summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2011-03-23USB: cdc-acm: fix potential null-pointer dereference on disconnectJohan Hovold1-1/+2
Fix potential null-pointer exception on disconnect introduced by commit 11ea859d64b69a747d6b060b9ed1520eab1161fe (USB: additional power savings for cdc-acm devices that support remote wakeup). Only access acm->dev after making sure it is non-null in control urb completion handler. Cc: stable <stable@kernel.org> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-23USB: cdc-acm: fix potential null-pointer dereferenceJohan Hovold1-0/+2
Must check return value of tty_port_tty_get. Cc: stable <stable@kernel.org> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-23USB: cdc-acm: fix memory corruption / panicJohan Hovold1-0/+2
Prevent read urbs from being resubmitted from tasklet after port close. The receive tasklet was not disabled on port close, which could lead to corruption of receive lists on consecutive port open. In particular, read urbs could be re-submitted before port open, added to free list in open, and then added a second time to the free list in the completion handler. cdc-acm.c: Entering acm_tty_open. cdc-acm.c: acm_control_msg: rq: 0x22 val: 0x3 len: 0x0 result: 0 cdc-acm.c: Entering acm_rx_tasklet cdc-acm.c: acm_rx_tasklet: sending urb 0xf50da280, rcv 0xf57fbc24, buf 0xf57fbd64 cdc-acm.c: set line: 115200 0 0 8 cdc-acm.c: acm_control_msg: rq: 0x20 val: 0x0 len: 0x7 result: 7 cdc-acm.c: acm_tty_close cdc-acm.c: acm_port_down cdc-acm.c: acm_control_msg: rq: 0x22 val: 0x0 len: 0x0 result: 0 cdc-acm.c: acm_ctrl_irq - urb shutting down with status: -2 cdc-acm.c: acm_rx_tasklet: sending urb 0xf50da300, rcv 0xf57fbc10, buf 0xf57fbd50 cdc-acm.c: Entering acm_read_bulk with status -2 cdc_acm 4-1:1.1: Aborting, acm not ready cdc-acm.c: Entering acm_read_bulk with status -2 cdc_acm 4-1:1.1: Aborting, acm not ready cdc-acm.c: acm_rx_tasklet: sending urb 0xf50da380, rcv 0xf57fbbfc, buf 0xf57fbd3c cdc-acm.c: acm_rx_tasklet: sending urb 0xf50da400, rcv 0xf57fbbe8, buf 0xf57fbd28 cdc-acm.c: acm_rx_tasklet: sending urb 0xf50da480, rcv 0xf57fbbd4, buf 0xf57fbd14 cdc-acm.c: acm_rx_tasklet: sending urb 0xf50da900, rcv 0xf57fbbc0, buf 0xf57fbd00 cdc-acm.c: acm_rx_tasklet: sending urb 0xf50da980, rcv 0xf57fbbac, buf 0xf57fbcec cdc-acm.c: acm_rx_tasklet: sending urb 0xf50daa00, rcv 0xf57fbb98, buf 0xf57fbcd8 cdc-acm.c: acm_rx_tasklet: sending urb 0xf50daa80, rcv 0xf57fbb84, buf 0xf57fbcc4 cdc-acm.c: acm_rx_tasklet: sending urb 0xf50dab00, rcv 0xf57fbb70, buf 0xf57fbcb0 cdc-acm.c: acm_rx_tasklet: sending urb 0xf50dab80, rcv 0xf57fbb5c, buf 0xf57fbc9c cdc-acm.c: acm_rx_tasklet: sending urb 0xf50dac00, rcv 0xf57fbb48, buf 0xf57fbc88 cdc-acm.c: acm_rx_tasklet: sending urb 0xf50dac80, rcv 0xf57fbb34, buf 0xf57fbc74 cdc-acm.c: acm_rx_tasklet: sending urb 0xf50dad00, rcv 0xf57fbb20, buf 0xf57fbc60 cdc-acm.c: acm_rx_tasklet: sending urb 0xf50dad80, rcv 0xf57fbb0c, buf 0xf57fbc4c cdc-acm.c: acm_rx_tasklet: sending urb 0xf50da880, rcv 0xf57fbaf8, buf 0xf57fbc38 cdc-acm.c: Entering acm_tty_open. cdc-acm.c: acm_control_msg: rq: 0x22 val: 0x3 len: 0x0 result: 0 cdc-acm.c: Entering acm_rx_tasklet cdc-acm.c: acm_rx_tasklet: sending urb 0xf50da280, rcv 0xf57fbc24, buf 0xf57fbd64 cdc-acm.c: Entering acm_tty_write to write 3 bytes, cdc-acm.c: Get 3 bytes... cdc-acm.c: acm_write_start susp_count: 0 cdc-acm.c: Entering acm_read_bulk with status 0 ------------[ cut here ]------------ WARNING: at /home/johan/src/linux/linux-2.6/lib/list_debug.c:57 list_del+0x10c/0x120() Hardware name: Vostro 1520 list_del corruption. next->prev should be f57fbc10, but was f57fbaf8 Modules linked in: cdc_acm Pid: 3, comm: ksoftirqd/0 Not tainted 2.6.37+ #39 Call Trace: [<c103c7e2>] warn_slowpath_common+0x72/0xa0 [<c11dd8ac>] ? list_del+0x10c/0x120 [<c11dd8ac>] ? list_del+0x10c/0x120 [<c103c8b3>] warn_slowpath_fmt+0x33/0x40 [<c11dd8ac>] list_del+0x10c/0x120 [<f8051dbf>] acm_rx_tasklet+0xef/0x3e0 [cdc_acm] [<c135465d>] ? net_rps_action_and_irq_enable+0x6d/0x80 [<c1042bb6>] tasklet_action+0xe6/0x140 [<c104342f>] __do_softirq+0xaf/0x210 [<c1043380>] ? __do_softirq+0x0/0x210 <IRQ> [<c1042c9a>] ? run_ksoftirqd+0x8a/0x1c0 [<c1042c10>] ? run_ksoftirqd+0x0/0x1c0 [<c105ac24>] ? kthread+0x74/0x80 [<c105abb0>] ? kthread+0x0/0x80 [<c100337a>] ? kernel_thread_helper+0x6/0x10 ---[ end trace efd9a11434f0082e ]--- ------------[ cut here ]------------ WARNING: at /home/johan/src/linux/linux-2.6/lib/list_debug.c:57 list_del+0x10c/0x120() Hardware name: Vostro 1520 list_del corruption. next->prev should be f57fbd50, but was f57fbdb0 Modules linked in: cdc_acm Pid: 3, comm: ksoftirqd/0 Tainted: G W 2.6.37+ #39 Call Trace: [<c103c7e2>] warn_slowpath_common+0x72/0xa0 [<c11dd8ac>] ? list_del+0x10c/0x120 [<c11dd8ac>] ? list_del+0x10c/0x120 [<c103c8b3>] warn_slowpath_fmt+0x33/0x40 [<c11dd8ac>] list_del+0x10c/0x120 [<f8051dd6>] acm_rx_tasklet+0x106/0x3e0 [cdc_acm] [<c135465d>] ? net_rps_action_and_irq_enable+0x6d/0x80 [<c1042bb6>] tasklet_action+0xe6/0x140 [<c104342f>] __do_softirq+0xaf/0x210 [<c1043380>] ? __do_softirq+0x0/0x210 <IRQ> [<c1042c9a>] ? run_ksoftirqd+0x8a/0x1c0 [<c1042c10>] ? run_ksoftirqd+0x0/0x1c0 [<c105ac24>] ? kthread+0x74/0x80 [<c105abb0>] ? kthread+0x0/0x80 [<c100337a>] ? kernel_thread_helper+0x6/0x10 ---[ end trace efd9a11434f0082f ]--- cdc-acm.c: acm_rx_tasklet: sending urb 0xf50da300, rcv 0xf57fbc10, buf 0xf57fbd50 cdc-acm.c: disconnected from network cdc-acm.c: acm_rx_tasklet: sending urb 0xf50da380, rcv 0xf57fbbfc, buf 0xf57fbd3c cdc-acm.c: Entering acm_rx_tasklet ------------[ cut here ]------------ WARNING: at /home/johan/src/linux/linux-2.6/lib/list_debug.c:48 list_del+0xd5/0x120() Hardware name: Vostro 1520 list_del corruption, next is LIST_POISON1 (00100100) Modules linked in: cdc_acm Pid: 3, comm: ksoftirqd/0 Tainted: G W 2.6.37+ #39 Call Trace: [<c103c7e2>] warn_slowpath_common+0x72/0xa0 [<c11dd875>] ? list_del+0xd5/0x120 [<c11dd875>] ? list_del+0xd5/0x120 [<c103c8b3>] warn_slowpath_fmt+0x33/0x40 [<c11dd875>] list_del+0xd5/0x120 [<f8051fac>] acm_rx_tasklet+0x2dc/0x3e0 [cdc_acm] [<c106dbab>] ? trace_hardirqs_on+0xb/0x10 [<c1042b30>] ? tasklet_action+0x60/0x140 [<c1042bb6>] tasklet_action+0xe6/0x140 [<c104342f>] __do_softirq+0xaf/0x210 [<c1043380>] ? __do_softirq+0x0/0x210 <IRQ> [<c1042c9a>] ? run_ksoftirqd+0x8a/0x1c0 [<c1042c10>] ? run_ksoftirqd+0x0/0x1c0 [<c105ac24>] ? kthread+0x74/0x80 [<c105abb0>] ? kthread+0x0/0x80 [<c100337a>] ? kernel_thread_helper+0x6/0x10 ---[ end trace efd9a11434f00830 ]--- BUG: unable to handle kernel paging request at 00200200 IP: [<c11dd7bd>] list_del+0x1d/0x120 *pde = 00000000 Oops: 0000 [#1] PREEMPT SMP last sysfs file: /sys/devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/tty/ttyACM0/uevent Modules linked in: cdc_acm Pid: 3, comm: ksoftirqd/0 Tainted: G W 2.6.37+ #39 0T816J/Vostro 1520 EIP: 0060:[<c11dd7bd>] EFLAGS: 00010046 CPU: 0 EIP is at list_del+0x1d/0x120 EAX: f57fbd3c EBX: f57fb800 ECX: ffff8000 EDX: 00200200 ESI: f57fbe90 EDI: f57fbd3c EBP: f600bf54 ESP: f600bf3c DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 Process ksoftirqd/0 (pid: 3, ti=f600a000 task=f60791c0 task.ti=f6082000) Stack: c1527e84 00000030 c1527e54 00100100 f57fb800 f57fbd3c f600bf98 f8051fac f8053104 f8052b94 f600bf6c c106dbab f600bf80 00000286 f60791c0 c1042b30 f57fbda8 f57f5800 f57fbdb0 f57fbd80 f57fbe7c c1656b04 00000000 f600bfb0 Call Trace: [<f8051fac>] ? acm_rx_tasklet+0x2dc/0x3e0 [cdc_acm] [<c106dbab>] ? trace_hardirqs_on+0xb/0x10 [<c1042b30>] ? tasklet_action+0x60/0x140 [<c1042bb6>] ? tasklet_action+0xe6/0x140 [<c104342f>] ? __do_softirq+0xaf/0x210 [<c1043380>] ? __do_softirq+0x0/0x210 <IRQ> [<c1042c9a>] ? run_ksoftirqd+0x8a/0x1c0 [<c1042c10>] ? run_ksoftirqd+0x0/0x1c0 [<c105ac24>] ? kthread+0x74/0x80 [<c105abb0>] ? kthread+0x0/0x80 [<c100337a>] ? kernel_thread_helper+0x6/0x10 Code: ff 48 14 e9 57 ff ff ff 90 90 90 90 90 90 55 89 e5 83 ec 18 81 38 00 01 10 00 0f 84 9c 00 00 00 8b 50 04 81 fa 00 02 20 00 74 33 <8b> 12 39 d0 75 5c 8b 10 8b 4a 04 39 c8 0f 85 b5 00 00 00 8b 48 EIP: [<c11dd7bd>] list_del+0x1d/0x120 