| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Currently in cdc_ncm_check_tx_max(), if dwNtbOutMaxSize is lower than
the calculated "min" value, but greater than zero, the logic sets
tx_max to dwNtbOutMaxSize. This is then used to allocate a new SKB in
cdc_ncm_fill_tx_frame() where all the data is handled.
For small values of dwNtbOutMaxSize the memory allocated during
alloc_skb(dwNtbOutMaxSize, GFP_ATOMIC) will have the same size, due to
how size is aligned at alloc time:
size = SKB_DATA_ALIGN(size);
size += SKB_DATA_ALIGN(sizeof(struct skb_shared_info));
Thus we hit the same bug that we tried to squash with
commit 2be6d4d16a084 ("net: cdc_ncm: Allow for dwNtbOutMaxSize to be unset or zero")
Low values of dwNtbOutMaxSize do not cause an issue presently because at
alloc_skb() time more memory (512b) is allocated than required for the
SKB headers alone (320b), leaving some space (512b - 320b = 192b)
for CDC data (172b).
However, if more elements (for example 3 x u64 = [24b]) were added to
one of the SKB header structs, say 'struct skb_shared_info',
increasing its original size (320b [320b aligned]) to something larger
(344b [384b aligned]), then suddenly the CDC data (172b) no longer
fits in the spare SKB data area (512b - 384b = 128b).
Consequently the SKB bounds checking semantics fails and panics:
skbuff: skb_over_panic: text:ffffffff831f755b len:184 put:172 head:ffff88811f1c6c00 data:ffff88811f1c6c00 tail:0xb8 end:0x80 dev:<NULL>
------------[ cut here ]------------
kernel BUG at net/core/skbuff.c:113!
invalid opcode: 0000 [#1] PREEMPT SMP KASAN
CPU: 0 PID: 57 Comm: kworker/0:2 Not tainted 5.15.106-syzkaller-00249-g19c0ed55a470 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/14/2023
Workqueue: mld mld_ifc_work
RIP: 0010:skb_panic net/core/skbuff.c:113 [inline]
RIP: 0010:skb_over_panic+0x14c/0x150 net/core/skbuff.c:118
[snip]
Call Trace:
<TASK>
skb_put+0x151/0x210 net/core/skbuff.c:2047
skb_put_zero include/linux/skbuff.h:2422 [inline]
cdc_ncm_ndp16 drivers/net/usb/cdc_ncm.c:1131 [inline]
cdc_ncm_fill_tx_frame+0x11ab/0x3da0 drivers/net/usb/cdc_ncm.c:1308
cdc_ncm_tx_fixup+0xa3/0x100
Deal with too low values of dwNtbOutMaxSize, clamp it in the range
[USB_CDC_NCM_NTB_MIN_OUT_SIZE, CDC_NCM_NTB_MAX_SIZE_TX]. We ensure
enough data space is allocated to handle CDC data by making sure
dwNtbOutMaxSize is not smaller than USB_CDC_NCM_NTB_MIN_OUT_SIZE.
Fixes: 289507d3364f ("net: cdc_ncm: use sysfs for rx/tx aggregation tuning")
Cc: stable@vger.kernel.org
Reported-by: syzbot+9f575a1f15fc0c01ed69@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=b982f1059506db48409d
Link: https://lore.kernel.org/all/20211202143437.1411410-1-lee.jones@linaro.org/
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230517133808.1873695-2-tudor.ambarus@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull NVMe fixes from Keith:
"nvme fixes for Linux 6.4
- More device quirks (Sagi, Hristo, Adrian, Daniel)
- Controller delete race (Maurizo)
- Multipath cleanup fix (Christoph)"
* tag 'nvme-6.4-2023-05-18' of git://git.infradead.org/nvme:
nvme-pci: Add quirk for Teamgroup MP33 SSD
nvme: do not let the user delete a ctrl before a complete initialization
nvme-multipath: don't call blk_mark_disk_dead in nvme_mpath_remove_disk
nvme-pci: clamp max_hw_sectors based on DMA optimized limitation
nvme-pci: add quirk for missing secondary temperature thresholds
nvme-pci: add NVME_QUIRK_BOGUS_NID for HS-SSD-FUTURE 2048G
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.4-2023-05-18:
amdgpu:
- update gfx11 clock counter logic
- Fix a race when disabling gfxoff on gfx10/11 for profiling
- Raven/Raven2/PCO clock counter fix
- Add missing get_vbios_fb_size for GMC 11
- Fix a spurious irq warning in the device remove case
- Fix possible power mode mismatch between driver and PMFW
- USB4 fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230518174811.3841-1-alexander.deucher@amd.com
|
|
https://gitlab.freedesktop.org/drm/msm into drm-fixes
msm-fixes for v6.4-rc3
Display Fixes:
+ Catalog fixes:
- fix the programmable fetch lines and qos settings of msm8998
to match what is present downstream
- fix the LM pairs for msm8998 to match what is present downstream.
