summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2009-06-10edac: fold __func__ into edac_debug_printkBorislav Petkov1-4/+5
This shortens debugfX() calls a bit. Reviewed-by: Mauro Carvalho Chehab <mchehab@redhat.com> CC: Doug Thompson <norsk5@yahoo.com> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-06-10HID: fix inverted wheel for bluetooth version of apple mighty mouseJiri Kosina1-4/+0
Bluetooth version of Apple Mighty mouse (0x05ac/0x030c) doesn't, according to multiple reports on linux-input@, need the same quirk as the USB version of this mouse (0x05ac/0x0304) does. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-10can: sja1000_of_platform: fix build problems with printk formatWolfgang Grandegger1-4/+6
According to "Documentation/printk-formats.txt", if the type is dependent on a config option for its size, like resource_size_t, we should use a format specifier of its largest possible type and explicitly cast to it. Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-10qlge: bugfix: Get rid of errant spin_unlock().Ron Mercer1-1/+0
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-10qlge: Add set TX csum ethtool op.Ron Mercer1-0/+1
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-10qlge: Add support for varied pcie function numbers.Ron Mercer2-6/+68
Currently we support only PCIe NIC functions zero and one, and FCoE functions as 3 and 4. Future configurations can mix these up in any fashion. This patch removes the 0-1 dependancy and allows usage of any of the 4 functions. We also find the alternate NIC function (if exist) and determine our port number based on the comparison of the two functions: Lower function number gets first port, higher function gets second port. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-10qlge: Add support for using alternate MAC address.Ron Mercer1-2/+15
Extract either manufacturer or Bladecenter Open Fabric Manager (BOFM) MAC address. BOFM may indicate an alternate MAC address. This patch honors that request by extracting the MAC address from a different flash location if a flag is set. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-10qlge: Drop inbound frames > MTU.Ron Mercer1-0/+9
The max frame size register is set higher than the MTU to accomodate FCoE frames. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-10qlge: Drop inbound error frames.Ron Mercer1-1/+7
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-10qlge: Remove netif_set_gso_max_size() call.Ron Mercer1-1/+0
Not necessary if hardware supports 65536 as it's the default setting. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-10qlge: Add support for retrieving firmware version.Ron Mercer4-1/+47
This is used by driver banner and ethtool info. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-10Make /dev/zero reads interruptible by signalsLinus Torvalds1-3/+2
This helps with bad latencies for large reads from /dev/zero, but might conceivably break some application that "knows" that a read of /dev/zero cannot return early. So do this early in the merge window to give us maximal test coverage, even if the patch is totally trivial. Obviously, no well-behaved application should ever depend on the read being uninterruptible, but hey, bugs happen. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-10char: mxser, fix ISA board lookupPeter Botha1-1/+1
There's a bug in the mxser kernel module that still appears in the 2.6.29.4 kernel. mxser_get_ISA_conf takes a ioaddress as its first argument, by passing the not of the ioaddr, you're effectively passing 0 which means it won't be able to talk to an ISA card. I have tested this, and removing the ! fixes the problem. Cc: "Peter Botha" <peterb@goldcircle.co.za> Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-10[SCSI] mpt fusion: fix up doc book commentsJames Bottomley2-13/+8
Several of the doc book in the previous patches had incorrect multi-line short function descriptors. Fixed it all to be the correct single line descriptor. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-10[SCSI] mpt fusion: Added support for Broadcast primitives Event handlingKashyap, Desai4-0/+230
Firmware is able to handle Broadcast primitives, but upstream driver does not have support for broadcast primitive handling. Now this patch is mainly to support broadcast primitives. Signed-off-by: Kashyap Desai <kadesai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-10[SCSI] mpt fusion: Queue full event handlingKashyap, Desai2-0/+139
