| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
We currently have two module parameters that control GuC:
"enable_guc_loading" and "enable_guc_submission". Whenever
we need submission=1, we also need loading=1. We also need
loading=1 when we want to want to load and verify the HuC.
Lets combine above module parameters into one "enable_guc"
modparam. New supported bit values are:
0=disable GuC (no GuC submission, no HuC)
1=enable GuC submission
2=enable HuC load
Special value "-1" can be used to let driver decide what
option should be enabled for given platform based on
hardware/firmware availability or preference.
Explicit enabling any of the GuC features makes GuC load
a required step, fallback to non-GuC mode will not be
supported.
v2: Don't use -EIO
v3: define modparam bits (Chris)
v4: rely on implicit cast (Chris)
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171206135316.32556-6-michal.wajdeczko@intel.com
|
|
-EIO has special meaning and is used when we want to allow
engine initialization to fail and mark GPU as wedged.
However here at this function we should return error code
that corresponds to upload status only, as any decision how
to handle missing firmware should be done higher level function
(silent fallback to non-GuC mode, fail into wedged mode, or
abort driver load with fatal error).
v2: commit message update (Michal)
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171206135316.32556-5-michal.wajdeczko@intel.com
|
|
If we don't plan to use GuC then we should not try to fetch GuC and
HuC firmwares. We can save memory and avoid possible dmesg noise.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171206135316.32556-4-michal.wajdeczko@intel.com
|
|
In the upcoming patch we will change the way how to recognize
when GuC is in use. Using helper macros will minimize scope
of that changes. While here, update dev_info message.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171206135316.32556-3-michal.wajdeczko@intel.com
|
|
Doing GuC firmware path selection from sanitize_options function
is not perfect, while there is no problem with doing so during
early init stage as we already have all needed data.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171206135316.32556-2-michal.wajdeczko@intel.com
|
|
Doing HuC firmware path selection from sanitize_options function
is not perfect, while there is no problem with doing so during
early init stage as we already have all needed data.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171206135316.32556-1-michal.wajdeczko@intel.com
|
|
drm-intel-next-queued
gvt-next-2017-12-05
- VFIO mdev display dmabuf interface and gvt support (Tina)
- VFIO mdev opregion support/fixes (Tina/Xiong/Chris)
- workload scheduling optimization (Changbin)
- preemption fix and temporal workaround (Zhenyu)
- and misc fixes after refactor (Chris)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171205032629.vylemph57toipeax@zhen-hp.sh.intel.com
|
|
v2: add more missing platform tags
v3: change tag to cnp rather than using gen9,gen10
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171205190118.7088-2-lucas.demarchi@intel.com
|
|
v2: Allow to have or omit space before platform
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171205190118.7088-1-lucas.demarchi@intel.com
|
|
History tells us that if we cannot reset the GPU now, we never will. This
then impacts everything that is run subsequently. On failing the reset,
we mark the driver as wedged, trying to prevent further execution on the
GPU, forcing userspace to fallback to using the CPU to update its
framebuffers and let the user know what happened.
We also want to go one step further and add a taint to the kernel so that
any subsequent faults can be traced back to this failure. This is
useful for CI, where if the GPU/driver fails we want to reboot and
restart testing rather than continue on into oblivion. For everyone
else, the warning taint is a testament to the system unreliability.
TAINT_WARN is used anytime a WARN() is emitted, which is suitable for
our purposes here as well; the driver/system may behave unexpectedly
after the failure.
v2: Also taint if the recovery fails (again history shows us that is
typically fatal).
v3: Use TAINT_WARN
References: https://bugs.freedesktop.org/show_bug.cgi?id=103514
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: Tomi Sarvela <tomi.p.sarvela@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171205172757.32609-1-chris@chris-wilson.co.uk
|
|
From the shrinker paths, we want to relinquish the GPU and GGTT access to
the object, releasing the backing storage back to the system for
swapout. As a part of that process we would unpin the pages, marking
them for access by the CPU (for the swapout/swapin). However, if that
process was interrupted after unbind the vma, we missed a flush of the
inflight GGTT writes before we made that GTT space available again for
reuse, with the prospect that we would redirect them to another page.
