summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2021-02-15gpio: mvebu: add pwm support for Armada 8K/7KBaruch Siach1-33/+68
Use the marvell,pwm-offset DT property to store the location of PWM signal duration registers. Since we have more than two GPIO chips per system, we can't use the alias id to differentiate between them. Use the offset value for that. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-02-15gpio: tegra: Fix irq_set_affinityDmitry Osipenko1-1/+2
The irq_set_affinity callback should not be set if parent IRQ domain doesn't present because gpio-tegra driver callback fails in this case, causing a noisy error messages on system suspend: Disabling non-boot CPUs ... IRQ 26: no longer affine to CPU1 IRQ128: set affinity failed(-22). IRQ130: set affinity failed(-22). IRQ131: set affinity failed(-22). IRQ 27: no longer affine to CPU2 IRQ128: set affinity failed(-22). IRQ130: set affinity failed(-22). IRQ131: set affinity failed(-22). IRQ 28: no longer affine to CPU3 IRQ128: set affinity failed(-22). IRQ130: set affinity failed(-22). IRQ131: set affinity failed(-22). Entering suspend state LP1 Hence just don't specify the irq_set_affinity callback if parent PMC IRQ domain is missing. Tegra isn't capable of setting affinity per GPIO, affinity could be set only per GPIO bank, thus there is nothing to do for gpio-tegra in regards to CPU affinity without the parent IRQ domain. Tested-by: Peter Geis <pgwipeout@gmail.com> # Ouya T30 Tested-by: Matt Merhar <mattmerhar@protonmail.com> # Ouya T30 Tested-by: Dmitry Osipenko <digetx@gmail.com> # A500 T20 and Nexus7 T30 Fixes: efcdca286eef ("gpio: tegra: Convert to gpio_irq_chip") Reported-by: Matt Merhar <mattmerhar@protonmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-02-15gpio: tegra: Support building driver as a loadable moduleDmitry Osipenko2-7/+10
Support building driver as a loadable kernel module. This allows to reduce size of a kernel zImage, which is important for some devices since size of kernel partition may be limited and since some bootloader variants have known problems in regards to the initrd placement if kernel image is too big. $ lsmod Module Size Used by gpio_tegra 16384 27 Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-02-15gpio: tegra: Clean up whitespaces in tegra_gpio_driverDmitry Osipenko1-4/+4
Clean up inconsistent whitespaces and tabs in the definition of tegra_gpio_driver to make code look better a tad. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-02-15gpio: tegra: Use debugfs_create_devm_seqfile()Dmitry Osipenko1-5/+3
Use resource-managed variant of debugfs_create_file(0444) to prepare code for the modularization of the driver. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-02-15gpio: tegra: Improve formatting of the codeDmitry Osipenko1-5/+10
Don't cross 80 chars of line length in order to keep formatting of the code consistent. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-02-15gpio: mvebu: improve handling of pwm zero on/off valuesBaruch Siach1-16/+23
Hardware appears to treat zero value as 2^32. Take advantage of this fact to support on/off values of up to UINT_MAX+1 == 2^32. Adjust both .apply and .get_state to handle zero as a special case. Rounded up division result in .get_state can't be zero, since the dividend is now larger than 0. Remove check for this case. Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Analyzed-by: Russell King <linux@armlinux.org.uk> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-02-15gpio: mvebu: don't limit pwm period/duty_cycle to UINT_MAXBaruch Siach1-6/+2
PWM on/off registers are limited to UINT_MAX. However the state period and duty_cycle fields are ns values of type u64. There is no reason to limit them to UINT_MAX. Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-02-15gpio: mvebu: make pwm .get_state closer to idempotentBaruch Siach1-2/+2
Round up the divisions in .get_state() to make applying the read out configuration idempotent in most cases as .apply rounds down. Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-02-15gpio: mvebu: improve pwm period calculation accuracyBaruch Siach1-2/+2
