summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2024-06-16EDAC/igen6: Convert PCIBIOS_* return codes to errnosIlpo Järvinen1-2/+2
commit f8367a74aebf88dc8b58a0db6a6c90b4cb8fc9d3 upstream. errcmd_enable_error_reporting() uses pci_{read,write}_config_word() that return PCIBIOS_* codes. The return code is then returned all the way into the probe function igen6_probe() that returns it as is. The probe functions, however, should return normal errnos. Convert PCIBIOS_* returns code using pcibios_err_to_errno() into normal errno before returning it from errcmd_enable_error_reporting(). Fixes: 10590a9d4f23 ("EDAC/igen6: Add EDAC driver for Intel client SoCs using IBECC") Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240527132236.13875-2-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-16EDAC/amd64: Convert PCIBIOS_* return codes to errnosIlpo Järvinen1-3/+5
commit 3ec8ebd8a5b782d56347ae884de880af26f93996 upstream. gpu_get_node_map() uses pci_read_config_dword() that returns PCIBIOS_* codes. The return code is then returned all the way into the module init function amd64_edac_init() that returns it as is. The module init functions, however, should return normal errnos. Convert PCIBIOS_* returns code using pcibios_err_to_errno() into normal errno before returning it from gpu_get_node_map(). For consistency, convert also the other similar cases which return PCIBIOS_* codes even if they do not have any bugs at the moment. Fixes: 4251566ebc1c ("EDAC/amd64: Cache and use GPU node map") Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240527132236.13875-1-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-16i3c: master: svc: fix invalidate IBI type and miss call client IBI handlerFrank Li1-3/+13
commit 38baed9b8600008e5d7bc8cb9ceccc1af3dd54b7 upstream. In an In-Band Interrupt (IBI) handle, the code logic is as follows: 1: writel(SVC_I3C_MCTRL_REQUEST_AUTO_IBI | SVC_I3C_MCTRL_IBIRESP_AUTO, master->regs + SVC_I3C_MCTRL); 2: ret = readl_relaxed_poll_timeout(master->regs + SVC_I3C_MSTATUS, val, SVC_I3C_MSTATUS_IBIWON(val), 0, 1000); ... 3: ibitype = SVC_I3C_MSTATUS_IBITYPE(status); ibiaddr = SVC_I3C_MSTATUS_IBIADDR(status); SVC_I3C_MSTATUS_IBIWON may be set before step 1. Thus, step 2 will return immediately, and the I3C controller has not sent out the 9th SCL yet. Consequently, ibitype and ibiaddr are 0, resulting in an unknown IBI type occurrence and missing call I3C client driver's IBI handler. A typical case is that SVC_I3C_MSTATUS_IBIWON is set when an IBI occurs during the controller send start frame in svc_i3c_master_xfer(). Clear SVC_I3C_MSTATUS_IBIWON before issue SVC_I3C_MCTRL_REQUEST_AUTO_IBI to fix this issue. Cc: stable@vger.kernel.org Fixes: 5e5e3c92e748 ("i3c: master: svc: fix wrong data return when IBI happen during start frame") Signed-off-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20240506164009.21375-3-Frank.Li@nxp.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-16s390/ap: Fix crash in AP internal function modify_bitmap()Harald Freudenberger1-1/+1
commit d4f9d5a99a3fd1b1c691b7a1a6f8f3f25f4116c9 upstream. A system crash like this Failing address: 200000cb7df6f000 TEID: 200000cb7df6f403 Fault in home space mode while using kernel ASCE. AS:00000002d71bc007 R3:00000003fe5b8007 S:000000011a446000 P:000000015660c13d Oops: 0038 ilc:3 [#1] PREEMPT SMP Modules linked in: mlx5_ib ... CPU: 8 PID: 7556 Comm: bash Not tainted 6.9.0-rc7 #8 Hardware name: IBM 3931 A01 704 (LPAR) Krnl PSW : 0704e00180000000 0000014b75e7b606 (ap_parse_bitmap_str+0x10e/0x1f8) R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:2 PM:0 RI:0 EA:3 Krnl GPRS: 0000000000000001 ffffffffffffffc0 0000000000000001 00000048f96b75d3 000000cb00000100 ffffffffffffffff ffffffffffffffff 000000cb7df6fce0 000000cb7df6fce0 00000000ffffffff 000000000000002b 00000048ffffffff 000003ff9b2dbc80 200000cb7df6fcd8 0000014bffffffc0 000000cb7df6fbc8 Krnl Code: 0000014b75e7b5fc: a7840047 brc 8,0000014b75e7b68a 0000014b75e7b600: 18b2 lr %r11,%r2 #0000014b75e7b602: a7f4000a brc 15,0000014b75e7b616 >0000014b75e7b606: eb22d00000e6 laog %r2,%r2,0(%r13) 0000014b75e7b60c: a7680001 lhi %r6,1 0000014b75e7b610: 187b lr %r7,%r11 0000014b75e7b612: 84960021 brxh %r9,%r6,0000014b75e7b654 0000014b75e7b616: 18e9 lr %r14,%r9 Call Trace: [<0000014b75e7b606>] ap_parse_bitmap_str+0x10e/0x1f8 ([<0000014b75e7b5dc>] ap_parse_bitmap_str+0xe4/0x1f8) [<0000014b75e7b758>] apmask_store+0x68/0x140 [<0000014b75679196>] kernfs_fop_write_iter+0x14e/0x1e8 [<0000014b75598524>] vfs_write+0x1b4/0x448 [<0000014b7559894c>] ksys_write+0x74/0x100 [<0000014b7618a440>] __do_syscall+0x268/0x328 [<0000014b761a3558>] system_call+0x70/0x98 INFO: lockdep is turned off. Last Breaking-Event-Address: [<0000014b75e7b636>] ap_parse_bitmap_str+0x13e/0x1f8 Kernel panic - not syncing: Fatal exception: panic_on_oops occured when /sys/bus/ap/a[pq]mask was updated with a relative mask value (like +0x10-0x12,+60,-90) with one of the numeric values exceeding INT_MAX. The fix is simple: use unsigned long values for the internal variables. The correct checks are already in place in the function but a simple int for the internal variables was used with the possibility to overflow. Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com> Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Tested-by: Marc Hartmayer <mhartmay@linux.ibm.com> Reviewed-by: Holger Dengler <dengler@linux.ibm.com> Cc: <stable@vger.kernel.org> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-16drm/amdkfd: handle duplicate BOs in reserve_bo_and_cond_vmsLang Yu1-1/+2
commit 2a705f3e49d20b59cd9e5cc3061b2d92ebe1e5f0 upstream. Observed on gfx8 ASIC where KFD_IOC_ALLOC_MEM_FLAGS_AQL_QUEUE_MEM is used. Two attachments use the same VM, root PD would be locked twice. [ 57.910418] Call Trace: [ 57.793726] ? reserve_bo_and_cond_vms+0x111/0x1c0 [amdgpu] [ 57.793820] amdgpu_amdkfd_gpuvm_unmap_memory_from_gpu+0x6c/0x1c0 [amdgpu] [ 57.793923] ? idr_get_next_ul+0xbe/0x100 [ 57.793933] kfd_process_device_free_bos+0x7e/0xf0 [amdgpu] [ 57.794041] kfd_process_wq_release+0x2ae/0x3c0 [amdgpu] [ 57.794141] ? process_scheduled_works+0x29c/0x580 [ 57.794147] process_scheduled_works+0x303/0x580 [ 57.794157] ? __pfx_worker_thread+0x10/0x10 [ 57.794160] worker_thread+0x1a2/0x370 [ 57.794165] ? __pfx_worker_thread+0x10/0x10 [ 57.794167] kthread+0x11b/0x150 [ 57.794172] ? __pfx_kthread+0x10/0x10 [ 57.794177] ret_from_fork+0x3d/0x60 [ 57.794181] ? __pfx_kthread+0x10/0x10 [ 57.794184] ret_from_fork_asm+0x1b/0x30 Signed-off-by: Lang Yu <Lang.Yu@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.6.x only Signed-off-by: Tomáš Trnka <trnka@scm.com> [TT: trivially adjusted for 6.6 which does not have commit 05d249352f (third argument to drm_exec_init removed)] Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-16wifi: ath10k: fix QCOM_RPROC_COMMON dependencyDmitry Baryshkov1-0/+1
