summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2012-09-29mtd: gpmi: fix the compiler warningsHuang Shijie3-16/+12
Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-09-29mtd: nand: davinci: add OF support for davinci nand controllerHeiko Schocher1-1/+71
add OF support for the davinci nand controller. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-09-29mtd: allow uclinux map driver to be used on any ColdFire CPU platformGreg Ungerer1-1/+1
The uclinux.c map driver has traditionally been used only on non-MMU based systems. But there is no fundamental reason it can't be used on systems running with virtual memory. Some ColdFire CPU based systems now have full paged MMU hardware and can use the uclinux.c mapping driver, so making the uclinux.c driver configuration depend on !CONFIG_MMU doesn't make sense now. Allow the CONFIG_MTD_UCLINUX option to be enabled if CONFIG_COLDFIRE is enabled. (I have chosen not to just more generally allow uclinux.c for any MMU type to keep this option hidden for most systems that are not interested in setting it). Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-09-29mtd: fix wrong usage of ioremap_nocache() in uclinux.c map driverGreg Ungerer1-6/+9
The uclinux.c mapping driver uses ioremap_nocache() to map its physical mapping address to a system virtual address. Problem is that the region it is mapping is not device memory. It is ordinary system RAM. On most non-MMU systems this doesn't matter, and the mapping is always a 1:1 translation of the address. On paged memory systems on some architectures the page table mappings are not compatible between normal RAM and device memory. If we want to use the uclinux.c mapping driver on real MMU enabled systems we should be using the kernel virtual address that the mapping is at. For architectures that support the traditional initrd they use phys_to_virt or __va to convert the physical start initrd address to a kernel usable virtual address. The uclinux filesystem mapping is even more restrictive than the typical initrd, it always follows the kernels own bss section (so always in directly mapped memory). Therefore we can use the usual phys_to_virt to translate the physical start address to a virtual address. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-09-29mtd: s3c2410: Fix line over 80 characters warningSachin Kamat1-10/+20
Fixes the following checkpatch warnings: WARNING: line over 80 characters Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-09-29mtd: s3c2410: Fix checkpatch warnings and errors related to whitespacesSachin Kamat1-8/+9
Fixes checkpatch warnings and errors related to whitespaces. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-09-29mtd: s3c2410: Do not initialise statics to 0 or NULLSachin Kamat1-37/+27
Fixes the following checkpatch errors: ERROR: do not initialise statics to 0 or NULL +static int hardware_ecc = 0; ERROR: do not initialise statics to 0 or NULL +static const int clock_stop = 0; Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-09-29mtd: s3c2410: Use <linux/io.h> instead of <asm/io.h>Sachin Kamat1-2/+1
Fixes the following checkpatch warning: WARNING: Use #include <linux/io.h> instead of <asm/io.h> Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-09-29mtd: s3c2410: Use pr_* instead of printkSachin Kamat1-1/+4
Use pr_* instead of printk. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-09-29mtd: s3c2410: Use module_platform_driver()Sachin Kamat1-14/+1
This makes the code simpler by eliminating module_init() and module_exit(). Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-09-29mtd: nand: Include IMX6 in the list of supported SoCsFabio Estevam1-1/+1
Include IMX6 in the list of supported SoCs. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-09-29mtd: autcpu12-nvram: Convert driver to platform_deviceAlexander Shiyan2-70/+82
Because we can have a single kernel to support multiple machines, we need to make loading specific drivers for the target platform only. For this, driver is converted to the platform driver. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-09-29mtd: autcpu12-nvram: Fix compile breakageAlexander Shiyan1-8/+11
Update driver autcpu12-nvram.c so it compiles; map_read32/map_write32 no longer exist in the kernel so the driver is totally broken. Additionally, map_info name passed to simple_map_init is incorrect. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: stable@vger.kernel.org Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-09-29mtd: omap2: fix some typos in commentsPeter Meerwald1-5/+5
Signed-off-by: Peter Meerwald <p.meerwald@bct-electronic.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-09-29mtd: nand: allow NAND_NO_SUBPAGE_WRITE to be set from driverBrian Norris1-5/+2
