summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2023-05-16spi: dw: Replace spi->chip_select references with function callsAmit Kumar Mahapatra1-4/+4
New set/get APIs for accessing spi->chip_select were introduced by 'commit 9e264f3f85a5 ("spi: Replace all spi->chip_select and spi->cs_gpiod references with function call")', but the 'commit 2c8606040a80 ("spi: dw: Add support for AMD Pensando Elba SoC")' uses the old interface by directly accessing spi->chip_select. So, replace all spi->chip_select references in the driver with new get/set APIs. Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@amd.com Acked-by: Serge Semin <fancer.lancer@gmail.com Link: https://lore.kernel.org/r/20230515130343.63770-1-amit.kumar-mahapatra@amd.com Signed-off-by: Mark Brown <broonie@kernel.org
2023-05-16regulator: Fix error checking for debugfs_create_dirOsama Muhammad1-2/+2
This patch fixes the error checking in core.c in debugfs_create_dir. The correct way to check if an error occurred is 'IS_ERR' inline function. Signed-off-by: Osama Muhammad <osmtendev@gmail.com Suggested-by: Ivan Orlov <ivan.orlov0322@gmail.com Link: https://lore.kernel.org/r/20230515172938.13338-1-osmtendev@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org
2023-05-16tpm/tpm_tis: Disable interrupts for more Lenovo devicesJerry Snitselaar1-0/+16
The P360 Tiny suffers from an irq storm issue like the T490s, so add an entry for it to tpm_tis_dmi_table, and force polling. There also previously was a report from the previous attempt to enable interrupts that involved a ThinkPad L490. So an entry is added for it as well. Cc: stable@vger.kernel.org Reported-by: Peter Zijlstra <peterz@infradead.org> # P360 Tiny Closes: https://lore.kernel.org/linux-integrity/20230505130731.GO83892@hirez.programming.kicks-ass.net/ Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2023-05-16tpm: Prevent hwrng from activating during resumeJarkko Sakkinen2-0/+14
Set TPM_CHIP_FLAG_SUSPENDED in tpm_pm_suspend() and reset in tpm_pm_resume(). While the flag is set, tpm_hwrng() gives back zero bytes. This prevents hwrng from racing during resume. Cc: stable@vger.kernel.org Fixes: 6e592a065d51 ("tpm: Move Linux RNG connection to hwrng") Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2023-05-16tpm_tis: Use tpm_chip_{start,stop} decoration inside tpm_tis_resumeJarkko Sakkinen1-24/+19
Before sending a TPM command, CLKRUN protocol must be disabled. This is not done in the case of tpm1_do_selftest() call site inside tpm_tis_resume(). Address this by decorating the calls with tpm_chip_{start,stop}, which should be always used to arm and disarm the TPM chip for transmission. Finally, move the call to the main TPM driver callback as the last step because it should arm the chip by itself, if it needs that type of functionality. Cc: stable@vger.kernel.org Reported-by: Jason A. Donenfeld <Jason@zx2c4.com> Closes: https://lore.kernel.org/linux-integrity/CS68AWILHXS4.3M36M1EKZLUMS@suppilovahvero/ Fixes: a3fbfae82b4c ("tpm: take TPM chip power gating out of tpm_transmit()") Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2023-05-16power: supply: mt6360: add a check of devm_work_autocancel in ↵Kang Chen1-1/+3
mt6360_charger_probe devm_work_autocancel may fail, add a check and return early. Fixes: 0402e8ebb8b86 ("power: supply: mt6360_charger: add MT6360 charger support") Signed-off-by: Kang Chen <void0red@gmail.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2023-05-16power: supply: sbs-charger: Fix INHIBITED bit for Status regDaisuke Nojiri1-1/+1
CHARGE_INHIBITED bit position of the ChargerStatus register is actually 0 not 1. This patch corrects it. Fixes: feb583e37f8a8 ("power: supply: add sbs-charger driver") Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2023-05-15can: bxcan: add support for single peripheral configurationDario Binacchi1-11/+23
Add support for bxCAN controller in single peripheral configuration: - primary bxCAN - dedicated Memory Access Controller unit - 512-byte SRAM memory - 14 filter banks Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Link: https://lore.kernel.org/all/20230427204540.3126234-5-dario.binacchi@amarulasolutions.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-05-15can: CAN_BXCAN should depend on ARCH_STM32Geert Uytterhoeven1-1/+1