commit 21ae74e1bf18331ae5e279bd96304b3630828009 upstream. If ath10k_snoc is built-in, while Qualcomm remoteprocs are built as modules, compilation fails with: /usr/bin/aarch64-linux-gnu-ld: drivers/net/wireless/ath/ath10k/snoc.o: in function `ath10k_modem_init': drivers/net/wireless/ath/ath10k/snoc.c:1534: undefined reference to `qcom_register_ssr_notifier' /usr/bin/aarch64-linux-gnu-ld: drivers/net/wireless/ath/ath10k/snoc.o: in function `ath10k_modem_deinit': drivers/net/wireless/ath/ath10k/snoc.c:1551: undefined reference to `qcom_unregister_ssr_notifier' Add corresponding dependency to ATH10K_SNOC Kconfig entry so that it's built as module if QCOM_RPROC_COMMON is built as module too. Fixes: 747ff7d3d742 ("ath10k: Don't always treat modem stop events as crashes") Cc: stable@vger.kernel.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240511-ath10k-snoc-dep-v1-1-9666e3af5c27@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-16bonding: fix oops during rmmodTony Battersby1-6/+7
commit a45835a0bb6ef7d5ddbc0714dd760de979cb6ece upstream. "rmmod bonding" causes an oops ever since commit cc317ea3d927 ("bonding: remove redundant NULL check in debugfs function"). Here are the relevant functions being called: bonding_exit() bond_destroy_debugfs() debugfs_remove_recursive(bonding_debug_root); bonding_debug_root = NULL; <--------- SET TO NULL HERE bond_netlink_fini() rtnl_link_unregister() __rtnl_link_unregister() unregister_netdevice_many_notify() bond_uninit() bond_debug_unregister() (commit removed check for bonding_debug_root == NULL) debugfs_remove() simple_recursive_removal() down_write() -> OOPS However, reverting the bad commit does not solve the problem completely because the original code contains a race that could cause the same oops, although it was much less likely to be triggered unintentionally: CPU1 rmmod bonding bonding_exit() bond_destroy_debugfs() debugfs_remove_recursive(bonding_debug_root); CPU2 echo -bond0 > /sys/class/net/bonding_masters bond_uninit() bond_debug_unregister() if (!bonding_debug_root) CPU1 bonding_debug_root = NULL; So do NOT revert the bad commit (since the removed checks were racy anyway), and instead change the order of actions taken during module removal. The same oops can also happen if there is an error during module init, so apply the same fix there. Fixes: cc317ea3d927 ("bonding: remove redundant NULL check in debugfs function") Cc: stable@vger.kernel.org Signed-off-by: Tony Battersby <tonyb@cybernetics.com> Reviewed-by: Simon Horman <horms@kernel.org> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Link: https://lore.kernel.org/r/641f914f-3216-4eeb-87dd-91b78aa97773@cybernetics.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-16watchdog: rti_wdt: Set min_hw_heartbeat_ms to accommodate a safety marginJudith Mendez1-19/+15
commit cae58516534e110f4a8558d48aa4435e15519121 upstream. On AM62x, the watchdog is pet before the valid window is open. Fix min_hw_heartbeat and accommodate a 2% + static offset safety margin. The static offset accounts for max hardware error. Remove the hack in the driver which shifts the open window boundary, since it is no longer necessary due to the fix mentioned above. cc: stable@vger.kernel.org Fixes: 5527483f8f7c ("watchdog: rti-wdt: attach to running watchdog during probe") Signed-off-by: Judith Mendez <jm@ti.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20240417205700.3947408-1-jm@ti.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-16intel_th: pci: Add Meteor Lake-S CPU supportAlexander Shishkin1-0/+5
commit a4f813c3ec9d1c32bc402becd1f011b3904dd699 upstream. Add support for the Trace Hub in Meteor Lake-S CPU. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: stable@kernel.org Link: https://lore.kernel.org/r/20240429130119.1518073-15-alexander.shishkin@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-16cpufreq: amd-pstate: Fix the inconsistency in max frequency unitsDhananjay Ugwekar1-1/+1
commit e4731baaf29438508197d3a8a6d4f5a8c51663f8 upstream. The nominal frequency in cpudata is maintained in MHz whereas all other frequencies are in KHz. This means we have to convert nominal frequency value to KHz before we do any interaction with other frequency values. In amd_pstate_set_boost(), this conversion from MHz to KHz is missed, fix that. Tested on a AMD Zen4 EPYC server Before: $ cat /sys/devices/system/cpu/cpufreq/policy*/scaling_max_freq | uniq 2151 $ cat /sys/devices/system/cpu/cpufreq/policy*/cpuinfo_min_freq | uniq 400000 $ cat /sys/devices/system/cpu/cpufreq/policy*/scaling_cur_freq | uniq 2151 409422 After: $ cat /sys/devices/system/cpu/cpufreq/policy*/scaling_max_freq | uniq 2151000 $ cat /sys/devices/system/cpu/cpufreq/policy*/cpuinfo_min_freq | uniq 400000 $ cat /sys/devices/system/cpu/cpufreq/policy*/scaling_cur_freq | uniq 2151000 1799527 Fixes: ec437d71db77 ("cpufreq: amd-pstate: Introduce a new AMD P-State driver to support future processors") Signed-off-by: Dhananjay Ugwekar <Dhananjay.Ugwekar@amd.com> Acked-by: Mario Limonciello <mario.limonciello@amd.com> Acked-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Tested-by: Peter Jung <ptr1337@cachyos.org> Cc: 5.17+ <stable@vger.kernel.org> # 5.17+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-16tpm_tis: Do *not* flush uninitialized workJan Beulich1-1/+2
commit 0ea00e249ca992adee54dc71a526ee70ef109e40 upstream. tpm_tis_core_init() may fail before tpm_tis_probe_irq_single() is called, in which case tpm_tis_remove() unconditionally calling flush_work() is triggering a warning for .func still being NULL. Cc: stable@vger.kernel.org # v6.5+ Fixes: 481c2d14627d ("tpm,tpm_tis: Disable interrupts after 1000 unhandled IRQs") Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-16scsi: core: Handle devices which return an unusually large VPD page countMartin K. Petersen1-0/+7
