summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2024-01-04tty: serial: kgdboc: Fix 8250_* kgdb over serialMichael Trimarchi1-1/+2
Check if port type is not PORT_UNKNOWN during poll_init. The kgdboc calls the tty_find_polling_driver that check if the serial is able to use poll_init. The poll_init calls the uart uart_poll_init that try to configure the uart with the selected boot parameters. The uart must be ready before setting parameters. Seems that PORT_UNKNOWN is already used by other functions in serial_core to detect uart status, so use the same to avoid to use it in invalid state. The crash happen for instance in am62x architecture where the 8250 register the platform driver after the 8250 core is initialized. Follow the report crash coming from KGDB Thread 2 received signal SIGSEGV, Segmentation fault. [Switching to Thread 1] _outb (addr=<optimized out>, value=<optimized out>) at ./include/asm-generic/io.h:584 584 __raw_writeb(value, PCI_IOBASE + addr); (gdb) bt This section of the code is too early because in this case the omap serial is not probed Thread 2 received signal SIGSEGV, Segmentation fault. [Switching to Thread 1] _outb (addr=<optimized out>, value=<optimized out>) at ./include/asm-generic/io.h:584 584 __raw_writeb(value, PCI_IOBASE + addr); (gdb) bt Thread 2 received signal SIGSEGV, Segmentation fault. [Switching to Thread 1] _outb (addr=<optimized out>, value=<optimized out>) at ./include/asm-generic/io.h:584 584 __raw_writeb(value, PCI_IOBASE + addr); (gdb) bt 0 _outb (addr=<optimized out>, value=<optimized out>) at ./include/asm-generic/io.h:584 1 logic_outb (value=0 '\000', addr=18446739675637874689) at lib/logic_pio.c:299 2 0xffff80008082dfcc in io_serial_out (p=0x0, offset=16760830, value=0) at drivers/tty/serial/8250/8250_port.c:416 3 0xffff80008082fe34 in serial_port_out (value=<optimized out>, offset=<optimized out>, up=<optimized out>) at ./include/linux/serial_core.h:677 4 serial8250_do_set_termios (port=0xffff8000828ee940 <serial8250_ports+1568>, termios=0xffff80008292b93c, old=0x0) at drivers/tty/serial/8250/8250_port.c:2860 5 0xffff800080830064 in serial8250_set_termios (port=0xfffffbfffe800000, termios=0xffbffe, old=0x0) at drivers/tty/serial/8250/8250_port.c:2912 6 0xffff80008082571c in uart_set_options (port=0xffff8000828ee940 <serial8250_ports+1568>, co=0x0, baud=115200, parity=110, bits=8, flow=110) at drivers/tty/serial/serial_core.c:2285 7 0xffff800080828434 in uart_poll_init (driver=0xfffffbfffe800000, line=16760830, options=0xffff8000828f7506 <config+6> "115200n8") at drivers/tty/serial/serial_core.c:2656 8 0xffff800080801690 in tty_find_polling_driver (name=0xffff8000828f7500 <config> "ttyS2,115200n8", line=0xffff80008292ba90) at drivers/tty/tty_io.c:410 9 0xffff80008086c0b0 in configure_kgdboc () at drivers/tty/serial/kgdboc.c:194 10 0xffff80008086c1ec in kgdboc_probe (pdev=0xfffffbfffe800000) at drivers/tty/serial/kgdboc.c:249 11 0xffff8000808b399c in platform_probe (_dev=0xffff000000ebb810) at drivers/base/platform.c:1404 12 0xffff8000808b0b44 in call_driver_probe (drv=<optimized out>, dev=<optimized out>) at drivers/base/dd.c:579 13 really_probe (dev=0xffff000000ebb810, drv=0xffff80008277f138 <kgdboc_platform_driver+48>) at drivers/base/dd.c:658 14 0xffff8000808b0d2c in __driver_probe_device (drv=0xffff80008277f138 <kgdboc_platform_driver+48>, dev=0xffff000000ebb810) at drivers/base/dd.c:800 15 0xffff8000808b0eb8 in driver_probe_device (drv=0xfffffbfffe800000, dev=0xffff000000ebb810) at drivers/base/dd.c:830 16 0xffff8000808b0ff4 in __device_attach_driver (drv=0xffff80008277f138 <kgdboc_platform_driver+48>, _data=0xffff80008292bc48) at drivers/base/dd.c:958 17 0xffff8000808ae970 in bus_for_each_drv (bus=0xfffffbfffe800000, start=0x0, data=0xffff80008292bc48, fn=0xffff8000808b0f3c <__device_attach_driver>) at drivers/base/bus.c:457 18 0xffff8000808b1408 in __device_attach (dev=0xffff000000ebb810, allow_async=true) at drivers/base/dd.c:1030 19 0xffff8000808b16d8 in device_initial_probe (dev=0xfffffbfffe800000) at drivers/base/dd.c:1079 20 0xffff8000808af9f4 in bus_probe_device (dev=0xffff000000ebb810) at drivers/base/bus.c:532 21 0xffff8000808ac77c in device_add (dev=0xfffffbfffe800000) at drivers/base/core.c:3625 22 0xffff8000808b3428 in platform_device_add (pdev=0xffff000000ebb800) at drivers/base/platform.c:716 23 0xffff800081b5dc0c in init_kgdboc () at drivers/tty/serial/kgdboc.c:292 24 0xffff800080014db0 in do_one_initcall (fn=0xffff800081b5dba4 <init_kgdboc>) at init/main.c:1236 25 0xffff800081b0114c in do_initcall_level (command_line=<optimized out>, level=<optimized out>) at init/main.c:1298 26 do_initcalls () at init/main.c:1314 27 do_basic_setup () at init/main.c:1333 28 kernel_init_freeable () at init/main.c:1551 29 0xffff8000810271ec in kernel_init (unused=0xfffffbfffe800000) at init/main.c:1441 30 0xffff800080015e80 in ret_from_fork () at arch/arm64/kernel/entry.S:857 Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Link: https://lore.kernel.org/r/20231224131200.266224-1-michael@amarulasolutions.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04serial: imx: Correct clock error message in function probe()Christoph Niedermaier1-1/+1
