summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2019-10-02ptp_qoriq: Initialize the registers' spinlock before calling ptp_qoriq_settimeVladimir Oltean1-1/+2
Because ptp_qoriq_settime is being called prior to spin_lock_init, the following stack trace can be seen at driver probe time: [ 2.269117] the code is fine but needs lockdep annotation. [ 2.274569] turning off the locking correctness validator. [ 2.280027] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.3.0-rc7-01478-g01eaa67a4797 #263 [ 2.288073] Hardware name: Freescale LS1021A [ 2.292337] [<c0313cb4>] (unwind_backtrace) from [<c030e11c>] (show_stack+0x10/0x14) [ 2.300045] [<c030e11c>] (show_stack) from [<c1219440>] (dump_stack+0xcc/0xf8) [ 2.307235] [<c1219440>] (dump_stack) from [<c03b9b44>] (register_lock_class+0x730/0x73c) [ 2.315372] [<c03b9b44>] (register_lock_class) from [<c03b6190>] (__lock_acquire+0x78/0x270c) [ 2.323856] [<c03b6190>] (__lock_acquire) from [<c03b90cc>] (lock_acquire+0xe0/0x22c) [ 2.331649] [<c03b90cc>] (lock_acquire) from [<c123c310>] (_raw_spin_lock_irqsave+0x54/0x68) [ 2.340048] [<c123c310>] (_raw_spin_lock_irqsave) from [<c0e73fe4>] (ptp_qoriq_settime+0x38/0x80) [ 2.348878] [<c0e73fe4>] (ptp_qoriq_settime) from [<c0e746d4>] (ptp_qoriq_init+0x1f8/0x484) [ 2.357189] [<c0e746d4>] (ptp_qoriq_init) from [<c0e74aac>] (ptp_qoriq_probe+0xd0/0x184) [ 2.365243] [<c0e74aac>] (ptp_qoriq_probe) from [<c0b0a07c>] (platform_drv_probe+0x48/0x9c) [ 2.373555] [<c0b0a07c>] (platform_drv_probe) from [<c0b07a14>] (really_probe+0x1c4/0x400) [ 2.381779] [<c0b07a14>] (really_probe) from [<c0b07e28>] (driver_probe_device+0x78/0x1b8) [ 2.390003] [<c0b07e28>] (driver_probe_device) from [<c0b081d0>] (device_driver_attach+0x58/0x60) [ 2.398832] [<c0b081d0>] (device_driver_attach) from [<c0b082d4>] (__driver_attach+0xfc/0x160) [ 2.407402] [<c0b082d4>] (__driver_attach) from [<c0b05a84>] (bus_for_each_dev+0x68/0xb4) [ 2.415539] [<c0b05a84>] (bus_for_each_dev) from [<c0b06b68>] (bus_add_driver+0x104/0x20c) [ 2.423763] [<c0b06b68>] (bus_add_driver) from [<c0b0909c>] (driver_register+0x78/0x10c) [ 2.431815] [<c0b0909c>] (driver_register) from [<c030313c>] (do_one_initcall+0x8c/0x3ac) [ 2.439954] [<c030313c>] (do_one_initcall) from [<c1f013f4>] (kernel_init_freeable+0x468/0x548) [ 2.448610] [<c1f013f4>] (kernel_init_freeable) from [<c12344d8>] (kernel_init+0x8/0x10c) [ 2.456745] [<c12344d8>] (kernel_init) from [<c03010b4>] (ret_from_fork+0x14/0x20) [ 2.464273] Exception stack(0xea89ffb0 to 0xea89fff8) [ 2.469297] ffa0: 00000000 00000000 00000000 00000000 [ 2.477432] ffc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 2.485566] ffe0: 00000000 00000000 00000000 00000000 00000013 00000000 Fixes: ff54571a747b ("ptp_qoriq: convert to use ptp_qoriq_init/free") Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-02net: dsa: sja1105: Fix sleeping while atomic in .port_hwtstamp_setVladimir Oltean1-8/+11
Currently this stack trace can be seen with CONFIG_DEBUG_ATOMIC_SLEEP=y: [ 41.568348] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:909 [ 41.576757] in_atomic(): 1, irqs_disabled(): 0, pid: 208, name: ptp4l [ 41.583212] INFO: lockdep is turned off. [ 41.587123] CPU: 1 PID: 208 Comm: ptp4l Not tainted 5.3.0-rc6-01445-ge950f2d4bc7f-dirty #1827 [ 41.599873] [<c0313d7c>] (unwind_backtrace) from [<c030e13c>] (show_stack+0x10/0x14) [ 41.607584] [<c030e13c>] (show_stack) from [<c1212d50>] (dump_stack+0xd4/0x100) [ 41.614863] [<c1212d50>] (dump_stack) from [<c037dfc8>] (___might_sleep+0x1c8/0x2b4) [ 41.622574] [<c037dfc8>] (___might_sleep) from [<c122ea90>] (__mutex_lock+0x48/0xab8) [ 41.630368] [<c122ea90>] (__mutex_lock) from [<c122f51c>] (mutex_lock_nested+0x1c/0x24) [ 41.638340] [<c122f51c>] (mutex_lock_nested) from [<c0c6fe08>] (sja1105_static_config_reload+0x30/0x27c) [ 41.647779] [<c0c6fe08>] (sja1105_static_config_reload) from [<c0c7015c>] (sja1105_hwtstamp_set+0x108/0x1cc) [ 41.657562] [<c0c7015c>] (sja1105_hwtstamp_set) from [<c0feb650>] (dev_ifsioc+0x18c/0x330) [ 41.665788] [<c0feb650>] (dev_ifsioc) from [<c0febbd8>] (dev_ioctl+0x320/0x6e8) [ 41.673064] [<c0febbd8>] (dev_ioctl) from [<c0f8b1f4>] (sock_ioctl+0x334/0x5e8) [ 41.680340] [<c0f8b1f4>] (sock_ioctl) from [<c05404a8>] (do_vfs_ioctl+0xb0/0xa10) [ 41.687789] [<c05404a8>] (do_vfs_ioctl) from [<c0540e3c>] (ksys_ioctl+0x34/0x58) [ 41.695151] [<c0540e3c>] (ksys_ioctl) from [<c0301000>] (ret_fast_syscall+0x0/0x28) [ 41.702768] Exception stack(0xe8495fa8 to 0xe8495ff0) [ 41.707796] 5fa0: beff4a8c 00000001 00000011 000089b0 beff4a8c beff4a80 [ 41.715933] 5fc0: beff4a8c 00000001 0000000c 00000036 b6fa98c8 004e19c1 00000001 00000000 [ 41.724069] 5fe0: 004dcedc beff4a6c 004c0738 b6e7af4c [ 41.729860] BUG: scheduling while atomic: ptp4l/208/0x00000002 [ 41.735682] INFO: lockdep is turned off. Enabling RX timestamping will logically disturb the fastpath (processing of meta frames). Replace bool hwts_rx_en with a bit that is checked atomically from the fastpath and temporarily unset from the sleepable context during a change of the RX timestamping process (a destructive operation anyways, requires switch reset). If found unset, the fastpath (net/dsa/tag_sja1105.c) will just drop any received meta frame and not take the meta_lock at all. Fixes: a602afd200f5 ("net: dsa: sja1105: Expose PTP timestamping ioctls to userspace") Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-02net: dsa: sja1105: Initialize the meta_lockVladimir Oltean1-0/+1