The bug dates back to the introduction of multiple GGTT vma, but the
code itself dates to commit 02bef8f98d26 ("drm/i915: Unbind closed vma
for i915_gem_object_unbind()").
Fixes: 02bef8f98d26 ("drm/i915: Unbind closed vma for i915_gem_object_unbind()")
Fixes: c5ad54cf7dd8 ("drm/i915: Use partial view in mmap fault handler")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171204132513.7303-1-chris@chris-wilson.co.uk
|
|
There is a new version of dmc available for skylake.
Following additions from ver1.27
1. Fix for the issue where DC_STATE was getting enabled even when
disabled by driver causing data corruption.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1510276712-29590-2-git-send-email-anusha.srivatsa@intel.com
|
|
We apply this logic to Gen9 as well. We didn't notice this issue as
most part we've encountered so far only use the crystal as source for
their timestamp registers.
Fixes: dab9178333 ("drm/i915: expose command stream timestamp frequency to userspace")
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171113233455.12085-5-lionel.g.landwerlin@intel.com
|
|
This is to workaround guest driver hang regression after
preemption enable that gvt hasn't enabled handling of that
for guest workload. So in effect this disables preemption
for gvt context now.
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
We shouldn't mark inactive for vGPU context if preempted,
which would still be re-scheduled later. So keep active state.
Fixes: d6c0511300dc ("drm/i915/execlists: Distinguish the incomplete context notifies")
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
The current schedule policy rely on a 1ms timer to execute workload. This
can introduce maximum 1ms unnecessary latency. This is especially bad for
small media workloads.
And I don't think we need this timer for QoS, but the change is not simply
remove the code. So I made a new API intel_gvt_kick_schedule() for future
change.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
Convert the macro to a function which should always be preferred.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
The per vGPU dmabuf_obj list should be released in intel_vgpu_dmabuf_
cleanup, which is invoked either in the process of closing a VM or in
the process of removing a vGPU.
Fixes: e3a0d7976c53 ("drm/i915/gvt: Handle orphan dmabuf_objs")
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
This patch introduces KBL platform to dma-buf on Gvt-g.
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
dmabuf_obj's destruction relys on GEM release operation, which is managed
in i915 driver. And there is a time window between vgpu's destruction and
its dmabuf_objs' destruction. This patch is to free the orphan dmabuf_objs
correctly after the vgpu passes away.
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
This patch introduces a guest's framebuffer sharing mechanism based on
dma-buf subsystem. With this sharing mechanism, guest's framebuffer can
be shared between guest VM and host.
v17:
- modify VFIO_DEVICE_GET_GFX_DMABUF interface. (Alex)
v16:
- add x_hot and y_hot. (Gerd)
- add flag validation for VFIO_DEVICE_GET_GFX_DMABUF. (Alex)
- rebase 4.14.0-rc6.
v15:
- add VFIO_DEVICE_GET_GFX_DMABUF ABI. (Gerd)
- add intel_vgpu_dmabuf_cleanup() to clean up the vGPU's dmabuf. (Gerd)
v14:
- add PROBE, DMABUF and REGION flags. (Alex)
v12:
- refine the lifecycle of dmabuf.
v9:
- remove dma-buf management. (Alex)
- track the dma-buf create and release in kernel mode. (Gerd) (Daniel)
v8:
- refine the dma-buf ioctl definition.(Alex)
- add a lock to protect the dmabuf list. (Alex)
v7:
- release dma-buf related allocations in dma-buf's associated release
function. (Alex)
- refine ioctl interface for querying plane info or create dma-buf.
(Alex)
v6:
- align the dma-buf life cycle with the vfio device. (Alex)
- add the dma-buf related operations in a separate patch. (Gerd)
- i915 related changes. (Chris)
v5:
- fix bug while checking whether the gem obj is gvt's dma-buf when user
change caching mode or domains. Add a helper function to do it.
