summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2011-01-19Merge branch 'hwmon-for-linus' of ↵Linus Torvalds2-4/+21
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging: hwmon: (lm93) Add support for LM94
2011-01-19Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linusLinus Torvalds3-0/+301
* 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus: (26 commits) MIPS: Malta: enable Cirrus FB console MIPS: add CONFIG_VIRTUALIZATION for virtio support MIPS: Implement __read_mostly MIPS: ath79: add common WMAC device for AR913X based boards MIPS: ath79: Add initial support for the Atheros AP81 reference board MIPS: ath79: add common SPI controller device SPI: Add SPI controller driver for the Atheros AR71XX/AR724X/AR913X SoCs MIPS: ath79: add common GPIO buttons device MIPS: ath79: add common watchdog device MIPS: ath79: add common GPIO LEDs device MIPS: ath79: add initial support for the Atheros PB44 reference board MIPS: ath79: utilize the MIPS multi-machine support MIPS: ath79: add GPIOLIB support MIPS: Add initial support for the Atheros AR71XX/AR724X/AR931X SoCs MIPS: jump label: Add MIPS support. MIPS: Use WARN() in uasm for better diagnostics. MIPS: Optimize TLB handlers for Octeon CPUs MIPS: Add LDX and LWX instructions to uasm. MIPS: Use BBIT instructions in TLB handlers MIPS: Declare uasm bbit0 and bbit1 functions. ...
2011-01-18hwmon: (lm93) Add support for LM94Guenter Roeck2-4/+21
This patch adds basic support for LM94 to the LM93 driver. LM94 specific sensors and features are not supported. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Acked-by: Jean Delvare <khali@linux-fr.org>
2011-01-18SPI: Add SPI controller driver for the Atheros AR71XX/AR724X/AR913X SoCsGabor Juhos3-0/+301
The Atheros AR71XX/AR724X/AR913X SoCs have a built-in SPI controller. This patch implements a driver for that. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: spi-devel-general@lists.sourceforge.net Acked-by: Grant Likely <grant.likely@secretlab.ca> Cc: linux-mips@linux-mips.org Cc: Imre Kaloz <kaloz@openwrt.org> Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Cc: Cliff Holden <Cliff.Holden@Atheros.com> Cc: Kathy Giori <Kathy.Giori@Atheros.com> Patchwork: https://patchwork.linux-mips.org/patch/1960/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-18staging: fix build failure in bcm driverAndres Salomon2-7/+6
While building latest Linus git, I hit the following: CC [M] drivers/staging/bcm/Qos.o drivers/staging/bcm/Qos.c: In function ‘PruneQueue’: drivers/staging/bcm/Qos.c:367: error: ‘struct netdev_queue’ has no member named ‘tx_dropped’ drivers/staging/bcm/Qos.c: In function ‘flush_all_queues’: drivers/staging/bcm/Qos.c:416: error: ‘struct netdev_queue’ has no member named ‘tx_dropped’ make[5]: *** [drivers/staging/bcm/Qos.o] Error 1 make[4]: *** [drivers/staging/bcm] Error 2 make[3]: *** [drivers/staging] Error 2 As well as: CC [M] drivers/staging/bcm/Transmit.o drivers/staging/bcm/Transmit.c: In function ‘SetupNextSend’: drivers/staging/bcm/Transmit.c:163: error: ‘struct netdev_queue’ has no member named ‘tx_bytes’ drivers/staging/bcm/Transmit.c:164: error: ‘struct netdev_queue’ has no member named ‘tx_packets’ make[2]: *** [drivers/staging/bcm/Transmit.o] Error 1 tx_dropped/tx_bytes_tx_packets were removed in commit 1ac9ad13. This patch converts bcm to use net_device_stats instead of netdev_queue. Acked-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Andres Salomon <dilinger@queued.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-18Merge branch 'for-linus' of ↵Linus Torvalds35-137/+339
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: RDMA: Update workqueue usage RDMA/nes: Fix incorrect SFP+ link status detection on driver init RDMA/nes: Fix SFP+ link down detection issue with switch port disable RDMA/nes: Generate IB_EVENT_PORT_ERR/PORT_ACTIVE events RDMA/nes: Fix bonding on iw_nes IB/srp: Test only once whether iu allocation succeeded IB/mlx4: Handle protocol field in multicast table RDMA: Use vzalloc() to replace vmalloc()+memset(0) mlx4_{core, ib, en}: Fix driver when sizeof (phys_addr_t) > sizeof (long) IB/mthca: Fix driver when sizeof (phys_addr_t) > sizeof (long)