SS:ESP 0068:f600bf3c CR2: 0000000000200200 ---[ end trace efd9a11434f00831 ]--- Kernel panic - not syncing: Fatal exception in interrupt Pid: 3, comm: ksoftirqd/0 Tainted: G D W 2.6.37+ #39 Call Trace: [<c13fede1>] ? printk+0x1d/0x24 [<c13fecce>] panic+0x66/0x15c [<c10067df>] oops_end+0x8f/0x90 [<c1025476>] no_context+0xc6/0x160 [<c10255a8>] __bad_area_nosemaphore+0x98/0x140 [<c103cf68>] ? release_console_sem+0x1d8/0x210 [<c1025667>] bad_area_nosemaphore+0x17/0x20 [<c1025a49>] do_page_fault+0x279/0x420 [<c1006a8f>] ? show_trace+0x1f/0x30 [<c13fede1>] ? printk+0x1d/0x24 [<c10257d0>] ? do_page_fault+0x0/0x420 [<c140333b>] error_code+0x5f/0x64 [<c103007b>] ? select_task_rq_fair+0x37b/0x6a0 [<c10257d0>] ? do_page_fault+0x0/0x420 [<c11dd7bd>] ? list_del+0x1d/0x120 [<f8051fac>] acm_rx_tasklet+0x2dc/0x3e0 [cdc_acm] [<c106dbab>] ? trace_hardirqs_on+0xb/0x10 [<c1042b30>] ? tasklet_action+0x60/0x140 [<c1042bb6>] tasklet_action+0xe6/0x140 [<c104342f>] __do_softirq+0xaf/0x210 [<c1043380>] ? __do_softirq+0x0/0x210 <IRQ> [<c1042c9a>] ? run_ksoftirqd+0x8a/0x1c0 [<c1042c10>] ? run_ksoftirqd+0x0/0x1c0 [<c105ac24>] ? kthread+0x74/0x80 [<c105abb0>] ? kthread+0x0/0x80 [<c100337a>] ? kernel_thread_helper+0x6/0x10 panic occurred, switching back to text console ------------[ cut here ]------------ Cc: stable <stable@kernel.org> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-23USB: Fix 'bad dma' problem on WDM device disconnectRobert Lukassen1-1/+1
In the WDM class driver a disconnect event leads to calls to usb_free_coherent to put back two USB DMA buffers allocated earlier. The call to usb_free_coherent uses a different size parameter (desc->wMaxCommand) than the corresponding call to usb_alloc_coherent (desc->bMaxPacketSize0). When a disconnect event occurs, this leads to 'bad dma' complaints from usb core because the USB DMA buffer is being pushed back to the 'buffer-2048' pool from which it has not been allocated. This patch against the most recent linux-2.6 kernel ensures that the parameters used by usb_alloc_coherent & usb_free_coherent calls in cdc-wdm.c match. Signed-off-by: Robert Lukassen <robert.lukassen@tomtom.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-23usb: wwan: fix compilation without CONFIG_PM_RUNTIMEOliver Neukum1-2/+1
The pm usage counter must be accessed with the proper wrappers to allow compilation under all configurations. Signed-off-by: Oliver Neukum <oneukum@suse.de> Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Reported-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-23USB: uss720 fixup refcount positionPeter Holik1-4/+3
My testprog do a lot of bitbang - after hours i got following warning and my machine lockups: WARNING: at /build/buildd/linux-2.6.38/lib/kref.c:34 After debugging uss720 driver i discovered that the completion callback was called before usb_submit_urb returns. The callback frees the request structure that is krefed on return by usb_submit_urb. Signed-off-by: Peter Holik <peter@holik.at> Acked-by: Thomas Sailer <t.sailer@alumni.ethz.ch> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-23usb: musb: blackfin: fix typo in new bfin_musb_vbus_status funcMike Frysinger1-1/+1
The common code has a "get" in the middle, but each implementation does not have it. Cc: stable@kernel.org Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-23usb: musb: blackfin: fix typo in new dev_pm_ops structBob Liu1-1/+1
Cc: stable@kernel.org Signed-off-by: Bob Liu <lliubbo@gmail.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-23usb: musb: blackfin: fix typo in platform driver nameMike Frysinger1-1/+1
The modularization of the Blackfin driver set the name to "musb-blackfin" in all the boards, but "musb-bfin" in the driver itself. Since the driver file name uses "blackfin", change the driver to "musb-blackfin". This is also easier as it's only one file to change. Cc: stable@kernel.org Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-23usb: musb: Fix for merge issueHema HK1-4/+4
