summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2013-07-24mwifiex: remove unnecessary del_timer(cmd_timer)Amitkumar Karwar1-2/+0
It is already there in mwifiex_unregister(). So unnecessary call in mwifiex_adapter_cleanup() is removed in this patch. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-24mwifiex: move del_timer_sync(scan_delay_timer) call to fix memleakAmitkumar Karwar2-7/+1
Currently it is in mwifiex_adapter_cleanup() which doesn't get called if driver initialization is failed causing memory leak. scan_delay_timer is initialized in mwifiex_register(), so it should be deleted in mwifiex_unregister(). Hence it has been moved to appropriate place. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-24mwifiex: add PCIe shutdown handler to avoid system hang on rebootAmitkumar Karwar1-0/+9
If reboot command is issued when device is in connected state, system hangs while booting. This issue is fixed by doing cleanup in shutdown handler. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-24mwifiex: correct max IE length check for WPS IEAvinash Patil1-5/+6
This patch is bug fix for an invalid boundry check for WPS IE. We should check max IE length against defined macro; instead we were checking it against size of pointer. Fix it. Also move IE length check before allocation of memory. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-24mwifiex: support to send deauth for P2P clientStone Piao1-0/+1
During P2P handshake, P2P client needs to send deauth after EAPOL FAILURE to GO. We need add bss mode for P2P client when handle deauth request. Without this change, deauth can not be sent out from P2P client side. Signed-off-by: Stone Piao <piaoyun@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-24mwifiex: skip registering mgmt frame that has already registeredStone Piao1-6/+10
Before sending command to firmware, we need to check the frame type. We skip registering the mgmt frame that has already been registered. Signed-off-by: Stone Piao <piaoyun@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-24mwifiex: discard deauth and disassoc event during WPS sessionStone Piao1-0/+10
Some GO will send deauth or disassoc packet at the end of WPS handshake, which causes P2P connecion failure due to the race condition between event path and data path. Signed-off-by: Stone Piao <piaoyun@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-24mwifiex: add tx info to skb when forming mgmt frameHuawei Yang1-0/+5
In function 'mwifiex_write_data_complete' it need tx info to find the mwifiex_private to updates statistics and wake up tx queues. Or we may trigger tx queues timeout when transmitting lots of mgmt frames. Signed-off-by: Huawei Yang <harvey.huawei.yang@gmail.com> Signed-off-by: Stone Piao <piaoyun@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-24mwifiex: delete AP TX queues when bridged packets reach thresholdAvinash Patil4-2/+69
Delete packets from TX queues for this mwifiex_private structure when bridged packet count reaches maximum threshold. Bridged packets from each RA List are deleted till they fall to low threshold of 128. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-24mwifiex: maintain outstanding packet count for RA list instead of packet sizeAvinash Patil3-7/+7
Maintain total outstanding packet count for RA list instead of total outstanding size as packet count metric seems more reasonable for checking threshold etc. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-24mwifiex: rename pkt_count to ba_pkt_count in mwifiex_ra_list_tbl structAvinash Patil2-5/+5
pkt_count is used to determine if BA can be formed on this RA list by comparing it with randomly generated BA threshold. The pkt_count variable name here is ambiguous and does not reflect its usage correctly. Rename it to ba_pkt_count. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-24mwifiex: remove stop_net_dev_queue operation in AP forwardingHuawei Yang1-4/+0
Under uAP mode mwifiex may stop all net tx queues on forwarding packets. This may stop some tx queues and they never have chance to be waked up. There is also no need to check tx_pending and stop queues here. Because local host has such kind of check when transmitting packets and it's not proper to have forwarding affect local transmitting. Signed-off-by: Huawei Yang <harvey.huawei.yang@gmail.com> Reviewed-by: Avinash Patil <patila@marvell.com> Acked-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-24iwl3945: better skb management in rx pathEric Dumazet1-12/+19