(Xiaoguang)
- add definition for the query plane and create dma-buf. (Xiaoguang)
v4:
- fix bug while checking whether the gem obj is gvt's dma-buf when set
caching mode or doamins. (Xiaoguang)
v3:
- declare a new flag I915_GEM_OBJECT_IS_GVT_DMABUF in drm_i915_gem_object
to represent the gem obj for gvt's dma-buf. The tiling mode, caching
mode and domains can not be changed for this kind of gem object. (Alex)
- change dma-buf related information to be more generic. So other vendor
can use the same interface. (Alex)
v2:
- create a management fd for dma-buf operations. (Alex)
- alloc gem object's backing storage in gem obj's get_pages() callback.
(Chris)
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
This patch is to introduce the framebuffer decoder which can decode guest
OS's framebuffer information, including primary, cursor and sprite plane.
v16:
- rebase to 4.14.0-rc6.
v14:
- refine pixel format table. (Zhenyu)
v9:
- move drm format change to a separate patch. (Xiaoguang)
v8:
- fix a bug in decoding primary plane. (Tina)
v7:
- refine framebuffer decoder code. (Zhenyu)
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
Windows guest driver needs vbt in opregion, to configure the setting
for display. Without opregion support, the display registers won't
be set and this blocks display model to get the correct information
of the guest display plane.
This patch is to provide a virtual opregion for guest. The original
author of this patch is Xiaoguang Chen.
This patch is split from the "Dma-buf support for GVT-g" patch set,
with being rebased to the latest gvt-staging branch.
v3:
- add checking region index during intel_vgpu_rw. (Xiong)
v2:
- refine intel_vgpu_reg_release_opregion. (Xiong)
Here are the previous version comments:
v18:
- unmap vgpu's opregion when destroying vgpu.
v16:
- rebase to 4.14.0-rc6.
Signed-off-by: Bing Niu <bing.niu@intel.com>
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Tested-by: Xiong Zhang <xiong.y.zhang@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
Currently guest opregion is allocated and initialised when guest
write opregion base register. This is too late for kvmgt, so
move it to vgpu_create time.
Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com>
Tested-by: Tina Zhang <tina.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
sparse spots
drivers/gpu/drm/i915/gvt/opregion.c:234 alloc_and_init_virt_opregion() error: memcpy() 'header->signature' too small (16 vs 17)
as gvt is indeed trying to memcpy a string longer than the signature[].
Fixes: b2d6ef70614e ("drm/i915/gvt: Let each vgpu has separate opregion memory")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Xiong Zhang <xiong.y.zhang@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Cc: intel-gvt-dev@lists.freedesktop.org
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Without masking out the old value, we can end up pointing the DDI to a
disabled PLL, which makes the system fall over. Mask out the previous
value before setting the PLL to DDI mapping.
This can be observed by running igt/testdisplay with both an eDP and
HDMI/DP output active.
v2: Add the Bugzilla link
Fixes: 555e38d273172 ("drm/i915/cnl: DDI - PLL mapping")
Testcase: igt/testdisplay
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103997
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matt Atwood <matthew.s.atwood@intel.com>
Signed-off-by: James Ausmus <james.ausmus@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Tested-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171201021700.13504-1-james.ausmus@intel.com
|
|
It has been many years since the last confirmed sighting (and fix) of an
RC6 related bug (usually a system hang). Remove the parameter to stop
users from setting dangerous values, as they often set it during triage
and end up disabling the entire runtime pm instead (the option is not a
fine scalpel!).
Furthermore, it allows users to set known dangerous values which were
intended for testing and not for production use. For testing, we can
always patch in the required setting without having to expose ourselves
to random abuse.
v2: Fixup NEEDS_WaRsDisableCoarsePowerGating fumble, and document the
lack of ilk support better.
v3: Clear intel_info->rc6p if we don't support rc6 itself.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171201113030.18360-1-chris@chris-wilson.co.uk
|
|
As we declare the GPU wedged if the reset fails, such a failure is quite
terminal. Before taking that drastic action, let's sleep first and try
active, in the hope that the hardware has quietened down and is then
able to reset. After a few such attempts, it is fair to say that the HW
is truly wedged.
v2: Always print the failure message now, we precheck whether resets are
disabled.