Correct the clock error message by changing the clock name. Fixes: 1e512d45332b ("serial: imx: add error messages when .probe fails") Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20231224093209.2612-1-cniedermaier@dh-electronics.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04tty/serial: altera_uart: use more informative labels in /proc/interruptsAntony Pavlov1-1/+1
Prior to this patch: ~# cat /proc/interrupts ... 40: 123 0 GIC-0 72 Level altera_uart 41: 9 0 GIC-0 73 Level altera_uart After this patch: ~# cat /proc/interrupts ... 40: 6 0 GIC-0 72 Level ff200100.fpga-uart0 41: 28 0 GIC-0 73 Level ff200200.fpga-uart1 Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Acked-by: Tobias Klauser <tklauser@distanz.ch> Link: https://lore.kernel.org/r/20231217195601.236002-1-antonynpavlov@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04tty: serial: Add RS422 flag to struct serial_rs485Crescent CY Hsieh1-0/+6
Add "SER_RS485_MODE_RS422" flag to struct serial_rs485, so that serial port can switch interface into RS422 if supported by using ioctl command "TIOCSRS485". By treating RS422 as a mode of RS485, which means while enabling RS422 there are two flags need to be set (SER_RS485_ENABLED and SER_RS485_MODE_RS422), it would make things much easier. For example some places that checks for "SER_RS485_ENABLED" won't need to be rewritten. Signed-off-by: Crescent CY Hsieh <crescentcy.hsieh@moxa.com> Link: https://lore.kernel.org/r/20231201071554.258607-3-crescentcy.hsieh@moxa.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04serial: core: Clean up uart_update_timeout() functionVamshi Gajjela1-4/+3
Rename the variable size to temp and change its data type from unsigned int to u64 to avoid type casting in multiplication. Remove the intermediate variable frame_time and use temp instead to accommodate the nanoseconds(ns). port->frame_time is an unsigned int, therefore an explicit cast is used to improve readability. Having said this unsigned int is sufficinet to hold frame time duration in nanoseconds for all the standard baudrates. Consider 9600 baud, it takes 1/9600 seconds for one bit, for a total of 10 bits (start, 8-bit data, stop) 10/9600=1.04 ms for 1 byte transfer, frame_time here is 1041667ns. As baudrate increases frame_time decreases, say for 115200 baud it is 86806ns. To avoid costly 64-bit arithmetic we do not upconvert the type for variable frame_time as overflow happens for extremely low baudrates which are impractical and are not used in real-world applications. Signed-off-by: Vamshi Gajjela <vamshigajjela@google.com> Link: https://lore.kernel.org/r/20231109063417.3971005-3-vamshigajjela@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-15tty: serial: 8250: Set RS422 interface by default to fix Moxa RS422/RS485 ↵Crescent CY Hsieh1-1/+57
PCIe boards MOXA PCIe RS422/RS485 boards will not function by default because of the initial default serial interface of all MOXA PCIe boards is set to RS232. This patch fixes the problem above by setting the initial default serial interface to RS422 for those MOXA RS422/RS485 PCIe boards. Signed-off-by: Crescent CY Hsieh <crescentcy.hsieh@moxa.com> Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20231214060234.6147-1-crescentcy.hsieh@moxa.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-15tty: serial: amba-pl011: factor QDF2400 SoC erratum 44 out of probeThéo Lebrun1-7/+18
On this platform, different vendor data is used. That requires a compile-time check as we access (1) a global boolean & (2) our local vendor data. Both symbols are accessible only when CONFIG_ACPI_SPCR_TABLE is enabled. Factor the vendor data overriding to a separate function that is empty when CONFIG_ACPI_SPCR_TABLE is not defined. Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com> Link: https://lore.kernel.org/r/20231207-mbly-uart-v6-8-e384afa5e78c@bootlin.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-15tty: serial: amba-pl011: unindent pl011_console_get_options function bodyThéo Lebrun1-22/+21
The whole function body is encapsulated inside an if-condition. Reverse the if logic and early return to remove one indentation level. Also turn two nested ifs into a single one at the end of the function. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com> Link: https://lore.kernel.org/r/20231207-mbly-uart-v6-7-e384afa5e78c@bootlin.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-15tty: serial: amba-pl011: fix miscellaneous checkpatch warningsThéo Lebrun1-7/+6
Fix the following messages from checkpatch: $ ./scripts/checkpatch.pl --strict --file \ drivers/tty/serial/amba-pl011.c ERROR: do not initialise statics to false WARNING: Possible unnecessary 'out of memory' message WARNING: Prefer 'unsigned int' to bare use of 'unsigned' WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to CHECK: Prefer using the BIT macro Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com> Link: https://lore.kernel.org/r/20231207-mbly-uart-v6-6-e384afa5e78c@bootlin.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-15tty: serial: amba-pl011: fix formatting of conditionsThéo Lebrun1-12/+14