Otherwise, with CONFIG_DEBUG_SPINLOCK=y, this stack trace gets printed when enabling RX timestamping and receiving a PTP frame: [ 318.537078] INFO: trying to register non-static key. [ 318.542040] the code is fine but needs lockdep annotation. [ 318.547500] turning off the locking correctness validator. [ 318.552972] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.3.0-13257-g0825b0669811-dirty #1962 [ 318.561283] Hardware name: Freescale LS1021A [ 318.565566] [<c03144bc>] (unwind_backtrace) from [<c030e164>] (show_stack+0x10/0x14) [ 318.573289] [<c030e164>] (show_stack) from [<c11b9f50>] (dump_stack+0xd4/0x100) [ 318.580579] [<c11b9f50>] (dump_stack) from [<c03b9b40>] (register_lock_class+0x728/0x734) [ 318.588731] [<c03b9b40>] (register_lock_class) from [<c03b60c4>] (__lock_acquire+0x78/0x25cc) [ 318.597227] [<c03b60c4>] (__lock_acquire) from [<c03b8ef8>] (lock_acquire+0xd8/0x234) [ 318.605033] [<c03b8ef8>] (lock_acquire) from [<c11db934>] (_raw_spin_lock+0x44/0x54) [ 318.612755] [<c11db934>] (_raw_spin_lock) from [<c1164370>] (sja1105_rcv+0x1f8/0x4e8) [ 318.620561] [<c1164370>] (sja1105_rcv) from [<c115d7cc>] (dsa_switch_rcv+0x80/0x204) [ 318.628283] [<c115d7cc>] (dsa_switch_rcv) from [<c0f58c80>] (__netif_receive_skb_one_core+0x50/0x6c) [ 318.637386] [<c0f58c80>] (__netif_receive_skb_one_core) from [<c0f58f04>] (netif_receive_skb_internal+0xac/0x264) [ 318.647611] [<c0f58f04>] (netif_receive_skb_internal) from [<c0f59e98>] (napi_gro_receive+0x1d8/0x338) [ 318.656887] [<c0f59e98>] (napi_gro_receive) from [<c0c298a4>] (gfar_clean_rx_ring+0x328/0x724) [ 318.665472] [<c0c298a4>] (gfar_clean_rx_ring) from [<c0c29e60>] (gfar_poll_rx_sq+0x34/0x94) [ 318.673795] [<c0c29e60>] (gfar_poll_rx_sq) from [<c0f5b40c>] (net_rx_action+0x128/0x4f8) [ 318.681860] [<c0f5b40c>] (net_rx_action) from [<c03022f0>] (__do_softirq+0x148/0x5ac) [ 318.689666] [<c03022f0>] (__do_softirq) from [<c0355af4>] (irq_exit+0x160/0x170) [ 318.697040] [<c0355af4>] (irq_exit) from [<c03c6818>] (__handle_domain_irq+0x60/0xb4) [ 318.704847] [<c03c6818>] (__handle_domain_irq) from [<c07e9440>] (gic_handle_irq+0x58/0x9c) [ 318.713172] [<c07e9440>] (gic_handle_irq) from [<c0301a70>] (__irq_svc+0x70/0x98) [ 318.720622] Exception stack(0xc2001f18 to 0xc2001f60) [ 318.725656] 1f00: 00000001 00000006 [ 318.733805] 1f20: 00000000 c20165c0 ffffe000 c2010cac c2010cf4 00000001 00000000 c2010c88 [ 318.741955] 1f40: c1f7a5a8 00000000 00000000 c2001f68 c03ba140 c030a288 200e0013 ffffffff [ 318.750110] [<c0301a70>] (__irq_svc) from [<c030a288>] (arch_cpu_idle+0x24/0x3c) [ 318.757486] [<c030a288>] (arch_cpu_idle) from [<c038a480>] (do_idle+0x1b8/0x2a4) [ 318.764859] [<c038a480>] (do_idle) from [<c038a94c>] (cpu_startup_entry+0x18/0x1c) [ 318.772407] [<c038a94c>] (cpu_startup_entry) from [<c1e00f10>] (start_kernel+0x4cc/0x4fc) Fixes: 844d7edc6a34 ("net: dsa: sja1105: Add a global sja1105_tagger_data structure") Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-02net: dsa: rtl8366: Check VLAN ID and not portsLinus Walleij1-4/+7
There has been some confusion between the port number and the VLAN ID in this driver. What we need to check for validity is the VLAN ID, nothing else. The current confusion came from assigning a few default VLANs for default routing and we need to rewrite that properly. Instead of checking if the port number is a valid VLAN ID, check the actual VLAN IDs passed in to the callback one by one as expected. Fixes: d8652956cf37 ("net: dsa: realtek-smi: Add Realtek SMI driver") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-02mlx5: avoid 64-bit division in dr_icm_pool_mr_create()Michal Kubecek1-1/+2
Recently added code introduces 64-bit division in dr_icm_pool_mr_create() so that build on 32-bit architectures fails with ERROR: "__umoddi3" [drivers/net/ethernet/mellanox/mlx5/core/mlx5_core.ko] undefined! As the divisor is always a power of 2, we can use bitwise operation instead. Fixes: 29cf8febd185 ("net/mlx5: DR, ICM pool memory allocator") Reported-by: Borislav Petkov <bp@alien8.de> Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-02xen-netfront: do not use ~0U as error return value for xennet_fill_frags()Dongli Zhang1-8/+9
xennet_fill_frags() uses ~0U as return value when the sk_buff is not able to cache extra fragments. This is incorrect because the return type of xennet_fill_frags() is RING_IDX and 0xffffffff is an expected value for ring buffer index. In the situation when the rsp_cons is approaching 0xffffffff, the return value of xennet_fill_frags() may become 0xffffffff which xennet_poll() (the caller) would regard as error. As a result, queue->rx.rsp_cons is set incorrectly because it is updated only when there is error. If there is no error, xennet_poll() would be responsible to update queue->rx.rsp_cons. Finally, queue->rx.rsp_cons would point to the rx ring buffer entries whose queue->rx_skbs[i] and queue->grant_rx_ref[i] are already cleared to NULL. This leads to NULL pointer access in the next iteration to process rx ring buffer entries. The symptom is similar to the one fixed in commit 00b368502d18 ("xen-netfront: do not assume sk_buff_head list is empty in error handling"). This patch changes the return type of xennet_fill_frags() to indicate whether it is successful or failed. The queue->rx.rsp_cons will be always updated inside this function. Fixes: ad4f15dc2c70 ("xen/netfront: don't bug in case of too many frags") Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-02hso: fix NULL-deref on tty openJohan Hovold1-4/+8
Fix NULL-pointer dereference on tty open due to a failure to handle a missing interrupt-in endpoint when probing modem ports: BUG: kernel NULL pointer dereference, address: 0000000000000006 ... RIP: 0010:tiocmget_submit_urb+0x1c/0xe0 [hso] ... Call Trace: hso_start_serial_device+0xdc/0x140 [hso] hso_serial_open+0x118/0x1b0 [hso] tty_open+0xf1/0x490 Fixes: 542f54823614 ("tty: Modem functions for the HSO driver") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-01net: ag71xx: fix mdio subnode supportOleksij Rempel1-2/+4
This patch is syncing driver with actual devicetree documentation: Documentation/devicetree/bindings/net/qca,ar71xx.txt |Optional subnodes: |- mdio : specifies the mdio bus, used as a container for phy nodes | according to phy.txt in the same directory The driver was working with fixed phy without any noticeable issues. This bug was uncovered by introducing dsa ar9331-switch driver. Since no one reported this bug until now, I assume no body is using it and this patch should not brake existing system. Fixes: d51b6ce441d3 ("net: ethernet: add ag71xx driver") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-01net: stmmac: xgmac: Fix RSS writing wrong keysJose Abreu1-2/+3
