| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
commit 934b7778aa7b7c8f6bb073d2a73ba3674885bae0 upstream.
The Hyper-V synthetic HID host supplies SYNTH_HID_INITIAL_DEVICE_INFO
messages that contain a HID descriptor followed by the report descriptor
bytes. mousevsc_on_receive_device_info() trusts bLength and
wDescriptorLength without checking that the received packet contains both
byte ranges.
A malformed host or backend message can therefore make the guest read
past the received VMBus packet while copying the report descriptor. Pass
the received initial-device-info size into the parser and reject
descriptor lengths that exceed the packet.
Impact: A malicious Hyper-V host or backend can crash a guest by sending
a short initial device-info message with an oversized HID report
descriptor length.
Fixes: b95f5bcb811e ("HID: Move the hid-hyperv driver out of staging")
Cc: stable@vger.kernel.org
Assisted-by: Codex:gpt-5-5-xhigh
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ad8fb82b04422f49530d2aa2753cc81d1c60102c upstream.
enable_sensor_store() can call set_power_report_state(), which
dereferences sensor_inst->power_state and sensor_inst->report_state.
These pointers refer to entries in sensor_inst->fields.
Create the field attributes before exposing the enable_sensor sysfs
attribute, so enable_sensor cannot be accessed before the state it
depends on has been initialized.
On remove, delete enable_sensor before freeing the field attributes,
so a concurrent sysfs write cannot dereference freed memory through
power_state or report_state.
Reported-by: Sashiko AI Review <sashiko-bot@kernel.org>
Link: https://sashiko.dev/#/patchset/20260623021950.1736413-1-haoxiang_li2024@163.com?part=1
Fixes: 4a7de0519df5 ("HID: sensor: Custom and Generic sensor support")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 28abce951343fcec26e397610868efa4e1395c3f upstream.
When fetch_item() is called by hid_scan_report() on an item with
HID_ITEM_TAG_LONG, it stores a pointer to the item data in
item->data.longdata instead of storing a value directly in
item->data.{u8/u16/u32}.
When item_udata() or item_sdata() encounters such an item, it incorrectly
assumes that the item is in short format, and therefore returns the lower
part of a kernel pointer reinterpreted as a number.
When a HID device is connected whose descriptor contains a
HID_GLOBAL_ITEM_TAG_REPORT_SIZE encoded in long format with size=4, this
causes the lower half of a kernel pointer to be printed into dmesg as a
number, like this:
hid (null): invalid report_size 107953555
To fix it, let item_udata() and item_sdata() verify that the item is in
short format.
Note that this bug only affects hid_scan_report(), while the main parsing
pass hid_parse_collections() will always bail out when encountering a long
item.
Sidenote: There are currently no users of data.longdata; maybe we should
just remove any parsing of long-format descriptors as a follow-up.
Fixes: 3dc8fc083dbf ("HID: Use hid_parser for pre-scanning the report descriptors")
Cc: stable@vger.kernel.org
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 27b376b945c0aac46fcdfcc950b14a85b874b557 upstream.
joycon_ctlr_read_handler() casts an incoming HID input report to
struct joycon_input_report and parses it, guarding the cast only with a
12-byte length check:
if (size >= 12) /* make sure it contains the input report */
joycon_parse_report(ctlr, (struct joycon_input_report *)data);
struct joycon_input_report is 49 bytes: a 13-byte header followed by a
union whose IMU arm is 36 bytes. For an IMU report joycon_parse_report()
-> joycon_parse_imu_report() walks that union (struct offsets 13..48),
so a report of exactly 12 bytes with data[0] == JC_INPUT_IMU_DATA passes
the guard yet is read up to 37 bytes past its declared length. The
over-read bytes are decoded into accelerometer/gyroscope values and
forwarded to userspace through the "(IMU)" input device, leaking
driver-internal memory. data[0] and size are fully controlled by a
malicious or spoofed Joy-Con/Pro Controller.
Receive buffers are sized to the maximum report length, so this is an
over-read within the allocation rather than a slab OOB, but the decoded
bytes still reach userspace.
The sibling subcmd path in joycon_ctlr_handle_event() already bounds the
same cast correctly:
if (size < sizeof(struct joycon_input_report) ||
data[0] != JC_INPUT_SUBCMD_REPLY)
break;
Use the same sizeof(struct joycon_input_report) bound here.
Fixes: 2af16c1f846b ("HID: nintendo: add nintendo switch controller driver")
Cc: stable@vger.kernel.org
Signed-off-by: Ibrahim Hashimov <security@auditcode.ai>
Assisted-by: AuditCode-AI:2026.07
Reviewed-by: Silvan Jegen <s.jegen@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 410c44b1096789d0c40fbee706520e981dba7bc1 ]
The internal keyboard on the HONOR ZQC-P (HONOR MagicBook Pro 14 2026)
does not work after boot.
Using the kernel command line 'i8042.dumbkbd=1' makes the keyboard
functional, but the CapsLock LED does not work. Adding the
'atkbd_deactivate_fixup' quirk fixes the keyboard and CapsLock LED
natively without requiring boot parameters.
DMI: HONOR ZQC-P/ZQC-P-PCB, BIOS 1.09 03/19/2026
Fixes: 9cf6e24c9fbf ("Input: atkbd - do not skip atkbd_deactivate() when skipping ATKBD_CMD_GETID")
Signed-off-by: Donglin Lyu <donglin_lyu@outlook.com>
Tested-by: Ruslan Shevchenko <adefka@gmail.com>
Link: https://patch.msgid.link/20260801151115.52709-1-donglin_lyu@outlook.com
Cc: stable@vger.kernel.org
[dtor: keep all HONOR entries together]
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 2aaf33c6e1e82561d7dce2345298a985a2483266 ]
After commit 9cf6e24c9fbf17e52de9fff07f12be7565ea6d61 ("Input: atkbd -
do not skip atkbd_deactivate() when skipping ATKBD_CMD_GETID"), HONOR
FMB-P, aka HONOR MagicBook Pro 14 2025's internal keyboard stops
working. Adding the atkbd_deactivate_fixup quirk fixes it.
DMI: HONOR FMB-P/FMB-P-PCB, BIOS 1.13 05/08/2025
Fixes: 9cf6e24c9fbf17e52de9fff07f12be7565ea6d61 ("Input: atkbd - do not skip atkbd_deactivate() when skipping ATKBD_CMD_GETID")
Reported-by: Mikura Kyouka <mikurakyouka@aosc.io>
Reported-by: foad.elkhattabi <foad.elkhattabi@gmail.com>
Signed-off-by: Cryolitia PukNgae <cryolitia.pukngae@linux.dev>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Link: https://patch.msgid.link/20251022-honor-v1-1-ff894ed271a9@linux.dev
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Stable-dep-of: 410c44b10967 ("Input: atkbd - skip deactivate for HONOR ZQC-P")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a13cdb19fcb223ed41bdab3bab42b98dba87e90b upstream.
hid_set_field() hands field->usage + offset to hid_dump_input() before
the guard that bounds offset:
hid_dump_input(field->report->device, field->usage + offset, value);
if (offset >= field->report_count) {
hid_err(...);
return -1;
}
Under CONFIG_DEBUG_FS hid_dump_input() dereferences that pointer, with
buf = hid_resolv_usage(usage->hid, NULL). The usage[] array is
allocated inline with the hid_field in hid_register_field() and holds
field->maxusage entries, so an offset past it reads off the end of the
kvzalloc()ed allocation and into a neighbouring object. Had the guard
run first, offset < report_count <= maxusage would already have confined
the pointer to the array.
