summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2023-04-24tpm, tpm_tis: Claim locality before writing interrupt registersLino Sanfilippo1-9/+11
In tpm_tis_probe_single_irq() interrupt registers TPM_INT_VECTOR, TPM_INT_STATUS and TPM_INT_ENABLE are modified to setup the interrupts. Currently these modifications are done without holding a locality thus they have no effect. Fix this by claiming the (default) locality before the registers are written. Since now tpm_tis_gen_interrupt() is called with the locality already claimed remove locality request and release from this function. Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com> Tested-by: Jarkko Sakkinen <jarkko@kernel.org> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2023-04-24tpm, tpm_tis: Do not skip reset of original interrupt vectorLino Sanfilippo1-18/+11
If in tpm_tis_probe_irq_single() an error occurs after the original interrupt vector has been read, restore the interrupts before the error is returned. Since the caller does not check the error value, return -1 in any case that the TPM_CHIP_FLAG_IRQ flag is not set. Since the return value of function tpm_tis_gen_interrupt() is not longer used, make it a void function. Fixes: 1107d065fdf1 ("tpm_tis: Introduce intermediate layer for TPM access") Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com> Tested-by: Jarkko Sakkinen <jarkko@kernel.org> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2023-04-24tpm, tpm_tis: Disable interrupts if tpm_tis_probe_irq() failedLino Sanfilippo1-11/+11
Both functions tpm_tis_probe_irq_single() and tpm_tis_probe_irq() may setup the interrupts and then return with an error. This case is indicated by a missing TPM_CHIP_FLAG_IRQ flag in chip->flags. Currently the interrupt setup is only undone if tpm_tis_probe_irq_single() fails. Undo the setup also if tpm_tis_probe_irq() fails. Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com> Tested-by: Michael Niewöhner <linux@mniewoehner.de> Tested-by: Jarkko Sakkinen <jarkko@kernel.org> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2023-04-24tpm, tpm_tis: Claim locality before writing TPM_INT_ENABLE registerLino Sanfilippo1-0/+4
In disable_interrupts() the TPM_GLOBAL_INT_ENABLE bit is unset in the TPM_INT_ENABLE register to shut the interrupts off. However modifying the register is only possible with a held locality. So claim the locality before disable_interrupts() is called. Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com> Tested-by: Michael Niewöhner <linux@mniewoehner.de> Tested-by: Jarkko Sakkinen <jarkko@kernel.org> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2023-04-24tpm, tpm_tis: Avoid cache incoherency in test for interruptsLino Sanfilippo3-12/+13
The interrupt handler that sets the boolean variable irq_tested may run on another CPU as the thread that checks irq_tested as part of the irq test in tpm_tis_send(). Since nothing guarantees cache coherency between CPUs for unsynchronized accesses to boolean variables the testing thread might not perceive the value change done in the interrupt handler. Avoid this issue by setting the bit TPM_TIS_IRQ_TESTED in the flags field of the tpm_tis_data struct and by accessing this field with the bit manipulating functions that provide cache coherency. Also convert all other existing sites to use the proper macros when accessing this bitfield. Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com> Tested-by: Michael Niewöhner <linux@mniewoehner.de> Tested-by: Jarkko Sakkinen <jarkko@kernel.org> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2023-04-24tpm: remove unnecessary (void*) conversionsYu Zhe1-3/+3
Pointer variables of void * type do not require type cast. Signed-off-by: Yu Zhe <yuzhe@nfschina.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2023-04-24tpm: cr50: i2c: use jiffies to wait for tpm ready irqMark Hasemeyer1-2/+1
When waiting for a tpm ready completion, the cr50 i2c driver incorrectly assumes that the value of timeout_a is represented in milliseconds instead of jiffies. Remove the msecs_to_jiffies conversion. Signed-off-by: Mark Hasemeyer <markhas@chromium.org> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2023-04-23Merge tag 'irq_urgent_for_v6.3' of ↵Linus Torvalds1-7/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fix from Borislav Petkov: - Remove an over-zealous sanity check of the array of MSI-X vectors to be allocated for a device * tag 'irq_urgent_for_v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: PCI/MSI: Remove over-zealous hardware size check in pci_msix_validate_entries()
2023-04-23Merge tag 'input-for-v6.3-rc7' of ↵Linus Torvalds2-0/+7
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: - a check in pegasus-notetaker driver to validate the type of pipe when probing a new device - a fix for Cypress touch controller to correctly parse maximum number of touches. * tag 'input-for-v6.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: cyttsp5 - fix sensing configuration data structure Input: pegasus-notetaker - check pipe type when probing
2023-04-21Revert "ACPICA: Events: Support fixed PCIe wake event"Linus Torvalds3-29/+0
This reverts commit 5c62d5aab8752e5ee7bfbe75ed6060db1c787f98. This broke wake-on-lan for multiple people, and for much too long. Link: https://bugzilla.kernel.org/show_bug.cgi?id=217069 Link: https://lore.kernel.org/all/754225a2-95a9-2c36-1886-7da1a78308c2@loongson.cn/ Link: https://github.com/acpica/acpica/pull/866 Cc: Rafael J. Wysocki <rafael@kernel.org> Cc: Jianmin Lv <lvjianmin@loongson.cn> Cc: Huacai Chen <chenhuacai@loongson.cn> Cc: Bob Moore <robert.moore@intel.com> Cc: stable@kernel.org # 6.2 Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-04-21Merge tag 'char-misc-6.3-final' of ↵Linus Torvalds7-18/+13
