| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
[ Upstream commit c311f5e9248471a950f0a524c2fd736414d98900 ]
It can happen that when the cdev .release() is called, the driver
already called ida_destroy(). Move ida_free() to the _del() path.
We see with DEBUG_KOBJECT_RELEASE enabled and forcing an early PCI
unbind.
Fixes: 04922b7445a1 ("dmaengine: idxd: fix cdev setup and free device lifetime issues")
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Link: https://patch.msgid.link/20260121-idxd-fix-flr-on-kernel-queues-v3-v3-9-7ed70658a9d1@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1075ee66a8c19bfa375b19c236fd6a22a867f138 ]
ida_alloc() and ida_free() should be preferred to the deprecated
ida_simple_get() and ida_simple_remove().
This is less verbose.
Note that the upper limit of ida_simple_get() is exclusive, but the one of
ida_alloc_range() is inclusive. Sothis change allows one more device.
MINORMASK is ((1U << MINORBITS) - 1), so allowing MINORMASK as a maximum value
makes sense. It is also consistent with other "ida_.*MINORMASK" and
"ida_*MINOR()" usages.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Acked-by: Lijun Pan <lijun.pan@intel.com>
Link: https://lore.kernel.org/r/ac991f5f42112fa782a881d391d447529cbc4a23.1702967302.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Stable-dep-of: c311f5e92484 ("dmaengine: idxd: Fix freeing the allocated ida too late")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a17ce4bc6f4f9acf77ba416c36791a15602e53aa ]
A single AXIDMA controller can have one or two channels. When it has two
channels, the reset for both are tied together: resetting one channel
resets the other as well. This creates a problem where resetting one
channel will reset the registers for both channels, including clearing
interrupt enable bits for the other channel, which can then lead to
timeouts as the driver is waiting for an interrupt which never comes.
The driver currently has a probe-time work around for this: when a
channel is created, the driver also resets and enables the
interrupts. With two channels the reset for the second channel will
clear the interrupt enables for the first one. The work around in the
driver is just to manually enable the interrupts again in
xilinx_dma_alloc_chan_resources().
This workaround only addresses the probe-time issue. When channels are
reset at runtime (e.g., in xilinx_dma_terminate_all() or during error
recovery), there's no corresponding mechanism to restore the other
channel's interrupt enables. This leads to one channel having its
interrupts disabled while the driver expects them to work, causing
timeouts and DMA failures.
A proper fix is a complicated matter, as we should not reset the other
channel when it's operating normally. So, perhaps, there should be some
kind of synchronization for a common reset, which is not trivial to
implement. To add to the complexity, the driver also supports other DMA
types, like VDMA, CDMA and MCDMA, which don't have a shared reset.
However, when the two-channel AXIDMA is used in the (assumably) normal
use case, providing DMA for a single memory-to-memory device, the common
reset is a bit smaller issue: when something bad happens on one channel,
or when one channel is terminated, the assumption is that we also want
to terminate the other channel. And thus resetting both at the same time
is "ok".
With that line of thinking we can implement a bit better work around
than just the current probe time work around: let's enable the
AXIDMA interrupts at xilinx_dma_start_transfer() instead.
This ensures interrupts are enabled whenever a transfer starts,
regardless of any prior resets that may have cleared them.
This approach is also more logical: enable interrupts only when needed
for a transfer, rather than at resource allocation time, and, I think,
all the other DMA types should also use this model, but I'm reluctant to
do such changes as I cannot test them.
The reset function still enables interrupts even though it's not needed
for AXIDMA anymore, but it's common code for all DMA types (VDMA, CDMA,
MCDMA), so leave it unchanged to avoid affecting other variants.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Fixes: c0bba3a99f07 ("dmaengine: vdma: Add Support for Xilinx AXI Direct Memory Access Engine")
Link: https://patch.msgid.link/20260311-xilinx-dma-fix-v2-1-a725abb66e3c@ideasonboard.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c7d812e33f3e8ca0fa9eeabf71d1c7bc3acedc09 ]
The segment .control and .status fields both contain top bits which are
not part of the buffer size, the buffer size is located only in the bottom
max_buffer_len bits. To avoid interference from those top bits, mask out
the size using max_buffer_len first, and only then subtract the values.
Fixes: a575d0b4e663 ("dmaengine: xilinx_dma: Introduce xilinx_dma_get_residue")
Signed-off-by: Marek Vasut <marex@nabladev.com>
Link: https://patch.msgid.link/20260316222530.163815-1-marex@nabladev.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f61d145999d61948a23cd436ebbfa4c3b9ab8987 ]
The cyclic DMA calculation is currently entirely broken and reports
residue only for the first segment. The problem is twofold.
First, when the first descriptor finishes, it is moved from active_list
to done_list, but it is never returned back into the active_list. The
xilinx_dma_tx_status() expects the descriptor to be in the active_list
to report any meaningful residue information, which never happens after
the first descriptor finishes. Fix this up in xilinx_dma_start_transfer()
and if the descriptor is cyclic, lift it from done_list and place it back
into active_list list.
Second, the segment .status fields of the descriptor remain dirty. Once
the DMA did one pass on the descriptor, the .status fields are populated
with data by the DMA, but the .status fields are not cleared before reuse
during the next cyclic DMA round. The xilinx_dma_get_residue() recognizes
that as if the descriptor was complete and had 0 residue, which is bogus.
Reinitialize the status field before placing the descriptor back into the
active_list.
Fixes: c0bba3a99f07 ("dmaengine: vdma: Add Support for Xilinx AXI Direct Memory Access Engine")
Signed-off-by: Marek Vasut <marex@nabladev.com>
Link: https://patch.msgid.link/20260316221943.160375-1-marex@nabladev.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e9cc95397bb7da13fe8a5b53a2f23cfaf9018ade ]
Unlike chan->direction , struct dma_device .directions field is a
bitfield. Turn chan->direction into a bitfield to make it compatible
with struct dma_device .directions .
Fixes: 7e01511443c3 ("dmaengine: xilinx_dma: Set dma_device directions")
Signed-off-by: Marek Vasut <marex@nabladev.com>
Link: https://patch.msgid.link/20260316221728.160139-1-marex@nabladev.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e0adbf74e2a0455a6bc9628726ba87bcd0b42bf8 ]
devm_regmap_init_mmio returns an ERR_PTR() upon error, not NULL.
Fix the error check and also fix the error message. Use the error code
from ERR_PTR() instead of the wrong value in ret.
