| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
"All related to the PCA953x driver when handling chips with more than 8
ports, now that works again"
* tag 'gpio-v5.3-5' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: pca953x: use pca953x_read_regs instead of regmap_bulk_read
gpio: pca953x: correct type of reg_direction
|
|
Pull dmaengine fixes from Vinod Koul:
"Some late fixes for drivers:
- memory leak in ti crossbar dma driver
- cleanup of omap dma probe
- Fix for link list configuration in sprd dma driver
- Handling fixed for DMACHCLR if iommu is mapped in rcar dma"
* tag 'dmaengine-fix-5.3' of git://git.infradead.org/users/vkoul/slave-dma:
dmaengine: rcar-dmac: Fix DMACHCLR handling if iommu is mapped
dmaengine: sprd: Fix the DMA link-list configuration
dmaengine: ti: omap-dma: Add cleanup in omap_dma_probe()
dmaengine: ti: dma-crossbar: Fix a memory leak bug
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fix from James Bottomley:
"Just a single lpfc fix adjusting the number of available queues for
high CPU count systems"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: lpfc: Raise config max for lpfc_fcp_mq_threshold variable
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm fix from Dan Williams:
"Restore support for 1GB alignment namespaces, truncate the end of
misaligned namespaces"
* tag 'libnvdimm-fix-5.3-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
libnvdimm/pfn: Fix namespace creation on misaligned addresses
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"There are three more fixes for this week:
- The Windows-on-ARM laptops require a workaround to prevent crashing
at boot from ACPI
- The Renesas 'draak' board needs one bugfix for the backlight
regulator
- Also for Renesas, the 'hihope' board accidentally had its eMMC
turned off in the 5.3 merge window"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
soc: qcom: geni: Provide parameter error checking
arm64: dts: renesas: hihope-common: Fix eMMC status
arm64: dts: renesas: r8a77995: draak: Fix backlight regulator name
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU fixes from Joerg Roedel:
- Revert an Intel VT-d patch that caused problems for some users.
- Removal of a feature in the Intel VT-d driver that was never
supported in hardware. This qualifies as a fix because the code for
this feature sets reserved bits in the invalidation queue descriptor,
causing failed invalidations on real hardware.
- Two fixes for AMD IOMMU driver to fix a race condition and to add a
missing IOTLB flush when kernel is booted in kdump mode.
* tag 'iommu-fixes-v5.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/amd: Fix race in increase_address_space()
iommu/amd: Flush old domains in kdump kernel
iommu/vt-d: Remove global page flush support
Revert "iommu/vt-d: Avoid duplicated pci dma alias consideration"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fix from Ulf Hansson:
"Revert in order to fix card init for some eMMCs that need retries for
CMD6"
* tag 'mmc-v5.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
Revert "mmc: core: do not retry CMD6 in __mmc_switch()"
|
|
Pull drm fixes from Dave Airlie:
"Live from my friend's couch in Barcelona, latest round of drm fixes.
The command line parser regression fixes look a bit larger because
they come with selftests included for the bugs they fix. Otherwise a
single nouveau, single ingenic and single vmwgfx fix:
nouveau:
- add missing MODULE_FIRMWARE definitions
igenic:
- hardcode panel type DPI
vmwgfx:
- double free fix
core:
- command line mode parser fixes"
* tag 'drm-fixes-2019-09-06' of git://anongit.freedesktop.org/drm/drm:
drm/vmwgfx: Fix double free in vmw_recv_msg()
drm/nouveau/sec2/gp102: add missing MODULE_FIRMWAREs
drm/selftests: modes: Add more unit tests for the cmdline parser
drm/modes: Introduce a whitelist for the named modes
drm/modes: Fix the command line parser to take force options into account
drm/modes: Add a switch to differentiate free standing options
drm/ingenic: Hardcode panel type to DPI
|
|
When booting with ACPI, the Geni Serial Engine is not set as the I2C/SPI
parent and thus, the wrapper (parent device) is unassigned. This causes
the kernel to crash with a null dereference error.