Steinar reported reallocations of skb->head with IPv6, leading to a warning in skb_try_coalesce() It turns out iwl3945 has several problems : 1) skb->truesize is underestimated. We really consume PAGE_SIZE bytes for a fragment, not the frame length. 2) 128 bytes of initial headroom is a bit low and forces reallocations. 3) We can avoid consuming a full page for small enough frames. Reported-by: Steinar H. Gunderson <sesse@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Paul Stewart <pstew@google.com> Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-23wil6210: drop -Werror compiler flagVladimir Kondratiev1-3/+0
In production code, don't use -Werror, as it causes random compilation failures due to compiler version and options used. With every new version of gcc, it becomes stricter and report more warnings. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-23wil6210: Enable TCP/UDP checksum HW offloadKirshenbaum Erez4-3/+101
Add support for TCP and UDP HW checksum offloading. RX chain is allways configured for offload mode. In case of checksum error in RX path the DMA L4 error bit(5) will be set to 1 and driver will drop the packet. TX checksum offloading is configrable (ethtool -K). TX descriptors are configured for checksum offload according to the SKB protocol type (TCP/UDP, IPV4/6), Upon mismatch drop the TX packet (checksum required but not TCP/UDP IPV4/6 type). Signed-off-by: Kirshenbaum Erez <erezk@wilocity.com> Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-23wil6210: fix error path in wil_tx_vringVladimir Kondratiev1-3/+4
Release fragments in the order of allocation; including one for skb head Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-23cw1200: Fix incorrect endianness annotation in a header fieldSolomon Peachy1-1/+1
Note that the driver doesn't directly use this field, but it should be correctly defined in any case. Signed-off-by: Solomon Peachy <pizza@shaftnet.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-23ath9k: Release the RF bus after setting board valuesSujith Manoharan1-9/+8
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-23ath9k: Program correct initvals for FCCSujith Manoharan1-1/+17
* CUS217 specific initvals have to be programmed. * iniAdditional is not used for AR9462/AR9565, remove it. * Handle channel 2484 for regulatory compliance. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-23ath9k: Use correct channel when switching bandsSujith Manoharan1-1/+2
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-23ath9k: Fix FastChannelChange for AR9462/AR9565Sujith Manoharan1-18/+27
Right now, even though these chips support cross-band FCC, the code is non-functional since we bail out early if the channelFlags differ. Fix this so that cross-band FCC works for cards that support this feature. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-23ath9k: Add a HW flag for FCCSujith Manoharan2-0/+8
Fast Channel Change across 2G/5G bands is supported only by AR9462 and AR9565. Add a HW capability field to indicate this. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-23ath9k: Move INI overrides to ar9003_hw_override_iniSujith Manoharan1-17/+16
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-23brcmsmac: Further reduce log spam from tx phy messagesJohn Greene2-5/+5
Relegate 2 phy messages to debug status as they create excessive log spam, noted in multiple bugzillas for brcmsmac v3.8 and up. This is a follow on to net-next 99e94940697adec4f84758adb2db71f4a82c7ba5: brcmsmac: Reduce log spam in heavy tx, make err print in debug brcmsmac bcma0:0: phyerr 0x10, rate 0x14 brcmsmac bcma0:0: brcms_c_ampdu_dotxstatus_complete: ampdu tx phy error (0x10) Signed-off-by: John Greene <jogreene@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-23bcma: fix handling of big addrlHauke Mehrtens1-8/+8
The return value of bcma_erom_get_addr_desc() is a unsigned value and it could wrap around in the two complement writing. This happens for one core in the BCM4708 SoC. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-23bcma: return correct error code when bus scan failedHauke Mehrtens1-1/+1
It is better to return the actual error code than just -1. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-23bcma: make it possible to select SoC support without mipsHauke Mehrtens1-2/+8
