summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2017-08-30clk: sunxi-ng: Add interface to query or configure MMC timing modes.Chen-Yu Tsai3-0/+75
Starting with the A83T SoC, Allwinner introduced a new timing mode for its MMC clocks. The new mode changes how the MMC controller sample and output clocks are delayed to match chip and board specifics. There are two controls for this, one on the CCU side controlling how the clocks behave, and one in the MMC controller controlling what inputs to take and how to route them. In the old mode, the MMC clock had 2 child clocks providing the output and sample clocks, which could be delayed by a number of clock cycles measured from the MMC clock's parent. With the new mode, the 2 delay clocks are no longer active. Instead, the delays and associated controls are moved into the MMC controller. The output of the MMC clock is also halved. The difference in how things are wired between the modes means that the clock controls and the MMC controls must match. To achieve this in a clear, explicit way, we introduce two functions for the MMC driver to use: one queries the hardware for the current mode set, and the other allows the MMC driver to request a mode. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: renesas-sdhi: provide a whitelist for Gen3 SoC ES versionsSimon Horman2-0/+30
Provide a whitelist for Gen3 SoC ES versions for both the SYS DMAC and internal DMAC variants of the SDHI driver. This is to allow drivers to only initialise for Gen3 SoC ES versions for which they are the appropriate DMAC implementation. Currently internal DMAC is the appropriate implementation for all supported Gen3 SoC ES versions. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: core: correct taac parameter according to the specificationShawn Lin3-17/+17
Per the spec of JESD84-B51, section 7.3, replace tacc with taac to fix the obvious typo. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: sdhci-msm: add static to local functionsMasahiro Yamada1-2/+2
Detected by sparse. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: of_mmc_spi: fix restricted cast warning of sparseMasahiro Yamada1-1/+1
Sparse reports "warning: cast to restricted __be32". Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: bcm2835: constify mmc_host_ops structuresJulia Lawall1-1/+1
The mmc_host_ops structure is only stored in the ops field of an mmc_host structure, which is declared as const. Thus the mmc_host_ops structure itself can be const. Done with the help of Coccinelle. // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct mmc_host_ops i@p = { ... }; @ok1@ struct mmc_host *mmc; identifier r.i; position p; @@ mmc->ops = &i@p @bad@ position p != {r.p,ok1.p}; identifier r.i; struct mmc_host_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct mmc_host_ops i = { ... }; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: mediatek: constify mmc_host_ops structuresJulia Lawall1-1/+1
The mmc_host_ops structure is only stored in the ops field of an mmc_host structure, which is declared as const. Thus the mmc_host_ops structure itself can be const. Done with the help of Coccinelle. // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct mmc_host_ops i@p = { ... }; @ok1@ struct mmc_host *mmc; identifier r.i; position p; @@ mmc->ops = &i@p @bad@ position p != {r.p,ok1.p}; identifier r.i; struct mmc_host_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct mmc_host_ops i = { ... }; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: sdricoh_cs: constify mmc_host_ops structuresJulia Lawall1-1/+1
The mmc_host_ops structure is only stored in the ops field of an mmc_host structure, which is declared as const. Thus the mmc_host_ops structure itself can be const. Done with the help of Coccinelle. // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct mmc_host_ops i@p = { ... }; @ok1@ struct mmc_host *mmc; identifier r.i; position p; @@ mmc->ops = &i@p @bad@ position p != {r.p,ok1.p}; identifier r.i; struct mmc_host_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct mmc_host_ops i = { ... }; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: sunxi: constify mmc_host_ops structuresJulia Lawall1-1/+1
The mmc_host_ops structure is only stored in the ops field of an mmc_host structure, which is declared as const. Thus the mmc_host_ops structure itself can be const. Done with the help of Coccinelle. // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct mmc_host_ops i@p = { ... }; @ok1@ struct mmc_host *mmc; identifier r.i; position p; @@ mmc->ops = &i@p @bad@ position p != {r.p,ok1.p}; identifier r.i; struct mmc_host_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct mmc_host_ops i = { ... }; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: vub300: constify mmc_host_ops structuresJulia Lawall1-1/+1