The STMicroelectronics STM32 basic extended CAN Controller (bxCAN) is only present on STM32 SoCs. Hence drop the "|| OF" part from its dependency rule, to prevent asking the user about this driver when configuring a kernel without STM32 SoC support. Fixes: f00647d8127be4d3 ("can: bxcan: add support for ST bxCAN controller") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/all/40095112efd1b2214e4223109fd9f0c6d0158a2d.1680609318.git.geert+renesas@glider.be Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-05-15can: dev: fix missing CAN XL support in can_put_echo_skb()Oliver Hartkopp1-1/+2
can_put_echo_skb() checks for the enabled IFF_ECHO flag and the correct ETH_P type of the given skbuff. When implementing the CAN XL support the new check for ETH_P_CANXL has been forgotten. Fixes: fb08cba12b52 ("can: canxl: update CAN infrastructure for CAN XL frames") Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://lore.kernel.org/all/20230506184515.39241-1-socketcan@hartkopp.net Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-05-15wifi: rtl8xxxu: fix authentication timeout due to incorrect RCR valueYun Lu2-1/+4
When using rtl8192cu with rtl8xxxu driver to connect wifi, there is a probability of failure, which shows "authentication with ... timed out". Through debugging, it was found that the RCR register has been inexplicably modified to an incorrect value, resulting in the nic not being able to receive authenticated frames. To fix this problem, add regrcr in rtl8xxxu_priv struct, and store the RCR value every time the register is written, and use it the next time the register need to be modified. Signed-off-by: Yun Lu <luyun@kylinos.cn> Link: https://lore.kernel.org/all/20230427020512.1221062-1-luyun_611@163.com Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230512012055.2990472-1-luyun_611@163.com
2023-05-15wifi: brcmfmac: Check for probe() id argument being NULLHans de Goede3-0/+27
The probe() id argument may be NULL in 2 scenarios: 1. brcmf_pcie_pm_leave_D3() calling brcmf_pcie_probe() to reprobe the device. 2. If a user tries to manually bind the driver from sysfs then the sdio / pcie / usb probe() function gets called with NULL as id argument. 1. Is being hit by users causing the following oops on resume and causing wifi to stop working: BUG: kernel NULL pointer dereference, address: 0000000000000018 <snip> Hardware name: Dell Inc. XPS 13 9350/0PWNCR, BIDS 1.13.0 02/10/2020 Workgueue: events_unbound async_run_entry_fn RIP: 0010:brcmf_pcie_probe+Ox16b/0x7a0 [brcmfmac] <snip> Call Trace: <TASK> brcmf_pcie_pm_leave_D3+0xc5/8x1a0 [brcmfmac be3b4cefca451e190fa35be8f00db1bbec293887] ? pci_pm_resume+0x5b/0xf0 ? pci_legacy_resume+0x80/0x80 dpm_run_callback+0x47/0x150 device_resume+0xa2/0x1f0 async_resume+0x1d/0x30 <snip> Fix this by checking for id being NULL. In the PCI and USB cases try a manual lookup of the id so that manually binding the driver through sysfs and more importantly brcmf_pcie_probe() on resume will work. For the SDIO case there is no helper to do a manual sdio_device_id lookup, so just directly error out on a NULL id there. Fixes: da6d9c8ecd00 ("wifi: brcmfmac: add firmware vendor info in driver info") Reported-by: Felix <nimrod4garoa@gmail.com> Link: https://lore.kernel.org/regressions/4ef3f252ff530cbfa336f5a0d80710020fc5cb1e.camel@gmail.com/ Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230510141856.46532-1-hdegoede@redhat.com
2023-05-15wifi: rtw88: correct qsel_to_ep[] type as intPing-Ke Shih1-1/+1
qsel_to_ep[] can be assigned negative value, so change type from 'u8' to 'int'. Otherwise, Smatch static checker warns: drivers/net/wireless/realtek/rtw88/usb.c:219 rtw_usb_parse() warn: assigning (-22) to unsigned variable 'rtwusb->qsel_to_ep[8]' Cc: stable@vger.kernel.org Fixes: a6f187f92bcc ("wifi: rtw88: usb: fix priority queue to endpoint mapping") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/linux-wireless/c3f70197-829d-48ed-ae15-66a9de80fa90@kili.mountain/ Cc: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Tested-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230508085539.46795-1-pkshih@realtek.com
2023-05-15cpufreq: ACPI: Prevent a warning when another frequency driver is loadedPetr Pavlu2-2/+2