A caller supplies such an offset today. picolcd_fb_send_tile()
validates only report->maxfield before issuing
hid_set_field(report->field[0], 11 + i, ...) for i = 0..31, so its
offsets are fixed at 11..42 and are never checked against the bound
field. When the device registers that field with fewer usages, the
framebuffer deferred-io work drives the read on every tile. KASAN
reports a 4-byte slab-out-of-bounds read in hid_dump_input() below
hid_set_field(), and the same boot logs "offset (1) exceeds
report_count (1)" from the guard that runs only afterwards.
Move the hid_dump_input() call below the guard. Because
field->maxusage >= field->report_count, the guard then establishes that
field->usage + offset lies inside the array before it is dereferenced,
for every caller and without changing behaviour on the valid path.
Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Federico Kirschbaum <federico.kirschbaum@xbow.com>
Reported-by: Baul Lee <baul.lee@xbow.com>
Cc: stable@vger.kernel.org
Signed-off-by: Baul Lee <baul.lee@xbow.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d93ba918a185aca2594da63e92fdc5495b559c0f upstream.
It is currently possible for a malicious or misconfigured USB device to
cause an out-of-bounds (OOB) read when submitting reports using
DOUBLE_REPORT_ID by specifying a large report length and providing a
smaller one.
Let's prevent that by comparing the specified report length with the
actual size of the data read in from userspace. If the actual data
length ends up being smaller than specified, we'll politely warn the
user and prevent any further processing.
Signed-off-by: Lee Jones <lee@kernel.org>
Reviewed-by: Günther Noack <gnoack@google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0af3b89705688af01aa06025b84fa7a1e06ba6cc upstream.
magicmouse_input_mapping() caches the first hid_input's input_dev in
msc->input while the report descriptor is parsed, and the rest of the
driver treats a non-NULL msc->input as proof that an input device was
registered.
That does not hold on the hid-input error path. If hidinput_connect()
fails -- for instance because input_register_device() returns an error --
it unwinds through hidinput_disconnect(), which frees every input_dev it
created, including the one cached in msc->input.
The failure does not abort the probe. hid_connect() only skips the claim:
if ((connect_mask & HID_CONNECT_HIDINPUT) && !hidinput_connect(hdev,
connect_mask & HID_CONNECT_HIDINPUT_FORCE))
hdev->claimed |= HID_CLAIMED_INPUT;
and the "device has no listeners" bailout below it does not fire for this
driver, which sets ->raw_event; on the USB Magic Mouse 2 / Magic Trackpad
2 paths hidraw and hiddev are claimed as well. hid_hw_start() therefore
returns 0 and magicmouse_probe() continues with msc->input pointing at
freed memory. Being non-NULL, it passes the "input not registered" check
in probe and the NULL checks in ->raw_event and ->event, so the next
input report dereferences freed memory.
Clear msc->input when the HID core did not claim an input device, so the
existing NULL checks cover this case as well.
Fixes: f1a9a149abc8 ("HID: magicmouse: fix race between input_register() and probe()")
Link: https://lore.kernel.org/linux-input/20260728185542.65F091F000E9@smtp.kernel.org/
Cc: stable@vger.kernel.org
Signed-off-by: Jose Villaseñor Montfort <pepemontfort@gmail.com>
Reviewed-by: Alec Hall <signshop.alec@gmail.com>
Tested-by: Alec Hall <signshop.alec@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a1556b48efc157fdda07b52ecc56c7bd1e1786f0 upstream.
The Apple Magic Trackpad 2 (USB-C) reports a wildly wrong battery
capacity over Bluetooth, for example a constant 4% for a pack that is
actually at 74%.
The device's battery input report (0x90) is laid out as
[report-id][status][charge]. hid-input's synchronous capacity query,
hidinput_query_battery_capacity(), assumes the common
[report-id][capacity] layout and returns buf[1], which for this device
is the status byte rather than the charge (buf[2]).
magicmouse_fetch_battery(), which requests the battery report through
hid_hw_request() so the reply is decoded via the report descriptor at
the correct field offset, is gated to the USB models and never runs
over Bluetooth. The device does not push battery reports on its own
either, except a single one at connect time, which is delivered while
probe holds driver_input_lock and is silently dropped. All userspace
reads therefore go through the misparsing query, and the device is
stuck reporting its status byte as the capacity.
Enabling the fetch for Bluetooth is not sufficient on its own: user
space reacts to the power_supply registration immediately, so a query
is typically already in flight when the fetch reply is parsed.
hidinput_get_battery_property() stores the query result and marks the
battery as queried without rechecking whether a report arrived while
it was waiting, clobbering the just-reported correct value with the
misparsed one.
Fix this by adding HID_BATTERY_QUIRK_AVOID_QUERY for the Bluetooth
Magic Trackpad USB-C so the misparsing query path is never used, and
by fetching the battery at the end of probe for this device. hidp has
no asynchronous request() callback, so the fetch is serviced
synchronously via __hid_request() while probe still holds
driver_input_lock; call hid_device_io_start() first so the reply is
processed instead of being discarded.
Tested with a Magic Trackpad USB-C (004c:0324) over Bluetooth on
6.18.37: the reported capacity now matches the device (verified against
a raw GET_REPORT of report 0x90) and updates on reconnect.
Fixes: 87a2f10395c8 ("HID: magicmouse: Apple Magic Trackpad 2 USB-C driver support")
Cc: stable@vger.kernel.org
Signed-off-by: Andrei Fed <andfed.net@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 737a3b535247226f6e1a7988fd9d6e63e7d6fc71 upstream.
When fuzzing the nvme target code, I tripped a kernel warning in
nvmet_tcp_map_data() because the length passed into the allocator is
controlled by the remote initiator.
A remote initiator that sends a command with an SGL claiming a huge
number, can create a scatterlist and iovec allocation of over 1 million
entries, which causes the backing kmalloc call to exceed MAX_PAGE_ORDER
and then the page allocator will trip on a WARN_ON_ONCE_GFP() message:
WARNING: mm/page_alloc.c:5280 __alloc_frozen_pages_noprof
Workqueue: nvmet_tcp_wq nvmet_tcp_io_work
...
sgl_alloc_order
nvmet_tcp_map_data
nvmet_tcp_try_recv_pdu
As it's never good to trip a kernel warning remotely due to many systems
having panic-on-warn enabled, let's silence it by just add GFP_NOWARN to
the allocation flags.