There was conflict while merging 2 patches. Enabling vbus code is wrongly moved to error check if loop. This is a fix to resolve the merge issue. Signed-off-by: Hema HK <hemahk@ti.com> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-23ehci-hcd: Bug fix: don't set a QH's Halt bitAlan Stern1-12/+0
This patch (as1453) fixes a long-standing bug in the ehci-hcd driver. There is no need to set the Halt bit in the overlay region for an unlinked or blocked QH. Contrary to what the comment says, setting the Halt bit does not cause the QH to be patched later; that decision (made in qh_refresh()) depends only on whether the QH is currently pointing to a valid qTD. Likewise, setting the Halt bit does not prevent completions from activating the QH while it is "stopped"; they are prevented by the fact that qh_completions() temporarily changes qh->qh_state to QH_STATE_COMPLETING. On the other hand, there are circumstances in which the QH will be reactivated _without_ being patched; this happens after an URB beyond the head of the queue is unlinked. Setting the Halt bit will then cause the hardware to see the QH with both the Active and Halt bits set, an invalid combination that will prevent the queue from advancing and may even crash some controllers. Apparently the only reason this hasn't been reported before is that unlinking URBs from the middle of a running queue is quite uncommon. However Test 17, recently added to the usbtest driver, does exactly this, and it confirms the presence of the bug. In short, there is no reason to set the Halt bit for an unlinked or blocked QH, and there is a very good reason not to set it. Therefore the code that sets it is removed. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Andiry Xu <andiry.xu@amd.com> CC: David Brownell <david-b@pacbell.net> CC: <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-23USB: Do not pass negative length to snoop_urb()Michal Sojka1-1/+1
When `echo Y > /sys/module/usbcore/parameters/usbfs_snoop` and usb_control_msg() returns error, a lot of kernel memory is dumped to dmesg until unhandled kernel paging request occurs. Signed-off-by: Michal Sojka <sojkam1@fel.cvut.cz> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-23Merge branch 'next' of ↵Linus Torvalds12-1242/+1902
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: (66 commits) avr32: at32ap700x: fix typo in DMA master configuration dmaengine/dmatest: Pass timeout via module params dma: let IMX_DMA depend on IMX_HAVE_DMA_V1 instead of an explicit list of SoCs fsldma: make halt behave nicely on all supported controllers fsldma: reduce locking during descriptor cleanup fsldma: support async_tx dependencies and automatic unmapping fsldma: fix controller lockups fsldma: minor codingstyle and consistency fixes fsldma: improve link descriptor debugging fsldma: use channel name in printk output fsldma: move related helper functions near each other dmatest: fix automatic buffer unmap type drivers, pch_dma: Fix warning when CONFIG_PM=n. dmaengine/dw_dmac fix: use readl & writel instead of __raw_readl & __raw_writel avr32: at32ap700x: Specify DMA Flow Controller, Src and Dst msize dw_dmac: Setting Default Burst length for transfers as 16. dw_dmac: Allow src/dst msize & flow controller to be configured at runtime dw_dmac: Changing type of src_master and dest_master to u8. dw_dmac: Pass Channel Priority from platform_data dw_dmac: Pass Channel Allocation Order from platform_data ...
2011-03-23zlib: slim down zlib_deflate() workspace when possibleJim Keniston1-1/+1
Instead of always creating a huge (268K) deflate_workspace with the maximum compression parameters (windowBits=15, memLevel=8), allow the caller to obtain a smaller workspace by specifying smaller parameter values. For example, when capturing oops and panic reports to a medium with limited capacity, such as NVRAM, compression may be the only way to capture the whole report. In this case, a small workspace (24K works fine) is a win, whether you allocate the workspace when you need it (i.e., during an oops or panic) or at boot time. I've verified that this patch works with all accepted values of windowBits (positive and negative), memLevel, and compression level. Signed-off-by: Jim Keniston <jkenisto@us.ibm.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David Miller <davem@davemloft.net> Cc: Chris Mason <chris.mason@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-23pps: remove unreachable codeAlexander Gordeev1-5/+0