2011-01-17Merge branch 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds2-8/+2
* 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6: spi/spi_sh_msiof: fix a wrong free_irq() parameter dt/flattree: Return virtual address from early_init_dt_alloc_memory_arch()
2011-01-17Merge git://git.infradead.org/mtd-2.6Linus Torvalds39-316/+535
* git://git.infradead.org/mtd-2.6: (59 commits) mtd: mtdpart: disallow reading OOB past the end of the partition mtd: pxa3xx_nand: NULL dereference in pxa3xx_nand_probe UBI: use mtd->writebufsize to set minimal I/O unit size mtd: initialize writebufsize in the MTD object of a partition mtd: onenand: add mtd->writebufsize initialization mtd: nand: add mtd->writebufsize initialization mtd: cfi: add writebufsize initialization mtd: add writebufsize field to mtd_info struct mtd: OneNAND: OMAP2/3: prevent regulator sleeping while OneNAND is in use mtd: OneNAND: add enable / disable methods to onenand_chip mtd: m25p80: Fix JEDEC ID for AT26DF321 mtd: txx9ndfmc: limit transfer bytes to 512 (ECC provides 6 bytes max) mtd: cfi_cmdset_0002: add support for Samsung K8D3x16UxC NOR chips mtd: cfi_cmdset_0002: add support for Samsung K8D6x16UxM NOR chips mtd: nand: ams-delta: drop omap_read/write, use ioremap mtd: m25p80: add debugging trace in sst_write mtd: nand: ams-delta: select for built-in by default mtd: OneNAND: lighten scary initial bad block messages mtd: OneNAND: OMAP2/3: add support for command line partitioning mtd: nand: rearrange ONFI revision checking, add ONFI 2.3 ... Fix up trivial conflict in drivers/mtd/Kconfig as per DavidW.
2011-01-17Merge branch 'for-linus' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: fs: fix address space warnings in ioctl_fiemap() aio: check return value of create_workqueue() hpfs_setattr error case avoids unlock_kernel compat: copy missing fields in compat_statfs64 to user compat: update comment of compat statfs syscalls compat: remove unnecessary assignment in compat_rw_copy_check_uvector() fs: FS_POSIX_ACL does not depend on BLOCK fs: Remove unlikely() from fget_light() fs: Remove unlikely() from fput_light() fallocate should be a file operation make the feature checks in ->fallocate future proof staging: smbfs building fix tidy up around finish_automount() don't drop newmnt on error in do_add_mount() Take the completion of automount into new helper
2011-01-17Merge branch 'drm-fixes' of ↵Linus Torvalds20-262/+124
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/radeon/kms: balance asic_reset functions drm/radeon/kms: remove duplicate card_posted() functions drm/radeon/kms: add module option for pcie gen2 drm/radeon/kms: fix typo in evergreen safe reg drm/nouveau: fix gpu page faults triggered by plymouthd drm/nouveau: greatly simplify mm, killing some bugs in the process drm/nvc0: enable protection of system-use-only structures in vm drm/nv40: initialise 0x17xx on all chipsets that have it drm/nv40: make detection of 0x4097-ful chipsets available everywhere
2011-01-17Merge branch 'next' of ↵Linus Torvalds10-794/+935
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: (63 commits) ARM: PL08x: cleanup comments Update CONFIG_MD_RAID6_PQ to CONFIG_RAID6_PQ in drivers/dma/iop-adma.c ARM: PL08x: fix a warning Fix dmaengine_submit() return type dmaengine: at_hdmac: fix race while monitoring channel status dmaengine: at_hdmac: flags located in first descriptor dmaengine: at_hdmac: use subsys_initcall instead of module_init dmaengine: at_hdmac: no need set ACK in new descriptor dmaengine: at_hdmac: trivial add precision to unmapping comment dmaengine: at_hdmac: use dma_address to program DMA hardware pch_dma: support new device ML7213 IOH ARM: PL08x: prevent dma_set_runtime_config() reconfiguring memcpy channels ARM: PL08x: allow dma_set_runtime_config() to return errors ARM: PL08x: fix locking between prepare function and submit function ARM: PL08x: introduce 'phychan_hold' to hold on to physical channels ARM: PL08x: put txd's on the pending list in pl08x_tx_submit() ARM: PL08x: rename 'desc_list' as 'pend_list' ARM: PL08x: implement unmapping of memcpy buffers ARM: PL08x: store prep_* flags in async_tx structure ARM: PL08x: shrink srcbus/dstbus in txd structure ...
