summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2013-01-25drm/exynos: Make 'drm_hdmi_get_edid' staticSachin Kamat1-1/+1
Fixes the following warning: drivers/gpu/drm/exynos/exynos_drm_hdmi.c:111:13: warning: symbol 'drm_hdmi_get_edid' was not declared. Should it be static? Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2013-01-25drm/exynos: fimd and ipp are broken on multiplatformArnd Bergmann1-2/+2
While the exynos DRM support in principle can work on multiplatform, the FIMD and IPP sections of it both include the plat/map-base.h header file, which is not available on multiplatform. Rather than disabling the entire driver, we can just conditionally build these two parts. Without this patch, building allyesconfig results in: drivers/gpu/drm/exynos/exynos_drm_fimc.c:19:27: fatal error: plat/map-base.h: No such file or directory drivers/gpu/drm/exynos/exynos_drm_ipp.c:20:27: fatal error: plat/map-base.h: No such file or directory Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2013-01-25drm/exynos: don't include plat/gpio-cfg.hArnd Bergmann1-1/+0
Patch 9eb3e9e6f3 "drm/exynos: add support for ARCH_MULTIPLATFORM" allowed building the exynos hdmi driver on non-samsung platforms, which unfortunately broke compilation in combination with 22c4f42897 "drm: exynos: hdmi: add support for exynos5 hdmi", which added an inclusion of the samsung-specific plat/gpio-cfg.h header file. Fortunately, that header file is not required any more here, so we can simply revert the inclusion in order to build the ARM allyesconfig again without getting this error: drivers/gpu/drm/exynos/exynos_hdmi.c:37:27: fatal error: plat/gpio-cfg.h: No such file or directory Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2013-01-25drm/exynos: Remove "internal" interrupt handlingSean Paul1-60/+14
Remove the "internal" interrupt handling since it's never invoked and remove "external" reference. This patch removes a bunch of dead code and clarifies how hotplugging is handled in the HDMI driver. Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2013-01-25drm/exynos: Add missing static specifiers in exynos_drm_rotator.cSachin Kamat1-2/+2
Fixes the following warnings: drivers/gpu/drm/exynos/exynos_drm_rotator.c:737:24: warning: symbol 'rot_limit_tbl' was not declared. Should it be static? drivers/gpu/drm/exynos/exynos_drm_rotator.c:754:27: warning: symbol 'rotator_driver_ids' was not declared. Should it be static? Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2013-01-25drm/exynos: Replace mdelay with usleep_rangeSean Paul2-8/+8
Replace the unnecessary atomic mdelay calls with usleep_range calls. Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2013-01-25drm/exynos: Make ipp_handle_cmd_work staticSachin Kamat1-1/+1
Fixes the following warning: drivers/gpu/drm/exynos/exynos_drm_ipp.c:872:6: warning: symbol 'ipp_handle_cmd_work' was not declared. Should it be static? Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2013-01-25drm/exynos: Make g2d_userptr_get_dma_addr staticSachin Kamat1-1/+1
Fixes the following warning: drivers/gpu/drm/exynos/exynos_drm_g2d.c:327:12: warning: symbol 'g2d_userptr_get_dma_addr' was not declared. Should it be static? Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2013-01-25drm/exynos: consider DMA_NONE flag to dmabuf importInki Dae1-14/+11
This patch considers DMA_NONE flag for other drivers not using dma mapping framework with iommu such as 3d gpu driver or others. For example, there might be 3d gpu driver that has its own iommu hw unit and iommu table mapping mechnism. So in this case, the dmabuf buffer imported into this driver needs just only sg table to map the buffer with its own iommu table itself. So this patch makes dma_buf_map_attachment ignore dma_map_sg call and just return sg table containing pages if dma_data_direction is DMA_NONE. Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2013-01-25drm/exynos: free sg object if dma_map_sg is failedInki Dae1-0/+1
This patch releases sgt's sg object allocated by sgt_alloc_table correctly. When exynos_gem_map_dma_buf was called by dma_buf_map_attachmemt(), the sgt's sg object was allocated by sg_alloc_tale() so if dma_map_sg() is failed, the sg object should be released. Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2013-01-25drm/exynos: added validation of edid for vidi connectionSeung-Woo Kim1-4/+3