Fixes: 17ce252266c7 ("dmaengine: xilinx: xdma: Add xilinx xdma driver")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20251014061309.283468-1-alexander.stein@ew.tq-group.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
CYCLE_BIT bits for HDMA.
[ Upstream commit 3f63297ff61a994b99d710dcb6dbde41c4003233 ]
Others have submitted this issue (https://lore.kernel.org/dmaengine/
20240722030405.3385-1-zhengdongxiong@gxmicro.cn/),
but it has not been fixed yet. Therefore, more supplementary information
is provided here.
As mentioned in the "PCS-CCS-CB-TCB" Producer-Consumer Synchronization of
"DesignWare Cores PCI Express Controller Databook, version 6.00a":
1. The Consumer CYCLE_STATE (CCS) bit in the register only needs to be
initialized once; the value will update automatically to be
~CYCLE_BIT (CB) in the next chunk.
2. The Consumer CYCLE_BIT bit in the register is loaded from the LL
element and tested against CCS. When CB = CCS, the data transfer is
executed. Otherwise not.
The current logic sets customer (HDMA) CS and CB bits to 1 in each chunk
while setting the producer (software) CB of odd chunks to 0 and even
chunks to 1 in the linked list. This is leading to a mismatch between
the producer CB and consumer CS bits.
This issue can be reproduced by setting the transmission data size to
exceed one chunk. By the way, in the EDMA using the same "PCS-CCS-CB-TCB"
mechanism, the CS bit is only initialized once and this issue was not
found. Refer to
drivers/dma/dw-edma/dw-edma-v0-core.c:dw_edma_v0_core_start.
So fix this issue by initializing the CYCLE_STATE and CYCLE_BIT bits
only once.
Fixes: e74c39573d35 ("dmaengine: dw-edma: Add support for native HDMA")
Signed-off-by: LUO Haowen <luo-hw@foxmail.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/tencent_CB11AA9F3920C1911AF7477A9BD8EFE0AD05@qq.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 584b457f4166293bdfa50f930228e9fb91a38392 ]
The serdes device_node is obtained using of_get_child_by_name(),
which increments the reference count. However, it is never put,
leading to a reference leak.
Add the missing of_node_put() calls to ensure the reference count is
properly balanced.
Fixes: 7ae14cf581f2 ("phy: ti: j721e-wiz: Implement DisplayPort mode to the wiz driver")
Suggested-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/20260212-wiz-v2-1-6e8bd4cc7a4a@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d9cfb5193a047a92a4d3c0e91ea4cc87c8f7c478 ]
idxd_wq_disable_cleanup() which is called from the reset path for a
workqueue, sets the wq type to NONE, which for other parts of the
driver mean that the wq is empty (all its resources were released).
Only set the wq type to NONE after its resources are released.
Fixes: da32b28c95a7 ("dmaengine: idxd: cleanup workqueue config after disabling")
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Link: https://patch.msgid.link/20260121-idxd-fix-flr-on-kernel-queues-v3-v3-8-7ed70658a9d1@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3d33de353b1ff9023d5ec73b9becf80ea87af695 ]
The workqueue associated with an DSA/IAA device is not released when
the object is freed.
Fixes: 47c16ac27d4c ("dmaengine: idxd: fix idxd conf_dev 'struct device' lifetime")
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Link: https://patch.msgid.link/20260121-idxd-fix-flr-on-kernel-queues-v3-v3-7-7ed70658a9d1@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b84bb7bd913d8ca2f976ee6faf4a174f91c02b8d ]
When nvme_alloc_admin_tag_set() is called during a controller reset,
a previous admin queue may still exist. Release it properly before
allocating a new one to avoid orphaning the old queue.
This fixes a regression introduced by commit 03b3bcd319b3 ("nvme: fix
admin request_queue lifetime").
Cc: Keith Busch <kbusch@kernel.org>
Fixes: 03b3bcd319b3 ("nvme: fix admin request_queue lifetime").
Reported-and-tested-by: Yi Zhang <yi.zhang@redhat.com>
Closes: https://lore.kernel.org/linux-block/CAHj4cs9wv3SdPo+N01Fw2SHBYDs9tj2M_e1-GdQOkRy=DsBB1w@mail.gmail.com/
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Li hongliang <1468888505@139.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 17926cd770ec837ed27d9856cf07f2da8dda4131 ]
On Octal DTR capable flashes like Micron Xcella the writes cannot start
or end at an odd address in Octal DTR mode. Extra 0xff bytes need to be
appended or prepended to make sure the start address and end address are
even. 0xff is used because on NOR flashes a program operation can only
flip bits from 1 to 0, not the other way round. 0 to 1 flip needs to
happen via erases.
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Reviewed-by: Michael Walle <michael@walle.cc>
Signed-off-by: Luke Wang <ziniu.wang_1@nxp.com>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
Link: https://lore.kernel.org/r/20250708091646.292-2-ziniu.wang_1@nxp.com
Signed-off-by: Liyin Zhang <liyin.zhang.cn@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit f156b23df6a84efb2f6686156be94d4988568954 ]
On Octal DTR capable flashes like Micron Xcella reads cannot start or
end at an odd address in Octal DTR mode. Extra bytes need to be read at
the start or end to make sure both the start address and length remain
even.
To avoid allocating too much extra memory, thereby putting unnecessary
memory pressure on the system, the temporary buffer containing the extra
padding bytes is capped at PAGE_SIZE bytes. The rest of the 2-byte
aligned part should be read directly in the main buffer.
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Reviewed-by: Michael Walle <michael@walle.cc>
Signed-off-by: Luke Wang <ziniu.wang_1@nxp.com>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
Link: https://lore.kernel.org/r/20250708091646.292-1-ziniu.wang_1@nxp.com
[ Resolve conflict in drivers/mtd/spi-nor/core.c.
In spi_nor_read(), 6.6.y contains a spi_nor_convert_addr() call
before spi_nor_read_data(), introduced by 364995962803 ("mtd:
spi-nor: Add a ->convert_addr() method"), which does not exist in
mainline. This call is specific to Xilinx S3AN flashes, which use a
non-standard address format. In mainline, S3AN flash support was
removed entirely, and the corresponding spi_nor_convert_addr() call
was dropped by 9539d12d9f52 ("mtd: spi-nor: get rid of non-power-of-2
page size handling"). Keep the existing spi_nor_convert_addr() call
and insert the new spi_nor_octal_dtr_read() branch after it. ]
Signed-off-by: Liyin Zhang <liyin.zhang.cn@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 89a8567d84bde88cb7cdbbac2ab2299c4f991490 upstream.