Change 'off' register value calculation from $off = (period - duty_cycle) * clkrate / NSEC_PER_SEC to $off = (period * clkrate / NSEC_PER_SEC) - $on That is, divide the full period value to reduce rounding error. Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-02-15gpio: mockup: tweak the Kconfig help textBartosz Golaszewski1-2/+1
gpio-mockup doesn't require SYSFS to be selected so drop that bit from the Kconfig text. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2021-02-15gpio: wcove: convert comma to semicolonZheng Yongjun1-1/+1
Replace a comma between expression statements by a semicolon. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-02-15gpio: vx855: convert comma to semicolonZheng Yongjun1-1/+1
Replace a comma between expression statements by a semicolon. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-02-15gpio: tegra186: convert comma to semicolonZheng Yongjun1-1/+1
Replace a comma between expression statements by a semicolon. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-02-15gpio: max77620: convert comma to semicolonZheng Yongjun1-1/+1
Replace a comma between expression statements by a semicolon. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-02-15gpio: remove zte zx driverArnd Bergmann3-297/+0
The zte zx platform is getting removed, so this driver is no longer needed. Cc: Jun Nie <jun.nie@linaro.org> Cc: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-02-15gpio: tegra: Fix wake interruptDmitry Osipenko1-3/+13
The GPIO bank wake interrupt setting was erroneously removed after conversion to gpio_irq_chip, thus the wake interrupt programming is broken now. Secondly, the wake_enb of the GPIO driver should be changed only after the successful toggling of the IRQ wake-state. Restore the wake interrupt setting and the programming order. Fixes: efcdca286eef ("gpio: tegra: Convert to gpio_irq_chip") Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-02-15gpio: pca953x: Add support for pca9506Uwe Kleine-König1-0/+2
According to the reference manual "The PCA9505 is identical to the PCA9506 except that it includes 100 kΩ internal pull-up resistors on all the I/Os." So the pca9506 device can be considered identical to the pca9505 for the gpio driver. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-02-15gpio: rcar: Add R-Car V3U (R8A779A0) supportGeert Uytterhoeven1-0/+35
Add support for the GPIO controller block in the R-Car V3U (R8A779A0) SoC, which is very similar to the block found on other R-Car Gen3 SoCs. However, this block has a new General Input Enable Register (INEN), whose reset state is to have all inputs disabled. Enable input for all available pins in probe and resume, to support the use of the General Input Register (INDT) for reading pin state at all times. This preserves backwards compatibility with other R-Car Gen3 SoCs, as recommended by the Hardware Manual. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-02-15gpio: rcar: Optimize GPIO pin state read on R-Car Gen3Geert Uytterhoeven1-5/+20
Currently, the R-Car GPIO driver treats R-Car Gen2 and R-Car Gen3 GPIO controllers the same. However, there exist small differences, like the behavior of the General Input Register (INDT): - On R-Car Gen1, R-Car Gen2, and RZ/G1, INDT only reflects the state of an input pin if the GPIO is configured for input, - On R-Car Gen3 and RZ/G2, INDT always reflects the state of the input pins. Hence to accommodate all variants, the driver does not use the INDT register to read the status of a GPIO line when configured for output, at the expense of doing 2 or 3 register reads instead of 1. Given register accesses are slow, change the .get() and .get_multiple() callbacks to always use INDT to read pin state on SoCs where this is supported. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-02-15gpio: bd7xxxx: use helper variable for pdev->devBartosz Golaszewski2-17/+15
Using a helper local variable to store the address of &pdev->dev adds to readability and allows us to avoid unnecessary line breaks. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
2021-02-15gpio: tegra: Convert to gpio_irq_chipThierry Reding1-72/+146
Convert the Tegra GPIO driver to use the gpio_irq_chip infrastructure. This allows a bit of boiler plate to be removed and while at it enables support for hierarchical domains, which is useful to support PMC wake events on Tegra210 and earlier. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-02-15gpio: visconti: Add Toshiba Visconti GPIO supportNobuhiro Iwamatsu4-0/+252