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "Here are some last-minute tiny driver fixes for 6.3-final. They include fixes for some fpga and iio drivers: - fpga bridge driver fix - fpga dfl error reporting fix - fpga m10bmc driver fix - fpga xilinx driver fix - iio light driver fix - iio dac fwhandle leak fix - iio adc driver fix All of these have been in linux-next for a few weeks with no reported problems" * tag 'char-misc-6.3-final' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: iio: light: tsl2772: fix reading proximity-diodes from device tree fpga: bridge: properly initialize bridge device before populating children iio: dac: ad5755: Add missing fwnode_handle_put() iio: adc: at91-sama5d2_adc: fix an error code in at91_adc_allocate_trigger() fpga: xilinx-pr-decoupler: Use readl wrapper instead of pure readl fpga: dfl-pci: Drop redundant pci_enable_pcie_error_reporting() fpga: m10bmc-sec: Fix rsu_send_data() to return FW_UPLOAD_ERR_HW_ERROR
2023-04-21Merge tag 'gpio-fixes-for-v6.3' of ↵Linus Torvalds2-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio fixes from Bartosz Golaszewski: - use raw_spinlocks in regmaps that are used in interrupt context in gpio-104-idi-48 and gpio-104-dio-48e * tag 'gpio-fixes-for-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: gpio: 104-idi-48: Enable use_raw_spinlock for idi48_regmap_config gpio: 104-dio-48e: Enable use_raw_spinlock for dio48e_regmap_config
2023-04-21Merge tag 'drm-fixes-2023-04-21' of git://anongit.freedesktop.org/drm/drmLinus Torvalds9-12/+61
Pull drm fixes from Dave Airlie: "This is the regular and hopefully last round of fixes for 6.3. Pretty small, a few amdgpu, one i915, one nouveau, one rockchip and one gpu scheduler fix: nouveau: - fix dma-resv timeout rockchip: - fix suspend/resume sched: - fix timeout handling i915: - Fix fast wake AUX sync len amdgpu: - GPU reset fix - DCN 3.1.5 line buffer fix - Display fix for single channel memory configs - Fix a possible divide by 0" * tag 'drm-fixes-2023-04-21' of git://anongit.freedesktop.org/drm/drm: drm/amd/display: fix a divided-by-zero error drm/amd/display: limit timing for single dimm memory drm/amd/display: set dcn315 lb bpp to 48 drm/amdgpu: Fix desktop freezed after gpu-reset drm/rockchip: vop2: Use regcache_sync() to fix suspend/resume drm/nouveau: fix incorrect conversion to dma_resv_wait_timeout() drm/rockchip: vop2: fix suspend/resume drm/i915: Fix fast wake AUX sync len drm/sched: Check scheduler ready before calling timeout handling
2023-04-21Merge tag 'amd-drm-fixes-6.3-2023-04-19' of ↵Dave Airlie5-4/+42
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-6.3-2023-04-19: amdgpu: - GPU reset fix - DCN 3.1.5 line buffer fix - Display fix for single channel memory configs - Fix a possible divide by 0 Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230420031717.7790-1-alexander.deucher@amd.com
2023-04-21Merge tag 'drm-intel-fixes-2023-04-19' of ↵Dave Airlie1-1/+1
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes drm/i915 fixes for v6.3 final: - Fix fast wake AUX sync len Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87354w1b76.fsf@intel.com
2023-04-21Merge tag 'drm-misc-fixes-2023-04-20-2' of ↵Dave Airlie3-7/+18
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes Short summary of fixes pull: * nouveau: fix dma-resv timeout * rockchip: fix suspend/resume * sched: fix timeout handling Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230420083114.GA17651@linux-uq9g
2023-04-21Merge tag 'pci-v6.3-fixes-3' of ↵Linus Torvalds3-12/+30
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci Pull pci fix from Bjorn Helgaas: - Previously we ignored PCI devices if the DT "status" property or the ACPI _STA method said it was not present. Per spec, _STA cannot be used for that purpose, and using it that way caused regressions, so skip the _STA check (Rob Herring) * tag 'pci-v6.3-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: PCI: Restrict device disabled status check to DT
2023-04-21wifi: ath9k: Don't mark channelmap stack variable read-only in ↵Toke Høiland-Jørgensen1-3/+1
ath9k_mci_update_wlan_channels() This partially reverts commit e161d4b60ae3a5356e07202e0bfedb5fad82c6aa. Turns out the channelmap variable is not actually read-only, it's modified through the MCI_GPM_CLR_CHANNEL_BIT() macro further down in the function, so making it read-only causes page faults when that code is hit. Link: https://bugzilla.kernel.org/show_bug.cgi?id=217183 Link: https://lore.kernel.org/r/20230413214118.153781-1-toke@toke.dk Fixes: e161d4b60ae3 ("wifi: ath9k: Make arrays prof_prio and channelmap static const") Cc: stable@vger.kernel.org Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-04-20PCI: Restrict device disabled status check to DTRob Herring3-12/+30
Commit 6fffbc7ae137 ("PCI: Honor firmware's device disabled status") checked the firmware device status for both DT and ACPI devices. That caused a regression in some ACPI systems. The exact reason isn't clear. It's possibly a firmware bug. For now, at least, refactor the check to be for DT based systems only. Note that the original implementation leaked a refcount which is now correctly handled. [bhelgaas: Per ACPI r6.5, sec 6.3.7, for devices on an enumerable bus, _STA must return with bit[0] ("device is present") set] Link: https://lore.kernel.org/all/m2fs9lgndw.fsf@gmail.com/ Fixes: 6fffbc7ae137 ("PCI: Honor firmware's device disabled status") Link: https://lore.kernel.org/r/20230419193513.708818-1-robh@kernel.org Link: https://bugzilla.kernel.org/show_bug.cgi?id=217317 Reported-by: Donald Hunter <donald.hunter@gmail.com> Reported-by: Vitaly Kuznetsov <vkuznets@redhat.com> Tested-by: Donald Hunter <donald.hunter@gmail.com> Tested-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Binbin Zhou <zhoubinbin@loongson.cn> Cc: Liu Peibao <liupeibao@loongson.cn> Cc: Huacai Chen <chenhuacai@loongson.cn>
