summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2018-11-06ice: Fix flags for port VLANMd Fahad Iqbal Polash1-1/+1
According to the spec, whenever insert PVID field is set, the VLAN driver insertion mode should be set to 01b which isn't done currently. Fix it. Signed-off-by: Md Fahad Iqbal Polash <md.fahad.iqbal.polash@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-11-06ice: Remove duplicate addition of VLANs in replay pathAnirudh Venkataramanan3-39/+6
ice_restore_vlan and active_vlans were originally put in place to reprogram VLAN filters in the replay path. This is now done as part of the much broader VSI rebuild/replay framework. So remove both ice_restore_vlan and active_vlans Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-11-06ice: Free VSI contexts during for unloadVictor Raj3-0/+17
In the unload path, all VSIs are freed. Also free the related VSI contexts to prevent memory leaks. Signed-off-by: Victor Raj <victor.raj@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-11-06ice: Fix dead device link issue with flow controlAkeem G Abodunrin1-1/+6
Setting Rx or Tx pause parameter currently results in link loss on the interface, requiring the platform/host to be cold power cycled. Fix it. Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-11-06ice: Check for reset in progress during removeAnirudh Venkataramanan2-0/+8
The remove path does not currently check to see if a reset is in progress before proceeding. This can cause a resource collision resulting in various types of errors. Check for reset in progress and wait for a reasonable amount of time before allowing the remove to progress. Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-11-06ice: Set carrier state and start/stop queues in rebuildAnirudh Venkataramanan1-1/+17
Set the carrier state post rebuild by querying the link status. Also start/stop queues based on link status. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-11-06drm/amd: Update atom_smu_info_v3_3 structureLeo Li1-2/+5
Mainly adding the WAFL spread spectrum info, for adjusting display clocks when XGMI is enabled. Signed-off-by: Leo Li <sunpeng.li@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-06drm: Add drm_any_plane_has_format()Ville Syrjälä1-0/+23
Add a function to check whether there is at least one plane that supports a specific format and modifier combination. Drivers can use this to reject unsupported formats/modifiers in .fb_create(). v2: Accept anyformat if the driver doesn't do planes (Eric) s/planes_have_format/any_plane_has_format/ (Eric) Check the modifier as well since we already have a function that does both v3: Don't do the check in the core since we may not know the modifier yet, instead export the function and let drivers call it themselves Cc: Eric Anholt <eric@anholt.net> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181029183453.28541-1-ville.syrjala@linux.intel.com
2018-11-06net: phy: Allow BCM54616S PHY to setup internal TX/RX clock delayTao Ren1-2/+16
This patch allows users to enable/disable internal TX and/or RX clock delay for BCM54616S PHYs so as to satisfy RGMII timing specifications. On a particular platform, whether TX and/or RX clock delay is required depends on how PHY connected to the MAC IP. This requirement can be specified through "phy-mode" property in the platform device tree. The patch is inspired by commit 733336262b28 ("net: phy: Allow BCM5481x PHYs to setup internal TX/RX clock delay"). Signed-off-by: Tao Ren <taoren@fb.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-06drm/amdgpu/psp: add set_topology_info functionHawking Zhang1-1/+23
set_topology_info is used for driver to set current topology info to xgmi ta Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Shaoyun Liu <Shaoyun.Liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-06drm/amdgpu/psp: add get_topology_info functionHawking Zhang1-0/+39
get_topology_info function is used for driver to query topology_info for current device from xgmi ta Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Shaoyun Liu <Shaoyun.Liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-06drm/amdgpu/psp: update topology info structuresHawking Zhang2-23/+18
topology info structure needs to match with the one defined in xgmi ta Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Shaoyun Liu <Shaoyun.Liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-06drm/amdgpu/psp: add get_hive_id functionHawking Zhang1-5/+12