Remove code enabled only when CONFIG_PREEMPT_RT is turned on because it is not used in the vanilla kernel. Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su> Cc: john stultz <johnstul@us.ibm.com> Cc: Rodolfo Giometti <giometti@linux.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-23pnp: only assign IORESOURCE_DMA if CONFIG_ISA_DMA_API is enabledDavid Rientjes3-6/+10
IORESOURCE_DMA cannot be assigned without utilizing the interface provided by CONFIG_ISA_DMA_API, specifically request_dma() and free_dma(). Thus, there's a strict dependency on the config option and limits IORESOURCE_DMA only to architectures that support ISA-style DMA. ia64 is not one of those architectures, so pnp_check_dma() no longer needs to be special-cased for that architecture. pnp_assign_resources() will now return -EINVAL if IORESOURCE_DMA is attempted on such a kernel. Signed-off-by: David Rientjes <rientjes@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-23rtc: add real-time clock driver for NVIDIA TegraAndrew Chew3-0/+499
This is a platform driver that supports the built-in real-time clock on Tegra SOCs. Signed-off-by: Andrew Chew <achew@nvidia.com> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Acked-by: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Jon Mayo <jmayo@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-23drivers/rtc/rtc-ds1511.c: world-writable sysfs nvram fileVasiliy Kulikov1-1/+1
Don't allow everybogy to write to NVRAM. Signed-off-by: Vasiliy Kulikov <segoon@openwall.com> Cc: Andy Sharp <andy.sharp@onstor.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-23drivers/rtc/rtc-isl1208.c: add alarm supportRyan Mallon1-5/+171
Add alarm/wakeup support to rtc isl1208 driver Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-23rtc: convert DS1374 to dev_pm_opsMark Brown1-6/+13
There is a general move to replace bus-specific PM ops with dev_pm_ops in order to facilitate core improvements. Do this conversion for DS1374. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: john stultz <johnstul@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-23drivers/mmc/host/omap_hsmmc.c: use resource_size()Chris Ball1-4/+3
Use resource_size(). Signed-off-by: Chris Ball <cjb@laptop.org> Cc: Madhusudhan Chikkature <madhu.cr@ti.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-23drivers/mmc/host/omap.c: use resource_size()Chris Ball1-3/+3
Signed-off-by: Chris Ball <cjb@laptop.org> Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com> Cc: Tony Lindgren <tony@atomide.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-23sigma-firmware: loader for Analog Devices' SigmaStudioMike Frysinger3-0/+128
Analog Devices' SigmaStudio can produce firmware blobs for devices with these DSPs embedded (like some audio codecs). Allow these device drivers to easily parse and load them. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-23kstrto*: converting strings to integers done (hopefully) rightAlexey Dobriyan1-3/+0
1. simple_strto*() do not contain overflow checks and crufty, libc way to indicate failure. 2. strict_strto*() also do not have overflow checks but the name and comments pretend they do. 3. Both families have only "long long" and "long" variants, but users want strtou8() 4. Both "simple" and "strict" prefixes are wrong: Simple doesn't exactly say what's so simple, strict should not exist because conversion should be strict by default. The solution is to use "k" prefix and add convertors for more types. Enter kstrtoull() kstrtoll() kstrtoul() kstrtol() kstrtouint() kstrtoint() kstrtou64() kstrtos64() kstrtou32() kstrtos32() kstrtou16() kstrtos16() kstrtou8() kstrtos8() Include runtime testsuite (somewhat incomplete) as well. strict_strto*() become deprecated, stubbed to kstrto*() and eventually will be removed altogether. Use kstrto*() in code today! Note: on some archs _kstrtoul() and _kstrtol() are left in tree, even if they'll be unused at runtime. This is temporarily solution, because I don't want to hardcode list of archs where these functions aren't needed. Current solution with sizeof() and __alignof__ at least always works. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-23drivers/dca/dca-core.c: use list_move() instead of list_del()/list_add() ↵Kirill A. Shutemov1-4/+2