2023-04-20Merge tag 'net-6.3-rc8' of ↵Linus Torvalds18-71/+75
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from netfilter and bpf. There are a few fixes for new code bugs, including the Mellanox one noted in the last networking pull. No known regressions outstanding. Current release - regressions: - sched: clear actions pointer in miss cookie init fail - mptcp: fix accept vs worker race - bpf: fix bpf_arch_text_poke() with new_addr == NULL on s390 - eth: bnxt_en: fix a possible NULL pointer dereference in unload path - eth: veth: take into account peer device for NETDEV_XDP_ACT_NDO_XMIT xdp_features flag Current release - new code bugs: - eth: revert "net/mlx5: Enable management PF initialization" Previous releases - regressions: - netfilter: fix recent physdev match breakage - bpf: fix incorrect verifier pruning due to missing register precision taints - eth: virtio_net: fix overflow inside xdp_linearize_page() - eth: cxgb4: fix use after free bugs caused by circular dependency problem - eth: mlxsw: pci: fix possible crash during initialization Previous releases - always broken: - sched: sch_qfq: prevent slab-out-of-bounds in qfq_activate_agg - netfilter: validate catch-all set elements - bridge: don't notify FDB entries with "master dynamic" - eth: bonding: fix memory leak when changing bond type to ethernet - eth: i40e: fix accessing vsi->active_filters without holding lock Misc: - Mat is back as MPTCP co-maintainer" * tag 'net-6.3-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (33 commits) net: bridge: switchdev: don't notify FDB entries with "master dynamic" Revert "net/mlx5: Enable management PF initialization" MAINTAINERS: Resume MPTCP co-maintainer role mailmap: add entries for Mat Martineau e1000e: Disable TSO on i219-LM card to increase speed bnxt_en: fix free-runnig PHC mode net: dsa: microchip: ksz8795: Correctly handle huge frame configuration bpf: Fix incorrect verifier pruning due to missing register precision taints hamradio: drop ISA_DMA_API dependency mlxsw: pci: Fix possible crash during initialization mptcp: fix accept vs worker race mptcp: stops worker on unaccepted sockets at listener close net: rpl: fix rpl header size calculation net: vmxnet3: Fix NULL pointer dereference in vmxnet3_rq_rx_complete() bonding: Fix memory leak when changing bond type to Ethernet veth: take into account peer device for NETDEV_XDP_ACT_NDO_XMIT xdp_features flag mlxfw: fix null-ptr-deref in mlxfw_mfa2_tlv_next() bnxt_en: Fix a possible NULL pointer dereference in unload path bnxt_en: Do not initialize PTP on older P3/P4 chips netfilter: nf_tables: tighten netlink attribute requirements for catch-all elements ...
2023-04-20Revert "net/mlx5: Enable management PF initialization"Jakub Kicinski3-15/+1
This reverts commit fe998a3c77b9f989a30a2a01fb00d3729a6d53a4. Paul reports that it causes a regression with IB on CX4 and FW 12.18.1000. In addition I think that the concept of "management PF" is not fully accepted and requires a discussion. Fixes: fe998a3c77b9 ("net/mlx5: Enable management PF initialization") Reported-by: Paul Moore <paul@paul-moore.com> Link: https://lore.kernel.org/all/CAHC9VhQ7A4+msL38WpbOMYjAqLp0EtOjeLh4Dc6SQtD6OUvCQg@mail.gmail.com/ Link: https://lore.kernel.org/r/20230413222547.56901-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-20Merge tag 'for-netdev' of ↵Jakub Kicinski1-6/+11
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf Daniel Borkmann says: ==================== bpf 2023-04-19 We've added 3 non-merge commits during the last 6 day(s) which contain a total of 3 files changed, 34 insertions(+), 9 deletions(-). The main changes are: 1) Fix a crash on s390's bpf_arch_text_poke() under a NULL new_addr, from Ilya Leoshkevich. 2) Fix a bug in BPF verifier's precision tracker, from Daniel Borkmann and Andrii Nakryiko. 3) Fix a regression in veth's xdp_features which led to a broken BPF CI selftest, from Lorenzo Bianconi. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: bpf: Fix incorrect verifier pruning due to missing register precision taints veth: take into account peer device for NETDEV_XDP_ACT_NDO_XMIT xdp_features flag s390/bpf: Fix bpf_arch_text_poke() with new_addr == NULL ==================== Link: https://lore.kernel.org/r/20230419195847.27060-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-20Merge branch '40GbE' of ↵Jakub Kicinski1-3/+6
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2023-04-17 (i40e) This series contains updates to i40e only. Alex moves setting of active filters to occur under lock and checks/takes error path in rebuild if re-initializing the misc interrupt vector failed. * '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: i40e: fix i40e_setup_misc_vector() error handling i40e: fix accessing vsi->active_filters without holding lock ==================== Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230417205245.1030733-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-20e1000e: Disable TSO on i219-LM card to increase speedSebastian Basierski1-25/+26