commit d09c05aa35909adb7d29f92f0cd79fdcd1338ef0 upstream. Peter Schneider reported that a system would no longer boot after updating to 6.8.4. Peter bisected the issue and identified commit b5fc07a5fb56 ("scsi: core: Consult supported VPD page list prior to fetching page") as being the culprit. Turns out the enclosure device in Peter's system reports a byteswapped page length for VPD page 0. It reports "02 00" as page length instead of "00 02". This causes us to attempt to access 516 bytes (page length + header) of information despite only 2 pages being present. Limit the page search scope to the size of our VPD buffer to guard against devices returning a larger page count than requested. Link: https://lore.kernel.org/r/20240521023040.2703884-1-martin.petersen@oracle.com Fixes: b5fc07a5fb56 ("scsi: core: Consult supported VPD page list prior to fetching page") Cc: stable@vger.kernel.org Reported-by: Peter Schneider <pschneider1968@googlemail.com> Closes: https://lore.kernel.org/all/eec6ebbf-061b-4a7b-96dc-ea748aa4d035@googlemail.com/ Tested-by: Peter Schneider <pschneider1968@googlemail.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-16HID: i2c-hid: elan: fix reset suspend current leakageJohan Hovold1-12/+47
commit 0eafc58f2194dbd01d4be40f99a697681171995b upstream. The Elan eKTH5015M touch controller found on the Lenovo ThinkPad X13s shares the VCC33 supply with other peripherals that may remain powered during suspend (e.g. when enabled as wakeup sources). The reset line is also wired so that it can be left deasserted when the supply is off. This is important as it avoids holding the controller in reset for extended periods of time when it remains powered, which can lead to increased power consumption, and also avoids leaking current through the X13s reset circuitry during suspend (and after driver unbind). Use the new 'no-reset-on-power-off' devicetree property to determine when reset needs to be asserted on power down. Notably this also avoids wasting power on machine variants without a touchscreen for which the driver would otherwise exit probe with reset asserted. Fixes: bd3cba00dcc6 ("HID: i2c-hid: elan: Add support for Elan eKTH6915 i2c-hid touchscreens") Cc: <stable@vger.kernel.org> # 6.0 Cc: Douglas Anderson <dianders@chromium.org> Tested-by: Steev Klimaszewski <steev@kali.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20240507144821.12275-5-johan+linaro@kernel.org Signed-off-by: Benjamin Tissoires <bentiss@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-16i2c: acpi: Unbind mux adapters before deleteHamish Martin1-4/+15
commit 3f858bbf04dbac934ac279aaee05d49eb9910051 upstream. There is an issue with ACPI overlay table removal specifically related to I2C multiplexers. Consider an ACPI SSDT Overlay that defines a PCA9548 I2C mux on an existing I2C bus. When this table is loaded we see the creation of a device for the overall PCA9548 chip and 8 further devices - one i2c_adapter each for the mux channels. These are all bound to their ACPI equivalents via an eventual invocation of acpi_bind_one(). When we unload the SSDT overlay we run into the problem. The ACPI devices are deleted as normal via acpi_device_del_work_fn() and the acpi_device_del_list. However, the following warning and stack trace is output as the deletion does not go smoothly: ------------[ cut here ]------------ kernfs: can not remove 'physical_node', no directory WARNING: CPU: 1 PID: 11 at fs/kernfs/dir.c:1674 kernfs_remove_by_name_ns+0xb9/0xc0 Modules linked in: CPU: 1 PID: 11 Comm: kworker/u128:0 Not tainted 6.8.0-rc6+ #1 Hardware name: congatec AG conga-B7E3/conga-B7E3, BIOS 5.13 05/16/2023 Workqueue: kacpi_hotplug acpi_device_del_work_fn RIP: 0010:kernfs_remove_by_name_ns+0xb9/0xc0 Code: e4 00 48 89 ef e8 07 71 db ff 5b b8 fe ff ff ff 5d 41 5c 41 5d e9 a7 55 e4 00 0f 0b eb a6 48 c7 c7 f0 38 0d 9d e8 97 0a d5 ff <0f> 0b eb dc 0f 1f 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 RSP: 0018:ffff9f864008fb28 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff8ef90a8d4940 RCX: 0000000000000000 RDX: ffff8f000e267d10 RSI: ffff8f000e25c780 RDI: ffff8f000e25c780 RBP: ffff8ef9186f9870 R08: 0000000000013ffb R09: 00000000ffffbfff R10: 00000000ffffbfff R11: ffff8f000e0a0000 R12: ffff9f864008fb50 R13: ffff8ef90c93dd60 R14: ffff8ef9010d0958 R15: ffff8ef9186f98c8 FS: 0000000000000000(0000) GS:ffff8f000e240000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f48f5253a08 CR3: 00000003cb82e000 CR4: 00000000003506f0 Call Trace: <TASK> ? kernfs_remove_by_name_ns+0xb9/0xc0 ? __warn+0x7c/0x130 ? kernfs_remove_by_name_ns+0xb9/0xc0 ? report_bug+0x171/0x1a0 ? handle_bug+0x3c/0x70 ? exc_invalid_op+0x17/0x70 ? asm_exc_invalid_op+0x1a/0x20 ? kernfs_remove_by_name_ns+0xb9/0xc0 ? kernfs_remove_by_name_ns+0xb9/0xc0 acpi_unbind_one+0x108/0x180 device_del+0x18b/0x490 ? srso_return_thunk+0x5/0x5f ? srso_return_thunk+0x5/0x5f device_unregister+0xd/0x30 i2c_del_adapter.part.0+0x1bf/0x250 i2c_mux_del_adapters+0xa1/0xe0 i2c_device_remove+0x1e/0x80 device_release_driver_internal+0x19a/0x200 bus_remove_device+0xbf/0x100 device_del+0x157/0x490 ? __pfx_device_match_fwnode+0x10/0x10 ? srso_return_thunk+0x5/0x5f device_unregister+0xd/0x30 i2c_acpi_notify+0x10f/0x140 notifier_call_chain+0x58/0xd0 blocking_notifier_call_chain+0x3a/0x60 acpi_device_del_work_fn+0x85/0x1d0 process_one_work+0x134/0x2f0 worker_thread+0x2f0/0x410 ? __pfx_worker_thread+0x10/0x10 kthread+0xe3/0x110 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2f/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK> ---[ end trace 0000000000000000 ]--- ... repeated 7 more times, 1 for each channel of the mux ... The issue is that the binding of the ACPI devices to their peer I2C adapters is not correctly cleaned up. Digging deeper into the issue we see that the deletion order is such that the ACPI devices matching the mux channel i2c adapters are deleted first during the SSDT overlay removal. For each of the channels we see a call to i2c_acpi_notify() with ACPI_RECONFIG_DEVICE_REMOVE but, because these devices are not actually i2c_clients, nothing is done for them. Later on, after each of the mux channels has been dealt with, we come to delete the i2c_client representing the PCA9548 device. This is the call stack we see above, whereby the kernel cleans up the i2c_client including destruction of the mux and its channel adapters. At this point we do attempt to unbind from the ACPI peers but those peers no longer exist and so we hit the kernfs errors. The fix is to augment i2c_acpi_notify() to handle i2c_adapters. But, given that the life cycle of the adapters is linked to the i2c_client, instead of deleting the i2c_adapters during the i2c_acpi_notify(), we just trigger unbinding of the ACPI device from the adapter device, and allow the clean up of the adapter to continue in the way it always has. Signed-off-by: Hamish Martin <hamish.martin@alliedtelesis.co.nz> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Fixes: 525e6fabeae2 ("i2c / ACPI: add support for ACPI reconfigure notifications") Cc: <stable@vger.kernel.org> # v4.8+ Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-16crypto: qat - Fix ADF_DEV_RESET_SYNC memory leakHerbert Xu1-14/+5