combination Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name> Cc: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-23drivers/misc/pch_phub.c: add MODULE_DEVICE_TABLEAxel Lin1-0/+1
The device table is required to load modules based on modaliases. Signed-off-by: Axel Lin <axel.lin@gmail.com> Cc: Masayuki Ohtak <masa-korg@dsn.okisemi.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-23drivers/misc/ep93xx_pwm.c: world-writable sysfs filesVasiliy Kulikov1-3/+3
Don't allow everybody to change device settings. Signed-off-by: Vasiliy Kulikov <segoon@openwall.com> Acked-by: Hartley Sweeten <hartleys@visionengravers.com> Cc: Matthieu Crapet <mcrapet@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-23drivers/misc/atmel_tclib.c: fix a memory leakAxel Lin1-2/+2
request_mem_region() will call kzalloc to allocate memory for struct resource. release_resource() unregisters the resource but does not free the allocated memory, thus use release_mem_region() instead to fix the memory leak. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-23drivers/misc/hmc6352.c: fix wrong return value checking for i2c_master_recv()Axel Lin1-2/+2
i2c_master_recv() returns negative errno, or else the number of bytes read. Thus i2c_master_recv(client, i2c_data, 2) returns 2 instead of 1 in success case. [akpm@linux-foundation.org: make `ret' signed] Signed-off-by: Axel Lin <axel.lin@gmail.com> Cc: Kalhan Trisal <kalhan.trisal@intel.com> Cc: Alan Cox <alan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-23drivers/misc/apds9802als.c: put the device into runtime suspend after ↵Hong Liu1-7/+10
resume()/probe() is handled Put the device into runtime suspend after resume()/probe() is handled by the PM core and the device core code. No need to manually add them in each single driver. And correct the runtime state in remove(). Signed-off-by: Hong Liu <hong.liu@intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-23ST SPEAr: PCIE gadget suppportPratyush Anand3-0/+919
This is a configurable gadget. can be configured by configfs interface. Any IP available at PCIE bus can be programmed to be used by host controller.It supoorts both INTX and MSI. By default, the gadget is configured for INTX and SYSRAM1 is mapped to BAR0 with size 0x1000 Signed-off-by: Pratyush Anand <pratyush.anand@st.com> Cc: Randy Dunlap <randy.dunlap@oracle.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Viresh Kumar <viresh.kumar@st.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-23drivers/misc/bmp085.c: free initmem memoryShubhrajyoti Datta1-3/+3
Free the memory that is used only at init Signed-off-by: Shubhrajyoti Datta <shubhrajyoti@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-23bh1780gli: convert to dev pm opsShubhrajyoti Datta1-9/+10
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-23pwm_backlight: add check_fb() hookRobert Morell1-0/+11
In systems with multiple framebuffer devices, one of the devices might be blanked while another is unblanked. In order for the backlight blanking logic to know whether to turn off the backlight for a particular framebuffer's blanking notification, it needs to be able to check if a given framebuffer device corresponds to the backlight. This plumbs the check_fb hook from core backlight through the pwm_backlight helper to allow platform code to plug in a check_fb hook. Signed-off-by: Robert Morell <rmorell@nvidia.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Arun Murthy <arun.murthy@stericsson.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-23drivers/video/backlight/jornada720_*.c: make needlessly global symbols staticAxel Lin2-4/+4