Assisted-by: gkh_clanker_2000
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ba98d6796d12258e837ece065d2ecb59d76ce4ff upstream.
nvmet_fc_alloc_ls_iodlist() advances iod while initializing the LS IOD
array. If an rqstbuf allocation or response buffer DMA mapping fails,
the unwind loop decrements iod past the start of the array. The final
kfree(iod) therefore frees an address before the allocated object.
This can be reproduced with nvme-fcloop and failslab by setting
fail-nth to 6 before creating a target port. KASAN reports:
BUG: KASAN: invalid-free in nvmet_fc_register_targetport
Free of addr ffff88816cf8ff48 by task nvmet_fail_nth/9552
Free the original allocation base stored in tgtport->iod instead. With
this fix applied, the same sysfs write with fail-nth=6 returns -ENOMEM
without any KASAN report.
Fixes: c53432030d86 ("nvme-fabrics: Add target support for FC transport")
Cc: stable@vger.kernel.org
Reviewed-by: Maurizio Lombardi <mlombard@redhat.com>
Assisted-by: Codex:gpt-5
Signed-off-by: Jiang HongHui <jiang_hh2019@163.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3ddcfb013322aa37eaa7a0d344b73079c38dfa21 upstream.
nvmet_execute_auth_receive() allocates the response buffer with kmalloc()
sized by the host-supplied AUTH_RECEIVE allocation length, but the
DH-HMAC-CHAP builders write only a fixed-size message into it. The full
allocation length is then copied to the wire by nvmet_copy_to_sgl(), so a
remote initiator receives the bytes past the built message -- up to nearly
a page of uninitialized slab -- during the pre-authentication handshake.
Allocate the buffer with kzalloc() so the unwritten tail is zeroed before
it is sent; conforming responses are unaffected.
Fixes: db1312dd9548 ("nvmet: implement basic In-Band Authentication")
Cc: stable@vger.kernel.org
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c83e79c0842ed29860648bcce5022ef0ba5001c6 upstream.
byd_disconnect() uses timer_delete() before freeing the driver's private
data. This does not wait for a running byd_clear_touch() callback, which
dereferences the private data and its psmouse pointer. A callback racing
with disconnect can therefore access the private data after it has been
freed. The timer can also still be re-armed by byd_process_byte() while
the disconnect is in progress.
Use timer_shutdown_sync() before freeing the private data: it waits for
a running callback and turns any later re-arm attempt into a no-op.
Fixes: 2d5f5611dd0d ("Input: byd - enable absolute mode")
Cc: stable@vger.kernel.org
Signed-off-by: Linmao Li <lilinmao@kylinos.cn>
Link: https://patch.msgid.link/20260720061259.1601281-1-lilinmao@kylinos.cn
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
[ changed `del_timer()` to `timer_shutdown_sync()` since 6.12 predates the `del_timer()` → `timer_delete()` rename ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5cdcca5d62a66eda6b774110a44cba67bc1a8d1d upstream.
st21nfca_tm_recv_atr_req() checks that the received ATR_REQ frame is at
least ST21NFCA_ATR_REQ_MIN_SIZE and that the self-declared atr_req->length
is at least sizeof(struct st21nfca_atr_req), but never checks that
atr_req->length does not exceed the actual received length (skb->len).
st21nfca_tm_send_atr_res() then trusts the declared length:
gb_len = atr_req->length - sizeof(struct st21nfca_atr_req);
...
memcpy(atr_res->gbi, atr_req->gbi, gb_len);
so an RF peer that sends a short frame but sets atr_req->length larger
than the frame makes gb_len exceed the general bytes actually present,
and the memcpy reads out of bounds past the received skb. Those bytes are
placed in the ATR_RES and sent back to the peer (kernel-memory disclosure
to a proximity attacker); a larger declared length is an out-of-bounds
read (DoS).
Reject frames whose declared length exceeds the received length. The
adjacent nfc_tm_activated() path in the same function already derives its
general-bytes length from skb->len rather than the declared field.
Found by 0sec (https://0sec.ai) using automated source analysis; the
missing bound is evident from source. Compile-tested.
Fixes: 1892bf844ea0 ("NFC: st21nfca: Adding P2P support to st21nfca in Initiator & Target mode")
Cc: stable@vger.kernel.org
Assisted-by: 0sec:claude-opus-4-8
Signed-off-by: Doruk Tan Ozturk <doruk@0sec.ai>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260711071301.58071-1-doruk@0sec.ai
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5718fc62198c38c2de5316020a90506f9e75e0bb upstream.
pn53x_common_clean() purges resp_q before freeing the common PN533 state,
but it leaves fragment_skb untouched. The fragmentation helpers queue
transmit fragments there while sending large initiator or target-mode
frames, and those skbs remain owned by the driver until they are sent or
discarded.
If the device is removed while fragments are still queued, the common
cleanup path frees the PN533 state without releasing the queued fragment
skbs, leaking them.
Purge fragment_skb during cleanup alongside resp_q.
Fixes: 963a82e07d4e ("NFC: pn533: Split large Tx frames in chunks")
Cc: stable@vger.kernel.org
Signed-off-by: Xu Rao <raoxu@uniontech.com>
Link: https://patch.msgid.link/2D896607CAE4408E+20260720021444.3362044-1-raoxu@uniontech.com
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 25519469972ef57c3edb1805dabd6c5612b90211 upstream.
microread_target_discovered() parses target discovery payloads from
skb->data according to the HCI gate. The fixed field offsets and UID
copies were checked only against the destination nfc_target buffers, not
against the actual skb length.
Validate that each gate-specific payload contains the fixed fields and
UID bytes before reading or copying them.
Fixes: cfad1ba87150 ("NFC: Initial support for Inside Secure microread")
Cc: stable@vger.kernel.org
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260723103508.1-microread-v2-pengpeng@iscas.ac.cn
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7ad21dcfeb5181af0c3ee2608808c0c0a5283aa1 upstream.
fdp_nci_i2c_read() takes the next packet length from two device-supplied
bytes and never validates it. The value is a u16 used as the
i2c_master_recv() count into a 261-byte on-stack buffer: a malicious,
counterfeit or malfunctioning controller (or an i2c bus interposer) can
drive it far past the buffer for a stack out-of-bounds write that
clobbers the canary and return address, or below the minimum frame size
(directly, or by truncating the computed sum) so the header/LRC strip
and the next length read run past a short receive. Reject a length
outside [FDP_NCI_I2C_MIN_PAYLOAD, FDP_NCI_I2C_MAX_PAYLOAD], as a
corrupted packet already is, and force resynchronization.
The same loop allocates one data skb per iteration and assumes a length
packet followed by a data packet; a device that sends two data packets
in one call leaks the first skb when the second allocation overwrites
it. Free a previously allocated skb before allocating the next.