The NAND_CHIPOPTIONS_MSK has limited utility and is causing real bugs. It silently masks off at least one flag that might be set by the driver (NAND_NO_SUBPAGE_WRITE). This breaks the GPMI NAND driver and possibly others. Really, as long as driver writers exercise a small amount of care with NAND_* options, this mask is not necessary at all; it was only here to prevent certain options from accidentally being set by the driver. But the original thought turns out to be a bad idea occasionally. Thus, kill it. Note, this patch fixes some major gpmi-nand breakage. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Tested-by: Huang Shijie <shijie8@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-09-29mtd: atmel nand: fix gpio missing requestJean-Christophe PLAGNIOL-VILLARD1-2/+63
without this the gpio will not be muxed as a gpio by the current custom pinmux or later by the pinctrl Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-09-29mtd: docg4: fix oob readsMike Dunn1-27/+6
This patch does two closely related things: (1) Currently the ecc.read_page() method does not fill the nand->oob_poi buffer with the oob data, but instead reads oob into a local buffer. Fix this by filling the oob_poi buffer instead of a local buffer. The 'oob_required' argument is quietly ignored; the device must always read oob after the page data, and it is presumed that there's no harm in filling oob_poi, even when not explicitly requested. (2) Always read oob from the device in ecc.read_oob(), instead of copying it from a local buffer under some circumstances. Signed-off-by: Mike Dunn <mikedunn@newsguy.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-09-29mtd: spear_smi: fix compilation warningArtem Bityutskiy1-1/+1
drivers/mtd/devices/spear_smi.c: In function 'spear_smi_probe': drivers/mtd/devices/spear_smi.c:984:2: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-09-29mtd: spear_smi: failure test for null rather than negative integerJulia Lawall1-1/+1
dev_get_platdata returns a pointer, so the failure value would be NULL rather than a negative integer. The semantic match that finds this problem is: (http://coccinelle.lip6.fr/) // <smpl> @@ expression x,e; statement S1,S2; @@ *x = dev_get_platdata(...) ... when != x = e *if (x < 0) S1 else S2 // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Stefan Roese <sr@denx.de> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-09-29mtd: lpc32xx_mlc: Make driver independent of AMBA DMA engine driverRoland Stigge1-2/+11
This patch makes the MLC NAND driver independent of the single AMBA DMA engine driver by using the platform data provided dma_filter callback. Signed-off-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-09-29mtd: lpc32xx_slc: Make driver independent of AMBA DMA engine driverRoland Stigge1-2/+11
This patch makes the SLC NAND driver independent of the single AMBA DMA engine driver by using the platform data provided dma_filter callback. Signed-off-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-09-29mtd: nand: rename '_raw' BBT scan functionsBrian Norris1-10/+10
None of these scanning functions use MTD_OPS_RAW mode any more, so there's really nothing 'raw' about them. Rename them to (hopefully) make the code a little clearer. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-09-29mtd: nand: use ECC, if present, when scanning OOBBrian Norris1-7/+20
scan_read_raw_oob() is used in only in places where the MTD_OPS_PLACE_OOB mode is preferable to MTD_OPS_RAW mode, so use MTD_OPS_PLACE_OOB instead. MTD_OPS_PLACE_OOB provides the same functionality with the potential[1] added bonus of error correction. This brings scan_block_full() in line with scan_block_fast() so that they both read bad block markers with MTD_OPS_PLACE_OOB. This can help in preventing 0xff markers (in good blocks) from being interpreted as bad block indicators in the presence of a single bitflip. Note that ECC error codes (EUCLEAN or EBADMSG) are already silently ignored in all users of scan_read_raw_oob(). [1] Few drivers perform proper error correction on OOB data. In those cases, the use of MTD_OPS_RAW vs. MTD_OPS_PLACE_OOB is not significant. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-09-29mtd: nand_bbt: use string libraryBrian Norris1-18/+9
Some nand_bbt code can be shortened by using memcmp() and memchr_inv(). As an added bonus, there is a possible performance benefit. Borrowed some code from Akinobu Mita. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-09-29mtd: nand: remove unused 'int' return codesBrian Norris1-11/+8
The return codes for read_abs_bbts() and search_read_bbts() are always non-zero, and so don't have much meaning. Just remove them. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Reviewed-by: Shmulik Ladkani <shmulik.ladkani@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-09-29mtd: check for max_bitflips in mtd_read_oob()Brian Norris1-1/+13