The current settings are not right as LMs with incompatible
connected blocks are paired
- remove unused INTF0 interrupt mask from SM6115/QCM2290 as there
is no INTF0 present on those chipsets. There is only one DSI on
index 1
- remove TE2 block from relevant chipsets because this is mainly
used for ping-pong split feature which is not supported upstream
and also for the chipsets where we are removing them in this
change, that block is not present as the tear check has been moved
to the intf block
- relocate non-MDP_TOP INTF_INTR offsets from dpu_hwio.h to
dpu_hw_interrupts.c to match where they belong
- fix the indentation for REV_7xxx interrupt masks
- fix the offset and version for dither blocks of SM8[34]50/SC8280XP
chipsets as it was incorrect
- make the ping-pong blk length 0 for appropriate chipsets as those
chipsets only have a dither ping-pong dither block but no other
functionality in the base ping-pong
- remove some duplicate register defines from INTF
+ Fix the log mask for the writeback block so that it can be enabled
correctly via debugfs
+ unregister the hdmi codec for dp during unbind otherwise it leaks
audio codec devices
+ Yaml change to fix warnings related to 'qcom,master-dsi' and
'qcom,sync-dual-dsi'
GPU Fixes:
+ fix submit error path leak
+ arm-smmu-qcom fix for regression that broke per-process page tables
+ fix no-iommu crash
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGvHEcJfp=k6qatmb_SvAeyvy3CBpaPfwLqtNthuEzA_7w@mail.gmail.com
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
Add missing null check for HDCP code.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZGUgi7kXq+MiLcCA@jlahtine-mobl.ger.corp.intel.com
|
|
Add a quirk for Teamgroup MP33 that reports duplicate ids for disk.
Signed-off-by: Daniel Smith <dansmith@ds.gy>
[kch: patch formatting]
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Tested-by: Daniel Smith <dansmith@ds.gy>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes
Just one fixup to exynos_drm_g2d module.
- Fix below build warning by marking them as 'static inline'
drivers/gpu/drm/exynos/exynos_drm_g2d.h:37:5: error: no previous prototype for 'g2d_open'
drivers/gpu/drm/exynos/exynos_drm_g2d.h:42:5: error: no previous prototype for 'g2d_close'
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230515083943.43933-1-inki.dae@samsung.com
|
|
Move cxl_await_media_ready() to cxl_pci probe before driver starts issuing
IDENTIFY and retrieving memory device information to ensure that the
device is ready to provide the information. Allow cxl_pci_probe() to succeed
even if media is not ready. Cache the media failure in cxlds and don't ask
the device for any media information.
The rationale for proceeding in the !media_ready case is to allow for
mailbox operations to interrogate and/or remediate the device. After
media is repaired then rebinding the cxl_pci driver is expected to
restart the capacity scan.
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Fixes: b39cb1052a5c ("cxl/mem: Register CXL memX devices")
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/168445310026.3251520.8124296540679268206.stgit@djiang5-mobl3
[djbw: fixup cxl_test]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
The Memory_Info_Valid bit (CXL 3.0 8.1.3.8.2) indicates that the CXL
Range Size High and Size Low registers are valid. The bit must be set
within 1 second of reset deassertion to the device. Check valid bit
before we check the Memory_Active bit when waiting for
cxl_await_media_ready() to ensure that the memory info is valid for
consumption. Also ensures both DVSEC ranges 1 and 2 are ready if DVSEC
Capability indicates they are both supported.
Fixes: 523e594d9cc0 ("cxl/pci: Implement wait for media active")
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/168444687469.3134781.11033518965387297327.stgit@djiang5-mobl3
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Derick noticed, when testing hot plug, that hot-add behaves nominally
after a removal. However, if the hot-add is done without a prior
removal, CXL.mem accesses fail. It turns out that the original
implementation of the port driver and region programming wrongly assumed
that platform-firmware always enables the host-bridge HDM decoder
capability. Add support turning on switch-level HDM decoders in the case
where platform-firmware has not.
The implementation is careful to only arrange for the enable to be
undone if the current instance of the driver was the one that did the
enable. This is to interoperate with platform-firmware that may expect
CXL.mem to remain active after the driver is shutdown. This comes at the
cost of potentially not shutting down the enable on kexec flows, but it
is mitigated by the fact that the related HDM decoders still need to be
enabled on an individual basis.
Cc: <stable@vger.kernel.org>
Reported-by: Derick Marks <derick.w.marks@intel.com>
Fixes: 54cdbf845cf7 ("cxl/port: Add a driver for 'struct cxl_port' objects")
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/168437998331.403037.15719879757678389217.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from can, xfrm, bluetooth and netfilter.
Current release - regressions:
- ipv6: fix RCU splat in ipv6_route_seq_show()
- wifi: iwlwifi: disable RFI feature
Previous releases - regressions:
- tcp: fix possible sk_priority leak in tcp_v4_send_reset()
- tipc: do not update mtu if msg_max is too small in mtu negotiation
- netfilter: fix null deref on element insertion
- devlink: change per-devlink netdev notifier to static one
- phylink: fix ksettings_set() ethtool call
- wifi: mac80211: fortify the spinlock against deadlock by interrupt
- wifi: brcmfmac: check for probe() id argument being NULL
- eth: ice:
- fix undersized tx_flags variable
- fix ice VF reset during iavf initialization
- eth: hns3: fix sending pfc frames after reset issue
Previous releases - always broken:
- xfrm: release all offloaded policy memory
- nsh: use correct mac_offset to unwind gso skb in nsh_gso_segment()
- vsock: avoid to close connected socket after the timeout
- dsa: rzn1-a5psw: enable management frames for CPU port
- eth: virtio_net: fix error unwinding of XDP initialization
- eth: tun: fix memory leak for detached NAPI queue.