The mmc_host_ops structure is only stored in the ops field of an mmc_host structure, which is declared as const. Thus the mmc_host_ops structure itself can be const. Done with the help of Coccinelle. // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct mmc_host_ops i@p = { ... }; @ok1@ struct mmc_host *mmc; identifier r.i; position p; @@ mmc->ops = &i@p @bad@ position p != {r.p,ok1.p}; identifier r.i; struct mmc_host_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct mmc_host_ops i = { ... }; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: usdhi6rol0: constify mmc_host_ops structuresJulia Lawall1-1/+1
The mmc_host_ops structure is only stored in the ops field of an mmc_host structure, which is declared as const. Thus the mmc_host_ops structure itself can be const. Done with the help of Coccinelle. // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct mmc_host_ops i@p = { ... }; @ok1@ struct mmc_host *mmc; identifier r.i; position p; @@ mmc->ops = &i@p @bad@ position p != {r.p,ok1.p}; identifier r.i; struct mmc_host_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct mmc_host_ops i = { ... }; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: toshsd: constify mmc_host_ops structuresJulia Lawall1-1/+1
The mmc_host_ops structure is only stored in the ops field of an mmc_host structure, which is declared as const. Thus the mmc_host_ops structure itself can be const. Done with the help of Coccinelle. // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct mmc_host_ops i@p = { ... }; @ok1@ struct mmc_host *mmc; identifier r.i; position p; @@ mmc->ops = &i@p @bad@ position p != {r.p,ok1.p}; identifier r.i; struct mmc_host_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct mmc_host_ops i = { ... }; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: sh_mmcif: constify mmc_host_ops structuresJulia Lawall1-1/+1
The mmc_host_ops structure is only stored in the ops field of an mmc_host structure, which is declared as const. Thus the mmc_host_ops structure itself can be const. Done with the help of Coccinelle. // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct mmc_host_ops i@p = { ... }; @ok1@ struct mmc_host *mmc; identifier r.i; position p; @@ mmc->ops = &i@p @bad@ position p != {r.p,ok1.p}; identifier r.i; struct mmc_host_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct mmc_host_ops i = { ... }; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: moxart: constify mmc_host_ops structuresJulia Lawall1-1/+1
The mmc_host_ops structure is only stored in the ops field of an mmc_host structure, which is declared as const. Thus the mmc_host_ops structure itself can be const. Done with the help of Coccinelle. // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct mmc_host_ops i@p = { ... }; @ok1@ struct mmc_host *mmc; identifier r.i; position p; @@ mmc->ops = &i@p @bad@ position p != {r.p,ok1.p}; identifier r.i; struct mmc_host_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct mmc_host_ops i = { ... }; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: davinci: constify mmc_host_ops structuresJulia Lawall1-1/+1
The mmc_host_ops structure is only stored in the ops field of an mmc_host structure, which is declared as const. Thus the mmc_host_ops structure itself can be const. Done with the help of Coccinelle. // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct mmc_host_ops i@p = { ... }; @ok1@ struct mmc_host *mmc; identifier r.i; position p; @@ mmc->ops = &i@p @bad@ position p != {r.p,ok1.p}; identifier r.i; struct mmc_host_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct mmc_host_ops i = { ... }; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: s3cmci: constify mmc_host_ops structuresJulia Lawall1-1/+1
The mmc_host_ops structure is only stored in the ops field of an mmc_host structure, which is declared as const. Thus the mmc_host_ops structure itself can be const. Done with the help of Coccinelle. // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct mmc_host_ops i@p = { ... }; @ok1@ struct mmc_host *mmc; identifier r.i; position p; @@ mmc->ops = &i@p @bad@ position p != {r.p,ok1.p}; identifier r.i; struct mmc_host_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct mmc_host_ops i = { ... }; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: wmt-sdmmc: constify mmc_host_ops structuresJulia Lawall1-1/+1