While using i219-LM card currently it was only possible to achieve about 60% of maximum speed due to regression introduced in Linux 5.8. This was caused by TSO not being disabled by default despite commit f29801030ac6 ("e1000e: Disable TSO for buffer overrun workaround"). Fix that by disabling TSO during driver probe. Fixes: f29801030ac6 ("e1000e: Disable TSO for buffer overrun workaround") Signed-off-by: Sebastian Basierski <sebastianx.basierski@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230417205345.1030801-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-20bnxt_en: fix free-runnig PHC modeVadim Fedorenko1-1/+1
The patch in fixes changed the way real-time mode is chosen for PHC on the NIC. Apparently there is one more use case of the check outside of ptp part of the driver which was not converted to the new macro and is making a lot of noise in free-running mode. Fixes: 131db4991622 ("bnxt_en: reset PHC frequency in free-running mode") Signed-off-by: Vadim Fedorenko <vadfed@meta.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Link: https://lore.kernel.org/r/20230418202511.1544735-1-vadfed@meta.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-19Merge tag 'spi-fix-v6.3-rc7' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fix from Mark Brown: "A small fix in the error handling for the rockchip driver, ensuring we don't leak clock enables if we fail to request the interrupt for the device" * tag 'spi-fix-v6.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: spi-rockchip: Fix missing unwind goto in rockchip_sfc_probe()
2023-04-19Merge tag 'regulator-fix-v6.3-rc7' of ↵Linus Torvalds2-6/+9
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fixes from Mark Brown: "A few driver specific fixes, one build coverage issue and a couple of 'someone typed in the wrong number' style errors in describing devices to the subsystem" * tag 'regulator-fix-v6.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: sm5703: Fix missing n_voltages for fixed regulators regulator: fan53555: Fix wrong TCS_SLEW_MASK regulator: fan53555: Explicitly include bits header
2023-04-19net: dsa: microchip: ksz8795: Correctly handle huge frame configurationChristophe JAILLET1-1/+1
Because of the logic in place, SW_HUGE_PACKET can never be set. (If the first condition is true, then the 2nd one is also true, but is not executed) Change the logic and update each bit individually. Fixes: 29d1e85f45e0 ("net: dsa: microchip: ksz8: add MTU configuration support") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/43107d9e8b5b8b05f0cbd4e1f47a2bb88c8747b2.1681755535.git.christophe.jaillet@wanadoo.fr Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-19spi: spi-rockchip: Fix missing unwind goto in rockchip_sfc_probe()Li Lanzhe1-1/+1
If devm_request_irq() fails, then we are directly return 'ret' without clk_disable_unprepare(sfc->clk) and clk_disable_unprepare(sfc->hclk). Fix this by changing direct return to a goto 'err_irq'. Fixes: 0b89fc0a367e ("spi: rockchip-sfc: add rockchip serial flash controller") Signed-off-by: Li Lanzhe <u202212060@hust.edu.cn> Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn> Link: https://lore.kernel.org/r/20230419115030.6029-1-u202212060@hust.edu.cn Signed-off-by: Mark Brown <broonie@kernel.org>
2023-04-19hamradio: drop ISA_DMA_API dependencyArnd Bergmann1-1/+1
It looks like the dependency got added accidentally in commit a553260618d8 ("[PATCH] ISA DMA Kconfig fixes - part 3"). Unlike the previously removed dmascc driver, the scc driver never used DMA. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-19mlxsw: pci: Fix possible crash during initializationIdo Schimmel1-1/+1
During initialization the driver issues a reset command via its command interface in order to remove previous configuration from the device. After issuing the reset, the driver waits for 200ms before polling on the "system_status" register using memory-mapped IO until the device reaches a ready state (0x5E). The wait is necessary because the reset command only triggers the reset, but the reset itself happens asynchronously. If the driver starts polling too soon, the read of the "system_status" register will never return and the system will crash [1]. The issue was discovered when the device was flashed with a development firmware version where the reset routine took longer to complete. The issue was fixed in the firmware, but it exposed the fact that the current wait time is borderline. Fix by increasing the wait time from 200ms to 400ms. With this patch and the buggy firmware version, the issue did not reproduce in 10 reboots whereas without the patch the issue is reproduced quite consistently. [1] mce: CPUs not responding to MCE broadcast (may include false positives): 0,4 mce: CPUs not responding to MCE broadcast (may include false positives): 0,4 Kernel panic - not syncing: Timeout: Not all CPUs entered broadcast exception handler Shutting down cpus with NMI Kernel Offset: 0x12000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) Fixes: ac004e84164e ("mlxsw: pci: Wait longer before accessing the device after reset") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-19net: vmxnet3: Fix NULL pointer dereference in vmxnet3_rq_rx_complete()Seiji Nishikawa1-1/+1