2011-01-17spi/spi_sh_msiof: fix a wrong free_irq() parameterGuennadi Liakhovetski1-1/+1
Without this fix reloading of the driver is impossible. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-01-17mtd: mtdpart: disallow reading OOB past the end of the partitionArtem Bityutskiy1-1/+18
This patch fixes the mtdpart bug which allows users reading OOB past the end of the partition. This happens because 'part_read_oob()' allows reading multiple OOB areas in one go, and mtdparts does not validate the OOB length in the request. Although there is such check in 'nand_do_read_oob()' in nand_base.c, but it checks that we do not read past the flash chip, not the partition, because in nand_base.c we work with the whole chip (e.g., mtd->size in nand_base.c is the size of the whole chip). So this check cannot be done correctly in nand_base.c and should be instead done in mtdparts.c. This problem was reported by Jason Liu <r64343@freescale.com> and reproduced with nandsim: $ modprobe nandsim first_id_byte=0x20 second_id_byte=0xaa third_id_byte=0x00 \ fourth_id_byte=0x15 parts=0x400,0x400 $ modprobe nandsim mtd_oobtest.ko dev=0 $ dmesg = snip = mtd_oobtest: attempting to read past end of device mtd_oobtest: an error is expected... mtd_oobtest: error: read past end of device = snip = mtd_oobtest: finished with 2 errors Reported-by: Jason Liu <liu.h.jason@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-01-17staging: smbfs building fixYang Ruirui1-2/+2
Building error for smbfs: drivers/staging/smbfs/dir.c:286: error: static declaration of 'smbfs_dentry_operations' follows non-static declaration drivers/staging/smbfs/proto.h:42: error: previous declaration of 'smbfs_dentry_operations' was here drivers/staging/smbfs/dir.c:294: error: static declaration of 'smbfs_dentry_operations_case' follows non-static declaration drivers/staging/smbfs/proto.h:41: error: previous declaration of 'smbfs_dentry_operations_case' was here make[3]: *** [drivers/staging/smbfs/dir.o] Error 1 make[2]: *** [drivers/staging/smbfs] Error 2 make[1]: *** [drivers/staging] Error 2 make[1]: *** Waiting for unfinished jobs.... Fix it by removing static keywords Signed-off-by: Yang Ruirui <ruirui.r.yang@tieto.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-01-17Merge branches 'misc', 'mlx4', 'mthca', 'nes' and 'srp' into for-nextRoland Dreier18-53/+288
2011-01-17RDMA: Update workqueue usageTejun Heo12-50/+36
* ib_wq is added, which is used as the common workqueue for infiniband instead of the system workqueue. All system workqueue usages including flush_scheduled_work() callers are converted to use and flush ib_wq. * cancel_delayed_work() + flush_scheduled_work() converted to cancel_delayed_work_sync(). * qib_wq is removed and ib_wq is used instead. This is to prepare for deprecation of flush_scheduled_work(). Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-17drm/radeon/kms: balance asic_reset functionsAlex Deucher3-18/+20
First, we were calling mc_stop() at the top of the function which turns off all MC (memory controller) clients, then checking if the GPU is idle. If it was idle we returned without re-enabling the MC clients which would lead to a blank screen, etc. This patch checks if the GPU is idle before calling mc_stop(). Second, if the reset failed, we were returning without re-enabling the MC clients. This patch re-enables the MC clients before returning regardless of whether the reset was successful or not. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-17drm/radeon/kms: remove duplicate card_posted() functionsAlex Deucher3-46/+3
Use the common one for all asics. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-17drm/radeon/kms: add module option for pcie gen2Alex Deucher5-0/+14
