summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2024-02-23dm: limit the number of targets and parameter size areaMikulas Patocka3-3/+11
commit bd504bcfec41a503b32054da5472904b404341a4 upstream. The kvmalloc function fails with a warning if the size is larger than INT_MAX. The warning was triggered by a syscall testing robot. In order to avoid the warning, this commit limits the number of targets to 1048576 and the size of the parameter area to 1073741824. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23of: property: Add in-ports/out-ports support to of_graph_get_port_parent()Saravana Kannan1-1/+3
commit 8f1e0d791b5281f3a38620bc7c57763dc551be15 upstream. Similar to the existing "ports" node name, coresight device tree bindings have added "in-ports" and "out-ports" as standard node names for a collection of ports. Add support for these name to of_graph_get_port_parent() so that remote-endpoint parsing can find the correct parent node for these coresight ports too. Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20240207011803.2637531-4-saravanak@google.com Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23x86/efi: Disregard setup header of loaded imageArd Biesheuvel1-40/+6
commit 7e50262229faad0c7b8c54477cd1c883f31cc4a7 upstream. The native EFI entrypoint does not take a struct boot_params from the loader, but instead, it constructs one from scratch, using the setup header data placed at the start of the image. This setup header is placed in a way that permits legacy loaders to manipulate the contents (i.e., to pass the kernel command line or the address and size of an initial ramdisk), but EFI boot does not use it in that way - it only copies the contents that were placed there at build time, but EFI loaders will not (and should not) manipulate the setup header to configure the boot. (Commit 63bf28ceb3ebbe76 "efi: x86: Wipe setup_data on pure EFI boot" deals with some of the fallout of using setup_data in a way that breaks EFI boot.) Given that none of the non-zero values that are copied from the setup header into the EFI stub's struct boot_params are relevant to the boot now that the EFI stub no longer enters via the legacy decompressor, the copy can be omitted altogether. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20230912090051.4014114-19-ardb@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23x86/efi: Drop EFI stub .bss from .data sectionArd Biesheuvel1-7/+0
commit 5f51c5d0e905608ba7be126737f7c84a793ae1aa upstream. Now that the EFI stub always zero inits its BSS section upon entry, there is no longer a need to place the BSS symbols carried by the stub into the .data section. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20230912090051.4014114-18-ardb@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23md: bypass block throttle for superblock updateJunxiao Bi1-3/+4
[ Upstream commit d6e035aad6c09991da1c667fb83419329a3baed8 ] commit 5e2cf333b7bd ("md/raid5: Wait for MD_SB_CHANGE_PENDING in raid5d") introduced a hung bug and will be reverted in next patch, since the issue that commit is fixing is due to md superblock write is throttled by wbt, to fix it, we can have superblock write bypass block layer throttle. Fixes: 5e2cf333b7bd ("md/raid5: Wait for MD_SB_CHANGE_PENDING in raid5d") Cc: stable@vger.kernel.org # v5.19+ Suggested-by: Yu Kuai <yukuai3@huawei.com> Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Yu Kuai <yukuai3@huawei.com> Signed-off-by: Song Liu <song@kernel.org> Link: https://lore.kernel.org/r/20231108182216.73611-1-junxiao.bi@oracle.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-23pmdomain: core: Move the unused cleanup to a _sync initcallKonrad Dybcio1-1/+1
commit 741ba0134fa7822fcf4e4a0a537a5c4cfd706b20 upstream. The unused clock cleanup uses the _sync initcall to give all users at earlier initcalls time to probe. Do the same to avoid leaving some PDs dangling at "on" (which actually happened on qcom!). Fixes: 2fe71dcdfd10 ("PM / domains: Add late_initcall to disable unused PM domains") Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20231227-topic-pmdomain_sync_cleanup-v1-1-5f36769d538b@linaro.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23can: netlink: Fix TDCO calculation using the old data bittimingMaxime Jayat1-1/+1
commit 2aa0a5e65eae27dbd96faca92c84ecbf6f492d42 upstream. The TDCO calculation was done using the currently applied data bittiming, instead of the newly computed data bittiming, which means that the TDCO had an invalid value unless setting the same data bittiming twice. Fixes: d99755f71a80 ("can: netlink: add interface for CAN-FD Transmitter Delay Compensation (TDC)") Signed-off-by: Maxime Jayat <maxime.jayat@mobile-devices.fr> Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/all/40579c18-63c0-43a4-8d4c-f3a6c1c0b417@munic.io Cc: stable@vger.kernel.org Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23of: property: fix typo in io-channelsNuno Sa1-1/+1
commit 8f7e917907385e112a845d668ae2832f41e64bf5 upstream. The property is io-channels and not io-channel. This was effectively preventing the devlink creation. Fixes: 8e12257dead7 ("of: property: Add device link support for iommus, mboxes and io-channels") Cc: stable@vger.kernel.org Signed-off-by: Nuno Sa <nuno.sa@analog.com> Reviewed-by: Saravana Kannan <saravanak@google.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/20240123-iio-backend-v7-1-1bff236b8693@analog.com Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23hv_netvsc: Register VF in netvsc_probe if NET_DEVICE_REGISTER missedShradha Gupta1-20/+62
commit 9cae43da9867412f8bd09aee5c8a8dc5e8dc3dc2 upstream. If hv_netvsc driver is unloaded and reloaded, the NET_DEVICE_REGISTER handler cannot perform VF register successfully as the register call is received before netvsc_probe is finished. This is because we register register_netdevice_notifier() very early( even before vmbus_driver_register()). To fix this, we try to register each such matching VF( if it is visible as a netdevice) at the end of netvsc_probe. Cc: stable@vger.kernel.org Fixes: 85520856466e ("hv_netvsc: Fix race of register_netdevice_notifier and VF register") Suggested-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: Shradha Gupta <shradhagupta@linux.microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23net: stmmac: protect updates of 64-bit statistics countersPetr Tesarik7-157/+221
