| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Remove extra line.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add runtime PM support.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Use __maybe_unused and pm_ptr() for pm ops.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Move set of TRNG_HALFR in atmel_trng_init() as this function is
also called on resume path. In case of SAMA7G5 where backup and
self-refresh PM mode is available most of the SoC parts are
powered of (including TRNG) when entering suspend. In that case
on resuming path TRNG_HALFR should also be re-configured.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
s/atmel_trng_disable/atmel_trng_cleanup/g and
s/atmel_trng_enable/atmel_trng_init/g to cope with
struct hwrng::{init, cleanup} members.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Call atmel_trng_disable() on failure path of probe.
Fixes: a1fa98d8116f ("hwrng: atmel - disable TRNG during suspend")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add wait for ready support on read.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Due to the subreq pointer misuse the private context memory. The aead
soft crypto occasionally casues the OS panic as setting the 64K page.
Here is fix it.
Fixes: 6c46a3297bea ("crypto: hisilicon/sec - add fallback tfm...")
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Refuse to try mapping zero bytes as this may cause a fault
on some configurations / platforms and it seems the prev.
attempt is not enough and we need to be more explicit.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Reported-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Fixes: ce0fc6db38de ("crypto: ccree - protect against empty or NULL
scatterlists")
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Since there are two workqueues implemented in CPTPF driver - one
for handling mailbox requests from VFs and another for handling FLR.
In both cases PF driver will forward the request to AF driver by
writing to mailbox memory. A race condition may arise if two
simultaneous requests are written to mailbox memory. Introducing
locking mechanism to maintain synchronization between multiple
mailbox accesses.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The rng_quality sysfs attribute returns the quality setting for the
currently active hw_random device, in entropy bits per 1024 bits of
input. Storing a value between 0 and 1024 to this file updates this
estimate accordingly.
Based on the updates to the quality setting, the rngd kernel thread
may be stopped (if no hw_random device is trusted to return entropy),
may be started (if the quality setting is increased from zero), or
may use a different hw_random source (if that has higher quality
output).
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The current_quality variable exposed as a module parameter is
fundamentally broken: If it is set at boot time, it is overwritten once
the first hw rng device is loaded; if it is set at runtime, it is
without effect if the hw rng device had its quality value set to 0 (and
no default_quality was set); and if a new rng is selected, it gets
overwritten. Therefore, mark it as obsolete, and replace it by the
per-rng quality setting.
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Extract the start/stop logic for the in-kernel rngd thread to
a separate function.
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
There is no real reason why this list needs to be kept ordered by
the driver-provided quality value -- a value which is set only by
a handful of hw_random devices anyway.
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
When loading rockchip crypto module, testmgr complains that ivsize of ecb-des3-ede-rk
is not the same than generic implementation.
In fact ECB does not use an IV.
Fixes: ce0183cb6464b ("crypto: rockchip - switch to skcipher API")
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
It is not need to enable sm4 extra mode in at HW V3. Here is fix it.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Added the register configuration of the SVA mode for HW V3.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Platform_driver probe functions aren't called with locks held
and thus don't need GFP_ATOMIC. Use GFP_KERNEL instead.
Problem found with Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The only usage of these is to pass their address to
sysfs_{create,remove}_group(), which takes pointers to const struct
attribute_group. Make them const to allow the compiler to put them in
read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The only usage of omap_sham_attr_group is to pass its address to
sysfs_{create,remove}_group(), which takes pointers to const struct
attribute_group. Make it const to allow the compiler to put it in
read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The only usage of omap_aes_attr_group is to pass its address to
sysfs_{create,remove}_group(), which takes pointers to const struct
attribute_group. Make it const to allow the compiler to put it in
read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add support for HW QAT Power Management (PM) feature.
This feature is enabled at init time (1) by sending an admin message to
the firmware, targeting the admin AE, that sets the idle time before
the device changes state and (2) by unmasking the PM source of interrupt
in ERRMSK2.
The interrupt handler is extended to handle a PM interrupt which
is triggered by HW when a PM transition occurs. In this case, the
driver responds acknowledging the transaction using the HOST_MSG
mailbox.
Signed-off-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Co-developed-by: Marcinx Malinowski <marcinx.malinowski@intel.com>
Signed-off-by: Marcinx Malinowski <marcinx.malinowski@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Marco Chiappero <marco.chiappero@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Move error source related CSRs from 4xxx to the wider GEN4 header file.