If edid of vidi from user is invalid, size calculated from a number of cea extensions can be wrong. So, validation should be checked. Changelog v2: - just code cleanup . declare raw_edid only if vidi->connection is enabled. Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2013-01-25drm/exynos: let drm handle edid allocationsRahul Sharma6-48/+46
There's no need to allocate edid twice and do a memcpy when drm helpers exist to do just that. This patch cleans that interaction up, and doesn't keep the edid hanging around in the connector. v4: - removed error check for drm_mode_connector_update_edid_property which is expected to fail for Virtual Connectors like VIDI. Thanks to Seung-Woo Kim. v3: - removed MAX_EDID as it is not used anymore. v2: - changed vidi_get_edid callback inside vidi driver. Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com> Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2013-01-25Merge tag 'fixes-for-linus2' of ↵Linus Torvalds5-79/+69
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "Here's a long-pending fixes pull request for arm-soc (I didn't send one in the -rc4 cycle). The larger deltas are from: - A fixup of error paths in the mvsdio driver - Header file move for a driver that hadn't been properly converted to multiplatform on i.MX, which was causing build failures when included - Device tree updates for at91 dealing mostly with their new pinctrl setup merged in 3.8 and mistakes in those initial configs The rest are the normal mix of small fixes all over the place; sunxi, omap, imx, mvebu, etc, etc." * tag 'fixes-for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (40 commits) mfd: vexpress-sysreg: Don't skip initialization on probe ARM: vexpress: Enable A7 cores in V2P-CA15_A7's Device Tree ARM: vexpress: extend the MPIDR range used for pen release check ARM: at91/dts: correct comment in at91sam9x5.dtsi for mii ARM: at91/at91_dt_defconfig: add at91sam9n12 SoC to DT defconfig ARM: at91/at91_dt_defconfig: remove memory specification to cmdline ARM: at91/dts: add macb mii pinctrl config for kizbox ARM: at91: rm9200: remake the BGA as default version ARM: at91: fix gpios on i2c-gpio for RM9200 DT ARM: at91/at91sam9x5 DTS: add SCK USART pins ARM: at91/at91sam9x5 DTS: correct wrong PIO BANK values on u(s)arts ARM: at91/at91-pinctrl documentation: fix typo and add some details ARM: kirkwood: fix missing #interrupt-cells property mmc: mvsdio: use devm_ API to simplify/correct error paths. clk: mvebu/clk-cpu.c: fix memory leakage ARM: OMAP2+: omap4-panda: add UART2 muxing for WiLink shared transport ARM: OMAP2+: DT node Timer iteration fix ARM: OMAP2+: Fix section warning for omap_init_ocp2scp() ARM: OMAP2+: fix build break for omapdrm ARM: OMAP2: Fix missing omap2xxx_clkt_vps_late_init function calls ...
2013-01-24drm/radeon: Enable DMA_IB_SWAP_ENABLE on big endian hosts.Michel Dänzer2-4/+12
Fixes GPU hang during DMA ring IB test. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=59672 Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-01-24Merge tag 'pm+acpi-for-3.8-rc5' of ↵Linus Torvalds10-30/+103
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management fixes from Rafael Wysocki: - Two cpuidle initialization fixes from Konrad Rzeszutek Wilk. - cpufreq regression fixes for AMD processors from Borislav Petkov, Stefan Bader, and Matthew Garrett. - ACPI cpufreq fix from Thomas Schlichter. - cpufreq and devfreq fixes related to incorrect usage of operating performance points (OPP) framework and RCU from Nishanth Menon. - APEI workaround for incorrect BIOS information from Lans Zhang. * tag 'pm+acpi-for-3.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: Add module aliases for acpi-cpufreq ACPI: Check MSR valid bit before using P-state frequencies PM / devfreq: exynos4_bus: honor RCU lock usage PM / devfreq: add locking documentation for recommended_opp cpufreq: cpufreq-cpu0: use RCU locks around usage of OPP cpufreq: OMAP: use RCU locks around usage of OPP ACPI, APEI: Fixup incorrect 64-bit access width firmware bug ACPI / processor: Get power info before updating the C-states powernow-k8: Add a kconfig dependency on acpi-cpufreq ACPI / cpuidle: Fix NULL pointer issues when cpuidle is disabled intel_idle: Don't register CPU notifier if we are not running.
