summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2015-09-30dmaengine: xgene-dma: Fix overwritting DMA tx ringRameshwar Prasad Sahu1-26/+11
This patch fixes an over flow issue with the TX ring descriptor. Each descriptor is 32B in size and an operation requires 2 of these descriptors. Signed-off-by: Rameshwar Prasad Sahu <rsahu@apm.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-09-30dmaengine: fix balance of privatecntPeter Ujfalusi1-1/+9
dma_release_channel() decrements privatecnt counter and almost all dma_get* function increments it with the exception of dma_get_slave_channel(). In most cases this does not cause issue since normally the channel is not requested and released, but if a driver requests DMA channel via dma_get_slave_channel() and releases the channel the privatecnt will be unbalanced and this will prevent for example getting channel for memcpy. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-09-30drm/exynos: rotator: Clock control is unused if !PMThierry Reding1-1/+1
Protect the rotator_clk_crtl() function with an #ifdef CONFIG_PM guard to avoid "defined but not used" warnings. Signed-off-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-09-30drm/exynos: fimc: Clock control is unused if !PMThierry Reding1-18/+18
Protect the fimc_clk_ctrl() function with an #ifdef CONFIG_PM guard to avoid "defined but not used" warnings. Signed-off-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-09-30drm/exynos: Suspend/resume is unused if !PMThierry Reding1-0/+2
Protect the suspend and resume callbacks with an #ifdef CONFIG_PM_SLEEP guard to avoid "defined but not used" warnings. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-09-30drm/exynos: create a fake mmap offset with gem creationJoonyoung Shim1-5/+7
Don't create a fake mmap offset in exynos_drm_gem_dumb_map_offset. If not, it will call drm_gem_create_mmap_offset whenever user requests DRM_IOCTL_MODE_MAP_DUMB ioctl. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-09-30drm/exynos: remove call to drm_gem_free_mmap_offset()Joonyoung Shim1-3/+0
The drm_gem_object_release() function already performs this cleanup, so there is no reason to do it explicitly. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-09-30drm/exynos: Remove useless EXPORT_SYMBOL_GPLsDaniel Kurtz2-9/+0
All the user of these functions are inside exynos-drm driver and you don't need to export the symbols for that case. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-09-30drm/exynos: cleanup line feed in exynos_drm_gem_get_ioctlJoonyoung Shim1-1/+2
The beginning of statement in function is next line of a brace. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-09-30drm/exynos: cleanup function calling written twiceJoonyoung Shim1-33/+23
By if statment, some function callings are written twice. It needs several line feed by indentation in if statment. Make to one function calling from outside if statment. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-09-30drm/exynos: staticize exynos_drm_gem_init()Joonyoung Shim2-6/+1
The exynos_drm_gem_init() is used only in exynos_drm_gem.c file. Make it static and don't export it. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-09-30drm/exynos: remove unnecessary NULL assignmentJoonyoung Shim1-3/+0
They will be freed right or was freed already, so NULL assignment is unnecessary. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-09-30drm/exynos: fix missed calling of drm_prime_gem_destroy()Joonyoung Shim2-4/+7
When obj->import_attach is existed, code calling drm_prime_gem_destroy() was removed from commit 67e93c808b48 ("drm/exynos: stop copying sg table"), and it's a fault. The drm_prime_gem_destroy() is cleanup function which GEM drivers need to call when they use drm_gem_prime_import() to import dma-bufs, so exynos-drm driver using drm_gem_prime_import() needs calling drm_prime_gem_destroy(). Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-09-30drm/exynos: fix layering violation of addressJoonyoung Shim1-1/+2