Signed-off-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Marco Chiappero <marco.chiappero@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
In an effort to reduce the amount of workqueues, scattered across
the QAT driver, introduce the misc workqueue. This queue will be used
to handle bottom halves, Power Management and more in the future.
The function adf_misc_wq_queue_work() has been added to simplify
the enqueuing of jobs.
Signed-off-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Marco Chiappero <marco.chiappero@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
While in this particular case it would not be a (critical) issue,
the pattern itself is bad and error prone in case the location
of the parameter is changed.
Don't cast parameter to unsigned long pointer in the bit operations.
Instead copy to a local variable on stack of a proper type and use.
Fixes: b4b7e67c917f ("crypto: qat - Intel(R) QAT ucode part of fw loader")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
crypto had a typo, fix it.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add support for the TDES IP found on sama7g5.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Pointers in_sg and out_sg are being initialized with values that are
never read, they are being re-assigned the same values later on. The
initializations are redundant, remove them in preference to the later
assignments that are closer to when the pointers are being used.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Variable c_size is being initialized with a value that is never read, it
is being re-assigned with a different value later on. The initialization
is redundant and can be removed.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
No issues were found while using the driver with dm-crypt enabled. So
CONFIG_DM_CRYPT check in the driver can be removed.
This also fixes the NULL pointer dereference in driver release if
CONFIG_DM_CRYPT is enabled.
...
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008
...
Call trace:
crypto_unregister_alg+0x68/0xfc
crypto_unregister_skciphers+0x44/0x60
otx2_cpt_crypto_exit+0x100/0x1a0
otx2_cptvf_remove+0xf8/0x200
pci_device_remove+0x3c/0xd4
__device_release_driver+0x188/0x234
device_release_driver+0x2c/0x4c
...
Fixes: 6f03f0e8b6c8 ("crypto: octeontx2 - register with linux crypto framework")
Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch adds support for hardware version of AES and SHA IPs
available on lan966x SoC.
Signed-off-by: Kavyasree Kotagiri <kavyasree.kotagiri@microchip.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Tested-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
In case the entropy quality is low, there may be less than one bit to
credit in the call to add_hwgenerator_randomness(): The number of bytes
returned by rng_get_data() multiplied by the current quality (in entropy
bits per 1024 bits of input) must be larger than 128 to credit at least
one bit. However, imx-rngc.c sets the quality to 19, but may return less
than 32 bytes; hid_u2fzero.c sets the quality to 1; and users may override
the quality setting manually.
In case there is less than one bit to credit, keep track of it and add
that credit to the next iteration.
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
LDWB is getting incorrectly used in HW when
CPT_AF_LF()_PTR_CTL[IQB_LDWB]=1 and CPT instruction queue has less than
320 free entries. So, increase HW instruction queue size by 320 and give
320 entries less for SW/NIX RX as a SW workaround.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
When CPT_AF_DIAG[FLT_DIS] = 0 and a CPT engine access to
LLC/DRAM encounters a fault/poison, a rare case may result
in unpredictable data being delivered to a CPT engine.
So, this patch adds code to set FLT_DIS as a workaround.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
When software sets CPT_AF_CTL[RNM_REQ_EN]=1 and RNM in not producing
entropy(i.e., RNM_ENTROPY_STATUS[NORMAL_CNT] < 0x40), the first cycle of
the response may be lost due to a conditional clocking issue. Due to
this, the subsequent random number stream will be corrupted. So, this
patch adds support to ensure RNM_ENTROPY_STATUS[NORMAL_CNT] = 0x40
before writing CPT_AF_CTL[RNM_REQ_EN] = 1, as a workaround.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
For two reasons, current_quality may become zero within the rngd
kernel thread: (1) The user lowers current_quality to 0 by writing
to the sysfs module parameter file (note that increasing the quality
from zero is without effect at the moment), or (2) there are two or
more hwrng devices registered, and those which provide quality>0 are
unregistered, but one with quality==0 remains.
If current_quality is 0, the randomness is not trusted and cannot help
to increase the entropy count. That will lead to continuous calls to
the hwrngd thread and continuous stirring of the input pool with
untrusted bits.