Fix the following checkpatch warnings & checks: $ ./scripts/checkpatch.pl --strict --file \ drivers/tty/serial/amba-pl011.c CHECK: Unbalanced braces around else statement CHECK: Unnecessary parentheses around '[...]' CHECK: braces {} should be used on all arms of this statement CHECK: Comparison to NULL could be written "[...]" WARNING: Comparisons should place the constant on the right side of the test Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com> Link: https://lore.kernel.org/r/20231207-mbly-uart-v6-5-e384afa5e78c@bootlin.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-15tty: serial: amba-pl011: avoid quoted string split across linesThéo Lebrun1-8/+8
Remove all instances of quoted strings split across lines. Fix four checkpatch warnings: $ ./scripts/checkpatch.pl --strict --file \ drivers/tty/serial/amba-pl011.c WARNING: quoted string split across lines [...] Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com> Link: https://lore.kernel.org/r/20231207-mbly-uart-v6-4-e384afa5e78c@bootlin.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-15tty: serial: amba-pl011: replace TIOCMBIT macros by static functionsThéo Lebrun1-21/+24
The driver uses two TIOCMBIT macros inside pl011_{get,set}_mctrl to simplify the logic. Those look scary to checkpatch because they contain ifs without do-while loops. Avoid the macros by creating small equivalent static functions; that lets the compiler do its type checking & avoids checkpatch errors. For the second instance __assign_bit is not usable because it deals with unsigned long pointers whereas we have an unsigned int in pl011_set_mctrl. This addresses the following checkpatch warnings: $ ./scripts/checkpatch.pl --strict --file \ drivers/tty/serial/amba-pl011.c ERROR: Macros starting with if should be enclosed by a do - while loop to avoid possible if/else logic defects CHECK: Macro argument 'uartbit' may be better as '(uartbit)' to avoid precedence issues ERROR: Macros starting with if should be enclosed by a do - while loop to avoid possible if/else logic defects CHECK: Macro argument 'tiocmbit' may be better as '(tiocmbit)' to avoid precedence issues Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com> Link: https://lore.kernel.org/r/20231207-mbly-uart-v6-3-e384afa5e78c@bootlin.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-15tty: serial: amba-pl011: fix whitespace formattingThéo Lebrun1-52/+45
Follow recommandations from: $ ./scripts/checkpatch.pl --strict --file \ drivers/tty/serial/amba-pl011.c We fix 5 warnings and 48 checks, all related to whitespace. Culprits are: CHECK: Alignment should match open parenthesis CHECK: Blank lines aren't necessary after an open brace '{' CHECK: Lines should not end with a '(' CHECK: Please don't use multiple blank lines CHECK: Please use a blank line after function/struct/union/enum declarations CHECK: spaces preferred around that '/' (ctx:VxV) CHECK: spaces preferred around that '|' (ctx:VxV) WARNING: Missing a blank line after declarations WARNING: please, no spaces at the start of a line Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com> Link: https://lore.kernel.org/r/20231207-mbly-uart-v6-2-e384afa5e78c@bootlin.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-15serial: 8250-fsl: Only do the break workaround if IIR signals RLSIUwe Kleine-König1-1/+2
It can happen that while a break is received the transmitter gets empty and IIR signals a Transmitter holding register empty (THRI) event. In this case it's too early for the break workaround. Still doing it then results in the THRI event not being rereported which makes the driver miss that and e.g. for RS485 half-duplex communication it fails to switch back to RX mode. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20231213174312.2341013-1-u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-15serial: ma35d1: Fix spelling mistake "ononsole" -> "console"Colin Ian King1-1/+1
There is a spelling mistake in a pr_warn message. Fix it. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Link: https://lore.kernel.org/r/20231208102331.3267192-1-colin.i.king@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-15serial: sc16is7xx: fix unconditional activation of THRI interruptHugo Villeneuve1-5/+2
Commit cc4c1d05eb10 ("sc16is7xx: Properly resume TX after stop") changed behavior to unconditionnaly set the THRI interrupt in sc16is7xx_tx_proc(). For example when sending a 65 bytes message, and assuming the Tx FIFO is initially empty, sc16is7xx_handle_tx() will write the first 64 bytes of the message to the FIFO and sc16is7xx_tx_proc() will then activate THRI. When the THRI IRQ is fired, the driver will write the remaining byte of the message to the FIFO, and disable THRI by calling sc16is7xx_stop_tx(). When sending a 2 bytes message, sc16is7xx_handle_tx() will write the 2 bytes of the message to the FIFO and call sc16is7xx_stop_tx(), disabling THRI. After sc16is7xx_handle_tx() exits, control returns to sc16is7xx_tx_proc() which will unconditionally set THRI. When the THRI IRQ is fired, the driver simply acknowledges the interrupt and does nothing more, since all the data has already been written to the FIFO. This results in 2 register writes and 4 register reads all for nothing and taking precious cycles from the I2C/SPI bus. Fix this by enabling the THRI interrupt only when we fill the Tx FIFO to its maximum capacity and there are remaining bytes to send in the message. Fixes: cc4c1d05eb10 ("sc16is7xx: Properly resume TX after stop") Cc: <stable@vger.kernel.org> Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Link: https://lore.kernel.org/r/20231211171353.2901416-7-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-15serial: sc16is7xx: convert from _raw_ to _noinc_ regmap functions for FIFOHugo Villeneuve1-6/+11