There is no guarantee that DMA addresses are the same as physical addresses, but dma_to_pfn() knows how to convert a dma_addr_t to a PFN which can then be converted to a struct page. Suggested-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-09-30dmaengine: sun4i: fix unsafe list iterationEmilio López1-3/+3
Currently, sun4i_dma_free_contract iterates over lists and frees memory as it goes through them, causing reads to recently freed memory to be performed. Fix this by using the safe version of the iterator, so freed memory is not referenced at all. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Emilio López <emilio@elopez.com.ar> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-09-30net/mlx4: Handle return codes in mlx4_qp_attach_commonRobb Manes1-3/+4
Both new_steering_entry() and existing_steering_entry() return values based on their success or failure, but currently they fall through silently. This can make troubleshooting difficult, as we were unable to tell which one of these two functions returned errors or specifically what code was returned. This patch remedies that situation by passing the return codes to err, which is returned by mlx4_qp_attach_common() itself. This also addresses a leak in the call to mlx4_bitmap_free() as well. Signed-off-by: Robb Manes <rmanes@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-30dsa: mv88e6xxx: Enable forwarding for unknown to the CPU portAndrew Lunn1-0/+2
Frames destined to an unknown address must be forwarded to the CPU port. Otherwise incoming ARP, dhcp leases, etc, do not work. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-30Input: add DA9062 OnKey capability to DA9063 OnKey driverS Twiss2-29/+108
Add DA9062 OnKey support into the existing DA9063 OnKey driver component by using generic access tables for common register and bit mask definitions. The following change will add generic register and bit mask support to the DA9063 OnKey. The following alterations have been made to the DA9063 OnKey: - Addition of a da906x_chip_config structure to hold all generic registers and bitmasks for this type of OnKey component. - Addition of an struct of_device_id table for DA9063 and DA9062 defaults - Refactoring functions to use struct da9063_onkey accesses to generic registers/masks instead of using defines from registers.h - Re-work of da9063_onkey_probe() to use of_match_node() and dev_get_regmap() to provide initialisation of generic registers and masks and access to regmap Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-09-30Merge tag 'v4.3-rc3' into nextDmitry Torokhov5311-147751/+386183
Merge with Linux 4.3-rc3 to bring in MFD DA9062 changes to merge DA9062 OnKey driver.
2015-09-30Input: walkera0701 - use parallel port device modelSudip Mukherjee1-27/+37
Modify walkera0701 driver to use the new Parallel Port device model. Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-09-30Input: turbografx - use parallel port device modelSudip Mukherjee1-49/+51
Modify turbografx driver to use the new Parallel Port device model. Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-09-30Input: gamecon - use parallel port device modelSudip Mukherjee1-47/+53
Modify gamecon driver to use the new Parallel Port device model. Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-09-30Input: ff-core - silence an underflow warningDan Carpenter1-2/+2
My static checker complains that "value" comes from the user in evdev_do_ioctl() and we check that it's not too large here but we don't check that it's negative. It's harmless because the ->set_gain() and ->set_autocenter() functions truncate it to a valid u16 value, but we may as well fix it just to make the static checker happy. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-09-30Input: psmouse - fix data race in __ps2_commandDmitry Vyukov1-8/+14