Fixes: a06347c04c13 ("NFC: Add Intel Fields Peak NFC solution driver")
Cc: stable@vger.kernel.org
Suggested-by: Simon Horman <horms@kernel.org>
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Link: https://patch.msgid.link/20260616-b4-disp-b1f8ab4c-v2-1-2d1fe5955325@proton.me
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 2a9c5154a5650c09ad44ff5e1dff74754e15a3c6 ]
dGPUs with an internal PCIe switch expose graphics functions below the
switch downstream port. The automatic ASPM check uses the display
endpoint and evaluates the internal link instead of the host link.
Use the switch upstream port for the check and report the selected
link.
Fixes: 0ab5d711ec74 ("drm/amd: Refactor `amdgpu_aspm` to be evaluated per device")
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 4e0d6f2876e704fff707b18c40dbd383aea4a1c9)
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 2f9a5c0f018d4a1586ee892f81f1383219676415 ]
COLOR_SPACE_YCBCR2020_TYPE, which is selected for
COLOR_SPACE_2020_YCBCR_LIMITED color_space, has coefficients that are
incorrect for limited-range output. Its luma and chroma scaling is
full-range so output is too bright and colors are incorrect.
COLOR_SPACE_YCBCR2020_TYPE is closer to a full-range conversion matrix with
incorrect luma offset, so correct the luma offset for full-range and rename
it to COLOR_SPACE_YCBCR2020_FULL_TYPE.
Add COLOR_SPACE_YCBCR2020_LIMITED_TYPE with correct scaling and range for
limited-range output.
Fix related functions so COLOR_SPACE_YCBCR2020_LIMITED_TYPE and
COLOR_SPACE_YCBCR2020_FULL_TYPE are correctly selected based on
dc_color_space.
Derivation of both matrices follows ITU-T H.273:
Table 4, MatrixCoefficients 9, BT.2020-NCL weights:
KR = 0.2627, KB = 0.0593, KG = 1 - KR - KB = 0.6780.
Equations 45-47 in matrix form:
[ KR KG KB 0 ]
M2020_NCL = [ -KR/(2(1-KB)) -KG/(2(1-KB)) 1/2 0 ]
[ 1/2 -KG/(2(1-KR)) -KB/(2(1-KR)) 0 ]
[ 0 0 0 1 ]
Limited and Full transforms based on equations 30-32 and 36-38 with bit
depth 10, normalized by 1023:
[ 876/1023 0 0 64/1023 ]
MLimited = [ 0 896/1023 0 512/1023 ]
[ 0 0 896/1023 512/1023 ]
[ 0 0 0 1 ]
[ 1023/1023 0 0 0 ]
MFull = [ 0 1023/1023 0 512/1023 ]
[ 0 0 1023/1023 512/1023 ]
[ 0 0 0 1 ]
M2020_NCL_Limited = MLimited x M2020_NCL
M2020_NCL_Full = MFull x M2020_NCL
The upper three rows of M2020_NCL_* are stored in CR, Y, CB order. Each
M2020_NCL_* value is stored as Round(value * 8192) in its 16-bit
two's-complement representation.
Fixes: 973a9c810c78 ("drm/amd/display: Fix COLOR_SPACE_YCBCR2020_TYPE matrix")
Assisted-by: OpenAI-Codex:GPT-5.6-Sol
Tested-by: Igor Paunovic <royalnet026@gmail.com>
Tested-by: Satyajit Roy <sroy14@alum.utk.edu>
Signed-off-by: Nathan Lucas <nlucasgit@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3b906e1dc7e3c9ff9f7940f6828b367a6a9ec73c)
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 07bc2dcbcf403d47d6f305ef7f0d3d489491c5fb ]
[Why]
BT2020 YCbCr input is not handled properly when full range
quantization is used and limited range is not supported at all.
[How]
- Add enums for BT2020 YCbCr limited/full range
- Add limited range CSC matrix
Reviewed-by: Krunoslav Kovac <krunoslav.kovac@amd.com>
Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Robert Mader <robert.mader@collabora.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: 2f9a5c0f018d ("drm/amd/display: fix BT.2020 YCbCr limited output CSC matrix")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit c770ef19673fb1defcbde2ee2b91c3c89bfcf164 ]
disable ASPM with some ASICs on some specific platforms.
required from PCIe controller owner.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: 2a9c5154a565 ("drm/amdgpu: check ASPM on the dGPU host link")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 16b0798024c0e9117e395829ddbbe70981c79d9c upstream.
Unlike the channel_program struct, which covers synchronous I/O
submissions and asynchronous interrupts, the CRW region relies
exclusively on asynchronous events coming from hardware.
Implement a lock to manage the list of those payloads, to ensure
they are read cohesively.
Fixes: 3f02cb2fd9d2 ("vfio-ccw: Wire up the CRW irq and CRW region")
Cc: stable@vger.kernel.org
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
[farman@linux.ibm.com: resolved merge conflict]
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4f6fdc6e1a7fbfa36b945af33c65a417948feac0 upstream.
Sashiko pointed out that get_guest_idal() unconditionally calculates
the length of the IDAL presuming everything is a Format-2 IDAW.
The output of vfio-ccw is always Format-2, but the input can be either
Format-1 (31-bit addresses) or Format-2 (64-bit addresses). As a result,
the size of the guest IDAL may be incorrect and should be trimmed down.
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Link: https://lore.kernel.org/r/20260720203400.7328E1F000E9@smtp.kernel.org/
Fixes: 1b676fe3d9d3 ("vfio/ccw: handle a guest Format-1 IDAL")
Cc: stable@vger.kernel.org
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
[farman@linux.ibm.com: resolved merge conflict]
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 565bef268d75bf7df665bce6923a88cd0eb74592 upstream.
The first IDAW in a list does not need to be on a 2K/4K boundary
like all others, and so is read separately to accurately calculate
the size of the buffer needed to read the full IDAL.
Verify that the address found in the first IDAW is unchanged between
reads, to ensure a consistent set of IDAWs being worked with.
Fixes: 01aa26c672c0 ("s390/cio: Combine direct and indirect CCW paths")
Cc: stable@vger.kernel.org
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
[farman@linux.ibm.com: resolved merge conflict]
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 74186c2968f8f756ac3226b545b598457c910c75 upstream.
The routine cp_free() is called to unpin/free any memory once an I/O
is completed successfully, or if cp_prefetch() fails. But if cp_init()
fails, and cp->initialized is not enabled, the same routine cannot be
used to free all the memory.
An attempt to address this exists in ccwchain_handle_ccw(), where a
single call to ccwchain_free() is made for the currently-processed
CCW segment. But this will leak other segments (created as a result
of a Transfer in Channel) that had been allocated as part of the same
channel program.
Address this by performing the cleanup outside of the recursive
ccwchain_handle_ccw()/ccwchain_loop_tic() logic.