get_hive_id is used for driver to query hive_id for current device from xgmi ta Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Shaoyun Liu <Shaoyun.Liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-06drm/amdgpu/psp: add get_node_id functionHawking Zhang4-9/+28
get_node_id function is used for driver to get node_id for current device from xgmi ta Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Shaoyun Liu <Shaoyun.Liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-06drm/amdgpu/psp: initialize xgmi session (v2)Hawking Zhang2-1/+71
Setup and tear down xgmi as part of psp. v2: - make psp_xgmi_terminate static - squash in: drm/amdgpu: only issue xgmi cmd when it is enabled drm/amdgpu/psp: terminate xgmi ta in suspend and hw_fini phase Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-06drm/amdgpu/psp: add helper function to invoke xgmi ta per ta cmd_idHawking Zhang2-0/+39
psp_xgmi_invoke is the helper function to issue ta cmd to firmware Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-06drm/amdgpu/psp: add xgmi ta headerHawking Zhang1-0/+130
Add the psp xgmi driver interface. Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-06drm/amdgpu/psp: add helper function to load/unload xgmi taHawking Zhang1-0/+98
Add helper functions for the psp xgmi ta. Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-06drm/amdgpu/psp: init/de-init xgmi ta microcodeHawking Zhang3-10/+42
Add ucode handling for psp xgmi ta firmware. Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-06drm/amdgpu/psp: add structure for xgmi ta and its shared bufferHawking Zhang1-1/+17
Add data structures for xgmi trusted application. Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-06drm/amdgpu/vega20: add CLK base offsetAlex Deucher1-0/+1
In case we need to access CLK registers. Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-06drm/amd/display: Stop leaking planesHarry Wentland1-1/+1
[Why] drm_plane_cleanup does not free the plane. [How] Call drm_primary_helper_destroy which will also free the plane. Signed-off-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-06drm/amdgpu: Drop amdgpu_planeHarry Wentland2-26/+20
It's unnecessarily duplicating drm_plane_type. Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-06drm/amd/display: Fix misleading buffer informationShaokun Zhang1-2/+2
RETIMER_REDRIVER_INFO shows the buffer as a decimal value with a '0x' prefix, which is somewhat misleading. Fix it to print hexadecimal, as was intended. Fixes: 2f14bc89("drm/amd/display: add retimer log for HWQ tuning use.") Cc: Charlene Liu <charlene.liu@amd.com> Cc: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com> Reviewed-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-06drm/amd: Don't fail on backlight = 0David Francis1-8/+10
Amgpu's backlight update status function was returning 1 (an error value) when the backlight property was 0. This breaks users that assume 0 is a valid backlight value (which is a correct assumption) If the user passes in a backlight value of 0, tell them everything is fine, then write a value of 1 to hardware. Signed-off-by: David Francis <David.Francis@amd.com> Bugzilla: https://bugs.freedesktop.org/108668 Fixes: 416615ea9578 ("drm/amd/display: set backlight level limit to 1") Cc: Suresh.Guttula@amd.com Cc: Harry.Wentland@amd.com Cc: Samantham@posteo.net Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-06drm/amd: Update atom_smu_info_v3_3 structureLeo Li1-2/+5
Mainly adding the WAFL spread spectrum info, for adjusting display clocks when XGMI is enabled. Signed-off-by: Leo Li <sunpeng.li@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-06acpi/nfit, x86/mce: Validate a MCE's address before using itVishal Verma1-0/+4