Misc:
- MAINTAINERS: sctp: move Neil to CREDITS"
* tag 'net-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (107 commits)
MAINTAINERS: skip CCing netdev for Bluetooth patches
mdio_bus: unhide mdio_bus_init prototype
bridge: always declare tunnel functions
atm: hide unused procfs functions
net: isa: include net/Space.h
Revert "ARM: dts: stm32: add CAN support on stm32f746"
netfilter: nft_set_rbtree: fix null deref on element insertion
netfilter: nf_tables: fix nft_trans type confusion
netfilter: conntrack: define variables exp_nat_nla_policy and any_addr with CONFIG_NF_NAT
net: wwan: t7xx: Ensure init is completed before system sleep
net: selftests: Fix optstring
net: pcs: xpcs: fix C73 AN not getting enabled
net: wwan: iosm: fix NULL pointer dereference when removing device
vlan: fix a potential uninit-value in vlan_dev_hard_start_xmit()
mailmap: add entries for Nikolay Aleksandrov
igb: fix bit_shift to be in [1..8] range
net: dsa: mv88e6xxx: Fix mv88e6393x EPC write command offset
cassini: Fix a memory leak in the error handling path of cas_init_one()
tun: Fix memory leak for detached NAPI queue.
can: kvaser_pciefd: Disable interrupts in probe error path
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
"Several fixes for the dvb core and drivers:
- fix UAF and null pointer de-reference in DVB core
- fix kernel runtime warning for blocking operation in wait_event*()
in dvb core
- fix write size bug in DVB conditional access core
- fix dvb demux continuity counter debug check logic
- randconfig build fixes in pvrusb2 and mn88443x
- fix memory leak in ttusb-dec
- fix netup_unidvb probe-time error check logic
- improve error handling in dw2102 if it can't retrieve DVB MAC
address"
* tag 'media/v6.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: dvb-core: Fix use-after-free due to race condition at dvb_ca_en50221
media: dvb-core: Fix kernel WARNING for blocking operation in wait_event*()
media: dvb-core: Fix use-after-free due to race at dvb_register_device()
media: dvb-core: Fix use-after-free due on race condition at dvb_net
media: dvb-core: Fix use-after-free on race condition at dvb_frontend
media: mn88443x: fix !CONFIG_OF error by drop of_match_ptr from ID table
media: ttusb-dec: fix memory leak in ttusb_dec_exit_dvb()
media: dvb_ca_en50221: fix a size write bug
media: netup_unidvb: fix irq init by register it at the end of probe
media: dvb-usb: dw2102: fix uninit-value in su3000_read_mac_address
media: dvb-usb: digitv: fix null-ptr-deref in digitv_i2c_xfer()
media: dvb-usb-v2: rtl28xxu: fix null-ptr-deref in rtl28xxu_i2c_xfer
media: dvb-usb-v2: ce6230: fix null-ptr-deref in ce6230_i2c_master_xfer()
media: dvb-usb-v2: ec168: fix null-ptr-deref in ec168_i2c_xfer()
media: dvb-usb: az6027: fix three null-ptr-deref in az6027_i2c_xfer()
media: netup_unidvb: fix use-after-free at del_timer()
media: dvb_demux: fix a bug for the continuity counter
media: pvrusb2: fix DVB_CORE dependency
|
|
When handling UBLK_IO_FETCH_REQ, ctx->uring_lock is grabbed first, then
ub->mutex is acquired.
When handling UBLK_CMD_STOP_DEV or UBLK_CMD_DEL_DEV, ub->mutex is
grabbed first, then calling io_uring_cmd_done() for canceling uring
command, in which ctx->uring_lock may be required.
Real deadlock only happens when all the above commands are issued from
same uring context, and in reality different uring contexts are often used
for handing control command and IO command.
Fix the issue by using io_uring_cmd_complete_in_task() to cancel command
in ublk_cancel_dev(ublk_cancel_queue).
Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Closes: https://lore.kernel.org/linux-block/becol2g7sawl4rsjq2dztsbc7mqypfqko6wzsyoyazqydoasml@rcxarzwidrhk
Cc: Ziyang Zhang <ZiyangZhang@linux.alibaba.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Link: https://lore.kernel.org/r/20230517133408.210944-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Use dpia_validate_usb4_bw() function
Fixes: a8b537605e22 ("drm/amd/display: Add function pointer for validate bw usb4")
Reviewed-by: Roman Li <roman.li@amd.com>
Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Mustapha Ghaddar <mghaddar@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
PMFW may boots the ASIC with a different power mode from the system's
real one. Notify PMFW explicitly the power mode the system in. This
is needed only when ACDC switch via gpio is not supported.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
When performing device unbind or halt, we have disabled all irqs at the
very begining like amdgpu_pci_remove or amdgpu_device_halt. So
amdgpu_irq_put for irqs stored in fence driver should not be called
any more, otherwise, below calltrace will arrive.
[ 139.114088] WARNING: CPU: 2 PID: 1550 at drivers/gpu/drm/amd/amdgpu/amdgpu_irq.c:616 amdgpu_irq_put+0xf6/0x110 [amdgpu]
[ 139.114655] Call Trace:
[ 139.114655] <TASK>
[ 139.114657] amdgpu_fence_driver_hw_fini+0x93/0x130 [amdgpu]
[ 139.114836] amdgpu_device_fini_hw+0xb6/0x350 [amdgpu]
[ 139.114955] amdgpu_driver_unload_kms+0x51/0x70 [amdgpu]
[ 139.115075] amdgpu_pci_remove+0x63/0x160 [amdgpu]
[ 139.115193] ? __pm_runtime_resume+0x64/0x90
[ 139.115195] pci_device_remove+0x3a/0xb0
[ 139.115197] device_remove+0x43/0x70
[ 139.115198] device_release_driver_internal+0xbd/0x140
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Implement get_vbios_fb_size() so we can properly reserve
the vbios splash screen to avoid potential artifacts on the
screen during the transition from the pre-OS console to the
OS console.