Both rz_dmac_disable_hw() and rz_dmac_irq_handle_channel() update the
CHCTRL register. To avoid concurrency issues when configuring
functionalities exposed by this registers, take the virtual channel lock.
All other CHCTRL updates were already protected by the same lock.
Previously, rz_dmac_disable_hw() disabled and re-enabled local IRQs, before
accessing CHCTRL registers but this does not ensure race-free access.
Remove the local IRQ disable/enable code as well.
Fixes: 5000d37042a6 ("dmaengine: sh: Add DMAC driver for RZ/G2L SoC")
Cc: stable@vger.kernel.org
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://patch.msgid.link/20260316133252.240348-3-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit abb863e6213dc41a58ef8bb3289b7e77460dabf3 upstream.
The driver lists (ld_free, ld_queue) are used in
rz_dmac_free_chan_resources(), rz_dmac_terminate_all(),
rz_dmac_issue_pending(), and rz_dmac_irq_handler_thread(), all under
the virtual channel lock. Take the same lock in rz_dmac_prep_slave_sg()
and rz_dmac_prep_dma_memcpy() as well to avoid concurrency issues, since
these functions also check whether the lists are empty and update or
remove list entries.
Fixes: 5000d37042a6 ("dmaengine: sh: Add DMAC driver for RZ/G2L SoC")
Cc: stable@vger.kernel.org
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://patch.msgid.link/20260316133252.240348-2-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit cfe02147e86307a17057ee4e3604f5f5919571d2 upstream.
The mbox_client for qcom-mpm sends NULL doorbell messages via
mbox_send_message() but never signals TX completion.
Set knows_txdone=true and call mbox_client_txdone() after a successful
send, matching the pattern used by other Qualcomm mailbox clients (smp2p,
smsm, qcom_aoss etc).
Fixes: a6199bb514d8a6 "irqchip: Add Qualcomm MPM controller driver"
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260322171533.608436-1-jassisinghbrar@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 647b8a2fe474474704110db6bd07f7a139e621eb upstream.
The napi_consume_skb() function is not intended to be called in an IRQ
disabled context. However, after commit 6bc8a5098bf4 ("net: macb: Fix
tx_ptr_lock locking"), the freeing of TX SKBs is performed with IRQs
disabled. To resolve the following call trace, use dev_consume_skb_any()
for freeing TX SKBs:
WARNING: kernel/softirq.c:430 at __local_bh_enable_ip+0x174/0x188, CPU#0: ksoftirqd/0/15
Modules linked in:
CPU: 0 UID: 0 PID: 15 Comm: ksoftirqd/0 Not tainted 7.0.0-rc4-next-20260319-yocto-standard-dirty #37 PREEMPT
Hardware name: ZynqMP ZCU102 Rev1.1 (DT)
pstate: 200000c5 (nzCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : __local_bh_enable_ip+0x174/0x188
lr : local_bh_enable+0x24/0x38
sp : ffff800082b3bb10
x29: ffff800082b3bb10 x28: ffff0008031f3c00 x27: 000000000011ede0
x26: ffff000800a7ff00 x25: ffff800083937ce8 x24: 0000000000017a80
x23: ffff000803243a78 x22: 0000000000000040 x21: 0000000000000000
x20: ffff000800394c80 x19: 0000000000000200 x18: 0000000000000001
x17: 0000000000000001 x16: ffff000803240000 x15: 0000000000000000
x14: ffffffffffffffff x13: 0000000000000028 x12: ffff000800395650
x11: ffff8000821d1528 x10: ffff800081c2bc08 x9 : ffff800081c1e258
x8 : 0000000100000301 x7 : ffff8000810426ec x6 : 0000000000000000
x5 : 0000000000000001 x4 : 0000000000000001 x3 : 0000000000000000
x2 : 0000000000000008 x1 : 0000000000000200 x0 : ffff8000810428dc
Call trace:
__local_bh_enable_ip+0x174/0x188 (P)
local_bh_enable+0x24/0x38
skb_attempt_defer_free+0x190/0x1d8
napi_consume_skb+0x58/0x108
macb_tx_poll+0x1a4/0x558
__napi_poll+0x50/0x198
net_rx_action+0x1f4/0x3d8
handle_softirqs+0x16c/0x560
run_ksoftirqd+0x44/0x80
smpboot_thread_fn+0x1d8/0x338
kthread+0x120/0x150
ret_from_fork+0x10/0x20
irq event stamp: 29751
hardirqs last enabled at (29750): [<ffff8000813be184>] _raw_spin_unlock_irqrestore+0x44/0x88
hardirqs last disabled at (29751): [<ffff8000813bdf60>] _raw_spin_lock_irqsave+0x38/0x98
softirqs last enabled at (29150): [<ffff8000800f1aec>] handle_softirqs+0x504/0x560
softirqs last disabled at (29153): [<ffff8000800f2fec>] run_ksoftirqd+0x44/0x80
Fixes: 6bc8a5098bf4 ("net: macb: Fix tx_ptr_lock locking")
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Cc: stable@vger.kernel.org
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260321-macb-tx-v1-1-b383a58dd4e6@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7a9f448d44127217fabc4065c5ba070d4e0b5d37 upstream.
ses_recv_diag() can return a positive value, which also means that an
error happened, so do not only test for negative values.
Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: stable <stable@kernel.org>
Assisted-by: gkh_clanker_2000
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://patch.msgid.link/2026022301-bony-overstock-a07f@gregkh
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 61d099ac4a7a8fb11ebdb6e2ec8d77f38e77362f upstream.
A malicious or compromised VIO server can return a num_written value in the
discover targets MAD response that exceeds max_targets. This value is
stored directly in vhost->num_targets without validation, and is then used
as the loop bound in ibmvfc_alloc_targets() to index into disc_buf[], which
is only allocated for max_targets entries. Indices at or beyond max_targets
access kernel memory outside the DMA-coherent allocation. The
out-of-bounds data is subsequently embedded in Implicit Logout and PLOGI
MADs that are sent back to the VIO server, leaking kernel memory.
Fix by clamping num_written to max_targets before storing it.
Fixes: 072b91f9c651 ("[SCSI] ibmvfc: IBM Power Virtual Fibre Channel Adapter Client Driver")
Reported-by: Yuhao Jiang <danisjiang@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Tyllis Xu <LivelyCarpet87@gmail.com>
Reviewed-by: Dave Marquardt <davemarq@linux.ibm.com>
Acked-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Link: https://patch.msgid.link/20260314170151.548614-1-LivelyCarpet87@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
napi_tx is false
commit ba8bda9a0896746053aa97ac6c3e08168729172c upstream.
