: tegra: return correct error type pinctrl: do not init debugfs entries for unimplemented functionalities pinctrl: protect pinctrl_list add pinctrl: sirf: correct the pin index of ac97_pins group pinctrl: imx27: fix offset calculation in imx_read_2bit pinctrl: vt8500: Change devicetree data parsing pinctrl: imx27: fix wrong offset to ICONFB pinctrl: at91: use locked variant of irq_set_handler
2014-02-08watchdog: dw_wdt: Add dependency on HAS_IOMEMRichard Weinberger1-0/+1
On archs like S390 or um this driver cannot build nor work. Make it depend on HAS_IOMEM to bypass build failures. drivers/built-in.o: In function `dw_wdt_drv_probe': drivers/watchdog/dw_wdt.c:302: undefined reference to `devm_ioremap_resource' Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-02-08Merge branch 'v4l_for_linus' of ↵Linus Torvalds31-71/+83
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: "A series of small fixes. Mostly driver ones. There is one core regression fix on a patch that was meant to fix some race issues on vb2, but that actually caused more harm than good. So, we're just reverting it for now" * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] adv7842: Composite free-run platfrom-data fix [media] v4l2-dv-timings: fix GTF calculation [media] hdpvr: Fix memory leak in debug [media] af9035: add ID [2040:f900] Hauppauge WinTV-MiniStick 2 [media] mxl111sf: Fix compile when CONFIG_DVB_USB_MXL111SF is unset [media] mxl111sf: Fix unintentional garbage stack read [media] cx24117: use a valid dev pointer for dev_err printout [media] cx24117: remove dead code in always 'false' if statement [media] update Michael Krufky's email address [media] vb2: Check if there are buffers before streamon [media] Revert "[media] videobuf_vm_{open,close} race fixes" [media] go7007-loader: fix usb_dev leak [media] media: bt8xx: add missing put_device call [media] exynos4-is: Compile in fimc-lite runtime PM callbacks conditionally [media] exynos4-is: Compile in fimc runtime PM callbacks conditionally [media] exynos4-is: Fix error paths in probe() for !pm_runtime_enabled() [media] s5p-jpeg: Fix wrong NV12 format parameters [media] s5k5baf: allow to handle arbitrary long i2c sequences
2014-02-08Merge tag 'hwmon-for-linus' of ↵Linus Torvalds2-36/+36
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: "Fix PMBus driver problem with some multi-page voltage sensors and fix da9055 interrupt initialization" * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (da9055) Remove use of regmap_irq_get_virq() hwmon: (pmbus) Support per-page exponent in linear mode
2014-02-08Merge tag 'pm+acpi-3.14-rc2' of ↵Linus Torvalds7-23/+75
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management fixes from Rafael Wysocki: "These include a fix for a recent ACPI hotplug regression, four concurrency related fixes and one PCI device removal fix for ACPI-based PCI hotplug (ACPIPHP), intel_pstate fix that should go into stable, three simple ACPI cleanups and a new entry for the ACPI video blacklist. Specifics: - Fix for a recent ACPI hotplug regression causing a NULL pointer dereference to occur while handling ACPI eject notifications for already ejected devices. From Toshi Kani. - Four concurrency-related fixes for ACPIPHP. Two of them add missing locking and the other two fix race conditions related to reference counting. - ACPIPHP fix to avoid NULL pointer dereferences during device removal involving Virtual Funcions. - intel_pstate fix to make it compute the percentage of time the CPU is busy properly. From Dirk Brandewie. - Removal of two unnecessary NULL pointer checks in ACPI code and a fix for sscanf() format string from Dan Carpenter and Luis G.F. - New ACPI video blacklist entry for HP EliteBook Revolve 810 from Mika Westerberg" * tag 'pm+acpi-3.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / hotplug: Fix panic on eject to ejected device ACPI / battery: Fix incorrect sscanf() string in acpi_battery_init_alarm() ACPI / proc: remove unneeded NULL check ACPI / utils: remove a pointless NULL check ACPI / video: Add HP EliteBook Revolve 810 to the blacklist intel_pstate: Take core C0 time into account for core busy calculation ACPI / hotplug / PCI: Fix bridge removal race vs dock events ACPI / hotplug / PCI: Fix bridge removal race in handle_hotplug_event() ACPI / hotplug / PCI: Scan root bus under the PCI rescan-remove lock ACPI / hotplug / PCI: Move PCI rescan-remove locking to hotplug_event() ACPI / hotplug / PCI: Remove entries from bus->devices in reverse order