The SC16IS7XX IC supports a burst mode to access the FIFOs where the initial register address is sent ($00), followed by all the FIFO data without having to resend the register address each time. In this mode, the IC doesn't increment the register address for each R/W byte. The regmap_raw_read() and regmap_raw_write() are functions which can perform IO over multiple registers. They are currently used to read/write from/to the FIFO, and although they operate correctly in this burst mode on the SPI bus, they would corrupt the regmap cache if it was not disabled manually. The reason is that when the R/W size is more than 1 byte, these functions assume that the register address is incremented and handle the cache accordingly. Convert FIFO R/W functions to use the regmap _noinc_ versions in order to remove the manual cache control which was a workaround when using the _raw_ versions. FIFO registers are properly declared as volatile so cache will not be used/updated for FIFO accesses. Fixes: dfeae619d781 ("serial: sc16is7xx") Cc: <stable@vger.kernel.org> Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Link: https://lore.kernel.org/r/20231211171353.2901416-6-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-15serial: sc16is7xx: change EFR lock to operate on each channelsHugo Villeneuve1-23/+26
Now that the driver has been converted to use one regmap per port, change efr locking to operate on a channel basis instead of on the whole IC. Fixes: 3837a0379533 ("serial: sc16is7xx: improve regmap debugfs by using one regmap per port") Cc: <stable@vger.kernel.org> # 6.1.x: 3837a03 serial: sc16is7xx: improve regmap debugfs by using one regmap per port Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Link: https://lore.kernel.org/r/20231211171353.2901416-5-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-15serial: sc16is7xx: remove unused line structure memberHugo Villeneuve1-2/+0
Now that the driver has been converted to use one regmap per port, the line structure member is no longer used, so remove it. Fixes: 3837a0379533 ("serial: sc16is7xx: improve regmap debugfs by using one regmap per port") Cc: <stable@vger.kernel.org> Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Link: https://lore.kernel.org/r/20231211171353.2901416-4-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-15serial: sc16is7xx: remove global regmap from struct sc16is7xx_portHugo Villeneuve1-6/+9
Remove global struct regmap so that it is more obvious that this regmap is to be used only in the probe function. Also add a comment to that effect in probe function. Fixes: 3837a0379533 ("serial: sc16is7xx: improve regmap debugfs by using one regmap per port") Cc: <stable@vger.kernel.org> Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Link: https://lore.kernel.org/r/20231211171353.2901416-3-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-15serial: sc16is7xx: remove wasteful static buffer in sc16is7xx_regmap_name()Hugo Villeneuve1-6/+8
Using a static buffer inside sc16is7xx_regmap_name() was a convenient and simple way to set the regmap name without having to allocate and free a buffer each time it is called. The drawback is that the static buffer wastes memory for nothing once regmap is fully initialized. Remove static buffer and use constant strings instead. This also avoids a truncation warning when using "%d" or "%u" in snprintf which was flagged by kernel test robot. Fixes: 3837a0379533 ("serial: sc16is7xx: improve regmap debugfs by using one regmap per port") Cc: <stable@vger.kernel.org> # 6.1.x: 3837a03 serial: sc16is7xx: improve regmap debugfs by using one regmap per port Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Link: https://lore.kernel.org/r/20231211171353.2901416-2-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-15serdev: Remove usage of the deprecated ida_simple_xx() APIChristophe JAILLET1-2/+2
ida_alloc() and ida_free() should be preferred to the deprecated ida_simple_get() and ida_simple_remove(). This is less verbose. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/d20d3ac106bac6b7cabe39f22ad00ac86910e0a5.1702230342.git.christophe.jaillet@wanadoo.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-15tty: allow TIOCSLCKTRMIOS with CAP_CHECKPOINT_RESTOREAdrian Reber1-2/+2