Fixes: 8b515be512a2 ("vfio-ccw: Fix memory leak and don't call cp_free in cp_init")
Cc: stable@vger.kernel.org
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
[farman@linux.ibm.com: resolve build error]
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 600411ea1f2443fdf5b1af9b6480f616d7aff9d0 upstream.
ioh_irq_type() is registered as the irq_chip .irq_set_type callback and
takes chip->spinlock with spin_lock_irqsave(). This callback is reached
from __setup_irq() -> __irq_set_trigger() -> chip->irq_set_type() while
the caller holds desc->lock, a raw_spinlock_t, with hardirqs disabled.
That context is not sleepable, but on PREEMPT_RT a regular spinlock_t is
an rtmutex-backed sleeping lock, so acquiring it there is invalid.
ioh_irq_enable() and ioh_irq_disable() take the same lock from the
.irq_enable/.irq_disable callbacks, which are likewise invoked with
desc->lock held.
Convert the register lock to raw_spinlock_t. The same lock also
serializes the GPIO direction/value callbacks and the suspend/resume
register save/restore, and those critical sections only perform short
sequences of MMIO register accesses (ioread32()/iowrite32()); the
.irq_set_type callback additionally emits a dev_warn() on an unsupported
type. None of these are sleepable operations, so keeping this register
lock non-sleeping is appropriate for the irqchip callbacks and does not
change the GPIO-side locking contract.
This is the same fix as commit a02b8950d619 ("gpio: pch: use
raw_spinlock_t for the register lock"); this driver shares the same
structure as gpio-pch.
Fixes: 54be566317b6 ("gpio-ml-ioh: Support interrupt function")
Cc: stable@vger.kernel.org
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260731032747.2987292-1-junjie.cao@intel.com
Signed-off-by: Junjie Cao <junjie.cao@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 95491fb05105b61050cb623a5e0227eb26aa3525 upstream.
null_zone_no() does sect >> ilog2(dev->zone_size_sects). When
zone_size_sects is 0, ilog2(0) returns -1, producing shift exponent -1
which UBSAN reports as shift-out-of-bounds.
UBSAN: shift-out-of-bounds in drivers/block/null_blk/zoned.c:21:14
shift exponent -1 is negative
Call Trace:
null_zone_no drivers/block/null_blk/zoned.c:21 [inline]
null_process_zoned_cmd+0xf76/0xf80 drivers/block/null_blk/zoned.c:728
null_handle_cmd drivers/block/null_blk/main.c:1455 [inline]
null_queue_rq+0x8bc/0xe70 drivers/block/null_blk/main.c:1703
__blk_mq_issue_directly block/blk-mq.c:2694 [inline]
blk_mq_try_issue_directly+0x3f4/0x880 block/blk-mq.c:2754
blk_mq_submit_bio+0x20c0/0x2a40 block/blk-mq.c:3208
submit_bio_noacct_nocheck+0x2f4/0xa40 block/blk-core.c:790
block_read_full_folio+0x7a6/0x810 fs/buffer.c:2463
filemap_read_folio+0x12c/0x3a0 mm/filemap.c:2510
read_part_sector+0xb6/0x2b0 block/partitions/core.c:724
adfspart_check_ICS+0xb1/0x960 block/partitions/acorn.c:357
check_partition block/partitions/core.c:143 [inline]
blk_add_partitions block/partitions/core.c:591 [inline]
bdev_disk_changed+0x851/0x17a0 block/partitions/core.c:695
blkdev_get_whole+0x372/0x510 block/bdev.c:751
add_disk_final block/genhd.c:412 [inline]
add_disk_fwnode+0x24b/0x3a0 block/genhd.c:606
null_add_dev+0x130b/0x1d70 drivers/block/null_blk/main.c:2052
nullb_device_power_store+0x240/0x380 drivers/block/null_blk/main.c:501
configfs_write_iter+0x337/0x430 fs/configfs/file.c:229
Syzkaller triggers this by creating a zoned null_blk device via
configfs. The Call Trace shows configfs_write_iter in configfs/file.c
handling a write to power file, which calls nullb_device_power_store in
main.c, which calls null_add_dev in main.c, which calls add_disk in
genhd.c, which triggers partition scan via bdev_disk_changed in
partitions/core.c.
A zoned null_blk device with zone_size 0 should not be legal. Existing
code tries to reject it via is_power_of_2() check in zoned.c and
!zone_size check in main.c, but syzkaller can still reach
null_zone_no() with zone_size_sects 0 via two paths:
1. Direct 0 via configfs: zone_size attribute store in main.c has
NULLB_DEVICE_ATTR(zone_size, ulong, NULL) with no validation callback,
so echo 0 > zone_size succeeds before power store. If zoned is false
at power store time, the !zone_size check in main.c is skipped, and
later zoned set true leaves zone_size 0.
2. Large value overflow: mb_to_sects() in zoned.c does
(sector_t)mb * SZ_1M >> SECTOR_SHIFT which is mb * 2048. If mb is
1UL << 53 (9PB), mb * 2048 overflows 64-bit to 0. The value is
power-of-two so is_power_of_2() passes, but mb_to_sects() returns 0.
Check for zero zone_size explicitly in null_init_zoned_dev() in
zoned.c, returning -EINVAL with "must be non-zero power-of-two".
Check for zero zone_size_sects after mb_to_sects() conversion,
returning -EINVAL for overflow case. Keep defensive check in
null_zone_no() returning 0 for zero sectors to avoid shift out-of-bounds
even if zero slips through.
This change should be safe because zone_size is set once in
null_init_zoned_dev() under device lock and never changes after, and 0
is never valid for a zoned device. Returning -EINVAL at init time fails
device creation early with clear error, while defensive return 0 in
null_zone_no() makes zoned command fail via offline zone check.
No new locking is introduced.
Reported-by: syzbot+abd6a8dca0f2b7726060@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=abd6a8dca0f2b7726060
Link: https://lore.kernel.org/all/6a75205c.01d0871a.3a0d52.0033.GAE@google.com/
Fixes: 8a3cf049af68 ("null_blk: add zoned block device emulation")
Cc: stable@vger.kernel.org
Assisted-by: Hermes:muse-spark-1.2 syzkaller
Signed-off-by: Rik van Riel <riel@surriel.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://patch.msgid.link/20260808114239.69167f68@fangorn
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 246ac114f485c2affb454240f3ea4fabfce22456 ]
sc16is7xx_handle_tx() currently requests the THRI enable only after it has
filled the TX FIFO. The request is asynchronous because the IER update is
performed later by reg_work.
The SC16IS7xx generates a THRI interrupt when the TX FIFO crosses its
trigger level. If the FIFO drains past that level before reg_work enables
THRI, the chip does not generate a new interrupt. Characters remain queued
indefinitely even though the hardware FIFO is empty.
This was observed on an SC16IS752 while both UART channels were active.