To make it possible to use the SoC host interface with ARM SoCs do not depend on the MIPS driver any more. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-23bcma: add some more core namesHauke Mehrtens1-0/+12
These cores were found on a BCM4708 (chipid 53010), this is a ARM SoC with two Cortex A9 cores. bcma: bus0: Found chip with id 0xCF12, rev 0x00 and package 0x02 bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x2A, class 0x0) bcma: bus0: Core 1 found: DMA (manuf 0x4BF, id 0x502, rev 0x01, class 0x0) bcma: bus0: Core 2 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x04, class 0x0) bcma: bus0: Core 3 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x04, class 0x0) bcma: bus0: Core 4 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x04, class 0x0) bcma: bus0: Core 5 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x04, class 0x0) bcma: bus0: Core 6 found: PCIe Gen 2 (manuf 0x4BF, id 0x501, rev 0x01, class 0x0) bcma: bus0: Core 7 found: PCIe Gen 2 (manuf 0x4BF, id 0x501, rev 0x01, class 0x0) bcma: bus0: Core 8 found: ARM Cortex A9 core (ihost) (manuf 0x4BF, id 0x510, rev 0x01, class 0x0) bcma: bus0: Core 9 found: USB 2.0 (manuf 0x4BF, id 0x504, rev 0x01, class 0x0) bcma: bus0: Core 10 found: USB 3.0 (manuf 0x4BF, id 0x505, rev 0x01, class 0x0) bcma: bus0: Core 11 found: SDIO3 (manuf 0x4BF, id 0x503, rev 0x01, class 0x0) bcma: bus0: Core 12 found: ARM Cortex A9 JTAG (manuf 0x4BF, id 0x506, rev 0x01, class 0x0) bcma: bus0: Core 13 found: Denali DDR2/DDR3 memory controller (manuf 0x4BF, id 0x507, rev 0x01, class 0x0) bcma: bus0: Core 14 found: ROM (manuf 0x4BF, id 0x508, rev 0x01, class 0x0) bcma: bus0: Core 15 found: NAND flash controller (manuf 0x4BF, id 0x509, rev 0x01, class 0x0) bcma: bus0: Core 16 found: SPI flash controller (manuf 0x4BF, id 0x50A, rev 0x01, class 0x0) Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-23wil6210: fix subtle race in wil_tx_vringVladimir Kondratiev1-5/+6
Finish all SW context modifications prior to notifying hardware It used to be race condition: if HW finish Tx and issue Tx completion IRQ very fast, prior to SW context update in wil_tx_vring, Tx completion will mis-handle descriptor, as SW part will have no skb pointer stored. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-23wil6210: Introduce struct for sw contextVladimir Kondratiev3-28/+44
Enable adding more data to the SW context. For now, add flag "mapped_as_page", to separate decisions on free-ing skb and type of DMA mapping. This allows linking skb itself to any descriptor of fragmented skb. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-23wil6210: Optimize Tx completionVladimir Kondratiev1-4/+6
No need to modify HW descriptor, as it will be re-initialized on Tx. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-23wil6210: fix wrong index in wil_vring_freeVladimir Kondratiev1-1/+1
When destroying Rx vring, branch for Rx used wrong Tx descriptor: while SW context was taken for "head", HW descriptor was, by mistake, taken from "tail" Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-23wil6210: Align WMI header with latest FWVladimir Kondratiev3-17/+36
FW guys changed header structure; align driver code Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-23rt2x00: rt2800usb: add USB device ID for Linksys AE3000Gabor Juhos2-0/+10
The Linksys AE3000 device is based on the RT3573 chipset. The support for this chipset is available already, and the AE3000 device works with the driver. Only managed mode works correctly at the moment, for AP mode additional changes are needed in the driver. Also add a new RT2800USB_RT3573 Kconfig option and only enable support for RT3573 based devices if that is enabled. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-23rt2x00: rt2800usb: use correct [RT]XWI size for RT3593Gabor Juhos2-1/+5
The RT3593 chipset requires different [RT]XWI size values. Modify the driver to use the correct values. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-23rt2x00: rt2800lib: enable RT3593 supportGabor Juhos1-0/+1
Support for the RT3593 has been implemented in the previous changes, so it is safe to mark it supported in the driver. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-23rt2x00: rt2800lib: enable RF3053 supportGabor Juhos1-0/+1