The capability CAP_CHECKPOINT_RESTORE was introduced to allow non-root users to checkpoint and restore processes as non-root with CRIU. This change extends CAP_CHECKPOINT_RESTORE to enable the CRIU option '--shell-job' as non-root. CRIU's man-page describes the '--shell-job' option like this: Allow one to dump shell jobs. This implies the restored task will inherit session and process group ID from the criu itself. This option also allows to migrate a single external tty connection, to migrate applications like top. TIOCSLCKTRMIOS can only be done if the process has CAP_SYS_ADMIN and this change extends it to CAP_SYS_ADMIN or CAP_CHECKPOINT_RESTORE. With this change it is possible to checkpoint and restore processes which have a tty connection as non-root if CAP_CHECKPOINT_RESTORE is set. Acked-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Adrian Reber <areber@redhat.com> Acked-by: Andrei Vagin <avagin@gmail.com> Link: https://lore.kernel.org/r/20231208143656.1019-1-areber@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-15serial: esp32_uart: Use device_get_match_data()Rob Herring1-7/+3
Use preferred device_get_match_data() instead of of_match_device() to get the driver match data. With this, adjust the includes to explicitly include the correct headers. Error checking for matching was not necessary as matching is always successful if we're already in probe and the match tables always have data pointers. Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20231207162632.2650356-2-robh@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-15serial: esp32_acm: Add explicit platform_device.h includeRob Herring1-1/+1
The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it was merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other. They also include platform_device.h and of.h. Soon the implicit includes are going to be removed. Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20231207162632.2650356-1-robh@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-11Merge 6.7-rc5 into tty-nextGreg Kroah-Hartman389-4371/+4275
We need the serial fixes in here as well to build off of. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-10Merge tag 'gpio-fixes-for-v6.7-rc5' of ↵Linus Torvalds1-6/+9
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio fix from Bartosz Golaszewski: - fix an error path after a failed export in sysfs code * tag 'gpio-fixes-for-v6.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: gpiolib: sysfs: Fix error handling on failed export
2023-12-09Merge tag 'usb-6.7-rc5' of ↵Linus Torvalds4-9/+9
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some small USB fixes for 6.7-rc5 to resolve some reported issues. Included in here are: - usb gadget f_hid, and uevent fix - xhci driver revert to resolve a much-reported issue - typec driver fix All of these have been in linux-next with no reported issues" * tag 'usb-6.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: gadget: f_hid: fix report descriptor allocation Revert "xhci: Loosen RPM as default policy to cover for AMD xHC 1.1" usb: typec: class: fix typec_altmode_put_partner to put plugs USB: gadget: core: adjust uevent timing on gadget unbind
2023-12-09Merge tag 'tty-6.7-rc4' of ↵Linus Torvalds6-65/+85
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull serial driver fixes from Greg KH: "Here are some small serial driver fixes for 6.7-rc4 to resolve some reported issues. Included in here are: - pl011 dma support fix - sc16is7xx driver fix - ma35d1 console index fix - 8250 driver fixes for small issues All of these have been in linux-next with no reported issues" * tag 'tty-6.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: 8250_dw: Add ACPI ID for Granite Rapids-D UART serial: ma35d1: Validate console index before assignment ARM: PL011: Fix DMA support serial: sc16is7xx: address RX timeout interrupt errata serial: 8250: 8250_omap: Clear UART_HAS_RHR_IT_DIS bit serial: 8250_omap: Add earlycon support for the AM654 UART controller serial: 8250: 8250_omap: Do not start RX DMA on THRI interrupt
2023-12-09Merge tag 'char-misc-6.7-rc5' of ↵Linus Torvalds11-49/+77
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char / misc driver fixes from Greg KH: "Here are some small fixes for 6.7-rc5 for a variety of small driver subsystems. Included in here are: - debugfs revert for reported issue - greybus revert for reported issue - greybus fixup for endian build warning - coresight driver fixes - nvmem driver fixes - devcoredump fix - parport new device id - ndtest build fix All of these have ben in linux-next with no reported issues" * tag 'char-misc-6.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: nvmem: Do not expect fixed layouts to grab a layout driver parport: Add support for Brainboxes IX/UC/PX parallel cards Revert "greybus: gb-beagleplay: Ensure le for values in transport" greybus: gb-beagleplay: Ensure le for values in transport greybus: BeaglePlay driver needs CRC_CCITT Revert "debugfs: annotate debugfs handlers vs. removal with lockdep" devcoredump: Send uevent once devcd is ready ndtest: fix typo class_regster -> class_register misc: mei: client.c: fix problem of return '-EOVERFLOW' in mei_cl_write misc: mei: client.c: return negative error code in mei_cl_write mei: pxp: fix mei_pxp_send_message return value coresight: ultrasoc-smb: Fix uninitialized before use buf_hw_base coresight: ultrasoc-smb: Config SMB buffer before register sink coresight: ultrasoc-smb: Fix sleep while close preempt in enable_smb Documentation: coresight: fix `make refcheckdocs` warning hwtracing: hisi_ptt: Don't try to attach a task hwtracing: hisi_ptt: Handle the interrupt in hardirq context hwtracing: hisi_ptt: Add dummy callback pmu::read() coresight: Fix crash when Perf and sysfs modes are used concurrently coresight: etm4x: Remove bogous __exit annotation for some functions