A UAF issue occurs when the virtio_net driver is configured with napi_tx=N
and the device's IFF_XMIT_DST_RELEASE flag is cleared
(e.g., during the configuration of tc route filter rules).
When IFF_XMIT_DST_RELEASE is removed from the net_device, the network stack
expects the driver to hold the reference to skb->dst until the packet
is fully transmitted and freed. In virtio_net with napi_tx=N,
skbs may remain in the virtio transmit ring for an extended period.
If the network namespace is destroyed while these skbs are still pending,
the corresponding dst_ops structure has freed. When a subsequent packet
is transmitted, free_old_xmit() is triggered to clean up old skbs.
It then calls dst_release() on the skb associated with the stale dst_entry.
Since the dst_ops (referenced by the dst_entry) has already been freed,
a UAF kernel paging request occurs.
fix it by adds skb_dst_drop(skb) in start_xmit to explicitly release
the dst reference before the skb is queued in virtio_net.
Call Trace:
Unable to handle kernel paging request at virtual address ffff80007e150000
CPU: 2 UID: 0 PID: 6236 Comm: ping Kdump: loaded Not tainted 7.0.0-rc1+ #6 PREEMPT
...
percpu_counter_add_batch+0x3c/0x158 lib/percpu_counter.c:98 (P)
dst_release+0xe0/0x110 net/core/dst.c:177
skb_release_head_state+0xe8/0x108 net/core/skbuff.c:1177
sk_skb_reason_drop+0x54/0x2d8 net/core/skbuff.c:1255
dev_kfree_skb_any_reason+0x64/0x78 net/core/dev.c:3469
napi_consume_skb+0x1c4/0x3a0 net/core/skbuff.c:1527
__free_old_xmit+0x164/0x230 drivers/net/virtio_net.c:611 [virtio_net]
free_old_xmit drivers/net/virtio_net.c:1081 [virtio_net]
start_xmit+0x7c/0x530 drivers/net/virtio_net.c:3329 [virtio_net]
...
Reproduction Steps:
NETDEV="enp3s0"
config_qdisc_route_filter() {
tc qdisc del dev $NETDEV root
tc qdisc add dev $NETDEV root handle 1: prio
tc filter add dev $NETDEV parent 1:0 \
protocol ip prio 100 route to 100 flowid 1:1
ip route add 192.168.1.100/32 dev $NETDEV realm 100
}
test_ns() {
ip netns add testns
ip link set $NETDEV netns testns
ip netns exec testns ifconfig $NETDEV 10.0.32.46/24
ip netns exec testns ping -c 1 10.0.32.1
ip netns del testns
}
config_qdisc_route_filter
test_ns
sleep 2
test_ns
Fixes: f2fc6a54585a ("[NETNS][IPV6] route6 - move ip6_dst_ops inside the network namespace")
Cc: stable@vger.kernel.org
Signed-off-by: xietangxin <xietangxin@yeah.net>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Fixes: 0287587884b1 ("net: better IFF_XMIT_DST_RELEASE support")
Link: https://patch.msgid.link/20260312025406.15641-1-xietangxin@yeah.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit bef4f4a88b73e4cc550d25f665b8a9952af22773 upstream.
MEDIA_REQUEST_IOC_REINIT can run concurrently with VIDIOC_REQBUFS(0)
queue teardown paths. This can race request object cleanup against vb2
queue cancellation and lead to use-after-free reports.
We already serialize request queueing against STREAMON/OFF with
req_queue_mutex. Extend that serialization to REQBUFS, and also take
the same mutex in media_request_ioctl_reinit() so REINIT is in the
same exclusion domain.
This keeps request cleanup and queue cancellation from running in
parallel for request-capable devices.
Fixes: 6093d3002eab ("media: vb2: keep a reference to the request until dqbuf")
Cc: stable@vger.kernel.org
Signed-off-by: Yuchan Nam <entropy1110@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b0c9d8ae71509f25690d57f2efddebf7f4b12194 upstream.
cputemp_is_visible() validates the channel index against
CPUTEMP_CHANNEL_NUMS, but currently uses '>' instead of '>='.
As a result, channel == CPUTEMP_CHANNEL_NUMS is not rejected even though
valid indices are 0 .. CPUTEMP_CHANNEL_NUMS - 1.
Fix the bounds check by using '>=' so invalid channel indices are
rejected before indexing the core bitmap.
Fixes: bf3608f338e9 ("hwmon: peci: Add cputemp driver")
Cc: stable@vger.kernel.org
Signed-off-by: Sanman Pradhan <psanman@juniper.net>
Link: https://lore.kernel.org/r/20260323002352.93417-3-sanman.pradhan@hpe.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
temperature
commit 0adc752b4f7d82af7bd14f7cad3091b3b5d702ba upstream.
The hwmon sysfs ABI expects tempN_crit_hyst to report the temperature at
which the critical condition clears, not the hysteresis delta from the
critical limit.
The peci cputemp driver currently returns tjmax - tcontrol for
crit_hyst_type, which is the hysteresis margin rather than the
corresponding absolute temperature.
Return tcontrol directly, and update the documentation accordingly.
Fixes: bf3608f338e9 ("hwmon: peci: Add cputemp driver")
Cc: stable@vger.kernel.org
Signed-off-by: Sanman Pradhan <psanman@juniper.net>
Link: https://lore.kernel.org/r/20260323002352.93417-2-sanman.pradhan@hpe.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3075a3951f7708da5a8ab47b0b7d068a32f69e58 upstream.
The custom avs0_enable and avs1_enable sysfs attributes access PMBus
registers through the exported API helpers (pmbus_read_byte_data,
pmbus_read_word_data, pmbus_write_word_data, pmbus_update_byte_data)
without holding the PMBus update_lock mutex. These exported helpers do
not acquire the mutex internally, unlike the core's internal callers
which hold the lock before invoking them.
The store callback is especially vulnerable: it performs a multi-step
read-modify-write sequence (read VOUT_COMMAND, write VOUT_COMMAND, then
update OPERATION) where concurrent access from another thread could
interleave and corrupt the register state.
Add pmbus_lock_interruptible()/pmbus_unlock() around both the show and
store callbacks to serialize PMBus register access with the rest of the
driver.