Switching to pcie gen2 causes problems on some boards. Add a module option to turn it on/off. There are gen2 compatability issues with some motherboards it seems. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=33027 Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-17drm/radeon/kms: fix typo in evergreen safe regAlex Deucher1-1/+1
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-17Merge remote branch 'nouveau/drm-nouveau-next' of /ssd/git/drm-nouveau-next ↵Dave Airlie11-197/+86
into drm-fixes * 'nouveau/drm-nouveau-next' of /ssd/git/drm-nouveau-next: drm/nouveau: fix gpu page faults triggered by plymouthd drm/nouveau: greatly simplify mm, killing some bugs in the process drm/nvc0: enable protection of system-use-only structures in vm drm/nv40: initialise 0x17xx on all chipsets that have it drm/nv40: make detection of 0x4097-ful chipsets available everywhere
2011-01-17drm/nouveau: fix gpu page faults triggered by plymouthdBen Skeggs1-2/+2
The switch to separate BAR and channel address spaces made the fbcon memory address calculation incorrect on NV50+ boards, this commit fixes that. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-01-17drm/nouveau: greatly simplify mm, killing some bugs in the processBen Skeggs3-160/+52
Reviewed-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-01-17drm/nvc0: enable protection of system-use-only structures in vmBen Skeggs4-5/+10
Somehow missed this in the original merge of the nvc0 code. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-01-17drm/nv40: initialise 0x17xx on all chipsets that have itBen Skeggs1-12/+2
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-01-17drm/nv40: make detection of 0x4097-ful chipsets available everywhereBen Skeggs3-18/+20
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-01-17drivers/nfc/pn544.c: fix min_t warningsAndrew Morton1-1/+1
Fix these: drivers/nfc/pn544.c: In function 'pn544_read': drivers/nfc/pn544.c:356: warning: comparison of distinct pointer types lacks a cast drivers/nfc/pn544.c:377: warning: comparison of distinct pointer types lacks a cast drivers/nfc/pn544.c: In function 'pn544_write': drivers/nfc/pn544.c:463: warning: comparison of distinct pointer types lacks a cast drivers/nfc/pn544.c:485: warning: comparison of distinct pointer types lacks a cast Cc: "Matti J. Aaltonen" <matti.j.aaltonen@nokia.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-17ARM: PL08x: cleanup commentsRussell King - ARM Linux1-94/+52
Cleanup the formatting of comments, remove some which don't make sense anymore. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> [fix conflict with 96a608a4] Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-17Merge branch 'for-linus' of ↵Linus Torvalds1-2/+1
git://git.kernel.org/pub/scm/linux/kernel/git/nab/scsi-post-merge-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/scsi-post-merge-2.6: ocfs2: Make OCFS2_FS depend on CONFIGFS_FS dlm: Make DLM depend on CONFIGFS_FS net: Make NETCONSOLE_DYNAMIC depend on CONFIGFS_FS configfs: change depends -> select SYSFS [SCSI] sd,sr: kill compat SDEV_MEDIA_CHANGE event [SCSI] sd: implement sd_check_events()
2011-01-17RDMA/nes: Fix incorrect SFP+ link status detection on driver initMaciej Sosnowski1-4/+39
During iw_nes initialization the link status for SFP+ PHY is always detected as "up" regardless of real state (cable either connected or disconnected). Add SFP+ PHY specific link status detection to the iw_nes initialization procedure. Use link status recheck for netdev_open to detect delayed state updates. Signed-off-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-17RDMA/nes: Fix SFP+ link down detection issue with switch port disableMaciej Sosnowski4-0/+100