The NFIT machine check handler uses the physical address from the mce structure, and compares it against information in the ACPI NFIT table to determine whether that location lies on an NVDIMM. The mce->addr field however may not always be valid, and this is indicated by the MCI_STATUS_ADDRV bit in the status field. Export mce_usable_address() which already performs validation for the address, and use it in the NFIT handler. Fixes: 6839a6d96f4e ("nfit: do an ARS scrub on hitting a latent media error") Reported-by: Robert Elliott <elliott@hpe.com> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> CC: Arnd Bergmann <arnd@arndb.de> Cc: Dan Williams <dan.j.williams@intel.com> CC: Dave Jiang <dave.jiang@intel.com> CC: elliott@hpe.com CC: "H. Peter Anvin" <hpa@zytor.com> CC: Ingo Molnar <mingo@redhat.com> CC: Len Brown <lenb@kernel.org> CC: linux-acpi@vger.kernel.org CC: linux-edac <linux-edac@vger.kernel.org> CC: linux-nvdimm@lists.01.org CC: Qiuxu Zhuo <qiuxu.zhuo@intel.com> CC: "Rafael J. Wysocki" <rjw@rjwysocki.net> CC: Ross Zwisler <zwisler@kernel.org> CC: stable <stable@vger.kernel.org> CC: Thomas Gleixner <tglx@linutronix.de> CC: Tony Luck <tony.luck@intel.com> CC: x86-ml <x86@kernel.org> CC: Yazen Ghannam <yazen.ghannam@amd.com> Link: http://lkml.kernel.org/r/20181026003729.8420-2-vishal.l.verma@intel.com
2018-11-06acpi/nfit, x86/mce: Handle only uncorrectable machine checksVishal Verma1-2/+2
The MCE handler for nfit devices is called for memory errors on a Non-Volatile DIMM and adds the error location to a 'badblocks' list. This list is used by the various NVDIMM drivers to avoid consuming known poison locations during IO. The MCE handler gets called for both corrected and uncorrectable errors. Until now, both kinds of errors have been added to the badblocks list. However, corrected memory errors indicate that the problem has already been fixed by hardware, and the resulting interrupt is merely a notification to Linux. As far as future accesses to that location are concerned, it is perfectly fine to use, and thus doesn't need to be included in the above badblocks list. Add a check in the nfit MCE handler to filter out corrected mce events, and only process uncorrectable errors. Fixes: 6839a6d96f4e ("nfit: do an ARS scrub on hitting a latent media error") Reported-by: Omar Avelar <omar.avelar@intel.com> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> CC: Arnd Bergmann <arnd@arndb.de> CC: Dan Williams <dan.j.williams@intel.com> CC: Dave Jiang <dave.jiang@intel.com> CC: elliott@hpe.com CC: "H. Peter Anvin" <hpa@zytor.com> CC: Ingo Molnar <mingo@redhat.com> CC: Len Brown <lenb@kernel.org> CC: linux-acpi@vger.kernel.org CC: linux-edac <linux-edac@vger.kernel.org> CC: linux-nvdimm@lists.01.org CC: Qiuxu Zhuo <qiuxu.zhuo@intel.com> CC: "Rafael J. Wysocki" <rjw@rjwysocki.net> CC: Ross Zwisler <zwisler@kernel.org> CC: stable <stable@vger.kernel.org> CC: Thomas Gleixner <tglx@linutronix.de> CC: Tony Luck <tony.luck@intel.com> CC: x86-ml <x86@kernel.org> CC: Yazen Ghannam <yazen.ghannam@amd.com> Link: http://lkml.kernel.org/r/20181026003729.8420-1-vishal.l.verma@intel.com
2018-11-06drm/lease: look at ->universal_planes only onceDaniel Vetter1-6/+8
It's lockless, and userspace might chance it underneath us. That's not really a problem, all userspace gets is a slightly dysfunctional lease with the current code. But this might change, and gcc might decide to reload a few too many times, and then boom. So better safe than sorry. v2: Remove the now unused lessor_priv argument from validate_lease() (Keith). v3: Actually add everything ... silly me. Cc: Keith Packard <keithp@keithp.com> Cc: Dave Airlie <airlied@gmail.com> Acked-by: Keith Packard <keithp@keithp.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181105101211.22737-1-daniel.vetter@ffwll.ch
2018-11-06drm/lease: debug output for lease creationDaniel Vetter1-4/+14
I spent a bit of time scratching heads and figuring out why the igts don't work. Probably useful to keep this work. Cc: Keith Packard <keithp@keithp.com> Cc: Dave Airlie <airlied@gmail.com> Acked-by: Keith Packard <keithp@keithp.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20181102132543.16486-1-daniel.vetter@ffwll.ch
2018-11-06mt76: fix building without CONFIG_LEDS_CLASSArnd Bergmann3-5/+15
When CONFIG_LEDS_CLASS is disabled, or it is a loadable module while mt76 is built-in, we run into a link error: drivers/net/wireless/mediatek/mt76/mac80211.o: In function `mt76_register_device': mac80211.c:(.text+0xb78): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `devm_of_led_classdev_register' We don't really need a hard dependency here as the driver can presumably work just fine without LEDs, so this follows the iwlwifi example and adds a separate Kconfig option for the LED support, this will be available whenever it will link, and otherwise the respective code gets left out from the driver object. Fixes: 17f1de56df05 ("mt76: add common code shared between multiple chipsets") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-11-06brcmutil: really fix decoding channel info for 160 MHz bandwidthRafał Miłecki1-0/+3