The mmc_host_ops structure is only stored in the ops field of an mmc_host structure, which is declared as const. Thus the mmc_host_ops structure itself can be const. Done with the help of Coccinelle. // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct mmc_host_ops i@p = { ... }; @ok1@ struct mmc_host *mmc; identifier r.i; position p; @@ mmc->ops = &i@p @bad@ position p != {r.p,ok1.p}; identifier r.i; struct mmc_host_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct mmc_host_ops i = { ... }; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30sdhci: pci: Fix up power if device has ACPI companionAndy Shevchenko1-0/+20
Fix up a power state in case PCI device has an ACPI companion. Do it only for Intel Merrifield for now. This is almost copy'n'paste of part of sdhci_acpi_probe() and might be split out to a helper function in the future. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30sdhci: acpi: Use new method to get ACPI companionAndy Shevchenko1-2/+2
ACPI_COMPANION() macro reduces a code to get a companion device out of struct device. Use it instead of an old method. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: sdhci-xenon: ignore timing DDR52 in tuningZhoujie Wu1-1/+2
Emmc DDR52 mode uses fixed delay, return earlier if timing is MMC_TIMING_MMC_DDR52 in execute tuning function. Signed-off-by: Zhoujie Wu <zjwu@marvell.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: tegra: explicitly request exclusive reset controlPhilipp Zabel1-1/+2
Commit a53e35db70d1 ("reset: Ensure drivers are explicit when requesting reset lines") started to transition the reset control request API calls to explicitly state whether the driver needs exclusive or shared reset control behavior. Convert all drivers requesting exclusive resets to the explicit API call so the temporary transition helpers can be removed. No functional changes. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: linux-mmc@vger.kernel.org Cc: linux-tegra@vger.kernel.org Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: sunxi: explicitly request exclusive reset controlPhilipp Zabel1-1/+2
Commit a53e35db70d1 ("reset: Ensure drivers are explicit when requesting reset lines") started to transition the reset control request API calls to explicitly state whether the driver needs exclusive or shared reset control behavior. Convert all drivers requesting exclusive resets to the explicit API call so the temporary transition helpers can be removed. No functional changes. Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Chen-Yu Tsai <wens@csie.org> Cc: linux-mmc@vger.kernel.org Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: sdhci-st: explicitly request exclusive reset controlPhilipp Zabel1-1/+1
Commit a53e35db70d1 ("reset: Ensure drivers are explicit when requesting reset lines") started to transition the reset control request API calls to explicitly state whether the driver needs exclusive or shared reset control behavior. Convert all drivers requesting exclusive resets to the explicit API call so the temporary transition helpers can be removed. No functional changes. Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: linux-mmc@vger.kernel.org Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: dw_mmc: explicitly request exclusive reset controlPhilipp Zabel1-1/+1
Commit a53e35db70d1 ("reset: Ensure drivers are explicit when requesting reset lines") started to transition the reset control request API calls to explicitly state whether the driver needs exclusive or shared reset control behavior. Convert all drivers requesting exclusive resets to the explicit API call so the temporary transition helpers can be removed. No functional changes. Cc: Jaehoon Chung <jh80.chung@samsung.com> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: linux-mmc@vger.kernel.org Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: Convert to using %pOF instead of full_nameRob Herring3-10/+8
Now that we have a custom printf format specifier, convert users of full_name to use %pOF instead. This is preparation to remove storing of the full path string for each node. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: Ludovic Desroches <ludovic.desroches@microchip.com> Cc: Jan Glauber <jglauber@cavium.com> Cc: David Daney <david.daney@cavium.com> Cc: "Steven J. Hill" <Steven.Hill@cavium.com> Cc: linux-mmc@vger.kernel.org Acked-by: David Daney <david.daney@cavium.com> Tested-by: Steven J. Hill <Steven.Hill@cavium.com> Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30MMC: Remove HIGHMEM dependency from mmc-spi driverIan Molton1-1/+1