2023-12-08Merge tag 'scsi-fixes' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fix from James Bottomley: "One tiny fix to the be2iscsi driver fixing a memory leak in an error leg" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: be2iscsi: Fix a memleak in beiscsi_init_wrb_handle()
2023-12-08Merge tag 'block-6.7-2023-12-08' of git://git.kernel.dk/linuxLinus Torvalds12-134/+197
Pull block fixes from Jens Axboe: "Nothing major in here, just miscellanous fixes for MD and NVMe: - NVMe pull request via Keith: - Proper nvme ctrl state setting (Keith) - Passthrough command optimization (Keith) - Spectre fix (Nitesh) - Kconfig clarifications (Shin'ichiro) - Frozen state deadlock fix (Bitao) - Power setting quirk (Georg) - MD pull requests via Song: - 6.7 regresisons with recovery/sync (Yu) - Reshape fix (David)" * tag 'block-6.7-2023-12-08' of git://git.kernel.dk/linux: md: split MD_RECOVERY_NEEDED out of mddev_resume nvme-pci: Add sleep quirk for Kingston drives md: fix stopping sync thread md: don't leave 'MD_RECOVERY_FROZEN' in error path of md_set_readonly() md: fix missing flush of sync_work nvme: fix deadlock between reset and scan nvme: prevent potential spectre v1 gadget nvme: improve NVME_HOST_AUTH and NVME_TARGET_AUTH config descriptions nvme-ioctl: move capable() admin check to the end nvme: ensure reset state check ordering nvme: introduce helper function to get ctrl state md/raid6: use valid sector values to determine if an I/O should wait on the reshape
2023-12-08Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds11-43/+80
Pull rdma fixes from Jason Gunthorpe: "Primarily rtrs and irdma fixes: - Fix uninitialized value in ib_get_eth_speed() - Fix hns refusing to work if userspace doesn't select the correct congestion control algorithm - Several irdma fixes - unreliable Send Queue Drain, use after free, 64k page size bugs, device removal races - Several rtrs bug fixes - crashes, memory leaks, use after free, bad credit accounting, bogus WARN_ON - Typos and a MAINTAINER update" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: RDMA/irdma: Avoid free the non-cqp_request scratch RDMA/irdma: Fix support for 64k pages RDMA/irdma: Ensure iWarp QP queue memory is OS paged aligned RDMA/core: Fix umem iterator when PAGE_SIZE is greater then HCA pgsz RDMA/irdma: Fix UAF in irdma_sc_ccq_get_cqe_info() RDMA/bnxt_re: Correct module description string RDMA/rtrs-clt: Remove the warnings for req in_use check RDMA/rtrs-clt: Fix the max_send_wr setting RDMA/rtrs-srv: Destroy path files after making sure no IOs in-flight RDMA/rtrs-srv: Free srv_mr iu only when always_invalidate is true RDMA/rtrs-srv: Check return values while processing info request RDMA/rtrs-clt: Start hb after path_up RDMA/rtrs-srv: Do not unconditionally enable irq MAINTAINERS: Add Chengchang Tang as Hisilicon RoCE maintainer RDMA/irdma: Add wait for suspend on SQD RDMA/irdma: Do not modify to SQD on error RDMA/hns: Fix unnecessary err return when using invalid congest control algorithm RDMA/core: Fix uninit-value access in ib_get_eth_speed()
2023-12-08Merge tag 'pm-6.7-rc5' of ↵Linus Torvalds1-4/+13
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fix from Rafael Wysocki: "Fix cpufreq reference counting in the DTPM (dynamic thermal and power management) power capping framework (Lukasz Luba)" * tag 'pm-6.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: powercap: DTPM: Fix missing cpufreq_cpu_put() calls
2023-12-08Merge tag 'acpi-6.7-rc5' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fix from Rafael Wysocki: "Fix a possible crash on an attempt to free unallocated memory in the error path of acpi_evaluate_reference() that has been introduced by one of the recent changes (Rafael Wysocki)" * tag 'acpi-6.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: utils: Fix error path in acpi_evaluate_reference()
2023-12-08Merge tag 'hwmon-for-v6.7-rc5' of ↵Linus Torvalds5-4/+25
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: - acpi_power_meter: Fix 4.29 MW output seen if acpi reports bad data - corsair-psu: Fix ability to probe if the driver is built into the kernel - ltc2991: Fix spelling mistake "contiuous" -> "continuous" - max31827: Add missing regulator header file include - nzxt-kraken2: Fix error handling path in probe function * tag 'hwmon-for-v6.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (corsair-psu) Fix probe when built-in hwmon: (nzxt-kraken2) Fix error handling path in kraken2_probe() hwmon: (acpi_power_meter) Fix 4.29 MW bug hwmon: max31827: include regulator header hwmon: ltc2991: Fix spelling mistake "contiuous" -> "continuous"
2023-12-08Merge tag 'pwm/for-6.7-rc5-fixes' of https://git.pengutronix.de/git/ukl/linuxLinus Torvalds1-0/+2
Pull pwm fix from Uwe Kleine-König: "This fixes a null pointer exception in the bcm2835 pwm driver. The problem was introduced by a combination of two commits merged for v6.7-rc1 where each change alone would have been fine. Thanks to Florian Fainelli for noticing and fixing the issue" * tag 'pwm/for-6.7-rc5-fixes' of https://git.pengutronix.de/git/ukl/linux: pwm: bcm2835: Fix NPD in suspend/resume
