| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy fixes from Vinod Koul:
- Qualcomm PCS table fix for ufs phy
- TI device node reference fix
- Common prop kconfig fix
- lynx CDR lock workaround for lanes disabled
- usb disconnect function fix of k1 driver
* tag 'phy-fixes-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
phy: qcom: qmp-ufs: Fix SM8650 PCS table for Gear 4
phy: ti: j721e-wiz: Fix device node reference leak in wiz_get_lane_phy_types()
phy: k1-usb: add disconnect function support
phy: lynx-28g: skip CDR lock workaround for lanes disabled in the device tree
phy: make PHY_COMMON_PROPS Kconfig symbol conditionally user-selectable
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine fixes from Vinod Koul:
"A bunch of driver fixes with idxd ones being the biggest:
- Xilinx regmap init error handling, dma_device directions, residue
calculation, and reset related timeout fixes
- Renesas CHCTRL updates and driver list fixes
- DW HDMA cycle bits and MSI data programming fix
- IDXD pile of fixes for memeory leak and FLR fixes"
* tag 'dmaengine-fix-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (21 commits)
dmaengine: xilinx_dma: Fix reset related timeout with two-channel AXIDMA
dmaengine: xilinx: xilinx_dma: Fix unmasked residue subtraction
dmaengine: xilinx: xilinx_dma: Fix residue calculation for cyclic DMA
dmaengine: xilinx: xilinx_dma: Fix dma_device directions
dmaengine: sh: rz-dmac: Move CHCTRL updates under spinlock
dmaengine: sh: rz-dmac: Protect the driver specific lists
dmaengine: idxd: fix possible wrong descriptor completion in llist_abort_desc()
dmaengine: xilinx: xdma: Fix regmap init error handling
dmaengine: dw-edma: Fix multiple times setting of the CYCLE_STATE and CYCLE_BIT bits for HDMA.
dmaengine: idxd: Fix leaking event log memory
dmaengine: idxd: Fix freeing the allocated ida too late
dmaengine: idxd: Fix memory leak when a wq is reset
dmaengine: idxd: Fix not releasing workqueue on .release()
dmaengine: idxd: Wait for submitted operations on .device_synchronize()
dmaengine: idxd: Flush all pending descriptors
dmaengine: idxd: Flush kernel workqueues on Function Level Reset
dmaengine: idxd: Fix possible invalid memory access after FLR
dmaengine: idxd: Fix crash when the event log is disabled
dmaengine: idxd: Fix lockdep warnings when calling idxd_device_config()
dmaengine: dw-edma: fix MSI data programming for multi-IRQ case
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
- designware: fix resume-probe race causing NULL-deref in amdisp
- imx: fix timeout on repeated reads and extra clock at end
- MAINTAINERS: drop outdated I2C website
* tag 'i2c-for-7.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
MAINTAINERS: drop outdated I2C website
i2c: designware: amdisp: Fix resume-probe race condition issue
i2c: imx: ensure no clock is generated after last read
i2c: imx: fix i2c issue when reading multiple messages
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fix from Juergen Gross:
"A single fix for a very rare bug introduced in rc5"
* tag 'for-linus-7.0a-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/privcmd: unregister xenstore notifier on module exit
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Ingo Molnar:
- Fix TX completion signaling bug in the Qualcomm MPM irqchip driver
- Fix probe error handling in the Renesas RZ/V2H(P) irqchip driver
* tag 'irq-urgent-2026-03-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/renesas-rzv2h: Fix error path in rzv2h_icu_probe_common()
irqchip/qcom-mpm: Add missing mailbox TX done acknowledgment
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- PMBus driver fixes:
- Add mutex protection for regulator operations
- Fix reading from "write-only" attributes
- Mark lowest/average/highest/rated attributes as read-only
- isl68137: Add mutex protection for AVS enable sysfs attributes
- ina233: Fix error handling and sign extension when reading shunt voltage
- adm1177: Fix sysfs ABI violation and current unit conversion
- peci: Fix off-by-one in cputemp_is_visible(), and crit_hyst returning
delta instead of absolute temperature
* tag 'hwmon-for-v7.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (pmbus/core) Protect regulator operations with mutex
hwmon: (pmbus) Introduce the concept of "write-only" attributes
hwmon: (pmbus) Mark lowest/average/highest/rated attributes as read-only
hwmon: (adm1177) fix sysfs ABI violation and current unit conversion
hwmon: (peci/cputemp) Fix off-by-one in cputemp_is_visible()
hwmon: (peci/cputemp) Fix crit_hyst returning delta instead of absolute temperature
hwmon: (pmbus/isl68137) Add mutex protection for AVS enable sysfs attributes
hwmon: (pmbus/ina233) Fix error handling and sign extension in shunt voltage read
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Driver (and enclosure) only fixes. Most are obvious. The big change is
in the tcm_loop driver to add command draining to error handling (the
lack of which was causing hangs with the potential for double use
crashes)"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: target: file: Use kzalloc_flex for aio_cmd
scsi: scsi_transport_sas: Fix the maximum channel scanning issue
scsi: target: tcm_loop: Drain commands in target_reset handler
scsi: ibmvfc: Fix OOB access in ibmvfc_discover_targets_done()
scsi: ses: Handle positive SCSI error from ses_recv_diag()
|
|
Pull drm fixes from Dave Airlie:
"Weekly fixes, still a bit busy, but the usual suspects amdgpu and
i915/xe have a bunch of small fixes, and otherwise it's just a few
minor driver fixes.
