summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2012-02-16sfc: Correct MAC filter bitfield definitionsBen Hutchings1-10/+10
The RMFT_DEST_MAC and TMFT_SRC_MAC register fields were previously documented as 44 bits wide, whereas a MAC address has 48 bits. Thankfully the hardware uses the correct width and the driver has used separate definitions that divide each of these into 32-bit and 16-bit fields. Fix the initial definitions for these fields and rewrite the latter definitions to use them. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-16sfc: Add support for TX MAC filtersBen Hutchings2-5/+72
On Siena each TX queue can be configured to send only packets for which there is a TX MAC filter that matches the source MAC address, queue ID, and optionally VID. This will be used to implement the 'spoofchk' feature for SR-IOV virtual functions. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-16sfc: Add support for configuring RX unicast/multicast default filtersBen Hutchings3-47/+214
On Siena all received packets that don't match a more specific filter will match the unicast or multicast default filter. Currently we leave these set to the default values (RSS with base queue number of 0). Allow them to be reconfigured to select a single RX queue. These default filters are programmed through the FILTER_CTL register, but we represent them internally as an additional table of size 2. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-16cxgb3: update firmware versionDivy Le Ray1-2/+2
Hi Dave, This patch is sent in conjunction with the cxgb3 firmware update submission on linux-firmware. (https://lkml.org/lkml/2012/2/13/27) Cheers, Divy From: Divy Le Ray <divy@chelsio.com> This patch updates the firmware version cxgb3 is requesting to 7.12.0. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-16net/ethernet: ks8851_mll fix irq handlingJan Weitzel1-8/+6
There a two different irq variables ks->irq and netdev->irq. Only ks->irq is set on probe, so disabling irq in ks_start_xmit fails. This patches remove ks->irq from private data and use only netdev->irq. Tested on a kernel 3.0 based OMAP4430 SMP Board Signed-off-by: Jan Weitzel <j.weitzel@phytec.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-16renesas/sh_eth.c: fix linux/interrupt.h included twiceDanny Kukawka1-1/+0
Remove double include of linux/interrupt.h. Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-16net: use eth_hw_addr_random() and reset addr_assign_typeDanny Kukawka14-12/+25
Use eth_hw_addr_random() instead of calling random_ether_addr() to set addr_assign_type correctly to NET_ADDR_RANDOM. Reset the state to NET_ADDR_PERM as soon as the MAC get changed via .ndo_set_mac_address. v2: adapt to renamed eth_hw_addr_random() Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-16net: replace random_ether_addr() with eth_hw_addr_random()Danny Kukawka22-25/+24
Replace usage of random_ether_addr() with eth_hw_addr_random() to set addr_assign_type correctly to NET_ADDR_RANDOM. Change the trivial cases. v2: adapt to renamed eth_hw_addr_random() Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-16bnx2x: allow all functions to display the phy FW versionMintz Yuval3-12/+6
The phy FW version is stored in regular memory, no MDC-MDIO access or any special locks are required to read it in the current implementation. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-16bnx2x: removed code re-checking memory base after device openMintz Yuval1-11/+0
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-16bnx2x: allow BCM84833 phy to advertise 100Base-T speedsMintz Yuval1-0/+5
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-16bnx2x: notify cnic of address of info-to-the-mcpMintz Yuval1-0/+5
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-16bnx2x: allocate smaller Rx rings for 1G functionsMintz Yuval1-0/+7
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-16bnx2x: allocate memory dynamically in ethtool self-test.Mintz Yuval1-2/+11
From: Merav Sicron <meravs@broadcom.com> Current ethtool self tests usesa large buffer on stack. This patch replaces that array by dynamically allocated memory Signed-off-by: Merav Sicron <meravs@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-16bnx2x: force 10G on 84833 phy should be autoneg with only 10G advertisedMintz Yuval1-8/+1
From: Yaniv Rosner <yaniv.rosner@broadcom.com> Signed-off-by: Yaniv Rosner <yaniv.rosner@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-16bnx2x: added autoneg-restart after link advertisement changesMintz Yuval1-1/+1