The following symbols are needlessly defined global: jornada_bl_init, jornada_bl_exit, jornada_lcd_init, jornada_lcd_exit. Make them static. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Kristoffer Ericson <kristoffer.ericson@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-23backlight: apple_bl depends on ACPIRandy Dunlap1-2/+2
apple_bl uses ACPI interfaces (data & code), so it should depend on ACPI. drivers/video/backlight/apple_bl.c:142: warning: 'struct acpi_device' declared inside parameter list drivers/video/backlight/apple_bl.c:142: warning: its scope is only this definition or declaration, which is probably not what you want drivers/video/backlight/apple_bl.c:201: warning: 'struct acpi_device' declared inside parameter list drivers/video/backlight/apple_bl.c:215: error: variable 'apple_bl_driver' has initializer but incomplete type drivers/video/backlight/apple_bl.c:216: error: unknown field 'name' specified in initializer ... Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Matthew Garrett <mjg@redhat.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-23mbp_nvidia_bl: rename to apple_blMatthew Garrett3-34/+35
It works on hardware other than Macbook Pros, and it works on GPUs other than Nvidia. It should even work on iMacs, so change the name to match reality more precisely and include an alias so existing users don't get confused. Signed-off-by: Matthew Garrett <mjg@redhat.com> Acked-by: Richard Purdie <richard.purdie@linuxfoundation.org> Cc: Mourad De Clerck <mourad@aquazul.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-23mbp_nvidia_bl: check that the backlight control functionsMatthew Garrett1-0/+13
The SMI-based backlight control functionality may fail to work if the system is running under EFI rather than BIOS. Check that the hardware responds as expected, and exit if it doesn't. Signed-off-by: Matthew Garrett <mjg@redhat.com> Acked-by: Richard Purdie <richard.purdie@linuxfoundation.org> Cc: Mourad De Clerck <mourad@aquazul.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-23mbp_nvidia_bl: remove DMI dependencyMatthew Garrett3-275/+101
This driver only has to deal with two different classes of hardware, but right now it needs new DMI entries for every new machine. It turns out that there's an ACPI device that uniquely identifies Apples with backlights, so this patch reworks the driver into an ACPI one, identifies the hardware by checking the PCI vendor of the root bridge and strips out all the DMI code. It also changes the config text to clarify that it works on devices other than Macbook Pros and GPUs other than nvidia. Signed-off-by: Matthew Garrett <mjg@redhat.com> Acked-by: Richard Purdie <richard.purdie@linuxfoundation.org> Cc: Mourad De Clerck <mourad@aquazul.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-23acpi: tie ACPI backlight devices to PCI devices if possibleMatthew Garrett1-1/+14
Dual-GPU machines may provide more than one ACPI backlight interface. Tie the backlight device to the GPU in order to allow userspace to identify the correct interface. Signed-off-by: Matthew Garrett <mjg@redhat.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: David Airlie <airlied@linux.ie> Cc: Alex Deucher <alexdeucher@gmail.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Len Brown <lenb@kernel.org> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Tested-by: Sedat Dilek <sedat.dilek@googlemail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-23nouveau: change the backlight parent device to the connector, not the PCI devMatthew Garrett4-20/+27