In case of SFP+ PHY, link status check at interrupt processing can give false results. For proper link status change detection a delayed recheck is needed to give nes registers time to settle. Add a periodic link status recheck scheduled at interrupt to detect potential delayed registers state changes. Addresses: http://bugs.openfabrics.org/bugzilla/show_bug.cgi?id=2117 Signed-off-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-17RDMA/nes: Generate IB_EVENT_PORT_ERR/PORT_ACTIVE eventsMaciej Sosnowski4-9/+83
Depending on link state change, IB_EVENT_PORT_ERR or IB_EVENT_PORT_ACTIVE should be generated when handling MAC interrupts. Plugging in a cable happens to result in series of interrupts changing driver's link state a number of times before finally staying at link up (e.g. link up, link down, link up, link down, ..., link up). To prevent sending series of redundant IB_EVENT_PORT_ACTIVE and IB_EVENT_PORT_ERR events, we use a timer to debounce them in nes_port_ibevent(). Signed-off-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-17RDMA/nes: Fix bonding on iw_nesMaciej Sosnowski2-6/+26
Enable configuring bonds on nes devices by adding missing support for master net_device to the driver. Signed-off-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-17net: Make NETCONSOLE_DYNAMIC depend on CONFIGFS_FSNicholas Bellinger1-2/+1
This patch fixes the following kconfig error after changing CONFIGFS_FS -> select SYSFS: fs/sysfs/Kconfig:1:error: recursive dependency detected! fs/sysfs/Kconfig:1: symbol SYSFS is selected by CONFIGFS_FS fs/configfs/Kconfig:1: symbol CONFIGFS_FS is selected by NETCONSOLE_DYNAMIC drivers/net/Kconfig:3390: symbol NETCONSOLE_DYNAMIC depends on SYSFS Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Cc: Joel Becker <jlbec@evilplan.org> Cc: Randy Dunlap <randy.dunlap@oracle.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: James Bottomley <James.Bottomley@suse.de>
2011-01-16ACPI: Fix boot problem related to APEI with acpi_disabled setRafael J. Wysocki2-5/+5
Commit 415e12b23792 ("PCI/ACPI: Request _OSC control once for each root bridge (v3)") put the acpi_hest_init() call in acpi_pci_root_init() into a wrong place, presumably because the author confused acpi_pci_disabled with acpi_disabled. Bring the code ordering in acpi_pci_root_init() back to sanity. Additionally, make sure that hest_disable is set when acpi_disabled is set, which is going to prevent acpi_hest_parse(), that still may be executed for acpi_disabled=1 through aer_acpi_firmware_first(), from crashing because of uninitialized hest_tab. Reported-and-tested-by: Andres Salomon <dilinger@queued.net> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-16Merge branch 'for-linus' of ↵Linus Torvalds2-4/+3
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (23 commits) sanitize vfsmount refcounting changes fix old umount_tree() breakage autofs4: Merge the remaining dentry ops tables Unexport do_add_mount() and add in follow_automount(), not ->d_automount() Allow d_manage() to be used in RCU-walk mode Remove a further kludge from __do_follow_link() autofs4: Bump version autofs4: Add v4 pseudo direct mount support autofs4: Fix wait validation autofs4: Clean up autofs4_free_ino() autofs4: Clean up dentry operations autofs4: Clean up inode operations autofs4: Remove unused code autofs4: Add d_manage() dentry operation autofs4: Add d_automount() dentry operation Remove the automount through follow_link() kludge code from pathwalk CIFS: Use d_automount() rather than abusing follow_link() NFS: Use d_automount() rather than abusing follow_link() AFS: Use d_automount() rather than abusing follow_link() Add an AT_NO_AUTOMOUNT flag to suppress terminal automount ...
