summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2016-08-13net: thunderx: Add RGMII interface type supportSunil Goutham6-33/+332
This patch adds RGX/RGMII interface type support to BGX driver. This type of interface is supported by 81xx SOC. CN81XX VNIC has 8 VFs and max possible LMAC interfaces are 9, hence RGMII interface will not work if all DLMs are in BGX mode and all 8 LMACs are enabled Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13net: thunderx: Add QSGMII interface type supportSunil Goutham2-12/+54
This patch adds support for QSGMII interface type to the BGX driver. This type of interface is supported by 81xx SOC. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13net: thunderx: Add 81xx support to BGX driverSunil Goutham2-10/+113
This patch adds support for BGX module on 81xx where a BGX can be split and have different LMACs configured in different modes. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13net: thunderx: Support for different LMAC types within BGXSunil Goutham2-136/+98
On 88xx all LMACs in a BGX will be in same mode but on 81xx BGX can be split as two and there can be LMACs configured in different modes. These changes move lmac_type, lane2serdes fields into per lmac struct from BGX struct. Got rid of qlm_mode field which has become redundant with these changes. And now no of valid LMACs is read from CSRs configured by low level firmware and figuring out the same based on QLM mode is discarded Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13net: thunderx: Enable mailbox interrupts on 81xx/83xxSunil Goutham1-38/+50
88xx has 128 VFs, 81xx has 8 VFs and 83xx will have 32VFs. Made changes to PF driver such that mailbox interrupt enable registers are configuired based on number of VFs HW supports. Also cleanedup mailbox irq handler registration code. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13net: thunderx: Enable CQE_RX desc's extension fieldsSunil Goutham4-2/+27
Unlike 88xx, CQE_RX descriptor's tunnelling extension i.e CQE_RX2_S is always enabled on 81xx/83xx and HW does insert these fields into CQE_RX. As a result receive buffer addresses will now be present at 7th word of CQE_RX instead of 6th. Enable CQE_RX2_S on 88xx pass 2.x as well. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13net: thunderx: Set queue count based on number of CPUsSunil Goutham4-12/+14
81xx has only 4 CPUs, so it doesn't make sense to initialize entire Qset i.e 8 queues by default. Made changes to queue initialization to init queues equal to number of CPUs or 8 queues whichever is lesser. Also this will be applicable to VMs with VNIC VF attached and having less VCPUs Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13net: thunderx: Add support for 81xx and 83xx chipsSunil Goutham3-17/+73
This patch adds info on HW maximums of 81xx/83xx and also configures receive and transmit datapaths accordingly. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13net: thunderx: Add VNIC's PCI devid on future chipsSunil Goutham2-3/+21
This patch adds PCI device IDs of VNIC on newer chips and also registers VF driver with them. Device id remains same for all versions of chips but subsystem device id changes. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13net: thunderx: Moved HW capability info from macros to structureSunil Goutham2-52/+85
Current driver has most of the HW maximums info like no of channels, traffic limiters, RSS indices e.t.c in the form of macros. These have been moved into a 'hw_info' structure so that support for VNIC on newer chips with different set of HW maximums can be added. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13drivers: net: xgene: Fix backward compatibilityIyappan Subramanian1-9/+9
This patch fixes the backward compatibility on handling phy_connect(), by iterating over the phy-handle, when new DT is used with older kernel. Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13drivers: net: xgene: Poll link status via GPIOIyappan Subramanian4-0/+23
When 10GbE SFP+ module is not plugged in or cable is not connected, the link status register does not report the proper state due to floating signal. This patch checks the module present status via an GPIO to determine whether to ignore the link status register and report link down. Signed-off-by: Quan Nguyen <qnguyen@apm.com> Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Tested-by: Fushen Chen <fchen@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13drivers: net: xgene: XFI PCS reset when link is downIyappan Subramanian5-0/+54
This patch fixes the link recovery issue, by doing PCS reset when the link is down. Signed-off-by: Fushen Chen <fchen@apm.com> Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13drivers: net: xgene: Change port init sequenceIyappan Subramanian1-3/+2
This patch rearranges the port initialization sequence as recommended by hardware specification. This patch also removes, mac_init() call from xgene_enet_link_state(), as it was not required. Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Tested-by: Fushen Chen <fchen@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13drivers: net: xgene: Fix RSS indirection table fieldsIyappan Subramanian2-8/+19
This patch fixes FPSel and NxtFPSel fields length to 5-bit value. Signed-off-by: Quan Nguyen <qnguyen@apm.com> Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Tested-by: Fushen Chen <fchen@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13drivers: net: xgene: Fix error deconstruction pathIyappan Subramanian1-8/+19
Since register_netdev() call in xgene_enet_probe() was moved down to the end, it doesn't properly handle errors that may occur, by deconstructing everything that was setup before the error occurred. Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13drivers: net: xgene: fix: Delete descriptor rings and buffer poolsIyappan Subramanian1-5/+7
xgene_enet_init_hw() should delete any descriptor rings and buffer pools setup should le_ops->cle_init() return an error. Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13drivers: net: xgene: fix: Add dma_unmap_singleIyappan Subramanian1-2/+12