loognsoon:
- update MAINTAINERS
shmem:
- fault handler fix
syncobj:
- fix GFP flags
amdgpu:
- DSC fix
- Module parameter parsing fix
- PASID reuse fix
- drm_edid leak fix
- SMU 13.x fixes
- SMU 14.x fix
- Fence fix in amdgpu_amdkfd_submit_ib()
- LVDS fixes
- GPU page fault fix for non-4K pages
amdkfd:
- Ordering fix in kfd_ioctl_create_process()
i915/display:
- DP tunnel error handling fix
- Spurious GMBUS timeout fix
- Unlink NV12 planes earlier
- Order OP vs. timeout correctly in __wait_for()
xe:
- Fix UAF in SRIOV migration restore
- Updates to HW W/a
- VMBind remap fix
ivpu:
- poweroff fix
mediatek:
- fix register ordering"
* tag 'drm-fixes-2026-03-28-1' of https://gitlab.freedesktop.org/drm/kernel: (25 commits)
MAINTAINERS: Update GPU driver maintainer information
drm/xe: always keep track of remap prev/next
drm/syncobj: Fix xa_alloc allocation flags
drm/amd/display: Fix DCE LVDS handling
drm/amdgpu: Handle GPU page faults correctly on non-4K page systems
drm/amd/pm: disable OD_FAN_CURVE if temp or pwm range invalid for smu v14
drm/amdkfd: Fix NULL pointer check order in kfd_ioctl_create_process
drm/amd/display: check if ext_caps is valid in BL setup
drm/amdgpu: Fix fence put before wait in amdgpu_amdkfd_submit_ib
drm/xe: Implement recent spec updates to Wa_16025250150
accel/ivpu: Add disable clock relinquish workaround for NVL-A0
drm/i915/dp_tunnel: Fix error handling when clearing stream BW in atomic state
drm/amd/pm: disable OD_FAN_CURVE if temp or pwm range invalid for smu v13
drm/amd/pm: Return -EOPNOTSUPP for unsupported OD_MCLK on smu_v13_0_6
drm/amd/pm: Skip redundant UCLK restore in smu_v13_0_6
drm/amd/display: Fix drm_edid leak in amdgpu_dm
drm/amdgpu: prevent immediate PASID reuse case
drm/amdgpu: fix strsep() corrupting lockup_timeout on multi-GPU (v3)
drm/amd/display: Do not skip unrelated mode changes in DSC validation
drm/xe/pf: Fix use-after-free in migration restore
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"There are two core fixes here. One is from Johan dealing with an issue
introduced by a devm_ API usage update causing things to be freed
earlier than they had earlier when we fail to register a device,
another from Danilo avoids unlocked acccess to data by converting to
use a driver core API.
We also have a few relatively minor driver specific fixes"
* tag 'spi-fix-v7.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spi-fsl-lpspi: fix teardown order issue (UAF)
spi: fix use-after-free on managed registration failure
spi: use generic driver_override infrastructure
spi: meson-spicc: Fix double-put in remove path
spi: sn-f-ospi: Use devm_mutex_init() to simplify code
spi: sn-f-ospi: Fix resource leak in f_ospi_probe()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap fix from Mark Brown:
"A fix from Andy Shevchenko for an issue with caching of page selector
registers which are located inside the page they are switching"
* tag 'regmap-fix-v7.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: Synchronize cache for the page selector
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/devsec/tsm
Pull tsm fix from Dan Williams:
- Fix a VMM controlled buffer length used to emit TDX attestation
reports
* tag 'tsm-fixes-7.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/devsec/tsm:
virt: tdx-guest: Fix handling of host controlled 'quote' buffer length
|
|
Pull VFIO fix from Alex Williamson:
- Fix double-free and reference count underflow if dma-buf file
allocation fails (Alex Williamson)
* tag 'vfio-v7.0-rc6' of https://github.com/awilliam/linux-vfio:
vfio/pci: Fix double free in dma-buf feature
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-fixes
Mediatek DRM Fixes - 20260323
1. dsi: Store driver data before invoking mipi_dsi_host_register
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://patch.msgid.link/20260323160135.39609-1-chunkuang.hu@kernel.org
|
|
Pull rdma fixes from Jason Gunthorpe:
- Quite a few irdma bug fixes, several user triggerable
- Fix a 0 SMAC header in ionic
- Tolerate FW errors for RAAS in bng_re
- Don't UAF in efa when printing error events
- Better handle pool exhaustion in the new bvec paths
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/irdma: Harden depth calculation functions
RDMA/irdma: Return EINVAL for invalid arp index error
RDMA/irdma: Fix deadlock during netdev reset with active connections
RDMA/irdma: Remove reset check from irdma_modify_qp_to_err()
RDMA/irdma: Clean up unnecessary dereference of event->cm_node
RDMA/irdma: Remove a NOP wait_event() in irdma_modify_qp_roce()
RDMA/irdma: Update ibqp state to error if QP is already in error state
RDMA/irdma: Initialize free_qp completion before using it
RDMA/efa: Fix possible deadlock
RDMA/rw: Fix MR pool exhaustion in bvec RDMA READ path
RDMA/rw: Fall back to direct SGE on MR pool exhaustion
RDMA/efa: Fix use of completion ctx after free
RDMA/bng_re: Fix silent failure in HWRM version query
RDMA/ionic: Preserve and set Ethernet source MAC after ib_ud_header_init()
RDMA/irdma: Fix double free related to rereg_user_mr
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci fixes from Bjorn Helgaas:
- Remove power-off from pwrctrl drivers since this is now done directly
by the PCI controller drivers (Chen-Yu Tsai)
- Fix pwrctrl device node leak (Felix Gu)
- Document a TLP header decoder for AER log messages (Lukas Wunner)
* tag 'pci-v7.0-fixes-5' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
Documentation: PCI: Document PCIe TLP Header decoder for AER messages
PCI/pwrctrl: Fix pci_pwrctrl_is_required() device node leak
PCI/pwrctrl: Do not power off on pwrctrl device removal
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
- uvcvideo may cause OOPS when out of memory
- remove a deadlock in the ccs driver
* tag 'media/v7.0-6' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: ccs: Avoid deadlock in ccs_init_state()
media: uvcvideo: Fix bug in error path of uvc_alloc_urb_buffers
|
|
Identified resume-probe race condition in kernel v7.0 with the commit
38fa29b01a6a ("i2c: designware: Combine the init functions"),but this
issue existed from the beginning though not detected.