commit 38cc3c6dcc09dc3a1800b5ec22aef643ca11eab8 upstream. As explained by a comment in <linux/u64_stats_sync.h>, write side of struct u64_stats_sync must ensure mutual exclusion, or one seqcount update could be lost on 32-bit platforms, thus blocking readers forever. Such lockups have been observed in real world after stmmac_xmit() on one CPU raced with stmmac_napi_poll_tx() on another CPU. To fix the issue without introducing a new lock, split the statics into three parts: 1. fields updated only under the tx queue lock, 2. fields updated only during NAPI poll, 3. fields updated only from interrupt context, Updates to fields in the first two groups are already serialized through other locks. It is sufficient to split the existing struct u64_stats_sync so that each group has its own. Note that tx_set_ic_bit is updated from both contexts. Split this counter so that each context gets its own, and calculate their sum to get the total value in stmmac_get_ethtool_stats(). For the third group, multiple interrupts may be processed by different CPUs at the same time, but interrupts on the same CPU will not nest. Move fields from this group to a newly created per-cpu struct stmmac_pcpu_stats. Fixes: 133466c3bbe1 ("net: stmmac: use per-queue 64 bit statistics where necessary") Link: https://lore.kernel.org/netdev/Za173PhviYg-1qIn@torres.zugschlus.de/t/ Cc: stable@vger.kernel.org Signed-off-by: Petr Tesarik <petr@tesarici.cz> Reviewed-by: Jisheng Zhang <jszhang@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23pmdomain: renesas: r8a77980-sysc: CR7 must be always onGeert Uytterhoeven1-1/+2
commit f0e4a1356466ec1858ae8e5c70bea2ce5e55008b upstream. The power domain containing the Cortex-R7 CPU core on the R-Car V3H SoC must always be in power-on state, unlike on other SoCs in the R-Car Gen3 family. See Table 9.4 "Power domains" in the R-Car Series, 3rd Generation Hardware User’s Manual Rev.1.00 and later. Fix this by marking the domain as a CPU domain without control registers, so the driver will not touch it. Fixes: 41d6d8bd8ae9 ("soc: renesas: rcar-sysc: add R8A77980 support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/fdad9a86132d53ecddf72b734dac406915c4edc0.1705076735.git.geert+renesas@glider.be Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23net: ethernet: ti: cpsw_new: enable mac_managed_pm to fix mdioSinthu Raja1-0/+3
commit 9def04e759caa5a3d741891037ae99f81e2fff01 upstream. The below commit introduced a WARN when phy state is not in the states: PHY_HALTED, PHY_READY and PHY_UP. commit 744d23c71af3 ("net: phy: Warn about incorrect mdio_bus_phy_resume() state") When cpsw_new resumes, there have port in PHY_NOLINK state, so the below warning comes out. Set mac_managed_pm be true to tell mdio that the phy resume/suspend is managed by the mac, to fix the following warning: WARNING: CPU: 0 PID: 965 at drivers/net/phy/phy_device.c:326 mdio_bus_phy_resume+0x140/0x144 CPU: 0 PID: 965 Comm: sh Tainted: G O 6.1.46-g247b2535b2 #1 Hardware name: Generic AM33XX (Flattened Device Tree) unwind_backtrace from show_stack+0x18/0x1c show_stack from dump_stack_lvl+0x24/0x2c dump_stack_lvl from __warn+0x84/0x15c __warn from warn_slowpath_fmt+0x1a8/0x1c8 warn_slowpath_fmt from mdio_bus_phy_resume+0x140/0x144 mdio_bus_phy_resume from dpm_run_callback+0x3c/0x140 dpm_run_callback from device_resume+0xb8/0x2b8 device_resume from dpm_resume+0x144/0x314 dpm_resume from dpm_resume_end+0x14/0x20 dpm_resume_end from suspend_devices_and_enter+0xd0/0x924 suspend_devices_and_enter from pm_suspend+0x2e0/0x33c pm_suspend from state_store+0x74/0xd0 state_store from kernfs_fop_write_iter+0x104/0x1ec kernfs_fop_write_iter from vfs_write+0x1b8/0x358 vfs_write from ksys_write+0x78/0xf8 ksys_write from ret_fast_syscall+0x0/0x54 Exception stack(0xe094dfa8 to 0xe094dff0) dfa0: 00000004 005c3fb8 00000001 005c3fb8 00000004 00000001 dfc0: 00000004 005c3fb8 b6f6bba0 00000004 00000004 0059edb8 00000000 00000000 dfe0: 00000004 bed918f0 b6f09bd3 b6e89a66 Cc: <stable@vger.kernel.org> # v6.0+ Fixes: 744d23c71af3 ("net: phy: Warn about incorrect mdio_bus_phy_resume() state") Fixes: fba863b81604 ("net: phy: make PHY PM ops a no-op if MAC driver manages PHY PM") Signed-off-by: Sinthu Raja <sinthu.raja@ti.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23s390/qeth: Fix potential loss of L3-IP@ in case of network issuesAlexandra Winter1-3/+6
commit 2fe8a236436fe40d8d26a1af8d150fc80f04ee1a upstream. Symptom: In case of a bad cable connection (e.g. dirty optics) a fast sequence of network DOWN-UP-DOWN-UP could happen. UP triggers recovery of the qeth interface. In case of a second DOWN while recovery is still ongoing, it can happen that the IP@ of a Layer3 qeth interface is lost and will not be recovered by the second UP. Problem: When registration of IP addresses with Layer 3 qeth devices fails, (e.g. because of bad address format) the respective IP address is deleted from its hash-table in the driver. If registration fails because of a ENETDOWN condition, the address should stay in the hashtable, so a subsequent recovery can restore it. 3caa4af834df ("qeth: keep ip-address after LAN_OFFLINE failure") fixes this for registration failures during normal operation, but not during recovery. Solution: Keep L3-IP address in case of ENETDOWN in qeth_l3_recover_ip(). For consistency with qeth_l3_add_ip() we also keep it in case of EADDRINUSE, i.e. for some reason the card already/still has this address registered. Fixes: 4a71df50047f ("qeth: new qeth device driver") Cc: stable@vger.kernel.org Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Link: https://lore.kernel.org/r/20240206085849.2902775-1-wintera@linux.ibm.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23net: ethernet: ti: cpsw: enable mac_managed_pm to fix mdioSinthu Raja1-0/+2
commit bc4ce46b1e3d1da4309405cd4afc7c0fcddd0b90 upstream. The below commit introduced a WARN when phy state is not in the states: PHY_HALTED, PHY_READY and PHY_UP. commit 744d23c71af3 ("net: phy: Warn about incorrect mdio_bus_phy_resume() state") When cpsw resumes, there have port in PHY_NOLINK state, so the below warning comes out. Set mac_managed_pm be true to tell mdio that the phy resume/suspend is managed by the mac, to fix the following warning: WARNING: CPU: 0 PID: 965 at drivers/net/phy/phy_device.c:326 mdio_bus_phy_resume+0x140/0x144 CPU: 0 PID: 965 Comm: sh Tainted: G O 6.1.46-g247b2535b2 #1 Hardware name: Generic AM33XX (Flattened Device Tree) unwind_backtrace from show_stack+0x18/0x1c show_stack from dump_stack_lvl+0x24/0x2c dump_stack_lvl from __warn+0x84/0x15c __warn from warn_slowpath_fmt+0x1a8/0x1c8 warn_slowpath_fmt from mdio_bus_phy_resume+0x140/0x144 mdio_bus_phy_resume from dpm_run_callback+0x3c/0x140 dpm_run_callback from device_resume+0xb8/0x2b8 device_resume from dpm_resume+0x144/0x314 dpm_resume from dpm_resume_end+0x14/0x20 dpm_resume_end from suspend_devices_and_enter+0xd0/0x924 suspend_devices_and_enter from pm_suspend+0x2e0/0x33c pm_suspend from state_store+0x74/0xd0 state_store from kernfs_fop_write_iter+0x104/0x1ec kernfs_fop_write_iter from vfs_write+0x1b8/0x358 vfs_write from ksys_write+0x78/0xf8 ksys_write from ret_fast_syscall+0x0/0x54 Exception stack(0xe094dfa8 to 0xe094dff0) dfa0: 00000004 005c3fb8 00000001 005c3fb8 00000004 00000001 dfc0: 00000004 005c3fb8 b6f6bba0 00000004 00000004 0059edb8 00000000 00000000 dfe0: 00000004 bed918f0 b6f09bd3 b6e89a66 Cc: <stable@vger.kernel.org> # v6.0+ Fixes: 744d23c71af3 ("net: phy: Warn about incorrect mdio_bus_phy_resume() state") Fixes: fba863b81604 ("net: phy: make PHY PM ops a no-op if MAC driver manages PHY PM") Signed-off-by: Sinthu Raja <sinthu.raja@ti.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23mmc: sdhci-pci-o2micro: Fix a warm reboot issue that disk can't be detected ↵Fred Ai1-0/+30