When vmxnet3_rq_create() fails to allocate rq->data_ring.base due to page allocation failure, subsequent call to vmxnet3_rq_rx_complete() can result in NULL pointer dereference. To fix this bug, check not only that rxDataRingUsed is true but also that adapter->rxdataring_enabled is true before calling memcpy() in vmxnet3_rq_rx_complete(). [1728352.477993] ethtool: page allocation failure: order:9, mode:0x6000c0(GFP_KERNEL), nodemask=(null),cpuset=/,mems_allowed=0 ... [1728352.478009] Call Trace: [1728352.478028] dump_stack+0x41/0x60 [1728352.478035] warn_alloc.cold.120+0x7b/0x11b [1728352.478038] ? _cond_resched+0x15/0x30 [1728352.478042] ? __alloc_pages_direct_compact+0x15f/0x170 [1728352.478043] __alloc_pages_slowpath+0xcd3/0xd10 [1728352.478047] __alloc_pages_nodemask+0x2e2/0x320 [1728352.478049] __dma_direct_alloc_pages.constprop.25+0x8a/0x120 [1728352.478053] dma_direct_alloc+0x5a/0x2a0 [1728352.478056] vmxnet3_rq_create.part.57+0x17c/0x1f0 [vmxnet3] ... [1728352.478188] vmxnet3 0000:0b:00.0 ens192: rx data ring will be disabled ... [1728352.515347] BUG: unable to handle kernel NULL pointer dereference at 0000000000000034 ... [1728352.515440] RIP: 0010:memcpy_orig+0x54/0x130 ... [1728352.515655] Call Trace: [1728352.515665] <IRQ> [1728352.515672] vmxnet3_rq_rx_complete+0x419/0xef0 [vmxnet3] [1728352.515690] vmxnet3_poll_rx_only+0x31/0xa0 [vmxnet3] ... Signed-off-by: Seiji Nishikawa <snishika@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-19bonding: Fix memory leak when changing bond type to EthernetIdo Schimmel1-3/+4
When a net device is put administratively up, its 'IFF_UP' flag is set (if not set already) and a 'NETDEV_UP' notification is emitted, which causes the 8021q driver to add VLAN ID 0 on the device. The reverse happens when a net device is put administratively down. When changing the type of a bond to Ethernet, its 'IFF_UP' flag is incorrectly cleared, resulting in the kernel skipping the above process and VLAN ID 0 being leaked [1]. Fix by restoring the flag when changing the type to Ethernet, in a similar fashion to the restoration of the 'IFF_SLAVE' flag. The issue can be reproduced using the script in [2], with example out before and after the fix in [3]. [1] unreferenced object 0xffff888103479900 (size 256): comm "ip", pid 329, jiffies 4294775225 (age 28.561s) hex dump (first 32 bytes): 00 a0 0c 15 81 88 ff ff 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff81a6051a>] kmalloc_trace+0x2a/0xe0 [<ffffffff8406426c>] vlan_vid_add+0x30c/0x790 [<ffffffff84068e21>] vlan_device_event+0x1491/0x21a0 [<ffffffff81440c8e>] notifier_call_chain+0xbe/0x1f0 [<ffffffff8372383a>] call_netdevice_notifiers_info+0xba/0x150 [<ffffffff837590f2>] __dev_notify_flags+0x132/0x2e0 [<ffffffff8375ad9f>] dev_change_flags+0x11f/0x180 [<ffffffff8379af36>] do_setlink+0xb96/0x4060 [<ffffffff837adf6a>] __rtnl_newlink+0xc0a/0x18a0 [<ffffffff837aec6c>] rtnl_newlink+0x6c/0xa0 [<ffffffff837ac64e>] rtnetlink_rcv_msg+0x43e/0xe00 [<ffffffff839a99e0>] netlink_rcv_skb+0x170/0x440 [<ffffffff839a738f>] netlink_unicast+0x53f/0x810 [<ffffffff839a7fcb>] netlink_sendmsg+0x96b/0xe90 [<ffffffff8369d12f>] ____sys_sendmsg+0x30f/0xa70 [<ffffffff836a6d7a>] ___sys_sendmsg+0x13a/0x1e0 unreferenced object 0xffff88810f6a83e0 (size 32): comm "ip", pid 329, jiffies 4294775225 (age 28.561s) hex dump (first 32 bytes): a0 99 47 03 81 88 ff ff a0 99 47 03 81 88 ff ff ..G.......G..... 81 00 00 00 01 00 00 00 cc cc cc cc cc cc cc cc ................ backtrace: [<ffffffff81a6051a>] kmalloc_trace+0x2a/0xe0 [<ffffffff84064369>] vlan_vid_add+0x409/0x790 [<ffffffff84068e21>] vlan_device_event+0x1491/0x21a0 [<ffffffff81440c8e>] notifier_call_chain+0xbe/0x1f0 [<ffffffff8372383a>] call_netdevice_notifiers_info+0xba/0x150 [<ffffffff837590f2>] __dev_notify_flags+0x132/0x2e0 [<ffffffff8375ad9f>] dev_change_flags+0x11f/0x180 [<ffffffff8379af36>] do_setlink+0xb96/0x4060 [<ffffffff837adf6a>] __rtnl_newlink+0xc0a/0x18a0 [<ffffffff837aec6c>] rtnl_newlink+0x6c/0xa0 [<ffffffff837ac64e>] rtnetlink_rcv_msg+0x43e/0xe00 [<ffffffff839a99e0>] netlink_rcv_skb+0x170/0x440 [<ffffffff839a738f>] netlink_unicast+0x53f/0x810 [<ffffffff839a7fcb>] netlink_sendmsg+0x96b/0xe90 [<ffffffff8369d12f>] ____sys_sendmsg+0x30f/0xa70 [<ffffffff836a6d7a>] ___sys_sendmsg+0x13a/0x1e0 [2] ip link add name t-nlmon type nlmon ip link add name t-dummy type dummy ip link add name t-bond type bond mode active-backup ip link set dev t-bond up ip link set dev t-nlmon master t-bond ip link set dev t-nlmon nomaster ip link show dev t-bond ip link set dev t-dummy master t-bond ip link show dev t-bond ip link del dev t-bond ip link del dev t-dummy ip link del dev t-nlmon [3] Before: 12: t-bond: <NO-CARRIER,BROADCAST,MULTICAST,MASTER,UP> mtu 1500 qdisc noqueue state DOWN mode DEFAULT group default qlen 1000 link/netlink 12: t-bond: <BROADCAST,MULTICAST,MASTER,LOWER_UP> mtu 1500 qdisc noqueue state UP mode DEFAULT group default qlen 1000 link/ether 46:57:39:a4:46:a2 brd ff:ff:ff:ff:ff:ff After: 12: t-bond: <NO-CARRIER,BROADCAST,MULTICAST,MASTER,UP> mtu 1500 qdisc noqueue state DOWN mode DEFAULT group default qlen 1000 link/netlink 12: t-bond: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP mode DEFAULT group default qlen 1000 link/ether 66:48:7b:74:b6:8a brd ff:ff:ff:ff:ff:ff Fixes: e36b9d16c6a6 ("bonding: clean muticast addresses when device changes type") Fixes: 75c78500ddad ("bonding: remap muticast addresses without using dev_close() and dev_open()") Fixes: 9ec7eb60dcbc ("bonding: restore IFF_MASTER/SLAVE flags on bond enslave ether type change") Reported-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr> Link: https://lore.kernel.org/netdev/78a8a03b-6070-3e6b-5042-f848dab16fb8@alu.unizg.hr/ Tested-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-19drm/amd/display: fix a divided-by-zero errorAlex Hung1-0/+4
[Why & How] timing.dsc_cfg.num_slices_v can be zero and it is necessary to check before using it. This fixes the error "divide error: 0000 [#1] PREEMPT SMP NOPTI". Reviewed-by: Aurabindo Pillai <Aurabindo.Pillai@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2023-04-19drm/amd/display: limit timing for single dimm memoryDaniel Miess1-0/+20