Acked-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
|
|
revision id
Due to the raven2 and raven/picasso maybe have the same GC_HWIP version.
So differentiate them by revision id.
Signed-off-by: shanshengwang <shansheng.wang@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
(Bas: speculative change to mirror gfx10/gfx9)
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
|
|
Otherwise we get a full system lock (looks like a FW mess).
Copied the order from the GFX9 powergating code.
Fixes: 366468ff6c34 ("drm/amdgpu: Allow GfxOff on Vangogh as default")
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2545
Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Tested-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Add hardware version read check for PMIC MT6359
Signed-off-by: Sen Chu <sen.chu@mediatek.com
Fixes: 4cfc96547512 ("regulator: mt6359: Add support for MT6359P regulator")
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com
Link: https://lore.kernel.org/r/20230518040646.8730-1-sen.chu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2023-05-18
this is a pull request of 7 patches for net/master.
The first 6 patches are by Jimmy Assarsson and fix several bugs in the
kvaser_pciefd driver.
The latest patch is from me and reverts a change in stm32f746.dtsi
that causes build errors due to a missing dependent patch.
* tag 'linux-can-fixes-for-6.4-20230518' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
Revert "ARM: dts: stm32: add CAN support on stm32f746"
can: kvaser_pciefd: Disable interrupts in probe error path
can: kvaser_pciefd: Do not send EFLUSH command on TFD interrupt
can: kvaser_pciefd: Empty SRB buffer in probe
can: kvaser_pciefd: Call request_irq() before enabling interrupts
can: kvaser_pciefd: Clear listen-only bit if not explicitly requested
can: kvaser_pciefd: Set CAN_STATE_STOPPED in kvaser_pciefd_stop()
====================
Link: https://lore.kernel.org/r/20230518073241.1110453-1-mkl@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Linux 6.4-rc2
* tag 'v6.4-rc2': (162 commits)
Linux 6.4-rc2
parisc: Fix encoding of swp_entry due to added SWP_EXCLUSIVE flag
ext4: bail out of ext4_xattr_ibody_get() fails for any reason
ext4: add bounds checking in get_max_inline_xattr_value_size()
ext4: add indication of ro vs r/w mounts in the mount message
ext4: fix deadlock when converting an inline directory in nojournal mode
ext4: improve error recovery code paths in __ext4_remount()
ext4: improve error handling from ext4_dirhash()
ext4: don't clear SB_RDONLY when remounting r/w until quota is re-enabled
ext4: check iomap type only if ext4_iomap_begin() does not fail
ext4: avoid a potential slab-out-of-bounds in ext4_group_desc_csum
ext4: fix data races when using cached status extents
ext4: avoid deadlock in fs reclaim with page writeback
ext4: fix invalid free tracking in ext4_xattr_move_to_block()
ext4: remove a BUG_ON in ext4_mb_release_group_pa()
ext4: allow ext4_get_group_info() to fail
cxl: Add missing return to cdat read error path
tools/testing/cxl: Use DEFINE_STATIC_SRCU()
x86/retbleed: Fix return thunk alignment
Documentation/block: drop the request.rst file
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Kalle Valo says:
====================
wireless fixes for v6.4
A lot of fixes this time, for both the stack and the drivers. The
brcmfmac resume fix has been reported by several people so I would say
it's the most important here. The iwlwifi RFI workaround is also
something which was reported as a regression recently.
* tag 'wireless-2023-05-17' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: (31 commits)
wifi: b43: fix incorrect __packed annotation
wifi: rtw88: sdio: Always use two consecutive bytes for word operations
mac80211_hwsim: fix memory leak in hwsim_new_radio_nl
wifi: iwlwifi: mvm: Add locking to the rate read flow
wifi: iwlwifi: Don't use valid_links to iterate sta links
wifi: iwlwifi: mvm: don't trust firmware n_channels
wifi: iwlwifi: mvm: fix OEM's name in the tas approved list
wifi: iwlwifi: fix OEM's name in the ppag approved list
wifi: iwlwifi: mvm: fix initialization of a return value
wifi: iwlwifi: mvm: fix access to fw_id_to_mac_id
wifi: iwlwifi: fw: fix DBGI dump
wifi: iwlwifi: mvm: fix number of concurrent link checks
wifi: iwlwifi: mvm: fix cancel_delayed_work_sync() deadlock
wifi: iwlwifi: mvm: don't double-init spinlock
wifi: iwlwifi: mvm: always free dup_data
wifi: mac80211: recalc chanctx mindef before assigning
wifi: mac80211: consider reserved chanctx for mindef
wifi: mac80211: simplify chanctx allocation
wifi: mac80211: Abort running color change when stopping the AP
wifi: mac80211: fix min center freq offset tracing
...