In addition to xgene_enet_delete_bufpool() freeing skbs, their associated dma memory should also be unmapped. Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13drivers: net: xgene: Fix compiler warningsIyappan Subramanian1-4/+0
Fixed compiler warnings reported with -Wmaybe-uninitialized W=1, /drivers/net/ethernet/apm/xgene/xgene_enet_main.c: In function ‘xgene_enet_rx_frame’: ../drivers/net/ethernet/apm/xgene/xgene_enet_main.c:455:27: warning: variable ‘pdata’ set but not used [-Wunused-but-set-variable] struct xgene_enet_pdata *pdata; ^ ../drivers/net/ethernet/apm/xgene/xgene_enet_main.c: In function ‘xgene_enet_remove’: ../drivers/net/ethernet/apm/xgene/xgene_enet_main.c:1691:30: warning: variable ‘mac_ops’ set but not used [-Wunused-but-set-variable] const struct xgene_mac_ops *mac_ops; ^ Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13sfc: get timer configuration from adapterBert Kenward5-33/+125
On SFN8000 series adapters the MC provides a method to get the timer quantum and the maximum timer setting. We revert to the old values if the new call is unavailable. Signed-off-by: Bert Kenward <bkenward@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13sfc: set interrupt moderation via MCDIBert Kenward9-62/+103
SFN8000-series NICs require a new method of setting interrupt moderation, via MCDI. This is indicated by a workaround flag. This new MCDI command takes an explicit time value rather than a number of ticks. It therefore makes sense to also store the moderation values in terms of time, since that is what the ethtool interface is interested in. Signed-off-by: Bert Kenward <bkenward@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13sfc: use new performance based event queue initBert Kenward1-12/+31
Rather than explicitly specifying flags we can now specify a desired performance target to the firmware, ie higher throughput or lower latency. For now we use the default "auto" configuration. Signed-off-by: Bert Kenward <bkenward@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13sfc: retrieve second word of datapath capabilitiesBert Kenward2-2/+11
Signed-off-by: Bert Kenward <bkenward@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13sfc: allow asynchronous MCDI without completion functionBert Kenward1-1/+4
Signed-off-by: Bert Kenward <bkenward@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13sfc: update MCDI protocol headersBert Kenward1-15/+515
Signed-off-by: Bert Kenward <bkenward@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13net: ethernet: mediatek: enhance the locking using the lightweight onesSean Wang1-11/+8
Since these critical sections protected by page_lock are all entered from the user context or bottom half context, they can be replaced with the spin_lock() or spin_lock_bh instead of spin_lock_irqsave(). Signed-off-by: Sean Wang <sean.wang@mediatek.com> Acked-by: John Crispin <john@phrozen.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)Netanel Belgazal17-0/+10542
This is a driver for the ENA family of networking devices. Signed-off-by: Netanel Belgazal <netanel@annapurnalabs.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13net: phy: Add gmiitorgmii converter supportAppana Durga Kedareswara Rao3-0/+117
This patch adds support for gmiitorgmii converter. The GMII to RGMII IP core provides the Reduced Gigabit Media Independent Interface (RGMII) between Ethernet physical media Devices and the Gigabit Ethernet controller. This core can Switch dynamically between the three different speed modes of Operation by configuring the converter register through mdio write. MDIO interface is used to set operating speed of Ethernet MAC. This converter sits between the MAC and the external phy MAC <==> GMII2RGMII <==> RGMII_PHY Signed-off-by: Kedareswara rao Appana <appanad@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-11net: ethernet: renesas: sh_eth: use new api ethtool_{get|set}_link_ksettingsPhilippe Reynes1-9/+9
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Tested-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-11net: ethernet: renesas: sh_eth: use phydev from struct net_devicePhilippe Reynes2-18/+12
The private structure contain a pointer to phydev, but the structure net_device already contain such pointer. So we can remove the pointer phy_dev in the private structure, and update the driver to use the one contained in struct net_device. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Tested-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-11net: macb: Add 64 bit addressing support for GEMHarini Katakam2-11/+61
This patch adds support for 64 bit addressing and BDs. -> Enable 64 bit addressing in DMACFG register. -> Set DMA mask when design config register shows support for 64 bit addr. -> Add new BD words for higher address when 64 bit DMA support is present. -> Add and update TBQPH and RBQPH for MSB of BD pointers. -> Change extraction and updation of buffer addresses to use 64 bit address. -> In gem_rx extract address in one place insted of two and use a separate flag for RXUSED. Signed-off-by: Harini Katakam <harinik@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-11qed*: Add support for ethtool link_ksettings callbacks.Sudarsana Reddy Kalluru4-84/+165
This patch adds the driver implementation for ethtool link_ksettings callbacks. qed driver now defines/uses the qed specific masks for representing link capability values. qede driver maps these values to to new link modes defined by the kernel implementation of link_ksettings. Please consider applying this to 'net-next' branch. Signed-off-by: Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-11net: ethernet: ti: cpsw: move ale, cpts and drivers params under cpsw_commonIvan Khoronzhuk1-129/+106
The ale, cpts, version, rx_packet_max, bus_freq, interrupt pacing parameters are common per net device that uses the same h/w. So, move them to common driver structure. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Reviewed-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-11net: ethernet: ti: cpsw: move napi struct to cpsw_commonIvan Khoronzhuk1-30/+22