Support for the RF3053 has been implemented in the previous changes, so it is safe to mark it supported in the driver. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-23rt2x00: rt2800lib: enable VCO recalibration for RF3053Gabor Juhos1-0/+2
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-23rt2x00: rt2800lib: add channel configuration for RF3053Gabor Juhos2-3/+409
Based on the Ralink DPO_RT5572_LinuxSTA_2.6.0.1_20120629 driver. Reference: RT3593_ChipSwitchChannel in chips/rt3593.c Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-23rt2x00: rt2800lib: add rf_vals for RF3053Gabor Juhos1-0/+70
Based on the Ralink DPO_RT5572_LinuxSTA_2.6.0.1_20120629 driver. References: FreqItems3053 in chips/rt3593.c Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-23rt2x00: rt2800lib: add default_power3 field for three-chain devicesGabor Juhos2-0/+23
The actual code uses two default TX power values. This is enough for 1T and for 2T devices however on 3T devices another value is needed for the third chain. Add a new field to struct channel_info and initialize it from the 'rt2800_probe_hw_mode' function. Also modify the 'rt2800_config_channel' to handle the new field as well. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-23rt2x00: rt2800lib: fix LNA_A[12] gain values for RT3593Gabor Juhos2-12/+47
The LNA_A[12] gain values are stored at a different offset in the EEPROM on RT3593 based devices. However the current code unconditionally reads those values from the location used by other chipsets. Fix the code to use the correct EEPROM offset. Based on the DPO_RT5572_LinuxSTA_2.6.0.1_20120629 driver. References: RT3593_EEPROM_RSSI2_OFFSET_ALNAGAIN1_24G_READ in include/chip/rt3593.h RT3593_EEPROM_RSSI2_OFFSET_ALNAGAIN2_5G_READ in include/chip/rt3593.h Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-23rt2x00: rt2800lib: hardcode TX mixer gain values for RT3593Gabor Juhos1-0/+6
The reference code uses hardcoded zero TX mixer gain value for RT3593. Do the same in the rt2x00 driver. Based on the Ralink DPO_RT5572_LinuxSTA_2.6.0.1_20120629 driver. Reference: NICReadEEPROMParameters in common/rtmp_init.c Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-23rt2x00: rt2800lib: introduce rt2800_get_txmixer_gain_{24,5}g helpersGabor Juhos1-14/+24
Move the TX mixer gain reading code into separate helper functions in preparation for RT3593 support. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-23rt2x00: rt2800lib: fix default TX power values for RT3593Gabor Juhos2-0/+14
The TX power values in the EEPROM are using a different format for the RT3593 chip. The default TX power value uses bits 0..4 only. Bits 5..8 contains value for fine grained power control. Additionally, the lower and upper limits of the TX power values are the same for both bands. Improve the rt2800_txpower_to_dev function, in order to compute the correct default power values for the RT3593 chip as well. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-23rt2x00: rt2800lib: add rt2800_txpower_to_dev helperGabor Juhos2-13/+14
Introduce a new helper function for converting the default TX power values from EEPROM into mac80211 values. The change improves the readability and it makes it easier to add support for other chipsets. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-23rt2x00: rt2800lib: fix antenna configuration for RT3593Gabor Juhos1-0/+7
On the RT3593 chipset, BBP register 86 must be configured by different values based on the RX antenna numbers. Configure this register from the 'rt2800_config_ant' function. Based on the Ralink DPO_RT5572_LinuxSTA_2.6.0.1_20120629 driver. Reference: RT3593_CONFIG_SET_BY_ANTENNA in include/chip/rt3593.h Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-23rt2x00: rt2800lib: fix BBP1_TX_ANTENNA field configuration for 3T devicesGabor Juhos1-1/+1
The field must be set to 2 instead of 0 for devices with three TX chains. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-23rt2x00: rt2800lib: add TX power configuration for RT3593Gabor Juhos2-3/+538
Based on the Ralink DPO_RT5572_LinuxSTA_2.6.0.1_20120629 driver. References: RTMPReadTxPwrPerRateExt in chips/rt3593.c RT3593_AsicGetTxPowerOffset in chips/rt3593.c Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-23rt2x00: rt2800lib: add BBP post initialization for RT3593Gabor Juhos1-1/+47
Based on the Ralink DPO_RT5572_LinuxSTA_2.6.0.1_20120629 driver. Reference: RT3593_PostBBPInitialization in chips/rt3553.c Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-02-24 20:22:36 +0300