====================
Link: https://lore.kernel.org/r/20230517151914.B0AF6C433EF@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The legacy drivers that still get called from net/Space.c have prototypes
in net/Space, but this header is not included in most of the files that
define those functions:
drivers/net/ethernet/cirrus/cs89x0.c:1649:28: error: no previous prototype for 'cs89x0_probe' [-Werror=missing-prototypes]
drivers/net/ethernet/8390/ne.c:947:28: error: no previous prototype for 'ne_probe' [-Werror=missing-prototypes]
drivers/net/ethernet/8390/smc-ultra.c:167:28: error: no previous prototype for 'ultra_probe' [-Werror=missing-prototypes]
drivers/net/ethernet/amd/lance.c:438:28: error: no previous prototype for 'lance_probe' [-Werror=missing-prototypes]
drivers/net/ethernet/3com/3c515.c:422:20: error: no previous prototype for 'tc515_probe' [-Werror=missing-prototypes]
Add the inclusion to avoids the warnings.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230516194625.549249-1-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, when regmap_raw_write() splits the data, it uses the
max_raw_write value defined for the bus. For any bus that includes
the target register address in the max_raw_write value, the chunked
transmission will always exceed the maximum transmission length.
To avoid this problem, subtract the length of the register and the
padding from the maximum transmission.
Signed-off-by: Jim Wylder <jwylder@google.com
Link: https://lore.kernel.org/r/20230517152444.3690870-2-jwylder@google.com
Signed-off-by: Mark Brown <broonie@kernel.org
|
|
Long message loopback slice is used for achieving traffic balance between
QPs. It prevents the problem that QPs with large traffic occupying the
hardware pipeline for a long time and QPs with small traffic cannot be
scheduled.
Currently, its maximum value is set to 16K, which means only after a QP
sends 16K will the second QP be scheduled. This value is too large, which
will lead to unbalanced traffic scheduling, and thus it needs to be
modified.
The setting range of the long message loopback slice is modified to be
from 1024 (the lower limit supported by hardware) to mtu. Actual testing
shows that this value can significantly reduce error in hardware traffic
scheduling.
This solution is compatible with both HIP08 and HIP09. The modified
lp_pktn_ini has a maximum value of 2 (when mtu is 256), so the range
checking code for lp_pktn_ini is no longer necessary and needs to be
deleted.
Fixes: 0e60778efb07 ("RDMA/hns: Modify the value of MAX_LP_MSG_LEN to meet hardware compatibility")
Link: https://lore.kernel.org/r/20230512092245.344442-4-huangjunxian6@hisilicon.com
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
For hns, the specification of an entry like resource (E.g. WQE/CQE/EQE)
depends on BT page size, buf page size and hopnum. For user mode, the buf
page size depends on UMEM. Therefore, the actual specification is
controlled by BT page size and hopnum.
The current BT page size and hopnum are obtained from firmware. This makes
the driver inflexible and introduces unnecessary constraints. Resource
allocation failures occur in many scenarios.
This patch will calculate whether the BT page size set by firmware is
sufficient before allocating BT, and increase the BT page size if it is
insufficient.
Fixes: 1133401412a9 ("RDMA/hns: Optimize base address table config flow for qp buffer")
Link: https://lore.kernel.org/r/20230512092245.344442-3-huangjunxian6@hisilicon.com
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
On HIP08, the queried timeout attr is different from the timeout attr
configured by the user.
It is found by rdma-core testcase test_rdmacm_async_traffic:
======================================================================
FAIL: test_rdmacm_async_traffic (tests.test_rdmacm.CMTestCase)
----------------------------------------------------------------------
Traceback (most recent call last):
File "./tests/test_rdmacm.py", line 33, in test_rdmacm_async_traffic
self.two_nodes_rdmacm_traffic(CMAsyncConnection, self.rdmacm_traffic,
File "./tests/base.py", line 382, in two_nodes_rdmacm_traffic
raise(res)
AssertionError
Fixes: 926a01dc000d ("RDMA/hns: Add QP operations support for hip08 SoC")
Link: https://lore.kernel.org/r/20230512092245.344442-2-huangjunxian6@hisilicon.com
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
This code was written prior to previous updates to this
logic for other chips. The RSC registers are part of
SMUIO which is an always on block so there is no need
to disable gfxoff. Additionally add the carryover and
preemption checks.
v2: rebase
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.y: 5591a051b86b: drm/amdgpu: refine get gpu clock counter method
Cc: stable@vger.kernel.org # 6.2.y: 5591a051b86b: drm/amdgpu: refine get gpu clock counter method
Cc: stable@vger.kernel.org # 6.3.y: 5591a051b86b: drm/amdgpu: refine get gpu clock counter method
|
|
Otherwise it is not always obvious if a dt or iommu change is causing us
to fall back to global pgtable.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/537359/
Link: https://lore.kernel.org/r/20230516222039.907690-2-robdclark@gmail.com
|
|
When the special handling of qcom,adreno-smmu was moved into
qcom_smmu_create(), it was overlooked that we didn't have all the
required entries in qcom_smmu_impl_of_match. So we stopped getting
adreno_smmu_priv on sc7180, breaking per-process pgtables.
Fixes: 30b912a03d91 ("iommu/arm-smmu-qcom: Move the qcom,adreno-smmu check into qcom_smmu_create")
Cc: <stable@vger.kernel.org>
Suggested-by: Lepton Wu <lepton@chromium.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/537357/
Link: https://lore.kernel.org/r/20230516222039.907690-1-robdclark@gmail.com
|
|
If a userspace application performes a "delete_controller" command
early during the ctrl initialization, the delete operation
may race against the init code and the kernel will crash.
nvme nvme5: Connect command failed: host path error
nvme nvme5: failed to connect queue: 0 ret=880
PF: supervisor write access in kernel mode
PF: error_code(0x0002) - not-present page
blk_mq_quiesce_queue+0x18/0x90
nvme_tcp_delete_ctrl+0x24/0x40 [nvme_tcp]
nvme_do_delete_ctrl+0x7f/0x8b [nvme_core]
nvme_sysfs_delete.cold+0x8/0xd [nvme_core]
kernfs_fop_write_iter+0x124/0x1b0
new_sync_write+0xff/0x190
vfs_write+0x1ef/0x280
Fix the crash by checking the NVME_CTRL_STARTED_ONCE bit;
if it's not set it means that the nvme controller is still
in the process of getting initialized and the kernel
will return an -EBUSY error to userspace.