From: Yaniv Rosner <yaniv.rosner@broadcom.com> Signed-off-by: Yaniv Rosner <yaniv.rosner@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-16bnx2x: ethtool publishes link partners speed and FCMintz Yuval3-79/+272
Following the changes in the ethtool source code, this patch enables the bnx2x driver to publish the Link partner's capabilities s, when ethtool is used on an interface which completed autoneg. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Yaniv Rosner <yaniv.rosner@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-16bnx2x: half duplex support added for several boardsMintz Yuval2-0/+4
From: Yaniv Rosner <yaniv.rosner@broadcom.com> Several boards require an additional HW bit written in-order to enable half duplex. Signed-off-by: Yaniv Rosner <yaniv.rosner@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-16bnx2x: consistent statistics after internal driver reloadMintz Yuval6-236/+374
Currently bnx2x statistics are reset by inner driver reload, e.g. by MTU change. This patch fixes this issue - from now on statistics should only be reset upon device closure. Thanks to Michal Schmidt <mschmidt@redhat.com> for his initial patch regarding this issue. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-15veth: Enforce minimum size of VETH_INFO_PEERThomas Graf1-1/+3
VETH_INFO_PEER carries struct ifinfomsg plus optional IFLA attributes. A minimal size of sizeof(struct ifinfomsg) must be enforced or we may risk accessing that struct beyond the limits of the netlink message. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-15stmmac: update the driver version to Feb 2012 (v2)Giuseppe CAVALLARO1-1/+1
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-15stmmac: move hw init in the probe (v2)Giuseppe CAVALLARO4-116/+105
This patch moves the MAC HW initialization and the HW feature verification from the open to the probe function as D. Miller suggested. So the patch actually reorganizes and tidies-up some parts of the driver and indeed fixes some problem when tune its HW features. These can be overwritten by looking at the HW cap register at run-time and that generated problems. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Reviewed-by: Francesco Virlinzi <francesco.virlinzi@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-15stmmac: request_irq when use an ext wake irq line (v2)Francesco Virlinzi1-0/+16
In case of we use an external Wake-Up IRQ line (priv->wol_irq != dev->irq) we need to invoke the request_irq. Signed-off-by: Francesco Virlinzi <francesco.virlinzi@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-15stmmac: do not discard frame on dribbling bit assertGiuseppe CAVALLARO4-3/+9
If this bit is set and the CRC error is reset, then the packet is valid. Only report this as stat info. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-15ipheth: Add iPhone 4STim Gardner1-0/+5
BugLink: http://bugs.launchpad.net/bugs/900802 Cc: stable@vger.kernel.org 3.2+ Signed-off-by: Till Kamppeter <till.kamppeter@gmail.com> Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-15mlx4: add unicast steering entries to resource_trackerEugenia Emantayev1-7/+11
Add unicast steering entries to resource tracker. Do qp_detach also for these entries when VF doesn't shut down gracefully. Otherwise there is leakage of these resources, since they are not tracked. Signed-off-by: Eugenia Emantayev <eugenia@mellanox.co.il> Reviewed-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-15mlx4: fix QP tree trashingEugenia Emantayev1-0/+1
When adding new unicast steer entry, before moving qp to state ready, actually before calling mlx4_RST2INIT_QP_wrapper(), there were added a lot of entries with local_qpn=0 into radix tree. This fact impacted the get_res() function and proper functioning of resource tracker in addition to adding trash entries into radix tree. Signed-off-by: Eugenia Emantayev <eugenia@mellanox.co.il> Reviewed-by: Yevgeny Petrilin <yevgenyp@melllanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-15mlx4: fix buffer overrunEugenia Emantayev1-1/+1
When passing MLX4_UC_STEER=1 it was translated to value 2 after mlx4_QP_ATTACH_wrapper. Therefore in new_steering_entry() unicast steer entries were added to index 2 of array of size 2. Fixing this bug by shift right to one position. Signed-off-by: Eugenia Emantayev <eugenia@mellanox.co.il> Reviewed-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-15Merge branch 'master' of ↵John W. Linville1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2012-02-15regmap: Fix cache defaults initialization from raw cache defaultsLars-Peter Clausen1-2/+2