FW will report Queue full event to Driver and driver will handle this queue full event to SCSI Mid layer. Signed-off-by: Kashyap Desai <kadesai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-10[SCSI] mpt fusion: RAID device handling and Dual port Raid support is addedKashyap, Desai5-62/+527
1. Handle integrated Raid device(Add/Delete) and error condition and check related to Raid device. is_logical_volume will represent logical volume device. 2. Raid device dual port support is added. Main functions to support this feature are mpt_raid_phys_disk_get_num_paths and mpt_raid_phys_disk_pg1. Signed-off-by: Kashyap Desai <kadesai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-10[SCSI] mpt fusion: Put IOC into ready state if it not already in ready stateKashyap, Desai1-0/+16
Signed-off-by: Kashyap Desai <kadesai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-10[SCSI] mpt fusion: Code Cleanup patchKashyap, Desai6-294/+443
Resending patch considering Grants G's code review. Main goal to submit this patch is code cleaup. 1. Better driver debug prints and code indentation. 2. fault_reset_work_lock is not used anywhere. driver is using taskmgmt_lock instead of fault_reset_work_lock. 3. setting pci_set_drvdata properly. 4. Ingore config request when IOC is in reset state.( ioc_reset_in_progress is set). 5. Init/clear managment frame proprely.(INITIALIZE_MGMT_STATUS and CLEAR_MGMT_STATUS) Signed-off-by: Kashyap Desai <kadesai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-10[SCSI] mpt fusion: Rescan SAS topology addedKashyap, Desai2-3/+172
1.) SAS topology Rescan is added. If Firmware is doing Reset and we get Device add interrupt from Firmware, we will not receive it as part of Reset is going ON. After Reset we will do special Rescan of SAS topology. 2.) Driver version changed from 3.04.08 to 3.04.09. Added proper lock/unlock in mptsas_not_responding_devices() as per James' comment. Signed-off-by: Kashyap Desai <kadesai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-10[SCSI] mpt fusion: SAS topology scan changes, expander eventsKashyap, Desai2-236/+515
SAS topology scan is restructured. HBA firmware is generating more events. Expander Events are added, Link status events are also added with respect to SAS topology scan optimization. Signed-off-by: Kashyap Desai <kadesai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-10[SCSI] mpt fusion: Firmware event implementation using seperate WorkQueueKashyap, Desai4-446/+984
Now Firmware events are handled by firmware event queue. Previously it was handled in interrupt context/WorkQueue of Linux. Firmware Event handling is restructured and optimized. Signed-off-by: Kashyap Desai <kadesai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-10[SCSI] mpt fusion: rewrite of ioctl_cmds internal generated functionKashyap, Desai6-320/+394
1) rewrite of ioctl_cmds internal generated function that issue commands to firmware, porting them to be single threaded using the generic MPT_MGMT struct. All wait Queues are replace by completion Queue. 2) added seperate callback handler for ioctl task managment (mptctl_taskmgmt_reply), to handle command that timeout 3) rewrite mptctl_bus_reset Signed-off-by: Kashyap Desai <kadesai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-10[SCSI] mpt fusion: Adding DeviceResetCtx for internal Device reset frameKashyap, Desai8-74/+105
1.) Added taskmgmt_quiesce_io flag in IOC and removed resetPending from _MPT_SCSI_HOST struct. 2.) Reset from Scsi mid layer and internal Reset are seperate context. Adding DeviceResetCtx for internal Device reset frame. mptsas_taskmgmt_complete is optimized as part of implementation. Signed-off-by: Kashyap Desai <kadesai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-10[SCSI] mpt fusion: rewrite taskmgmt request and completion routinesKashyap, Desai5-313/+239
1.) rewrite taskmanagement request and completion routines, making them single threaded and using the generic MPT_MGMT struct, deleting mptscsih_TMHandler, replacing with single request TM handler mptscsih_IssueTaskMgmt, and killing the watchdog timer functions. 2.) cleanup ioc_reset callback handlers, introducing wrappers for synchronizing error recovery (mpt_set_taskmgmt_in_progress_flag, mpt_clear_taskmgmt_in_progress_flag), as the fusion firmware only handles one task management request at a time Signed-off-by: Kashyap Desai <kadesai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-10[SCSI] mpt fusion: rewrite of all internal generated functionsKashyap, Desai7-330/+248
Rewrite of all internal generated functions that issue commands to firmware, porting them to be single threaded using the generic MPT_MGMT struct. Implemented using completion Queue. Signed-off-by: Kashyap Desai <kadesai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-10[SCSI] mpt fusion: config path optimized, completion queue is usedKashyap, Desai4-285/+255