Commit b6b6cc9acd7b, changed the call to dwxgmac2_rss_write_reg() passing it the variable cfg->key[i]. As key is an u8 but we write 32 bits at a time we need to cast it into an u32 so that the correct key values are written. Notice that the for loop already takes this into account so we don't try to write past the keys size. Fixes: b6b6cc9acd7b ("net: stmmac: selftest: avoid large stack usage") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-01net: stmmac: xgmac: Fix RSS not writing all Keys to HWJose Abreu1-1/+1
The sizeof(cfg->key) is != ARRAY_SIZE(cfg->key). Fix it. This warning is triggered when running with cc flag -Wsizeof-array-div. Reported-by: kbuild test robot <lkp@intel.com> Reported-by: Nick Desaulniers <ndesaulniers@google.com> Reported-by: Nathan Chancellor <natechancellor@gmail.com> Fixes: 76067459c686 ("net: stmmac: Implement RSS and enable it in XGMAC core") Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-01net: stmmac: xgmac: Disable the Timestamp interrupt by defaultJose Abreu1-1/+1
We don't use it anyway as XGMAC only supports polling for timestamp (in current SW implementation). This greatly reduces the system load by reducing the number of interrupts. Fixes: 2142754f8b9c ("net: stmmac: Add MAC related callbacks for XGMAC2") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-01net: stmmac: Do not stop PHY if WoL is enabledJose Abreu1-6/+12
If WoL is enabled we can't really stop the PHY, otherwise we will not receive the WoL packet. Fix this by telling phylink that only the MAC is down and only stop the PHY if WoL is not enabled. Fixes: 74371272f97f ("net: stmmac: Convert to phylink and remove phylib logic") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-01net: stmmac: Correctly take timestamp for PTPv2Jose Abreu1-0/+1
The case for PTPV2_EVENT requires event packets to be captured so add this setting to the list of enabled captures. Fixes: 891434b18ec0 ("stmmac: add IEEE PTPv1 and PTPv2 support.") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-01net: stmmac: dwmac4: Always update the MAC Hash FilterJose Abreu1-6/+7
We need to always update the MAC Hash Filter so that previous entries are invalidated. Found out while running stmmac selftests. Fixes: b8ef7020d6e5 ("net: stmmac: add support for hash table size 128/256 in dwmac4") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-01net: stmmac: selftests: Always use max DMA size in Jumbo TestJose Abreu1-4/+0
Although some XGMAC setups support frames larger than DMA size, some of them may not. As we can't know before-hand which ones support let's use the maximum DMA buffer size in the Jumbo Tests. User can always reconfigure the MTU to achieve larger frames. Fixes: 427849e8c37f ("net: stmmac: selftests: Add Jumbo Frame tests") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-01net: stmmac: xgmac: Detect Hash Table size dinamicallyJose Abreu2-0/+2
Since commit b8ef7020d6e5 ("net: stmmac: add support for hash table size 128/256 in dwmac4"), we can detect the Hash Table dinamically. Let's implement this feature in XGMAC cores and fix possible setups that don't support the maximum size for Hash Table. Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-01net: stmmac: xgmac: Not all Unicast addresses may be availableJose Abreu1-1/+1
Some setups may not have all Unicast addresses filters available. Let's check this before trying to setup filters. Fixes: 0efedbf11f07 ("net: stmmac: xgmac: Fix XGMAC selftests") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-01net: dsa: rtl8366rb: add missing of_node_put after calling of_get_child_by_nameWen Yang1-6/+10
of_node_put needs to be called when the device node which is got from of_get_child_by_name finished using. irq_domain_add_linear() also calls of_node_get() to increase refcount, so irq_domain will not be affected when it is released. Fixes: d8652956cf37 ("net: dsa: realtek-smi: Add Realtek SMI driver") Signed-off-by: Wen Yang <wenyang@linux.alibaba.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Vivien Didelot <vivien.didelot@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-01net: mscc: ocelot: add missing of_node_put after calling of_get_child_by_nameWen Yang1-6/+8
of_node_put needs to be called when the device node which is got from of_get_child_by_name finished using. In both cases of success and failure, we need to release 'ports', so clean up the code using goto. fixes: a556c76adc05 ("net: mscc: Add initial Ocelot switch support") Signed-off-by: Wen Yang <wenyang@linux.alibaba.com> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Microchip Linux Driver Support <UNGLinuxDriver@microchip.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-01ionic: select CONFIG_NET_DEVLINKArnd Bergmann1-0/+1
When no other driver selects the devlink library code, ionic produces a link failure: drivers/net/ethernet/pensando/ionic/ionic_devlink.o: In function `ionic_devlink_alloc': ionic_devlink.c:(.text+0xd): undefined reference to `devlink_alloc' drivers/net/ethernet/pensando/ionic/ionic_devlink.o: In function `ionic_devlink_register': ionic_devlink.c:(.text+0x71): undefined reference to `devlink_register' Add the same 'select' statement that the other drivers use here. Fixes: fbfb8031533c ("ionic: Add hardware init and device commands") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-01net: socionext: netsec: always grab descriptor lockLorenzo Bianconi1-23/+7
Always acquire tx descriptor spinlock even if a xdp program is not loaded on the netsec device since ndo_xdp_xmit can run concurrently with netsec_netdev_start_xmit and netsec_clean_tx_dring. This can happen loading a xdp program on a different device (e.g virtio-net) and xdp_do_redirect_map/xdp_do_redirect_slow can redirect to netsec even if we do not have a xdp program on it. Fixes: ba2b232108d3 ("net: netsec: add XDP support") Tested-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-01net: dsa: sja1105: Prevent leaking memoryNavid Emamdoost1-2/+4