commit d3b17c6d9dddc2db3670bc9be628b122416a3d26 upstream. Using completion_done to determine whether the caller has gone away only works after a complete call. Furthermore it's still possible that the caller has not yet called wait_for_completion, resulting in another potential UAF. Fix this by making the caller use cancel_work_sync and then freeing the memory safely. Fixes: 7d42e097607c ("crypto: qat - resolve race condition during AER recovery") Cc: <stable@vger.kernel.org> #6.8+ Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-16clk: qcom: clk-alpha-pll: fix rate setting for Stromer PLLsGabor Juhos1-0/+2
commit 3c5b3e17b8fd1f1add5a9477306c355fab126977 upstream. The clk_alpha_pll_stromer_set_rate() function writes inproper values into the ALPHA_VAL{,_U} registers which results in wrong clock rates when the alpha value is used. The broken behaviour can be seen on IPQ5018 for example, when dynamic scaling sets the CPU frequency to 800000 KHz. In this case the CPU cores are running only at 792031 KHz: # cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq 800000 # cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq 792031 This happens because the function ignores the fact that the alpha value calculated by the alpha_pll_round_rate() function is only 32 bits wide which must be extended to 40 bits if it is used on a hardware which supports 40 bits wide values. Extend the clk_alpha_pll_stromer_set_rate() function to convert the alpha value to 40 bits before wrinting that into the registers in order to ensure that the hardware really uses the requested rate. After the change the CPU frequency is correct: # cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq 800000 # cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq 800000 Cc: stable@vger.kernel.org Fixes: e47a4f55f240 ("clk: qcom: clk-alpha-pll: Add support for Stromer PLLs") Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Gabor Juhos <j4g8y7@gmail.com> Link: https://lore.kernel.org/r/20240328-alpha-pll-fix-stromer-set-rate-v3-1-1b79714c78bc@gmail.com Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-16clk: bcm: rpi: Assign ->num before accessing ->hwsNathan Chancellor1-1/+1
commit 6dc445c1905096b2ed4db1a84570375b4e00cc0f upstream. Commit f316cdff8d67 ("clk: Annotate struct clk_hw_onecell_data with __counted_by") annotated the hws member of 'struct clk_hw_onecell_data' with __counted_by, which informs the bounds sanitizer about the number of elements in hws, so that it can warn when hws is accessed out of bounds. As noted in that change, the __counted_by member must be initialized with the number of elements before the first array access happens, otherwise there will be a warning from each access prior to the initialization because the number of elements is zero. This occurs in raspberrypi_discover_clocks() due to ->num being assigned after ->hws has been accessed: UBSAN: array-index-out-of-bounds in drivers/clk/bcm/clk-raspberrypi.c:374:4 index 3 is out of range for type 'struct clk_hw *[] __counted_by(num)' (aka 'struct clk_hw *[]') Move the ->num initialization to before the first access of ->hws, which clears up the warning. Cc: stable@vger.kernel.org Fixes: f316cdff8d67 ("clk: Annotate struct clk_hw_onecell_data with __counted_by") Signed-off-by: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/r/20240425-cbl-bcm-assign-counted-by-val-before-access-v1-2-e2db3b82d5ef@kernel.org Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-16clk: bcm: dvp: Assign ->num before accessing ->hwsNathan Chancellor1-1/+2
commit 9368cdf90f52a68120d039887ccff74ff33b4444 upstream. Commit f316cdff8d67 ("clk: Annotate struct clk_hw_onecell_data with __counted_by") annotated the hws member of 'struct clk_hw_onecell_data' with __counted_by, which informs the bounds sanitizer about the number of elements in hws, so that it can warn when hws is accessed out of bounds. As noted in that change, the __counted_by member must be initialized with the number of elements before the first array access happens, otherwise there will be a warning from each access prior to the initialization because the number of elements is zero. This occurs in clk_dvp_probe() due to ->num being assigned after ->hws has been accessed: UBSAN: array-index-out-of-bounds in drivers/clk/bcm/clk-bcm2711-dvp.c:59:2 index 0 is out of range for type 'struct clk_hw *[] __counted_by(num)' (aka 'struct clk_hw *[]') Move the ->num initialization to before the first access of ->hws, which clears up the warning. Cc: stable@vger.kernel.org Fixes: f316cdff8d67 ("clk: Annotate struct clk_hw_onecell_data with __counted_by") Signed-off-by: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/r/20240425-cbl-bcm-assign-counted-by-val-before-access-v1-1-e2db3b82d5ef@kernel.org Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-16Revert "drm/amdkfd: fix gfx_target_version for certain 11.0.3 devices"Alex Deucher1-9/+2
commit dd2b75fd9a79bf418e088656822af06fc253dbe3 upstream. This reverts commit 28ebbb4981cb1fad12e0b1227dbecc88810b1ee8. Revert this commit as apparently the LLVM code to take advantage of this never landed. Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: Feifei Xu <feifei.xu@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-16drm/amd: Fix shutdown (again) on some SMU v13.0.4/11 platformsMario Limonciello1-9/+11
commit 267cace556e8a53d703119f7435ab556209e5b6a upstream. commit cd94d1b182d2 ("dm/amd/pm: Fix problems with reboot/shutdown for some SMU 13.0.4/13.0.11 users") attempted to fix shutdown issues that were reported since commit 31729e8c21ec ("drm/amd/pm: fixes a random hang in S4 for SMU v13.0.4/11") but caused issues for some people. Adjust the workaround flow to properly only apply in the S4 case: -> For shutdown go through SMU_MSG_PrepareMp1ForUnload -> For S4 go through SMU_MSG_GfxDeviceDriverReset and SMU_MSG_PrepareMp1ForUnload Reported-and-tested-by: lectrode <electrodexsnet@gmail.com> Closes: https://github.com/void-linux/void-packages/issues/50417 Cc: stable@vger.kernel.org Fixes: cd94d1b182d2 ("dm/amd/pm: Fix problems with reboot/shutdown for some SMU 13.0.4/13.0.11 users") Reviewed-by: Tim Huang <Tim.Huang@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-16drm/amdgpu/atomfirmware: add intergrated info v2.3 tableLi Ma2-0/+58