The data race happens on ps2dev->cmdcnt and ps2dev->cmdbuf contents. __ps2_command reads that data concurrently with the interrupt handler. As the result, for example, if a response arrives just after the timeout, __ps2_command can copy out garbage from ps2dev->cmdbuf but then see that ps2dev->cmdcnt is 0 and return success. Stop the interrupt handler with serio_pause_rx() before reading the results. The data race was found with KernelThreadSanitizer (KTSAN). Signed-off-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-09-29bna: fix error handlingAndrzej Hajda1-6/+7
Several functions can return negative value in case of error, so their return type should be fixed as well as type of variables to which this value is assigned. The problem has been detected using proposed semantic patch scripts/coccinelle/tests/assign_signed_to_unsigned.cocci [1]. [1]: http://permalink.gmane.org/gmane.linux.kernel/2046107 Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-29drm/amdgpu: Restore LCD backlight level on resumeAlex Deucher1-2/+1
Instead of only enabling the backlight (which seems to set it to max brightness), just re-set the current backlight level, which also takes care of enabling the backlight if necessary. Port of radeon commit: drm/radeon: Restore LCD backlight level on resume (>= R5xx) Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2015-09-29drm/radeon: Restore LCD backlight level on resume (>= R5xx)Michel Dänzer1-4/+4
Instead of only enabling the backlight (which seems to set it to max brightness), just re-set the current backlight level, which also takes care of enabling the backlight if necessary. Only the radeon_atom_encoder_dpms_dig part tested on a Kaveri laptop, the radeon_atom_encoder_dpms_avivo part is only compile tested. Cc: stable@vger.kernel.org Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-09-29drm/amdgpu: signedness bug in amdgpu_cs_parser_init()Dan Carpenter1-1/+2
The "i" variable should be signed or it leads to a crash in the error handling code. Fixes: 1d263474c441 ('drm/amdgpu: unwind properly in amdgpu_cs_parser_init()') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-09-29clocksource/drivers/keystone: Fix bad NO_IRQ usageDaniel Lezcano1-1/+1
The current code assumes the 'irq_of_parse_and_map' will return NO_IRQ in case of failure. Unfortunately, the NO_IRQ is not consistent across the different architectures and we must not rely on it. NO_IRQ is equal to '-1' on ARM and 'irq_of_parse_and_map' returns '0' in case of an error. Hence, the latter won't be detected and will lead to a crash. Fix this by just checking 'irq' is different from zero. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-09-29clocksource/drivers/rockchip: Fix bad NO_IRQ usageDaniel Lezcano1-1/+1
The current code assumes the 'irq_of_parse_and_map' will return NO_IRQ in case of failure. Unfortunately, the NO_IRQ is not consistent across the different architectures and we must not rely on it. NO_IRQ is equal to '-1' on ARM and 'irq_of_parse_and_map' returns '0' in case of an error. Hence, the latter won't be detected and will lead to a crash. Fix this by just checking 'irq' is different from zero. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-09-29UBI: return ENOSPC if no enough space availableshengyong2-0/+2
UBI: attaching mtd1 to ubi0 UBI: scanning is finished UBI error: init_volumes: not enough PEBs, required 706, available 686 UBI error: ubi_wl_init: no enough physical eraseblocks (-20, need 1) UBI error: ubi_attach_mtd_dev: failed to attach mtd1, error -12 <= NOT ENOMEM UBI error: ubi_init: cannot attach mtd1 If available PEBs are not enough when initializing volumes, return -ENOSPC directly. If available PEBs are not enough when initializing WL, return -ENOSPC instead of -ENOMEM. Cc: stable@vger.kernel.org Signed-off-by: Sheng Yong <shengyong1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at> Reviewed-by: David Gstir <david@sigma-star.at>
2015-09-29UBI: Validate data_sizeRichard Weinberger1-0/+5
Make sure that data_size is less than LEB size. Otherwise a handcrafted UBI image is able to trigger an out of bounds memory access in ubi_compare_lebs(). Cc: stable@vger.kernel.org Signed-off-by: Richard Weinberger <richard@nod.at> Reviewed-by: David Gstir <david@sigma-star.at>