2023-12-08Merge tag 'drm-fixes-2023-12-08' of git://anongit.freedesktop.org/drm/drmLinus Torvalds38-98/+501
Pull drm fixes from Dave Airlie: "Regular weekly fixes, mostly amdgpu and i915 as usual. A couple of nouveau, panfrost, one core and one bridge Kconfig. Seems about normal for rc5. atomic-helpers: - invoke end_fb_access while owning plane state i915: - fix a missing dep for a previous fix - Relax BXT/GLK DSI transcoder hblank limits - Fix DP MST .mode_valid_ctx() return values - Reject DP MST modes that require bigjoiner (as it's not yet supported on DP MST) - Fix _intel_dsb_commit() variable type to allow negative values nouveau: - document some bits of gsp rm - flush vmm more on tu102 to avoid hangs panfrost: - fix imported dma-buf objects residency - fix device freq update bridge: - tc358768 - fix Kconfig amdgpu: - Disable MCBP on gfx9 - DC vbios fix - eDP fix - dml2 UBSAN fix - SMU 14 fix - RAS fixes - dml KASAN/KCSAN fix - PSP 13 fix - Clockgating fixes - Suspend fix exynos: - fix pointer dereference - fix wrong error check" * tag 'drm-fixes-2023-12-08' of git://anongit.freedesktop.org/drm/drm: (27 commits) drm/exynos: fix a wrong error checking drm/exynos: fix a potential error pointer dereference drm/amdgpu: fix buffer funcs setting order on suspend drm/amdgpu: Avoid querying DRM MGCG status drm/amdgpu: Update HDP 4.4.2 clock gating flags drm/amdgpu: Add NULL checks for function pointers drm/amdgpu: Restrict extended wait to PSP v13.0.6 drm/amd/display: Increase frame warning limit with KASAN or KCSAN in dml drm/amdgpu: optimize the printing order of error data drm/amdgpu: Update fw version for boot time error query drm/amd/pm: support new mca smu error code decoding drm/amd/swsmu: update smu v14_0_0 driver if version and metrics table drm/amd/display: Fix array-index-out-of-bounds in dml2 drm/amd/display: Add monitor patch for specific eDP drm/amd/display: Use channel_width = 2 for vram table 3.0 drm/amdgpu: disable MCBP by default drm/atomic-helpers: Invoke end_fb_access while owning plane state drm/i915: correct the input parameter on _intel_dsb_commit() drm/i915/mst: Reject modes that require the bigjoiner drm/i915/mst: Fix .mode_valid_ctx() return values ...
2023-12-08hwmon: (corsair-psu) Fix probe when built-inArmin Wolf1-1/+17
It seems that when the driver is built-in, the HID bus is initialized after the driver is loaded, which whould cause module_hid_driver() to fail. Fix this by registering the driver after the HID bus using late_initcall() in accordance with other hwmon HID drivers. Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20231207210723.222552-1-W_Armin@gmx.de [groeck: Dropped "compile tested" comment; the patch has been tested but the tester did not provide a Tested-by: tag] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-12-08Merge tag 'soc-fixes-6.7-1' of ↵Linus Torvalds3-34/+71
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "Most of the changes are devicetree fixes for NXP, Mediatek, Rockchips Arm machines as well as Microchip RISC-V, and most of these address build-time warnings for spec violations and other minor issues. One of the Mediatek warnings was enabled by default and prevented a clean build. The ones that address serious runtime issues are all on the i.MX platform: - a boot time panic on imx8qm - USB hanging under load on imx8 - regressions on the imx93 ethernet phy Code fixes include a minor error handling for the i.MX PMU driver, and a number of firmware driver fixes: - OP-TEE fix for supplicant based device enumeration, and a new sysfs attribute to needed to fix a race against userspace - Arm SCMI fix for possible truncation/overflow in the frequency computations - Multiple FF-A fixes for the newly added notification support" * tag 'soc-fixes-6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (55 commits) MAINTAINERS: change the S32G2 maintainer's email address. arm64: dts: rockchip: Fix eMMC Data Strobe PD on rk3588 ARM: dts: imx28-xea: Pass the 'model' property ARM: dts: imx7: Declare timers compatible with fsl,imx6dl-gpt MAINTAINERS: reinstate freescale ARM64 DT directory in i.MX entry arm64: dts: imx8-apalis: set wifi regulator to always-on ARM: imx: Check return value of devm_kasprintf in imx_mmdc_perf_init arm64: dts: imx8ulp: update gpio node name to align with register address arm64: dts: imx93: update gpio node name to align with register address arm64: dts: imx93: correct mediamix power arm64: dts: imx8qm: Add imx8qm's own pm to avoid panic during startup arm64: dts: freescale: imx8-ss-dma: Fix #pwm-cells arm64: dts: freescale: imx8-ss-lsio: Fix #pwm-cells dt-bindings: pwm: imx-pwm: Unify #pwm-cells for all compatibles ARM: dts: imx6ul-pico: Describe the Ethernet PHY clock arm64: dts: imx8mp: imx8mq: Add parkmode-disable-ss-quirk on DWC3 arm64: dts: rockchip: Fix PCI node addresses on rk3399-gru arm64: dts: rockchip: drop interrupt-names property from rk3588s dfi firmware: arm_scmi: Fix possible frequency truncation when using level indexing mode firmware: arm_scmi: Fix frequency truncation by promoting multiplier type ...