commit e64e8f7c178e5228e0b2dbb504b9dc75953a319f upstream. [Why] The vram width value is 0. Because the integratedsysteminfo table in VBIOS has updated to 2.3. [How] Driver needs a new intergrated info v2.3 table too. Then the vram width value will be correct. Signed-off-by: Li Ma <li.ma@amd.com> Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-16fbdev: savage: Handle err return when savagefb_check_var failedCai Xinchen1-1/+4
commit 6ad959b6703e2c4c5d7af03b4cfd5ff608036339 upstream. The commit 04e5eac8f3ab("fbdev: savage: Error out if pixclock equals zero") checks the value of pixclock to avoid divide-by-zero error. However the function savagefb_probe doesn't handle the error return of savagefb_check_var. When pixclock is 0, it will cause divide-by-zero error. Fixes: 04e5eac8f3ab ("fbdev: savage: Error out if pixclock equals zero") Signed-off-by: Cai Xinchen <caixinchen1@huawei.com> Cc: stable@vger.kernel.org Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-16drm/fbdev-generic: Do not set physical framebuffer addressThomas Zimmermann1-1/+0
commit 87cb4a612a89690b123e68f6602d9f6581b03597 upstream. Framebuffer memory is allocated via vzalloc() from non-contiguous physical pages. The physical framebuffer start address is therefore meaningless. Do not set it. The value is not used within the kernel and only exported to userspace on dedicated ARM configs. No functional change is expected. v2: - refer to vzalloc() in commit message (Javier) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Fixes: a5b44c4adb16 ("drm/fbdev-generic: Always use shadow buffering") Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Javier Martinez Canillas <javierm@redhat.com> Cc: Zack Rusin <zackr@vmware.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: <stable@vger.kernel.org> # v6.4+ Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Zack Rusin <zack.rusin@broadcom.com> Reviewed-by: Sui Jingfeng <sui.jingfeng@linux.dev> Tested-by: Sui Jingfeng <sui.jingfeng@linux.dev> Acked-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240419083331.7761-2-tzimmermann@suse.de (cherry picked from commit 73ef0aecba78aa9ebd309b10b6cd17d94e632892) Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-16mmc: sdhci-acpi: Add quirk to enable pull-up on the card-detect GPIO on Asus ↵Hans de Goede1-0/+13
T100TA commit 431946c0f640c93421439a6c928efb3152c035a4 upstream. The card-detect GPIO for the microSD slot on Asus T100TA / T100TAM models stopped working under Linux after commit 6fd03f024828 ("gpiolib: acpi: support bias pull disable"). The GPIO in question is connected to a mechanical switch in the slot which shorts the pin to GND when a card is inserted. The GPIO pin correctly gets configured with a 20K pull-up by the BIOS, but there is a bug in the DSDT where the GpioInt for the card-detect is configured with a PullNone setting: GpioInt (Edge, ActiveBoth, SharedAndWake, PullNone, 0x2710, "\\_SB.GPO0", 0x00, ResourceConsumer, , ) { // Pin list 0x0026 } Linux now actually honors the PullNone setting and disables the 20K pull-up configured by the BIOS. Add a new DMI_QUIRK_SD_CD_ENABLE_PULL_UP quirk which when set calls mmc_gpiod_set_cd_config() to re-enable the pull-up and set this for the Asus T100TA models to fix this. Fixes: 6fd03f024828 ("gpiolib: acpi: support bias pull disable") Reviewed-by: Andy Shevchenko <andy@kernel.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240410191639.526324-7-hdegoede@redhat.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-16mmc: sdhci-acpi: Disable write protect detection on Toshiba WT10-AHans de Goede1-0/+11
commit ef3eab75e17191e5665f52e64e85bc29d5705a7b upstream. On the Toshiba WT10-A the microSD slot always reports the card being write-protected, just like on the Toshiba WT8-B. Add a DMI quirk to work around this. Reviewed-by: Andy Shevchenko <andy@kernel.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240410191639.526324-6-hdegoede@redhat.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-16mmc: sdhci-acpi: Fix Lenovo Yoga Tablet 2 Pro 1380 sdcard slot not workingHans de Goede1-0/+24
commit f3521d7cbaefff19cc656325787ed797e5f6a955 upstream. The Lenovo Yoga Tablet 2 Pro 1380 sdcard slot has an active high cd pin and a broken wp pin which always reports the card being write-protected. Add a DMI quirk to address both issues. Reviewed-by: Andy Shevchenko <andy@kernel.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240410191639.526324-5-hdegoede@redhat.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-16mmc: sdhci-acpi: Sort DMI quirks alphabeticallyHans de Goede1-12/+13
commit a92a73b1d9249d155412d8ac237142fa716803ea upstream. Sort the DMI quirks alphabetically. Reviewed-by: Andy Shevchenko <andy@kernel.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240410191639.526324-4-hdegoede@redhat.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-16mmc: sdhci: Add support for "Tuning Error" interruptsAdrian Hunter2-3/+10
commit b3855668d98cf9c6aec2db999dd27d872f8ba878 upstream. Most Bay Trail devices do not enable UHS modes for the external sdcard slot the Lenovo Yoga Tablet 2 830 / 1050 and Lenovo Yoga Tablet 2 Pro 1380 (8", 10" and 13") models however do enable this. Using a UHS cards in these tablets results in errors like this one: [ 225.272001] mmc2: Unexpected interrupt 0x04000000. [ 225.272024] mmc2: sdhci: ============ SDHCI REGISTER DUMP =========== [ 225.272034] mmc2: sdhci: Sys addr: 0x0712c400 | Version: 0x0000b502 [ 225.272044] mmc2: sdhci: Blk size: 0x00007200 | Blk cnt: 0x00000007 [ 225.272054] mmc2: sdhci: Argument: 0x00000000 | Trn mode: 0x00000023 [ 225.272064] mmc2: sdhci: Present: 0x01e20002 | Host ctl: 0x00000016 [ 225.272073] mmc2: sdhci: Power: 0x0000000f | Blk gap: 0x00000000 [ 225.272082] mmc2: sdhci: Wake-up: 0x00000000 | Clock: 0x00000107 [ 225.272092] mmc2: sdhci: Timeout: 0x0000000e | Int stat: 0x00000001 [ 225.272101] mmc2: sdhci: Int enab: 0x03ff000b | Sig enab: 0x03ff000b [ 225.272110] mmc2: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00000001 [ 225.272119] mmc2: sdhci: Caps: 0x076864b2 | Caps_1: 0x00000004 [ 225.272129] mmc2: sdhci: Cmd: 0x00000c1b | Max curr: 0x00000000 [ 225.272138] mmc2: sdhci: Resp[0]: 0x00000c00 | Resp[1]: 0x00000000 [ 225.272147] mmc2: sdhci: Resp[2]: 0x00000000 | Resp[3]: 0x00000900 [ 225.272155] mmc2: sdhci: Host ctl2: 0x0000000c [ 225.272164] mmc2: sdhci: ADMA Err: 0x00000003 | ADMA Ptr: 0x0712c200 [ 225.272172] mmc2: sdhci: ============================================ which results in IO errors leading to issues accessing the sdcard. 0x04000000 is a so-called "Tuning Error" which sofar the SDHCI driver does not support / enable. Modify the IRQ handler to process these. This fixes UHS microsd cards not working with these tablets. Link: https://lore.kernel.org/r/199bb4aa-c6b5-453e-be37-58bbf468800c@intel.com Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240410191639.526324-3-hdegoede@redhat.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-16mmc: core: Add mmc_gpiod_set_cd_config() functionHans de Goede1-0/+20