Link: https://lore.kernel.org/r/20190905082555.15020-1-lee.jones@linaro.org
Fixes: 8bc529b25354 ("soc: qcom: geni: Add support for ACPI")
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
After the conversion to lock-less dma-api call the
increase_address_space() function can be called without any
locking. Multiple CPUs could potentially race for increasing
the address space, leading to invalid domain->mode settings
and invalid page-tables. This has been happening in the wild
under high IO load and memory pressure.
Fix the race by locking this operation. The function is
called infrequently so that this does not introduce
a performance regression in the dma-api path again.
Reported-by: Qian Cai <cai@lca.pw>
Fixes: 256e4621c21a ('iommu/amd: Make use of the generic IOVA allocator')
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
When devices are attached to the amd_iommu in a kdump kernel, the old device
table entries (DTEs), which were copied from the crashed kernel, will be
overwritten with a new domain number. When the new DTE is written, the IOMMU
is told to flush the DTE from its internal cache--but it is not told to flush
the translation cache entries for the old domain number.
Without this patch, AMD systems using the tg3 network driver fail when kdump
tries to save the vmcore to a network system, showing network timeouts and
(sometimes) IOMMU errors in the kernel log.
This patch will flush IOMMU translation cache entries for the old domain when
a DTE gets overwritten with a new domain number.
Signed-off-by: Stuart Hayes <stuart.w.hayes@gmail.com>
Fixes: 3ac3e5ee5ed5 ('iommu/amd: Copy old trans table from old kernel')
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
drm-misc-fixes for v5.3 final:
- Make ingenic panel type DPI insteado f unknown.
- Fixes for command line parser modes.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/606d87b2-1840-c893-eb30-d6c471c9e50a@linux.intel.com
|
|
git://people.freedesktop.org/~thomash/linux into drm-fixes
Single vmwgfx double free fix.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
We recently added a kfree() after the end of the loop:
if (retries == RETRIES) {
kfree(reply);
return -EINVAL;
}
There are two problems. First the test is wrong and because retries
equals RETRIES if we succeed on the last iteration through the loop.
Second if we fail on the last iteration through the loop then the kfree
is a double free.
When you're reading this code, please note the break statement at the
end of the while loop. This patch changes the loop so that if it's not
successful then "reply" is NULL and we can test for that afterward.
Cc: <stable@vger.kernel.org>
Fixes: 6b7c3b86f0b6 ("drm/vmwgfx: fix memory leak when too many retries have occurred")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
|
|
This reverts commit 7f466032dc ("vhost: access vq metadata through
kernel virtual address"). The commit caused a bunch of issues, and
while commit 73f628ec9e ("vhost: disable metadata prefetch
optimization") disabled the optimization it's not nice to keep lots of
dead code around.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
It is unnecessary to use ret variable to return the error
code, just return the error code directly.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
This change lowers ring buffer reclaim threshold from 1/2*queue to budget
for better performance. According to our test with qemu + dpdk, packet
dropping happens when the guest is not able to provide free buffer in
avail ring timely with default 1/2*queue. The value in the patch has been
tested and does show better performance.
Test setup: iperf3 to generate packets to guest (total 30mins, pps 400k, UDP)
avg packets drop before: 2842
avg packets drop after: 360(-87.3%)
Further, current code suffers from a starvation problem: the amount of
work done by try_fill_recv is not bounded by the budget parameter, thus
(with large queues) once in a while userspace gets blocked for a long
time while queue is being refilled. Trigger refills earlier to make sure
the amount of work to do is limited.
Signed-off-by: jiangkidd <jiangkidd@hotmail.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Since vhost_exceeds_weight() was introduced, callers need to specify
the packet weight and byte weight in vhost_dev_init(). Note that, the
packet weight isn't counted in this patch to keep the original behavior
unchanged.
Fixes: e82b9b0727ff ("vhost: introduce vhost_exceeds_weight()")
Cc: stable@vger.kernel.org
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
Since below commit, callers need to specify the iov_limit in
vhost_dev_init() explicitly.