2023-12-08Merge tag 'mm-hotfixes-stable-2023-12-07-18-47' of ↵Linus Torvalds2-6/+18
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc fixes from Andrew Morton: "31 hotfixes. Ten of these address pre-6.6 issues and are marked cc:stable. The remainder address post-6.6 issues or aren't considered serious enough to justify backporting" * tag 'mm-hotfixes-stable-2023-12-07-18-47' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (31 commits) mm/madvise: add cond_resched() in madvise_cold_or_pageout_pte_range() nilfs2: prevent WARNING in nilfs_sufile_set_segment_usage() mm/hugetlb: have CONFIG_HUGETLB_PAGE select CONFIG_XARRAY_MULTI scripts/gdb: fix lx-device-list-bus and lx-device-list-class MAINTAINERS: drop Antti Palosaari highmem: fix a memory copy problem in memcpy_from_folio nilfs2: fix missing error check for sb_set_blocksize call kernel/Kconfig.kexec: drop select of KEXEC for CRASH_DUMP units: add missing header drivers/base/cpu: crash data showing should depends on KEXEC_CORE mm/damon/sysfs-schemes: add timeout for update_schemes_tried_regions scripts/gdb/tasks: fix lx-ps command error mm/Kconfig: make userfaultfd a menuconfig selftests/mm: prevent duplicate runs caused by TEST_GEN_PROGS mm/damon/core: copy nr_accesses when splitting region lib/group_cpus.c: avoid acquiring cpu hotplug lock in group_cpus_evenly checkstack: fix printed address mm/memory_hotplug: fix error handling in add_memory_resource() mm/memory_hotplug: add missing mem_hotplug_lock .mailmap: add a new address mapping for Chester Lin ...
2023-12-08tty: ttyprintk: convert to u8 and size_tJiri Slaby (SUSE)1-3/+3
Switch character types to u8 and sizes to size_t. To conform to characters/sizes in the rest of the tty layer. Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20231206073712.17776-26-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-08tty: serdev: convert to u8 and size_tJiri Slaby (SUSE)20-60/+56
Switch character types to u8 and sizes to size_t. To conform to characters/sizes in the rest of the tty layer. This patch converts struct serdev_device_ops hooks and its instantiations. Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org> Cc: Rob Herring <robh@kernel.org> Acked-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20231206073712.17776-24-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-08tty: serdev: convert to u8 and size_t in serdev_controller_opsJiri Slaby (SUSE)1-1/+1
Switch character types to u8 and sizes to size_t. To conform to characters/sizes in the rest of the tty layer. In this patch, only struct serdev_controller_ops hooks. The rest will follow. Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org> Cc: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20231206073712.17776-23-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-08tty: nozomi: convert to u8 and size_tJiri Slaby (SUSE)1-5/+4
Switch character types to u8 and sizes to size_t. To conform to characters/sizes in the rest of the tty layer. Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20231206073712.17776-22-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-08tty: n_hdlc: convert to u8 and size_tJiri Slaby (SUSE)1-5/+5
Switch character types to u8 and sizes to size_t. To conform to characters/sizes in the rest of the tty layer. Note u8 is already both passed in and expected on output. Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20231206073712.17776-21-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-08tty: n_gsm: convert to u8 and size_tJiri Slaby (SUSE)1-9/+8
Switch character types to u8 and sizes to size_t. To conform to characters/sizes in the rest of the tty layer. Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20231206073712.17776-20-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-08tty: mxser: convert to u8 and size_tJiri Slaby (SUSE)1-4/+4
Switch character types to u8 and sizes to size_t. To conform to characters/sizes in the rest of the tty layer. Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20231206073712.17776-19-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-08tty: moxa: convert to u8 and size_tJiri Slaby (SUSE)1-7/+8
Switch character types to u8 and sizes to size_t. To conform to characters/sizes in the rest of the tty layer. Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20231206073712.17776-18-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-08tty: mmc: sdio: use u8 for flagJiri Slaby (SUSE)1-2/+1
Switch character types to u8. To conform to characters in the rest of the tty layer. Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: linux-mmc@vger.kernel.org Link: https://lore.kernel.org/r/20231206073712.17776-17-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-02 23:47:54 +0300