2013-01-24Merge tag 'regmap-fix-3.8-rc4' of ↵Linus Torvalds2-3/+1
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap Pull regmap fixes from Mark Brown: "One more oversight in the debugfs code was reported and fixed, plus a documentation fix." * tag 'regmap-fix-3.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: fix small typo in regmap_bulk_write comment regmap: debugfs: Fix seeking from the cache
2013-01-24Merge branch 'fixes' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds3-6/+9
Pull slave-dmaengine fixes from Vinod Koul: "A few fixes on slave dmanengine. There are trivial fixes in imx-dma, tegra-dma & ioat driver" * 'fixes' of git://git.infradead.org/users/vkoul/slave-dma: dma: tegra: implement flags parameters for cyclic transfer dmaengine: imx-dma: Disable use of hw_chain to fix sg_dma transfers. ioat: Fix DMA memory sync direction correct flag
2013-01-24Merge branch 'i2c-embedded/for-current' of ↵Linus Torvalds5-6/+16
git://git.pengutronix.de/git/wsa/linux Pill i2c fixes from Wolfram Sang: "Here are a few, typical driver fixes for the I2C subsystem" * 'i2c-embedded/for-current' of git://git.pengutronix.de/git/wsa/linux: i2c-designware: add missing MODULE_LICENSE i2c: omap: fix draining irq handling i2c: omap: errata i462: fix incorrect ack for arbitration lost interrupt i2c: muxes: fix wrong use of sizeof(ptr) i2c: sirf: register i2c_client from dt child-nodes in probe entry i2c: mxs: Fix type of error code i2c: mxs: Fix misuse init_completion
2013-01-24Merge branch 'vexpress/fixes' of git://git.linaro.org/people/pawelmoll/linux ↵Olof Johansson1-12/+20
into fixes From Pawel Moll: - makes the V2P-CA15_A7 (a.k.a. TC2) work with 3.8 kernels - improves vexpress-sysreg.c behaviour on arm64 platforms * 'vexpress/fixes' of git://git.linaro.org/people/pawelmoll/linux: mfd: vexpress-sysreg: Don't skip initialization on probe ARM: vexpress: Enable A7 cores in V2P-CA15_A7's Device Tree ARM: vexpress: extend the MPIDR range used for pen release check
2013-01-24mfd: vexpress-sysreg: Don't skip initialization on probePawel Moll1-12/+20
The vexpress-sysreg driver does not have to be initialized early, when the platform doesn't require this. Unfortunately in such case it wasn't initialized correctly - master site lookup and config bridge registration were missing. Fixed now. Signed-off-by: Pawel Moll <pawel.moll@arm.com>
2013-01-24Merge remote-tracking branch 'regmap/fix/debugfs' into tmpMark Brown1-2/+0
2013-01-24Merge tag 'imx-fixes-3.8-3' of ↵Olof Johansson1-0/+10
git://git.linaro.org/people/shawnguo/linux-2.6 into fixes From Shawn Guo: This is yet another critical imxfb fixes held off by absence of FB maintainer for some time. * tag 'imx-fixes-3.8-3' of git://git.linaro.org/people/shawnguo/linux-2.6: video: imxfb: Do not crash on reboot
2013-01-24Merge tag 'mvebu_fixes_for_v3.8-rc5' of ↵Olof Johansson2-65/+36
git://git.infradead.org/users/jcooper/linux into fixes From Jason Cooper: mvebu fixes for v3.8-rc5 - fix memory leak in mvebu/clk-cpu.c - use devm_ to correct/simplify error paths in mvsdio - add missing #interrupt-cells property in kirkwood * tag 'mvebu_fixes_for_v3.8-rc5' of git://git.infradead.org/users/jcooper/linux: ARM: kirkwood: fix missing #interrupt-cells property mmc: mvsdio: use devm_ API to simplify/correct error paths. clk: mvebu/clk-cpu.c: fix memory leakage
2013-01-24Merge tag 'usb-3.8-rc4' of ↵Linus Torvalds12-125/+130
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull more USB fixes from Greg Kroah-Hartman: "Here are some more USB fixes for the 3.8-rc4 tree. Some gadget driver fixes, and finally resolved the ehci-mxc driver build issues (it's just some code moving around and being deleted)." * tag 'usb-3.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: USB: EHCI: fix build error in ehci-mxc USB: EHCI: add a name for the platform-private field USB: EHCI: fix incorrect configuration test USB: EHCI: Move definition of EHCI_STATS to ehci.h USB: UHCI: fix IRQ race during initialization usb: gadget: FunctionFS: Fix missing braces in parse_opts usb: dwc3: gadget: fix ep->maxburst for ep0 ARM: i.MX clock: Change the connection-id for fsl-usb2-udc usb: gadget: fsl_mxc_udc: replace MX35_IO_ADDRESS to ioremap usb: gadget: fsl-mxc-udc: replace cpu_is_xxx() with platform_device_id usb: musb: cppi_dma: drop '__init' annotation