In sja1105_static_config_upload, in two cases memory is leaked: when static_config_buf_prepare_for_upload fails and when sja1105_inhibit_tx fails. In both cases config_buf should be released. Fixes: 8aa9ebccae87 ("net: dsa: Introduce driver for NXP SJA1105 5-port L2 switch") Fixes: 1a4c69406cc1 ("net: dsa: sja1105: Prevent PHY jabbering during switch reset") Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-01net: dsa: sja1105: Ensure PTP time for rxtstamp reconstruction is not in the ↵Vladimir Oltean1-2/+2
past Sometimes the PTP synchronization on the switch 'jumps': ptp4l[11241.155]: rms 8 max 16 freq -21732 +/- 11 delay 742 +/- 0 ptp4l[11243.157]: rms 7 max 17 freq -21731 +/- 10 delay 744 +/- 0 ptp4l[11245.160]: rms 33592410 max 134217731 freq +192422 +/- 8530253 delay 743 +/- 0 ptp4l[11247.163]: rms 811631 max 964131 freq +10326 +/- 557785 delay 743 +/- 0 ptp4l[11249.166]: rms 261936 max 533876 freq -304323 +/- 126371 delay 744 +/- 0 ptp4l[11251.169]: rms 48700 max 57740 freq -20218 +/- 30532 delay 744 +/- 0 ptp4l[11253.171]: rms 14570 max 30163 freq -5568 +/- 7563 delay 742 +/- 0 ptp4l[11255.174]: rms 2914 max 3440 freq -22001 +/- 1667 delay 744 +/- 1 ptp4l[11257.177]: rms 811 max 1710 freq -22653 +/- 451 delay 744 +/- 1 ptp4l[11259.180]: rms 177 max 218 freq -21695 +/- 89 delay 741 +/- 0 ptp4l[11261.182]: rms 45 max 92 freq -21677 +/- 32 delay 742 +/- 0 ptp4l[11263.186]: rms 14 max 32 freq -21733 +/- 11 delay 742 +/- 0 ptp4l[11265.188]: rms 9 max 14 freq -21725 +/- 12 delay 742 +/- 0 ptp4l[11267.191]: rms 9 max 16 freq -21727 +/- 13 delay 742 +/- 0 ptp4l[11269.194]: rms 6 max 15 freq -21726 +/- 9 delay 743 +/- 0 ptp4l[11271.197]: rms 8 max 15 freq -21728 +/- 11 delay 743 +/- 0 ptp4l[11273.200]: rms 6 max 12 freq -21727 +/- 8 delay 743 +/- 0 ptp4l[11275.202]: rms 9 max 17 freq -21720 +/- 11 delay 742 +/- 0 ptp4l[11277.205]: rms 9 max 18 freq -21725 +/- 12 delay 742 +/- 0 Background: the switch only offers partial RX timestamps (24 bits) and it is up to the driver to read the PTP clock to fill those timestamps up to 64 bits. But the PTP clock readout needs to happen quickly enough (in 0.135 seconds, in fact), otherwise the PTP clock will wrap around 24 bits, condition which cannot be detected. Looking at the 'max 134217731' value on output line 3, one can see that in hex it is 0x8000003. Because the PTP clock resolution is 8 ns, that means 0x1000000 in ticks, which is exactly 2^24. So indeed this is a PTP clock wraparound, but the reason might be surprising. What is going on is that sja1105_tstamp_reconstruct(priv, now, ts) expects a "now" time that is later than the "ts" was snapshotted at. This, of course, is obvious: we read the PTP time _after_ the partial RX timestamp was received. However, the workqueue is processing frames from a skb queue and reuses the same PTP time, read once at the beginning. Normally the skb queue only contains one frame and all goes well. But when the skb queue contains two frames, the second frame that gets dequeued might have been partially timestamped by the RX MAC _after_ we had read our PTP time initially. The code was originally like that due to concerns that SPI access for PTP time readout is a slow process, and we are time-constrained anyway (aka: premature optimization). But some timing analysis reveals that the time spent until the RX timestamp is completely reconstructed is 1 order of magnitude lower than the 0.135 s deadline even under worst-case conditions. So we can afford to read the PTP time for each frame in the RX timestamping queue, which of course ensures that the full PTP time is in the partial timestamp's future. Fixes: f3097be21bf1 ("net: dsa: sja1105: Add a state machine for RX timestamping") Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-01Merge tag 'ieee802154-for-davem-2019-09-28' of ↵David S. Miller3-3/+4
git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan Stefan Schmidt says: ==================== pull-request: ieee802154 for net 2019-09-28 An update from ieee802154 for your *net* tree. Three driver fixes. Navid Emamdoost fixed a memory leak on an error path in the ca8210 driver, Johan Hovold fixed a use-after-free found by syzbot in the atusb driver and Christophe JAILLET makes sure __skb_put_data is used instead of memcpy in the mcr20a driver I switched from branches to tags here to be pulled from. So far not annotated and not signed. Once I fixed my scripts it should contain this messages as annotations. If you want it signed as well just tell me. If there are any problems let me know. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-30net: dsa: qca8k: Use up to 7 ports for all operationsMichal Vokáč1-2/+2
The QCA8K family supports up to 7 ports. So use the existing QCA8K_NUM_PORTS define to allocate the switch structure and limit all operations with the switch ports. This was not an issue until commit 0394a63acfe2 ("net: dsa: enable and disable all ports") disabled all unused ports. Since the unused ports 7-11 are outside of the correct register range on this switch some registers were rewritten with invalid content. Fixes: 6b93fb46480a ("net-next: dsa: add new driver for qca8xxx family") Fixes: a0c02161ecfc ("net: dsa: variable number of ports") Fixes: 0394a63acfe2 ("net: dsa: enable and disable all ports") Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds87-917/+645