Add the GPIO driver for Toshiba Visconti ARM SoCs. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Reviewed-by: Punit Agrawal <punit1.agrawal@toshiba.co.jp> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-02-15gpio: bd7xxxx: Do not depend on parent driver dataMatti Vaittinen2-41/+33
The ROHM BD70528 and BD71828 GPIO drivers only need the regmap pointer from parent. Regmap can be obtained via dev_get_regmap() so do not require parent to populate driver data for that. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-02-15gpio: Kconfig: Update help description for GPIO_RCAR configLad Prabhakar1-2/+2
The gpio-rcar driver also supports RZ/G SoC's, update the description to reflect this. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-02-15gpio: sl28cpld: convert comma to semicolonZheng Yongjun1-2/+2
Replace a comma between expression statements by a semicolon. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-02-15gpio: rcar: Remove redundant compatible valuesLad Prabhakar1-27/+0
The mandatory compatible values 'renesas,rcar-gen{1,2,3}-gpio' have been already added to all the respective R-Car Gen{1,2,3} SoC DTSI files, remove the redundant device specific values from the driver. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-02-15gpio: fix spelling mistake in Kconfig "supprot" -> "support"Colin Ian King1-1/+1
There is a spelling mistake in the Kconfig help text. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-02-14Merge branch 'for-rc8-5.11' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds Pull LED fix from Pavel Machek: "One-liner fixing a build problem" * 'for-rc8-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds: leds: rt8515: add V4L2_FLASH_LED_CLASS dependency
2021-02-14leds: rt8515: add V4L2_FLASH_LED_CLASS dependencyArnd Bergmann1-0/+1
The leds-rt8515 driver can optionall use the v4l2 flash led class, but it causes a link error when that class is in a loadable module and the rt8515 driver itself is built-in: ld.lld: error: undefined symbol: v4l2_flash_init >>> referenced by leds-rt8515.c >>> leds/flash/leds-rt8515.o:(rt8515_probe) in archive drivers/built-in.a Adding 'depends on V4L2_FLASH_LED_CLASS' in Kconfig would avoid that, but it would make it impossible to use the driver without the v4l2 support. Add the same dependency that the other users of this class have instead, which just prevents the broken configuration. Fixes: e1c6edcbea13 ("leds: rt8515: Add Richtek RT8515 LED driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2021-02-14Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fix from Stephen Boyd: "One small fix for the Allwinner clk driver so that display clks figure out the correct rate to use. This fixes displays running 4k@60Hz and some other resolutions that haven't been exercised and fully understood until now" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: sunxi-ng: mp: fix parent rate change flag check
2021-02-14Merge tag 'scsi-fixes' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fix from James Bottomley: "One fix for scsi_debug that fixes a memory leak on module removal" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: scsi_debug: Fix a memory leak
2021-02-13Merge branch 'i2c/for-current' of ↵Linus Torvalds1-1/+10
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fix from Wolfram Sang: "One more I2C driver bugfix" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: stm32f7: fix configuration of the digital filter
2021-02-12Merge tag 'drm-fixes-2021-02-12' of git://anongit.freedesktop.org/drm/drmLinus Torvalds12-78/+122
Pull drm fixes from Dave Airlie: "Regular fixes for final, there is a ttm regression fix, dp-mst fix, one amdgpu revert, two i915 fixes, and some misc fixes for sun4i, xlnx, and vc4. All pretty quiet and don't think we have any known outstanding regressions. ttm: - page pool regression fix. dp_mst: - don't report un-attached ports as connected amdgpu: - blank screen fix i915: - ensure Type-C FIA is powered when initializing - fix overlay frontbuffer tracking sun4i: - tcon1 sync polarity fix - always set HDMI clock rate - fix H6 HDMI PHY config - fix H6 max frequency vc4: - fix buffer overflow xlnx: - fix memory leak" * tag 'drm-fixes-2021-02-12' of git://anongit.freedesktop.org/drm/drm: drm/ttm: make sure pool pages are cleared drm/sun4i: dw-hdmi: Fix max. frequency for H6 drm/sun4i: Fix H6 HDMI PHY configuration drm/sun4i: dw-hdmi: always set clock rate drm/sun4i: tcon: set sync polarity for tcon1 channel drm/i915: Fix overlay frontbuffer tracking Revert "drm/amd/display: Update NV1x SR latency values" drm/i915/tgl+: Make sure TypeC FIA is powered up when initializing it drm/dp_mst: Don't report ports connected if nothing is attached to them drm/xlnx: fix kmemleak by sending vblank_event in atomic_disable drm/vc4: hvs: Fix buffer overflow with the dlist handling