mtd_read_oob() has some unexpected similarities to mtd_read(). For instance, when ops->datbuf != NULL, nand_base.c might return max_bitflips; however, when ops->datbuf == NULL, nand_base's code potentially could return -EUCLEAN (no in-tree drivers do this yet). In any case where the driver might return max_bitflips, we should translate this into an appropriate return code using the bitflip_threshold. Essentially, mtd_read_oob() duplicates the logic from mtd_read(). This prevents users of mtd_read_oob() from receiving a positive return value (i.e., from max_bitflips) and interpreting it as an unknown error. Artem: amend comments. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Reviewed-by: Mike Dunn <mikedunn@newsguy.com> Reviewed-by: Shmulik Ladkani <shmulik.ladkani@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-09-29mtd: m25p80: Fix the Spansion chip detectionMarek Vasut1-5/+5
Due to the implementation of the following loop at the end of jedec_probe(): 776 for (tmp = 0; tmp < ARRAY_SIZE(m25p_ids) - 1; tmp++) { 777 info = (void *)m25p_ids[tmp].driver_data; 778 if (info->jedec_id == jedec) { 779 if (info->ext_id != 0 && info->ext_id != ext_jedec) 780 continue; 781 return &m25p_ids[tmp]; 782 } 783 } In particular line 779 in the above numbering, the chips with ext_id != 0 must be ordered first in the list of chips (m25p_ids[]). Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-09-29mtd: m25p80: add support for Spansion s25sl064p chipMarek Vasut1-0/+1
Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-09-29mtd: gpmi: change the code for clocksHuang Shijie3-18/+112
The gpmi nand driver may needs several clocks(MX6Q needs five clocks). In the old clock framework, all these clocks are chained together, all you need is to manipulate the first clock. But the kernel uses the common clk framework now, which forces us to get the clocks one by one. When we use them, we have to enable them one by one too. Signed-off-by: Huang Shijie <shijie8@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-09-29mtd: sh_flctl: Only copy OOB data if it is requiredBastian Hecht1-1/+2
Check the new oob_required flag and only copy the OOB data to the internal buffer if needed. Signed-off-by: Bastian Hecht <hechtb@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-09-29mtd: sh_flctl: Use memcpy() instead of using a loopBastian Hecht1-6/+7
Elements have been copied "manually" in a loop. Better use memcpy(). Signed-off-by: Bastian Hecht <hechtb@gmail.com> Reviewed-by: Simon Horman <horms@verge.net.au> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-08-22Merge tag 'v3.6-rc2' of ↵David Woodhouse3757-122553/+289007
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux Having missed the merge window, update to 3.6-rc2 to avoid conflicts with new patches. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-08-16Merge tag 'sh-for-linus' of git://github.com/pmundt/linux-shLinus Torvalds1-4/+23
Pull SuperH fixes from Paul Mundt. * tag 'sh-for-linus' of git://github.com/pmundt/linux-sh: sh: intc: Handle domain association for sparseirq pre-allocated vectors. sh: sh7269: Fix LCD pinmux sh: dma: fix request_irq usage
2012-08-16Merge branch 'fixes' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds2-12/+42
Pull two slave-dmaengine fixes from Vinod Koul: "One fixes the correct use of clock API in imx driver and the other enables clock for tegra driver, which is used for other tegra driver conversion to dmanegine in -next." * 'fixes' of git://git.infradead.org/users/vkoul/slave-dma: dma: tegra: enable/disable dma clock dma: imx-dma: Fix kernel crash due to missing clock conversion
2012-08-16Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds11-51/+88
Pull more drm fixes from Dave Airlie: "Just some intel and nouveau ones this time, intel has more edp panel fixes for macbooks and nouveau has a suspend/resume regression fix in there." * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/i915: Apply post-sync write for pipe control invalidates drm/i915: reorder edp disabling to fix ivb MacBook Air drm/nv86/fifo: suspend fix drm/nouveau: disable copy engine on NVAF nouveau: fixup scanout enable in nvc0_pm drm/nouveau/aux: mask off higher bits of auxch index in i2c table entry drm/nvd0/disp: mask off high 16 bit of negative cursor x-coordinate drm/i915: ensure i2c adapter is all set before adding it drm/i915: ignore eDP bpc settings from vbt drm/i915: Fix blank panel at reopening lid drm/nve0/fifo: add support for the flip completion swmthd
2012-08-15Merge branch 'drm-nouveau-fixes' of ↵Dave Airlie6-8/+45