[Why] 1. It could hit bandwidth limitdation under single dimm memory when connecting 8K external monitor. 2. IsSupportedVidPn got validation failed with 2K240Hz eDP + 8K24Hz external monitor. 3. It's better to filter out such combination in EnumVidPnCofuncModality 4. For short term, filter out in dc bandwidth validation. [How] Force 2K@240Hz+8K@24Hz timing validation false in dc. Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Daniel Miess <Daniel.Miess@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2023-04-19drm/amd/display: set dcn315 lb bpp to 48Dmytro Laktyushkin1-1/+1
[Why & How] Fix a typo for dcn315 line buffer bpp. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2023-04-19drm/amdgpu: Fix desktop freezed after gpu-resetAlan Liu2-3/+17
[Why] After gpu-reset, sometimes the driver fails to enable vblank irq, causing flip_done timed out and the desktop freezed. During gpu-reset, we disable and enable vblank irq in dm_suspend() and dm_resume(). Later on in amdgpu_irq_gpu_reset_resume_helper(), we check irqs' refcount and decide to enable or disable the irqs again. However, we have 2 sets of API for controling vblank irq, one is dm_vblank_get/put() and another is amdgpu_irq_get/put(). Each API has its own refcount and flag to store the state of vblank irq, and they are not synchronized. In drm we use the first API to control vblank irq but in amdgpu_irq_gpu_reset_resume_helper() we use the second set of API. The failure happens when vblank irq was enabled by dm_vblank_get() before gpu-reset, we have vblank->enabled true. However, during gpu-reset, in amdgpu_irq_gpu_reset_resume_helper() vblank irq's state checked from amdgpu_irq_update() is DISABLED. So finally it disables vblank irq again. After gpu-reset, if there is a cursor plane commit, the driver will try to enable vblank irq by calling drm_vblank_enable(), but the vblank->enabled is still true, so it fails to turn on vblank irq and causes flip_done can't be completed in vblank irq handler and desktop become freezed. [How] Combining the 2 vblank control APIs by letting drm's API finally calls amdgpu_irq's API, so the irq's refcount and state of both APIs can be synchronized. Also add a check to prevent refcount from being less then 0 in amdgpu_irq_put(). v2: - Add warning in amdgpu_irq_enable() if the irq is already disabled. - Call dc_interrupt_set() in dm_set_vblank() to avoid refcount change if it is in gpu-reset. v3: - Improve commit message and code comments. Signed-off-by: Alan Liu <HaoPing.Liu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2023-04-18veth: take into account peer device for NETDEV_XDP_ACT_NDO_XMIT xdp_features ↵Lorenzo Bianconi1-6/+11
flag For veth pairs, NETDEV_XDP_ACT_NDO_XMIT is supported by the current device if the peer one is running a XDP program or if it has GRO enabled. Fix the xdp_features flags reporting considering peer device and not current one for NETDEV_XDP_ACT_NDO_XMIT. Fixes: fccca038f300 ("veth: take into account device reconfiguration for xdp_features flag") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/4f1ca6f6f6b42ae125bfdb5c7782217c83968b2e.1681767806.git.lorenzo@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-04-18Merge tag 'mmc-v6.3-rc3' of ↵Linus Torvalds2-3/+4
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fixes from Ulf Hansson: "MMC host: - sdhci_am654: Fix support for UHS-I SDR12 and SDR25 speed modes MEMSTICK: - Fix memory leak if card device never gets registered" * tag 'mmc-v6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: memstick: fix memory leak if card device is never registered mmc: sdhci_am654: Set HIGH_SPEED_ENA for SDR12 and SDR25
2023-04-18Merge tag 'arm-fixes-6.3-3' of ↵Linus Torvalds4-20/+21
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "There are a number of updates for devicetree files for Qualcomm, Rockchips, and NXP i.MX platforms, addressing mistakes in the DT contents: - Wrong GPIO polarity on some boards - Lower SD card interface speed for better stability - Incorrect power supply, clock, pmic, cache properties - Disable broken hbr3 on sc7280-herobrine - Devicetree warning fixes The only other changes are: - A regression fix for the Amlogic performance monitoring unit driver, along with two related DT changes. - imx_v6_v7_defconfig enables PCI support again. - Trivial fixes for tee, optee and psci firmware drivers, addressing compiler warning and error output" * tag 'arm-fixes-6.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (32 commits) firmware/psci: demote suspend-mode warning to info level arm64: dts: qcom: sc7280: remove hbr3 support on herobrine boards ARM: imx_v6_v7_defconfig: Fix unintentional disablement of PCI arm64: dts: rockchip: correct panel supplies on some rk3326 boards arm64: dts: rockchip: use just "port" in panel on RockPro64 arm64: dts: rockchip: use just "port" in panel on Pinebook Pro ARM: dts: imx6ull-colibri: Remove unnecessary #address-cells/#size-cells ARM: dts: imx7d-remarkable2: Remove unnecessary #address-cells/#size-cells arm64: dts: imx8mp-verdin: correct off-on-delay arm64: dts: imx8mm-verdin: correct off-on-delay arm64: dts: imx8mm-evk: correct pmic clock source arm64: dts: qcom: sc8280xp-pmics: fix pon compatible and registers arm64: dts: rockchip: Remove non-existing pwm-delay-us property arm64: dts: rockchip: Add clk_rtc_32k to Anbernic xx3 Devices tee: Pass a pointer to virt_to_page() perf/amlogic: adjust register offsets arm64: dts: meson-g12-common: resolve conflict between canvas & pmu arm64: dts: meson-g12-common: specify full DMC range arm64: dts: imx8mp: fix address length for LCDIF2 riscv: dts: canaan: drop invalid spi-max-frequency ...