2021-02-12Merge tag 'for-linus-5.11-rc8-tag' of ↵Linus Torvalds2-2/+1
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fix from Juergen Gross: "A single fix for an issue introduced this development cycle: when running as a Xen guest on Arm systems the kernel will hang during boot" * tag 'for-linus-5.11-rc8-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: arm/xen: Don't probe xenbus as part of an early initcall
2021-02-12i2c: stm32f7: fix configuration of the digital filterAlain Volmat1-1/+10
The digital filter related computation are present in the driver however the programming of the filter within the IP is missing. The maximum value for the DNF is wrong and should be 15 instead of 16. Fixes: aeb068c57214 ("i2c: i2c-stm32f7: add driver") Signed-off-by: Alain Volmat <alain.volmat@foss.st.com> Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@foss.st.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-02-12Merge branch 'drm-misc-fixes' of git://anongit.freedesktop.org/drm/drm-misc ↵Dave Airlie9-37/+75
into drm-fixes (I've pulled from a non-tag to get the ttm regression fix) drm-misc-fixes-2021-02-10: * dp_mst: Don't report un-attached ports as connected * sun4i: tcon1 sync polarity fix; Always set HDMI clock rate; Fix H6 HDMI PHY config; Fix H6 max frequency * vc4: Fix buffer overflow * xlnx: Fix memory leak * ttm: page pool regression fix. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/YCPo6g3gDxD3P//h@linux-uq9g
2021-02-12clk: sunxi-ng: mp: fix parent rate change flag checkJernej Skrabec1-1/+1
CLK_SET_RATE_PARENT flag is checked on parent clock instead of current one. Fix that. Fixes: 3f790433c3cb ("clk: sunxi-ng: Adjust MP clock parent rate when allowed") Reviewed-by: Chen-Yu Tsai <wens@csie.org> Tested-by: Andre Heider <a.heider@gmail.com> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Link: https://lore.kernel.org/r/20210209175900.7092-2-jernej.skrabec@siol.net Acked-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-02-12Merge tag 'drm-intel-fixes-2021-02-11' of ↵Dave Airlie2-39/+45
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes drm/i915 fixes for v5.11 final: - Ensure Type-C FIA is powered when initializing - Fix overlay frontbuffer tracking Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87r1lnc78t.fsf@intel.com
2021-02-11Merge tag 'gpio-fixes-for-v5.11' of ↵Linus Torvalds2-99/+120
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio fixes from Bartosz Golaszewski: "This is hopefully the last batch of fixes for this release cycle. We have a minor fix for a Kconfig regression as well as fixes for older bugs in gpio-ep93xx: - don't build gpio-mxs unconditionally with COMPILE_TEST enabled - fix two problems with interrupt handling in gpio-ep93xx" * tag 'gpio-fixes-for-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: gpio: ep93xx: Fix single irqchip with multi gpiochips gpio: ep93xx: fix BUG_ON port F usage gpio: mxs: GPIO_MXS should not default to y unconditionally
2021-02-11drm/ttm: make sure pool pages are clearedChristian König1-0/+10
The old implementation wasn't consistend on this. But it looks like we depend on this so better bring it back. Signed-off-by: Christian König <christian.koenig@amd.com> Reported-and-tested-by: Mike Galbraith <efault@gmx.de> Fixes: d099fc8f540a ("drm/ttm: new TT backend allocation pool v3") Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210210160549.1462-1-christian.koenig@amd.com
2021-02-11arm/xen: Don't probe xenbus as part of an early initcallJulien Grall2-2/+1