Cc: Matt Mackall <mpm@selenic.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
In case the user-specified rng device is not working, it is not used;
therefore cur_rng_set_by_user must not be set to 1.
Cc: Matt Mackall <mpm@selenic.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Using rng_buffer in add_early_randomness() may race with rng_dev_read().
Use rng_fillbuf instead, as it is otherwise only used within the kernel
by hwrng_fillfn() and therefore never exposed to userspace.
Cc: Matt Mackall <mpm@selenic.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
According to <linux/hw_random.h>, the @max parameter of the ->read
callback "is a multiple of 4 and >= 32 bytes". That promise was not
kept by add_early_randomness(), which only asked for 16 bytes. As
rng_buffer_size() is at least 32, we can simply ask for 32 bytes.
Cc: Matt Mackall <mpm@selenic.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
hw-random device drivers depend on the hw-random core being
initialized. Make this ordering explicit, also for the case
these drivers are built-in. As the core itself depends on
misc_register() which is set up at subsys_initcall time,
advance the initialization of the core (only) to the
fs_initcall() level.
Cc: Matt Mackall <mpm@selenic.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch fixes a bug in scatterlist processing that may cause incorrect AES block encryption/decryption.
Fixes: 2e6d793e1bf0 ("crypto: mxs-dcp - Use sg_mapping_iter to copy data")
Signed-off-by: Tomas Paukrt <tomaspaukrt@email.cz>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The kernel test rebot report this warning: Uninitialized variable: ret.
The code flow may return value of ret directly. This value is an
uninitialized variable, here is fix it.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Use the correct print format. Printing an unsigned int value should
use %u instead of %d.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The CTR counter is 32bit rollover default on the BD.
But the NIST standard is 128bit rollover. it cause the
testing failed, so need to fix the BD configuration.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Fix the maximum length of AAD for the CCM mode due to the hardware limited.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Modify the print of information that might lead to user misunderstanding.
Currently only XTS mode need the fallback tfm when using 192bit key.
Others algs not need soft fallback tfm. So others algs can return
directly.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Fixup icv(integrity check value) checking enabled wrong on
Kunpeng 930
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
OcteonTX2 CPT driver will fail to link without devlink support.
aarch64-linux-gnu-ld: otx2_cpt_devlink.o: in function `otx2_cpt_dl_egrp_delete':
otx2_cpt_devlink.c:18: undefined reference to `devlink_priv'
aarch64-linux-gnu-ld: otx2_cpt_devlink.o: in function `otx2_cpt_dl_egrp_create':
otx2_cpt_devlink.c:9: undefined reference to `devlink_priv'
aarch64-linux-gnu-ld: otx2_cpt_devlink.o: in function `otx2_cpt_dl_uc_info':
otx2_cpt_devlink.c:27: undefined reference to `devlink_priv'
Fixes: fed8f4d5f946 ("crypto: octeontx2 - parameters for custom engine groups")
Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The logic that detects, enables and disables pfvf interrupts was
expecting a single CSR per VF. Instead, the source and mask register are
two registers with a bit per VF.
Due to this, the driver is reading and setting reserved CSRs and not
masking the correct source of interrupts.
Fix the access to the source and mask register for QAT GEN4 devices by
removing the outer loop in adf_gen4_get_vf2pf_sources(),
adf_gen4_enable_vf2pf_interrupts() and
adf_gen4_disable_vf2pf_interrupts() and changing the helper macros
ADF_4XXX_VM2PF_SOU and ADF_4XXX_VM2PF_MSK.
Fixes: a9dc0d966605 ("crypto: qat - add PFVF support to the GEN4 host driver")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Co-developed-by: Siming Wan <siming.wan@intel.com>
Signed-off-by: Siming Wan <siming.wan@intel.com>
Reviewed-by: Xin Zeng <xin.zeng@intel.com>
Reviewed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Reviewed-by: Marco Chiappero <marco.chiappero@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
When adding hashes support to sun8i-ss, I have added them only on A83T.
But I forgot that 0 is a valid algorithm ID, so hashes are enabled on A80 but
with an incorrect ID.
Anyway, even with correct IDs, hashes do not work on A80 and I cannot
find why.
So let's disable all of them on A80.
Fixes: d9b45418a917 ("crypto: sun8i-ss - support hash algorithms")
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