References: https://bugs.freedesktop.org/show_bug.cgi?id=104007
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171201122011.16841-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
|
|
Reject interlaced modes on VLV/CHV DP outputs. This simply does
not work correctly in the hardware. We do get some output, but
it's quite corrupted.
The available documentation fails to mention this fact. I
contacted some hardware people who eventually managed to locate
the relevant HSD for VLV, which was resolved by declaring
interlaced DP output as not supported. The HSD was never cloned
for CHV even though it inherited most of the hardware and
thus has the same problems with interlaced DP output.
Cc: Dennis Vshivkov <awesome.walrus+bugzilla@gmail.com>
Reported-by: Dennis Vshivkov <awesome.walrus+bugzilla@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103922
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171129180847.30613-1-ville.syrjala@linux.intel.com
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Get rid of the crtc->config usages from within
intel_pipe_{enable,disable}() by passing in the appropriate
crtc state.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171129153732.3612-3-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
We should make sure the pipe has fully started when we enable it from
the i830 "power well". Otherwise theoretically i830 could also hit
problems with vblank timestamps jumping around (since we skip the
wait during modeset on i830). Additionally moving planes between the
pipes etc. might not work correctly until both pipes are actually up and
running.
v2: Less pointless duplication in the code (Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171129153732.3612-2-ville.syrjala@linux.intel.com
|
|
Previously I was under the impression that the scanline counter
reads 0 when the pipe is off. Turns out that's not correct, and
instead the scanline counter simply stops when the pipe stops, and
it retains it's last value until the pipe starts up again, at which
point the scanline counter jumps to vblank start.
These jumps can cause the timestamp to jump backwards by one frame.
Since we use the timestamps to guesstimage also the frame counter
value on gen2, that would cause the frame counter to also jump
backwards, which leads to a massice difference from the previous value.
The end result is that flips/vblank events don't appear to complete as
they're stuck waiting for the frame counter to catch up to that massive
difference.
Fix the problem properly by actually making sure the scanline counter
has started to move before we assume that it's safe to enable vblank
processing.
v2: Less pointless duplication in the code (Chris)
Cc: stable@vger.kernel.org
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Fixes: b7792d8b54cc ("drm/i915: Wait for pipe to start before sampling vblank timestamps on gen2")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171129153732.3612-1-ville.syrjala@linux.intel.com
|
|
i830_disable_pipe() gets called from the power well code, and thus
we're already holding the power domain mutex. That means we can't
call plane->get_hw_state() as it will also try to grab the
same mutex and will thus deadlock.
Replace the assert_plane() calls (which calls ->get_hw_state()) with
just raw register reads in i830_disable_pipe(). As a bonus we can
now get a warning if plane C is enabled even though we don't even
expose it as a drm plane.
v2: Do a separate WARN_ON() for each plane (Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Fixes: 51f5a0963984 ("drm/i915: Add .get_hw_state() method for planes")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171129125411.29055-1-ville.syrjala@linux.intel.com
|
|
Transcoder EDP does not support audio. Let's not try to
read the state of the audio enable bit HSW_AUD_PIN_ELD_CP_VLD
based on the pipe when using transcoder EDP.
While at it make the function static and flatten it.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171129164303.18793-3-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
support audio
No point in adding the "force audio" property to DP connectors
that don't support audio (g4x or port A).
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171129164303.18793-2-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Apparently g4x doesn't support audio over DP. Bspec lists the
bit as "Reserved for Audio Output Enable", and empirical evidence
tells us that the bit won't stick. So stop trying to enable DP
audio on g4x.
Link: https://patchwork.freedesktop.org/patch/msgid/20171129164303.18793-1-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103989
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
|
|
To execute a requests requires us to have first woken the device, using
the rpm wakeref (as the request needs to write to hardware to setup the
context/ppGTT and execute on the GPU). So call intel_runtime_pm_get()
around queuing the request; the request itself will then carry a wakeref
until completion.