Fixes: b46a0bf78ad7 ("vhost: fix OOB in get_rx_bufs()")
Cc: stable@vger.kernel.org
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
The commit 20c169aceb45 ("dmaengine: rcar-dmac: clear pertinence
number of channels") forgets to clear the last channel by
DMACHCLR in rcar_dmac_init() (and doesn't need to clear the first
channel) if iommu is mapped to the device. So, this patch fixes it
by using "channels_mask" bitfield.
Note that the hardware and driver don't support more than 32 bits
in DMACHCLR register anyway, so this patch should reject more than
32 channels in rcar_dmac_parse_of().
Fixes: 20c169aceb459575 ("dmaengine: rcar-dmac: clear pertinence number of channels")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/1567424643-26629-1-git-send-email-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
For the Spreadtrum DMA link-list mode, when the DMA engine got a slave
hardware request, which will trigger the DMA engine to load the DMA
configuration from the link-list memory automatically. But before the
slave hardware request, the slave will get an incorrect residue due
to the first node used to trigger the link-list was configured as the
last source address and destination address.
Thus we should make sure the first node was configured the start source
address and destination address, which can fix this issue.
Fixes: 4ac695464763 ("dmaengine: sprd: Support DMA link-list mode")
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Link: https://lore.kernel.org/r/77868edb7aff9d5cb12ac3af8827ef2e244441a6.1567150471.git.baolin.wang@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Turns out the commit 3a0681c7448b ("mmc: core: do not retry CMD6 in
__mmc_switch()") breaks initialization of a Toshiba THGBMNG5 eMMC card,
when using the meson-gx-mmc.c driver on a custom board based on Amlogic
A113D.
The CMD6 that switches the card into HS200 mode is then one that fails and
according to the below printed messages from the log:
[ 1.648951] mmc0: mmc_select_hs200 failed, error -84
[ 1.648988] mmc0: error -84 whilst initialising MMC card
After some analyze, it turns out that adding a delay of ~5ms inside
mmc_select_bus_width() but after mmc_compare_ext_csds() has been executed,
also fixes the problem. Adding yet some more debug code, trying to figure
out if potentially the card could be in a busy state, both by using CMD13
and ->card_busy() ops concluded that this was not the case.
Therefore, let's simply revert the commit that dropped support for retrying
of CMD6, as this also fixes the problem.
Fixes: 3a0681c7448b ("mmc: core: do not retry CMD6 in __mmc_switch()")
Cc: stable@vger.kernel.org
Signed-off-by: Jan Kaisrlik <ja.kaisrlik@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Global pages support is removed from VT-d spec 3.0. Since global pages G
flag only affects first-level paging structures and because DMA request
with PASID are only supported by VT-d spec. 3.0 and onward, we can
safely remove global pages support.
For kernel shared virtual address IOTLB invalidation, PASID
granularity and page selective within PASID will be used. There is
no global granularity supported. Without this fix, IOTLB invalidation
will cause invalid descriptor error in the queued invalidation (QI)
interface.
Fixes: 1c4f88b7f1f9 ("iommu/vt-d: Shared virtual address in scalable mode")
Reported-by: Sanjay K Kumar <sanjay.k.kumar@intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Single nouveau firmware fix.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Ben Skeggs <skeggsb@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CACAvsv5uGLgDY8V8pWgEH0-YhkCEgvHE=NZ1W_m0gJaoFPuQ0g@mail.gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small char and misc driver fixes for reported issues for
5.3-rc7
Also included in here is the documentation for how we are handling
hardware issues under embargo that everyone has finally agreed on, as
well as a MAINTAINERS update for the suckers who agreed to handle the
LICENSES/ files.
All of these have been in linux-next last week with no reported
issues"
* tag 'char-misc-5.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
fsi: scom: Don't abort operations for minor errors
vmw_balloon: Fix offline page marking with compaction
VMCI: Release resource if the work is already queued
Documentation/process: Embargoed hardware security issues
lkdtm/bugs: fix build error in lkdtm_EXHAUST_STACK
mei: me: add Tiger Lake point LP device ID
intel_th: pci: Add Tiger Lake support
intel_th: pci: Add support for another Lewisburg PCH
stm class: Fix a double free of stm_source_device
MAINTAINERS: add entry for LICENSES and SPDX stuff
fpga: altera-ps-spi: Fix getting of optional confd gpio
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB fixes that have been in linux-next this past
week for 5.3-rc7
They fix the usual xhci, syzbot reports, and other small issues that
have come up last week.