During the stall the software TX buffer remained non-empty while TXLVL
reported 64 bytes free, LSR reported THR and transmitter empty, IER had
THRI enabled, and IIR reported no interrupt pending.
Enable THRI synchronously before filling the FIFO so the threshold crossing
cannot be missed.
Fixes: cc4c1d05eb10 ("sc16is7xx: Properly resume TX after stop")
Cc: stable <stable@kernel.org>
Signed-off-by: Luca Fresi <luca.fresi@bithiatec.com>
Link: https://patch.msgid.link/20260721222404.204746-1-luca.fresi@bithiatec.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 0f4f88bfd7e7bf3f3293045fffdc63586b0a889f ]
Guards can help to make the code more readable, so use them wherever they
do so.
In sc16is7xx_port_irq(), labels and 'rc' locals are eliminated completely.
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://patch.msgid.link/20251027142957.1032073-6-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 246ac114f485 ("serial: sc16is7xx: enable THRI before filling TX FIFO")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit d9b2d7ddbb973b981c20b21e9228581bb156f66f ]
This mutex is used as a lock when accessing registers that share the same
address space, not necessarily EFR registers.
For example, address 0x06 is shared by MSR, TCR and XOFF1 registers,
independently of EFR.
Rename the mutex with a more generic name to avoid misinterpreting its
usage.
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://patch.msgid.link/20251027142957.1032073-3-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 246ac114f485 ("serial: sc16is7xx: enable THRI before filling TX FIFO")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit d2e8590fd1048c5c0dba160edc6a48ee8305a1f0 ]
Now that bit definition comments were cleaned up, convert bitmask
definitions to use BIT() macro for clarity.
Convert SC16IS7XX_IIR_ID_MASK to use GENMASK() macro -
- while at that, realign comments.
Compose SC16IS7XX_LSR_BRK_ERROR_MASK using aforementioned constants,
instead of open-coding it, and remove now unneeded comments.
Signed-off-by: Lech Perczak <lech.perczak@camlingroup.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/8b45a01e-7cc5-4d53-b467-c6680bc51ef4@camlingroup.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 246ac114f485 ("serial: sc16is7xx: enable THRI before filling TX FIFO")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit eccdb0fd1c340155666533f5c60c5229d370baab ]
Comments attached to bits 0 and 1 incorrectly referenced bits 2 and 3,
which don't match the datasheet - fix them.
At the same time remove comments for individual constants, as they add
nothing to the definitions themselves.
Signed-off-by: Lech Perczak <lech.perczak@camlingroup.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/2986a485-935d-4ab2-9a16-4a85288aa15a@camlingroup.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 246ac114f485 ("serial: sc16is7xx: enable THRI before filling TX FIFO")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit e3c04834ae1ab5e9cfbe8ac54ec734aa4774249d ]
When transmit flushing a qcom-geni UART during an ongoing TX DMA, the
UART gets stuck infinitely repeating corrupted TX DMA frames.
The DMA-mode uart_ops does not provide a flush_buffer callback, so an
in-flight transfer can complete after serial core has reset the transmit
kfifo, underflowing its length and resubmitting page-sized transfers
indefinitely. Add one that stops the transfer and clears tx_remaining
and tx_queued.
The stop path was also broken: it unmapped the buffer while the serial
engine could still read it, and never reset the TX DMA state machine.
Cancel the main sequencer command first, then reset the state machine
and wait for it before unmapping. Drop the early return so a pending
mapping is also cleaned up when the main command is inactive.
The bug can be triggered from userspace with a large write immediately
followed by TCOFLUSH. A following tcdrain will hang forever. The bug was
reproduced and this fix was validated on Arduino Uno Q (QRB2210)
using /dev/ttyHS1.
Assisted-by: Claude:claude-5-opus Codex:gpt-5
Signed-off-by: Jan Sebastian Götte <linux@jaseg.de>
Fixes: 2aaa43c70778 ("tty: serial: qcom-geni-serial: add support for serial engine DMA")
Cc: stable <stable@kernel.org>
Reviewed-by: Praveen Talari <praveen.talari@oss.qualcomm.com>
Link: https://patch.msgid.link/20260729174105.21838-2-git@jaseg.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Inlined `__qcom_geni_serial_cancel_tx_cmd()` as the existing open-coded cancel/abort block and dropped the `flush_buffer`→`flush_buffer_fifo` rename and `tx_queued` reset, which don't exist in this tree. ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 440915499231e9db1c361aa45bb702e8fd3b4a32 ]
dmaengine_terminate_all() does not wait for a running callback, so the TX
callback can still touch the TX buffer after it is freed. The RX poll
timer reads the RX buffers without the port lock.
Switch to dmaengine_terminate_sync() and delete the RX timer before
freeing the buffers.
Fixes: ead76f329f77 ("ARM: 6763/1: pl011: add optional RX DMA to PL011 v2")
Cc: stable <stable@kernel.org>
Assisted-by: Codex:gpt-5.6
Signed-off-by: Fan Wu <fanwu01@zju.edu.cn>
Link: https://patch.msgid.link/20260731085915.326775-4-fanwu01@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ changed upstream's `timer_delete_sync()` deletion to match this tree's `del_timer_sync()` spelling at the old call site ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit d2121faf133ac3bf9531b53a7e21273649a08517 ]
ntb_netdev_rx_handler() hands the received skb to the network stack
before allocating its replacement. If the allocation fails, nothing is
reposted. Every failure therefore takes one buffer out of the RX queue
while the interface remains up, and enough failures eventually stall
reception.
A retry path could refill the queue later, but ntb_netdev has none.
Allocate the replacement first instead. If that fails, drop the packet
and repost the same skb. This keeps the queue full and lets packet
delivery resume as soon as memory is available again.
Fixes: 548c237c0a99 ("net: Add support for NTB virtual ethernet device")
Cc: stable@vger.kernel.org
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://patch.msgid.link/20260806032537.3526498-1-den@valinux.co.jp
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
[ kept HEAD's `struct net_device *ndev = qp_data;` declaration instead of the per-queue context variables, adding only `new_skb` to the existing `skb` declaration ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 965a251f23ff69cfb4486974d4532e9bb551c7fc upstream.
Add an overflow check to ensure that data_offset + data_len + 8 does not
wrap, which would enable an OOB read of the USB data buffer.
Cc: Andrew Lunn <andrew+netdev@lunn.ch>
Cc: Shaoxu Liu <shaoxul@foxmail.com>
Signed-off-by: Griffin Kroah-Hartman <griffin@kroah.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/2026070900-denim-brook-52d4@gregkh
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 008cb88edb41f3c7c8e0ed763ff9f26719830984 upstream.
On 32-bit systems the config space is too large to ioremap in one go, so
pci_ecam_create() maps each bus segment separately and relies on the
->add_bus callback (pci_ecam_add_bus) to populate the per-bus mapping in
cfg->winp[]. pci_ecam_map_bus() then uses that mapping as the base for
every config access.