2011-01-16sanitize vfsmount refcounting changesAl Viro1-1/+1
Instead of splitting refcount between (per-cpu) mnt_count and (SMP-only) mnt_longrefs, make all references contribute to mnt_count again and keep track of how many are longterm ones. Accounting rules for longterm count: * 1 for each fs_struct.root.mnt * 1 for each fs_struct.pwd.mnt * 1 for having non-NULL ->mnt_ns * decrement to 0 happens only under vfsmount lock exclusive That allows nice common case for mntput() - since we can't drop the final reference until after mnt_longterm has reached 0 due to the rules above, mntput() can grab vfsmount lock shared and check mnt_longterm. If it turns out to be non-zero (which is the common case), we know that this is not the final mntput() and can just blindly decrement percpu mnt_count. Otherwise we grab vfsmount lock exclusive and do usual decrement-and-check of percpu mnt_count. For fs_struct.c we have mnt_make_longterm() and mnt_make_shortterm(); namespace.c uses the latter in places where we don't already hold vfsmount lock exclusive and opencodes a few remaining spots where we need to manipulate mnt_longterm. Note that we mostly revert the code outside of fs/namespace.c back to what we used to have; in particular, normal code doesn't need to care about two kinds of references, etc. And we get to keep the optimization Nick's variant had bought us... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-01-16dt/flattree: Return virtual address from early_init_dt_alloc_memory_arch()Grant Likely1-7/+1
The physical address is never used by the device tree code when allocating memory for unflattening. Change the architecture's alloc hook to return the virutal address instead. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-01-16Add a dentry op to allow processes to be held during pathwalk transitDavid Howells1-3/+2
Add a dentry op (d_manage) to permit a filesystem to hold a process and make it sleep when it tries to transit away from one of that filesystem's directories during a pathwalk. The operation is keyed off a new dentry flag (DCACHE_MANAGE_TRANSIT). The filesystem is allowed to be selective about which processes it holds and which it permits to continue on or prohibits from transiting from each flagged directory. This will allow autofs to hold up client processes whilst letting its userspace daemon through to maintain the directory or the stuff behind it or mounted upon it. The ->d_manage() dentry operation: int (*d_manage)(struct path *path, bool mounting_here); takes a pointer to the directory about to be transited away from and a flag indicating whether the transit is undertaken by do_add_mount() or do_move_mount() skipping through a pile of filesystems mounted on a mountpoint. It should return 0 if successful and to let the process continue on its way; -EISDIR to prohibit the caller from skipping to overmounted filesystems or automounting, and to use this directory; or some other error code to return to the user. ->d_manage() is called with namespace_sem writelocked if mounting_here is true and no other locks held, so it may sleep. However, if mounting_here is true, it may not initiate or wait for a mount or unmount upon the parameter directory, even if the act is actually performed by userspace. Within fs/namei.c, follow_managed() is extended to check with d_manage() first on each managed directory, before transiting away from it or attempting to automount upon it. follow_down() is renamed follow_down_one() and should only be used where the filesystem deliberately intends to avoid management steps (e.g. autofs). A new follow_down() is added that incorporates the loop done by all other callers of follow_down() (do_add/move_mount(), autofs and NFSD; whilst AFS, NFS and CIFS do use it, their use is removed by converting them to use d_automount()). The new follow_down() calls d_manage() as appropriate. It also takes an extra parameter to indicate if it is being called from mount code (with namespace_sem writelocked) which it passes to d_manage(). follow_down() ignores automount points so that it can be used