2013-01-24Merge tag 'char-misc-3.8-rc4' of ↵Linus Torvalds1-1/+36
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull drivers/misc fix from Greg Kroah-Hartman: "Here is a single revert for the ti-st misc driver, fixing problem that was introduced in 3.7-rc1 that has been bothering people." * tag 'char-misc-3.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: Revert "drivers/misc/ti-st: remove gpio handling"
2013-01-24Merge branch 'v4l_for_linus' of ↵Linus Torvalds10-67/+57
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: - gspca: add needed delay for I2C traffic for sonixb/sonixj cameras - gspca: add one missing Kinect USB ID - usbvideo: some regression fixes - omap3isp: fix some build issues - videobuf2: fix video output handling - exynos s5p/m5mols: a few regression fixes. * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] uvcvideo: Set error_idx properly for S_EXT_CTRLS failures [media] uvcvideo: Cleanup leftovers of partial revert [media] uvcvideo: Return -EACCES when trying to set a read-only control [media] omap3isp: Don't include <plat/cpu.h> [media] s5p-mfc: Fix interrupt error handling routine [media] s5p-fimc: Fix return value of __fimc_md_create_flite_source_links() [media] m5mols: Fix typo in get_fmt callback [media] v4l: vb2: Set data_offset to 0 for single-plane output buffers [media] [FOR,v3.8] omap3isp: Don't include deleted OMAP plat/ header files [media] gspca_sonixj: Add a small delay after i2c_w1 [media] gspca_sonixb: Properly wait between i2c writes [media] gspca_kinect: add Kinect for Windows USB id
2013-01-24DM-RAID: Fix RAID10's check for sufficient redundancyJonathan Brassow1-64/+37
Before attempting to activate a RAID array, it is checked for sufficient redundancy. That is, we make sure that there are not too many failed devices - or devices specified for rebuild - to undermine our ability to activate the array. The current code performs this check twice - once to ensure there were not too many devices specified for rebuild by the user ('validate_rebuild_devices') and again after possibly experiencing a failure to read the superblock ('analyse_superblocks'). Neither of these checks are sufficient. The first check is done properly but with insufficient information about the possible failure state of the devices to make a good determination if the array can be activated. The second check is simply done wrong in the case of RAID10 because it doesn't account for the independence of the stripes (i.e. mirror sets). The solution is to use the properly written check ('validate_rebuild_devices'), but perform the check after the superblocks have been read and we know which devices have failed. This gives us one check instead of two and performs it in a location where it can be done right. Only RAID10 was affected and it was affected in the following ways: - the code did not properly catch the condition where a user specified a device for rebuild that already had a failed device in the same mirror set. (This condition would, however, be caught at a deeper level in MD.) - the code triggers a false positive and denies activation when devices in independent mirror sets have failed - counting the failures as though they were all in the same set. The most likely place this error was introduced (or this patch should have been included) is in commit 4ec1e369 - first introduced in v3.7-rc1. Consequently this fix should also go in v3.7.y, however there is a small conflict on the .version in raid_target, so I'll submit a separate patch to -stable. Cc: stable@vger.kernel.org Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: NeilBrown <neilb@suse.de>
2013-01-23drm/radeon: fix a rare case of double kfreeIlija Hadzic1-0/+2
If one (but not both) allocations of p->chunks[].kpage[] in radeon_cs_parser_init fail, the error path will free the successfully allocated page, but leave a stale pointer value in the kpage[] field. This will later cause a double-free when radeon_cs_parser_fini is called. This patch fixes the issue by forcing both pointers to NULL after kfree in the error path. The circumstances under which the problem happens are very rare. The card must be AGP and the system must run out of kmalloc area just at the right time so that one allocation succeeds, while the other fails. Signed-off-by: Ilija Hadzic <ihadzic@research.bell-labs.com> Cc: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2013-01-23Merge branch 'master' of ↵John W. Linville8-44/+32