Previous commit /adding/ support for 160 MHz chanspecs was incomplete. It didn't set bandwidth info and didn't extract control channel info. As the result it was also using uninitialized "sb" var. This change has been tested for two chanspecs found to be reported by some devices/firmwares: 1) 60/160 (0xee32) Before: chnum:50 control_ch_num:36 After: chnum:50 control_ch_num:60 2) 120/160 (0xed72) Before: chnum:114 control_ch_num:100 After: chnum:114 control_ch_num:120 Fixes: 330994e8e8ec ("brcmfmac: fix for proper support of 160MHz bandwidth") Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-11-06wlcore: Fixup "Add support for optional wakeirq"John Stultz1-6/+11
After commit 3c83dd577c7f ("wlcore: Add support for optional wakeirq") landed upstream, I started seeing the following oops on my HiKey board: [ 1.870279] Unable to handle kernel read from unreadable memory at virtual address 0000000000000010 [ 1.870283] Mem abort info: [ 1.870287] ESR = 0x96000005 [ 1.870292] Exception class = DABT (current EL), IL = 32 bits [ 1.870296] SET = 0, FnV = 0 [ 1.870299] EA = 0, S1PTW = 0 [ 1.870302] Data abort info: [ 1.870306] ISV = 0, ISS = 0x00000005 [ 1.870309] CM = 0, WnR = 0 [ 1.870312] [0000000000000010] user address but active_mm is swapper [ 1.870318] Internal error: Oops: 96000005 [#1] PREEMPT SMP [ 1.870327] CPU: 0 PID: 5 Comm: kworker/0:0 Not tainted 4.19.0-05129-gb3d1e8e #48 [ 1.870331] Hardware name: HiKey Development Board (DT) [ 1.870350] Workqueue: events_freezable mmc_rescan [ 1.870358] pstate: 60400005 (nZCv daif +PAN -UAO) [ 1.870366] pc : wl1271_probe+0x210/0x350 [ 1.870371] lr : wl1271_probe+0x210/0x350 [ 1.870374] sp : ffffff80080739b0 [ 1.870377] x29: ffffff80080739b0 x28: 0000000000000000 [ 1.870384] x27: 0000000000000000 x26: 0000000000000000 [ 1.870391] x25: 0000000000000036 x24: ffffffc074ecb598 [ 1.870398] x23: ffffffc07ffdce78 x22: ffffffc0744ed808 [ 1.870404] x21: ffffffc074ecbb98 x20: ffffff8008ff9000 [ 1.870411] x19: ffffffc0744ed800 x18: ffffff8008ff9a48 [ 1.870418] x17: 0000000000000000 x16: 0000000000000000 [ 1.870425] x15: ffffffc074ecb503 x14: ffffffffffffffff [ 1.870431] x13: ffffffc074ecb502 x12: 0000000000000030 [ 1.870438] x11: 0101010101010101 x10: 0000000000000040 [ 1.870444] x9 : ffffffc075400248 x8 : ffffffc075400270 [ 1.870451] x7 : 0000000000000000 x6 : 0000000000000000 [ 1.870457] x5 : 0000000000000000 x4 : 0000000000000000 [ 1.870463] x3 : 0000000000000000 x2 : 0000000000000000 [ 1.870469] x1 : 0000000000000028 x0 : 0000000000000000 [ 1.870477] Process kworker/0:0 (pid: 5, stack limit = 0x(____ptrval____)) [ 1.870480] Call trace: [ 1.870485] wl1271_probe+0x210/0x350 [ 1.870491] sdio_bus_probe+0x100/0x128 [ 1.870500] really_probe+0x1a8/0x2b8 [ 1.870506] driver_probe_device+0x58/0x100 [ 1.870511] __device_attach_driver+0x94/0xd8 [ 1.870517] bus_for_each_drv+0x70/0xc8 [ 1.870522] __device_attach+0xe0/0x140 [ 1.870527] device_initial_probe+0x10/0x18 [ 1.870532] bus_probe_device+0x94/0xa0 [ 1.870537] device_add+0x374/0x5b8 [ 1.870542] sdio_add_func+0x60/0x88 [ 1.870546] mmc_attach_sdio+0x1b0/0x358 [ 1.870551] mmc_rescan+0x2cc/0x390 [ 1.870558] process_one_work+0x12c/0x320 [ 1.870563] worker_thread+0x48/0x458 [ 1.870569] kthread+0xf8/0x128 [ 1.870575] ret_from_fork+0x10/0x18 [ 1.870583] Code: 92400c21 b2760021 a90687a2 97e95bf9 (f9400803) [ 1.870587] ---[ end trace 1e15f81d3c139ca9 ]--- It seems since we don't have a wakeirq value in the dts, the wakeirq value in wl1271_probe() is zero, which then causes trouble in irqd_get_trigger_type(irq_get_irq_data(wakeirq)). This patch tries to address this by checking if wakeirq is zero, and not trying to add it to the resources if that is the case. Fixes: 3c83dd577c7f ("wlcore: Add support for optional wakeirq") Cc: Tony Lindgren <tony@atomide.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: Eyal Reizer <eyalr@ti.com> Cc: Anders Roxell <anders.roxell@linaro.org> Cc: linux-wireless@vger.kernel.org Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: John Stultz <john.stultz@linaro.org> Tested-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-11-06ath9k: Fix a locking bug in ath9k_add_interface()Dan Carpenter1-2/+1