References: https://bugs.freedesktop.org/show_bug.cgi?id=103994
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171130094231.10405-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
|
|
When capturing the bo, we allocate an error object with an array of
min(vma->size, vma->node.size) pages, plus a bit for compression overhead.
However, when creating the fake vma to describe the bo, only one of the
sizes was filled in, resulting in a too small array. Through my and CI
testing, this was sufficient for the mostly empty NULL context as
it compressed well (or the out-of-bounds access simply didn't cause an
issue). However, in real workloads on Cannonlake, we were overflowing
that array and causing havoc with the random memory corruption.
Reported-by: Rafael Antognolli <rafael.antognolli@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103964
Fixes: 4e90a6e22272 ("drm/i915: Record default HW state in the GPU error state")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Tested-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171201001536.13941-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
|
|
drivers/gpu/drm/i915/i915_irq.c|3096 col 29| error: comparison between signed and unsigned integer expressions [-Werror=sign-compare]
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171130125253.21405-1-chris@chris-wilson.co.uk
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
|
|
This comment predates atomic, and I think with the way we currently
track IPS, it's safe to enable this for the case we switch too.
Changes since v1:
- Keep IPS enabled when switching planes.
Changes since v2:
- Enable IPS when at least one plane is enabled. (Ville)
Changes since v3:
- Actually do what was advertised in v3, sigh! (Ville, CI)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171122183906.47767-1-maarten.lankhorst@linux.intel.com
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
|
|
ips_enabled was used as a variable of whether IPS can be enabled or not,
but should be used to test whether IPS is actually enabled.
Changes since v1:
- Call needs_modeset on new crtc state. (Ville)
- IPS can be enabled with sprite plane enabled too. (Ville)
- Fix CDCLK vs IPS workaround. (Ville)
Changes since v2:
- Only re-enable fastset when inheriting mode. (Ville)
- Put the conditions for enabling and disabling IPS in a helper.
Changes since v3:
- Keep the max_cdclk workaround working. (Ville)
- Also check logical cdclk out of paranoia.
- Remove planes check from IPS disable function for initial disable.
- Remove assert_plane_enabled/disabled checks and use
crtc_state->active_planes for hsw_enable_ips only, always allow
calling hsw_disable_ips to disable it initially in hw.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171122183901.47720-1-maarten.lankhorst@linux.intel.com
[mlankhorst: pipe_config -> crtc_state (Ville)]
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
|
|
We store a SW state of the t11_t12 timing in 100usec units but have to
program it in 100msec as required by HW. The rounding used during
programming means there will be a mismatch between the SW and HW states
of this value triggering a "PPS state mismatch" error. Avoid this by
storing the already rounded-up value in the SW state.
Note that we still calculate panel_power_cycle_delay with the finer
100usec granularity to avoid any needless waits using that version of
the delay.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103903
Cc: joks <joks@linux.pl>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171129175137.2889-1-imre.deak@intel.com
|
|
If the HW is already wedged, attempting to submit a request will
generate an -EIO. If we tried this during suspend, we would abort
whereas all we want to do is to go sleep and throw away the corrupt
state.
Fixes: 5ab57c702069 ("drm/i915: Flush logical context image out to memory upon suspend")
Testcase: igt/gem_eio/suspend
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171130102951.14965-1-chris@chris-wilson.co.uk
|
|
Testing the texture read performance shows that the same tuning for
the SQ credits is needed on GLK as on BXT/APL. This has been also
confirmed by Altug from the HW team.
V4: Rebase + fix
Signed-off-by: Valtteri Rantala <valtteri.rantala@intel.com>
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com> (v1)
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1511880305-12166-1-git-send-email-valtteri.rantala@intel.com
|
|
This patch makes v9.39 firmware as default firmware for KBL.
Note: GuC logging control is changed with this firmware. GuC is
expecting i915 to set control bit to enable "default logging"
while using GuC action UK_LOG_ENABLE_LOGGING.
However i915 is currently not doing this because it is version
specific change and can be handled entirely in GuC. It will need
to be fixed in future firmwares.