After Commit 3499ba8198cad ("xen: Fix event channel callback via INTX/GSI"), xenbus_probe() will be called too early on Arm. This will recent to a guest hang during boot. If the hang wasn't there, we would have ended up to call xenbus_probe() twice (the second time is in xenbus_probe_initcall()). We don't need to initialize xenbus_probe() early for Arm guest. Therefore, the call in xen_guest_init() is now removed. After this change, there is no more external caller for xenbus_probe(). So the function is turned to a static one. Interestingly there were two prototypes for it. Cc: stable@vger.kernel.org Fixes: 3499ba8198cad ("xen: Fix event channel callback via INTX/GSI") Reported-by: Ian Jackson <iwj@xenproject.org> Signed-off-by: Julien Grall <jgrall@amazon.com> Reviewed-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Link: https://lore.kernel.org/r/20210210170654.5377-1-julien@xen.org Signed-off-by: Juergen Gross <jgross@suse.com>
2021-02-10Merge tag 'pm-5.11-rc8' of ↵Linus Torvalds1-12/+103
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "Address a performance regression related to scale-invariance on x86 that may prevent turbo CPU frequencies from being used in certain workloads on systems using acpi-cpufreq as the CPU performance scaling driver and schedutil as the scaling governor" * tag 'pm-5.11-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: ACPI: Update arch scale-invariance max perf ratio if CPPC is not there cpufreq: ACPI: Extend frequency tables to cover boost frequencies
2021-02-10Merge tag 'acpi-5.11-rc8' of ↵Linus Torvalds1-4/+13
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fix from Rafael Wysocki: "Revert a problematic ACPICA commit that changed the code to attempt to update memory regions which may be read-only on some systems (Ard Biesheuvel)" * tag 'acpi-5.11-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: Revert "ACPICA: Interpreter: fix memory leak by using existing buffer"
2021-02-10Merge tag 'dmaengine-fix2-5.11' of ↵Linus Torvalds8-63/+104
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine Pull dmaengine fixes from Vinod Koul: "Some late fixes for dmaengine: Core: - fix channel device_node deletion Driver fixes: - dw: revert of runtime pm enabling - idxd: device state fix, interrupt completion and list corruption - ti: resource leak * tag 'dmaengine-fix2-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: dmaengine dw: Revert "dmaengine: dw: Enable runtime PM" dmaengine: idxd: check device state before issue command dmaengine: ti: k3-udma: Fix a resource leak in an error handling path dmaengine: move channel device_node deletion to driver dmaengine: idxd: fix misc interrupt completion dmaengine: idxd: Fix list corruption in description completion
2021-02-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds20-28/+261
Pull networking fixes from David Miller: "Another pile of networing fixes: 1) ath9k build error fix from Arnd Bergmann 2) dma memory leak fix in mediatec driver from Lorenzo Bianconi. 3) bpf int3 kprobe fix from Alexei Starovoitov. 4) bpf stackmap integer overflow fix from Bui Quang Minh. 5) Add usb device ids for Cinterion MV31 to qmi_qwwan driver, from Christoph Schemmel. 6) Don't update deleted entry in xt_recent netfilter module, from Jazsef Kadlecsik. 7) Use after free in nftables, fix from Pablo Neira Ayuso. 8) Header checksum fix in flowtable from Sven Auhagen. 9) Validate user controlled length in qrtr code, from Sabyrzhan Tasbolatov. 10) Fix race in xen/netback, from Juergen Gross, 11) New device ID in cxgb4, from Raju Rangoju. 12) Fix ring locking in rxrpc release call, from David Howells. 13) Don't return LAPB error codes from x25_open(), from Xie He. 14) Missing error returns in gsi_channel_setup() from Alex Elder. 15) Get skb_copy_and_csum_datagram working properly with odd segment sizes, from Willem de Bruijn. 16) Missing RFS/RSS table init in enetc driver, from Vladimir Oltean. 17) Do teardown on probe failure in DSA, from Vladimir Oltean. 18) Fix compilation failures of txtimestamp selftest, from Vadim Fedorenko. 19) Limit rx per-napi gro queue size to fix latency regression, from Eric Dumazet. 20) dpaa_eth xdp fixes from Camelia Groza. 21) Missing txq mode update when switching CBS off, in stmmac driver, from Mohammad Athari Bin Ismail. 22) Failover pending logic fix in ibmvnic driver, from Sukadev Bhattiprolu. 23) Null deref fix in vmw_vsock, from Norbert Slusarek. 24) Missing verdict update in xdp paths of ena driver, from Shay Agroskin. 