All have been in linux-next with no reported issues"
* tag 'usb-5.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: cdc-wdm: fix race between write and disconnect due to flag abuse
usb: host: xhci: rcar: Fix typo in compatible string matching
usb: host: xhci-tegra: Set DMA mask correctly
USB: storage: ums-realtek: Whitelist auto-delink support
USB: storage: ums-realtek: Update module parameter description for auto_delink_en
usb: host: ohci: fix a race condition between shutdown and irq
usb: hcd: use managed device resources
typec: tcpm: fix a typo in the comparison of pdo_max_voltage
usb-storage: Add new JMS567 revision to unusual_devs
usb: chipidea: udc: don't do hardware access if gadget has stopped
usbtmc: more sanity checking for packet size
usb: udc: lpc32xx: silence fall-through warning
|
|
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org [v5.2+]
|
|
Pull networking fixes from David Miller:
1) Fix some length checks during OGM processing in batman-adv, from
Sven Eckelmann.
2) Fix regression that caused netfilter conntrack sysctls to not be
per-netns any more. From Florian Westphal.
3) Use after free in netpoll, from Feng Sun.
4) Guard destruction of pfifo_fast per-cpu qdisc stats with
qdisc_is_percpu_stats(), from Davide Caratti. Similar bug is fixed
in pfifo_fast_enqueue().
5) Fix memory leak in mld_del_delrec(), from Eric Dumazet.
6) Handle neigh events on internal ports correctly in nfp, from John
Hurley.
7) Clear SKB timestamp in NF flow table code so that it does not
confuse fq scheduler. From Florian Westphal.
8) taprio destroy can crash if it is invoked in a failure path of
taprio_init(), because the list head isn't setup properly yet and
the list del is unconditional. Perform the list add earlier to
address this. From Vladimir Oltean.
9) Make sure to reapply vlan filters on device up, in aquantia driver.
From Dmitry Bogdanov.
10) sgiseeq driver releases DMA memory using free_page() instead of
dma_free_attrs(). From Christophe JAILLET.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (58 commits)
net: seeq: Fix the function used to release some memory in an error handling path
enetc: Add missing call to 'pci_free_irq_vectors()' in probe and remove functions
net: bcmgenet: use ethtool_op_get_ts_info()
tc-testing: don't hardcode 'ip' in nsPlugin.py
net: dsa: microchip: add KSZ8563 compatibility string
dt-bindings: net: dsa: document additional Microchip KSZ8563 switch
net: aquantia: fix out of memory condition on rx side
net: aquantia: linkstate irq should be oneshot
net: aquantia: reapply vlan filters on up
net: aquantia: fix limit of vlan filters
net: aquantia: fix removal of vlan 0
net/sched: cbs: Set default link speed to 10 Mbps in cbs_set_port_rate
taprio: Set default link speed to 10 Mbps in taprio_set_picos_per_byte
taprio: Fix kernel panic in taprio_destroy
net: dsa: microchip: fill regmap_config name
rxrpc: Fix lack of conn cleanup when local endpoint is cleaned up [ver #2]
net: stmmac: dwmac-rk: Don't fail if phy regulator is absent
amd-xgbe: Fix error path in xgbe_mod_init()
netfilter: nft_meta_bridge: Fix get NFT_META_BRI_IIFVPROTO in network byteorder
mac80211: Correctly set noencrypt for PAE frames
...
|
|
path
In commit 99cd149efe82 ("sgiseeq: replace use of dma_cache_wback_inv"),
a call to 'get_zeroed_page()' has been turned into a call to
'dma_alloc_coherent()'. Only the remove function has been updated to turn
the corresponding 'free_page()' into 'dma_free_attrs()'.
The error hndling path of the probe function has not been updated.
Fix it now.
Rename the corresponding label to something more in line.