Set the NVME_CTRL_STARTED_ONCE later in the nvme_start_ctrl()
function, after the controller start operation is completed.
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
nvme_mpath_remove_disk is called after del_gendisk, at which point a
blk_mark_disk_dead call doesn't make any sense.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
These don't do anything anymore, the only user of the symbol was
VFIO_CCW/AP which already "depends on VFIO" and VFIO itself selects
IOMMU_API.
When this was added VFIO was wrongly doing "depends on IOMMU_API" which
required some contortions like this to ensure IOMMU_API was turned on.
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/0-v2-eb322ce2e547+188f-rm_iommu_ccw_jgg@nvidia.com
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Use "a" constraint instead of "d" constraint to pass the state parameter to
the do_sqbs() inline assembly. This prevents that general purpose register
zero is used for the state parameter.
If the compiler would select general purpose register zero this would be
problematic for the used instruction in rsy format: the register used for
the state parameter is a base register. If the base register is general
purpose register zero the contents of the register are unexpectedly ignored
when the instruction is executed.
This only applies to z/VM guests using QIOASSIST with dedicated (pass through)
QDIO-based devices such as FCP [zfcp driver] as well as real OSA or
HiperSockets [qeth driver].
A possible symptom for this case using zfcp is the following repeating kernel
message pattern:
zfcp <devbusid>: A QDIO problem occurred
zfcp <devbusid>: A QDIO problem occurred
zfcp <devbusid>: qdio: ZFCP on SC <sc> using AI:1 QEBSM:1 PRI:1 TDD:1 SIGA: W
zfcp <devbusid>: A QDIO problem occurred
zfcp <devbusid>: A QDIO problem occurred
Each of the qdio problem message can be accompanied by the following entries
for the affected subchannel <sc> in
/sys/kernel/debug/s390dbf/qdio_error/hex_ascii for zfcp or qeth:
<sc> ccq: 69....
<sc> SQBS ERROR.
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Cc: Steffen Maier <maier@linux.ibm.com>
Fixes: 8129ee164267 ("[PATCH] s390: qdio V=V pass-through")
Cc: <stable@vger.kernel.org>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-linus
Mika writes:
thunderbolt: Fix for v6.4-rc3
This includes a single fix that fixes an error when resuming from
hibernation if the driver is built into the kernel. This has been in
linux-next with no reported issues.
* tag 'thunderbolt-for-v6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt:
thunderbolt: Clear registers properly when auto clear isn't in use
|
|
When the system attempts to sleep while mtk_t7xx is not ready, the driver
cannot put the device to sleep:
[ 12.472918] mtk_t7xx 0000:57:00.0: [PM] Exiting suspend, modem in invalid state
[ 12.472936] mtk_t7xx 0000:57:00.0: PM: pci_pm_suspend(): t7xx_pci_pm_suspend+0x0/0x20 [mtk_t7xx] returns -14
[ 12.473678] mtk_t7xx 0000:57:00.0: PM: dpm_run_callback(): pci_pm_suspend+0x0/0x1b0 returns -14
[ 12.473711] mtk_t7xx 0000:57:00.0: PM: failed to suspend async: error -14
[ 12.764776] PM: Some devices failed to suspend, or early wake event detected
Mediatek confirmed the device can take a rather long time to complete
its initialization, so wait for up to 20 seconds until init is done.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The XPCS expects clause 73 (copper backplane) autoneg to follow the
ethtool autoneg bit. It actually did that until the blamed
commit inaptly replaced state->an_enabled (coming from ethtool) with
phylink_autoneg_inband() (coming from the device tree or struct
phylink_config), as part of an unrelated phylink_pcs API conversion.
Russell King suggests that state->an_enabled from the original code was
just a proxy for the ethtool Autoneg bit, and that the correct way of
restoring the functionality is to check for this bit in the advertising
mask.
Fixes: 11059740e616 ("net: pcs: xpcs: convert to phylink_pcs_ops")
Link: https://lore.kernel.org/netdev/ZGNt2MFeRolKGFck@shell.armlinux.org.uk/
Suggested-by: Russell King (Oracle) <linux@armlinux.org.uk>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In suspend and resume cycle, the removal and rescan of device ends
up in NULL pointer dereference.
During driver initialization, if the ipc_imem_wwan_channel_init()
fails to get the valid device capabilities it returns an error and
further no resource (wwan struct) will be allocated. Now in this
situation if driver removal procedure is initiated it would result
in NULL pointer exception since unallocated wwan struct is dereferenced
inside ipc_wwan_deinit().
ipc_imem_run_state_worker() to handle the called functions return value
and to release the resource in failure case. It also reports the link
down event in failure cases. The user space application can handle this
event to do a device reset for restoring the device communication.
Fixes: 3670970dd8c6 ("net: iosm: shared memory IPC interface")
Reported-by: Samuel Wein PhD <sam@samwein.com>
Closes: https://lore.kernel.org/netdev/20230427140819.1310f4bd@kernel.org/T/
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If static allocation and dynamic allocation GPIOs are present,
dynamic allocation pollutes the numberspace for static allocation,
causing static allocation to fail.