commit 63a7cd660246aa36af263b85c33ecc6601bf04be upstream. Some mmc host drivers may need to fixup a card-detection GPIO's config to e.g. enable the GPIO controllers builtin pull-up resistor on devices where the firmware description of the GPIO is broken (e.g. GpioInt with PullNone instead of PullUp in ACPI DSDT). Since this is the exception rather then the rule adding a config parameter to mmc_gpiod_request_cd() seems undesirable, so instead add a new mmc_gpiod_set_cd_config() function. This is simply a wrapper to call gpiod_set_config() on the card-detect GPIO acquired through mmc_gpiod_request_cd(). Reviewed-by: Andy Shevchenko <andy@kernel.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240410191639.526324-2-hdegoede@redhat.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-16mmc: davinci: Don't strip remove function when driver is builtinUwe Kleine-König1-2/+2
commit 55c421b364482b61c4c45313a535e61ed5ae4ea3 upstream. Using __exit for the remove function results in the remove callback being discarded with CONFIG_MMC_DAVINCI=y. When such a device gets unbound (e.g. using sysfs or hotplug), the driver is just removed without the cleanup being performed. This results in resource leaks. Fix it by compiling in the remove callback unconditionally. This also fixes a W=1 modpost warning: WARNING: modpost: drivers/mmc/host/davinci_mmc: section mismatch in reference: davinci_mmcsd_driver+0x10 (section: .data) -> davinci_mmcsd_remove (section: .exit.text) Fixes: b4cff4549b7a ("DaVinci: MMC: MMC/SD controller driver for DaVinci family") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240324114017.231936-2-u.kleine-koenig@pengutronix.de Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-16media: v4l: async: Fix notifier list entry initAlexander Stein1-0/+2
commit 6d8acd02c4c6a8f917eefac1de2e035521ca119d upstream. struct v4l2_async_notifier has several list_head members, but only waiting_list and done_list are initialized. notifier_entry was kept 'zeroed' leading to an uninitialized list_head. This results in a NULL-pointer dereference if csi2_async_register() fails, e.g. node for remote endpoint is disabled, and returns -ENOTCONN. The following calls to v4l2_async_nf_unregister() results in a NULL pointer dereference. Add the missing list head initializer. Fixes: b8ec754ae4c5 ("media: v4l: async: Set v4l2_device and subdev in async notifier init") Cc: <stable@vger.kernel.org> # for 6.6 and later Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-16media: v4l: async: Don't set notifier's V4L2 device if registering failsSakari Ailus1-7/+1
commit 46bc0234ad38063ce550ecf135c1a52458f0a804 upstream. The V4L2 device used to be set when the notifier was registered but this has been moved to the notifier initialisation. Don't touch the V4L2 device if registration fails. Fixes: b8ec754ae4c5 ("media: v4l: async: Set v4l2_device and subdev in async notifier init") Cc: <stable@vger.kernel.org> # for 6.6 and later Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-16media: v4l: async: Properly re-initialise notifier entry in unregisterSakari Ailus1-1/+1
commit 9537a8425a7a0222999d5839a0b394b1e8834b4a upstream. The notifier_entry of a notifier is not re-initialised after unregistering the notifier. This leads to dangling pointers being left there so use list_del_init() to return the notifier_entry an empty list. Fixes: b8ec754ae4c5 ("media: v4l: async: Set v4l2_device and subdev in async notifier init") Cc: <stable@vger.kernel.org> # for 6.6 and later Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-16media: v4l2-core: hold videodev_lock until dev reg, finishesHans Verkuil1-0/+3
commit 1ed4477f2ea4743e7c5e1f9f3722152d14e6eeb1 upstream. After the new V4L2 device node was registered, some additional initialization was done before the device node was marked as 'registered'. During the time between creating the device node and marking it as 'registered' it was possible to open the device node, which would return -ENODEV since the 'registered' flag was not yet set. Hold the videodev_lock mutex from just before the device node is registered until the 'registered' flag is set. Since v4l2_open will take the same lock, it will wait until this registration process is finished. This resolves this race condition. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com> Cc: <stable@vger.kernel.org> # for vi4.18 and up Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-16media: mxl5xx: Move xpt structures off stackNathan Chancellor1-11/+11
commit 526f4527545b2d4ce0733733929fac7b6da09ac6 upstream. When building for LoongArch with clang 18.0.0, the stack usage of probe() is larger than the allowed 2048 bytes: drivers/media/dvb-frontends/mxl5xx.c:1698:12: warning: stack frame size (2368) exceeds limit (2048) in 'probe' [-Wframe-larger-than] 1698 | static int probe(struct mxl *state, struct mxl5xx_cfg *cfg) | ^ 1 warning generated. This is the result of the linked LLVM commit, which changes how the arrays of structures in config_ts() get handled with CONFIG_INIT_STACK_ZERO and CONFIG_INIT_STACK_PATTERN, which causes the above warning in combination with inlining, as config_ts() gets inlined into probe(). This warning can be easily fixed by moving the array of structures off of the stackvia 'static const', which is a better location for these variables anyways because they are static data that is only ever read from, never modified, so allocating the stack space is wasteful. This drops the stack usage from 2368 bytes to 256 bytes with the same compiler and configuration. Link: https://lore.kernel.org/linux-media/20240111-dvb-mxl5xx-move-structs-off-stack-v1-1-ca4230e67c11@kernel.org Cc: stable@vger.kernel.org Closes: https://github.com/ClangBuiltLinux/linux/issues/1977 Link: https://github.com/llvm/llvm-project/commit/afe8b93ffdfef5d8879e1894b9d7dda40dee2b8d Signed-off-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Miguel Ojeda <ojeda@kernel.org> Tested-by: Miguel Ojeda <ojeda@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-16media: mc: mark the media devnode as registered from the, startHans Verkuil1-3/+2