Currently registers with a value of 0 are ignored when initializing the register defaults from raw defaults. This worked in the past, because registers without a explicit default were assumed to have a default value of 0. This was changed in commit b03622a8 ("regmap: Ensure rbtree syncs registers set to zero properly"). As a result registers, which have a raw default value of 0 are now assumed to have no default. This again can result in unnecessary writes when syncing the cache. It will also result in unnecessary reads for e.g. the first update operation. In the case where readback is not possible this will even let the update operation fail, if the register has not been written to before. So this patch removes the check. Instead it adds a check to ignore raw defaults for registers which are volatile, since those registers are not cached. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
2012-02-15Merge tag 'for-linus' of ↵Linus Torvalds2-1/+3
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator One small bug fix from Axel plus a fix for a build failure in unrealistic but commonly built configs which for some reason manage to survive for an awfully long time in -next without any reports. * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: Fix getting voltage in max8649_enable_time() regulator: Fix mc13xxx regulator modular build (again)
2012-02-15Merge tag 'mmc-fixes-for-3.3-rc4' of ↵Linus Torvalds17-131/+241
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc MMC fixes for 3.3-rc4: * The most visible fix here is against a regression introduced in 3.3-rc1 that ran cards in Ultra High Speed mode even when they failed to initialize in that mode, leading to lower-speed cards failing to mount. * A lockdep warning introduced in 3.3-rc1 is fixed. * Various other small driver fixes, most notably for a NULL dereference when using highmem with dw_mmc. * tag 'mmc-fixes-for-3.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: mmc: dw_mmc: Fix PIO mode with support of highmem mmc: atmel-mci: save and restore sdioirq when soft reset is performed mmc: block: Init ro_lock sysfs attr to fix lockdep warnings mmc: sh_mmcif: fix late delayed work initialisation mmc: tmio_mmc: fix card eject during IO with DMA mmc: core: Fix comparison issue in mmc_compare_ext_csds mmc: core: Fix PowerOff Notify suspend/resume mmc: sdhci-pci: set Medfield SDIO as non-removable mmc: core: add the capability for broken voltage mmc: core: Fix low speed mmc card detection failure mmc: esdhc: set the timeout to the max value mmc: esdhc: add PIO mode support mmc: core: Ensure clocks are always enabled before host interaction mmc: of_mmc_spi: fix little endian support mmc: core: UHS sdio card that fails should not exceed 50MHz mmc: esdhc: fix errors when booting kernel on Freescale eSDHC version 2.3
2012-02-15Merge tag 'stable/for-linus-fixes-3.3-rc3' of ↵Linus Torvalds5-12/+18
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Two fixes for VCPU offlining; One to fix the string format exposed by the xen-pci[front|back] to conform to the one used in majority of PCI drivers; Two fixes to make the code more resilient to invalid configurations. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> * tag 'stable/for-linus-fixes-3.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xenbus_dev: add missing error check to watch handling xen/pci[front|back]: Use %d instead of %1x for displaying PCI devfn. xen pvhvm: do not remap pirqs onto evtchns if !xen_have_vector_callback xen/smp: Fix CPU online/offline bug triggering a BUG: scheduling while atomic. xen/bootup: During bootup suppress XENBUS: Unable to read cpu state
2012-02-153c59x: shorten timer period for slave devicesEric Dumazet1-1/+1
Jean Delvare reported bonding on top of 3c59x adapters was not detecting network cable removal fast enough. 3c59x indeed uses a 60 seconds timer to check link status if carrier is on, and 5 seconds if carrier is off. This patch reduces timer period to 5 seconds if device is a bonding slave. Reported-by: Jean Delvare <jdelvare@suse.de> Acked-by: Jean Delvare <jdelvare@suse.de> Acked-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-14bnx2x: remove the 'poll' module optionMichal Schmidt1-16/+1
'poll' was a debugging option, but turning it on these days leads to kernel panic. Remove it. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-14mlx4: add unicast steering entries to resource_trackerEugenia Emantayev1-7/+11
Add unicast steering entries to resource tracker. Do qp_detach also for these entries when VF doesn't shut down gracefully. Otherwise there is leakage of these resources, since they are not tracked. Signed-off-by: Eugenia Emantayev <eugenia@mellanox.co.il> Reviewed-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-14mlx4: attach multicast with correct flagEugenia Emantayev1-12/+4