We may eventually end up with per-connector backlights, especially with ddcci devices. Make sure that the parent node for the backlight device is the connector rather than the PCI device. Signed-off-by: Matthew Garrett <mjg@redhat.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: David Airlie <airlied@linux.ie> Cc: Alex Deucher <alexdeucher@gmail.com> Acked-by: Ben Skeggs <bskeggs@redhat.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Len Brown <lenb@kernel.org> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Tested-by: Sedat Dilek <sedat.dilek@googlemail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-23radeon: expose backlight class device for legacy LVDS encoderMichel Dänzer4-6/+273
Allows e.g. power management daemons to control the backlight level. Inspired by the corresponding code in radeonfb. [mjg@redhat.com: updated to add backlight type and make the connector the parent device] Signed-off-by: Michel Dänzer <michel@daenzer.net> Signed-off-by: Matthew Garrett <mjg@redhat.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: David Airlie <airlied@linux.ie> Acked-by: Alex Deucher <alexdeucher@gmail.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Len Brown <lenb@kernel.org> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Tested-by: Sedat Dilek <sedat.dilek@googlemail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-23backlight: add backlight typeMatthew Garrett57-2/+82
There may be multiple ways of controlling the backlight on a given machine. Allow drivers to expose the type of interface they are providing, making it possible for userspace to make appropriate policy decisions. Signed-off-by: Matthew Garrett <mjg@redhat.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: David Airlie <airlied@linux.ie> Cc: Alex Deucher <alexdeucher@gmail.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Len Brown <lenb@kernel.org> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-23drivers/leds/leds-lp5523.c: world-writable engine* sysfs filesVasiliy Kulikov1-10/+10
Don't allow everybody to change LED settings. Signed-off-by: Vasiliy Kulikov <segoon@openwall.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-23drivers/leds/leds-lp5521.c: world-writable sysfs engine* filesVasiliy Kulikov1-7/+7
Don't allow everybody to change LED settings. Signed-off-by: Vasiliy Kulikov <segoon@openwall.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-23drivers/vidfeo/backlight: ld9040 amoled driver supportDonghwa Lee4-0/+1028
Add a ld9040 amoled panel driver. Signed-off-by: Donghwa Lee <dh09.lee@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-23leds: make *struct gpio_led_platform_data.leds constUwe Kleine-König1-1/+1
And fix a typo. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-23leds: add driver for LM3530 ALSShreshtha Kumar Sahu3-0/+389
Simple backlight driver for National Semiconductor LM3530. Presently only manual mode is supported, PWM and ALS support to be added. Signed-off-by: Shreshtha Kumar Sahu <shreshthakumar.sahu@stericsson.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-23leds: convert bd2802 driver to dev_pm_opsMark Brown1-19/+28
There is a move to deprecate bus-specific PM operations and move to using dev_pm_ops instead in order to reduce the amount of boilerplate code in buses and facilitiate updates to the PM core. Do this move for the bs2802 driver. [akpm@linux-foundation.org: fix warnings] Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Kim Kyuwon <q1.kim@samsung.com> Cc: Kim Kyuwon <chammoru@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-clientLinus Torvalds1-26/+335
* git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: rbd: use watch/notify for changes in rbd header libceph: add lingering request and watch/notify event framework rbd: update email address in Documentation ceph: rename dentry_release -> d_release, fix comment ceph: add request to the tail of unsafe write list ceph: remove request from unsafe list if it is canceled/timed out ceph: move readahead default to fs/ceph from libceph ceph: add ino32 mount option ceph: update common header files ceph: remove debugfs debug cruft libceph: fix osd request queuing on osdmap updates ceph: preserve I_COMPLETE across rename libceph: Fix base64-decoding when input ends in newline.
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-26 03:46:31 +0300