This update includes (since v9.14):
- DCC spec changes for BXT + DCT enabling
- Bug Fix for power conservation feature SLPC_DCC
- Scheduler 1-element submission during DCC cycles.
- SB based Pre-ETM/ETM flow enabling for debug signed GuC/HuC
- Moving GuC non_critical r/w data to lower SRAM 64KB
- Media engine Reset fix. Correctly marking context for resubmission in
Media Reset case.
- ABT Disable bug fix. Disabled Evaluation mode on context change.
- Async FW in Engine Schedule feature (not enabled from KMD)
- GuC clean up to align developer build in line to production build.
- Disable ARAT interrupt before programming ARAT delta.
- Memory range check in Parse to avoid failure due to overflow.
- GuC Msg Channel Hang WA - Stall GUC for mmio access when IDI is low
during CPD flow.
- Fix for submit queue over flow issue
- Enabling IBC on KBL GT3 15W, GT4 45W
- Disabling wrong device ID WA in production signed kernel
- Enabling WA for MSGCH hang issue upto required KBL stepping
- Clear forcewake in CSB when SQ is empty.
- 3Tries of GuC2CSME wake request
- During reset one parameter was not getting accounted
- Disable DCC 1-elem mode submission
- Move UkGuckmdInterface.h file from 2016 folders to common 2016 folder.
- This is file location change.No functional change done as part of this
check in.
- Enabling Guc Log changes for ultra low logging for OCA
- Enabling Dynamic Render Power Well Hysteresis Programming for Compute
Worklaods
- Enabling build failure check to catch critical section overflow.
- Disable build.bat redundant prints.
- Move few least used functions to non-critical section.
- Rearrange GuC documentation folder structure.
- Synchronize SLPC internal debug interface with other branches.
- Fixing Issue with Default Guc Log changes for OCA using special Control
Bit
- Aggressive DCC implementation for supported platforms.
v2: Rebase. Updated commit message.
Signed-off-by: Jeff McGee <jeff.mcgee@intel.com>
Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Spotswood John A <john.a.spotswood@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Anusha Srivatsa<anusha.srivatsa@intel.com >
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1511972351-574-4-git-send-email-sagar.a.kamble@intel.com
|
|
This patch makes v9.29 firmware as default firmware for BXT.
Note: GuC logging control is changed with this firmware. GuC is
expecting i915 to set control bit to enable "default logging"
while using GuC action UK_LOG_ENABLE_LOGGING.
However i915 is currently not doing this because it is version
specific change and can be handled entirely in GuC. It will need
to be fixed in future firmwares.
This update includes (since v8.7):
- Added support to log media reset count for host to read it
- BXT WA for fixing MTP hangs. WaDisableDOPRenderClkGatingAtSubmit
- Sub-feature level control for power management features.
- Minor clean-up for power management interface.
- Unified power management interface and scheduler interface into
1 file using same version.
- Bug Fix for multi context scheduler flag.
- DCC spec changes for BXT + DCT enabling
- Springboard based Pre-ETM/ETM flow enabling for debug signed GuC/HuC
- Moving GuC non_critical r/w data to lower SRAM 64KB
- Enabled IBC for BXT
- Media engine Reset fix. Correctly marking context for resubmission in
Media Reset case.
- SLPC Dynamic RPe fix to resolve issues where incorrect frequency was set.
- ABT Disable bug fix. Disabled Evaluation mode on context change.
- GuC clean up to align developer build in line to production build.
- Disable ARAT interrupt before programming ARAT delta.
- Memory range check in Parse to avoid failure due to overflow.
- Clear forcewake in CSB when SQ is empty.
- SLPC IBC 1.6 for APL to ensure multiplier does not cap IA below Pe.
- Move UkGuckmdInterface.h file from 2016 folders to common 2016 folder.
- This is file location change. No functional change done as part of this
check in.
- 3 tries of wake request needed from GuC2CSME for ME to wake up. Request
has come from ME spec
- During reset one parameter was not getting accounted
- Enabling Guc Log changes for ultra low logging for OCA
- Disable build.bat redundant prints.