The recent change to use platform devices to load ACPI PPC and PCC drivers caused that a misleading warning is reported when a respective module cannot be loaded because another CPU frequency driver is already registered: kernel: acpi-cpufreq: probe of acpi-cpufreq failed with error -17 Address it by changing the return code in acpi-cpufreq and pcc-cpufreq for this case from -EEXIST to -ENODEV which silences the warning in call_driver_probe(). The change has also a benefit for users of init_module() as this return code is propagated out from the syscall. The previous -EEXIST code made the callers, such as kmod, wrongly believe that the module was already loaded instead of that it failed to load. Fixes: 691a63712347 ("ACPI: cpufreq: Use platform devices to load ACPI PPC and PCC drivers") Reported-by: Kevin Locke <kevin@kevinlocke.name> Link: https://lore.kernel.org/lkml/ZFreh8SDMX67EaB6@kevinlocke.name/ Signed-off-by: Petr Pavlu <petr.pavlu@suse.com> Tested-by: Kevin Locke <kevin@kevinlocke.name> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-05-15platform/mellanox: mlxbf-pmc: fix sscanf() error checkingDan Carpenter1-3/+2
The sscanf() function never returns negatives. It returns the number of items successfully read. Fixes: 1a218d312e65 ("platform/mellanox: mlxbf-pmc: Add Mellanox BlueField PMC driver") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/4ccdfd28-099b-40bf-8d77-ad4ea2e76b93@kili.mountain Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-05-15platform/x86/amd/pmf: Fix CnQF and auto-mode after resumeMario Limonciello1-7/+25
After suspend/resume cycle there is an error message and auto-mode or CnQF stops working. [ 5741.447511] amd-pmf AMDI0100:00: SMU cmd failed. err: 0xff [ 5741.447523] amd-pmf AMDI0100:00: AMD_PMF_REGISTER_RESPONSE:ff [ 5741.447527] amd-pmf AMDI0100:00: AMD_PMF_REGISTER_ARGUMENT:7 [ 5741.447531] amd-pmf AMDI0100:00: AMD_PMF_REGISTER_MESSAGE:16 [ 5741.447540] amd-pmf AMDI0100:00: [AUTO_MODE] avg power: 0 mW mode: QUIET This is because the DRAM address used for accessing metrics table needs to be refreshed after a suspend resume cycle. Add a resume callback to reset this again. Fixes: 1a409b35c995 ("platform/x86/amd/pmf: Get performance metrics from PMFW") Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20230513011408.958-1-mario.limonciello@amd.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-05-15platform/x86: asus-wmi: Ignore WMI events with codes 0x7B, 0xC0Alexandru Sorodoc1-0/+2
On ASUS GU604V the key 0x7B is issued when the charger is connected or disconnected, and key 0xC0 is issued when an external display is connected or disconnected. This commit maps them to KE_IGNORE to slience kernel messages about unknown keys, such as: kernel: asus_wmi: Unknown key code 0x7b Signed-off-by: Alexandru Sorodoc <ealex95@gmail.com> Link: https://lore.kernel.org/r/20230512101517.47416-1-ealex95@gmail.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-05-15ACPI: resource: Add IRQ override quirk for LG UltraPC 17U70PRubén Gómez1-0/+12
Add an ACPI IRQ override quirk for LG UltraPC 17U70P to address the internal keyboard problem on it. Link: https://bugzilla.kernel.org/show_bug.cgi?id=213031 Link: https://bugzilla.kernel.org/show_bug.cgi?id=216983 Signed-off-by: Rubén Gómez Agudo <mrgommer@proton.me> [ rjw: Subject, changelog, white space damage fixes ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-05-15s390/cio: include subchannels without devices also for evaluationVineeth Vijayan1-0/+2
Currently when the new channel-path is enabled, we do evaluation only on the subchannels with a device connected on it. This is because, in the past, if the device in the subchannel is not working or not available, we used to unregister the subchannels. But, from the 'commit 2297791c92d0 ("s390/cio: dont unregister subchannel from child-drivers")' we allow subchannels with or without an active device connected on it. So, when we do the io_subchannel_verify, make sure that, we are evaluating the subchannels without any device too. Fixes: 2297791c92d0 ("s390/cio: dont unregister subchannel from child-drivers") Reported-by: Boris Fiuczynski <fiuczy@linux.ibm.com> Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2023-05-15s390/pkey: zeroize key blobsHolger Dengler1-0/+3
Key blobs for the IOCTLs PKEY_KBLOB2PROTK[23] may contain clear key material. Zeroize the copies of these keys in kernel memory after creating the protected key. Reviewed-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Holger Dengler <dengler@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2023-05-15net: phylink: fix ksettings_set() ethtool callRussell King (Oracle)1-4/+4