1) Previously we had mutliple #defines to use same values. Now those #defines are optimized. MPT_IOCTL_STATUS_* is removed and MPT_MGMT_STATUS_* are new #defines. 2.) config path is optimized. Instead of wait Queue and timer, using completion Q. 3.) mpt_timer_expired is not used. [jejb: elide patch to eliminate mpt_timer_expired] Signed-off-by: Kashyap Desai <kadesai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-10[SCSI] mpt fusion: Optimized SendEvent notification Using Doorbell instead FIFOKashyap, Desai1-34/+42
SendEventNotification was handled through FIFO, now it is using doorbell to communicate with hardware. Added Sleep Flag as an extra argument to support Can-Sleep feature. Resending patch including compilation error fix reviewed by Grant Grundler. Signed-off-by: Kashyap Desai <kadesai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-10[SCSI] mpt fusion: Added support for MPT discovery completion checkKashyap, Desai3-2/+80
sas_discovery_quiesce_io flag is used to control IO start/resume functionality. IO will be stoped while doing discovery of topology. Once discovery is completed It will resume IO. Resending patch including James review. Signed-off-by: Kashyap Desai <kadesai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-10[SCSI] mpt fusion: Fixing 1078 data corruption issue for 36GB memory regionKashyap, Desai8-188/+318
The reason for this change is there is a data corruption when four different physical memory regions in the 36GB to 37GB region are accessed. This is only affecting 1078. The solution is we need to use different addressing when filling in the scatter gather table for the effected memory regions. So instead of snooping on all four different memory holes, we treat any physical addresses in the 36GB address with the same algorithm. The fix is explained below 1) Ensure that the message frames are NOT located in the trouble region. There is no remapping available for message frames, they must be allocated outside the problem region. 2) Ensure that Sense buffers are NOT in the trouble region. There is no remapping available. 3) Walk through the SGE entries and if any are inside the trouble region then they need to be remapped as discussed below. 1) Set the Local Address bit in the SGE Flags field. MPI_SGE_FLAGS_LOCAL_ADDRESS 2) Ensure we are using 64-bit SGEs 3) Set MSb (Bit 63) of the 64-bit address, this will indicate buffer location is Host Memory. Signed-off-by: Kashyap Desai <kadesai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-10drm/i915: Hook connector to encoder during load detection (fixes tv/vga detect)Keith Packard1-0/+2
With the DRM-driven DPMS code, encoders are considered idle unless a connector is hooked to them, so mode setting is skipped. This makes load detection fail as none of the hardware is enabled. Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-06-10drm/i915: NOMEM->NOSPCChris Wilson1-5/+5
To differentiate between encountering an out-of-memory error with running out of space in the aperture, use ENOSPC for the later. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-06-10drm/i915: use I915_GEM_GPU_DOMAINSChris Wilson1-13/+9
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-06-10drm/i915: no need to hold mutex for object lookupChris Wilson1-2/+1
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-06-10drm/i915: Call drm_vblank_post_modeset() on error paths.Chris Wilson1-4/+2
Ensure that the drm_vblank_pre_modeset() is always balanced by drm_vblank_post_modeset() within intel_crtc_mode_set(). Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-06-10drm/i915: OR in the COMMAND read domain for the batch buffer.Chris Wilson1-2/+6
The batch buffer may be shared with another read buffer, so we should not ignore any previously set domains, but just or in the command domain (and check that the buffer is not writable). Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-06-10drm/i915: Sanity check execbuffer arguments before touching state.Chris Wilson1-11/+27