The amdisp i2c device requires ISP to be in power-on state for probe
to succeed. To meet this requirement, this device is added to genpd
to control ISP power using runtime PM. The pm_runtime_get_sync() called
before i2c_dw_probe() triggers PM resume, which powers on ISP and also
invokes the amdisp i2c runtime resume before the probe completes resulting
in this race condition and a NULL dereferencing issue in v7.0
Fix this race condition by using the genpd APIs directly during probe:
- Call dev_pm_genpd_resume() to Power ON ISP before probe
- Call dev_pm_genpd_suspend() to Power OFF ISP after probe
- Set the device to suspended state with pm_runtime_set_suspended()
- Enable runtime PM only after the device is fully initialized
Fixes: d6263c468a761 ("i2c: amd-isp: Add ISP i2c-designware driver")
Co-developed-by: Bin Du <bin.du@amd.com>
Signed-off-by: Bin Du <bin.du@amd.com>
Signed-off-by: Pratap Nirujogi <pratap.nirujogi@amd.com>
Cc: <stable@vger.kernel.org> # v6.16+
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260320201302.3490570-1-pratap.nirujogi@amd.com
|
|
When reading from the I2DR register, right after releasing the bus by
clearing MSTA and MTX, the I2C controller might still generate an
additional clock cycle which can cause devices to misbehave. Ensure to
only read from I2DR after the bus is not busy anymore. Because this
requires polling, the read of the last byte is moved outside of the
interrupt handler.
An example for such a failing transfer is this:
i2ctransfer -y -a 0 w1@0x00 0x02 r1
Error: Sending messages failed: Connection timed out
It does not happen with every device because not all devices react to
the additional clock cycle.
Fixes: 5f5c2d4579ca ("i2c: imx: prevent rescheduling in non dma mode")
Cc: stable@vger.kernel.org # v6.13+
Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260218150940.131354-3-eichest@gmail.com
|
|
When reading multiple messages, meaning a repeated start is required,
polling the bus busy bit must be avoided. This must only be done for
the last message. Otherwise, the driver will timeout.
Here an example of such a sequence that fails with an error:
i2ctransfer -y -a 0 w1@0x00 0x02 r1 w1@0x00 0x02 r1
Error: Sending messages failed: Connection timed out
Fixes: 5f5c2d4579ca ("i2c: imx: prevent rescheduling in non dma mode")
Cc: stable@vger.kernel.org # v6.13+
Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260218150940.131354-2-eichest@gmail.com
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
- Fix UAF in SRIOV migration restore (Winiarski)
- Updates to HW W/a (Roper)
- VMBind remap fix (Auld)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/acUgq2q2DrCUzFql@intel.com
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
A page mapping fix for shmem fault handler, a power-off fix for ivpu, a
GFP_* flag fix for syncobj, and a MAINTAINERS update.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patch.msgid.link/20260326-lush-cuddly-limpet-ab2aa9@houat
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes
- DP tunnel error handling fix
- Spurious GMBUS timeout fix
- Unlink NV12 planes earlier
- Order OP vs. timeout correctly in __wait_for()
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patch.msgid.link/acTdjAoOGkzl3dcc@jlahtine-mobl
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix two cpufreq issues, one in the core and one in the
conservative governor, and two issues related to system sleep:
- Restore the cpufreq core behavior changed inadvertently during the
6.19 development cycle to call cpufreq_frequency_table_cpuinfo()
for cpufreq policies getting re-initialized which ensures that
policy->max and policy->cpuinfo_max_freq will be valid going
forward (Viresh Kumar)
- Adjust the cached requested frequency in the conservative cpufreq
governor on policy limits changes to prevent it from becoming stale
in some cases (Viresh Kumar)
- Prevent pm_restore_gfp_mask() from triggering a WARN_ON() in some
code paths in which it is legitimately called without invoking
pm_restrict_gfp_mask() previously (Youngjun Park)
- Update snapshot_write_finalize() to take trailing zero pages into
account properly which prevents user space restore from failing
subsequently in some cases (Alberto Garcia)"
* tag 'pm-7.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: sleep: Drop spurious WARN_ON() from pm_restore_gfp_mask()
PM: hibernate: Drain trailing zero pages on userspace restore
cpufreq: conservative: Reset requested_freq on limits change
cpufreq: Don't skip cpufreq_frequency_table_cpuinfo()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fix from Rafael Wysocki:
"This prevents the int340x thermal driver from taking the power slider
offset parameter into account incorrectly in some cases (Srinivas
Pandruvada)"
* tag 'thermal-7.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: intel: int340x: soc_slider: Set offset only for balanced mode
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI support fix from Rafael Wysocki:
"Prevent use-after-free from occurring on reduced-hardware ACPI
platforms when -EPROBE_DEFER is returned by ec_install_handlers()
during ACPI EC driver initialization (Weiming Shi)"
* tag 'acpi-7.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: EC: clean up handlers on probe failure in acpi_ec_setup()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from Bluetooth, CAN, IPsec and Netfilter.
Notably, this includes the fix for the Bluetooth regression that you
were notified about. I'm not aware of any other pending regressions.
Current release - regressions:
- bluetooth:
- fix stack-out-of-bounds read in l2cap_ecred_conn_req
- fix regressions caused by reusing ident
- netfilter: revisit array resize logic
- eth: ice: set max queues in alloc_etherdev_mqs()
Previous releases - regressions:
- core: correctly handle tunneled traffic on IPV6_CSUM GSO fallback
- bluetooth:
- fix dangling pointer on mgmt_add_adv_patterns_monitor_complete
- fix deadlock in l2cap_conn_del()
- sched: codel: fix stale state for empty flows in fq_codel
- ipv6: remove permanent routes from tb6_gc_hlist when all exceptions expire.