I cannot see why this is needed. kmap() should be safe in this case. Signed-off-by: Ian Molton <ian@mnementh.co.uk> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: host: via-sdmmc: constify pci_device_id.Arvind Yadav1-1/+1
pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. File size before: text data bss dec hex filename 6952 880 0 7832 1e98 drivers/mmc/host/via-sdmmc.o File size After adding 'const': text data bss dec hex filename 7032 800 0 7832 1e98 drivers/mmc/host/via-sdmmc.o Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: sdhci: remove CONFIG_MMC_DEBUG from the driverShawn Lin1-8/+7
sdhci uses CONFIG_MMC_DEBUG for showing ADMA descriptor when occurring ADMA error. And it's also used to dump the registers whenever calling sdhci_add_host. On one hand, I don't see any burden to always print the state ADMA descriptor as it's rare and will help folks better understand what was happening when seeing ADMA error. On the other, folks may be interested in checking some registers at probe time. So we remove the sdhci_dumpregs from __sdhci_add_host and print some really useful registers in sdhci_setup_host. Suggested-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: wbsd: remove CONFIG_MMC_DEBUG from the driverShawn Lin1-2/+0
wbsd only use this to print some unsupported command. However the pr_warn should be enough for dynamic log control and CONFIG_MMC_DEBUG seems bogus here. Remove it. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: Kconfig: downgrade CONFIG_MMC_DEBUG for host drivers onlyShawn Lin3-9/+9
We have removed all code depending on CONFIG_MMC_DEBUG from mmc core now. So it's safe to make CONFIG_MMC_DEBUG just for host drivers only and we expect to kill this option in the future. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: core: turn the pr_info under CONFIG_MMC_DEBUG into pr_debugShawn Lin1-9/+4
There are lots of debug message in core.c which use pr_debug for better dynamic log level control. So it doesn't make sense for those print to still keep working only under CONFIG_MMC_DEBUG. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: core: always check the length of sglist with total data sizeShawn Lin1-6/+3
All the check within mmc_mrq_prep seems to be all-or-none proposition, so it doesn't make sense to only check the length of sglist only under the CONFIG_MMC_DEBUG context. I'd prefer to always keep the check there unconditionally. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: core: remove check of host->removed for rescan routineShawn Lin1-13/+0
The intention of this check was to prevent the conflict between hotplug and removing driver for whatever reason. Currently it doesn't improve anything and the following rescan process could still saftly perform the scan flow. So these code seems pointless now and let's remove them. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: sdhci-acpi: remove unused struct sdhci_host variableShawn Lin1-3/+0
It was never used and introduce a warning drivers/mmc/host/sdhci-acpi.c: In function 'sdhci_acpi_sdio_probe_slot': drivers/mmc/host/sdhci-acpi.c:297:21: warning: variable 'host' set but not used [-Wunused-but-set-variable] Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: sdhci-of-arasan: use io functions from sdhci.hJean-Francois Dagenais1-2/+2
This increases consistency of the code across the sdhci family. Signed-off-by: Jean-Francois Dagenais <jeff.dagenais@gmail.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com> Tested-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: atmel-mci: add missing of_node_putJulia Lawall1-0/+1
for_each_child_of_node performs an of_node_get on each iteration, so a break out the loop requires an of_node_put. The semantic patch that fixes this problem is as follows (http://coccinelle.lip6.fr): // <smpl> @@ local idexpression n; expression e,e1; iterator name for_each_child_of_node; @@ for_each_child_of_node(e1,n) { ... ( of_node_put(n); | e = n | + of_node_put(n); ? break; ) ... } ... when != n // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: sdhci-of-at91: set clocks and presets after resume from deepest PMQuentin Schulz1-2/+30
This adds deepest (Backup+Self-Refresh) PM support to the ATMEL SAMA5D2 SoC's SDHCI controller. When resuming from deepest state, it is required to restore preset registers as the registers are lost since VDD core has been shut down when entering deepest state on the SAMA5D2. The clocks need to be reconfigured as well. The other registers and init process are taken care of by the SDHCI core. Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: sdhci-of-at91: factor out clks and presets settingQuentin Schulz1-65/+82