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2013-01-23USB: EHCI: fix build error in ehci-mxcAlan Stern4-76/+53
This patch (as1643b) fixes a build error in ehci-hcd when compiling for ARM with allmodconfig: drivers/usb/host/ehci-hcd.c:1285:0: warning: "PLATFORM_DRIVER" redefined [enabled by default] drivers/usb/host/ehci-hcd.c:1255:0: note: this is the location of the previous definition drivers/usb/host/ehci-mxc.c:280:31: warning: 'ehci_mxc_driver' defined but not used [-Wunused-variable] drivers/usb/host/ehci-hcd.c:1285:0: warning: "PLATFORM_DRIVER" redefined [enabled by default] drivers/usb/host/ehci-hcd.c:1255:0: note: this is the location of the previous definition The fix is to convert ehci-mxc over to the new "ehci-hcd is a library" scheme so that it can coexist peacefully with the ehci-platform driver. As part of the conversion the ehci_mxc_priv data structure, which was allocated dynamically, is now placed where it belongs: in the private area at the end of struct ehci_hcd. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-23r8169: remove the obsolete and incorrect AMD workaroundTimo Teräs1-7/+0
This was introduced in commit 6dccd16 "r8169: merge with version 6.001.00 of Realtek's r8169 driver". I did not find the version 6.001.00 online, but in 6.002.00 or any later r8169 from Realtek this hunk is no longer present. Also commit 05af214 "r8169: fix Ethernet Hangup for RTL8110SC rev d" claims to have fixed this issue otherwise. The magic compare mask of 0xfffe000 is dubious as it masks parts of the Reserved part, and parts of the VLAN tag. But this does not make much sense as the VLAN tag parts are perfectly valid there. In matter of fact this seems to be triggered with any VLAN tagged packet as RxVlanTag bit is matched. I would suspect 0xfffe0000 was intended to test reserved part only. Finally, this hunk is evil as it can cause more packets to be handled than what was NAPI quota causing net/core/dev.c: net_rx_action(): WARN_ON_ONCE(work > weight) to trigger, and mess up the NAPI state causing device to hang. As result, any system using VLANs and having high receive traffic (so that NAPI poll budget limits rtl_rx) would result in device hang. Signed-off-by: Timo Teräs <timo.teras@iki.fi> Acked-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-23radeon_display: Use pointer return error codesxueminsu1-1/+1
drm_mode_addfb() expects fb_create return error code instead of NULL. Signed-off-by: xueminsu <xuemin.su@intel.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2013-01-23drm/radeon: fix cursor corruption on DCE6 and newerJerome Glisse1-1/+2
Aruba and newer gpu does not need the avivo cursor work around, quite the opposite this work around lead to corruption. agd5f: check DCE6 rather than ARUBA since the issue is DCE version specific rather than family specific. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2013-01-23tuntap: limit the number of flow cachesJason Wang1-1/+6
We create new flow caches when a new flow is identified by tuntap, This may lead some issues: - userspace may produce a huge amount of short live flows to exhaust host memory - the unlimited number of flow caches may produce a long list which increase the time in the linear searching Solve this by introducing a limit of total number of flow caches. Cc: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-23tuntap: reduce memory using of queuesJason Wang1-7/+8
A MAX_TAP_QUEUES(1024) queues of tuntap device is always allocated unconditionally even userspace only requires a single queue device. This is unnecessary and will lead a very high order of page allocation when has a high possibility to fail. Solving this by creating a one queue net device when userspace only use one queue and also reduce MAX_TAP_QUEUES to DEFAULT_MAX_NUM_RSS_QUEUES which can guarantee the success of the allocation. Reported-by: Dirk Hohndel <dirk@hohndel.org> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-23net: cdc_mbim: send ZLP only for the specific buggy deviceBjørn Mork1-0/+19