2015-09-29mmc: pxamci: fix card detect with slot-gpio APIRobert Jarzmik1-44/+22
Move pxamci to mmc slot-gpio API to fix interrupt request. It fixes the case where the card detection is on a gpio expander, on I2C for example on zylonite board. In this case, the card detect netsted interrupt is called from a threaded interrupt. The request_irq() fails, because a hard irq cannot be a nested interrupt from a threaded interrupt (set __setup_irq()). This was tested on zylonite and mioa701 boards. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Cc: Petr Cvek <petr.cvek@tul.cz> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-09-29mmc: sunxi: Fix clk-delay settingsHans de Goede1-14/+39
In recent allwinner kernel sources the mmc clk-delay settings have been slightly tweaked, and for sun9i they are completely different then what we are using. This commit brings us in sync with what allwinner does, fixing problems accessing sdcards on some A33 devices (and likely others). For pre sun9i hardware this makes the following changes: -At 400Khz change the sample delay from 7 to 0 (introduced in A31 sdk) -At 50 Mhz change the sample delay from 5 to 4 (introduced in A23 sdk) This also drops the clk-delay calculation for clocks > 50 MHz, we do not need this as we've: mmc->f_max = 50000000, and the delays in the old code were not correct (at 100 MHz the delay must be a multiple of 60, at 200 MHz a multiple of 120). Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-09-29mmc: core: Don't return an error for CD/WP GPIOs when GPIOLIB is unsetUlf Hansson1-2/+2
When CONFIG_GPIOLIB is unset, its stubs will return -ENOSYS. That means when the mmc core parses DT for CD/WP GPIOs via mmc_of_parse(), -ENOSYS becomes propagated to the caller. Typically this means that the mmc host driver fails to probe. As the CD/WP GPIOs are already treated as optional, let's extend that to cover the case when CONFIG_GPIOLIB is unset. Reported-by: Michal Simek <michal.simek@xilinx.com> Fixes: 16b23787fc70 ("mmc: sdhci-of-arasan: Call OF parsing for MMC") Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Venu Byravarasu <vbyravarasu@nvidia.com>
2015-09-29net/ibm/emac: bump version numbers for correct work with ethtoolIvan Mikhaylov1-3/+3
The size of the MAC register dump used to be the size specified by the reg property in the device tree. Userland has no good way of finding out that size, and it was not specified consistently for each MAC type, so ethtool would end up printing junk at the end of the register dump if the device tree didn't match the size it assumed. Using the new version numbers indicates unambiguously that the size of the MAC register dump is dependent only on the MAC type. Fixes: 5369c71f7ca2 ("net/ibm/emac: fix size of emac dump memory areas") Signed-off-by: Ivan Mikhaylov <ivan@ru.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-29i40e/i40evf: check for stopped admin queueMitch Williams2-0/+18
It's possible that while we are waiting for the spinlock, another entity (that owns the spinlock) has shut down the admin queue. If we then attempt to use the queue, we will panic. Add a check for this condition on the receive side. This matches an existing check on the send queue side. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-29i40e: fix VLAN inside VXLANJesse Brandeburg1-1/+2
Previously to this patch, the hardware was removing VLAN tags from the inner header of VXLAN packets. The hardware configuration can be changed to leave the packet alone since that is what the linux stack expects for this type of VLAN in VXLAN packet. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-29Input: elan_i2c - add all valid ic type for i2c/smbusduson1-1/+10
Signed-off-by: Duson Lin <dusonlin@emc.com.tw> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-09-29Input: zhenhua - ensure we have BITREVERSEAndrew Morton1-0/+1
It uses bitrev8(), so it must ensure that lib/bitrev.o gets included in vmlinux. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-09-29Input: omap4-keypad - fix memory leakSudip Mukherjee1-1/+1