by BIOS commit 58aeb5623c2ebdadefe6352b14f8076a7073fea0 upstream. Driver shall switch clock source from DLL clock to OPE clock when power off card to ensure that card can be identified with OPE clock by BIOS. Signed-off-by: Fred Ai <fred.ai@bayhubtech.com> Fixes:4be33cf18703 ("mmc: sdhci-pci-o2micro: Improve card input timing at SDR104/HS200 mode") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240203102908.4683-1-fredaibayhubtech@126.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23thunderbolt: Fix setting the CNS bit in ROUTER_CS_5Mohammad Rahimi2-2/+2
commit ec4d82f855ce332de26fe080892483de98cc1a19 upstream. The bit 23, CM TBT3 Not Supported (CNS), in ROUTER_CS_5 indicates whether a USB4 Connection Manager is TBT3-Compatible and should be: 0b for TBT3-Compatible 1b for Not TBT3-Compatible Fixes: b04079837b20 ("thunderbolt: Add initial support for USB4") Cc: stable@vger.kernel.org Signed-off-by: Mohammad Rahimi <rahimi.mhmmd@gmail.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23irqchip/gic-v3-its: Fix GICv4.1 VPE affinity updateMarc Zyngier1-9/+13
commit af9acbfc2c4b72c378d0b9a2ee023ed01055d3e2 upstream. When updating the affinity of a VPE, the VMOVP command is currently skipped if the two CPUs are part of the same VPE affinity. But this is wrong, as the doorbell corresponding to this VPE is still delivered on the 'old' CPU, which screws up the balancing. Furthermore, offlining that 'old' CPU results in doorbell interrupts generated for this VPE being discarded. The harsh reality is that VMOVP cannot be elided when a set_affinity() request occurs. It needs to be obeyed, and if an optimisation is to be made, it is at the point where the affinity change request is made (such as in KVM). Drop the VMOVP elision altogether, and only use the vpe_table_mask to try and stay within the same ITS affinity group if at all possible. Fixes: dd3f050a216e (irqchip/gic-v4.1: Implement the v4.1 flavour of VMOVP) Reported-by: Kunkun Jiang <jiangkunkun@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240213101206.2137483-4-maz@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23irqchip/gic-v3-its: Restore quirk probing for ACPI-based systemsMarc Zyngier1-1/+2
commit 8b02da04ad978827e5ccd675acf170198f747a7a upstream. While refactoring the way the ITSs are probed, the handling of quirks applicable to ACPI-based platforms was lost. As a result, systems such as HIP07 lose their GICv4 functionnality, and some other may even fail to boot, unless they are configured to boot with DT. Move the enabling of quirks into its_probe_one(), making it common to all firmware implementations. Fixes: 9585a495ac93 ("irqchip/gic-v3-its: Split allocation from initialisation of its_node") Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Zenghui Yu <yuzenghui@huawei.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240213101206.2137483-3-maz@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23irqchip/irq-brcmstb-l2: Add write memory barrier before exitDoug Berger1-1/+4
commit b0344d6854d25a8b3b901c778b1728885dd99007 upstream. It was observed on Broadcom devices that use GIC v3 architecture L1 interrupt controllers as the parent of brcmstb-l2 interrupt controllers that the deactivation of the parent interrupt could happen before the brcmstb-l2 deasserted its output. This would lead the GIC to reactivate the interrupt only to find that no L2 interrupt was pending. The result was a spurious interrupt invoking handle_bad_irq() with its associated messaging. While this did not create a functional problem it is a waste of cycles. The hazard exists because the memory mapped bus writes to the brcmstb-l2 registers are buffered and the GIC v3 architecture uses a very efficient system register write to deactivate the interrupt. Add a write memory barrier prior to invoking chained_irq_exit() to introduce a dsb(st) on those systems to ensure the system register write cannot be executed until the memory mapped writes are visible to the system. [ florian: Added Fixes tag ] Fixes: 7f646e92766e ("irqchip: brcmstb-l2: Add Broadcom Set Top Box Level-2 interrupt controller") Signed-off-by: Doug Berger <opendmb@gmail.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Florian Fainelli <florian.fainelli@broadcom.com> Acked-by: Marc Zyngier <maz@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240210012449.3009125-1-florian.fainelli@broadcom.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23wifi: iwlwifi: mvm: fix a crash when we run out of stationsEmmanuel Grumbach2-0/+7
commit b7198383ef2debe748118996f627452281cf27d7 upstream. A DoS tool that injects loads of authentication frames made our AP crash. The iwl_mvm_is_dup() function couldn't find the per-queue dup_data which was not allocated. The root cause for that is that we ran out of stations in the firmware and we didn't really add the station to the firmware, yet we didn't return an error to mac80211. Mac80211 was thinking that we have the station and because of that, sta_info::uploaded was set to 1. This allowed ieee80211_find_sta_by_ifaddr() to return a valid station object, but that ieee80211_sta didn't have any iwl_mvm_sta object initialized and that caused the crash mentioned earlier when we got Rx on that station. Cc: stable@vger.kernel.org Fixes: 57974a55d995 ("wifi: iwlwifi: mvm: refactor iwl_mvm_mac_sta_state_common()") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240206175739.1f76c44b2486.I6a00955e2842f15f0a089db2f834adb9d10fbe35@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23wifi: iwlwifi: fix double-free bugJohannes Berg1-0/+1
commit 353d321f63f7dbfc9ef58498cc732c9fe886a596 upstream. The storage for the TLV PC register data wasn't done like all the other storage in the drv->fw area, which is cleared at the end of deallocation. Therefore, the freeing must also be done differently, explicitly NULL'ing it out after the free, since otherwise there's a nasty double-free bug here if a file fails to load after this has been parsed, and we get another free later (e.g. because no other file exists.) Fix that by adding the missing NULL assignment. Cc: stable@vger.kernel.org Fixes: 5e31b3df86ec ("wifi: iwlwifi: dbg: print pc register data once fw dump occurred") Reported-by: Guy Kaplan <guy.kaplan@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240123200528.675f3c24ec0d.I6ab4015cd78d82dd95471f840629972ef0331de3@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23nfp: flower: prevent re-adding mac index for bonded portDaniel de Villiers1-1/+1