The setting of clocks and presets is currently done in probe only but once deep PM support is added, it'll be needed in the resume function. Let's create a function for this setting. Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: atmel-mci: remove unused sg_len variableShawn Lin1-3/+2
We got a warning: drivers/mmc/host/atmel-mci.c:1086:15: warning: variable 'sg_len' set but not used [-Wunused-but-set-variable] Ideally we should check to see if sg_len is zero but looking into the code closely, I didn't find any possible to do that as atmci_start_request didn't even deploy any error handling for its host->prepare_data hook. So even we return error value for iflags like what other host drivers did, for instance, sdhci and dwmmc, it still need some extra work to improve the code. Just remove it to silent the warning, although it isn't perfect. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: sdhci-xenon: remove pointless struct xenon_priv *privShawn Lin1-2/+0
It was never used and leave a long standing compile warning: drivers/mmc/host/sdhci-xenon.c: In function 'xenon_probe': drivers/mmc/host/sdhci-xenon.c:447:21: warning: variable 'priv' set but not used [-Wunused-but-set-variable] Remove it to fix the warning. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: block: remove unused struct mmc_card *cardShawn Lin1-2/+0
It was never used and introduced a long standing compile warning: drivers/mmc/core/block.c: In function 'power_ro_lock_store': drivers/mmc/core/block.c:191:19: warning: variable 'card' set but not used [-Wunused-but-set-variable] Remove it to fix the warning. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: mxcmmc: check the return value of mxcmci_finish_dataShawn Lin1-0/+3
We got a compile warning for mxcmmc, drivers/mmc/host/mxcmmc.c: In function 'mxcmci_data_done': drivers/mmc/host/mxcmmc.c:661:6: warning: variable 'data_error' set but not used [-Wunused-but-set-variable] The easiest method is to remove the data_error. But looking into the code closely, I think we should check the return value of mxcmci_finish_data as if it got data->error(the same as data_error), we shouldn't try to read the response. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: mmc_ops: fix a typo for comment of mmc_start_bkopsShawn Lin1-1/+1
Just a trivial fix for that found by reading the code. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: mediatek: add ops->get_cd() supportChaotian Jing1-0/+1
if user plug out sd card slowly, finally card is plugged out but cat /proc/partitions can find that card is still exist in kernel. that's because alougth get card detect interrupt but CMD13 still can get correct response(all other pins are connected expect card detect pin). add ops->get_cd() can avoid this issue. Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: rtsx_usb_sdmmc: make array 'width' static constColin Ian King1-1/+1
array width is on-stack and not modified and should be made static const. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: renesas_sdhi_core: on R-Car 2+, make use of CBSY bitWolfram Sang1-5/+12
Most registers need to wait until the command is completed, not necessarily until the bus is free. At least, R-Car 2+ SoCs can signal that via the CBSY bit, so let's use it there instead of SCLKDIVEN to save a little bit of delay. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: tmio: don't wait on R-Car2+ when handling the clockWolfram Sang1-2/+8
Our hardware engineers confirmed that it is unnecessary to wait when turning the clock on/off. The documentation was a tad vague, so we used to play safe. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: tmio: no magic values when enabling DMAWolfram Sang2-1/+4
Use a proper define. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: tmio: add references to bit defines in the headerWolfram Sang1-0/+2
When defining bits, make sure we always have a reference to the register they belong to. For now, renaming all bits properly seems too intrusive, so at least make sure we have proper documentation. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: tmio: remove obsolete TMIO_BBSWolfram Sang1-2/+0
Since commit 10c7fcbd0f00a0 ("ARM: shmobile: sh7372: Remove ZBOOT MMC/SDHI support"), this define is not needed anymore. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-15 14:49:04 +0300