git://git.freedesktop.org/git/nouveau/linux-2.6 into drm-fixes * 'drm-nouveau-fixes' of git://git.freedesktop.org/git/nouveau/linux-2.6: drm/nv86/fifo: suspend fix drm/nouveau: disable copy engine on NVAF nouveau: fixup scanout enable in nvc0_pm drm/nouveau/aux: mask off higher bits of auxch index in i2c table entry drm/nvd0/disp: mask off high 16 bit of negative cursor x-coordinate drm/nve0/fifo: add support for the flip completion swmthd
2012-08-15Merge branch 'drm-intel-fixes' of ↵Dave Airlie5-43/+43
git://people.freedesktop.org/~danvet/drm-intel into drm-fixes Daniel Vetter writes: "A few important fixers: - fix various lvds backlight issues, regressed in 3.6 (Takashi Iwai) - make the retina mbp work (ignore bogus edp bpc value in vbt) - fix a gmbus regression introduced in (iirc) 3.4 (Jani Nikula) - fix an edp panel power sequence regression, fixes the new macbook air - apply the tlb invalidate w/a Otherwise we still have another gmbus regression (patches are awaiting tested-bys) and there's something odd going with some rare systems not entering rc6 often enough (and hence blowing through too much power). It seems to be a timing-related issue and can be mitigated by frobbing the magic tuning parameters. We're still working on that one. Also, we still have some fallout from the hw context support, but you can only hit that with mesa master." * 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel: drm/i915: Apply post-sync write for pipe control invalidates drm/i915: reorder edp disabling to fix ivb MacBook Air drm/i915: ensure i2c adapter is all set before adding it drm/i915: ignore eDP bpc settings from vbt drm/i915: Fix blank panel at reopening lid
2012-08-14drm/i915: Apply post-sync write for pipe control invalidatesChris Wilson1-18/+23
When invalidating the TLBs it is documentated as requiring a post-sync write. Failure to do so seems to result in a GPU hang. Exposure to this hang on IVB seems to be a result of removing the extra stalls required for SNB pipecontrol workarounds: commit 6c6cf5aa9c583478b19e23149feaa92d01fb8c2d Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Fri Jul 20 18:02:28 2012 +0100 drm/i915: Only apply the SNB pipe control w/a to gen6 Note: Manually switch the pipe_control cmd to 4 dwords to avoid a (silent) functional conflict with -next. This way will get a loud (but conflict with next (since the scratch_addr has been deleted there). Reported-and-tested-by: yex.tian@intel.com Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=53322 Acked-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> [danvet: added note about merge conflict with -next.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-14drm/i915: reorder edp disabling to fix ivb MacBook AirDaniel Vetter1-7/+7
eDP is tons of fun. It turns out that at least the new MacBook Air 5,1 model absolutely doesn't like the new force vdd dance we've introduced in commit 6cb49835da0426f69a2931bc2a0a8156344b0e41 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Sun May 20 17:14:50 2012 +0200 drm/i915: enable vdd when switching off the eDP panel But that patch also tried to fix some neat edp sequence issue with the force_vdd timings. Closer inspection reveals that we've raised force_vdd only to do the aux channel communication dp_sink_dpms. If we move the edp_panel_off below that, we don't need any force_vdd for the disable sequence, which makes the Air happy. Unfortunately the reporter of the original bug that the above commit fixed is travelling, so we can't test whether this regresses things. But my theory is that since we don't check for any power-off -> force_vdd-on delays in edp_panel_vdd_on, this was the actual root-cause of this failure. With that force_vdd dance completely eliminated, I'm hopeful the original bug stays fixed, too. For reference the old bug, which hopefully doesn't get broken by this: https://bugzilla.kernel.org/show_bug.cgi?id=43163 In any case, regression fixers win over plain bugfixes, so this needs to go in asap. v2: The crucial pieces seems to be to clear the force_vdd flag uncoditionally, too, in edp_panel_off. Looks like this is left behind by the firmware somehow. v3: The Apple firmware seems to switch off the panel on it's own, hence we still need to keep force_vdd on, but properly clear it when switching the panel off. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=45671 Tested-by: Roberto Romer <sildurin@gmail.com> Tested-by: Daniel Wagner <wagi@monom.org> Tested-by: Keith Packard <keithp@keithp.com> Cc: stable@vger.kernel.org Cc: Keith Packard <keithp@keithp.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-14Merge branch 'for-linus' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 patches from Martin Schwidefsky: "Included are bug fixes and a patch to enable system call filtering with BPF." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/compat: fix mmap compat system calls s390/compat: fix compat wrappers for process_vm system calls s390: do not clobber personality flags in sys_32_personality() s390/seccomp: add support for system call filtering using BPF s390/sclp_sdias: Add missing break and "fall through" s390/mm: remove MAX_PHYSADDR_BITS define