commit 1a1c13303ff6d64e6f718dc8aa614e580ca8d9b4 upstream. When physical ports are reset (either through link failure or manually toggled down and up again) that are slaved to a Linux bond with a tunnel endpoint IP address on the bond device, not all tunnel packets arriving on the bond port are decapped as expected. The bond dev assigns the same MAC address to itself and each of its slaves. When toggling a slave device, the same MAC address is therefore offloaded to the NFP multiple times with different indexes. The issue only occurs when re-adding the shared mac. The nfp_tunnel_add_shared_mac() function has a conditional check early on that checks if a mac entry already exists and if that mac entry is global: (entry && nfp_tunnel_is_mac_idx_global(entry->index)). In the case of a bonded device (For example br-ex), the mac index is obtained, and no new index is assigned. We therefore modify the conditional in nfp_tunnel_add_shared_mac() to check if the port belongs to the LAG along with the existing checks to prevent a new global mac index from being re-assigned to the slave port. Fixes: 20cce8865098 ("nfp: flower: enable MAC address sharing for offloadable devs") CC: stable@vger.kernel.org # 5.1+ Signed-off-by: Daniel de Villiers <daniel.devilliers@corigine.com> Signed-off-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23nfp: enable NETDEV_XDP_ACT_REDIRECT feature flagJames Hershaw1-0/+1
commit 0f4d6f011bca0df2051532b41b596366aa272019 upstream. Enable previously excluded xdp feature flag for NFD3 devices. This feature flag is required in order to bind nfp interfaces to an xdp socket and the nfp driver does in fact support the feature. Fixes: 66c0e13ad236 ("drivers: net: turn on XDP features") Cc: stable@vger.kernel.org # 6.3+ Signed-off-by: James Hershaw <james.hershaw@corigine.com> Signed-off-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23nfp: use correct macro for LengthSelect in BAR configDaniel Basilio1-2/+4
commit b3d4f7f2288901ed2392695919b3c0e24c1b4084 upstream. The 1st and 2nd expansion BAR configuration registers are configured, when the driver starts up, in variables 'barcfg_msix_general' and 'barcfg_msix_xpb', respectively. The 'LengthSelect' field is ORed in from bit 0, which is incorrect. The 'LengthSelect' field should start from bit 27. This has largely gone un-noticed because NFP_PCIE_BAR_PCIE2CPP_LengthSelect_32BIT happens to be 0. Fixes: 4cb584e0ee7d ("nfp: add CPP access core") Cc: stable@vger.kernel.org # 4.11+ Signed-off-by: Daniel Basilio <daniel.basilio@corigine.com> Signed-off-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23crypto: ccp - Fix null pointer dereference in __sev_platform_shutdown_lockedKim Phillips1-2/+8
commit ccb88e9549e7cfd8bcd511c538f437e20026e983 upstream. The SEV platform device can be shutdown with a null psp_master, e.g., using DEBUG_TEST_DRIVER_REMOVE. Found using KASAN: [ 137.148210] ccp 0000:23:00.1: enabling device (0000 -> 0002) [ 137.162647] ccp 0000:23:00.1: no command queues available [ 137.170598] ccp 0000:23:00.1: sev enabled [ 137.174645] ccp 0000:23:00.1: psp enabled [ 137.178890] general protection fault, probably for non-canonical address 0xdffffc000000001e: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC KASAN NOPTI [ 137.182693] KASAN: null-ptr-deref in range [0x00000000000000f0-0x00000000000000f7] [ 137.182693] CPU: 93 PID: 1 Comm: swapper/0 Not tainted 6.8.0-rc1+ #311 [ 137.182693] RIP: 0010:__sev_platform_shutdown_locked+0x51/0x180 [ 137.182693] Code: 08 80 3c 08 00 0f 85 0e 01 00 00 48 8b 1d 67 b6 01 08 48 b8 00 00 00 00 00 fc ff df 48 8d bb f0 00 00 00 48 89 f9 48 c1 e9 03 <80> 3c 01 00 0f 85 fe 00 00 00 48 8b 9b f0 00 00 00 48 85 db 74 2c [ 137.182693] RSP: 0018:ffffc900000cf9b0 EFLAGS: 00010216 [ 137.182693] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 000000000000001e [ 137.182693] RDX: 0000000000000000 RSI: 0000000000000008 RDI: 00000000000000f0 [ 137.182693] RBP: ffffc900000cf9c8 R08: 0000000000000000 R09: fffffbfff58f5a66 [ 137.182693] R10: ffffc900000cf9c8 R11: ffffffffac7ad32f R12: ffff8881e5052c28 [ 137.182693] R13: ffff8881e5052c28 R14: ffff8881758e43e8 R15: ffffffffac64abf8 [ 137.182693] FS: 0000000000000000(0000) GS:ffff889de7000000(0000) knlGS:0000000000000000 [ 137.182693] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 137.182693] CR2: 0000000000000000 CR3: 0000001cf7c7e000 CR4: 0000000000350ef0 [ 137.182693] Call Trace: [ 137.182693] <TASK> [ 137.182693] ? show_regs+0x6c/0x80 [ 137.182693] ? __die_body+0x24/0x70 [ 137.182693] ? die_addr+0x4b/0x80 [ 137.182693] ? exc_general_protection+0x126/0x230 [ 137.182693] ? asm_exc_general_protection+0x2b/0x30 [ 137.182693] ? __sev_platform_shutdown_locked+0x51/0x180 [ 137.182693] sev_firmware_shutdown.isra.0+0x1e/0x80 [ 137.182693] sev_dev_destroy+0x49/0x100 [ 137.182693] psp_dev_destroy+0x47/0xb0 [ 137.182693] sp_destroy+0xbb/0x240 [ 137.182693] sp_pci_remove+0x45/0x60 [ 137.182693] pci_device_remove+0xaa/0x1d0 [ 137.182693] device_remove+0xc7/0x170 [ 137.182693] really_probe+0x374/0xbe0 [ 137.182693] ? srso_return_thunk+0x5/0x5f [ 137.182693] __driver_probe_device+0x199/0x460 [ 137.182693] driver_probe_device+0x4e/0xd0 [ 137.182693] __driver_attach+0x191/0x3d0 [ 137.182693] ? __pfx___driver_attach+0x10/0x10 [ 137.182693] bus_for_each_dev+0x100/0x190 [ 137.182693] ? __pfx_bus_for_each_dev+0x10/0x10 [ 137.182693] ? __kasan_check_read+0x15/0x20 [ 137.182693] ? srso_return_thunk+0x5/0x5f [ 137.182693] ? _raw_spin_unlock+0x27/0x50 [ 137.182693] driver_attach+0x41/0x60 [ 137.182693] bus_add_driver+0x2a8/0x580 [ 137.182693] driver_register+0x141/0x480 [ 137.182693] __pci_register_driver+0x1d6/0x2a0 [ 137.182693] ? srso_return_thunk+0x5/0x5f [ 137.182693] ? esrt_sysfs_init+0x1cd/0x5d0 [ 137.182693] ? __pfx_sp_mod_init+0x10/0x10 [ 137.182693] sp_pci_init+0x22/0x30 [ 137.182693] sp_mod_init+0x14/0x30 [ 137.182693] ? __pfx_sp_mod_init+0x10/0x10 [ 137.182693] do_one_initcall+0xd1/0x470 [ 137.182693] ? __pfx_do_one_initcall+0x10/0x10 [ 137.182693] ? parameq+0x80/0xf0 [ 137.182693] ? srso_return_thunk+0x5/0x5f [ 137.182693] ? __kmalloc+0x3b0/0x4e0 [ 137.182693] ? kernel_init_freeable+0x92d/0x1050 [ 137.182693] ? kasan_populate_vmalloc_pte+0x171/0x190 [ 137.182693] ? srso_return_thunk+0x5/0x5f [ 137.182693] kernel_init_freeable+0xa64/0x1050 [ 137.182693] ? __pfx_kernel_init+0x10/0x10 [ 137.182693] kernel_init+0x24/0x160 [ 137.182693] ? __switch_to_asm+0x3e/0x70 [ 137.182693] ret_from_fork+0x40/0x80 [ 137.182693] ? __pfx_kernel_init+0x10/0x10 [ 137.182693] ret_from_fork_asm+0x1b/0x30 [ 137.182693] </TASK> [ 137.182693] Modules linked in: [ 137.538483] ---[ end trace 0000000000000000 ]--- Fixes: 1b05ece0c931 ("crypto: ccp - During shutdown, check SEV data pointer before using") Cc: stable@vger.kernel.org Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Kim Phillips <kim.phillips@amd.com> Reviewed-by: Liam Merwick <liam.merwick@oracle.com> Acked-by: John Allen <john.allen@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23mmc: slot-gpio: Allow non-sleeping GPIO roAlexander Stein1-1/+5