Fixes: 99cd149efe82 ("sgiseeq: replace use of dma_cache_wback_inv")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
functions
Call to 'pci_free_irq_vectors()' are missing both in the error handling
path of the probe function, and in the remove function.
Add them.
Fixes: 19971f5ea0ab ("enetc: add PTP clock driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This change enables the use of SW timestamping on the Raspberry Pi 4.
bcmgenet's transmit function bcmgenet_xmit() implements software
timestamping. However the SOF_TIMESTAMPING_TX_SOFTWARE capability was
missing and only SOF_TIMESTAMPING_RX_SOFTWARE was announced. By using
ethtool_ops bcmgenet_ethtool_ops() as get_ts_info(), the
SOF_TIMESTAMPING_TX_SOFTWARE capability is announced.
Similar to commit a8f5cb9e7991 ("smsc95xx: use ethtool_op_get_ts_info()")
Signed-off-by: Ryan M. Collins <rmc032@bucknell.edu>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Doug Berger <opendmb@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It is a 3-Port 10/100 Ethernet Switch with 1588v2 PTP.
Signed-off-by: Razvan Stefanescu <razvan.stefanescu@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
On embedded environments with hard memory limits it is a normal although
rare case when skb can't be allocated on rx part under high traffic.
In such OOM cases napi_complete_done() was not called.
So the napi object became in an invalid state like it is "scheduled".
Kernel do not re-schedules the poll of that napi object.
Consequently, kernel can not remove that object the system hangs on
`ifconfig down` waiting for a poll.
We are fixing this by gracefully closing napi poll routine with correct
invocation of napi_complete_done.
This was reproduced with artificially failing the allocation of skb to
simulate an "out of memory" error case and check that traffic does
not get stuck.
Fixes: 970a2e9864b0 ("net: ethernet: aquantia: Vector operations")
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Declaring threaded irq handler should also indicate the irq is
oneshot. It is oneshot indeed, because HW implements irq automasking
on trigger.
Not declaring this causes some kernel configurations to fail
on interface up, because request_threaded_irq returned an err code.
The issue was originally hidden on normal x86_64 configuration with
latest kernel, because depending on interrupt controller, irq driver
added ONESHOT flag on its own.
Issue was observed on older kernels (4.14) where no such logic exists.
Fixes: 4c83f170b3ac ("net: aquantia: link status irq handling")
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Reported-by: Michael Symolkin <Michael.Symolkin@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In case of device reconfiguration the driver may reset the device invisible
for other modules, vlan module in particular. So vlans will not be
removed&created and vlan filters will not be configured in the device.
The patch reapplies the vlan filters at device start.
Fixes: 7975d2aff5afb ("net: aquantia: add support of rx-vlan-filter offload")
Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix a limit condition of vlans on the interface before setting vlan
promiscuous mode
Fixes: 48dd73d08d4dd ("net: aquantia: fix vlans not working over bridged network")
Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Due to absence of checking against the rx flow rule when vlan 0 is being
removed, the other rule could be removed instead of the rule with vlan 0
Fixes: 7975d2aff5afb ("net: aquantia: add support of rx-vlan-filter offload")
Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use the register value width as the regmap_config name to prevent the
following error when the second and third regmap_configs are
initialized.
"debugfs: Directory '${bus-id}' with parent 'regmap' already present!"
Signed-off-by: George McCollister <george.mccollister@gmail.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"I2C has a bunch of driver fixes and a core improvement to make the
on-going API transition more robust"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: mediatek: disable zero-length transfers for mt8183
i2c: iproc: Stop advertising support of SMBUS quick cmd
MAINTAINERS: i2c mv64xxx: Update documentation path
i2c: piix4: Fix port selection for AMD Family 16h Model 30h
i2c: designware: Synchronize IRQs when unregistering slave client
i2c: i801: Avoid memory leak in check_acpi_smo88xx_device()
i2c: make i2c_unregister_device() ERR_PTR safe
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fix from Herbert Xu:
"Fix a potential crash in the ccp driver"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: ccp - Ignore unconfigured CCP device on suspend/resume
|
|
Daniel Borkmann says:
====================
pull-request: bpf 2019-08-31
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Fix 32-bit zero-extension during constant blinding which
has been causing a regression on ppc64, from Naveen.