commit 4bc60736154bc9e0e39d3b88918f5d3762ebe5e0 upstream. First the media device node was created, and if successful it was marked as 'registered'. This leaves a small race condition where an application can open the device node and get an error back because the 'registered' flag was not yet set. Change the order: first set the 'registered' flag, then actually register the media device node. If that fails, then clear the flag. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Fixes: cf4b9211b568 ("[media] media: Media device node support") Cc: stable@vger.kernel.org Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-16media: mc: Fix graph walk in media_pipeline_startTomi Valkeinen1-0/+6
commit 8a9d420149c477e7c97fbd6453704e4612bdd3fa upstream. The graph walk tries to follow all links, even if they are not between pads. This causes a crash with, e.g. a MEDIA_LNK_FL_ANCILLARY_LINK link. Fix this by allowing the walk to proceed only for MEDIA_LNK_FL_DATA_LINK links. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Cc: stable@vger.kernel.org # for 6.1 and later Fixes: ae219872834a ("media: mc: entity: Rewrite media_pipeline_start()") Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-16wifi: rtlwifi: rtl8192de: Fix endianness issue in RX pathBitterblue Smith2-66/+15
commit 2f228d364da95ab58f63a3fedc00d5b2b7db16ab upstream. Structs rx_desc_92d and rx_fwinfo_92d will not work for big endian systems. Delete rx_desc_92d because it's big and barely used, and instead use the get_rx_desc_rxmcs and get_rx_desc_rxht functions, which work on big endian systems too. Fix rx_fwinfo_92d by duplicating four of its members in the correct order. Tested only with RTL8192DU, which will use the same code. Tested only on a little endian system. Cc: stable@vger.kernel.org Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://msgid.link/698463da-5ef1-40c7-b744-fa51ad847caf@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-16wifi: rtlwifi: rtl8192de: Fix low speed with WPA3-SAEBitterblue Smith2-3/+16
commit a7c0f48410f546772ac94a0f7b7291a15c4fc173 upstream. Some (all?) management frames are incorrectly reported to mac80211 as decrypted when actually the hardware did not decrypt them. This results in speeds 3-5 times lower than expected, 20-30 Mbps instead of 100 Mbps. Fix this by checking the encryption type field of the RX descriptor. rtw88 does the same thing. This fix was tested only with rtl8192du, which will use the same code. Cc: stable@vger.kernel.org Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://msgid.link/4d600435-f0ea-46b0-bdb4-e60f173da8dd@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-16wifi: rtlwifi: rtl8192de: Fix 5 GHz TX powerBitterblue Smith1-2/+2
commit de4d4be4fa64ed7b4aa1c613061015bd8fa98b24 upstream. Different channels have different TX power settings. rtl8192de is using the TX power setting from the wrong channel in the 5 GHz band because _rtl92c_phy_get_rightchnlplace expects an array which includes all the channel numbers, but it's using an array which includes only the 5 GHz channel numbers. Use the array channel_all (defined in rtl8192de/phy.c) instead of the incorrect channel5g (defined in core.c). Tested only with rtl8192du, which will use the same TX power code. Cc: stable@vger.kernel.org Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://msgid.link/c7653517-cf88-4f57-b79a-8edb0a8b32f0@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-16wifi: rtl8xxxu: Fix the TX power of RTL8192CU, RTL8723AUBitterblue Smith1-15/+10
commit 08b5d052d17a89bb8706b2888277d0b682dc1610 upstream. Don't subtract 1 from the power index. This was added in commit 2fc0b8e5a17d ("rtl8xxxu: Add TX power base values for gen1 parts") for unknown reasons. The vendor drivers don't do this. Also correct the calculations of values written to REG_OFDM0_X{C,D}_TX_IQ_IMBALANCE. According to the vendor driver, these are used for TX power training. With these changes rtl8xxxu sets the TX power of RTL8192CU the same as the vendor driver. None of this appears to have any effect on my RTL8192CU device. Cc: stable@vger.kernel.org Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://msgid.link/6ae5945b-644e-45e4-a78f-4c7d9c987910@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-16wifi: rtw89: pci: correct TX resource checking for PCI DMA channel of ↵Ping-Ke Shih1-1/+2
firmware command commit c6330b129786e267b14129335a08fa7c331c308d upstream. The DMA channel of firmware command doesn't use TX WD (WiFi descriptor), so don't need to consider number of TX WD as factor of TX resource. Otherwise, during pause state (a transient state to switch to/from low power mode) firmware commands could be dropped and driver throws warnings suddenly: rtw89_8852ce 0000:04:00.0: no tx fwcmd resource rtw89_8852ce 0000:04:00.0: failed to send h2c The case we met is that driver sends RSSI strength of firmware command at RX path that could be running concurrently with switching low power mode. The missing of this firmware command doesn't affect user experiences, because the RSSI strength will be updated again after a while. The DMA descriptors of normal packets has three layers like: +-------+ | TX BD | (*n elements) +-------+ | | +-------+ +-> | TX WD | (*m elements) +-------+ | | +--------+ +-> | SKB | +--------+ And, firmware command queue (TXCH 12) is a special queue that has only two layers: +-------+ | TX BD | (*n elements) +-------+ | | +------------------+ +-> | firmware command | +------------------+ Fixes: 4a29213cd775 ("wifi: rtw89: pci: correct TX resource checking in low power mode") Cc: stable@vger.kernel.org Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://msgid.link/20240410011316.9906-1-pkshih@realtek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-16md/raid5: fix deadlock that raid5d() wait for itself to clear ↵Yu Kuai1-12/+3
MD_SB_CHANGE_PENDING commit 151f66bb618d1fd0eeb84acb61b4a9fa5d8bb0fa upstream. Xiao reported that lvm2 test lvconvert-raid-takeover.sh can hang with small possibility, the root cause is exactly the same as commit bed9e27baf52 ("Revert "md/raid5: Wait for MD_SB_CHANGE_PENDING in raid5d"") However, Dan reported another hang after that, and junxiao investigated the problem and found out that this is caused by plugged bio can't issue from raid5d(). Current implementation in raid5d() has a weird dependence: 1) md_check_recovery() from raid5d() must hold 'reconfig_mutex' to clear MD_SB_CHANGE_PENDING; 2) raid5d() handles IO in a deadloop, until all IO are issued; 3) IO from raid5d() must wait for MD_SB_CHANGE_PENDING to be cleared; This behaviour is introduce before v2.6, and for consequence, if other context hold 'reconfig_mutex', and md_check_recovery() can't update super_block, then raid5d() will waste one cpu 100% by the deadloop, until 'reconfig_mutex' is released. Refer to the implementation from raid1 and raid10, fix this problem by skipping issue IO if MD_SB_CHANGE_PENDING is still set after md_check_recovery(), daemon thread will be woken up when 'reconfig_mutex' is released. Meanwhile, the hang problem will be fixed as well. Fixes: 5e2cf333b7bd ("md/raid5: Wait for MD_SB_CHANGE_PENDING in raid5d") Cc: stable@vger.kernel.org # v5.19+ Reported-and-tested-by: Dan Moulding <dan@danm.net> Closes: https://lore.kernel.org/all/20240123005700.9302-1-dan@danm.net/ Investigated-by: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Yu Kuai <yukuai3@huawei.com> Link: https://lore.kernel.org/r/20240322081005.1112401-1-yukuai1@huaweicloud.com Signed-off-by: Song Liu <song@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-16ACPI: resource: Do IRQ override on TongFang GXxHRXx and GMxHGxxChristoffer Sandberg1-0/+12