Reverting 328d7b8 and instead adding an exception for the Sierra Wireless MC7710. commit 328d7b8 (net: cdc_mbim: send ZLP after max sized NTBs) added a workaround for an issue observed on one specific device. Concerns were raised that this workaround adds a performance penalty to all devices based on questionable, if not buggy, behaviour of a single device: "If you add ZLP for NTBs of dwNtbOutMaxSize, you are heavily affecting CPU load, increasing interrupt load by factor of 2 in high load traffic scenario and possibly decreasing throughput for all other devices which behaves correctly." "The idea of NCM was to avoid extra ZLPs. If your transfer is exactly dwNtbOutMaxSize, it's known, you can submit such request on the receiver side and you do not need any EOT indicatation, so the frametime can be used for useful data." Adding a device specific exception to prevent the workaround from affecting well behaved devices. The assumption here is that needing a ZLP is truly an *exception*. We do not yet have enough data to verify this. The generic workaround in commit 328d7b8 should be considered acceptable despite the performance penalty if the exception list becomes a maintainance hassle. Cc: Alexey ORISHKO <alexey.orishko@stericsson.com> Cc: Yauheni Kaliuta <y.kaliuta@gmail.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-23drm/i915: dump UTS_RELEASE into the error_stateDaniel Vetter1-0/+2
Useful for statistics or on overflowing bug reports to keep things all lined up. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-01-23Revert "drivers/misc/ti-st: remove gpio handling"Luciano Coelho1-1/+36
This reverts commit eccf2979b2c034b516e01b8a104c3739f7ef07d1. The reason is that it broke TI WiLink shared transport on Panda. Also, callback functions should not be added to board files anymore, so revert to implementing the power functions in the driver itself. Additionally, changed a variable name ('status' to 'err') so that this revert compiles properly. Cc: stable <stable@vger.kernel.org> [3.7] Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Luciano Coelho <coelho@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-23mmc: mvsdio: use devm_ API to simplify/correct error paths.Andrew Lunn1-62/+30
There are a number of bugs in the error paths of this driver. Make use of devm_ functions to simplify the cleanup on error. Based on a patch by Russell King. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-01-23clk: mvebu/clk-cpu.c: fix memory leakageCong Ding1-3/+6
the variable cpuclk and clk_name should be properly freed when error happens. Signed-off-by: Cong Ding <dinggnu@gmail.com> Acked-by: Jason Cooper <jason@lakedaemon.net> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-01-23Merge tag '3.8-pci-fixes-2' of ↵Linus Torvalds10-43/+40
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "The most important is a fix for a pciehp deadlock that occurs when unplugging a Thunderbolt adapter. We also applied the same fix to shpchp, removed CONFIG_EXPERIMENTAL dependencies, fixed a pcie_aspm=force problem, and fixed a refcount leak. Details: - Hotplug PCI: pciehp: Use per-slot workqueues to avoid deadlock PCI: shpchp: Make shpchp_wq non-ordered PCI: shpchp: Handle push button event asynchronously PCI: shpchp: Use per-slot workqueues to avoid deadlock - Power management PCI: Allow pcie_aspm=force even when FADT indicates it is unsupported - Misc PCI/AER: pci_get_domain_bus_and_slot() call missing required pci_dev_put() PCI: remove depends on CONFIG_EXPERIMENTAL" * tag '3.8-pci-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: remove depends on CONFIG_EXPERIMENTAL PCI: Allow pcie_aspm=force even when FADT indicates it is unsupported PCI: shpchp: Use per-slot workqueues to avoid deadlock PCI: shpchp: Handle push button event asynchronously PCI: shpchp: Make shpchp_wq non-ordered PCI/AER: pci_get_domain_bus_and_slot() call missing required pci_dev_put() PCI: pciehp: Use per-slot workqueues to avoid deadlock
2013-01-23iommu/intel: disable DMAR for g4x integrated gfxDaniel Vetter1-6/+15