- xfrm: fix skb_put() panic on non-linear skb during reassembly
- openvswitch:
- avoid releasing netdev before teardown completes
- validate MPLS set/set_masked payload length
- eth: iavf: fix out-of-bounds writes in iavf_get_ethtool_stats()
Previous releases - always broken:
- bluetooth: fix null-ptr-deref on l2cap_sock_ready_cb
- udp: fix wildcard bind conflict check when using hash2
- netfilter: fix use of uninitialized rtp_addr in process_sdp
- tls: Purge async_hold in tls_decrypt_async_wait()
- xfrm:
- prevent policy_hthresh.work from racing with netns teardown
- fix skb leak with espintcp and async crypto
- smc: fix double-free of smc_spd_priv when tee() duplicates splice pipe buffer
- can:
- add missing error handling to call can_ctrlmode_changelink()
- fix OOB heap access in cgw_csum_crc8_rel()
- eth:
- mana: fix use-after-free in add_adev() error path
- virtio-net: fix for VIRTIO_NET_F_GUEST_HDRLEN
- bcmasp: fix double free of WoL irq"
* tag 'net-7.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (90 commits)
net: macb: use the current queue number for stats
netfilter: ctnetlink: use netlink policy range checks
netfilter: nf_conntrack_sip: fix use of uninitialized rtp_addr in process_sdp
netfilter: nf_conntrack_expect: skip expectations in other netns via proc
netfilter: nf_conntrack_expect: store netns and zone in expectation
netfilter: ctnetlink: ensure safe access to master conntrack
netfilter: nf_conntrack_expect: use expect->helper
netfilter: nf_conntrack_expect: honor expectation helper field
netfilter: nft_set_rbtree: revisit array resize logic
netfilter: ip6t_rt: reject oversized addrnr in rt_mt6_check()
netfilter: nfnetlink_log: fix uninitialized padding leak in NFULA_PAYLOAD
tls: Purge async_hold in tls_decrypt_async_wait()
selftests: netfilter: nft_concat_range.sh: add check for flush+reload bug
netfilter: nft_set_pipapo_avx2: don't return non-matching entry on expiry
Bluetooth: btusb: clamp SCO altsetting table indices
Bluetooth: L2CAP: Fix ERTM re-init and zero pdu_len infinite loop
Bluetooth: L2CAP: Fix deadlock in l2cap_conn_del()
Bluetooth: btintel: serialize btintel_hw_error() with hci_req_sync_lock
Bluetooth: L2CAP: Fix send LE flow credits in ACL link
net: mana: fix use-after-free in add_adev() error path
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
- Implement .get_direction() in the spmi-gpio gpio_chip
Recent changes makes this start to print warnings and it's not nice,
let's just fix it
- Clamp the return value of gpio_get() in the Renesas RZA1 driver
- Add the GPIO_GENERIC dependency to the STM32 HDP driver
- Modify the Mediatek driver to accept devices that do not use external
interrupts (EINT) at all
- Fix flag propagation in the Sunxi driver, so that we can fix an issue
with uninitialized pins in a follow-up patch using said flags
* tag 'pinctrl-v7.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: sunxi: fix gpiochip_lock_as_irq() failure when pinmux is unknown
pinctrl: sunxi: pass down flags to pinctrl routines
pinctrl: mediatek: common: Fix probe failure for devices without EINT
pinctrl: stm32: fix HDP driver dependency on GPIO_GENERIC
pinctrl: renesas: rza1: Normalize return value of gpio_get()
pinctrl: qcom: spmi-gpio: implement .get_direction()
pinctrl: renesas: rzt2h: Fix invalid wait context
pinctrl: renesas: rzt2h: Fix device node leak in rzt2h_gpio_register()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux
Pull dma-mapping fixes from Marek Szyprowski:
"A set of fixes for DMA-mapping subsystem, which resolve false-
positive warnings from KMSAN and DMA-API debug (Shigeru Yoshida
and Leon Romanovsky) as well as a simple build fix (Miguel Ojeda)"
* tag 'dma-mapping-7.0-2026-03-25' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux:
dma-mapping: add missing `inline` for `dma_free_attrs`
mm/hmm: Indicate that HMM requires DMA coherency
RDMA/umem: Tell DMA mapping that UMEM requires coherency
iommu/dma: add support for DMA_ATTR_REQUIRE_COHERENT attribute
dma-direct: prevent SWIOTLB path when DMA_ATTR_REQUIRE_COHERENT is set
dma-mapping: Introduce DMA require coherency attribute
dma-mapping: Clarify valid conditions for CPU cache line overlap
dma-mapping: handle DMA_ATTR_CPU_CACHE_CLEAN in trace output
dma-debug: Allow multiple invocations of overlapping entries
dma: swiotlb: add KMSAN annotations to swiotlb_bounce()
|
|
Replace pm_runtime_put() with pm_runtime_put_sync() when
irq_domain_create_hierarchy() fails to ensure the device suspends
synchronously before devres cleanup disables runtime PM via
pm_runtime_disable().
Fixes: 5ec8cabc3b86 ("irqchip/renesas-rzv2h: Use devm_pm_runtime_enable()")
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260323124917.41602-1-biju.das.jz@bp.renesas.com
|
|
The mbox_client for qcom-mpm sends NULL doorbell messages via
mbox_send_message() but never signals TX completion.
Set knows_txdone=true and call mbox_client_txdone() after a successful
send, matching the pattern used by other Qualcomm mailbox clients (smp2p,
smsm, qcom_aoss etc).
Fixes: a6199bb514d8a6 "irqchip: Add Qualcomm MPM controller driver"
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260322171533.608436-1-jassisinghbrar@gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
For ice:
Michal corrects call to alloc_etherdev_mqs() to provide maximum number
of queues supported rather than currently allocated number of queues.
Petr Oros fixes issues related to some ethtool operations in switchdev
mode.
For iavf:
Kohei Enju corrects number of reported queues for ethtool statistics to
absolute max as using current number could race and cause out-of-bounds
issues.