By sending a broken execbuffer (its length was not suitably aligned) I triggered an operation upon a freed object. The invalid alignment was discovered after updating the write_domain on the object but before the object was placed on the active queue. So during the unwind process following the error, the now freed object attempts to flush its non-existent, but outstanding, GPU writes causing this use-after-free. [drm:i915_dispatch_gem_execbuffer] *ERROR* alignment [drm:i915_gem_execbuffer] *ERROR* dispatch failed -22 WARNING: at lib/kref.c:43 warn_slowpath_null+0x10/0x15() Modules linked in: Pid: 4552, comm: lt-csi-drm Not tainted 2.6.30-rc6 #423 Call Trace: [<c0119ef3>] warn_slowpath_fmt+0x57/0x6d [<c014de24>] ? get_pageblock_migratetype+0x18/0x1e [<c014e8fd>] ? free_hot_page+0xa/0xc [<c014e915>] ? __free_pages+0x16/0x1f [<c0153ebf>] ? shmem_truncate_range+0x63e/0x656 [<c015fb2f>] ? slob_page_alloc+0x146/0x1c8 [<c0119f19>] warn_slowpath_null+0x10/0x15 [<c01f55f2>] kref_get+0x1b/0x21 [<c02605db>] i915_gem_object_move_to_active+0x1f/0x56 [<c0261302>] i915_add_request+0x156/0x19a [<c026136e>] i915_gem_object_flush_gpu_write_domain+0x28/0x3f [<c0261eca>] i915_gem_object_unbind+0x4a/0x124 [<c0261fd7>] i915_gem_free_object+0x33/0x9b [<c0250d6b>] drm_gem_object_free+0x28/0x4a [<c0250d43>] ? drm_gem_object_free+0x0/0x4a [<c01f55ce>] kref_put+0x38/0x41 [<c0250cbf>] drm_gem_object_unreference+0x11/0x13 [<c0250d06>] drm_gem_object_handle_unreference+0x1e/0x21 [<c0250d13>] drm_gem_object_release_handle+0xa/0xe [<c01f3e6b>] idr_for_each+0x5f/0x98 [<c0250d09>] ? drm_gem_object_release_handle+0x0/0xe [<c0250daf>] drm_gem_release+0x22/0x34 [<c025046f>] drm_release+0x1e8/0x3c4 [<c0162d25>] __fput+0xaf/0x146 [<c0162dce>] fput+0x12/0x14 [<c01605ef>] filp_close+0x48/0x52 [<c011b182>] put_files_struct+0x57/0x9b [<c011b1e4>] exit_files+0x1e/0x20 [<c011c6b6>] do_exit+0x16d/0x511 [<c03704ab>] ? __schedule+0x3d4/0x3e5 [<c0103f0d>] ? handle_irq+0xd/0x69 [<c011caa7>] do_group_exit+0x4d/0x73 [<c011cae0>] sys_exit_group+0x13/0x17 [<c010268c>] sysenter_do_call+0x12/0x2b Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-06-09drm/i915: Skip lvds with Aopen i945GTt-VFAMichael Cousin1-0/+7
Signed-off-by: Michael Cousin <mika.cousin@gmail.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-06-09drm/i915: handle interrupt on new chipsetZhenyu Wang4-8/+190
Update interrupt handling methods for IGDNG with new registers for display and graphics interrupt functions. As we won't use irq-based vblank sync in dri2, so display interrupt on new chip will be used for hotplug only in future. Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-06-09drm/i915: enable MCHBAR if neededJesse Barnes2-0/+147
Using the new PNP resource checking code, this patch allows the i915 driver to allocate MCHBAR space if needed and use the BAR to determine current memory settings. [apw@canonical.com: moved to the new generic PNP resource interface] Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Andy Whitcroft <apw@canonical.com> Signed-off-by: Eric Anholt <eric@anholt.net> failure to update-index after git-am --reject to hand-apply Signed-off-by: Eric Anholt <eric@anholt.net>
2009-06-09tracing/events: convert block trace points to TRACE_EVENT()Li Zefan1-3/+2
TRACE_EVENT is a more generic way to define tracepoints. Doing so adds these new capabilities to this tracepoint: - zero-copy and per-cpu splice() tracing - binary tracing without printf overhead - structured logging records exposed under /debug/tracing/events - trace events embedded in function tracer output and other plugins - user-defined, per tracepoint filter expressions ... Cons: - no dev_t info for the output of plug, unplug_timer and unplug_io events. no dev_t info for getrq and sleeprq events if bio == NULL. no dev_t info for rq_abort,...,rq_requeue events if rq->rq_disk == NULL. This is mainly because we can't get the deivce from a request queue. But this may change in the future. - A packet command is converted to a string in TP_assign, not TP_print. While blktrace do the convertion just before output. Since pc requests should be rather rare, this is not a big issue. - In blktrace, an event can have 2 different print formats, but a TRACE_EVENT has a unique format, which means we have some unused data in a trace entry. The overhead is minimized by using __dynamic_array() instead of __array(). I've benchmarked the ioctl blktrace vs the splice based TRACE_EVENT tracing: dd dd + ioctl blktrace dd + TRACE_EVENT (splice) 1 7.36s, 42.7 MB/s 7.50s, 42.0 MB/s 7.41s, 42.5 MB/s 2 7.43s, 42.3 MB/s 7.48s, 42.1 MB/s 7.43s, 42.4 MB/s 3 7.38s, 42.6 MB/s 7.45s, 42.2 MB/s 7.41s, 42.5 MB/s So the overhead of tracing is very small, and no regression when using those trace events vs blktrace. And the binary output of TRACE_EVENT is much smaller than blktrace: # ls -l -h -rw-r--r-- 1 root root 8.8M 06-09 13:24 sda.blktrace.0 -rw-r--r-- 1 root root 195K 06-09 13:24 sda.blktrace.1 -rw-r--r-- 1 root root 2.7M 06-09 13:25 trace_splice.out