25) seq_file iteration fix in sctp from Neil Brown. 26) bpf 32-bit src register truncation fix on div/mod, from Daniel Borkmann. 27) Fix jmp32 pruning in bpf verifier, from Daniel Borkmann. 28) Fix locking in vsock_shutdown(), from Stefano Garzarella. 29) Various missing index bound checks in hns3 driver, from Yufeng Mo. 30) Flush ports on .phylink_mac_link_down() in dsa felix driver, from Vladimir Oltean. 31) Don't mix up stp and mrp port states in bridge layer, from Horatiu Vultur. 32) Fix locking during netif_tx_disable(), from Edwin Peer" * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (45 commits) bpf: Fix 32 bit src register truncation on div/mod bpf: Fix verifier jmp32 pruning decision logic bpf: Fix verifier jsgt branch analysis on max bound vsock: fix locking in vsock_shutdown() net: hns3: add a check for index in hclge_get_rss_key() net: hns3: add a check for tqp_index in hclge_get_ring_chain_from_mbx() net: hns3: add a check for queue_id in hclge_reset_vf_queue() net: dsa: felix: implement port flushing on .phylink_mac_link_down switchdev: mrp: Remove SWITCHDEV_ATTR_ID_MRP_PORT_STAT bridge: mrp: Fix the usage of br_mrp_port_switchdev_set_state net: watchdog: hold device global xmit lock during tx disable netfilter: nftables: relax check for stateful expressions in set definition netfilter: conntrack: skip identical origin tuple in same zone only vsock/virtio: update credit only if socket is not closed net: fix iteration for sctp transport seq_files net: ena: Update XDP verdict upon failure net/vmw_vsock: improve locking in vsock_connect_timeout() net/vmw_vsock: fix NULL pointer dereference ibmvnic: Clear failover_pending if unable to schedule net: stmmac: set TxQ mode back to DCB after disabling CBS ...
2021-02-10gpio: ep93xx: Fix single irqchip with multi gpiochipsNikita Shubin1-11/+19
Fixes the following warnings which results in interrupts disabled on port B/F: gpio gpiochip1: (B): detected irqchip that is shared with multiple gpiochips: please fix the driver. gpio gpiochip5: (F): detected irqchip that is shared with multiple gpiochips: please fix the driver. - added separate irqchip for each interrupt capable gpiochip - provided unique names for each irqchip Fixes: d2b091961510 ("gpio: ep93xx: Pass irqchip when adding gpiochip") Cc: <stable@vger.kernel.org> Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me> Tested-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-02-10gpio: ep93xx: fix BUG_ON port F usageNikita Shubin1-87/+99
Two index spaces and ep93xx_gpio_port are confusing. Instead add a separate struct to store necessary data and remove ep93xx_gpio_port. - add struct to store IRQ related data for each IRQ capable chip - replace offset array with defined offsets - add IRQ registers offset for each IRQ capable chip into ep93xx_gpio_banks ------------[ cut here ]------------ kernel BUG at drivers/gpio/gpio-ep93xx.c:64! ---[ end trace 3f6544e133e9f5ae ]--- Fixes: fd935fc421e74 ("gpio: ep93xx: Do not pingpong irq numbers") Cc: <stable@vger.kernel.org> Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Tested-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-02-10gpio: mxs: GPIO_MXS should not default to y unconditionallyGeert Uytterhoeven1-1/+2
Merely enabling CONFIG_COMPILE_TEST should not enable additional code. To fix this, restrict the automatic enabling of GPIO_MXS to ARCH_MXS, and ask the user in case of compile-testing. Fixes: 6876ca311bfca5d7 ("gpio: mxs: add COMPILE_TEST support for GPIO_MXS") Cc: <stable@vger.kernel.org> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-02-10drm/sun4i: dw-hdmi: Fix max. frequency for H6Jernej Skrabec1-4/+2
It turns out that reasoning for lowering max. supported frequency is wrong. Scrambling works just fine. Several now fixed bugs prevented proper functioning, even with rates lower than 340 MHz. Issues were just more pronounced with higher frequencies. Fix that by allowing max. supported frequency in HW and fix the comment. Fixes: cd9063757a22 ("drm/sun4i: DW HDMI: Lower max. supported rate for H6") Reviewed-by: Chen-Yu Tsai <wens@csie.org> Tested-by: Andre Heider <a.heider@gmail.com> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210209175900.7092-6-jernej.skrabec@siol.net
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-26 15:05:26 +0300