Fixes: 038a9c3d1e424 ("hwmon: (pmbus/isl68137) Add driver for Intersil ISL68137 PWM Controller")
Cc: stable@vger.kernel.org
Signed-off-by: Sanman Pradhan <psanman@juniper.net>
Link: https://lore.kernel.org/r/20260319173055.125271-3-sanman.pradhan@hpe.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit fbddf68d7b4e1e6da7a78dd7fbd8ec376536584a upstream.
SST-PP locked bit width is set to three bits. It should be only one bit.
Use SST_PP_LOCK_WIDTH define instead of SST_PP_LEVEL_WIDTH.
Fixes: ea009e4769fa ("platform/x86: ISST: Add SST-PP support via TPMI")
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260323153635.3263828-1-srinivas.pandruvada@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6a28fb8cb28b9eb39a392e531d938a889eacafc5 upstream.
A recently reported issue highlighted that the cached requested_freq
is not guaranteed to stay in sync with policy->cur. If the platform
changes the actual CPU frequency after the governor sets one (e.g.
due to platform-specific frequency scaling) and a re-sync occurs
later, policy->cur may diverge from requested_freq.
This can lead to incorrect behavior in the conservative governor.
For example, the governor may assume the CPU is already running at
the maximum frequency and skip further increases even though there
is still headroom.
Avoid this by resetting the cached requested_freq to policy->cur on
detecting a change in policy limits.
Reported-by: Lifeng Zheng <zhenglifeng1@huawei.com>
Tested-by: Lifeng Zheng <zhenglifeng1@huawei.com>
Link: https://lore.kernel.org/all/20260210115458.3493646-1-zhenglifeng1@huawei.com/
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Zhongqiu Han <zhongqiu.han@oss.qualcomm.com>
Cc: All applicable <stable@vger.kernel.org>
Link: https://patch.msgid.link/d846a141a98ac0482f20560fcd7525c0f0ec2f30.1773999467.git.viresh.kumar@linaro.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit b341c1176f2e001b3adf0b47154fc31589f7410e ]
There is a teardown order issue in the driver. The SPI controller is
registered using devm_spi_register_controller(), which delays
unregistration of the SPI controller until after the fsl_lpspi_remove()
function returns.
As the fsl_lpspi_remove() function synchronously tears down the DMA
channels, a running SPI transfer triggers the following NULL pointer
dereference due to use after free:
| fsl_lpspi 42550000.spi: I/O Error in DMA RX
| Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
[...]
| Call trace:
| fsl_lpspi_dma_transfer+0x260/0x340 [spi_fsl_lpspi]
| fsl_lpspi_transfer_one+0x198/0x448 [spi_fsl_lpspi]
| spi_transfer_one_message+0x49c/0x7c8
| __spi_pump_transfer_message+0x120/0x420
| __spi_sync+0x2c4/0x520
| spi_sync+0x34/0x60
| spidev_message+0x20c/0x378 [spidev]
| spidev_ioctl+0x398/0x750 [spidev]
[...]
Switch from devm_spi_register_controller() to spi_register_controller() in
fsl_lpspi_probe() and add the corresponding spi_unregister_controller() in
fsl_lpspi_remove().
Fixes: 5314987de5e5 ("spi: imx: add lpspi bus driver")
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://patch.msgid.link/20260319-spi-fsl-lpspi-fixes-v1-1-b433e435b2d8@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit bf08749a6abb6d1959bfdc0edc32c640df407558 ]
The adm1177 driver exposes the current alert threshold through
hwmon_curr_max_alarm. This violates the hwmon sysfs ABI, where
*_alarm attributes are read-only status flags and writable thresholds
must use currN_max.
The driver also stores the threshold internally in microamps, while
currN_max is defined in milliamps. Convert the threshold accordingly
on both the read and write paths.
Widen the cached threshold and related calculations to 64 bits so
that small shunt resistor values do not cause truncation or overflow.
Also use 64-bit arithmetic for the mA/uA conversions, clamp writes
to the range the hardware can represent, and propagate failures from
adm1177_write_alert_thr() instead of silently ignoring them.
Update the hwmon documentation to reflect the attribute rename and
the correct units returned by the driver.
Fixes: 09b08ac9e8d5 ("hwmon: (adm1177) Add ADM1177 Hot Swap Controller and Digital Power Monitor driver")
Signed-off-by: Sanman Pradhan <psanman@juniper.net>
Acked-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20260325051246.28262-1-sanman.pradhan@hpe.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7150850146ebfa4ca998f653f264b8df6f7f85be ]
amdgpu_amdkfd_submit_ib() submits a GPU job and gets a fence
from amdgpu_ib_schedule(). This fence is used to wait for job
completion.
Currently, the code drops the fence reference using dma_fence_put()
before calling dma_fence_wait().
If dma_fence_put() releases the last reference, the fence may be
freed before dma_fence_wait() is called. This can lead to a
use-after-free.
Fix this by waiting on the fence first and releasing the reference
only after dma_fence_wait() completes.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.c:697 amdgpu_amdkfd_submit_ib() warn: passing freed memory 'f' (line 696)
Fixes: 9ae55f030dc5 ("drm/amdgpu: Follow up change to previous drm scheduler change.")
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 8b9e5259adc385b61a6590a13b82ae0ac2bd3482)
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f6484cadbcaf26b5844b51bd7307a663dda48ef6 ]
When ec_install_handlers() returns -EPROBE_DEFER on reduced-hardware
platforms, it has already started the EC and installed the address
space handler with the struct acpi_ec pointer as handler context.
However, acpi_ec_setup() propagates the error without any cleanup.
The caller acpi_ec_add() then frees the struct acpi_ec for non-boot
instances, leaving a dangling handler context in ACPICA.