For idpf:
Josh NULLs cdev_info pointer after freeing to prevent possible subsequent
improper access. He also defers setting of refillqs value until after
allocation to prevent possible NULL pointer dereference.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
idpf: only assign num refillqs if allocation was successful
idpf: clear stale cdev_info ptr
iavf: fix out-of-bounds writes in iavf_get_ethtool_stats()
ice: use ice_update_eth_stats() for representor stats
ice: fix inverted ready check for VF representors
ice: set max queues in alloc_etherdev_mqs()
====================
Link: https://patch.msgid.link/20260323205843.624704-1-anthony.l.nguyen@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
There's a potential mismatch between the memory reserved for statistics
and the amount of memory written.
gem_get_sset_count() correctly computes the number of stats based on the
active queues, whereas gem_get_ethtool_stats() indiscriminately copies
data using the maximum number of queues, and in the case the number of
active queues is less than MACB_MAX_QUEUES, this results in a OOB write
as observed in the KASAN splat.
==================================================================
BUG: KASAN: vmalloc-out-of-bounds in gem_get_ethtool_stats+0x54/0x78
[macb]
Write of size 760 at addr ffff80008080b000 by task ethtool/1027
CPU: [...]
Tainted: [E]=UNSIGNED_MODULE
Hardware name: raspberrypi rpi/rpi, BIOS 2025.10 10/01/2025
Call trace:
show_stack+0x20/0x38 (C)
dump_stack_lvl+0x80/0xf8
print_report+0x384/0x5e0
kasan_report+0xa0/0xf0
kasan_check_range+0xe8/0x190
__asan_memcpy+0x54/0x98
gem_get_ethtool_stats+0x54/0x78 [macb
926c13f3af83b0c6fe64badb21ec87d5e93fcf65]
dev_ethtool+0x1220/0x38c0
dev_ioctl+0x4ac/0xca8
sock_do_ioctl+0x170/0x1d8
sock_ioctl+0x484/0x5d8
__arm64_sys_ioctl+0x12c/0x1b8
invoke_syscall+0xd4/0x258
el0_svc_common.constprop.0+0xb4/0x240
do_el0_svc+0x48/0x68
el0_svc+0x40/0xf8
el0t_64_sync_handler+0xa0/0xe8
el0t_64_sync+0x1b0/0x1b8
The buggy address belongs to a 1-page vmalloc region starting at
0xffff80008080b000 allocated at dev_ethtool+0x11f0/0x38c0
The buggy address belongs to the physical page:
page: refcount:1 mapcount:0 mapping:0000000000000000
index:0xffff00000a333000 pfn:0xa333
flags: 0x7fffc000000000(node=0|zone=0|lastcpupid=0x1ffff)
raw: 007fffc000000000 0000000000000000 dead000000000122 0000000000000000
raw: ffff00000a333000 0000000000000000 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff80008080b080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff80008080b100: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffff80008080b180: 00 00 00 00 00 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
^
ffff80008080b200: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
ffff80008080b280: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
==================================================================
Fix it by making sure the copied size only considers the active number of
queues.
Fixes: 512286bbd4b7 ("net: macb: Added some queue statistics")
Signed-off-by: Paolo Valerio <pvalerio@redhat.com>
Reviewed-by: Nicolai Buchwitz <nb@tipi-net.de>
Link: https://patch.msgid.link/20260323191634.2185840-1-pvalerio@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The error path through vfio_pci_core_feature_dma_buf() ignores its
own advice to only use dma_buf_put() after dma_buf_export(), instead
falling through the entire unwind chain. In the unlikely event that
we encounter file descriptor exhaustion, this can result in an
unbalanced refcount on the vfio device and double free of allocated
objects.
Avoid this by moving the "put" directly into the error path and return
the errno rather than entering the unwind chain.
Reported-by: Renato Marziano <renato@marziano.top>
Fixes: 5d74781ebc86 ("vfio/pci: Add dma-buf export support for MMIO regions")
Cc: stable@vger.kernel.org
Acked-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@nvidia.com>
Link: https://lore.kernel.org/r/20260323215659.2108191-3-alex.williamson@nvidia.com
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Alex Williamson <alex@shazbot.org>
|
|
There is a teardown order issue in the driver. The SPI controller is
registered using devm_spi_register_controller(), which delays
unregistration of the SPI controller until after the fsl_lpspi_remove()
function returns.
As the fsl_lpspi_remove() function synchronously tears down the DMA
channels, a running SPI transfer triggers the following NULL pointer
dereference due to use after free:
| fsl_lpspi 42550000.spi: I/O Error in DMA RX
| Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
[...]
| Call trace:
| fsl_lpspi_dma_transfer+0x260/0x340 [spi_fsl_lpspi]
| fsl_lpspi_transfer_one+0x198/0x448 [spi_fsl_lpspi]
| spi_transfer_one_message+0x49c/0x7c8
| __spi_pump_transfer_message+0x120/0x420
| __spi_sync+0x2c4/0x520
| spi_sync+0x34/0x60
| spidev_message+0x20c/0x378 [spidev]
| spidev_ioctl+0x398/0x750 [spidev]
[...]
Switch from devm_spi_register_controller() to spi_register_controller() in
fsl_lpspi_probe() and add the corresponding spi_unregister_controller() in
fsl_lpspi_remove().
Fixes: 5314987de5e5 ("spi: imx: add lpspi bus driver")
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://patch.msgid.link/20260319-spi-fsl-lpspi-fixes-v1-1-b433e435b2d8@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The sub-device state lock has been already acquired when ccs_init_state()
is called. Do not try to acquire it again.
Reported-by: David Heidelberg <david@ixit.cz>
Fixes: a88883d1209c ("media: ccs: Rely on sub-device state locking")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Recent cleanup introduced a bug in the error path of
uvc_alloc_urb_buffers(). If there is not enough memory for the
allocation the following error will be triggered:
[ 739.196672] UBSAN: shift-out-of-bounds in mm/page_alloc.c:1403:22
[ 739.196710] shift exponent 52 is too large for 32-bit type 'int'
Resulting in:
[ 740.464422] BUG: unable to handle page fault for address: fffffac1c0800000
The reason for the bug is that usb_free_noncoherent is called with an
invalid size (0) instead of the actual size of the urb.
This patch takes care of that.
Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Closes: https://lore.kernel.org/linux-media/abycbXzYupZpGkvR@hyeyoo/T/#t
Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Fixes: c824345288d1 ("media: uvcvideo: Pass allocation size directly to uvc_alloc_urb_buffer")
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patch.msgid.link/20260320-uvc-urb-free-error-v1-1-b12cc3762a19@chromium.org
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The SPI API is asymmetric and the controller is freed as part of
deregistration (unless it has been allocated using
devm_spi_alloc_host/target()).
A recent change converting the managed registration function to use
devm_add_action_or_reset() inadvertently introduced a (mostly
theoretical) regression where a non-devres managed controller could be
freed as part of failed registration. This in turn would lead to
use-after-free in controller driver error paths.
Fix this by taking another reference before calling
devm_add_action_or_reset() and not releasing it on errors for
non-devres allocated controllers.
An alternative would be a partial revert of the offending commit, but
it is better to handle this explicitly until the API has been fixed
(e.g. see 5e844cc37a5c ("spi: Introduce device-managed SPI controller
allocation")).
Fixes: b6376dbed8e1 ("spi: Simplify devm_spi_*_controller()")
Reported-by: Felix Gu <ustc.gu@gmail.com>
Link: https://lore.kernel.org/all/20260324145548.139952-1-ustc.gu@gmail.com/
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260325145319.1132072-1-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Commit 453b8fb68f36 ("xen/privcmd: restrict usage in
unprivileged domU") added a xenstore notifier to defer setting the
restriction target until Xenstore is ready.
XEN_PRIVCMD can be built as a module, but privcmd_exit() leaves that
notifier behind. Balance the notifier lifecycle by unregistering it on
module exit.
This is harmless even if xenstore was already ready at registration
time and the notifier was never queued on the chain.
Fixes: 453b8fb68f3641fe ("xen/privcmd: restrict usage in unprivileged domU")
Signed-off-by: GuoHan Zhao <zhaoguohan@kylinos.cn>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-ID: <20260325120246.252899-1-zhaoguohan@kylinos.cn>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
"Fixes and New HW Support. The trivial drop of unused gz_chain_head is
not exactly fixes material but it allows other work to avoid problems
so I decided to take it in along with the fixes.
- amd/hsmp: Fix typo in error message
- asus-armoury: Add support for G614FP, GA503QM, GZ302EAC, and GZ302EAC
- asus-nb-wmi: Add DMI quirk for ASUS ROG Flow Z13-KJP GZ302EAC
- hp-wmi: Support for Omen 16-k0xxx, 16-wf1xxx, 16-xf0xxx
- intel-hid: Disable wakeup_mode during hibernation
- ISST:
- Check HWP support before MSR access
- Correct locked bit width
- lenovo: wmi-gamezone: Drop unused gz_chain_head
- olpc-xo175-ec: Fix overflow error message"
* tag 'platform-drivers-x86-v7.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: ISST: Correct locked bit width
platform/x86: intel-hid: disable wakeup_mode during hibernation
platform/x86: asus-armoury: add support for GZ302EA and GZ302EAC
platform/x86: asus-nb-wmi: add DMI quirk for ASUS ROG Flow Z13-KJP GZ302EAC
platform/x86/amd/hsmp: Fix typo in error message
platform/olpc: olpc-xo175-ec: Fix overflow error message to print inlen
platform/x86: lenovo: wmi-gamezone: Drop gz_chain_head
platform/x86: ISST: Check HWP support before MSR access
platform/x86: hp-wmi: Add support for Omen 16-k0xxx (8A4D)
platform/x86: hp-wmi: Add support for Omen 16-wf1xxx (8C76)
platform/x86: hp-wmi: Add Omen 16-xf0xxx (8BCA) support
platform/x86: asus-armoury: add support for G614FP
platform/x86: asus-armoury: add support for GA503QM
MAINTAINERS: change email address of Denis Benato
|
|
The regulator operations pmbus_regulator_get_voltage(),
pmbus_regulator_set_voltage(), and pmbus_regulator_list_voltage()
access PMBus registers and shared data but were not protected by
the update_lock mutex. This could lead to race conditions.
However, adding mutex protection directly to these functions causes
a deadlock because pmbus_regulator_notify() (which calls
regulator_notifier_call_chain()) is often called with the mutex
already held (e.g., from pmbus_fault_handler()). If a regulator
callback then calls one of the now-protected voltage functions,
it will attempt to acquire the same mutex.
Rework pmbus_regulator_notify() to utilize a worker function to
send notifications outside of the mutex protection. Events are
stored as atomics in a per-page bitmask and processed by the worker.
Initialize the worker and its associated data during regulator
registration, and ensure it is cancelled on device removal using
devm_add_action_or_reset().
While at it, remove the unnecessary include of linux/of.h.
Cc: Sanman Pradhan <psanman@juniper.net>
Fixes: ddbb4db4ced1b ("hwmon: (pmbus) Add regulator support")
Reviewed-by: Sanman Pradhan <psanman@juniper.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Attributes intended to clear sensor history are intended to be writeable
only. Reading those attributes today results in reporting more or less
random values. To avoid ABI surprises, have those attributes explicitly
return 0 when reading.
Fixes: 787c095edaa9d ("hwmon: (pmbus/core) Add support for rated attributes")
Reviewed-by: Sanman Pradhan <psanman@juniper.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Writing those attributes is not supported, so mark them as read-only.
Prior to this change, attempts to write into these attributes returned
an error.
Mark boolean fields in struct pmbus_limit_attr and in struct
pmbus_sensor_attr as bit fields to reduce configuration data size.
The data is scanned only while probing, so performance is not a concern.
Fixes: 6f183d33a02e6 ("hwmon: (pmbus) Add support for peak attributes")
Reviewed-by: Sanman Pradhan <psanman@juniper.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
btusb_work() maps the number of active SCO links to USB alternate
settings through a three-entry lookup table when CVSD traffic uses
transparent voice settings. The lookup currently indexes alts[] with
data->sco_num - 1 without first constraining sco_num to the number of
available table entries.
While the table only defines alternate settings for up to three SCO
links, data->sco_num comes from hci_conn_num() and is used directly.