Pull networking fixes from David Miller: 1) Sanity check URB networking device parameters to avoid divide by zero, from Oliver Neukum. 2) Disable global multicast filter in NCSI, otherwise LLDP and IPV6 don't work properly. Longer term this needs a better fix tho. From Vijay Khemka. 3) Small fixes to selftests (use ping when ping6 is not present, etc.) from David Ahern. 4) Bring back rt_uses_gateway member of struct rtable, it's semantics were not well understood and trying to remove it broke things. From David Ahern. 5) Move usbnet snaity checking, ignore endpoints with invalid wMaxPacketSize. From Bjørn Mork. 6) Missing Kconfig deps for sja1105 driver, from Mao Wenan. 7) Various small fixes to the mlx5 DR steering code, from Alaa Hleihel, Alex Vesker, and Yevgeny Kliteynik 8) Missing CAP_NET_RAW checks in various places, from Ori Nimron. 9) Fix crash when removing sch_cbs entry while offloading is enabled, from Vinicius Costa Gomes. 10) Signedness bug fixes, generally in looking at the result given by of_get_phy_mode() and friends. From Dan Crapenter. 11) Disable preemption around BPF_PROG_RUN() calls, from Eric Dumazet. 12) Don't create VRF ipv6 rules if ipv6 is disabled, from David Ahern. 13) Fix quantization code in tcp_bbr, from Kevin Yang. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (127 commits) net: tap: clean up an indentation issue nfp: abm: fix memory leak in nfp_abm_u32_knode_replace tcp: better handle TCP_USER_TIMEOUT in SYN_SENT state sk_buff: drop all skb extensions on free and skb scrubbing tcp_bbr: fix quantization code to not raise cwnd if not probing bandwidth mlxsw: spectrum_flower: Fail in case user specifies multiple mirror actions Documentation: Clarify trap's description mlxsw: spectrum: Clear VLAN filters during port initialization net: ena: clean up indentation issue NFC: st95hf: clean up indentation issue net: phy: micrel: add Asym Pause workaround for KSZ9021 net: socionext: ave: Avoid using netdev_err() before calling register_netdev() ptp: correctly disable flags on old ioctls lib: dimlib: fix help text typos net: dsa: microchip: Always set regmap stride to 1 nfp: flower: fix memory leak in nfp_flower_spawn_vnic_reprs nfp: flower: prevent memory leak in nfp_flower_spawn_phy_reprs net/sched: Set default of CONFIG_NET_TC_SKB_EXT to N vrf: Do not attempt to create IPv6 mcast rule if IPv6 is disabled net: sched: sch_sfb: don't call qdisc_put() while holding tree lock ...
2019-09-28Merge branch 'next-lockdown' of ↵Linus Torvalds10-6/+77
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull kernel lockdown mode from James Morris: "This is the latest iteration of the kernel lockdown patchset, from Matthew Garrett, David Howells and others. From the original description: This patchset introduces an optional kernel lockdown feature, intended to strengthen the boundary between UID 0 and the kernel. When enabled, various pieces of kernel functionality are restricted. Applications that rely on low-level access to either hardware or the kernel may cease working as a result - therefore this should not be enabled without appropriate evaluation beforehand. The majority of mainstream distributions have been carrying variants of this patchset for many years now, so there's value in providing a doesn't meet every distribution requirement, but gets us much closer to not requiring external patches. There are two major changes since this was last proposed for mainline: - Separating lockdown from EFI secure boot. Background discussion is covered here: https://lwn.net/Articles/751061/ - Implementation as an LSM, with a default stackable lockdown LSM module. This allows the lockdown feature to be policy-driven, rather than encoding an implicit policy within the mechanism. The new locked_down LSM hook is provided to allow LSMs to make a policy decision around whether kernel functionality that would allow tampering with or examining the runtime state of the kernel should be permitted. The included lockdown LSM provides an implementation with a simple policy intended for general purpose use. This policy provides a coarse level of granularity, controllable via the kernel command line: lockdown={integrity|confidentiality} Enable the kernel lockdown feature. If set to integrity, kernel features that allow userland to modify the running kernel are disabled. If set to confidentiality, kernel features that allow userland to extract confidential information from the kernel are also disabled. This may also be controlled via /sys/kernel/security/lockdown and overriden by kernel configuration. New or existing LSMs may implement finer-grained controls of the lockdown features. Refer to the lockdown_reason documentation in include/linux/security.h for details. The lockdown feature has had signficant design feedback and review across many subsystems. This code has been in linux-next for some weeks, with a few fixes applied along the way. Stephen Rothwell noted that commit 9d1f8be5cf42 ("bpf: Restrict bpf when kernel lockdown is in confidentiality mode") is missing a Signed-off-by from its author. Matthew responded that he is providing this under category (c) of the DCO" * 'next-lockdown' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (31 commits) kexec: Fix file verification on S390 security: constify some arrays in lockdown LSM lockdown: Print current->comm in restriction messages efi: Restrict efivar_ssdt_load when the kernel is locked down tracefs: Restrict tracefs when the kernel is locked down debugfs: Restrict debugfs when the kernel is locked down kexec: Allow kexec_file() with appropriate IMA policy when locked down lockdown: Lock down perf when in confidentiality mode bpf: Restrict bpf when kernel lockdown is in confidentiality mode lockdown: Lock down tracing and perf kprobes when in confidentiality mode lockdown: Lock down /proc/kcore x86/mmiotrace: Lock down the testmmiotrace module lockdown: Lock down module params that specify hardware parameters (eg. ioport) lockdown: Lock down TIOCSSERIAL lockdown: Prohibit PCMCIA CIS storage when the kernel is locked down acpi: Disable ACPI table override if the kernel is locked down acpi: Ignore acpi_rsdp kernel param when the kernel has been locked down ACPI: Limit access to custom_method when the kernel is locked down x86/msr: Restrict MSR access when the kernel is locked down x86: Lock down IO port access when the kernel is locked down ...