Enforce dynamic allocation above GPIO_DYNAMIC_BASE.
Seen on a GTA04 when omap-gpio (static) and twl-gpio (dynamic)
raced:
[some successful registrations of omap_gpio instances]
[ 2.553833] twl4030_gpio twl4030-gpio: gpio (irq 145) chaining IRQs 161..178
[ 2.561401] gpiochip_find_base: found new base at 160
[ 2.564392] gpio gpiochip5: (twl4030): added GPIO chardev (254:5)
[ 2.564544] gpio gpiochip5: registered GPIOs 160 to 177 on twl4030
[...]
[ 2.692169] omap-gpmc 6e000000.gpmc: GPMC revision 5.0
[ 2.697357] gpmc_mem_init: disabling cs 0 mapped at 0x0-0x1000000
[ 2.703643] gpiochip_find_base: found new base at 178
[ 2.704376] gpio gpiochip6: (omap-gpmc): added GPIO chardev (254:6)
[ 2.704589] gpio gpiochip6: registered GPIOs 178 to 181 on omap-gpmc
[...]
[ 2.840393] gpio gpiochip7: Static allocation of GPIO base is deprecated, use dynamic allocation.
[ 2.849365] gpio gpiochip7: (gpio-160-191): GPIO integer space overlap, cannot add chip
[ 2.857513] gpiochip_add_data_with_key: GPIOs 160..191 (gpio-160-191) failed to register, -16
[ 2.866149] omap_gpio 48310000.gpio: error -EBUSY: Could not register gpio chip
On that device it is fixed invasively by
commit 92bf78b33b0b4 ("gpio: omap: use dynamic allocation of base")
but let's also fix that for devices where there is still
a mixture of static and dynamic allocation.
Fixes: 7b61212f2a07 ("gpiolib: Get rid of ARCH_NR_GPIOS")
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Reviewed-by: <christophe.leroy@csgroup.eu>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
It turned out that Aya Neo Air Plus had a different board name than
expected.
This patch changes Aya Neo Air's quirk to account for that, as both
devices share "Air" in DMI product name.
Tested on Air claiming to be an Air Pro, and on Air Plus.
Signed-off-by: Maya Matuszczyk <maccraft123mc@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230515184843.1552612-1-maccraft123mc@gmail.com
|
|
This driver's debugfs files have had a read operation since commit
2a9e27408e12 ("gpio: mockup: rework debugfs interface"), but were
still being created with write-only mode bits. Update them to
indicate that the files can also be read.
Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Fixes: 2a9e27408e12 ("gpio: mockup: rework debugfs interface")
Cc: stable@kernel.org # v5.1+
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
In igb_hash_mc_addr() the expression:
"mc_addr[4] >> 8 - bit_shift", right shifting "mc_addr[4]"
shift by more than 7 bits always yields zero, so hash becomes not so different.
Add initialization with bit_shift = 1 and add a loop condition to ensure
bit_shift will be always in [1..8] range.
Fixes: 9d5c824399de ("igb: PCI-Express 82575 Gigabit Ethernet driver")
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony nguyen says:
====================
Intel Wired LAN Driver Updates 2023-05-16
This series contains updates to ice and iavf drivers.
Ahmed adds setting of missed condition for statistics which caused
incorrect reporting of values for ice. For iavf, he removes a call to set
VLAN offloads during re-initialization which can cause incorrect values
to be set.
Dawid adds checks to ensure VF is ready to be reset before executing
commands that will require it to be reset on ice.
---
v2:
Patch 2
- Redo commit message
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
According to datasheet, the command opcode must be specified
into bits [14:12] of the Extended Port Control register (EPC).
Fixes: de776d0d316f ("net: dsa: mv88e6xxx: add support for mv88e6393x family")
Signed-off-by: Marco Migliore <m.migliore@tiesse.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
cas_saturn_firmware_init() allocates some memory using vmalloc(). This
memory is freed in the .remove() function but not it the error handling
path of the probe.
Add the missing vfree() to avoid a memory leak, should an error occur.
Fixes: fcaa40669cd7 ("cassini: use request_firmware")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
syzkaller reported [0] memory leaks of sk and skb related to the TUN
device with no repro, but we can reproduce it easily with:
struct ifreq ifr = {}
int fd_tun, fd_tmp;
char buf[4] = {};
fd_tun = openat(AT_FDCWD, "/dev/net/tun", O_WRONLY, 0);
ifr.ifr_flags = IFF_TUN | IFF_NAPI | IFF_MULTI_QUEUE;
ioctl(fd_tun, TUNSETIFF, &ifr);
ifr.ifr_flags = IFF_DETACH_QUEUE;
ioctl(fd_tun, TUNSETQUEUE, &ifr);
fd_tmp = socket(AF_PACKET, SOCK_PACKET, 0);
ifr.ifr_flags = IFF_UP;
ioctl(fd_tmp, SIOCSIFFLAGS, &ifr);
write(fd_tun, buf, sizeof(buf));
close(fd_tun);
If we enable NAPI and multi-queue on a TUN device, we can put skb into
tfile->sk.sk_write_queue after the queue is detached. We should prevent
it by checking tfile->detached before queuing skb.