DMAR support on g4x/gm45 integrated gpus seems to be totally busted. So don't bother, but instead disable it by default to allow distros to unconditionally enable DMAR support. v2: Actually wire up the right quirk entry, spotted by Adam Jackson. Note that according to intel marketing materials only g45 and gm45 support DMAR/VT-d. So we have reports for all relevant gen4 pci ids by now. Still, keep all the other gen4 ids in the quirk table in case the marketing stuff confused me again, which would not be the first time. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=51921 Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=538163 Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=538163 Cc: Adam Jackson <ajax@redhat.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: stable@vger.kernel.org Acked-By: David Woodhouse <David.Woodhouse@intel.com> Tested-by: stathis <stathis@npcglib.org> Tested-by: Mihai Moldovan <ionic@ionic.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-01-23drm/i915: GFX_MODE Flush TLB Invalidate Mode must be '1' for scanline waitsChris Wilson1-0/+5
On SNB, if bit 13 of GFX_MODE, Flush TLB Invalidate Mode, is not set to 1, the hardware can not program the scanline values. Those scanline values then control when the signal is sent from the display engine to the render ring for MI_WAIT_FOR_EVENTs. Note setting this bit means that TLB invalidations must be performed explicitly through the appropriate bits being set in PIPE_CONTROL. References: https://bugzilla.kernel.org/show_bug.cgi?id=52311 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@vger.kernel.org Reviewed-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-01-23drm/i915: Disable AsyncFlip performance optimisationsChris Wilson2-6/+14
This is a required workarounds for all products, especially on gen6+ where it causes the command streamer to fail to parse instructions following a WAIT_FOR_EVENT. We use WAIT_FOR_EVENT for synchronising between the GPU and the display engines, and so this bit being unset may cause hangs. References: https://bugzilla.kernel.org/show_bug.cgi?id=52311 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@vger.kernel.org Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-01-23cpufreq: Add module aliases for acpi-cpufreqMatthew Garrett1-0/+7
The acpi core will call request_module("acpi-cpufreq") on subsystem init, but this will fail if the module isn't available at that stage of boot. Add some module aliases to ensure that udev can load the module on Intel and AMD systems with the appropriate feature bits - I /think/ that this will also work on VIA systems, but haven't verified that. References: http://lkml.kernel.org/r/1448223.sdUJnNSRz4@vostro.rjw.lan Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com> Tested-by: Leonid Isaev <lisaev@umail.iu.edu> Acked-by: Borislav Petkov <bp@suse.de> Cc: 3.7+ <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-01-22Merge tag 'fixes-for-v3.8-rc4' of ↵Linus Torvalds2-13/+7
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fixes from Linus Walleij: "Here are some GPIO fixes I stacked up in my GPIO tree: - Remove a bad #include from the Samsung driver - Some Kconfig hazzle for the Samsungs - Skip gpiolib registration on EXYNOS5440 - Don't free the MVEBU label" * tag 'fixes-for-v3.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: mvebu: Don't free chip label memory gpio: samsung: skip gpio lib registration for EXYNOS5440 gpio: samsung: silent build warning for EXYNOS5 SoCs gpio: samsung: fix pinctrl condition for exynos and exynos5440 gpio: samsung: remove inclusion <mach/regs-clock.h>
2013-01-22mwifiex: fix typo in PCIe adapter NULL checkAvinash Patil1-1/+1
Add missing "!" as we are supposed to check "!card->adapter" in PCIe suspend handler. Cc: "3.2+" <stable@vger.kernel.org> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Reviewed-by: Sergey V. <sftp.mtuci@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-22ath9k: allow setting arbitrary antenna masks on AR9003+Felix Fietkau1-0/+3
Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-22ath9k_hw: fix chain swap setting when setting rx chainmask to 5Felix Fietkau1-19/+6
Chain swapping should only be enabled when the EEPROM chainmask is set to 5, regardless of what the runtime chainmask is. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-22ath9k_hw: fix calibration issues on chainmask that don't include chain 0Felix Fietkau3-1/+4
Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-02-23 19:13:44 +0300