While testing a Fiberstore SFP-10G-T module (which uses 10GBASE-R with rate adaption) in a Clearfog platform (which can't do that) it was found that the PHYs advertisement was not limited according to the hosts capabilities when using ethtool to change it. Fix this by ensuring that we mask the advertisement with the computed support mask as the very first thing we do. Fixes: cbc1bb1e4689 ("net: phylink: simplify phy case for ksettings_set method") Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-15net: mdio: i2c: fix rollball accessorsRussell King (Oracle)1-7/+8
Commit 87e3bee0f247 ("net: mdio: i2c: Separate C22 and C45 transactions") separated the non-rollball bus accessors, but left the rollball accessors as is. As rollball accessors are clause 45, this results in the rollball protocol being completely non-functional. Fix this. Fixes: 87e3bee0f247 ("net: mdio: i2c: Separate C22 and C45 transactions") Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-15virtio_net: Fix error unwinding of XDP initializationFeng Liu1-17/+44
When initializing XDP in virtnet_open(), some rq xdp initialization may hit an error causing net device open failed. However, previous rqs have already initialized XDP and enabled NAPI, which is not the expected behavior. Need to roll back the previous rq initialization to avoid leaks in error unwinding of init code. Also extract helper functions of disable and enable queue pairs. Use newly introduced disable helper function in error unwinding and virtnet_close. Use enable helper function in virtnet_open. Fixes: 754b8a21a96d ("virtio_net: setup xdp_rxq_info") Signed-off-by: Feng Liu <feliu@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: William Tu <witu@nvidia.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-15net: fec: remove the xdp_return_frame when lack of tx BDsShenwei Wang1-1/+0
In the implementation, the sent_frame count does not increment when transmit errors occur. Therefore, bq_xmit_all() will take care of returning the XDP frames. Fixes: 26312c685ae0 ("net: fec: correct the counting of XDP sent frames") Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-15drm/i915/hdcp: Check if media_gt existsSuraj Kandpal1-4/+6
Check if media_gt exists if we are using gsc cs --v2 -correct typo [Ankit] -assign gsc variable if gt exists [Ankit] --v3 -declare gsc and gt variables in if block [Ankit] --v4 -add fixes tag [Ankit] Fixes: 883631771038 ("drm/i915/mtl: Add HDCP GSC interface") Cc: Tomas Winkler <tomas.winkler@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Uma Shankar <uma.shankar@intel.com> Cc: Anshuman Gupta <anshuman.gupta@intel.com> Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com> Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com> Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230505041512.585486-1-suraj.kandpal@intel.com (cherry picked from commit 6986f05b557bf1efea5bac8dbdffb7ee89d0cf77) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2023-05-15tee: amdtee: Add return_origin to 'struct tee_cmd_load_ta'Rijo Thomas2-17/+23
After TEE has completed processing of TEE_CMD_ID_LOAD_TA, set proper value in 'return_origin' argument passed by open_session() call. To do so, add 'return_origin' field to the structure tee_cmd_load_ta. The Trusted OS shall update return_origin as part of TEE processing. This change to 'struct tee_cmd_load_ta' interface requires a similar update in AMD-TEE Trusted OS's TEE_CMD_ID_LOAD_TA interface. This patch has been verified on Phoenix Birman setup. On older APUs, return_origin value will be 0. Cc: stable@vger.kernel.org Fixes: 757cc3e9ff1d ("tee: add AMD-TEE driver") Tested-by: Sourabh Das <sourabh.das@amd.com> Signed-off-by: Rijo Thomas <Rijo-john.Thomas@amd.com> Acked-by: Sumit Garg <sumit.garg@linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2023-05-15drm/exynos: fix g2d_open/close helper function definitionsArnd Bergmann1-2/+2
The empty stub functions are defined as global functions, which causes a warning because of missing prototypes: drivers/gpu/drm/exynos/exynos_drm_g2d.h:37:5: error: no previous prototype for 'g2d_open' drivers/gpu/drm/exynos/exynos_drm_g2d.h:42:5: error: no previous prototype for 'g2d_close' Mark them as 'static inline' to avoid the warning and to make them behave as intended. Fixes: eb4d9796fa34 ("drm/exynos: g2d: Convert to driver component API") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2023-05-15soc: qcom: rpmh-rsc: drop redundant unsigned >=0 comparisionKrzysztof Kozlowski1-1/+1