The generic ECAM ops (pci_generic_ecam_ops) already provide the ->add_bus
and ->remove_bus callbacks, but the CAM (legacy) ops in pci-host-generic.c
do not. As a result, on a 32-bit host using "pci-host-cam-generic" the
per-bus mapping is never set up and the first config read dereferences a
NULL base, crashing during bus enumeration:
Unable to handle kernel NULL pointer dereference at virtual address 00000800
Oops [#1]
CPU: 0 PID: 1 Comm: swapper Not tainted 6.9.7+ #43
Hardware name: Digilent Nexys-Video-A7 RV32 (DT)
epc : pci_generic_config_read+0x40/0xb0
ra : pci_generic_config_read+0x2c/0xb0
[<c038db9c>] pci_generic_config_read+0x40/0xb0
[<c038da04>] pci_bus_read_config_dword+0x50/0xb0
[<c0391e94>] pci_bus_generic_read_dev_vendor_id+0x3c/0x1ec
[<c039245c>] pci_scan_single_device+0xa4/0x11c
[<c0392570>] pci_scan_slot+0x9c/0x23c
[<c039388c>] pci_scan_child_bus_extend+0x58/0x2f4
[<c0393db0>] pci_scan_root_bus_bridge+0x64/0xe8
[<c0393e54>] pci_host_probe+0x20/0xc8
[<c03bc6f4>] pci_host_common_probe+0x144/0x1e4
Fix this by giving the CAM ops the same ->add_bus/->remove_bus callbacks.
Since pci_ecam_add_bus() and pci_ecam_remove_bus() are static to ecam.c,
move the CAM ops definition there as pci_generic_cam_ops (mirroring
pci_generic_ecam_ops) and export it for pci-host-generic.c to reference.
Fixes: 8fe55ef23387 ("PCI: Dynamically map ECAM regions")
Signed-off-by: Steffen Persvold <spersvold@gmail.com>
[mani: removed timestamp from log]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260709122446.3151899-1-spersvold@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 36a05d2820077bb3955acb8111e1041d39148037 ]
On the packet reception path, the ID of the MAC Port on which the packet
was received, is embedded in the RX DMA Descriptor's metadata. The ID is
extracted using the helper function cppi5_desc_get_tags_ids() which fills
in the 16-bit Source Tag into the 'port_id' variable. However, it is only
the lower 8-bits of the 16-bit Source Tag that represent the MAC Port ID,
while the upper 8-bits are Hardware-Reserved and carry an arbitrary value.
With the existing logic, sporadic kernel crash is observed due to the
subsequent driver code accessing out-of-bound memory because of an invalid
port_id.
Hence, fix the port_id extraction logic to use only the lower 8-bits of the
Source Tag as the MAC Port ID.
Fixes: 93a76530316a ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver")
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Chintan Vankar <c-vankar@ti.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260807111738.2055900-1-s-vadapalli@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit cef51860becd9700217c81732ca1eb1ea6ed6fe1 ]
macvlan devices inherit hard_header_len from lowerdev during macvlan_init(),
but leave needed_headroom and needed_tailroom set to 0.
When the underlying lowerdev requires extra headroom or tailroom for
headers/trailers (e.g. macsec, ipsec, wireguard, tunnels, or veth with rx
headroom), upper layers calculating packet headroom and tailroom fail to
reserve sufficient space.
This can result in reallocation overhead, skb headroom underflows, or KASAN
slab-use-after-free crashes when dev_hard_header() / macvlan_hard_header()
prepends header data or when lower devices append tailroom.
Fix this by:
1. Inheriting needed_headroom and needed_tailroom from lowerdev in macvlan_init().
2. Propagating needed_headroom and needed_tailroom updates to attached macvlans
in macvlan_device_event() when receiving NETDEV_FEAT_CHANGE events.
Fixes: b863ceb7ddce ("[NET]: Add macvlan driver")
Reported-by: Tangxin Xie <xietangxin@h-partners.com>
Closes: https://lore.kernel.org/netdev/CANn89i+1EW-sFNK8xoq98gMbPCeLS7e=+rs9gHfLg5Wj+4x0sw@mail.gmail.com/T/#m16adf0ff972cbfd8066c3a8e656e75eaeb12d021
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Hangbin Liu <liuhangbin@kylinos.cn>
Link: https://patch.msgid.link/20260806141938.287660-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e16e960d55a40d36bd7c2494cc005e757dc9a1ef ]
ipvlan devices inherit hard_header_len from phy_dev during ipvlan_init(),
but leave needed_headroom and needed_tailroom set to 0.
When the underlying phy_dev (or stacked lower device) requires extra headroom
or tailroom for headers/trailers (e.g. macsec, ipsec, wireguard, tunnels, or
veth with rx headroom), upper layers calculating packet headroom and tailroom
fail to reserve sufficient space.
This can result in reallocation overhead, skb headroom underflows, or KASAN
slab-use-after-free crashes when dev_hard_header() / ipvlan_hard_header()
prepends header data or when lower devices append tailroom.
Fix this by:
1. Inheriting needed_headroom and needed_tailroom from phy_dev in ipvlan_init().
2. Propagating needed_headroom and needed_tailroom updates to attached ipvlans
in ipvlan_device_event() when receiving NETDEV_FEAT_CHANGE events.
Fixes: 2ad7bf363841 ("ipvlan: Initial check-in of the IPVLAN driver.")
Reported-by: syzbot+1f9fd0f4b601cf88d6e6@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/6a720a21.40259c87.584f4.04bb.GAE@google.com/T/#u
Reported-by: Tangxin Xie <xietangxin@h-partners.com>
Closes: https://lore.kernel.org/netdev/CANn89i+1EW-sFNK8xoq98gMbPCeLS7e=+rs9gHfLg5Wj+4x0sw@mail.gmail.com/T/#mcc6307f115e500df23ea2980d5669fe95f20b6b4
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Hangbin Liu <liuhangbin@kylinos.cn>
Link: https://patch.msgid.link/20260806103857.115541-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d8726ef11512754a68c0ab53c57634a569b8feff ]
The commit referenced below restarts the CS if the validation is
still in progress. When debug_vm is enabled, all BOs from the CS
are invalidated so we will hit an infinite loop.
To avoid that, defer BO invalidation to amdgpu_cs_parser_fini.
Fixes: 59720bfd8c6d ("drm/amdgpu: restart the CS if some parts of the VM are still invalidated")
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 8c990ee9daa295462df24982ce6878db997a380a)
Cc: stable@vger.kernel.org
[ adjusted `adev->debug_vm` back to the global `amdgpu_vm_debug` param and restored the `adev` argument to `amdgpu_vm_bo_invalidate()` calls ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit bb493058c35c8676e48269ab6732688ea733d23c ]
amdgpu_dpm_get_pp_table() returns a pointer to a driver-owned power table
after dropping adev->pm.mutex. The sysfs path then copies from that pointer.