Any subsequent AML evaluation that accesses an EC OpRegion field
dispatches into acpi_ec_space_handler() with the freed pointer,
causing a use-after-free:
BUG: KASAN: slab-use-after-free in mutex_lock (kernel/locking/mutex.c:289)
Write of size 8 at addr ffff88800721de38 by task init/1
Call Trace:
<TASK>
mutex_lock (kernel/locking/mutex.c:289)
acpi_ec_space_handler (drivers/acpi/ec.c:1362)
acpi_ev_address_space_dispatch (drivers/acpi/acpica/evregion.c:293)
acpi_ex_access_region (drivers/acpi/acpica/exfldio.c:246)
acpi_ex_field_datum_io (drivers/acpi/acpica/exfldio.c:509)
acpi_ex_extract_from_field (drivers/acpi/acpica/exfldio.c:700)
acpi_ex_read_data_from_field (drivers/acpi/acpica/exfield.c:327)
acpi_ex_resolve_node_to_value (drivers/acpi/acpica/exresolv.c:392)
</TASK>
Allocated by task 1:
acpi_ec_alloc (drivers/acpi/ec.c:1424)
acpi_ec_add (drivers/acpi/ec.c:1692)
Freed by task 1:
kfree (mm/slub.c:6876)
acpi_ec_add (drivers/acpi/ec.c:1751)
The bug triggers on reduced-hardware EC platforms (ec->gpe < 0)
when the GPIO IRQ provider defers probing. Once the stale handler
exists, any unprivileged sysfs read that causes AML to touch an
EC OpRegion (battery, thermal, backlight) exercises the dangling
pointer.
Fix this by calling ec_remove_handlers() in the error path of
acpi_ec_setup() before clearing first_ec. ec_remove_handlers()
checks each EC_FLAGS_* bit before acting, so it is safe to call
regardless of how far ec_install_handlers() progressed:
-ENODEV (handler not installed): only calls acpi_ec_stop()
-EPROBE_DEFER (handler installed): removes handler, stops EC
Fixes: 03e9a0e05739 ("ACPI: EC: Consolidate event handler installation code")
Reported-by: Xiang Mei <xmei5@asu.edu>
Signed-off-by: Weiming Shi <bestswngs@gmail.com>
Link: https://patch.msgid.link/20260324165458.1337233-2-bestswngs@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ef3d549e1deb3466c61f3b01d22fc3fe3e5efb08 ]
In f_ospi_probe(), when num_cs validation fails, it returns without
calling spi_controller_put() on the SPI controller, which causes a
resource leak.
Use devm_spi_alloc_host() instead of spi_alloc_host() to ensure the
SPI controller is properly freed when probe fails.
Fixes: 1b74dd64c861 ("spi: Add Socionext F_OSPI SPI flash controller driver")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Link: https://patch.msgid.link/20260319-sn-f-v1-1-33a6738d2da8@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 08441f10f4dc09fdeb64529953ac308abc79dd38 ]
When reading exactly 512 bytes with burst read enabled, the
extra_byte_added path breaks out of the inner do-while without
decrementing len. The outer while(len) then re-enters and gmbus_wait()
times out since all data has been delivered. Decrement len before the
break so the outer loop terminates correctly.
Fixes: d5dc0f43f268 ("drm/i915/gmbus: Enable burst read")
Signed-off-by: Samasth Norway Ananda <samasth.norway.ananda@oracle.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patch.msgid.link/20260316231920.135438-2-samasth.norway.ananda@oracle.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 4ab0f09ee73fc853d00466682635f67c531f909c)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d71afa9deb4d413232ba16d693f7d43b321931b4 ]
After commit 37c4e72b0651 ("scsi: Fix sas_user_scan() to handle wildcard
and multi-channel scans"), if the device supports multiple channels (0 to
shost->max_channel), user_scan() invokes updated sas_user_scan() to perform
the scan behavior for a specific transfer. However, when the user
specifies shost->max_channel, it will return -EINVAL, which is not
expected.
Fix and support specifying the scan shost->max_channel for scanning.
Fixes: 37c4e72b0651 ("scsi: Fix sas_user_scan() to handle wildcard and multi-channel scans")
Signed-off-by: Yihang Li <liyihang9@huawei.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Link: https://patch.msgid.link/20260317063147.2182562-1-liyihang9@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7221f581eefa79ead06e171044f393fb7ee22f87 ]
When rdma_connect() fails due to an invalid arp index, user space rdma core
reports ENOMEM which is confusing. Modify irdma_make_cm_node() to return the
correct error code.
Fixes: 146b9756f14c ("RDMA/irdma: Add connection manager")
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6f52370970ac07d352a7af4089e55e0e6425f827 ]
Resolve deadlock that occurs when user executes netdev reset while RDMA
applications (e.g., rping) are active. The netdev reset causes ice
driver to remove irdma auxiliary driver, triggering device_delete and
subsequent client removal. During client removal, uverbs_client waits
for QP reference count to reach zero while cma_client holds the final
reference, creating circular dependency and indefinite wait in iWARP
mode. Skip QP reference count wait during device reset to prevent
deadlock.
Fixes: c8f304d75f6c ("RDMA/irdma: Prevent QP use after free")
Signed-off-by: Anil Samal <anil.samal@intel.com>
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c45c6ebd693b944f1ffe429fdfb6cc1674c237be ]
During reset, irdma_modify_qp() to error should be called to disconnect
the QP. Without this fix, if not preceded by irdma_modify_qp() to error, the
API call irdma_destroy_qp() gets stuck waiting for the QP refcount to go
to zero, because the cm_node associated with this QP isn't disconnected.
Fixes: 915cc7ac0f8e ("RDMA/irdma: Add miscellaneous utility definitions")
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b415399c9a024d574b65479636f0d4eb625b9abd ]
The cm_node is available and the usage of cm_node and event->cm_node
seems arbitrary. Clean up unnecessary dereference of event->cm_node.
Fixes: 146b9756f14c ("RDMA/irdma: Add connection manager")
Signed-off-by: Ivan Barrera <ivan.d.barrera@intel.com>
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5e8f0239731a83753473b7aa91bda67bbdff5053 ]
Remove a NOP wait_event() in irdma_modify_qp_roce() which is relevant
for iWARP and likely a copy and paste artifact for RoCEv2. The wait event
is for sending a reset on a TCP connection, after the reset has been
requested in irdma_modify_qp(), which occurs only in iWarp mode.
Fixes: b48c24c2d710 ("RDMA/irdma: Implement device supported verb APIs")
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8c1f19a2225cf37b3f8ab0b5a8a5322291cda620 ]
In irdma_modify_qp() update ibqp state to error if the irdma QP is already
in error state, otherwise the ibqp state which is visible to the consumer
app remains stale.
Fixes: b48c24c2d710 ("RDMA/irdma: Implement device supported verb APIs")
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 11a95521fb93c91e2d4ef9d53dc80ef0a755549b ]
In irdma_create_qp, if ib_copy_to_udata fails, it will call
irdma_destroy_qp to clean up which will attempt to wait on
the free_qp completion, which is not initialized yet. Fix this
by initializing the completion before the ib_copy_to_udata call.