- Move few least used functions to non-critical section.
- Rearrange GuC documentation folder structure.
- Fixing Issue with Default Guc Log changes for OCA using special Control
Bit
v2: Rebase. Updated commit message.
Signed-off-by: Jeff McGee <jeff.mcgee@intel.com>
Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Spotswood John A <john.a.spotswood@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1511972351-574-3-git-send-email-sagar.a.kamble@intel.com
|
|
This patch makes v9.33 firmware as default firmware for SKL.
Note: GuC logging control is changed with this firmware. GuC is
expecting i915 to set control bit to enable "default logging"
while using GuC action UK_LOG_ENABLE_LOGGING.
However i915 is currently not doing this because it is version
specific change and can be handled entirely in GuC. It will need
to be fixed in future firmwares.
This update includes (since v6.1):
- HuC RSA Keys updated.
- Adding per engine preemption support in GuC scheduler
- Minor bug fixes.
- Added support to log media reset count for host to read it
- Sub-feature level control for power management features.
- Minor clean-up for power management interface.
- Unified power management interface and scheduler interface into
1 file using same version.
- Bug Fix for multi context scheduler flag.
- DCC spec changes for BXT + DCT enabling
- SB based Pre-ETM/ETM flow enabling for debug signed GuC/HuC
- Moving GuC non_critical r/w data to lower SRAM 64KB
- Media engine Reset fix. Correctly marking context for resubmission in
Media Reset case.
- ABT Disable bug fix. Disabled Evaluation mode on context change.
- Async FW in Engine Schedule feature (not enabled from KMD)
- GuC clean up to align developer build in line to production build.
- DCC consistency fix for SKL
- Disable ARAT interrupt before programming ARAT delta.
- Memory range check in Parse to avoid failure due to overflow.
- Enabled WA for MSGCH hang issue
- Clear forcewake in CSB when SQ is empty.
- Move UkGuckmdInterface.h file from 2016 folders to common 2016 folder.
- This is file location change.No functional change done as part of this
check in.
- Enable decoupled freq for SKL GT4
- 3 tries of wake request needed from GuC2CSME for ME to wake up. Request
has come from ME spec
- During reset one parameter was not getting accounted
- Enabling Guc Log changes for ultra low logging for OCA
- Enabling build failure check to catch critical section overflow.
- Disable build.bat redundant prints.
- Move few least used functions to non-critical section.
- Rearrange GuC documentation folder structure.
- Synchronize SLPC internal debug interface with other branches.
- Fixing Issue with Default Guc Log changes for OCA using special Control
Bit
v2: Rebase. Updated commit message.
Signed-off-by: Jeff McGee <jeff.mcgee@intel.com>
Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Spotswood John A <john.a.spotswood@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1511972351-574-2-git-send-email-sagar.a.kamble@intel.com
|
|
Sagar noticed the check can be consolidated between the engine stats
implementation and the PMU.
My first choice was a static inline helper but that got into include
ordering mess quickly fast so I went with a macro instead. At some point
we should perhaps looking into taking out the non-ringubffer bits from
intel_ringbuffer.h into a new intel_engine.h or something.
v2: Use engine->flags. (Chris Wilson)
v3: Rebase and mark GuC as not yet supported. (Chris Wilson)
v4: Move flag setting to intel_engines_reset_default_submission.
(Chris Wilson)
v5: Move flag setting to logical_ring_setup.
v6: intel_engines_reset_default_submission is the wrong place to set the
flag - it needs to be in execlists_set_default_submission. (Sagar)
v7: Flag setting in logical_ring_setup is not required. (Chris)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Suggested-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com> (v6)
Link: https://patchwork.freedesktop.org/patch/msgid/20171129102805.22690-1-tvrtko.ursulin@linux.intel.com
|
|
Will be adding a new per-engine flags shortly so it makes sense
to consolidate.
v2: Keep the original code flow in intel_engine_cleanup_cmd_parser.
(Joonas Lahtinen)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171129082409.18189-1-tvrtko.ursulin@linux.intel.com
|