A concurrent pp_table write can replace and free the allocation during the
copy, causing a use-after-free.
Change the DPM interface to copy into caller-provided storage while the mutex
is held. Keep the size-only query for attribute discovery without exposing
the driver-owned pointer.
Fixes: 1684d3ba4885 ("drm/amd/amdgpu: change pptable output format from ASCII to binary")
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit f6eed7acfd30099ef7baeb6ba45bb59daad80631)
Cc: stable@vger.kernel.org
[ kept 6.18's existing `if (!pp_funcs->get_pp_table) return 0;` guard instead of upstream's SR-IOV/SCPM `-EOPNOTSUPP` guard and dropped the `default_attr_update()` hunk whose `pp_table` branch doesn't exist yet ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 048f4541b71fb19645fb79d6e62e6e4da23a4035 ]
amdgpu_dpm_get_gpu_metrics() returns a pointer to the shared metrics cache
after dropping adev->pm.mutex. The sysfs path then copies from that pointer.
Another reader can refresh the cache in place during the copy and return a
snapshot containing data from two generations.
Pass caller-provided storage through the DPM interface and copy the metrics
while the mutex is held. This keeps the cache pointer private and makes each
sysfs read observe one complete sample.
Fixes: 25c933b1c4fc ("drm/amd/powerplay: add new sysfs interface for retrieving gpu metrics(V2)")
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 862333bb48693ecafcae25af0c9d9ec31015ac77)
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit bef9004c5b91debfceaea2841855a4ebe81ff2b3 ]
Testing CANFD on RZ/G3E shows that many registers do not reset to their
initial values with the current flow of deasserting resets first and then
enabling clocks.
Based on the HW manual, clocks should be supplied first and the
resets deasserted afterward.
section 7.4.3 Procedure for Activating Modules: RZ/G2L
section 4.4.9.3 Procedure for Starting up Units: RZ/G3E
So, update the order of the initializing flow for resets and clocks
to match the hardware manual, resetting all CANFD registers to their
initial values. Also update rcar_canfd_global_deinit() to assert
resets before disabling clocks, so the teardown path mirrors the new
init ordering.
Fixes: 76e9353a80e9 ("can: rcar_canfd: Add support for RZ/G2L family")
Signed-off-by: Tu Nguyen <tu.nguyen.xg@renesas.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Tested-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Vincent Mailhol <mailhol@kernel.org>
Link: https://patch.msgid.link/20260625135216.130450-1-biju.das.jz@bp.renesas.com
Cc: stable@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 98f2e9e6d6f91a6abb43f166b244b428ba85fa2b ]
If a transaction times out, the START_BUSY signal can stay up, and
subsequent transactaction attempts will fail as the bus is still
considered busy.
I can easily trigger this by attempting to read from an address with no
device, e.g. when running i2cdetect. After the first read times out, all
subsequent read attempts return busy.
To get to a working state again, the controller needs to be reset to
clear the START_BUSY signal. So check for START_BUSY still asserted on a
timeout, and do reset in case it is,
This is also done by the original non-upstream iproc-smbus driver
implementation [1].
Works around situations like:
bcm-iproc-2c 1803b000.i2c: transaction timed out
bcm-iproc-2c 1803b000.i2c: bus is busy
bcm-iproc-2c 1803b000.i2c: bus is busy
bcm-iproc-2c 1803b000.i2c: bus is busy
bcm-iproc-2c 1803b000.i2c: bus is busy
bcm-iproc-2c 1803b000.i2c: bus is busy
...
where the bus never recovers after a timeout.
[1] https://github.com/opencomputeproject/onie/blob/master/patches/kernel/3.2.69/driver-iproc-smbus.patch
Fixes: e6e5dd3566e0 ("i2c: iproc: Add Broadcom iProc I2C Driver")
Signed-off-by: Jonas Gorski <jonas.gorski@bisdn.de>
Cc: <stable@vger.kernel.org> # v4.0+
Acked-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260717085507.34209-1-jonas.gorski@bisdn.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 796e2c260187e32530cf343546ba1cdf2e2f5491 ]
I2C and SMBus timeouts are not something the user needs to be informed
about on controller level. The client driver may know if that really is
a problem and give more detailed information to the user. The controller
should just pass this information upwards. Remove the printout.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Stable-dep-of: 98f2e9e6d6f9 ("i2c: iproc: reset bus after timeout if START_BUSY is stuck")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit b9553558b48db54ac9273e6b98d7263ef5c1a329 ]
In vxlan_xmit(), arp_reduce(), and vxlan_mdb_entry_skb_get(), pskb_may_pull() was
being called to verify the availability of network layer headers (ARP, IPv6/ND,
IP/IPv6 MDB keys).
However, during transmit skb->data points to the MAC header, so skb_network_offset(skb)
is ETH_HLEN (14 bytes). Using pskb_may_pull(skb, len) only checks len bytes from skb->data
rather than skb_network_offset(skb) + len, which can leave part of the network header
in non-linear frags.
Replace these remaining pskb_may_pull() calls with pskb_network_may_pull() to properly
account for the MAC header offset.
Fixes: e4f67addf158 ("add DOVE extensions for VXLAN")
Fixes: f564f45c4518 ("vxlan: add ipv6 proxy support")
Fixes: 0f83e69f44bf ("vxlan: Add MDB data path support")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: stable@vger.kernel.org
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260723144249.759100-6-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit be226352e8dc77d3313c096b2d8e7f69bf6980fc ]
VXLAN uses the TSTATS infrastructure (dev_sw_netstats_*()) for RX and
TX packet counters. It also uses the device core stats
(dev_core_stats_*()) for RX and TX drops.
Let's consolidate that using the DSTATS infrastructure, which can
handle both packet counters and packet drops. Statistics that don't
fit DSTATS are still updated atomically with DEV_STATS_INC().
While there, convert the "len" variable of vxlan_encap_bypass() to
unsigned int, to respect the types of skb->len and
dev_dstats_[rt]x_add().
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Link: https://patch.msgid.link/145558b184b3cda77911ca5682b6eb83c3ffed8e.1733313925.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: b9553558b48d ("vxlan: use pskb_network_may_pull() for transmit path header pulls")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 18eabadd73ae60023ab05e376246bd725fb0c113 ]
Currently vrf is the only module that uses NETDEV_PCPU_STAT_DSTATS.
In order to make this kind of statistics available to other modules,
we need to define the update functions in netdevice.h.
Therefore, let's define dev_dstats_*() functions for RX and TX packet
updates (packets, bytes and drops). Use these new functions in vrf.c
instead of vrf_rx_stats() and the other manual counter updates.
While there, update the type of the "len" variables to "unsigned int",
so that there're aligned with both skb->len and the new dstats update
functions.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Link: https://patch.msgid.link/d7a552ee382c79f4854e7fcc224cf176cd21150d.1733313925.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: b9553558b48d ("vxlan: use pskb_network_may_pull() for transmit path header pulls")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