Following are some comparisons between TRACE_EVENT and blktrace: plug: kjournald-480 [000] 303.084981: block_plug: [kjournald] kjournald-480 [000] 303.084981: 8,0 P N [kjournald] unplug_io: kblockd/0-118 [000] 300.052973: block_unplug_io: [kblockd/0] 1 kblockd/0-118 [000] 300.052974: 8,0 U N [kblockd/0] 1 remap: kjournald-480 [000] 303.085042: block_remap: 8,0 W 102736992 + 8 <- (8,8) 33384 kjournald-480 [000] 303.085043: 8,0 A W 102736992 + 8 <- (8,8) 33384 bio_backmerge: kjournald-480 [000] 303.085086: block_bio_backmerge: 8,0 W 102737032 + 8 [kjournald] kjournald-480 [000] 303.085086: 8,0 M W 102737032 + 8 [kjournald] getrq: kjournald-480 [000] 303.084974: block_getrq: 8,0 W 102736984 + 8 [kjournald] kjournald-480 [000] 303.084975: 8,0 G W 102736984 + 8 [kjournald] bash-2066 [001] 1072.953770: 8,0 G N [bash] bash-2066 [001] 1072.953773: block_getrq: 0,0 N 0 + 0 [bash] rq_complete: konsole-2065 [001] 300.053184: block_rq_complete: 8,0 W () 103669040 + 16 [0] konsole-2065 [001] 300.053191: 8,0 C W 103669040 + 16 [0] ksoftirqd/1-7 [001] 1072.953811: 8,0 C N (5a 00 08 00 00 00 00 00 24 00) [0] ksoftirqd/1-7 [001] 1072.953813: block_rq_complete: 0,0 N (5a 00 08 00 00 00 00 00 24 00) 0 + 0 [0] rq_insert: kjournald-480 [000] 303.084985: block_rq_insert: 8,0 W 0 () 102736984 + 8 [kjournald] kjournald-480 [000] 303.084986: 8,0 I W 102736984 + 8 [kjournald] Changelog from v2 -> v3: - use the newly introduced __dynamic_array(). Changelog from v1 -> v2: - use __string() instead of __array() to minimize the memory required to store hex dump of rq->cmd(). - support large pc requests. - add missing blk_fill_rwbs_rq() in block_rq_requeue TRACE_EVENT. - some cleanups. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> LKML-Reference: <4A2DF669.5070905@cn.fujitsu.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linusLinus Torvalds2-2/+2
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: kvm: fix kvm reboot crash when MAXSMP is used cpumask: alloc zeroed cpumask for static cpumask_var_ts cpumask: introduce zalloc_cpumask_var
2009-06-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds1-6/+5
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: cls_cgroup: Fix oops when user send improperly 'tc filter add' request r8169: fix crash when large packets are received
2009-06-09Merge branch 'for-linus' of git://neil.brown.name/mdLinus Torvalds1-14/+14
* 'for-linus' of git://neil.brown.name/md: md/raid5: fix bug in reshape code when chunk_size decreases. md/raid5 - avoid deadlocks in get_active_stripe during reshape md/raid5: use conf->raid_disks in preference to mddev->raid_disk
2009-06-09[SCSI] gdth: fix overlapping snprintf usersAlan Cox1-2/+3
Closes-bug: http://bugzilla.kernel.org/show_bug.cgi?id=13438 Closes-bug: http://bugzilla.kernel.org/show_bug.cgi?id=13437 Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-09[SCSI] bnx2i: Add bnx2i iSCSI driver.Michael Chan11-0/+7496
New iSCSI driver for Broadcom BNX2 devices. The driver interfaces with the CNIC driver to access the hardware. Signed-off-by: Anil Veerabhadrappa <anilgv@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-09[SCSI] cnic: Add new Broadcom CNIC driver.Michael Chan6-0/+3901
The CNIC driver controls BNX2 hardware rings and resources used by iSCSI. Most hardware resources for iSCSI are separate from those used for ethernet networking. iSCSI uses a separate MAC address and IP address. The CNIC driver creates a UIO interface to handle the non-offloaded packets such as ARP, etc in userspace. Signed-off-by: Michael Chan <mchan@broadcom.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-09[SCSI] bnx2: Add support for CNIC driver.Michael Chan2-3/+208
Add interface and functions to support a new CNIC driver to drive the Broadcom bnx2 hardware for iSCSI offload. Signed-off-by: Michael Chan <mchan@broadcom.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-09[SCSI] iscsi class: Add new NETLINK_ISCSI messages for cnic/bnx2i driver.Michael Chan1-36/+86
Add ISCSI_NETLINK messages for iSCSI NICs to get information such as path from userspace. Original iscsid messages are now always sent as multicast to group 1. The new messages are sent to group 2. The multicast changes were made by Mike Christie. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-09cpumask: alloc zeroed cpumask for static cpumask_var_tsYinghai Lu2-2/+2
These are defined as static cpumask_var_t so if MAXSMP is not used, they are cleared already. Avoid surprises when MAXSMP is enabled. Signed-off-by: Yinghai Lu <yinghai.lu@kernel.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-27 19:11:05 +0300