We tried to revert commit d9c52fd17cb4 ("ath9k: fix tx99 with monitor mode interface") but accidentally missed part of the locking change. The lock has to be held earlier so that we're holding it when we do "sc->tx99_vif = vif;" and also there in the current code there is a stray unlock before we have taken the lock. Fixes: 6df0580be8bc ("ath9k: add back support for using active monitor interfaces for tx99") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-11-06clk: fixed-factor: fix of_node_get-put imbalanceRicardo Ribalda Delgado1-0/+1
When the fixed factor clock is created by devicetree, of_clk_add_provider is called. Add a call to of_clk_del_provider in the remove function to balance it out. Reported-by: Alan Tull <atull@kernel.org> Fixes: 971451b3b15d ("clk: fixed-factor: Convert into a module platform driver") Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-11-06drm/i915: Fix ilk+ watermarks when disabling pipesVille Syrjälä1-11/+6
We're no longer programming any watermarks when we're disabling a pipe. That means ilk_wm_merge() & co. will keep considering the any pipe that is getting disabled as still enabled. Thus we either get no LP1+ watermakrs (ilk-ivb), or we get suboptimal ones (hsw-bdw). This seems to have been broken by commit b6b178a77210 ("drm/i915: Calculate ironlake intermediate watermarks correctly, v2."). Before that we apparently had some difference between the intermediate and optimal watermarks and so we would program the optiomal ones. Now intermediate and optimal are identical for disabled pipes and so we don't program either. Fix this by programming the intermediate watermarks even for disabled pipes. We were already doing that for skl+. We'll leave out gmch platforms for now since those do the merging in a different manner and should work as is. We'll want to unify this eventually, but play it safe for now and just put in a FIXME. Cc: stable@vger.kernel.org Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Fixes: b6b178a77210 ("drm/i915: Calculate ironlake intermediate watermarks correctly, v2.") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181025130536.29024-1-ville.syrjala@linux.intel.com Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> #irc (cherry picked from commit a748faea3bfd7fd1d1485bc1c426c7d460cc6503) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2018-11-06drm/sun4i: tcon: prevent tcon->panel dereference if NULLGiulio Benetti1-1/+2
If tcon->panel pointer is NULL, trying to dereference from it (i.e. tcon->panel->connector) will cause a null pointer dereference. Add tcon->panel null pointer check before calling sun4i_tcon0_mode_set_dithering(). Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com> Fixes: f11adcecbd5f ("drm/sun4i: tcon: Add dithering support for RGB565/RGB666 LCD panels") Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181005215951.99003-2-giulio.benetti@micronovasrl.com
2018-11-06drm/sun4i: tcon: fix check of tcon->panel null pointerGiulio Benetti3-5/+5
Since tcon->panel is a pointer returned by of_drm_find_panel() need to check if it is not NULL, hence a valid pointer. IS_ERR() instead checks return error values, not NULL pointers. Substitute "if (!IS_ERR(tcon->panel))" with "if (tcon->panel)". Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181005215951.99003-1-giulio.benetti@micronovasrl.com
2018-11-06iommu/vt-d: Fix NULL pointer dereference in prq_event_thread()Lu Baolu1-1/+1
When handling page request without pasid event, go to "no_pasid" branch instead of "bad_req". Otherwise, a NULL pointer deference will happen there. Cc: Ashok Raj <ashok.raj@intel.com> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: Sohil Mehta <sohil.mehta@intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Fixes: a222a7f0bb6c9 'iommu/vt-d: Implement page request handling' Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-11-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds17-277/+250