Fixes: b48c24c2d710 ("RDMA/irdma: Implement device supported verb APIs")
Signed-off-by: Jacob Moroni <jmoroni@google.com>
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 00da250c21b074ea9494c375d0117b69e5b1d0a4 ]
When IOMMU passthrough mode is active, ib_dma_map_sgtable_attrs()
produces no coalescing: each scatterlist page maps 1:1 to a DMA
entry, so sgt.nents equals the raw page count. A 1 MB transfer
yields 256 DMA entries. If that count exceeds the device's
max_sgl_rd threshold (an optimization hint from mlx5 firmware),
rdma_rw_io_needs_mr() steers the operation into the MR
registration path. Each such operation consumes one or more MRs
from a pool sized at max_rdma_ctxs -- roughly one MR per
concurrent context. Under write-intensive workloads that issue
many concurrent RDMA READs, the pool is rapidly exhausted,
ib_mr_pool_get() returns NULL, and rdma_rw_init_one_mr() returns
-EAGAIN. Upper layer protocols treat this as a fatal DMA mapping
failure and tear down the connection.
The max_sgl_rd check is a performance optimization, not a
correctness requirement: the device can handle large SGE counts
via direct posting, just less efficiently than with MR
registration. When the MR pool cannot satisfy a request, falling
back to the direct SGE (map_wrs) path avoids the connection
reset while preserving the MR optimization for the common case
where pool resources are available.
Add a fallback in rdma_rw_ctx_init() so that -EAGAIN from
rdma_rw_init_mr_wrs() triggers direct SGE posting instead of
propagating the error. iWARP devices, which mandate MR
registration for RDMA READs, and force_mr debug mode continue
to treat -EAGAIN as terminal.
Fixes: 00bd1439f464 ("RDMA/rw: Support threshold for registration vs scattering to local pages")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20260313194201.5818-2-cel@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 09e70e4f119ff650d24c96161fd2f62ac7e424b0 ]
If the selector register is represented in each page, its value
according to the debugfs is stale because it gets synchronized
only after the real page switch happens. Hence the regmap cache
initialisation from the HW inherits outdated data in the selector
register.
Synchronize cache for the page selector just in time.
Before (offset followed by hexdump, the first byte is selector):
// Real registers
18: 05 ff 00 00 ff 0f 00 00 f0 00 00 00
...
// Virtual (per port)
40: 05 ff 00 00 e0 e0 00 00 00 00 00 1f
50: 00 ff 00 00 e0 e0 00 00 00 00 00 1f
60: 01 ff 00 00 ff ff 00 00 00 00 00 00
70: 02 ff 00 00 cf f3 00 00 00 00 00 0c
80: 03 ff 00 00 00 00 00 00 00 00 00 ff
90: 04 ff 00 00 ff 0f 00 00 f0 00 00 00
After:
// Real registers
18: 05 ff 00 00 ff 0f 00 00 f0 00 00 00
...
// Virtual (per port)
40: 00 ff 00 00 e0 e0 00 00 00 00 00 1f
50: 01 ff 00 00 e0 e0 00 00 00 00 00 1f
60: 02 ff 00 00 ff ff 00 00 00 00 00 00
70: 03 ff 00 00 cf f3 00 00 00 00 00 0c
80: 04 ff 00 00 00 00 00 00 00 00 00 ff
90: 05 ff 00 00 ff 0f 00 00 f0 00 00 00
Fixes: 6863ca622759 ("regmap: Add support for register indirect addressing.")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260302184753.2693803-1-andriy.shevchenko@linux.intel.com
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 72d96e4e24bbefdcfbc68bdb9341a05d8f5cb6e5 ]
There's a potential mismatch between the memory reserved for statistics
and the amount of memory written.
gem_get_sset_count() correctly computes the number of stats based on the
active queues, whereas gem_get_ethtool_stats() indiscriminately copies
data using the maximum number of queues, and in the case the number of
active queues is less than MACB_MAX_QUEUES, this results in a OOB write
as observed in the KASAN splat.
==================================================================
BUG: KASAN: vmalloc-out-of-bounds in gem_get_ethtool_stats+0x54/0x78
[macb]
Write of size 760 at addr ffff80008080b000 by task ethtool/1027
CPU: [...]
Tainted: [E]=UNSIGNED_MODULE
Hardware name: raspberrypi rpi/rpi, BIOS 2025.10 10/01/2025
Call trace:
show_stack+0x20/0x38 (C)
dump_stack_lvl+0x80/0xf8
print_report+0x384/0x5e0
kasan_report+0xa0/0xf0
kasan_check_range+0xe8/0x190
__asan_memcpy+0x54/0x98
gem_get_ethtool_stats+0x54/0x78 [macb
926c13f3af83b0c6fe64badb21ec87d5e93fcf65]
dev_ethtool+0x1220/0x38c0
dev_ioctl+0x4ac/0xca8
sock_do_ioctl+0x170/0x1d8
sock_ioctl+0x484/0x5d8
__arm64_sys_ioctl+0x12c/0x1b8
invoke_syscall+0xd4/0x258
el0_svc_common.constprop.0+0xb4/0x240
do_el0_svc+0x48/0x68
el0_svc+0x40/0xf8
el0t_64_sync_handler+0xa0/0xe8
el0t_64_sync+0x1b0/0x1b8
The buggy address belongs to a 1-page vmalloc region starting at
0xffff80008080b000 allocated at dev_ethtool+0x11f0/0x38c0
The buggy address belongs to the physical page:
page: refcount:1 mapcount:0 mapping:0000000000000000
index:0xffff00000a333000 pfn:0xa333
flags: 0x7fffc000000000(node=0|zone=0|lastcpupid=0x1ffff)
raw: 007fffc000000000 0000000000000000 dead000000000122 0000000000000000
raw: ffff00000a333000 0000000000000000 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff80008080b080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff80008080b100: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffff80008080b180: 00 00 00 00 00 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
^
ffff80008080b200: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
ffff80008080b280: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
==================================================================
Fix it by making sure the copied size only considers the active number of
queues.
Fixes: 512286bbd4b7 ("net: macb: Added some queue statistics")
Signed-off-by: Paolo Valerio <pvalerio@redhat.com>
Reviewed-by: Nicolai Buchwitz <nb@tipi-net.de>
Link: https://patch.msgid.link/20260323191634.2185840-1-pvalerio@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 129fa608b6ad08b8ab7178eeb2ec272c993aaccc ]
btusb_work() maps the number of active SCO links to USB alternate
settings through a three-entry lookup table when CVSD traffic uses
transparent voice settings. The lookup currently indexes alts[] with
data->sco_num - 1 without first constraining sco_num to the number of
available table entries.