2019-09-27ieee802154: ca8210: prevent memory leakNavid Emamdoost1-1/+1
In ca8210_probe the allocated pdata needs to be assigned to spi_device->dev.platform_data before calling ca8210_get_platform_data. Othrwise when ca8210_get_platform_data fails pdata cannot be released. Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Link: https://lore.kernel.org/r/20190917224713.26371-1-navid.emamdoost@gmail.com Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
2019-09-27Merge tag 'pwm/for-5.4-rc1' of ↵Linus Torvalds27-234/+529
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm updates from Thierry Reding: "Besides one new driver being added for the PWM controller found in various Spreadtrum SoCs, this series of changes brings a slew of, mostly minor, fixes and cleanups for existing drivers, as well as some enhancements to the core code. Lastly, Uwe is added to the PWM subsystem entry of the MAINTAINERS file, making official his role as a reviewer" * tag 'pwm/for-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (34 commits) MAINTAINERS: Add myself as reviewer for the PWM subsystem MAINTAINERS: Add patchwork link for PWM entry MAINTAINERS: Add a selection of PWM related keywords to the PWM entry pwm: mediatek: Add MT7629 compatible string dt-bindings: pwm: Update bindings for MT7629 SoC pwm: mediatek: Update license and switch to SPDX tag pwm: mediatek: Use pwm_mediatek as common prefix pwm: mediatek: Allocate the clks array dynamically pwm: mediatek: Remove the has_clks field pwm: mediatek: Drop the check for of_device_get_match_data() pwm: atmel: Consolidate driver data initialization pwm: atmel: Remove unneeded check for match data pwm: atmel: Remove platform_device_id and use only dt bindings pwm: stm32-lp: Add check in case requested period cannot be achieved pwm: Ensure pwm_apply_state() doesn't modify the state argument pwm: fsl-ftm: Don't update the state for the caller of pwm_apply_state() pwm: sun4i: Don't update the state for the caller of pwm_apply_state() pwm: rockchip: Don't update the state for the caller of pwm_apply_state() pwm: Let pwm_get_state() return the last implemented state pwm: Introduce local struct pwm_chip in pwm_apply_state() ...
2019-09-27net: tap: clean up an indentation issueColin Ian King1-1/+1
There is a statement that is indented too deeply, remove the extraneous tab. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-27nfp: abm: fix memory leak in nfp_abm_u32_knode_replaceNavid Emamdoost1-4/+10
In nfp_abm_u32_knode_replace if the allocation for match fails it should go to the error handling instead of returning. Updated other gotos to have correct errno returned, too. Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-27Merge branch 'for-5.4' of ↵Linus Torvalds14-57/+176
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal management updates from Zhang Rui: - Add Amit Kucheria as thermal subsystem Reviewer (Amit Kucheria) - Fix a use after free bug when unregistering thermal zone devices (Ido Schimmel) - Fix thermal core framework to use put_device() when device_register() fails (Yue Hu) - Enable intel_pch_thermal and MMIO RAPL support for Intel Icelake platform (Srinivas Pandruvada) - Add clock operations in qorip thermal driver, for some platforms with clock control like i.MX8MQ (Anson Huang) - A couple of trivial fixes and cleanups for thermal core and different soc thermal drivers (Amit Kucheria, Christophe JAILLET, Chuhong Yuan, Fuqian Huang, Kelsey Skunberg, Nathan Huckleberry, Rishi Gupta, Srinivas Kandagatla) * 'for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: MAINTAINERS: Add Amit Kucheria as reviewer for thermal thermal: Add some error messages thermal: Fix use-after-free when unregistering thermal zone device thermal/drivers/core: Use put_device() if device_register() fails thermal_hwmon: Sanitize thermal_zone type thermal: intel: Use dev_get_drvdata thermal: intel: int3403: replace printk(KERN_WARN...) with pr_warn(...) thermal: intel: int340x_thermal: Remove unnecessary acpi_has_method() uses thermal: int340x: processor_thermal: Add Ice Lake support drivers: thermal: qcom: tsens: Fix memory leak from qfprom read thermal: tegra: Fix a typo thermal: rcar_gen3_thermal: Replace devm_add_action() followed by failure action with devm_add_action_or_reset() thermal: armada: Fix -Wshift-negative-value dt-bindings: thermal: qoriq: Add optional clocks property thermal: qoriq: Use __maybe_unused instead of #if CONFIG_PM_SLEEP thermal: qoriq: Use devm_platform_ioremap_resource() instead of of_iomap() thermal: qoriq: Fix error path of calling qoriq_tmu_register_tmu_zone fail thermal: qoriq: Add clock operations drivers: thermal: processor_thermal_device: Export sysfs interface for TCC offset
2019-09-27mlxsw: spectrum_flower: Fail in case user specifies multiple mirror actionsDanielle Ratson1-0/+6
The ASIC can only mirror a packet to one port, but when user is trying to set more than one mirror action, it doesn't fail. Add a check if more than one mirror action was specified per rule and if so, fail for not being supported. Fixes: d0d13c1858a11 ("mlxsw: spectrum_acl: Add support for mirror action") Signed-off-by: Danielle Ratson <danieller@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-27mlxsw: spectrum: Clear VLAN filters during port initializationIdo Schimmel1-0/+9
When a port is created, its VLAN filters are not cleared by the firmware. This causes tagged packets to be later dropped by the ingress STP filters, which default to DISCARD state. The above did not matter much until commit b5ce611fd96e ("mlxsw: spectrum: Add devlink-trap support") where we exposed the drop reason to users. Without this patch, the drop reason users will see is not consistent. If a port is enslaved to a VLAN-aware bridge and a packet with an invalid VLAN tries to ingress the bridge, it will be dropped due to ingress STP filter. If the VLAN is later enabled and then disabled, the packet will be dropped by the ingress VLAN filter despite the above being a seemingly NOP operation. Fix this by clearing all the VLAN filters during port initialization. Adjust the test accordingly. Fixes: b5ce611fd96e ("mlxsw: spectrum: Add devlink-trap support") Reported-by: Alex Kushnarov <alexanderk@mellanox.com> Tested-by: Alex Kushnarov <alexanderk@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-27net: ena: clean up indentation issueColin Ian King1-2/+2