mlx4_multicast_attach/detach() should use always MLX4_MC_STEER flag Signed-off-by: Eugenia Emantayev <eugenia@mellanox.co.il> Reviewed-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-14mlx4: remove redundant adding of steering type to gidEugenia Emantayev1-2/+0
mlx4_uc_steer_add/release() should not add MLX4_UC_STEER flag to gid. It is added in mlx4_unicast_attach/detach(). Signed-off-by: Eugenia Emantayev <eugenia@mellanox.co.il> Reviewed-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-14mlx4: remove unnecessary variables and argumentsEugenia Emantayev1-12/+10
mlx4_qp_attach/detach_common() don't use hash variable, move it to find_entry() static find_entry() in mcg.c doesn't use steer argument Signed-off-by: Eugenia Emantayev <eugenia@mellanox.co.il> Reviewed-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-14mlx4: remove unused field high_priosEugenia Emantayev2-4/+1
Remove unnecessary field high_prios from mlx4_steer struct and initialization Signed-off-by: Eugenia Emantayev <eugenia@mellanox.co.il> Reviewed-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-14mlx4: fix QP tree trashingEugenia Emantayev1-0/+1
When adding new unicast steer entry, before moving qp to state ready, actually before calling mlx4_RST2INIT_QP_wrapper(), there were added a lot of entries with local_qpn=0 into radix tree. This fact impacted the get_res() function and proper functioning of resource tracker in addition to adding trash entries into radix tree. Signed-off-by: Eugenia Emantayev <eugenia@mellanox.co.il> Reviewed-by: Yevgeny Petrilin <yevgenyp@melllanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-14mlx4_core: fix buffer overrunEugenia Emantayev1-1/+1
When passing MLX4_UC_STEER=1 it was translated to value 2 after mlx4_QP_ATTACH_wrapper. Therefore in new_steering_entry() unicast steer entries were added to index 2 of array of size 2. Fixing this bug by shift right to one position. Signed-off-by: Eugenia Emantayev <eugenia@mellanox.co.il> Reviewed-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-14drm/radeon/kms: fix MSI re-arm on rv370+Alex Deucher2-6/+2
MSI_REARM_EN register is a write only trigger register. There is no need RMW when re-arming. May fix: https://bugs.freedesktop.org/show_bug.cgi?id=41668 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> CC: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-14drm/radeon/kms/atom: bios scratch reg handling updatesAlex Deucher1-0/+17
- Add missing DFP6 connection state handling - crtc routing bits not used on DCE4+ Noticed by sylware on phoronix. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-14drm/radeon/kms: drop lock in return path of radeon_fence_count_emitted.Dave Airlie1-1/+3
Silly bad return path. Reported-and-Tested-by: Mikko Vinni Reviewed-by: Alex Deucher <alexander.deucher@amd.com> CC: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-14tg3: Update copyrightMatt Carlson2-2/+2
This patch updates the copyright dates in the tg3 driver. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-14tg3: Use *_UNKNOWN ethtool definitionsMatt Carlson2-23/+20
This patch replaces tg3's private SPEED_INVALID and DUPLEX_INVALID definitions with SPEED_UNKNOWN and DUPLEX_UNKNOWN respectively. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-14tg3: Remove unneeded link_config.orig_... membersMatt Carlson2-35/+12
This patch removes the unneeded link_config.orig_* members. When the phy is in a low power state, the TG3_PHYFLG_IS_LOW_POWER flag solely determines how the link is configured. When the phy is powered back up, it can resume using the original settings. For the phylib case, the link configuration still needs to be saved, but since the phylib maintains its own configuration, we can repurpose the (unused in this case) tg3 link configuration members. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-14tg3: Remove unused link config codeMatt Carlson1-5/+1
When tg3 devices are shutdown, the driver uses the TG3_PHYFLG_IS_LOW_POWER flag to enable a static phy configuration. Any attempt to use the link configuration variables is dead code. This patch removes such code. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-14tg3: Consolidate ASIC rev detection codeMatt Carlson1-80/+79
Detecting the ASIC revision of a device is getting to be an increasingly complex process. This patch consolidates all the ASIC rev detection code to a single routine for better maintainability. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-01 12:43:16 +0300