2023-04-18mlxfw: fix null-ptr-deref in mlxfw_mfa2_tlv_next()Nikita Zhandarovich1-0/+2
Function mlxfw_mfa2_tlv_multi_get() returns NULL if 'tlv' in question does not pass checks in mlxfw_mfa2_tlv_payload_get(). This behaviour may lead to NULL pointer dereference in 'multi->total_len'. Fix this issue by testing mlxfw_mfa2_tlv_multi_get()'s return value against NULL. Found by Linux Verification Center (linuxtesting.org) with static analysis tool SVACE. Fixes: 410ed13cae39 ("Add the mlxfw module for Mellanox firmware flash process") Co-developed-by: Natalia Petrova <n.petrova@fintech.ru> Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://lore.kernel.org/r/20230417120718.52325-1-n.zhandarovich@fintech.ru Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-04-18bnxt_en: Fix a possible NULL pointer dereference in unload pathKalesh AP1-9/+10
In the driver unload path, the driver currently checks the valid BNXT_FLAG_ROCE_CAP flag in bnxt_rdma_aux_device_uninit() before proceeding. This is flawed because the flag may not be set initially during driver load. It may be set later after the NVRAM setting is changed followed by a firmware reset. Relying on the BNXT_FLAG_ROCE_CAP flag may crash in bnxt_rdma_aux_device_uninit() if the aux device was never initialized: BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 PGD 8ae6aa067 P4D 0 Oops: 0000 [#1] SMP NOPTI CPU: 39 PID: 42558 Comm: rmmod Kdump: loaded Tainted: G OE --------- - - 4.18.0-348.el8.x86_64 #1 Hardware name: Dell Inc. PowerEdge R750/0WT8Y6, BIOS 1.5.4 12/17/2021 RIP: 0010:device_del+0x1b/0x410 Code: 89 a5 50 03 00 00 4c 89 a5 58 03 00 00 eb 89 0f 1f 44 00 00 41 56 41 55 41 54 4c 8d a7 80 00 00 00 55 53 48 89 fb 48 83 ec 18 <48> 8b 2f 4c 89 e7 65 48 8b 04 25 28 00 00 00 48 89 44 24 10 31 c0 RSP: 0018:ff7f82bf469a7dc8 EFLAGS: 00010292 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000206 RDI: 0000000000000000 RBP: ff31b7cd114b0ac0 R08: 0000000000000000 R09: ffffffff935c3400 R10: ff31b7cd45bc3440 R11: 0000000000000001 R12: 0000000000000080 R13: ffffffffc1069f40 R14: 0000000000000000 R15: 0000000000000000 FS: 00007fc9903ce740(0000) GS:ff31b7d4ffac0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000992fee004 CR4: 0000000000773ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: bnxt_rdma_aux_device_uninit+0x1f/0x30 [bnxt_en] bnxt_remove_one+0x2f/0x1f0 [bnxt_en] pci_device_remove+0x3b/0xc0 device_release_driver_internal+0x103/0x1f0 driver_detach+0x54/0x88 bus_remove_driver+0x77/0xc9 pci_unregister_driver+0x2d/0xb0 bnxt_exit+0x16/0x2c [bnxt_en] __x64_sys_delete_module+0x139/0x280 do_syscall_64+0x5b/0x1a0 entry_SYSCALL_64_after_hwframe+0x65/0xca RIP: 0033:0x7fc98f3af71b Fix this by modifying the check inside bnxt_rdma_aux_device_uninit() to check for bp->aux_priv instead. We also need to make some changes in bnxt_rdma_aux_device_init() to make sure that bp->aux_priv is set only when the aux device is fully initialized. Fixes: d80d88b0dfff ("bnxt_en: Add auxiliary driver support") Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com> Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-04-18bnxt_en: Do not initialize PTP on older P3/P4 chipsMichael Chan1-1/+1
The driver does not support PTP on these older chips and it is assuming that firmware on these older chips will not return the PORT_MAC_PTP_QCFG_RESP_FLAGS_HWRM_ACCESS flag in __bnxt_hwrm_ptp_qcfg(), causing the function to abort quietly. But newer firmware now sets this flag and so __bnxt_hwrm_ptp_qcfg() will proceed further. Eventually it will fail in bnxt_ptp_init() -> bnxt_map_ptp_regs() because there is no code to support the older chips. The driver will then complain: "PTP initialization failed.\n" Fix it so that we abort quietly earlier without going through the unnecessary steps and alarming the user with the warning log. Fixes: ae5c42f0b92c ("bnxt_en: Get PTP hardware capability from firmware") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-04-18cxgb4: fix use after free bugs caused by circular dependency problemDuoming Zhou1-1/+1