2) Fix a latency bug in nfp driver when updating stack index
register, from Jiong.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The devicetree binding lists the phy phy as optional. As such, the
driver should not bail out if it can't find a regulator. Instead it
should just skip the remaining regulator related code and continue
on normally.
Skip the remainder of phy_power_on() if a regulator supply isn't
available. This also gets rid of the bogus return code.
Fixes: 2e12f536635f ("net: stmmac: dwmac-rk: Use standard devicetree property for phy regulator")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In xgbe_mod_init(), we should do cleanup if some error occurs
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: efbaa828330a ("amd-xgbe: Add support to handle device renaming")
Fixes: 47f164deab22 ("amd-xgbe: Add PCI device support")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"The majority of the fixes this time are for OMAP hardware, here is a
breakdown of the significant changes:
Various device tree bug fixes:
- TI am57xx boards need a voltage level fix to avoid damaging SD
cards
- vf610-bk4 fails to detect its flash due to an incorrect description
- meson-g12a USB phy configuration fails
- meson-g12b reboot should not power off the SD card
- Some corrections for apparently harmless differences from the
documentation.
Regression fixes:
- ams-delta FIQ interrupts broke in 5.3
- TI am3/am4 mmc controllers broke in 5.2
The logic_pio driver (used on some Huawei ARM servers) got a few bug
fixes for reliability.
And a couple of compile-time warning fixes"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (26 commits)
soc: ixp4xx: Protect IXP4xx SoC drivers by ARCH_IXP4XX || COMPILE_TEST
soc: ti: pm33xx: Make two symbols static
soc: ti: pm33xx: Fix static checker warnings
ARM: OMAP: dma: Mark expected switch fall-throughs
ARM: dts: Fix incomplete dts data for am3 and am4 mmc
bus: ti-sysc: Simplify cleanup upon failures in sysc_probe()
ARM: OMAP1: ams-delta-fiq: Fix missing irq_ack
ARM: dts: dra74x: Fix iodelay configuration for mmc3
ARM: dts: am335x: Fix UARTs length
ARM: OMAP2+: Fix omap4 errata warning on other SoCs
bus: hisi_lpc: Add .remove method to avoid driver unbind crash
bus: hisi_lpc: Unregister logical PIO range to avoid potential use-after-free
lib: logic_pio: Add logic_pio_unregister_range()
lib: logic_pio: Avoid possible overlap for unregistering regions
lib: logic_pio: Fix RCU usage
arm64: dts: amlogic: odroid-n2: keep SD card regulator always on
arm64: dts: meson-g12a-sei510: enable IR controller
arm64: dts: meson-g12a: add missing dwc2 phy-names
ARM: dts: vf610-bk4: Fix qspi node description
ARM: dts: Fix incorrect dcan register mapping for am3, am4 and dra7
...