Cap the lookup to the last table entry before indexing it so the
driver keeps selecting the highest supported alternate setting without
reading past alts[].
Fixes: baac6276c0a9 ("Bluetooth: btusb: handle mSBC audio over USB Endpoints")
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
btintel_hw_error() issues two __hci_cmd_sync() calls (HCI_OP_RESET
and Intel exception-info retrieval) without holding
hci_req_sync_lock(). This lets it race against
hci_dev_do_close() -> btintel_shutdown_combined(), which also runs
__hci_cmd_sync() under the same lock. When both paths manipulate
hdev->req_status/req_rsp concurrently, the close path may free the
response skb first, and the still-running hw_error path hits a
slab-use-after-free in kfree_skb().
Wrap the whole recovery sequence in hci_req_sync_lock/unlock so it
is serialized with every other synchronous HCI command issuer.
Below is the data race report and the kasan report:
BUG: data-race in __hci_cmd_sync_sk / btintel_shutdown_combined
read of hdev->req_rsp at net/bluetooth/hci_sync.c:199
by task kworker/u17:1/83:
__hci_cmd_sync_sk+0x12f2/0x1c30 net/bluetooth/hci_sync.c:200
__hci_cmd_sync+0x55/0x80 net/bluetooth/hci_sync.c:223
btintel_hw_error+0x114/0x670 drivers/bluetooth/btintel.c:254
hci_error_reset+0x348/0xa30 net/bluetooth/hci_core.c:1030
write/free by task ioctl/22580:
btintel_shutdown_combined+0xd0/0x360
drivers/bluetooth/btintel.c:3648
hci_dev_close_sync+0x9ae/0x2c10 net/bluetooth/hci_sync.c:5246
hci_dev_do_close+0x232/0x460 net/bluetooth/hci_core.c:526
BUG: KASAN: slab-use-after-free in
sk_skb_reason_drop+0x43/0x380 net/core/skbuff.c:1202
Read of size 4 at addr ffff888144a738dc
by task kworker/u17:1/83:
__hci_cmd_sync_sk+0x12f2/0x1c30 net/bluetooth/hci_sync.c:200
__hci_cmd_sync+0x55/0x80 net/bluetooth/hci_sync.c:223
btintel_hw_error+0x186/0x670 drivers/bluetooth/btintel.c:260
Fixes: 973bb97e5aee ("Bluetooth: btintel: Add generic function for handling hardware errors")
Signed-off-by: Cen Zhang <zzzccc427@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
The adm1177 driver exposes the current alert threshold through
hwmon_curr_max_alarm. This violates the hwmon sysfs ABI, where
*_alarm attributes are read-only status flags and writable thresholds
must use currN_max.
The driver also stores the threshold internally in microamps, while
currN_max is defined in milliamps. Convert the threshold accordingly
on both the read and write paths.
Widen the cached threshold and related calculations to 64 bits so
that small shunt resistor values do not cause truncation or overflow.
Also use 64-bit arithmetic for the mA/uA conversions, clamp writes
to the range the hardware can represent, and propagate failures from
adm1177_write_alert_thr() instead of silently ignoring them.
Update the hwmon documentation to reflect the attribute rename and
the correct units returned by the driver.
Fixes: 09b08ac9e8d5 ("hwmon: (adm1177) Add ADM1177 Hot Swap Controller and Digital Power Monitor driver")
Signed-off-by: Sanman Pradhan <psanman@juniper.net>
Acked-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20260325051246.28262-1-sanman.pradhan@hpe.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
During 3D workload, user is reporting hitting:
[ 413.361679] WARNING: drivers/gpu/drm/xe/xe_vm.c:1217 at vm_bind_ioctl_ops_unwind+0x1e2/0x2e0 [xe], CPU#7: vkd3d_queue/9925
[ 413.361944] CPU: 7 UID: 1000 PID: 9925 Comm: vkd3d_queue Kdump: loaded Not tainted 7.0.0-070000rc3-generic #202603090038 PREEMPT(lazy)
[ 413.361949] RIP: 0010:vm_bind_ioctl_ops_unwind+0x1e2/0x2e0 [xe]
[ 413.362074] RSP: 0018:ffffd4c25c3df930 EFLAGS: 00010282
[ 413.362077] RAX: 0000000000000000 RBX: ffff8f3ee817ed10 RCX: 0000000000000000
[ 413.362078] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
[ 413.362079] RBP: ffffd4c25c3df980 R08: 0000000000000000 R09: 0000000000000000
[ 413.362081] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8f41fbf99380
[ 413.362082] R13: ffff8f3ee817e968 R14: 00000000ffffffef R15: ffff8f43d00bd380
[ 413.362083] FS: 00000001040ff6c0(0000) GS:ffff8f4696d89000(0000) knlGS:00000000330b0000
[ 413.362085] CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033
[ 413.362086] CR2: 00007ddfc4747000 CR3: 00000002e6262005 CR4: 0000000000f72ef0
[ 413.362088] PKRU: 55555554
[ 413.362089] Call Trace:
[ 413.362092] <TASK>
[ 413.362096] xe_vm_bind_ioctl+0xa9a/0xc60 [xe]
Which seems to hint that the vma we are re-inserting for the ops unwind
is either invalid or overlapping with something already inserted in the
vm. It shouldn't be invalid since this is a re-insertion, so must have
worked before. Leaving the likely culprit as something already placed
where we want to insert the vma.
Following from that, for the case where we do something like a rebind in
the middle of a vma, and one or both mapped ends are already compatible,
we skip doing the rebind of those vma and set next/prev to NULL. As well
as then adjust the original unmap va range, to avoid unmapping the ends.
However, if we trigger the unwind path, we end up with three va, with
the two ends never being removed and the original va range in the middle
still being the shrunken size.
If this occurs, one failure mode is when another unwind op needs to
interact with that range, which can happen with a vector of binds. For
example, if we need to re-insert something in place of the original va.
In this case the va is still the shrunken version, so when removing it
and then doing a re-insert it can overlap with the ends, which were
never removed, triggering a warning like above, plus leaving the vm in a
bad state.