Unsigned int "minor" is always >= 0 as reported by Smatch: drivers/soc/qcom/rpmh-rsc.c:1076 rpmh_rsc_probe() warn: always true condition '(drv->ver.minor >= 0) => (0-u32max >= 0)' Fixes: 88704a0cd719 ("soc: qcom: rpmh-rsc: Support RSC v3 minor versions") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230513112913.176009-1-krzysztof.kozlowski@linaro.org
2023-05-15soc: qcom: icc-bwmon: fix incorrect error code passed to dev_err_probe()Krzysztof Kozlowski1-2/+2
Pass to dev_err_probe() PTR_ERR from actual dev_pm_opp_find_bw_floor() call which failed, instead of previous ret which at this point is 0. Failure of dev_pm_opp_find_bw_floor() would result in prematurely ending the probe with success. Fixes smatch warnings: drivers/soc/qcom/icc-bwmon.c:776 bwmon_probe() warn: passing zero to 'dev_err_probe' drivers/soc/qcom/icc-bwmon.c:781 bwmon_probe() warn: passing zero to 'dev_err_probe' Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <error27@gmail.com> Link: https://lore.kernel.org/r/202305131657.76XeHDjF-lkp@intel.com/ Cc: <stable@vger.kernel.org> Fixes: b9c2ae6cac40 ("soc: qcom: icc-bwmon: Add bandwidth monitoring driver") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230513111747.132532-1-krzysztof.kozlowski@linaro.org
2023-05-15spi: spi-cadence: Only overlap FIFO transactions in slave modeCharles Keepax1-7/+8
Commit b1b90514eaa3 ("spi: spi-cadence: Add support for Slave mode") updated the code to trigger the IRQ when the FIFO was half empty, overlapping filling more data into the FIFO and sending what is left. This appears to cause regressions on the Zynq 7000, for transactions longer than the FIFO size, below that no overlapping occurs. It would appear from my testing that any attempt to put new data into the FIFO whilst data is still transmitting causes data corruption on both send and receive. If I am reading the commit message right on commit 49530e641178 ("spi: cadence: Add usleep_range() for cdns_spi_fill_tx_fifo()"), that would also seem to imply this is the case. On the assumption that this isn't an issue on the platform the original slave mode support was added for, update the cdns_transfer_one to only set the watermark to 50% of the FIFO size when in slave mode. There by retaining the new behaviour for slave mode but reverting to the older behaviour when the SPI is used a master. Fixes: b1b90514eaa3 ("spi: spi-cadence: Add support for Slave mode") Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com Link: https://lore.kernel.org/r/20230509164153.3907694-2-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org
2023-05-15spi: spi-cadence: Avoid read of RX FIFO before its readyCharles Keepax1-27/+15
Recent changes to cdns_spi_irq introduced some issues. Firstly, when writing the end of a longer transaction, the code in cdns_spi_irq will write data into the TX FIFO, then immediately fall into the if (!xspi->tx_bytes) path and attempt to read data from the RX FIFO. However this required waiting for the TX FIFO to empty before the RX data was ready. Secondly, the variable trans_cnt is now rather inaccurately named since in cases, where the watermark is set to 1, trans_cnt will be 1 but the count of bytes transferred would be much longer. Finally, when setting up the transaction we set the watermark to 50% of the FIFO if the transaction is great than 50% of the FIFO. However, there is no need to split a tranaction that is smaller than the whole FIFO, so anything up to the FIFO size can be done in a single transaction. Tidy up the code a little, to avoid repeatedly calling cdns_spi_read_rx_fifo with a count of 1, and correct the three issues noted above. Fixes: b1b90514eaa3 ("spi: spi-cadence: Add support for Slave mode") Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com Link: https://lore.kernel.org/r/20230509164153.3907694-1-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org
2023-05-15regulator: pca9450: Fix BUCK2 enable_maskAlexander Stein1-2/+2
This fixes a copy & paste error. No functional change intended, BUCK1_ENMODE_MASK equals BUCK2_ENMODE_MASK. Fixes: 0935ff5f1f0a ("regulator: pca9450: add pca9450 pmic driver") Originally-from: Robin Gong <yibin.gong@nxp.com Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de Link: https://lore.kernel.org/r/20230512081935.2396180-1-alexander.stein@ew.tq-group.com Signed-off-by: Mark Brown <broonie@kernel.org
2023-05-15power: supply: rt9467: Fix passing zero to 'dev_err_probe'ChiaEn Wu1-1/+1