to mount on them. __follow_mount_rcu() is made to abort rcu-walk mode if it hits a directory with DCACHE_MANAGE_TRANSIT set on the basis that we're probably going to have to sleep. It would be possible to enter d_manage() in rcu-walk mode too, and have that determine whether to abort or not itself. That would allow the autofs daemon to continue on in rcu-walk mode. Note that DCACHE_MANAGE_TRANSIT on a directory should be cleared when it isn't required as every tranist from that directory will cause d_manage() to be invoked. It can always be set again when necessary. ========================== WHAT THIS MEANS FOR AUTOFS ========================== Autofs currently uses the lookup() inode op and the d_revalidate() dentry op to trigger the automounting of indirect mounts, and both of these can be called with i_mutex held. autofs knows that the i_mutex will be held by the caller in lookup(), and so can drop it before invoking the daemon - but this isn't so for d_revalidate(), since the lock is only held on _some_ of the code paths that call it. This means that autofs can't risk dropping i_mutex from its d_revalidate() function before it calls the daemon. The bug could manifest itself as, for example, a process that's trying to validate an automount dentry that gets made to wait because that dentry is expired and needs cleaning up: mkdir S ffffffff8014e05a 0 32580 24956 Call Trace: [<ffffffff885371fd>] :autofs4:autofs4_wait+0x674/0x897 [<ffffffff80127f7d>] avc_has_perm+0x46/0x58 [<ffffffff8009fdcf>] autoremove_wake_function+0x0/0x2e [<ffffffff88537be6>] :autofs4:autofs4_expire_wait+0x41/0x6b [<ffffffff88535cfc>] :autofs4:autofs4_revalidate+0x91/0x149 [<ffffffff80036d96>] __lookup_hash+0xa0/0x12f [<ffffffff80057a2f>] lookup_create+0x46/0x80 [<ffffffff800e6e31>] sys_mkdirat+0x56/0xe4 versus the automount daemon which wants to remove that dentry, but can't because the normal process is holding the i_mutex lock: automount D ffffffff8014e05a 0 32581 1 32561 Call Trace: [<ffffffff80063c3f>] __mutex_lock_slowpath+0x60/0x9b [<ffffffff8000ccf1>] do_path_lookup+0x2ca/0x2f1 [<ffffffff80063c89>] .text.lock.mutex+0xf/0x14 [<ffffffff800e6d55>] do_rmdir+0x77/0xde [<ffffffff8005d229>] tracesys+0x71/0xe0 [<ffffffff8005d28d>] tracesys+0xd5/0xe0 which means that the system is deadlocked. This patch allows autofs to hold up normal processes whilst the daemon goes ahead and does things to the dentry tree behind the automouter point without risking a deadlock as almost no locks are held in d_manage() and none in d_automount(). Signed-off-by: David Howells <dhowells@redhat.com> Was-Acked-by: Ian Kent <raven@themaw.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-01-15Merge branches 'core-fixes-for-linus', 'x86-fixes-for-linus', ↵Linus Torvalds1-6/+2
'timers-fixes-for-linus' and 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: rcu: avoid pointless blocked-task warnings rcu: demote SRCU_SYNCHRONIZE_DELAY from kernel-parameter status rtmutex: Fix comment about why new_owner can be NULL in wake_futex_pi() * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, olpc: Add missing Kconfig dependencies x86, mrst: Set correct APB timer IRQ affinity for secondary cpu x86: tsc: Fix calibration refinement conditionals to avoid divide by zero x86, ia64, acpi: Clean up x86-ism in drivers/acpi/numa.c * 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: timekeeping: Make local variables static time: Rename misnamed minsec argument of clocks_calc_mult_shift() * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: tracing: Remove syscall_exit_fields tracing: Only process module tracepoints once perf record: Add "nodelay" mode, disabled by default perf sched: Fix list of events, dropping unsupported ':r' modifier Revert "perf tools: Emit clearer message for sys_perf_event_open ENOENT return" perf top: Fix annotate segv perf evsel: Fix order of event list deletion
2011-01-15Merge branch 'devel-stable' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds1-2/+2