If omap4_keypad_parse_dt() fails we returned the error code but we missed releasing keypad_data. Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-09-29Input: db9 - use parallel port device modelSudip Mukherjee1-54/+56
Modify db9 driver to use the new Parallel Port device model. Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Tested-By: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-09-29Input: omap4-keypad - fix memory leakSudip Mukherjee1-1/+1
If omap4_keypad_parse_dt() fails we returned the error code but we missed releasing keypad_data. Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-09-28drm/i915: Consider HW CSB write pointer before resetting the sw read pointerMichel Thierry2-7/+34
A previous commit resets the Context Status Buffer (CSB) read pointer in ring init commit c0a03a2e4c4e ("drm/i915: Reset CSB read pointer in ring init") This is generally correct, but this pointer is not reset after suspend/resume in some platforms (cht). In this case, the driver should read the register value instead of resetting the sw read counter to 0. Otherwise we process old events, leading to unwanted pre-emptions or something worse. But in other platforms (bdw) and also during GPU reset or power up, the CSBWP is reset to 0x7 (an invalid number), and in this case the read pointer should be set to 5 (the interrupt code will increment this counter one more time, and will start reading from CSB[0]). v2: When the CSB registers are reset, the read pointer needs to be set to 5, otherwise the first write (CSB[0]) won't be read (Mika). Replace magic numbers with GEN8_CSB_ENTRIES (6) and GEN8_CSB_PTR_MASK (0x07). Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: stable@vger.kernel.org # v4.0+ Signed-off-by: Lei Shen <lei.shen@intel.com> Signed-off-by: Deepak S <deepak.s@intel.com> Signed-off-by: Michel Thierry <michel.thierry@intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-09-28watchdog: iTCO: Fix dependencies on I2CGuenter Roeck1-1/+2
If I2C is built as module, the iTCO watchdog driver must be built as module as well. I2C_I801 must only be selected if I2C is configured. This fixes the following build errors, seen if I2C=m and ITCO_WDT=y. i2c-i801.c:(.text+0x2bf055): undefined reference to `i2c_del_adapter' i2c-i801.c:(.text+0x2c13e0): undefined reference to `i2c_add_adapter' i2c-i801.c:(.text+0x2c17bd): undefined reference to `i2c_new_device' Fixes: 2a7a0e9bf7b3 ("watchdog: iTCO_wdt: Add support for TCO on Intel Sunrisepoint") Reviewed-by: Matt Fleming <matt.fleming@intel.com> Cc: Lee Jones <lee.jones@linaro.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-09-28watchdog: bcm2835: Fix poweroff behaviourNoralf Trønnes1-2/+8
Currently poweroff/halt results in a reboot on the Raspberry Pi. The firmware uses the RSTS register to know which partiton to boot from. The partiton value is spread into bits 0, 2, 4, 6, 8, 10. Partiton 63 is a special partition used by the firmware to indicate halt. The firmware made this change in 19 Aug 2013 and was matched by the downstream commit: Changes for new NOOBS multi partition booting from gsh Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Tested-by: Stephen Warren <swarren@wwwdotorg.org> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-09-28watchdog: Fix module autoload for OF platform driverLuis de Bethencourt3-0/+3
These platform drivers have a OF device ID table but the OF module alias information is not created so module autoloading won't work. Signed-off-by: Luis de Bethencourt <luis@debethencourt.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-09-28drm/i915/skl: Don't call intel_prepare_ddi when encoder list isn't yet ↵Rodrigo Vivi1-1/+2