commit cc9432c4fb159a3913e0ce3173b8218cd5bad2e0 upstream. This change uses the appropriate _cansleep or non-sleeping API for reading GPIO read-only state. This allows users with GPIOs that never sleepbeing called in atomic context. Implement the same mechanism as in commit 52af318c93e97 ("mmc: Allow non-sleeping GPIO cd"). Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240206083912.2543142-1-alexander.stein@ew.tq-group.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23serial: mxs-auart: fix txJiri Slaby (SUSE)1-1/+4
commit 7be50f2e8f20fc2299069b28dea59a28e3abe20a upstream. Emil reports: After updating Linux on an i.MX28 board, serial communication over AUART broke. When I TX from the board and measure on the TX pin, it seems like the HW fifo is not emptied before the transmission is stopped. MXS performs weird things with stop_tx(). The driver makes it conditional on uart_tx_stopped(). So the driver needs special handling. Pass the brand new UART_TX_NOSTOP to uart_port_tx_flags() and handle the stop on its own. Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org> Reported-by: Emil Kronborg <emil.kronborg@protonmail.com> Cc: stable <stable@kernel.org> Fixes: 2d141e683e9a ("tty: serial: use uart_port_tx() helper") Closes: https://lore.kernel.org/all/miwgbnvy3hjpnricubg76ytpn7xoceehwahupy25bubbduu23s@om2lptpa26xw/ Tested-by: Stefan Wahren <wahrenst@gmx.net> Tested-by: Emil Kronborg <emil.kronborg@protonmail.com> Link: https://lore.kernel.org/r/20240201105557.28043-2-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23serial: max310x: prevent infinite while() loop in port startupHugo Villeneuve1-2/+18
commit b35f8dbbce818b02c730dc85133dc7754266e084 upstream. If there is a problem after resetting a port, the do/while() loop that checks the default value of DIVLSB register may run forever and spam the I2C bus. Add a delay before each read of DIVLSB, and a maximum number of tries to prevent that situation from happening. Also fail probe if port reset is unsuccessful. Fixes: 10d8b34a4217 ("serial: max310x: Driver rework") Cc: stable@vger.kernel.org Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Link: https://lore.kernel.org/r/20240116213001.3691629-5-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23serial: max310x: fail probe if clock crystal is unstableHugo Villeneuve1-3/+9
commit 8afa6c6decea37e7cb473d2c60473f37f46cea35 upstream. A stable clock is really required in order to use this UART, so log an error message and bail out if the chip reports that the clock is not stable. Fixes: 4cf9a888fd3c ("serial: max310x: Check the clock readiness") Cc: stable@vger.kernel.org Suggested-by: Jan Kundrát <jan.kundrat@cesnet.cz> Link: https://www.spinics.net/lists/linux-serial/msg35773.html Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Link: https://lore.kernel.org/r/20240116213001.3691629-4-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23serial: max310x: improve crystal stable clock detectionHugo Villeneuve1-5/+16
commit 93cd256ab224c2519e7c4e5f58bb4f1ac2bf0965 upstream. Some people are seeing a warning similar to this when using a crystal: max310x 11-006c: clock is not stable yet The datasheet doesn't mention the maximum time to wait for the clock to be stable when using a crystal, and it seems that the 10ms delay in the driver is not always sufficient. Jan Kundrát reported that it took three tries (each separated by 10ms) to get a stable clock. Modify behavior to check stable clock ready bit multiple times (20), and waiting 10ms between each try. Note: the first draft of the driver originally used a 50ms delay, without checking the clock stable bit. Then a loop with 1000 retries was implemented, each time reading the clock stable bit. Fixes: 4cf9a888fd3c ("serial: max310x: Check the clock readiness") Cc: stable@vger.kernel.org Suggested-by: Jan Kundrát <jan.kundrat@cesnet.cz> Link: https://www.spinics.net/lists/linux-serial/msg35773.html Link: https://lore.kernel.org/all/20240110174015.6f20195fde08e5c9e64e5675@hugovil.com/raw Link: https://github.com/boundarydevices/linux/commit/e5dfe3e4a751392515d78051973190301a37ca9a Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Link: https://lore.kernel.org/r/20240116213001.3691629-3-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23serial: max310x: set default value when reading clock ready bitHugo Villeneuve1-1/+1
commit 0419373333c2f2024966d36261fd82a453281e80 upstream. If regmap_read() returns a non-zero value, the 'val' variable can be left uninitialized. Clear it before calling regmap_read() to make sure we properly detect the clock ready bit. Fixes: 4cf9a888fd3c ("serial: max310x: Check the clock readiness") Cc: stable@vger.kernel.org Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Link: https://lore.kernel.org/r/20240116213001.3691629-2-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23nfp: flower: fix hardware offload for the transfer layer portHui Zhou1-2/+22
commit 3a007b8009b5f8af021021b7a590a6da0dc4c6e0 upstream. The nfp driver will merge the tp source port and tp destination port into one dword which the offset must be zero to do hardware offload. However, the mangle action for the tp source port and tp destination port is separated for tc ct action. Modify the mangle action for the FLOW_ACT_MANGLE_HDR_TYPE_TCP and FLOW_ACT_MANGLE_HDR_TYPE_UDP to satisfy the nfp driver offload check for the tp port. The mangle action provides a 4B value for source, and a 4B value for the destination, but only 2B of each contains the useful information. For offload the 2B of each is combined into a single 4B word. Since the incoming mask for the source is '0xFFFF<mask>' the shift-left will throw away the 0xFFFF part. When this gets combined together in the offload it will clear the destination field. Fix this by setting the lower bits back to 0xFFFF, effectively doing a rotate-left operation on the mask. Fixes: 5cee92c6f57a ("nfp: flower: support hw offload for ct nat action") CC: stable@vger.kernel.org # 6.1+ Signed-off-by: Hui Zhou <hui.zhou@corigine.com> Signed-off-by: Louis Peens <louis.peens@corigine.com> Link: https://lore.kernel.org/r/20240124151909.31603-3-louis.peens@corigine.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23nfp: flower: add hardware offload check for post ct entryHui Zhou1-1/+21