* 'devel-stable' of master.kernel.org:/home/rmk/linux-2.6-arm: (161 commits) ARM: pxa: fix building issue of missing physmap.h ARM: mmp: PXA910 drive strength FAST using wrong value ARM: mmp: MMP2 drive strength FAST using wrong value ARM: pxa: fix recursive calls in pxa_low_gpio_chip AT91: Support for gsia18s board AT91: Acme Systems FOX Board G20 board files AT91: board-sam9m10g45ek.c: Remove duplicate inclusion of mach/hardware.h ARM: pxa: fix suspend/resume array index miscalculation ARM: pxa: use cpu_has_ipr() consistently in irq.c ARM: pxa: remove unused variable in clock-pxa3xx.c ARM: pxa: fix warning in zeus.c ARM: sa1111: fix typo in sa1111_retrigger_lowirq() ARM mxs: clkdev related compile fixes ARM i.MX mx31_3ds: Fix MC13783 regulator names ARM: plat-stmp3xxx: irq_data conversion. ARM: plat-spear: irq_data conversion. ARM: plat-orion: irq_data conversion. ARM: plat-omap: irq_data conversion. ARM: plat-nomadik: irq_data conversion. ARM: plat-mxc: irq_data conversion. ... Fix up trivial conflict in arch/arm/plat-omap/gpio.c (Lennert Buytenhek's irq_data conversion clashing with some omap irq updates)
2011-01-15Merge branch 'fixes' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds1-3/+3
* 'fixes' of master.kernel.org:/home/rmk/linux-2.6-arm: ARM: fix missing branch in __error_a ARM: fix /proc/$PID/stack on SMP ARM: Fix build regression on SA11x0, PXA, and H720x targets ARM: 6625/1: use memblock memory regions for "System RAM" I/O resources ARM: fix wrongly patched constants ARM: 6624/1: fix dependency for CONFIG_SMP_ON_UP ARM: 6623/1: Thumb-2: Fix out-of-range offset for Thumb-2 in proc-v7.S ARM: 6622/1: fix dma_unmap_sg() documentation ARM: 6621/1: bitops: remove condition code clobber for CLZ ARM: 6620/1: Change misleading warning when CONFIG_CMDLINE_FORCE is used ARM: 6619/1: nommu: avoid mapping vectors page when !CONFIG_MMU ARM: sched_clock: make minsec argument to clocks_calc_mult_shift() zero ARM: sched_clock: allow init_sched_clock() to be called early ARM: integrator: fix compile warning in cpu.c ARM: 6616/1: Fix ep93xx-fb init/exit annotations ARM: twd: fix display of twd frequency ARM: udelay: prevent math rounding resulting in short udelays
2011-01-15Merge branch 'for-rmk' of ↵Russell King1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into devel-stable
2011-01-15Update CONFIG_MD_RAID6_PQ to CONFIG_RAID6_PQ in drivers/dma/iop-adma.cWei Yongquan1-2/+2
Commit f5e70d0fe3ea990cfb3fc8d7f76a719adcb1e0b5 renamed MD_RAID6_PQ to RAID6_PQ, but iop-adma.c didn't update synchronously. Signed-off-by: Wei Yongquan <weiyqlq@gmail.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-15dmaengine: at_hdmac: fix race while monitoring channel statusNicolas Ferre1-2/+2
We were reading channel status then taking a lock. This lead to a race because this lock may delay us and then make this channel not idle anymore. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-15dmaengine: at_hdmac: flags located in first descriptorNicolas Ferre1-3/+3
Place flags on first descriptor of chain instead of last. This is the one used by atc_chain_complete() function while unmapping. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-15dmaengine: at_hdmac: use subsys_initcall instead of module_initEric Xu1-1/+1
Use subsys_initcall instead of module_init in order to keep DMA engine rolling before other peripheral drivers. Signed-off-by: Eric Xu <hong.xu@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-15dmaengine: at_hdmac: no need set ACK in new descriptorNicolas Ferre1-1/+0
Following descriptor flow in at_hdmac driver, descriptor comming from atc_desc_get() as already DMA_CTRL_ACK flag set. No need to set it again. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-15dmaengine: at_hdmac: trivial add precision to unmapping commentNicolas Ferre1-1/+1
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-post-merge-2.6Linus Torvalds35-58/+27472
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-post-merge-2.6: [SCSI] target: Add LIO target core v4.0.0-rc6 [SCSI] sd,sr: kill compat SDEV_MEDIA_CHANGE event [SCSI] sd: implement sd_check_events()
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-14 06:11:30 +0300