While the table only defines alternate settings for up to three SCO
links, data->sco_num comes from hci_conn_num() and is used directly.
Cap the lookup to the last table entry before indexing it so the
driver keeps selecting the highest supported alternate setting without
reading past alts[].
Fixes: baac6276c0a9 ("Bluetooth: btusb: handle mSBC audio over USB Endpoints")
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 94d8e6fe5d0818e9300e514e095a200bd5ff93ae ]
btintel_hw_error() issues two __hci_cmd_sync() calls (HCI_OP_RESET
and Intel exception-info retrieval) without holding
hci_req_sync_lock(). This lets it race against
hci_dev_do_close() -> btintel_shutdown_combined(), which also runs
__hci_cmd_sync() under the same lock. When both paths manipulate
hdev->req_status/req_rsp concurrently, the close path may free the
response skb first, and the still-running hw_error path hits a
slab-use-after-free in kfree_skb().
Wrap the whole recovery sequence in hci_req_sync_lock/unlock so it
is serialized with every other synchronous HCI command issuer.
Below is the data race report and the kasan report:
BUG: data-race in __hci_cmd_sync_sk / btintel_shutdown_combined
read of hdev->req_rsp at net/bluetooth/hci_sync.c:199
by task kworker/u17:1/83:
__hci_cmd_sync_sk+0x12f2/0x1c30 net/bluetooth/hci_sync.c:200
__hci_cmd_sync+0x55/0x80 net/bluetooth/hci_sync.c:223
btintel_hw_error+0x114/0x670 drivers/bluetooth/btintel.c:254
hci_error_reset+0x348/0xa30 net/bluetooth/hci_core.c:1030
write/free by task ioctl/22580:
btintel_shutdown_combined+0xd0/0x360
drivers/bluetooth/btintel.c:3648
hci_dev_close_sync+0x9ae/0x2c10 net/bluetooth/hci_sync.c:5246
hci_dev_do_close+0x232/0x460 net/bluetooth/hci_core.c:526
BUG: KASAN: slab-use-after-free in
sk_skb_reason_drop+0x43/0x380 net/core/skbuff.c:1202
Read of size 4 at addr ffff888144a738dc
by task kworker/u17:1/83:
__hci_cmd_sync_sk+0x12f2/0x1c30 net/bluetooth/hci_sync.c:200
__hci_cmd_sync+0x55/0x80 net/bluetooth/hci_sync.c:223
btintel_hw_error+0x186/0x670 drivers/bluetooth/btintel.c:260
Fixes: 973bb97e5aee ("Bluetooth: btintel: Add generic function for handling hardware errors")
Signed-off-by: Cen Zhang <zzzccc427@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 70b439bf06f6a12e491f827fa81a9887a11501f9 ]
Currently, enetc_get_ringparam() only provides rx_pending and tx_pending,
but 'ethtool --show-ring' no longer displays these fields. Because the
ringparam retrieval path has moved to the new netlink interface, where
rings_fill_reply() emits the *x_pending only if the *x_max_pending values
are non-zero. So rx_max_pending and tx_max_pending to are added to
enetc_get_ringparam() to fix the issue.
Note that the maximum tx/rx ring size of hardware is 64K, but we haven't
added set_ringparam() to make the ring size configurable. To avoid users
mistakenly believing that the ring size can be increased, so set
the *x_max_pending to priv->*x_bd_count.
Fixes: e4a1717b677c ("ethtool: provide ring sizes with RINGS_GET request")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260320094222.706339-1-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2526e440df2725e7328d59b835a164826f179b93 ]
ice_repr_get_stats64() and __ice_get_ethtool_stats() call
ice_update_vsi_stats() on the VF's src_vsi. This always returns early
because ICE_VSI_DOWN is permanently set for VF VSIs - ice_up() is never
called on them since queues are managed by iavf through virtchnl.
In __ice_get_ethtool_stats() the original code called
ice_update_vsi_stats() for all VSIs including representors, iterated
over ice_gstrings_vsi_stats[] to populate the data, and then bailed out
with an early return before the per-queue ring stats section. That early
return was necessary because representor VSIs have no rings on the PF
side - the rings belong to the VF driver (iavf), so accessing per-queue
stats would be invalid.
Move the representor handling to the top of __ice_get_ethtool_stats()
and call ice_update_eth_stats() directly to read the hardware GLV_*
counters. This matches ice_get_vf_stats() which already uses
ice_update_eth_stats() for the same VF VSI in legacy mode. Apply the
same fix to ice_repr_get_stats64().
Note that ice_gstrings_vsi_stats[] contains five software ring counters
(rx_buf_failed, rx_page_failed, tx_linearize, tx_busy, tx_restart) that
are always zero for representors since the PF never processes packets on
VF rings. This is pre-existing behavior unchanged by this patch.
Fixes: 7aae80cef7ba ("ice: add port representor ethtool ops and stats")
Signed-off-by: Petr Oros <poros@redhat.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Patryk Holda <patryk.holda@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2061f7b042f88d372cca79615f8425f3564c0b40 ]
The command length check validates inlen (> 5), but the error message
incorrectly printed resp_len. Print inlen so the log reflects the
actual command length.
Fixes: 0c3d931b3ab9e ("Platform: OLPC: Add XO-1.75 EC driver")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Acked-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20260310130138.700687-1-alok.a.tiwari@oracle.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit cbcb3cfcdc436d6f91a3d95ecfa9c831abe14aed ]
The use of IONIC_CMD_LIF_SETATTR in the MAC address update path causes
the ionic firmware to update the LIF's identity in its persistent state.
Since the firmware state is maintained across host warm boots and driver
reloads, any MAC change on the Physical Function (PF) becomes "sticky.
This is problematic because it causes ethtool -P to report the
user-configured MAC as the permanent factory address, which breaks
system management tools that rely on a stable hardware identity.
While Virtual Functions (VFs) need this hardware-level programming to
properly handle MAC assignments in guest environments, the PF should
maintain standard transient behavior. This patch gates the
ionic_program_mac call using is_virtfn so that PF MAC changes remain
local to the netdev filters and do not overwrite the firmware's
permanent identity block.
Fixes: 19058be7c48c ("ionic: VF initial random MAC address if no assigned mac")
Signed-off-by: Mohammad Heib <mheib@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Link: https://patch.msgid.link/20260317170806.35390-1-mheib@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