commit cefa98e806fd4e2a5e2047457a11ae5f17b8f621 upstream. The nfp offload flow pay will not allocate a mask id when the out port is openvswitch internal port. This is because these flows are used to configure the pre_tun table and are never actually send to the firmware as an add-flow message. When a tc rule which action contains ct and the post ct entry's out port is openvswitch internal port, the merge offload flow pay with the wrong mask id of 0 will be send to the firmware. Actually, the nfp can not support hardware offload for this situation, so return EOPNOTSUPP. Fixes: bd0fe7f96a3c ("nfp: flower-ct: add zone table entry when handling pre/post_ct flows") CC: stable@vger.kernel.org # 5.14+ Signed-off-by: Hui Zhou <hui.zhou@corigine.com> Signed-off-by: Louis Peens <louis.peens@corigine.com> Link: https://lore.kernel.org/r/20240124151909.31603-2-louis.peens@corigine.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23net: dsa: mv88e6xxx: Fix failed probe due to unsupported C45 readsAndrew Lunn1-1/+1
commit 585b40e25dc9ff3d2b03d1495150540849009e5b upstream. Not all mv88e6xxx device support C45 read/write operations. Those which do not return -EOPNOTSUPP. However, when phylib scans the bus, it considers this fatal, and the probe of the MDIO bus fails, which in term causes the mv88e6xxx probe as a whole to fail. When there is no device on the bus for a given address, the pull up resistor on the data line results in the read returning 0xffff. The phylib core code understands this when scanning for devices on the bus. C45 allows multiple devices to be supported at one address, so phylib will perform a few reads at each address, so although thought not the most efficient solution, it is a way to avoid fatal errors. Make use of this as a minimal fix for stable to fix the probing problems. Follow up patches will rework how C45 operates to make it similar to C22 which considers -ENODEV as a none-fatal, and swap mv88e6xxx to using this. Cc: stable@vger.kernel.org Fixes: 743a19e38d02 ("net: dsa: mv88e6xxx: Separate C22 and C45 transactions") Reported-by: Tim Menninger <tmenninger@purestorage.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20240129224948.1531452-1-andrew@lunn.ch Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23hv_netvsc: Fix race condition between netvsc_probe and netvsc_removeSouradeep Chakrabarti1-1/+4
commit e0526ec5360a48ad3ab2e26e802b0532302a7e11 upstream. In commit ac5047671758 ("hv_netvsc: Disable NAPI before closing the VMBus channel"), napi_disable was getting called for all channels, including all subchannels without confirming if they are enabled or not. This caused hv_netvsc getting hung at napi_disable, when netvsc_probe() has finished running but nvdev->subchan_work has not started yet. netvsc_subchan_work() -> rndis_set_subchannel() has not created the sub-channels and because of that netvsc_sc_open() is not running. netvsc_remove() calls cancel_work_sync(&nvdev->subchan_work), for which netvsc_subchan_work did not run. netif_napi_add() sets the bit NAPI_STATE_SCHED because it ensures NAPI cannot be scheduled. Then netvsc_sc_open() -> napi_enable will clear the NAPIF_STATE_SCHED bit, so it can be scheduled. napi_disable() does the opposite. Now during netvsc_device_remove(), when napi_disable is called for those subchannels, napi_disable gets stuck on infinite msleep. This fix addresses this problem by ensuring that napi_disable() is not getting called for non-enabled NAPI struct. But netif_napi_del() is still necessary for these non-enabled NAPI struct for cleanup purpose. Call trace: [ 654.559417] task:modprobe state:D stack: 0 pid: 2321 ppid: 1091 flags:0x00004002 [ 654.568030] Call Trace: [ 654.571221] <TASK> [ 654.573790] __schedule+0x2d6/0x960 [ 654.577733] schedule+0x69/0xf0 [ 654.581214] schedule_timeout+0x87/0x140 [ 654.585463] ? __bpf_trace_tick_stop+0x20/0x20 [ 654.590291] msleep+0x2d/0x40 [ 654.593625] napi_disable+0x2b/0x80 [ 654.597437] netvsc_device_remove+0x8a/0x1f0 [hv_netvsc] [ 654.603935] rndis_filter_device_remove+0x194/0x1c0 [hv_netvsc] [ 654.611101] ? do_wait_intr+0xb0/0xb0 [ 654.615753] netvsc_remove+0x7c/0x120 [hv_netvsc] [ 654.621675] vmbus_remove+0x27/0x40 [hv_vmbus] Cc: stable@vger.kernel.org Fixes: ac5047671758 ("hv_netvsc: Disable NAPI before closing the VMBus channel") Signed-off-by: Souradeep Chakrabarti <schakrabarti@linux.microsoft.com> Reviewed-by: Dexuan Cui <decui@microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/1706686551-28510-1-git-send-email-schakrabarti@linux.microsoft.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23drm/amd/display: Preserve original aspect ratio in create streamTom Chung1-0/+2
commit deb110292180cd501f6fde2a0178d65fcbcabb0c upstream. [Why] The original picture aspect ratio in mode struct may have chance be overwritten with wrong aspect ratio data in create_stream_for_sink(). It will create a different VIC output and cause HDMI compliance test failed. [How] Preserve the original picture aspect ratio data during create the stream. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23drm/amd/display: Increase frame-larger-than for all display_mode_vba filesNathan Chancellor1-3/+3
commit e63e35f0164c43fbc1adb481d6604f253b9f9667 upstream. After a recent change in LLVM, allmodconfig (which has CONFIG_KCSAN=y and CONFIG_WERROR=y enabled) has a few new instances of -Wframe-larger-than for the mode support and system configuration functions: drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn20/display_mode_vba_20v2.c:3393:6: error: stack frame size (2144) exceeds limit (2048) in 'dml20v2_ModeSupportAndSystemConfigurationFull' [-Werror,-Wframe-larger-than] 3393 | void dml20v2_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lib) | ^ 1 error generated. drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn21/display_mode_vba_21.c:3520:6: error: stack frame size (2192) exceeds limit (2048) in 'dml21_ModeSupportAndSystemConfigurationFull' [-Werror,-Wframe-larger-than] 3520 | void dml21_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lib) | ^ 1 error generated. drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn20/display_mode_vba_20.c:3286:6: error: stack frame size (2128) exceeds limit (2048) in 'dml20_ModeSupportAndSystemConfigurationFull' [-Werror,-Wframe-larger-than] 3286 | void dml20_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lib) | ^ 1 error generated. Without the sanitizers enabled, there are no warnings. This was the catalyst for commit 6740ec97bcdb ("drm/amd/display: Increase frame warning limit with KASAN or KCSAN in dml2") and that same change was made to dml in commit 5b750b22530f ("drm/amd/display: Increase frame warning limit with KASAN or KCSAN in dml") but the frame_warn_flag variable was not applied to all files. Do so now to clear up the warnings and make all these files consistent. Cc: stable@vger.kernel.org Closes: https://github.com/ClangBuiltLinux/linux/issue/1990 Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23drm/amd/display: Fix MST Null Ptr for RVFangzhi Zuo1-5/+7