With that, we need two things here:
1) Stop nuking the prev/next tracking for the skip cases. Instead
relying on checking for skip prev/next, where needed. That way on the
unwind path, we now correctly remove both ends.
2) Undo the unmap va shrinkage, on the unwind path. With the two ends
now removed the unmap va should expand back to the original size again,
before re-insertion.
v2:
- Update the explanation in the commit message, based on an actual IGT of
triggering this issue, rather than conjecture.
- Also undo the unmap shrinkage, for the skip case. With the two ends
now removed, the original unmap va range should expand back to the
original range.
v3:
- Track the old start/range separately. vma_size/start() uses the va
info directly.
Link: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/7602
Fixes: 8f33b4f054fc ("drm/xe: Avoid doing rebinds")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <stable@vger.kernel.org> # v6.8+
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260318100208.78097-2-matthew.auld@intel.com
(cherry picked from commit aec6969f75afbf4e01fd5fb5850ed3e9c27043ac)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The xarray conversion blindly and wrongly replaced idr_alloc with xa_alloc
and kept the GFP_NOWAIT. It should have been GFP_KERNEL to account for
idr_preload it removed. Fix it.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Fixes: fec2c3c01f1c ("drm/syncobj: Convert syncobj idr to xarray")
Reported-by: Himanshu Girotra <himanshu.girotra@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Himanshu Girotra <himanshu.girotra@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://lore.kernel.org/r/20260324111019.22467-1-tvrtko.ursulin@igalia.com
|
|
If auxiliary_device_add() fails, add_adev() jumps to add_fail and calls
auxiliary_device_uninit(adev).
The auxiliary device has its release callback set to adev_release(),
which frees the containing struct mana_adev. Since adev is embedded in
struct mana_adev, the subsequent fall-through to init_fail and access
to adev->id may result in a use-after-free.
Fix this by saving the allocated auxiliary device id in a local
variable before calling auxiliary_device_add(), and use that saved id
in the cleanup path after auxiliary_device_uninit().
Fixes: a69839d4327d ("net: mana: Add support for auxiliary device")
Cc: stable@vger.kernel.org
Reviewed-by: Long Li <longli@microsoft.com>
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Link: https://patch.msgid.link/20260323165730.945365-1-lgs201920130244@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The driver does not explicitly configure the MAC duplex mode when
bringing the link up. As a result, the MAC may retain a stale duplex
setting from a previous link state, leading to duplex mismatches with
the link partner and degraded network performance.
Update lan743x_phylink_mac_link_up() to set or clear the MAC_CR_DPX_
bit according to the negotiated duplex mode.
This ensures the MAC configuration is consistent with the phylink
resolved state.
Fixes: a5f199a8d8a03 ("net: lan743x: Migrate phylib to phylink")
Signed-off-by: Thangaraj Samynathan <thangaraj.s@microchip.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20260323065345.144915-1-thangaraj.s@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
napi_tx is false
A UAF issue occurs when the virtio_net driver is configured with napi_tx=N
and the device's IFF_XMIT_DST_RELEASE flag is cleared
(e.g., during the configuration of tc route filter rules).
When IFF_XMIT_DST_RELEASE is removed from the net_device, the network stack
expects the driver to hold the reference to skb->dst until the packet
is fully transmitted and freed. In virtio_net with napi_tx=N,
skbs may remain in the virtio transmit ring for an extended period.
If the network namespace is destroyed while these skbs are still pending,
the corresponding dst_ops structure has freed. When a subsequent packet
is transmitted, free_old_xmit() is triggered to clean up old skbs.
It then calls dst_release() on the skb associated with the stale dst_entry.
Since the dst_ops (referenced by the dst_entry) has already been freed,
a UAF kernel paging request occurs.
fix it by adds skb_dst_drop(skb) in start_xmit to explicitly release
the dst reference before the skb is queued in virtio_net.
Call Trace:
Unable to handle kernel paging request at virtual address ffff80007e150000
CPU: 2 UID: 0 PID: 6236 Comm: ping Kdump: loaded Not tainted 7.0.0-rc1+ #6 PREEMPT
...
percpu_counter_add_batch+0x3c/0x158 lib/percpu_counter.c:98 (P)
dst_release+0xe0/0x110 net/core/dst.c:177
skb_release_head_state+0xe8/0x108 net/core/skbuff.c:1177
sk_skb_reason_drop+0x54/0x2d8 net/core/skbuff.c:1255
dev_kfree_skb_any_reason+0x64/0x78 net/core/dev.c:3469
napi_consume_skb+0x1c4/0x3a0 net/core/skbuff.c:1527
__free_old_xmit+0x164/0x230 drivers/net/virtio_net.c:611 [virtio_net]
free_old_xmit drivers/net/virtio_net.c:1081 [virtio_net]
start_xmit+0x7c/0x530 drivers/net/virtio_net.c:3329 [virtio_net]
...
Reproduction Steps:
NETDEV="enp3s0"
config_qdisc_route_filter() {
tc qdisc del dev $NETDEV root
tc qdisc add dev $NETDEV root handle 1: prio
tc filter add dev $NETDEV parent 1:0 \
protocol ip prio 100 route to 100 flowid 1:1
ip route add 192.168.1.100/32 dev $NETDEV realm 100
}
test_ns() {
ip netns add testns
ip link set $NETDEV netns testns
ip netns exec testns ifconfig $NETDEV 10.0.32.46/24
ip netns exec testns ping -c 1 10.0.32.1
ip netns del testns
}
config_qdisc_route_filter
test_ns
sleep 2
test_ns
Fixes: f2fc6a54585a ("[NETNS][IPV6] route6 - move ip6_dst_ops inside the network namespace")
Cc: stable@vger.kernel.org
Signed-off-by: xietangxin <xietangxin@yeah.net>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Fixes: 0287587884b1 ("net: better IFF_XMIT_DST_RELEASE support")
Link: https://patch.msgid.link/20260312025406.15641-1-xietangxin@yeah.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