There memset is indented incorrectly, remove the extraneous tabs. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-27NFC: st95hf: clean up indentation issueColin Ian King1-1/+1
The return statement is indented incorrectly, add in a missing tab and remove an extraneous space after the return Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-27net: phy: micrel: add Asym Pause workaround for KSZ9021Hans Andersson1-0/+3
The Micrel KSZ9031 PHY may fail to establish a link when the Asymmetric Pause capability is set. This issue is described in a Silicon Errata (DS80000691D or DS80000692D), which advises to always disable the capability. Micrel KSZ9021 has no errata, but has the same issue with Asymmetric Pause. This patch apply the same workaround as the one for KSZ9031. Fixes: 3aed3e2a143c ("net: phy: micrel: add Asym Pause workaround") Signed-off-by: Hans Andersson <hans.andersson@cellavision.se> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-27net: socionext: ave: Avoid using netdev_err() before calling register_netdev()Kunihiko Hayashi1-3/+3
Until calling register_netdev(), ndev->dev_name isn't specified, and netdev_err() displays "(unnamed net_device)". ave 65000000.ethernet (unnamed net_device) (uninitialized): invalid phy-mode setting ave: probe of 65000000.ethernet failed with error -22 This replaces netdev_err() with dev_err() before calling register_netdev(). Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-27ptp: correctly disable flags on old ioctlsJacob Keller1-2/+2
Commit 415606588c61 ("PTP: introduce new versions of IOCTLs", 2019-09-13) introduced new versions of the PTP ioctls which actually validate that the flags are acceptable values. As part of this, it cleared the flags value using a bitwise and+negation, in an attempt to prevent the old ioctl from accidentally enabling new features. This is incorrect for a couple of reasons. First, it results in accidentally preventing previously working flags on the request ioctl. By clearing the "valid" flags, we now no longer allow setting the enable, rising edge, or falling edge flags. Second, if we add new additional flags in the future, they must not be set by the old ioctl. (Since the flag wasn't checked before, we could potentially break userspace programs which sent garbage flag data. The correct way to resolve this is to check for and clear all but the originally valid flags. Create defines indicating which flags are correctly checked and interpreted by the original ioctls. Use these to clear any bits which will not be correctly interpreted by the original ioctls. In the future, new flags must be added to the VALID_FLAGS macros, but *not* to the V1_VALID_FLAGS macros. In this way, new features may be exposed over the v2 ioctls, but without breaking previous userspace which happened to not clear the flags value properly. The old ioctl will continue to behave the same way, while the new ioctl gains the benefit of using the flags fields. Cc: Richard Cochran <richardcochran@gmail.com> Cc: Felipe Balbi <felipe.balbi@linux.intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Christopher Hall <christopher.s.hall@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-27net: dsa: microchip: Always set regmap stride to 1Marek Vasut1-1/+1
The regmap stride is set to 1 for regmap describing 8bit registers already. However, for 16/32/64bit registers, the stride is 2/4/8 respectively. This is not correct, as the switch protocol supports unaligned register reads and writes and the KSZ87xx even uses such unaligned register accesses to read e.g. MIB counter. This patch fixes MIB counter access on KSZ87xx. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andrew Lunn <andrew@lunn.ch> Cc: David S. Miller <davem@davemloft.net> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: George McCollister <george.mccollister@gmail.com> Cc: Tristram Ha <Tristram.Ha@microchip.com> Cc: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Cc: Woojung Huh <woojung.huh@microchip.com> Fixes: 46558d601cb6 ("net: dsa: microchip: Initial SPI regmap support") Fixes: 255b59ad0db2 ("net: dsa: microchip: Factor out regmap config generation into common header") Reviewed-by: George McCollister <george.mccollister@gmail.com> Tested-by: George McCollister <george.mccollister@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-27Merge tag 'linux-watchdog-5.4-rc1' of ↵Linus Torvalds17-889/+648
git://www.linux-watchdog.org/linux-watchdog Pull watchdog updates from Wim Van Sebroeck: - addition of AST2600, i.MX7ULP and F81803 watchdog support - removal of the w90x900 and ks8695 drivers - ziirave_wdt improvements - small fixes and improvements * tag 'linux-watchdog-5.4-rc1' of git://www.linux-watchdog.org/linux-watchdog: (51 commits) watchdog: f71808e_wdt: Add F81803 support watchdog: qcom: remove unnecessary variable from private storage watchdog: qcom: support pre-timeout when the bark irq is available watchdog: imx_sc: this patch just fixes whitespaces watchdog: apseed: Add access_cs0 option for alt-boot watchdog: aspeed: add support for dual boot watchdog: orion_wdt: use timer1 as a pretimeout watchdog: Add i.MX7ULP watchdog support dt-bindings: watchdog: Add i.MX7ULP bindings dt-bindings: watchdog: sun4i: Add the watchdog clock dt-bindings: watchdog: sun4i: Add the watchdog interrupts dt-bindings: watchdog: Convert Allwinner watchdog to a schema dt-bindings: watchdog: Add YAML schemas for the generic watchdog bindings watchdog: aspeed: Add support for AST2600 dt-bindings: watchdog: Add ast2600 compatible watchdog: ziirave_wdt: Update checked I2C functionality mask watchdog: ziirave_wdt: Drop ziirave_firm_write_block_data() watchdog: ziirave_wdt: Fix DOWNLOAD_START payload watchdog: ziirave_wdt: Drop status polling code watchdog: ziirave_wdt: Fix RESET_PROCESSOR payload ...