commit c81bf14f9db68311c2e75428eea070d97d603975 upstream. Listed devices need the override for the keyboard to work. Signed-off-by: Christoffer Sandberg <cs@tuxedo.de> Signed-off-by: Werner Sembach <wse@tuxedocomputers.com> Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-16soc: qcom: rpmh-rsc: Enhance check for VRM in-flight requestMaulik Shah2-2/+33
commit f592cc5794747b81e53b53dd6e80219ee25f0611 upstream. Each RPMh VRM accelerator resource has 3 or 4 contiguous 4-byte aligned addresses associated with it. These control voltage, enable state, mode, and in legacy targets, voltage headroom. The current in-flight request checking logic looks for exact address matches. Requests for different addresses of the same RPMh resource as thus not detected as in-flight. Add new cmd-db API cmd_db_match_resource_addr() to enhance the in-flight request check for VRM requests by ignoring the address offset. This ensures that only one request is allowed to be in-flight for a given VRM resource. This is needed to avoid scenarios where request commands are carried out by RPMh hardware out-of-order leading to LDO regulator over-current protection triggering. Fixes: 658628e7ef78 ("drivers: qcom: rpmh-rsc: add RPMH controller for QCOM SoCs") Cc: stable@vger.kernel.org Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Tested-by: Elliot Berman <quic_eberman@quicinc.com> # sm8650-qrd Signed-off-by: Maulik Shah <quic_mkshah@quicinc.com> Link: https://lore.kernel.org/r/20240215-rpmh-rsc-fixes-v4-1-9cbddfcba05b@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-16thermal/drivers/qcom/lmh: Check for SCM availability at probeKonrad Dybcio1-0/+3
commit d9d3490c48df572edefc0b64655259eefdcbb9be upstream. Up until now, the necessary scm availability check has not been performed, leading to possible null pointer dereferences (which did happen for me on RB1). Fix that. Fixes: 53bca371cdf7 ("thermal/drivers/qcom: Add support for LMh driver") Cc: <stable@vger.kernel.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20240308-topic-rb1_lmh-v2-2-bac3914b0fe3@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-16platform/chrome: cros_ec: Handle events during suspend after resume completionKarthikeyan Ramasubramanian1-8/+8
commit 2fbe479c0024e1c6b992184a799055e19932aa48 upstream. Commit 47ea0ddb1f56 ("platform/chrome: cros_ec_lpc: Separate host command and irq disable") re-ordered the resume sequence. Before that change, cros_ec resume sequence is: 1) Enable IRQ 2) Send resume event 3) Handle events during suspend After commit 47ea0ddb1f56 ("platform/chrome: cros_ec_lpc: Separate host command and irq disable"), cros_ec resume sequence is: 1) Enable IRQ 2) Handle events during suspend 3) Send resume event. This re-ordering leads to delayed handling of any events queued between items 2) and 3) with the updated sequence. Also in certain platforms, EC skips triggering interrupt for certain events eg. mkbp events until the resume event is received. Such events are stuck in the host event queue indefinitely. This change puts back the original order to avoid any delay in handling the pending events. Fixes: 47ea0ddb1f56 ("platform/chrome: cros_ec_lpc: Separate host command and irq disable") Cc: <stable@vger.kernel.org> Cc: Lalith Rajendran <lalithkraj@chromium.org> Cc: <chrome-platform@lists.linux.dev> Signed-off-by: Karthikeyan Ramasubramanian <kramasub@chromium.org> Link: https://lore.kernel.org/r/20240429121343.v2.1.If2e0cef959f1f6df9f4d1ab53a97c54aa54208af@changeid Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-16ata: pata_legacy: make legacy_exit() work againSergey Shtylyov1-4/+4
commit d4a89339f17c87c4990070e9116462d16e75894f upstream. Commit defc9cd826e4 ("pata_legacy: resychronize with upstream changes and resubmit") missed to update legacy_exit(), so that it now fails to do any cleanup -- the loop body there can never be entered. Fix that and finally remove now useless nr_legacy_host variable... Found by Linux Verification Center (linuxtesting.org) with the Svace static analysis tool. Fixes: defc9cd826e4 ("pata_legacy: resychronize with upstream changes and resubmit") Cc: stable@vger.kernel.org Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Reviewed-by: Niklas Cassel <cassel@kernel.org> Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-16wifi: rtw89: correct aSIFSTime for 6GHz bandPing-Ke Shih1-1/+1
commit f506e3ee547669cd96842e03c8a772aa7df721fa upstream. aSIFSTime is 10us for 2GHz band and 16us for 5GHz and 6GHz bands. Originally, it doesn't consider 6GHz band and use wrong value, so correct it accordingly. Cc: stable@vger.kernel.org Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://msgid.link/20240430020515.8399-1-pkshih@realtek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-16bcache: fix variable length array abuse in btree_iterMatthew Mirvish6-59/+70
commit 3a861560ccb35f2a4f0a4b8207fa7c2a35fc7f31 upstream. btree_iter is used in two ways: either allocated on the stack with a fixed size MAX_BSETS, or from a mempool with a dynamic size based on the specific cache set. Previously, the struct had a fixed-length array of size MAX_BSETS which was indexed out-of-bounds for the dynamically-sized iterators, which causes UBSAN to complain. This patch uses the same approach as in bcachefs's sort_iter and splits the iterator into a btree_iter with a flexible array member and a btree_iter_stack which embeds a btree_iter as well as a fixed-length data array. Cc: stable@vger.kernel.org Closes: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2039368 Signed-off-by: Matthew Mirvish <matthew@mm12.xyz> Signed-off-by: Coly Li <colyli@suse.de> Link: https://lore.kernel.org/r/20240509011117.2697-3-colyli@suse.de Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2026-01-20 06:20:22 +0300