The napi structs are common for both net devices in dual_emac mode, In order to not hold duplicate links to them, move to cpsw_common. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Reviewed-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-11net: ethernet: ti: cpsw: move platform data and slaves info to cpsw_commonIvan Khoronzhuk1-128/+137
These data are common for net devs in dual_emac mode. No need to hold it for every priv instance, so move them under cpsw_common. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Reviewed-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-11net; ethernet: ti: cpsw: move irq stuff under cpsw_commonIvan Khoronzhuk1-36/+29
The irq data are common for net devs in dual_emac mode. So no need to hold these data in every priv struct, move them under cpsw_common. Also delete irq_num var, as after optimization it's not needed. Correct number of irqs to 2, as anyway, driver is using only 2, at least for now. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Reviewed-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-11net: ethernet: ti: cpsw: move cpdma resources to cpsw_commonIvan Khoronzhuk1-49/+48
Every net device private struct holds links to shared cpdma resources. No need to save and every time synchronize these resources per net dev. So, move it to common driver struct. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Reviewed-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-11net: ethernet: ti: cpsw: move links on h/w registers to cpsw_commonIvan Khoronzhuk1-44/+53
The pointers on h/w registers are common for every cpsw_private instance, so no need to hold them for every ndev. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Reviewed-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-11net: ethernet: ti: cpsw: replace pdev on devIvan Khoronzhuk1-31/+34
No need to hold pdev link when only dev is needed. This allows to simplify a bunch of cpsw->pdev->dev now and farther. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Reviewed-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-11net: ethernet: ti: cpsw: create common struct to hold shared driver dataIvan Khoronzhuk1-23/+39
This patch simply create holder for common data and as a start moves pdev var to it. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Reviewed-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-11net: ethernet: ti: cpsw: don't check slave num in runtimeIvan Khoronzhuk1-7/+4
No need to check const slave num in runtime for every packet, and ndev for slaves w/o ndev is anyway NULL. So remove redundant check and macro. Reviewed-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-11net: ethernet: ti: cpsw: remove clk var from privIvan Khoronzhuk1-6/+4
There is no need to hold link to clk, it's used only once while probe. Reviewed-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-11net: ethernet: ti: cpsw: remove priv from cpsw_get_slave_port() parameters listIvan Khoronzhuk1-5/+5
There is no need in priv here. Reviewed-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-11net: ethernet: ti: cpsw: remove intr dbg msg from poll handlersIvan Khoronzhuk1-6/+0
At poll handler no possibility to figure out which network device is handling packets, as cpdma channels are common for both network devices in dual_emac mode. Currently, the messages are printed only for one device, in fact, there is two. This print msg is incorrect and seems is not very useful, so drop it from poll handler. Reviewed-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-11net: ethernet: ti: cpsw: simplify submit routineIvan Khoronzhuk1-13/+5
As second net dev is created only in case of dual_emac mode, port number can be figured out in simpler way. Also no need to pass redundant ndev struct. Reviewed-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-11rps: Inspect PPTP encapsulated by GRE to get flow hashGao Feng1-35/+1
The PPTP is encapsulated by GRE header with that GRE_VERSION bits must contain one. But current GRE RPS needs the GRE_VERSION must be zero. So RPS does not work for PPTP traffic. In my test environment, there are four MIPS cores, and all traffic are passed through by PPTP. As a result, only one core is 100% busy while other three cores are very idle. After this patch, the usage of four cores are balanced well. Signed-off-by: Gao Feng <fgao@ikuai8.com> Reviewed-by: Philip Prindeville <philipp@redfish-solutions.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-11net: resolve symbol conflicts with generic hashtable.hJiri Kosina1-7/+7
This is a preparatory patch for converting qdisc linked list into a hashtable. As we'll need to include hashtable.h in netdevice.h, we first have to make sure that this will not introduce symbol conflicts for any of the netdevice.h users. Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-11ravb: use proper names for suspend/resume functionsNiklas Söderlund1-3/+3
The patch 'ravb: add sleep PM suspend/resume support' used incorrect function names containing 'runtime' for the suspend and resume functions. Reported-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-10ravb: add sleep PM suspend/resume supportNiklas Söderlund1-8/+64
The interface would not function after the system had been woken up after have been suspended (echo mem > /sys/power/state) cycle. The reason for this is that all device registers have been reset to its default values. This patch adds sleep suspend and resume functions that detached the interface at suspend and restore the registers and reattach the interface at resume. Only the registers that are only configured at probe time needs to be explicitly restored by the resume handler. All other registers are reconfigured by either reopening the device in the resume handler (if the device was running when the system was suspended) or when the interface is opened by a user at a later time. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-10net: dsa: b53: constify b53_io_ops structuresJulia Lawall6-6/+8
The b53_io_ops structures are never modified, so declare them as const. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-02-05 07:48:00 +0300