2019-09-27Merge tag 'drm-next-2019-09-27' of git://anongit.freedesktop.org/drm/drmLinus Torvalds44-138/+436
Pull drm fixes from Dave Airlie: "Fixes built up over the past 1.5 weeks or so, it's two weeks of amdgpu, some core cleanups and some panfrost fixes. I also finally figured out why my desktop was slow to do a bunch of stuff (someone gave it an IPv6 address which can't reach anything!). core: - Some cleanups and fixes in the self-refresh helpers - Some cleanups and fixes in the atomic helpers amdgpu: - Fix a 64 bit divide - Prevent a memory leak in a failure case in dc - Load proper gfx firmware on navi14 variants - Add more navi12 and navi14 PCI ids - Misc fixes for renoir - Fix bandwidth issues with multiple displays on vega20 - Support for Dali - Fix a possible oops with KFD on hawaii - Fix for backlight level after resume on some APUs - Other misc fixes panfrost: - Multiple panfrost fixes for regulator support and page fault handling" * tag 'drm-next-2019-09-27' of git://anongit.freedesktop.org/drm/drm: (34 commits) drm/amd/display: prevent memory leak drm/amdgpu/gfx10: add support for wks firmware loading drm/amdgpu/display: include slab.h in dcn21_resource.c drm/amdgpu/display: fix 64 bit divide drm/panfrost: Prevent race when handling page fault drm/panfrost: Remove NULL checks for regulator drm/panfrost: Fix regulator_get_optional() misuse drm: Measure Self Refresh Entry/Exit times to avoid thrashing drm: Fix kerneldoc and remove unused struct member in self_refresh helper drm/atomic: Rename crtc_state->pageflip_flags to async_flip drm/atomic: Reject FLIP_ASYNC unconditionally drm/atomic: Take the atomic toys away from X drm/amdgpu: flag navi12 and 14 as experimental for 5.4 drm/kms: Duct-tape for mode object lifetime checks drm/amdgpu: add navi12 pci id drm/amdgpu: add navi14 PCI ID for work station SKU drm/amdkfd: Swap trap temporary registers in gfx10 trap handler drm/amd/powerplay: implement sysfs for getting dpm clock drm/amd/display: Restore backlight brightness after system resume drm/amd/display: Implement voltage limitation for dali ...
2019-09-27nfp: flower: fix memory leak in nfp_flower_spawn_vnic_reprsNavid Emamdoost1-0/+3
In nfp_flower_spawn_vnic_reprs in the loop if initialization or the allocations fail memory is leaked. Appropriate releases are added. Fixes: b94524529741 ("nfp: flower: add per repr private data for LAG offload") Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-27nfp: flower: prevent memory leak in nfp_flower_spawn_phy_reprsNavid Emamdoost1-0/+4
In nfp_flower_spawn_phy_reprs, in the for loop over eth_tbl if any of intermediate allocations or initializations fail memory is leaked. requiered releases are added. Fixes: b94524529741 ("nfp: flower: add per repr private data for LAG offload") Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-27vrf: Do not attempt to create IPv6 mcast rule if IPv6 is disabledDavid Ahern1-1/+2
A user reported that vrf create fails when IPv6 is disabled at boot using 'ipv6.disable=1': https://bugzilla.kernel.org/show_bug.cgi?id=204903 The failure is adding fib rules at create time. Add RTNL_FAMILY_IP6MR to the check in vrf_fib_rule if ipv6_mod_enabled is disabled. Fixes: e4a38c0c4b27 ("ipv6: add vrf table handling code for ipv6 mcast") Signed-off-by: David Ahern <dsahern@gmail.com> Cc: Patrick Ruddy <pruddy@vyatta.att-mail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-27Merge tag 'ntb-5.4' of git://github.com/jonmason/ntbLinus Torvalds6-12/+30
Pull NTB updates from Jon Mason: "A few bugfixes and support for new AMD NTB hardware" * tag 'ntb-5.4' of git://github.com/jonmason/ntb: NTB: fix IDT Kconfig typos/spellos ntb_hw_amd: Add memory window support for new AMD hardware ntb_hw_amd: Add a new NTB PCI device ID NTB: ntb_transport: remove redundant assignment to rc ntb_hw_switchtec: make ntb_mw_set_trans() work when addr == 0 ntb: point to right memory window index
2019-09-27net: dsa: qca8k: Fix port enable for CPU portAndrew Lunn1-0/+3
The CPU port does not have a PHY connected to it. So calling phy_support_asym_pause() results in an Opps. As with other DSA drivers, add a guard that the port is a user port. Reported-by: Michal Vokáč <michal.vokac@ysoft.com> Fixes: 0394a63acfe2 ("net: dsa: enable and disable all ports") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Michal Vokáč <michal.vokac@ysoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-27net: ethernet: stmmac: Fix signedness bug in ipq806x_gmac_of_parse()Dan Carpenter1-1/+1
The "gmac->phy_mode" variable is an enum and in this context GCC will treat it as an unsigned int so the error handling will never be triggered. Fixes: b1c17215d718 ("stmmac: add ipq806x glue layer") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-27net: nixge: Fix a signedness bug in nixge_probe()Dan Carpenter1-1/+1
The "priv->phy_mode" is an enum and in this context GCC will treat it as an unsigned int so it can never be less than zero. Fixes: 492caffa8a1a ("net: ethernet: nixge: Add support for National Instruments XGE netdev") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-27of: mdio: Fix a signedness bug in of_phy_get_and_connect()Dan Carpenter1-1/+1
The "iface" variable is an enum and in this context GCC treats it as an unsigned int so the error handling is never triggered. Fixes: b78624125304 ("of_mdio: Abstract a general interface for phy connect") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-07 21:20:10 +0300