The flower_stats_timer can schedule flower_stats_work and flower_stats_work can also arm the flower_stats_timer. The process is shown below: ----------- timer schedules work ------------ ch_flower_stats_cb() //timer handler schedule_work(&adap->flower_stats_work); ----------- work arms timer ------------ ch_flower_stats_handler() //workqueue callback function mod_timer(&adap->flower_stats_timer, ...); When the cxgb4 device is detaching, the timer and workqueue could still be rearmed. The process is shown below: (cleanup routine) | (timer and workqueue routine) remove_one() | free_some_resources() | ch_flower_stats_cb() //timer cxgb4_cleanup_tc_flower() | schedule_work() del_timer_sync() | | ch_flower_stats_handler() //workqueue | mod_timer() cancel_work_sync() | kfree(adapter) //FREE | ch_flower_stats_cb() //timer | adap->flower_stats_work //USE This patch changes del_timer_sync() to timer_shutdown_sync(), which could prevent rearming of the timer from the workqueue. Fixes: e0f911c81e93 ("cxgb4: fetch stats for offloaded tc flower flows") Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Link: https://lore.kernel.org/r/20230415081227.7463-1-duoming@zju.edu.cn Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-04-18drm/rockchip: vop2: Use regcache_sync() to fix suspend/resumeSascha Hauer1-7/+3
afa965a45e01 ("drm/rockchip: vop2: fix suspend/resume") uses regmap_reinit_cache() to fix the suspend/resume issue with the VOP2 driver. During discussion it came up that we should rather use regcache_sync() instead. As the original patch is already applied fix this up in this follow-up patch. Fixes: afa965a45e01 ("drm/rockchip: vop2: fix suspend/resume") Cc: stable@vger.kernel.org Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230417123747.2179695-1-s.hauer@pengutronix.de
2023-04-17i40e: fix i40e_setup_misc_vector() error handlingAleksandr Loktionov1-1/+4
Add error handling of i40e_setup_misc_vector() in i40e_rebuild(). In case interrupt vectors setup fails do not re-open vsi-s and do not bring up vf-s, we have no interrupts to serve a traffic anyway. Fixes: 41c445ff0f48 ("i40e: main driver core") Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-04-17i40e: fix accessing vsi->active_filters without holding lockAleksandr Loktionov1-2/+2
Fix accessing vsi->active_filters without holding the mac_filter_hash_lock. Move vsi->active_filters = 0 inside critical section and move clear_bit(__I40E_VSI_OVERFLOW_PROMISC, vsi->state) after the critical section to ensure the new filters from other threads can be added only after filters cleaning in the critical section is finished. Fixes: 278e7d0b9d68 ("i40e: store MAC/VLAN filters in a hash with the MAC Address as key") Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-04-17drm/nouveau: fix incorrect conversion to dma_resv_wait_timeout()John Ogness1-6/+12
Commit 41d351f29528 ("drm/nouveau: stop using ttm_bo_wait") converted from ttm_bo_wait_ctx() to dma_resv_wait_timeout(). However, dma_resv_wait_timeout() returns greater than zero on success as opposed to ttm_bo_wait_ctx(). As a result, relocs will fail and log errors even when it was a success. Change the return code handling to match that of nouveau_gem_ioctl_cpu_prep(), which was already using dma_resv_wait_timeout() correctly. Fixes: 41d351f29528 ("drm/nouveau: stop using ttm_bo_wait") Reported-by: Tanmay Bhushan <007047221b@gmail.com> Link: https://lore.kernel.org/lkml/20230119225351.71657-1-007047221b@gmail.com Signed-off-by: John Ogness <john.ogness@linutronix.de> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Karol Herbst <kherbst@redhat.com> Signed-off-by: Karol Herbst <kherbst@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/87edolaomt.fsf@jogness.linutronix.de
2023-04-17drm/rockchip: vop2: fix suspend/resumeSascha Hauer1-0/+8
During a suspend/resume cycle the VO power domain will be disabled and the VOP2 registers will reset to their default values. After that the cached register values will be out of sync and the read/modify/write operations we do on the window registers will result in bogus values written. Fix this by re-initializing the register cache each time we enable the VOP2. With this the VOP2 will show a picture after a suspend/resume cycle whereas without this the screen stays dark. Fixes: 604be85547ce4 ("drm/rockchip: Add VOP2 driver") Cc: stable@vger.kernel.org Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Tested-by: Chris Morgan <macromorgan@hotmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230413144347.3506023-1-s.hauer@pengutronix.de
2023-04-17drm/i915: Fix fast wake AUX sync lenVille Syrjälä1-1/+1
Fast wake should use 8 SYNC pulses for the preamble and 10-16 SYNC pulses for the precharge. Reduce our fast wake SYNC count to match the maximum value. We also use the maximum precharge length for normal AUX transactions. Cc: stable@vger.kernel.org Cc: Jouni Högander <jouni.hogander@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230329172434.18744-1-ville.syrjala@linux.intel.com Reviewed-by: Jouni Högander <jouni.hogander@intel.com> (cherry picked from commit 605f7c73133341d4b762cbd9a22174cc22d4c38b) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-26 06:16:20 +0300