Fix passing zero to 'dev_err_probe()' in 'rt9467_request_interrupt()' Fixes: 6f7f70e3a8dd ("power: supply: rt9467: Add Richtek RT9467 charger driver") Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <error27@gmail.com> Link: https://lore.kernel.org/r/202305111228.bHLWU6bq-lkp@intel.com/ Signed-off-by: ChiaEn Wu <chiaen_wu@richtek.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2023-05-14Merge tag 'cxl-fixes-6.4-rc2' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl Pull compute express link fixes from Dan Williams: - Fix a compilation issue with DEFINE_STATIC_SRCU() in the unit tests - Fix leaking kernel memory to a root-only sysfs attribute * tag 'cxl-fixes-6.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: cxl: Add missing return to cdat read error path tools/testing/cxl: Use DEFINE_STATIC_SRCU()
2023-05-14media: dvb-core: Fix use-after-free due to race condition at dvb_ca_en50221Hyunwoo Kim1-1/+36
If the device node of dvb_ca_en50221 is open() and the device is disconnected, a UAF may occur when calling close() on the device node. The root cause is that wake_up() and wait_event() for dvbdev->wait_queue are not implemented. So implement wait_event() function in dvb_ca_en50221_release() and add 'remove_mutex' which prevents race condition for 'ca->exit'. [mchehab: fix a checkpatch warning] Link: https://lore.kernel.org/linux-media/20221121063308.GA33821@ubuntu Signed-off-by: Hyunwoo Kim <v4bel@theori.io> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-05-14Merge tag 'x86_urgent_for_v6.4_rc2' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fix from Borislav Petkov: - Add the required PCI IDs so that the generic SMN accesses provided by amd_nb.c work for drivers which switch to them. Add a PCI device ID to k10temp's table so that latter is loaded on such systems too * tag 'x86_urgent_for_v6.4_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: hwmon: (k10temp) Add PCI ID for family 19, model 78h x86/amd_nb: Add PCI ID for family 19h model 78h
2023-05-14media: dvb-core: Fix kernel WARNING for blocking operation in wait_event*()Takashi Iwai1-4/+12
Using a semaphore in the wait_event*() condition is no good idea. It hits a kernel WARN_ON() at prepare_to_wait_event() like: do not call blocking ops when !TASK_RUNNING; state=1 set at prepare_to_wait_event+0x6d/0x690 For avoiding the potential deadlock, rewrite to an open-coded loop instead. Unlike the loop in wait_event*(), this uses wait_woken() after the condition check, hence the task state stays consistent. CVE-2023-31084 was assigned to this bug. Link: https://lore.kernel.org/r/CA+UBctCu7fXn4q41O_3=id1+OdyQ85tZY1x+TkT-6OVBL6KAUw@mail.gmail.com/ Link: https://lore.kernel.org/linux-media/20230512151800.1874-1-tiwai@suse.de Reported-by: Yu Hao <yhao016@ucr.edu> Closes: https://nvd.nist.gov/vuln/detail/CVE-2023-31084 Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-05-14media: dvb-core: Fix use-after-free due to race at dvb_register_device()Hyunwoo Kim1-21/+63
dvb_register_device() dynamically allocates fops with kmemdup() to set the fops->owner. And these fops are registered in 'file->f_ops' using replace_fops() in the dvb_device_open() process, and kfree()d in dvb_free_device(). However, it is not common to use dynamically allocated fops instead of 'static const' fops as an argument of replace_fops(), and UAF may occur. These UAFs can occur on any dvb type using dvb_register_device(), such as dvb_dvr, dvb_demux, dvb_frontend, dvb_net, etc. So, instead of kfree() the fops dynamically allocated in dvb_register_device() in dvb_free_device() called during the .disconnect() process, kfree() it collectively in exit_dvbdev() called when the dvbdev.c module is removed. Link: https://lore.kernel.org/linux-media/20221117045925.14297-4-imv4bel@gmail.com Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com> Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-05-14media: dvb-core: Fix use-after-free due on race condition at dvb_netHyunwoo Kim1-3/+35
A race condition may occur between the .disconnect function, which is called when the device is disconnected, and the dvb_device_open() function, which is called when the device node is open()ed. This results in several types of UAFs. The root cause of this is that you use the dvb_device_open() function, which does not implement a conditional statement that checks 'dvbnet->exit'. So, add 'remove_mutex` to protect 'dvbnet->exit' and use locked_dvb_net_open() function to check 'dvbnet->exit'. [mchehab: fix a checkpatch warning] Link: https://lore.kernel.org/linux-media/20221117045925.14297-3-imv4bel@gmail.com Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-05-14media: dvb-core: Fix use-after-free on race condition at dvb_frontendHyunwoo Kim1-9/+44