2012-08-14Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds42-239/+511
Pull drm fixes from Dave Airlie: "Radeon and intel fixes mostly, one fix to the mgag200 driver to not hang on certain server variants." * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (32 commits) drm/radeon: fix typo in function header comment drm/radeon/kms: implement timestamp userspace query (v2) drm/radeon/kms: add MSAA texture support for r600-evergreen drm/radeon/kms: reorder code in r600_check_texture_resource drm/radeon: fence virtual address and free it once idle v4 drm/radeon: fix some missing parens in asic macros drm/radeon: add some new SI pci ids drm/radeon: fix ordering in pll picking on dce4+ drm/radeon: do not reenable crtc after moving vram start address drm/radeon: fix bank tiling parameters on cayman drm/radeon: fix bank tiling parameters on evergreen drm/radeon: fix bank tiling parameters on SI drm/radeon: properly handle crtc powergating drm/radeon: properly handle SS overrides on TN (v2) drm/radeon/dce4+: set a more reasonable cursor watermark drm/radeon: fix handling for ddc type 5 on combios drm/mgag200: fix G200ER pll picking algorithm drm/edid: Fix potential memory leak in edid_load() drm/udl: Use ERR_CAST inlined function instead of ERR_PTR(PTR_ERR(.. [1] drm/radeon/kms: allow "invalid" DB formats as a means to disable DB ...
2012-08-14GPIO: gpio-pxa: fix building without CONFIG_OFArnd Bergmann1-2/+2
Commit 7212157267 ("GPIO: gpio-pxa: fix devicetree functions") added an "xlate" function pointer to the irq_domain_ops, but this function is nor declared or defined anywhere when CONFIG_OF is disabled, causing the build error: drivers/gpio/gpio-pxa.c:532:11: error: 'irq_domain_xlate_twocell' undeclared here (not in a function) Extending the DT-only code section to cover the irq_domain_ops and the pxa_gpio_dt_ids solves this problem and makes it clearer which code is actually used without DT. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-08-14drm/nv86/fifo: suspend fixMaxim Levitsky1-0/+9
This fix is a backport from the reworked nouveau driver. It masks off the engines we're not expecting to use before attempting a channel kickoff. Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-08-14drm/nouveau: disable copy engine on NVAFHenrik Rydberg1-1/+0
The copy engine exhibits random memory corruption in at least one case, the GeForce 320M (nv50, 0xaf) in the MacBookAir3,1. This patch omits creating the engine for the specific chipset, falling back to M2MF, which kills the symptoms. Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-08-14nouveau: fixup scanout enable in nvc0_pmMaarten Lankhorst1-1/+1
Fixes screen being black after changing performance level. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com> Cc: stable@vger.kernel.org [3.5+] Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-08-14drm/nouveau/aux: mask off higher bits of auxch index in i2c table entryBen Skeggs1-1/+1
At least partially fixes DP output detection on W530. Not sure if more issues remain, or if my adaptor is just behaving weirdly (it does that sometimes). In any case, this patch is necessary. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-08-14drm/nvd0/disp: mask off high 16 bit of negative cursor x-coordinateChristoph Bumiller1-1/+1
Signed-off-by: Christoph Bumiller <e0425955@student.tuwien.ac.at> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Cc: stable@vger.kernel.org
2012-08-13drm/i915: ensure i2c adapter is all set before adding itJani Nikula1-3/+4
i2c_add_adapter() may do i2c transfers on the bus to detect supported devices. Therefore the adapter needs to be all set before adding it. This was not the case for the bit-banging fallback, resulting in an oops if the device detection GMBUS transfers timed out. Fix the issue by calling i2c_add_adapter() only after intel_gpio_setup(). LKML-Reference: <5021F00B.7000503@ionic.de> Tested-by: Mihai Moldovan <ionic@ionic.de> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-13drm/radeon: fix typo in function header commentDmitrii Cherkasov1-1/+1
Signed-off-by: Dmitrii Cherkasov <DCherkasov@luxsoft.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-08-13drm/radeon/kms: implement timestamp userspace query (v2)Marek Olšák9-7/+80
Returns a snapshot of the GPU clock counter. Needed for certain OpenGL extensions. v2: agd5f - address Jerome's comments - add function documentation Signed-off-by: Marek Olšák <maraeo@gmail.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-16 12:57:52 +0300