Note this must be done under tfile->sk.sk_write_queue.lock because write()
and ioctl(IFF_DETACH_QUEUE) can run concurrently. Otherwise, there would
be a small race window:
write() ioctl(IFF_DETACH_QUEUE)
`- tun_get_user `- __tun_detach
|- if (tfile->detached) |- tun_disable_queue
| `-> false | `- tfile->detached = tun
| `- tun_queue_purge
|- spin_lock_bh(&queue->lock)
`- __skb_queue_tail(queue, skb)
Another solution is to call tun_queue_purge() when closing and
reattaching the detached queue, but it could paper over another
problems. Also, we do the same kind of test for IFF_NAPI_FRAGS.
[0]:
unreferenced object 0xffff88801edbc800 (size 2048):
comm "syz-executor.1", pid 33269, jiffies 4295743834 (age 18.756s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 07 40 00 00 00 00 00 00 00 00 00 00 00 00 ...@............
backtrace:
[<000000008c16ea3d>] __do_kmalloc_node mm/slab_common.c:965 [inline]
[<000000008c16ea3d>] __kmalloc+0x4a/0x130 mm/slab_common.c:979
[<000000003addde56>] kmalloc include/linux/slab.h:563 [inline]
[<000000003addde56>] sk_prot_alloc+0xef/0x1b0 net/core/sock.c:2035
[<000000003e20621f>] sk_alloc+0x36/0x2f0 net/core/sock.c:2088
[<0000000028e43843>] tun_chr_open+0x3d/0x190 drivers/net/tun.c:3438
[<000000001b0f1f28>] misc_open+0x1a6/0x1f0 drivers/char/misc.c:165
[<000000004376f706>] chrdev_open+0x111/0x300 fs/char_dev.c:414
[<00000000614d379f>] do_dentry_open+0x2f9/0x750 fs/open.c:920
[<000000008eb24774>] do_open fs/namei.c:3636 [inline]
[<000000008eb24774>] path_openat+0x143f/0x1a30 fs/namei.c:3791
[<00000000955077b5>] do_filp_open+0xce/0x1c0 fs/namei.c:3818
[<00000000b78973b0>] do_sys_openat2+0xf0/0x260 fs/open.c:1356
[<00000000057be699>] do_sys_open fs/open.c:1372 [inline]
[<00000000057be699>] __do_sys_openat fs/open.c:1388 [inline]
[<00000000057be699>] __se_sys_openat fs/open.c:1383 [inline]
[<00000000057be699>] __x64_sys_openat+0x83/0xf0 fs/open.c:1383
[<00000000a7d2182d>] do_syscall_x64 arch/x86/entry/common.c:50 [inline]
[<00000000a7d2182d>] do_syscall_64+0x3c/0x90 arch/x86/entry/common.c:80
[<000000004cc4e8c4>] entry_SYSCALL_64_after_hwframe+0x72/0xdc
unreferenced object 0xffff88802f671700 (size 240):
comm "syz-executor.1", pid 33269, jiffies 4295743854 (age 18.736s)
hex dump (first 32 bytes):
68 c9 db 1e 80 88 ff ff 68 c9 db 1e 80 88 ff ff h.......h.......
00 c0 7b 2f 80 88 ff ff 00 c8 db 1e 80 88 ff ff ..{/............
backtrace:
[<00000000e9d9fdb6>] __alloc_skb+0x223/0x250 net/core/skbuff.c:644
[<000000002c3e4e0b>] alloc_skb include/linux/skbuff.h:1288 [inline]
[<000000002c3e4e0b>] alloc_skb_with_frags+0x6f/0x350 net/core/skbuff.c:6378
[<00000000825f98d7>] sock_alloc_send_pskb+0x3ac/0x3e0 net/core/sock.c:2729
[<00000000e9eb3df3>] tun_alloc_skb drivers/net/tun.c:1529 [inline]
[<00000000e9eb3df3>] tun_get_user+0x5e1/0x1f90 drivers/net/tun.c:1841
[<0000000053096912>] tun_chr_write_iter+0xac/0x120 drivers/net/tun.c:2035
[<00000000b9282ae0>] call_write_iter include/linux/fs.h:1868 [inline]
[<00000000b9282ae0>] new_sync_write fs/read_write.c:491 [inline]
[<00000000b9282ae0>] vfs_write+0x40f/0x530 fs/read_write.c:584
[<00000000524566e4>] ksys_write+0xa1/0x170 fs/read_write.c:637
[<00000000a7d2182d>] do_syscall_x64 arch/x86/entry/common.c:50 [inline]
[<00000000a7d2182d>] do_syscall_64+0x3c/0x90 arch/x86/entry/common.c:80
[<000000004cc4e8c4>] entry_SYSCALL_64_after_hwframe+0x72/0xdc
Fixes: cde8b15f1aab ("tuntap: add ioctl to attach or detach a file form tuntap device")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Disable interrupts in error path of probe function.
Fixes: 26ad340e582d ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices")
Cc: stable@vger.kernel.org
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://lore.kernel.org/r/20230516134318.104279-7-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Under certain circumstances we send two EFLUSH commands, resulting in two
EFLUSH ack packets, while only expecting a single EFLUSH ack.
This can cause the driver Tx flush completion to get out of sync.
To avoid this problem, don't enable the "Transmit buffer flush done" (TFD)
interrupt and remove the code handling it.
Now we only send EFLUSH command after receiving status packet with
"Init detected" (IDET) bit set.
Fixes: 26ad340e582d ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices")
Cc: stable@vger.kernel.org
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://lore.kernel.org/r/20230516134318.104279-6-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