If the device node of dvb_frontend is open() and the device is disconnected, many kinds of UAFs may occur when calling close() on the device node. The root cause of this is that wake_up() for dvbdev->wait_queue is implemented in the dvb_frontend_release() function, but wait_event() is not implemented in the dvb_frontend_stop() function. So, implement wait_event() function in dvb_frontend_stop() and add 'remove_mutex' which prevents race condition for 'fe->exit'. [mchehab: fix a couple of checkpatch warnings and some mistakes at the error handling logic] Link: https://lore.kernel.org/linux-media/20221117045925.14297-2-imv4bel@gmail.com Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-05-14media: mn88443x: fix !CONFIG_OF error by drop of_match_ptr from ID tableKrzysztof Kozlowski1-1/+1
The driver will match mostly by DT table (even thought there is regular ID table) so there is little benefit in of_match_ptr (this also allows ACPI matching via PRP0001, even though it might not be relevant here). This also fixes !CONFIG_OF error: drivers/media/dvb-frontends/mn88443x.c:782:34: error: ‘mn88443x_of_match’ defined but not used [-Werror=unused-const-variable=] Link: https://lore.kernel.org/linux-media/20230312131318.351173-28-krzysztof.kozlowski@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-05-14media: ttusb-dec: fix memory leak in ttusb_dec_exit_dvb()Hyunwoo Kim1-2/+1
Since dvb_frontend_detach() is not called in ttusb_dec_exit_dvb(), which is called when the device is disconnected, dvb_frontend_free() is not finally called. This causes a memory leak just by repeatedly plugging and unplugging the device. Fix this issue by adding dvb_frontend_detach() to ttusb_dec_exit_dvb(). Link: https://lore.kernel.org/linux-media/20221117045925.14297-5-imv4bel@gmail.com Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-05-14media: dvb_ca_en50221: fix a size write bugYongSu Yoo1-5/+7
The function of "dvb_ca_en50221_write_data" at source/drivers/media /dvb-core/dvb_ca_en50221.c is used for two cases. The first case is for writing APDU data in the function of "dvb_ca_en50221_io_write" at source/drivers/media/dvb-core/ dvb_ca_en50221.c. The second case is for writing the host link buf size on the Command Register in the function of "dvb_ca_en50221_link_init" at source/drivers/media/dvb-core/dvb_ca_en50221.c. In the second case, there exists a bug like following. In the function of the "dvb_ca_en50221_link_init", after a TV host calculates the host link buf_size, the TV host writes the calculated host link buf_size on the Size Register. Accroding to the en50221 Spec (the page 60 of https://dvb.org/wp-content/uploads/2020/02/En50221.V1.pdf), before this writing operation, the "SW(CMDREG_SW)" flag in the Command Register should be set. We can see this setting operation in the function of the "dvb_ca_en50221_link_init" like below. ... if ((ret = ca->pub->write_cam_control(ca->pub, slot, CTRLIF_COMMAND, IRQEN | CMDREG_SW)) != 0) return ret; ... But, after that, the real writing operation is implemented using the function of the "dvb_ca_en50221_write_data" in the function of "dvb_ca_en50221_link_init", and the "dvb_ca_en50221_write_data" includes the function of "ca->pub->write_cam_control", and the function of the "ca->pub->write_cam_control" in the function of the "dvb_ca_en50221_wrte_data" does not include "CMDREG_SW" flag like below. ... if ((status = ca->pub->write_cam_control(ca->pub, slot, CTRLIF_COMMAND, IRQEN | CMDREG_HC)) != 0) ... In the above source code, we can see only the "IRQEN | CMDREG_HC", but we cannot see the "CMDREG_SW". The "CMDREG_SW" flag which was set in the function of the "dvb_ca_en50221_link_init" was rollbacked by the follwoing function of the "dvb_ca_en50221_write_data". This is a bug. and this bug causes that the calculated host link buf_size is not properly written in the CI module. Through this patch, we fix this bug. Link: https://lore.kernel.org/linux-media/20220818125027.1131-1-yongsuyoo0215@gmail.com Signed-off-by: YongSu Yoo <yongsuyoo0215@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-05-14media: netup_unidvb: fix irq init by register it at the end of probeWei Chen1-8/+9