initialized. In case something goes wrong with power well initialization we were calling intel_prepare_ddi during boot while encoder list isnt't initilized. [ 9.618747] i915 0000:00:02.0: Invalid ROM contents [ 9.631446] [drm] failed to find VBIOS tables [ 9.720036] BUG: unable to handle kernel NULL pointer dereference at 00000000 00000058 [ 9.721986] IP: [<ffffffffa014eb72>] ddi_get_encoder_port+0x82/0x190 [i915] [ 9.723736] PGD 0 [ 9.724286] Oops: 0000 [#1] PREEMPT SMP [ 9.725386] Modules linked in: intel_powerclamp snd_hda_intel(+) coretemp crc 32c_intel snd_hda_codec snd_hda_core serio_raw snd_pcm snd_timer i915(+) parport _pc parport pinctrl_sunrisepoint pinctrl_intel nfsd nfs_acl [ 9.730635] CPU: 0 PID: 497 Comm: systemd-udevd Not tainted 4.3.0-rc2-eywa-10 967-g72de2cfd-dirty #2 [ 9.732785] Hardware name: Intel Corporation Cannonlake Client platform/Skyla ke DT DDR4 RVP8, BIOS CNLSE2R1.R00.X021.B00.1508040310 08/04/2015 [ 9.735785] task: ffff88008a704700 ti: ffff88016a1ac000 task.ti: ffff88016a1a c000 [ 9.737584] RIP: 0010:[<ffffffffa014eb72>] [<ffffffffa014eb72>] ddi_get_enco der_port+0x82/0x190 [i915] [ 9.739934] RSP: 0000:ffff88016a1af710 EFLAGS: 00010296 [ 9.741184] RAX: 000000000000004e RBX: ffff88008a9edc98 RCX: 0000000000000001 [ 9.742934] RDX: 000000000000004e RSI: ffffffff81fc1e82 RDI: 00000000ffffffff [ 9.744634] RBP: ffff88016a1af730 R08: 0000000000000000 R09: 0000000000000578 [ 9.746333] R10: 0000000000001065 R11: 0000000000000578 R12: fffffffffffffff8 [ 9.748033] R13: ffff88016a1af7a8 R14: ffff88016a1af794 R15: 0000000000000000 [ 9.749733] FS: 00007eff2e1e07c0(0000) GS:ffff88016fc00000(0000) knlGS:00000 00000000000 [ 9.751683] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 9.753083] CR2: 0000000000000058 CR3: 000000016922b000 CR4: 00000000003406f0 [ 9.754782] Stack: [ 9.755332] ffff88008a9edc98 ffff88008a9ed800 ffffffffa01d07b0 00000000fffb9 09e [ 9.757232] ffff88016a1af7d8 ffffffffa0154ea7 0000000000000246 ffff88016a370 080 [ 9.759182] ffff88016a370080 ffff88008a9ed800 0000000000000246 ffff88008a9ed c98 [ 9.761132] Call Trace: [ 9.761782] [<ffffffffa0154ea7>] intel_prepare_ddi+0x67/0x860 [i915] [ 9.763332] [<ffffffff81a56996>] ? _raw_spin_unlock_irqrestore+0x26/0x40 [ 9.765031] [<ffffffffa00fad01>] ? gen9_read32+0x141/0x360 [i915] [ 9.766531] [<ffffffffa00b43e1>] skl_set_power_well+0x431/0xa80 [i915] [ 9.768181] [<ffffffffa00b4a63>] skl_power_well_enable+0x13/0x20 [i915] [ 9.769781] [<ffffffffa00b2188>] intel_power_well_enable+0x28/0x50 [i915] [ 9.771481] [<ffffffffa00b4d52>] intel_display_power_get+0x92/0xc0 [i915] [ 9.773180] [<ffffffffa00b4fcb>] intel_display_set_init_power+0x3b/0x40 [i91 5] [ 9.774980] [<ffffffffa00b5170>] intel_power_domains_init_hw+0x120/0x520 [i9 15] [ 9.776780] [<ffffffffa0194c61>] i915_driver_load+0xb21/0xf40 [i915] So let's protect this case. My first attempt was to remove the intel_prepare_ddi, but Daniel had pointed out this is really needed to restore those registers values. And Imre pointed out that this case was without the flag protection and this was actually where things were going bad. So I've just checked and this indeed solves my issue. The regressing intel_prepare_ddi call was added in commit 1d2b9526a790d55b7ae870934a74937081f62de2 Author: Damien Lespiau <damien.lespiau@intel.com> Date: Fri Mar 6 18:50:53 2015 +0000 drm/i915/skl: Restore the DDI translation tables when enabling PW1 Cc: Imre Deak <imre.deak@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> [Jani: regression reference] Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-09-28Input: edt-ft5x06 - do not hardcode interrupt trigger typeDmitry Torokhov1-3/+9
Instead of hardcoding IRQ trigger type to IRQF_TRIGGER_FALLING, let's respect settings specified in device tree. To be compatible with older DTSes, if trigger type is not set up in DTS we'll set it to default (falling edge). Tested-by: Franklin S Cooper Jr <fcooper@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-09-28Input: edt-ft5x06 - use generic properties APIDmitry Torokhov1-11/+15
Instead of only parsing device tree properties let's switch to using generic properties API so that the driver can also work on other platforms. Tested-by: Franklin S Cooper Jr <fcooper@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-01 18:31:36 +0300