2014-02-07tty: Set correct tty name in 'active' sysfs attributeHannes Reinecke1-7/+18
The 'active' sysfs attribute should refer to the currently active tty devices the console is running on, not the currently active console. The console structure doesn't refer to any device in sysfs, only the tty the console is running on has. So we need to print out the tty names in 'active', not the console names. This resolves an issue on s390 platforms in determining the correct console device to use. Cc: Lennart Poettering <lennart@poettering.net> Cc: Kay Sievers <kay@vrfy.org> Cc: Jiri Slaby <jslaby@suse.cz> Cc: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Werner Fink <werner@suse.de> Signed-off-by: Hannes Reinecke <hare@suse.de> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-07tty: n_gsm: Fix for modems with brk in modem status controlLars Poeschel1-0/+11
3GPP TS 07.10 states in section 5.4.6.3.7: "The length byte contains the value 2 or 3 ... depending on the break signal." The break byte is optional and if it is sent, the length is 3. In fact the driver was not able to work with modems that send this break byte in their modem status control message. If the modem just sends the break byte if it is really set, then weird things might happen. The code for deconding the modem status to the internal linux presentation in gsm_process_modem has already a big comment about this 2 or 3 byte length thing and it is already able to decode the brk, but the code calling the gsm_process_modem function in gsm_control_modem does not encode it and hand it over the right way. This patch fixes this. Without this fix if the modem sends the brk byte in it's modem status control message the driver will hang when opening a muxed channel. Signed-off-by: Lars Poeschel <poeschel@lemonage.de> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-07drivers/tty/hvc: don't use module_init in non-modular hyp. console codePaul Gortmaker4-42/+4
The HVC_OPAL/RTAS/UDBG/XEN options are all bool, and hence their support is either present or absent. It will never be modular, so using module_init as an alias for __initcall is rather misleading. Fix this up now, so that we can relocate module_init from init.h into module.h in the future. If we don't do this, we'd have to add module.h to obviously non-modular code, and that would be a worse thing. Note that direct use of __initcall is discouraged, vs. one of the priority categorized subgroups. As __initcall gets mapped onto device_initcall, our use of device_initcall directly in this change means that the runtime impact is zero -- it will remain at level 6 in initcall ordering. Also the __exitcall functions have been outright deleted since they are only ever of interest to UML, and UML will never be using any of this code. Cc: Richard Weinberger <richard@nod.at> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-07hwmon: (da9055) Remove use of regmap_irq_get_virq()Adam Thomson1-4/+0
Remove use of regmap_irq_get_virq() in driver probe which was conflicting with use of platform_get_irq_byname(). platform_get_irq_byname() already returns the VIRQ number due to MFD core translation so using regmap_irq_get_virq() on that returned value results in an incorrect IRQ being requested. The driver probes then fail because of this. Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-02-07Merge branches 'acpi-cleanup' and 'acpi-video'Rafael J. Wysocki4-6/+10
* acpi-cleanup: ACPI / battery: Fix incorrect sscanf() string in acpi_battery_init_alarm() ACPI / proc: remove unneeded NULL check ACPI / utils: remove a pointless NULL check * acpi-video: ACPI / video: Add HP EliteBook Revolve 810 to the blacklist
2014-02-07Merge branch 'pm-cpufreq'Rafael J. Wysocki1-4/+17
* pm-cpufreq: intel_pstate: Take core C0 time into account for core busy calculation
generated by cgit v1.2.3 (git 2.39.0) at 2025-02-01 19:14:00 +0300