IRQ handler netup_spi_interrupt() takes spinlock spi->lock. The lock is initialized in netup_spi_init(). However, irq handler is registered before initializing the lock. Spinlock dma->lock and i2c->lock suffer from the same problem. Fix this by registering the irq at the end of probe. Link: https://lore.kernel.org/linux-media/20230315134518.1074497-1-harperchen1110@gmail.com Signed-off-by: Wei Chen <harperchen1110@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-05-14media: dvb-usb: dw2102: fix uninit-value in su3000_read_mac_addressWei Chen1-1/+1
In su3000_read_mac_address, if i2c_transfer fails to execute two messages, array mac address will not be initialized. Without handling such error, later in function dvb_usb_adapter_dvb_init, proposed_mac is accessed before initialization. Fix this error by returning a negative value if message execution fails. Link: https://lore.kernel.org/linux-media/20230328124416.560889-1-harperchen1110@gmail.com Signed-off-by: Wei Chen <harperchen1110@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-05-14media: dvb-usb: digitv: fix null-ptr-deref in digitv_i2c_xfer()Wei Chen1-0/+4
In digitv_i2c_xfer, msg is controlled by user. When msg[i].buf is null and msg[i].len is zero, former checks on msg[i].buf would be passed. Malicious data finally reach digitv_i2c_xfer. If accessing msg[i].buf[0] without sanity check, null ptr deref would happen. We add check on msg[i].len to prevent crash. Similar commit: commit 0ed554fd769a ("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()") Link: https://lore.kernel.org/linux-media/20230313095008.1039689-1-harperchen1110@gmail.com Signed-off-by: Wei Chen <harperchen1110@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-05-14media: dvb-usb-v2: rtl28xxu: fix null-ptr-deref in rtl28xxu_i2c_xferZhang Shurong1-0/+20
In rtl28xxu_i2c_xfer, msg is controlled by user. When msg[i].buf is null and msg[i].len is zero, former checks on msg[i].buf would be passed. Malicious data finally reach rtl28xxu_i2c_xfer. If accessing msg[i].buf[0] without sanity check, null ptr deref would happen. We add check on msg[i].len to prevent crash. Similar commit: commit 0ed554fd769a ("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()") Link: https://lore.kernel.org/linux-media/tencent_3623572106754AC2F266B316798B0F6CCA05@qq.com Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-05-14media: dvb-usb-v2: ce6230: fix null-ptr-deref in ce6230_i2c_master_xfer()Wei Chen1-0/+8
In ce6230_i2c_master_xfer, msg is controlled by user. When msg[i].buf is null and msg[i].len is zero, former checks on msg[i].buf would be passed. Malicious data finally reach ce6230_i2c_master_xfer. If accessing msg[i].buf[0] without sanity check, null ptr deref would happen. We add check on msg[i].len to prevent crash. Similar commit: commit 0ed554fd769a ("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()") Link: https://lore.kernel.org/linux-media/20230313092751.209496-1-harperchen1110@gmail.com Signed-off-by: Wei Chen <harperchen1110@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-05-14media: dvb-usb-v2: ec168: fix null-ptr-deref in ec168_i2c_xfer()Wei Chen1-0/+12
In ec168_i2c_xfer, msg is controlled by user. When msg[i].buf is null and msg[i].len is zero, former checks on msg[i].buf would be passed. If accessing msg[i].buf[0] without sanity check, null pointer deref would happen. We add check on msg[i].len to prevent crash. Similar commit: commit 0ed554fd769a ("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()") Link: https://lore.kernel.org/linux-media/20230313085853.3252349-1-harperchen1110@gmail.com Signed-off-by: Wei Chen <harperchen1110@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-05-14media: dvb-usb: az6027: fix three null-ptr-deref in az6027_i2c_xfer()Wei Chen1-0/+12
In az6027_i2c_xfer, msg is controlled by user. When msg[i].buf is null, commit 0ed554fd769a ("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()") fix the null-ptr-deref bug when msg[i].addr is 0x99. However, null-ptr-deref also happens when msg[i].addr is 0xd0 and 0xc0. We add check on msg[i].len to prevent null-ptr-deref. Link: https://lore.kernel.org/linux-media/20230310165604.3093483-1-harperchen1110@gmail.com Signed-off-by: Wei Chen <harperchen1110@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-01 18:36:08 +0300