Pull networking fixes from David Miller: 1) Handle errors mid-stream of an all dump, from Alexey Kodanev. 2) Fix build of openvswitch with certain combinations of netfilter options, from Arnd Bergmann. 3) Fix interactions between GSO and BQL, from Eric Dumazet. 4) Don't put a '/' in RTL8201F's sysfs file name, from Holger Hoffstätte. 5) S390 qeth driver fixes from Julian Wiedmann. 6) Allow ipv6 link local addresses for netconsole when both source and destination are link local, from Matwey V. Kornilov. 7) Fix the BPF program address seen in /proc/kallsyms, from Song Liu. 8) Initialize mutex before use in dsa microchip driver, from Tristram Ha. 9) Out-of-bounds access in hns3, from Yunsheng Lin. 10) Various netfilter fixes from Stefano Brivio, Jozsef Kadlecsik, Jiri Slaby, Florian Westphal, Eric Westbrook, Andrey Ryabinin, and Pablo Neira Ayuso. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (50 commits) net: alx: make alx_drv_name static net: bpfilter: fix iptables failure if bpfilter_umh is disabled sock_diag: fix autoloading of the raw_diag module net: core: netpoll: Enable netconsole IPv6 link local address ipv6: properly check return value in inet6_dump_all() rtnetlink: restore handling of dumpit return value in rtnl_dump_all() net/ipv6: Move anycast init/cleanup functions out of CONFIG_PROC_FS bonding/802.3ad: fix link_failure_count tracking net: phy: realtek: fix RTL8201F sysfs name sctp: define SCTP_SS_DEFAULT for Stream schedulers sctp: fix strchange_flags name for Stream Change Event mlxsw: spectrum: Fix IP2ME CPU policer configuration openvswitch: fix linking without CONFIG_NF_CONNTRACK_LABELS qed: fix link config error handling net: hns3: Fix for out-of-bounds access when setting pfc back pressure net/mlx4_en: use __netdev_tx_sent_queue() net: do not abort bulk send on BQL status net: bql: add __netdev_tx_sent_queue() s390/qeth: report 25Gbit link speed s390/qeth: sanitize ARP requests ...
2018-11-06drm/i915: Don't oops during modeset shutdown after lpe audio deinitVille Syrjälä1-1/+3
We deinit the lpe audio device before we call drm_atomic_helper_shutdown(), which means the platform device may already be gone when it comes time to shut down the crtc. As we don't know when the last reference to the platform device gets dropped by the audio driver we can't assume that the device and its data are still around when turning off the crtc. Mark the platform device as gone as soon as we do the audio deinit. Cc: stable@vger.kernel.org Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181105194604.6994-1-ville.syrjala@linux.intel.com Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (cherry picked from commit f45a7977d1140c11f334e01a9f77177ed68e3bfa) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2018-11-06drm/i915: Mark pin flags as u64Chris Wilson1-14/+14
Since the flags are being used to operate on a u64 variable, they too need to be marked as such so that the inverses are full width (and not zero extended on 32b kernels and bdw+). Reported-by: Sergii Romantsov <sergii.romantsov@globallogic.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@vger.kernel.org Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181102161232.17742-2-chris@chris-wilson.co.uk (cherry picked from commit 83b466b1dc5f0b4d33f0a901e8b00197a8f3582d) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2018-11-06drm/i915/icl: Fix the macros for DFLEXDPMLE register bitsManasi Navare1-2/+6
This patch fixes the macros used for defining the DFLEXDPMLE register bit fields. This accounts for changes in the spec. Fixes: a2bc69a1a9d6 ("drm/i915/icl: Add register definition for DFLEXDPMLE") Cc: Animesh Manna <animesh.manna@intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Jose Roberto de Souza <jose.souza@intel.com> Cc: <stable@vger.kernel.org> # v4.19+ Signed-off-by: Manasi Navare <manasi.d.navare@intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181023191248.26418-1-manasi.d.navare@intel.com (cherry picked from commit b4335ec0a3ee6229a570755f8fb95dc8a7c694f2) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2018-11-06drm/i915: Fix error handling for the NV12 fb dimensions checkVille Syrjälä1-1/+1
Let's not leak obj->framebuffer_references when we decide that the framebuffer domensions are not suitable for NV12. Cc: stable@vger.kernel.org Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Vidya Srinivas <vidya.srinivas@intel.com> Fixes: e44134f2673c ("drm/i915: Add NV12 support to intel_framebuffer_init") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181029140031.11765-1-ville.syrjala@linux.intel.com Reviewed-by: Matt Roper <matthew.d.roper@intel.com> (cherry picked from commit 3b90946fcb6f13b65888c380461793a9dea9d1f4) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2018-11-06drm/i915: Fix VIDEO_DIP_CTL bit shiftsDhinakaran Pandiyan1-6/+6