commit e6a7df96facdcf5b1f71eb3ec26f2f9f6ad61e57 upstream. The change try to fix below error specific to RV platform: BUG: kernel NULL pointer dereference, address: 0000000000000008 PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 4 PID: 917 Comm: sway Not tainted 6.3.9-arch1-1 #1 124dc55df4f5272ccb409f39ef4872fc2b3376a2 Hardware name: LENOVO 20NKS01Y00/20NKS01Y00, BIOS R12ET61W(1.31 ) 07/28/2022 RIP: 0010:drm_dp_atomic_find_time_slots+0x5e/0x260 [drm_display_helper] Code: 01 00 00 48 8b 85 60 05 00 00 48 63 80 88 00 00 00 3b 43 28 0f 8d 2e 01 00 00 48 8b 53 30 48 8d 04 80 48 8d 04 c2 48 8b 40 18 <48> 8> RSP: 0018:ffff960cc2df77d8 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffff8afb87e81280 RCX: 0000000000000224 RDX: ffff8afb9ee37c00 RSI: ffff8afb8da1a578 RDI: ffff8afb87e81280 RBP: ffff8afb83d67000 R08: 0000000000000001 R09: ffff8afb9652f850 R10: ffff960cc2df7908 R11: 0000000000000002 R12: 0000000000000000 R13: ffff8afb8d7688a0 R14: ffff8afb8da1a578 R15: 0000000000000224 FS: 00007f4dac35ce00(0000) GS:ffff8afe30b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 000000010ddc6000 CR4: 00000000003506e0 Call Trace: <TASK> ? __die+0x23/0x70 ? page_fault_oops+0x171/0x4e0 ? plist_add+0xbe/0x100 ? exc_page_fault+0x7c/0x180 ? asm_exc_page_fault+0x26/0x30 ? drm_dp_atomic_find_time_slots+0x5e/0x260 [drm_display_helper 0e67723696438d8e02b741593dd50d80b44c2026] ? drm_dp_atomic_find_time_slots+0x28/0x260 [drm_display_helper 0e67723696438d8e02b741593dd50d80b44c2026] compute_mst_dsc_configs_for_link+0x2ff/0xa40 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054] ? fill_plane_buffer_attributes+0x419/0x510 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054] compute_mst_dsc_configs_for_state+0x1e1/0x250 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054] amdgpu_dm_atomic_check+0xecd/0x1190 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054] drm_atomic_check_only+0x5c5/0xa40 drm_mode_atomic_ioctl+0x76e/0xbc0 ? _copy_to_user+0x25/0x30 ? drm_ioctl+0x296/0x4b0 ? __pfx_drm_mode_atomic_ioctl+0x10/0x10 drm_ioctl_kernel+0xcd/0x170 drm_ioctl+0x26d/0x4b0 ? __pfx_drm_mode_atomic_ioctl+0x10/0x10 amdgpu_drm_ioctl+0x4e/0x90 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054] __x64_sys_ioctl+0x94/0xd0 do_syscall_64+0x60/0x90 ? do_syscall_64+0x6c/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc RIP: 0033:0x7f4dad17f76f Code: 00 48 89 44 24 18 31 c0 48 8d 44 24 60 c7 04 24 10 00 00 00 48 89 44 24 08 48 8d 44 24 20 48 89 44 24 10 b8 10 00 00 00 0f 05 <89> c> RSP: 002b:00007ffd9ae859f0 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 000055e255a55900 RCX: 00007f4dad17f76f RDX: 00007ffd9ae85a90 RSI: 00000000c03864bc RDI: 000000000000000b RBP: 00007ffd9ae85a90 R08: 0000000000000003 R09: 0000000000000003 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000c03864bc R13: 000000000000000b R14: 000055e255a7fc60 R15: 000055e255a01eb0 </TASK> Modules linked in: rfcomm snd_seq_dummy snd_hrtimer snd_seq snd_seq_device ccm cmac algif_hash algif_skcipher af_alg joydev mousedev bnep > typec libphy k10temp ipmi_msghandler roles i2c_scmi acpi_cpufreq mac_hid nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_mas> CR2: 0000000000000008 ---[ end trace 0000000000000000 ]--- RIP: 0010:drm_dp_atomic_find_time_slots+0x5e/0x260 [drm_display_helper] Code: 01 00 00 48 8b 85 60 05 00 00 48 63 80 88 00 00 00 3b 43 28 0f 8d 2e 01 00 00 48 8b 53 30 48 8d 04 80 48 8d 04 c2 48 8b 40 18 <48> 8> RSP: 0018:ffff960cc2df77d8 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffff8afb87e81280 RCX: 0000000000000224 RDX: ffff8afb9ee37c00 RSI: ffff8afb8da1a578 RDI: ffff8afb87e81280 RBP: ffff8afb83d67000 R08: 0000000000000001 R09: ffff8afb9652f850 R10: ffff960cc2df7908 R11: 0000000000000002 R12: 0000000000000000 R13: ffff8afb8d7688a0 R14: ffff8afb8da1a578 R15: 0000000000000224 FS: 00007f4dac35ce00(0000) GS:ffff8afe30b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 000000010ddc6000 CR4: 00000000003506e0 With a second DP monitor connected, drm_atomic_state in dm atomic check sequence does not include the connector state for the old/existing/first DP monitor. In such case, dsc determination policy would hit a null ptr when it tries to iterate the old/existing stream that does not have a valid connector state attached to it. When that happens, dm atomic check should call drm_atomic_get_connector_state for a new connector state. Existing dm has already done that, except for RV due to it does not have official support of dsc where .num_dsc is not defined in dcn10 resource cap, that prevent from getting drm_atomic_get_connector_state called. So, skip dsc determination policy for ASICs that don't have DSC support. Cc: stable@vger.kernel.org # 6.1+ Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2314 Reviewed-by: Wayne Lin <wayne.lin@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23drm/amdgpu/soc21: update VCN 4 max HEVC encoding resolutionThong1-2/+2
commit 2f542421a47e8246e9b7d2c6508fe3a6e6c63078 upstream. Update the maximum resolution reported for HEVC encoding on VCN 4 devices to reflect its 8K encoding capability. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3159 Signed-off-by: Thong <thong.thai@amd.com> Reviewed-by: Ruijing Dong <ruijing.dong@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23drm/prime: Support page array >= 4GBPhilip Yang1-1/+1
commit b671cd3d456315f63171a670769356a196cf7fd0 upstream. Without unsigned long typecast, the size is passed in as zero if page array size >= 4GB, nr_pages >= 0x100000, then sg list converted will have the first and the last chunk lost. Signed-off-by: Philip Yang <Philip.Yang@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> CC: stable@vger.kernel.org Signed-off-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230821200201.24685-1-Philip.Yang@amd.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23drm/amd/display: Add align done checkZhikai Zhai1-1/+4
commit 94b38b895dec8c0ef093140a141e191b60ff614c upstream. [WHY] We Double-check link status if training successful, but miss the lane align status. [HOW] Add the lane align status check Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Zhikai Zhai <zhikai.zhai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23drm/msm: Wire up tlb opsRob Clark1-3/+29