|
|
Pull rdma fix from Doug Ledford:
"Much calmer week this week. Just one patch queued up:
The way the siw driver was locking around the traversal of the list of
ipv6 addresses on a device was causing a scheduling while atomic
issue. Bernard straightened it out by using the rtnl_lock"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/siw: Fix IPv6 addr_list locking
|
|
Pull two ceph fixes from Ilya Dryomov:
"A fix for a -rc1 regression in rbd and a trivial static checker fix"
* tag 'ceph-for-5.3-rc7' of git://github.com/ceph/ceph-client:
rbd: restore zeroing past the overlap when reading from parent
libceph: don't call crypto_free_sync_skcipher() on a NULL tfm
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"MMC core:
- Fix init of SD cards reporting an invalid VDD range
MMC host:
- sprd: Fixes for clocks, card-detect, write-protect etc
- cadence: Fix ADMA 64-bit addressing
- tegra: Re-allow writing to SD card when GPIO pin is absent
- at91: Fix eMMC init by clearing HS200 cap as it's not supported"
* tag 'mmc-v5.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci-cadence: enable v4_mode to fix ADMA 64-bit addressing
mmc: sdhci-sprd: clear the UHS-I modes read from registers
mms: sdhci-sprd: add SDHCI_QUIRK_BROKEN_CARD_DETECTION
mmc: sdhci-sprd: add SDHCI_QUIRK2_PRESET_VALUE_BROKEN
mmc: sdhci-sprd: add get_ro hook function
mmc: sdhci-sprd: fixed incorrect clock divider
mmc: core: Fix init of SD cards reporting an invalid VDD range
mmc: sdhci-of-at91: add quirk for broken HS200
Revert "mmc: sdhci-tegra: drop ->get_ro() implementation"
|
|
Pull drm fixes from Dave Airlie:
"Nothing too crazy, there's probably more patches than I'd like at this
stage, but they are all pretty self contained:
amdgpu:
- Fix GFXOFF regression for PCO and RV2
- Fix missing fence reference
- Fix VG20 power readings on certain SMU firmware versions
- Fix dpm level setup for VG20
- Add an ATPX laptop quirk
i915:
- Fix DP MST max BPC property creation after DRM register
- Fix unused ggtt deballooning and NULL dereference in guest
- Fix DSC eDP transcoder identification
- Fix WARN from DMA API debug by setting DMA max segment size
qxl:
- Make qxl reservel the vga ports using vgaargb to prevent switching to vga compatibility mode.
omap:
- Fix omap port lookup for SDI output
virtio:
- Use virtio_max_dma_size to fix an issue with swiotlb.
komeda:
- Compiler fixes to komeda.
- Add missing of_node_get() call in komeda.
- Reorder the komeda de-init functions"
* tag 'drm-fixes-2019-08-30' of git://anongit.freedesktop.org/drm/drm:
drm/komeda: Reordered the komeda's de-init functions
drm/amdgpu: fix GFXOFF on Picasso and Raven2
drm/amdgpu: Add APTX quirk for Dell Latitude 5495
drm/amd/powerplay: correct Vega20 dpm level related settings
drm/i915: Call dma_set_max_seg_size() in i915_driver_hw_probe()
drm/i915/dp: Fix DSC enable code to use cpu_transcoder instead of encoder->type
drm/i915: Don't deballoon unused ggtt drm_mm_node in linux guest
drm/i915: Do not create a new max_bpc prop for MST connectors
drm/powerplay: Fix Vega20 power reading again
drm/powerplay: Fix Vega20 Average Power value v4
drm/amdgpu: fix dma_fence_wait without reference
drm/komeda: Add missing of_node_get() call
drm/komeda: Clean warning 'komeda_component_add' might be a candidate for 'gnu_printf'
drm/komeda: Fix warning -Wunused-but-set-variable
drm/komeda: Fix error: not allocating enough data 1592 vs 1584
drm/virtio: use virtio_max_dma_size
drm/omap: Fix port lookup for SDI output
drm/qxl: get vga ioports
|
|
This reverts commit 557529494d79f3f1fadd486dd18d2de0b19be4da.
Commit 557529494d79f ("iommu/vt-d: Avoid duplicated pci dma alias
consideration") aimed to address a NULL pointer deference issue
happened when a thunderbolt device driver returned unexpectedly.
Unfortunately, this change breaks a previous pci quirk added by
commit cc346a4714a59 ("PCI: Add function 1 DMA alias quirk for
Marvell devices"), as the result, devices like Marvell 88SE9128
SATA controller doesn't work anymore.
We will continue to try to find the real culprit mentioned in
557529494d79f, but for now we should revert it to fix current
breakage.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=204627
Cc: Stijn Tintel <stijn@linux-ipv6.be>
Cc: Petr Vandrovec <petr@vandrovec.name>
Reported-by: Stijn Tintel <stijn@linux-ipv6.be>
Reported-by: Petr Vandrovec <petr@vandrovec.name>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Quoting from mt8183 datasheet, the number of transfers to be
transferred in one transaction should be set to bigger than 1,
so we should forbid zero-length transfer and update functionality.
Reported-by: Alexandru M Stan <amstan@chromium.org>
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Qii Wang <qii.wang@mediatek.com>
[wsa: shortened commit message a little]
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
|