The shifts for VSC_SELECT bits are wrong, fix it. Good thing is the definitions are unused. v2: Moves definitions in another patch (Manasi) Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Fixes: 7af2be6d54d4 ("drm/i915/icl: Add VIDEO_DIP registers") Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by: Manasi Navare <manasi.d.navare@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181005185643.31660-1-dhinakaran.pandiyan@intel.com (cherry picked from commit 09209662618f9fdc38b8d4da39040c8829fd2d57) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2018-11-06drm/i915/glk: Remove 99% limitation.Rodrigo Vivi1-16/+2
While checking the opportunity to add a display_gen check to allow glk and cnl to be on same bucket I noticed these FIXME cases here. So I got the confirmation from HW architect that we actually never needed this workaround. "GLK supports 2 pixel per clock, so pixel clock can be up to 2 * cdclk." So, this reverts commit 97f55ca5b662 ("drm/i915/glk: limit pixel clock to 99% of cdclk workaround") Fixes: 97f55ca5b662 ("drm/i915/glk: limit pixel clock to 99% of cdclk workaround") Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Madhav Chauhan <madhav.chauhan@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Clinton Taylor <clinton.a.taylor@intel.com> Cc: Arthur J Runyan <arthur.j.runyan@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181026005636.22274-1-rodrigo.vivi@intel.com (cherry picked from commit 42882336e62aab00278114392a16374f272a0c99) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2018-11-06drm/i915: Compare user's 64b GTT offset even on 32bChris Wilson3-2/+3
Beware mixing unsigned long constants and 64b values, as on 32b the constant will be zero extended and discard the high 32b when used as a mask! Reported-by: Sergii Romantsov <sergii.romantsov@globallogic.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108282 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: stable@vger.kernel.org Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181025091823.20571-2-chris@chris-wilson.co.uk (cherry picked from commit 6fc4e48f9ed46e9adff236a0c350074aafa3b7fa) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2018-11-06drm/i915: Mark up GTT sizes as u64Chris Wilson4-8/+8
Since we use a 64b virtual GTT irrespective of the system, we want to ensure that the GTT computations remains 64b even on 32b systems, including treatment of huge virtual pages. No code generation changes on 64b: Reported-by: Sergii Romantsov <sergii.romantsov@globallogic.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108282 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: stable@vger.kernel.org Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181025091823.20571-1-chris@chris-wilson.co.uk (cherry picked from commit 9125963a9494253fa5a29cc1b4169885d2be7042) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2018-11-06drm/i915/hdmi: Add HDMI 2.0 audio clock recovery N valuesClint Taylor1-0/+17
HDMI 2.0 594Mhz modes were incorrectly selecting 25.200Mhz Automatic N value mode instead of HDMI specification values. V2: Fix 88.2 Hz N value Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1540493521-1746-2-git-send-email-clinton.a.taylor@intel.com (cherry picked from commit 5a400aa3c562c4a726b4da286e63c96db905ade1) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2018-11-06drm/i915: Don't apply the 16Gb DIMM wm latency w/a to BXT/GLKVille Syrjälä3-10/+9
The 16Gb DIMM w/a is not applicable to BXT or GLK. Limit it to the appropriate platforms. This was especially harsh on GLK since we don't even try to read the DIMM information on that platforms, hence valid_dimm was always false and thus we always tried to apply the w/a. Furthermore the w/a pushed the level 0 latency above the level 1 latency, which doesn't really make sense. v2: Do the check when populating is_16gb_dimm (Mahesh) Cc: Mahesh Kumar <mahesh1.kumar@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Fixes: 86b592876cb6 ("drm/i915: Implement 16GB dimm wa for latency level-0") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181023182102.31549-1-ville.syrjala@linux.intel.com Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Mahesh Kumar <mahesh1.sh.kumar@gmail.com> (cherry picked from commit 5d6f36b27d2764f3dc940606ee6b7ec5c669af3e) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-29 19:55:47 +0300