commit 8c7bfd8262319fd3f127a5380f593ea76f1b88a2 upstream. The brute force iommu_flush_iotlb_all() was good enough for unmap, but in some cases a map operation could require removing a table pte entry to replace with a block entry. This also requires tlb invalidation. Missing this was resulting an obscure iova fault on what should be a valid buffer address. Thanks to Robin Murphy for helping me understand the cause of the fault. Cc: Robin Murphy <robin.murphy@arm.com> Cc: stable@vger.kernel.org Fixes: b145c6e65eb0 ("drm/msm: Add support to create a local pagetable") Signed-off-by: Rob Clark <robdclark@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/578117/ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23media: rc: bpf attach/detach requires write permissionSean Young3-5/+8
commit 6a9d552483d50953320b9d3b57abdee8d436f23f upstream. Note that bpf attach/detach also requires CAP_NET_ADMIN. Cc: stable@vger.kernel.org Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23pmdomain: mediatek: fix race conditions with genpdEugen Hristev1-8/+7
commit c41336f4d69057cbf88fed47951379b384540df5 upstream. If the power domains are registered first with genpd and *after that* the driver attempts to power them on in the probe sequence, then it is possible that a race condition occurs if genpd tries to power them on in the same time. The same is valid for powering them off before unregistering them from genpd. Attempt to fix race conditions by first removing the domains from genpd and *after that* powering down domains. Also first power up the domains and *after that* register them to genpd. Fixes: 59b644b01cf4 ("soc: mediatek: Add MediaTek SCPSYS power domains") Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20231225133615.78993-1-eugen.hristev@collabora.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23iio: pressure: bmp280: Add missing bmp085 to SPI id tableSam Protsenko1-0/+1
commit b67f3e653e305abf1471934d7b9fdb9ad2df3eef upstream. "bmp085" is missing in bmp280_spi_id[] table, which leads to the next warning in dmesg: SPI driver bmp280 has no spi_device_id for bosch,bmp085 Add "bmp085" to bmp280_spi_id[] by mimicking its existing description in bmp280_of_spi_match[] table to fix the above warning. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Fixes: b26b4e91700f ("iio: pressure: bmp280: add SPI interface driver") Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23iio: imu: bno055: serdev requires REGMAPRandy Dunlap1-0/+1
commit 35ec2d03b282a939949090bd8c39eb37a5856721 upstream. There are a ton of build errors when REGMAP is not set, so select REGMAP to fix all of them. Examples (not all of them): ../drivers/iio/imu/bno055/bno055_ser_core.c:495:15: error: variable 'bno055_ser_regmap_bus' has initializer but incomplete type 495 | static struct regmap_bus bno055_ser_regmap_bus = { ../drivers/iio/imu/bno055/bno055_ser_core.c:496:10: error: 'struct regmap_bus' has no member named 'write' 496 | .write = bno055_ser_write_reg, ../drivers/iio/imu/bno055/bno055_ser_core.c:497:10: error: 'struct regmap_bus' has no member named 'read' 497 | .read = bno055_ser_read_reg, ../drivers/iio/imu/bno055/bno055_ser_core.c: In function 'bno055_ser_probe': ../drivers/iio/imu/bno055/bno055_ser_core.c:532:18: error: implicit declaration of function 'devm_regmap_init'; did you mean 'vmem_map_init'? [-Werror=implicit-function-declaration] 532 | regmap = devm_regmap_init(&serdev->dev, &bno055_ser_regmap_bus, ../drivers/iio/imu/bno055/bno055_ser_core.c:532:16: warning: assignment to 'struct regmap *' from 'int' makes pointer from integer without a cast [-Wint-conversion] 532 | regmap = devm_regmap_init(&serdev->dev, &bno055_ser_regmap_bus, ../drivers/iio/imu/bno055/bno055_ser_core.c: At top level: ../drivers/iio/imu/bno055/bno055_ser_core.c:495:26: error: storage size of 'bno055_ser_regmap_bus' isn't known 495 | static struct regmap_bus bno055_ser_regmap_bus = { Fixes: 2eef5a9cc643 ("iio: imu: add BNO055 serdev driver") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Andrea Merello <andrea.merello@iit.it> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: linux-iio@vger.kernel.org Cc: <Stable@vger.kernel.org> Link: https://lore.kernel.org/r/20240110185611.19723-1-rdunlap@infradead.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23iio: accel: bma400: Fix a compilation problemMario Limonciello1-0/+2
commit 4cb81840d8f29b66d9d05c6d7f360c9560f7e2f4 upstream. The kernel fails when compiling without `CONFIG_REGMAP_I2C` but with `CONFIG_BMA400`. ``` ld: drivers/iio/accel/bma400_i2c.o: in function `bma400_i2c_probe': bma400_i2c.c:(.text+0x23): undefined reference to `__devm_regmap_init_i2c' ``` Link: https://download.01.org/0day-ci/archive/20240131/202401311634.FE5CBVwe-lkp@intel.com/config Fixes: 465c811f1f20 ("iio: accel: Add driver for the BMA400") Fixes: 9bea10642396 ("iio: accel: bma400: add support for bma400 spi") Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20240131225246.14169-1-mario.limonciello@amd.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23iio: core: fix memleak in iio_device_register_sysfsDinghao Liu1-1/+4
commit 95a0d596bbd0552a78e13ced43f2be1038883c81 upstream. When iio_device_register_sysfs_group() fails, we should free iio_dev_opaque->chan_attr_group.attrs to prevent potential memleak. Fixes: 32f171724e5c ("iio: core: rework iio device group creation") Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Link: https://lore.kernel.org/r/20231208073119.29283-1-dinghao.liu@zju.edu.cn Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23iio: magnetometer: rm3100: add boundary check for the value read from ↵zhili.liu1-2/+8
RM3100_REG_TMRC commit 792595bab4925aa06532a14dd256db523eb4fa5e upstream. Recently, we encounter kernel crash in function rm3100_common_probe caused by out of bound access of array rm3100_samp_rates (because of underlying hardware failures). Add boundary check to prevent out of bound access. Fixes: 121354b2eceb ("iio: magnetometer: Add driver support for PNI RM3100") Suggested-by: Zhouyi Zhou <zhouzhouyi@gmail.com> Signed-off-by: zhili.liu <zhili.liu@ucas.com.cn> Link: https://lore.kernel.org/r/1704157631-3814-1-git-send-email-zhouzhouyi@gmail.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23staging: iio: ad5933: fix type mismatch regressionDavid Schiller1-1/+1
commit 6db053cd949fcd6254cea9f2cd5d39f7bd64379c upstream. Commit 4c3577db3e4f ("Staging: iio: impedance-analyzer: Fix sparse warning") fixed a compiler warning, but introduced a bug that resulted in one of the two 16 bit IIO channels always being zero (when both are enabled). This is because int is 32 bits wide on most architectures and in the case of a little-endian machine the two most significant bytes would occupy the buffer for the second channel as 'val' is being passed as a void pointer to 'iio_push_to_buffers()'. Fix by defining 'val' as u16. Tested working on ARM64. Fixes: 4c3577db3e4f ("Staging: iio: impedance-analyzer: Fix sparse warning") Signed-off-by: David Schiller <david.schiller@jku.at> Link: https://lore.kernel.org/r/20240122134916.2137957-1-david.schiller@jku.at Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2026-05-11 07:51:39 +0300