summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2011-11-18usb: Netlogic: Use CPU_XLR in place of NLM_XLRJayachandran C2-2/+2
Use CONFIG_CPU_XLR instead of CONFIG_NLM_XLR, the NLM_XLR config option is redundant and is being removed. Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-18USB: make the usbfs memory limit configurableAlan Stern1-4/+22
The 16-MB global limit on memory used by usbfs isn't suitable for all people. It's a reasonable default, but there are applications (especially for SuperSpeed devices) that need a lot more. This patch (as1498) creates a writable module parameter for usbcore to control the global limit. The default is still 16 MB, but users can change it at runtime, even after usbcore has been loaded. As a special case, setting the value to 0 is treated the same as the hard limit of 2047 MB. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-18USB: change the memory limits in usbfs URB submissionAlan Stern1-19/+57
For a long time people have complained about the limitations imposed by usbfs. URBs coming from userspace are not allowed to have transfer buffers larger than a more-or-less arbitrary maximum. While it is generally a good idea to avoid large transfer buffers (because the data has to be bounced to/from a contiguous kernel-space buffer), it's not the kernel's job to enforce such limits. Programs should be allowed to submit URBs as large as they like; if there isn't sufficient contiguous memory available then the submission will fail with a simple ENOMEM error. On the other hand, we would like to prevent programs from submitting a lot of small URBs and using up all the DMA-able kernel memory. To that end, this patch (as1497) replaces the old limits on individual transfer buffers with a single global limit on the total amount of memory in use by usbfs. The global limit is set to 16 MB as a nice compromise value: not too big, but large enough to hold about 300 ms of data for high-speed transfers. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-18USB: unify some error pathways in usbfsAlan Stern1-46/+50
This patch (as1496) unifies the error-return pathways of several functions in the usbfs driver. This is not a very important change by itself; it merely prepares the way for the next patch in this series. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-18USB: remove homegrown UTF conversion routine for gadgetsAlan Stern2-69/+5
This patch (as1502) removes the UTF8-to-UTF16 conversion routine in the USB gadget library and replaces it with a call to the equivalent function in the NLS library. The only downside worth noting is that the NLS library routine requires the output buffer to be 16-bit aligned. This is always true in the gadget code, because the output buffer is always a usb_request buffer being used to send a string descriptor. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-18NLS: improve UTF8 -> UTF16 string conversion routineAlan Stern1-4/+6
The utf8s_to_utf16s conversion routine needs to be improved. Unlike its utf16s_to_utf8s sibling, it doesn't accept arguments specifying the maximum length of the output buffer or the endianness of its 16-bit output. This patch (as1501) adds the two missing arguments, and adjusts the only two places in the kernel where the function is called. A follow-on patch will add a third caller that does utilize the new capabilities. The two conversion routines are still annoyingly inconsistent in the way they handle invalid byte combinations. But that's a subject for a different patch. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-18OHCI: remove uses of hcd->stateAlan Stern14-49/+45
This patch (as1500) removes all uses of the objectionable hcd->state variable from the ohci-hcd family of drivers. It is replaced by a private ohci->rh_state field, just as in uhci-hcd and ehci-hcd. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-15USB: serial: do not forward USB specific errors in writeJohan Hovold1-0/+2
Use usb_translate_errors() to map USB-specific errors to errors appropriate for user space (ENOMEM, ENODEV and EIO) in write. Currently almost all serial drivers simply forward error codes from the stack (e.g. from usb_submit_urb()), but these codes often have different meanings in user-space. Doing the mapping in usb-serial core simplifies driver code and allows for more consistent error reporting. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-15USB: serial: fix whitespace issuesJohan Hovold1-8/+9
Minor whitespace clean ups. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-15USB: oti6858: forward USB errors to USB serial coreJohan Hovold1-1/+1
Forward errors from usb_submit_urb in open. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-15USB: oti6858: remove dead codeJohan Hovold1-12/+0
Remove code that was apparently copied from pl2303, disabled and then never used. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-15USB: iuu_phoenix: forward USB errors to USB serial coreJohan Hovold1-2/+1
Forward errors from usb_submit_urb in open. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-15USB: cp210x: forward USB errors to USB serial coreJohan Hovold1-6/+13
Make sure we forward all error codes (e.g. ENOMEM) to USB serial core. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-15USB: ch341: forward USB errors to USB serial coreJohan Hovold1-1/+1
All error messages from stack in open are being forwarded except for one call to usb_submit_urb. Change this for consistency. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-15USB: serial: do not forward USB specific errors in openJohan Hovold1-0/+4
Use usb_translate_errors() to map USB-specific errors to errors appropriate for user space (ENOMEM, ENODEV and EIO) in open. Currently almost all serial drivers simply forward error codes from the stack (e.g. from usb_submit_urb()), but these codes often have different meanings in user-space. Doing the mapping in usb-serial core simplifies driver code and allows for more consistent error reporting. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-15USB: move usb_translate_errors to linux/usb.hJohan Hovold1-14/+0
Move usb_translate_errors from usb core to linux/usb.h as it is meant to be accessed from drivers. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-15USB: serial: add support for multiple read urbsJohan Hovold2-40/+93
Add support for multiple read urbs to generic read implementation. Use a static array of two read urbs for now which is enough to get a 50% throughput increase in one test setup. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-15USB: pl2303: use usb_serial_generic_openJohan Hovold1-1/+1
Use generic open rather than calling usb_serial_submit_read_urb directly. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-15USB: pl2302: clean up error handling in openJohan Hovold1-8/+7
Reorder urb submission and simply kill interrupt urb should read-urb submission fail (rather than calling close). Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-15USB: pl2303: return errors from usb_submit_urb in openJohan Hovold1-2/+2
Return errors from usb_submit_urb rather than EPROTO on errors in open. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-15USB: usb_debug: use process_read_urbJohan Hovold1-4/+3
Use process_read_urb rather than read_bulk_callback for break processing. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-15USB: usb_debug: fix indentationJohan Hovold1-3/+3
Use tabs for indentation. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-15USB: serial: reuse generic write urb and bulk-out bufferJohan Hovold1-19/+4
Reuse first write urb and bulk-out buffer of the generic write implementation for drivers that rely on port->write_urb rather than allocating them separately. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-15USB: serial: remove unnecessary bulk-urb re-fillsJohan Hovold4-40/+3
Remove unnecessary re-fills of bulk urbs whose fields have not changed since port probe. Compile-only tested. Cc: Matthias Bruestle and Harald Welte <support@reiner-sct.com> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-15USB: serial: remove unnecessary reinitialisations of urb fieldsJohan Hovold2-7/+0
Remove unnecessary reinitialisations of completion and context fields of urbs. Compile-only tested. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-15USB: serial: remove unnecessary reinitialisations of urb->devJohan Hovold20-107/+8
Remove unnecessary reinitialisations of urb->dev before each submission, which were based on the (no longer valid) assumption that serial->dev will be set to NULL on close. Compile-only tested. Cc: Matthias Bruestle and Harald Welte <support@reiner-sct.com> Cc: Lonnie Mendez <dignome@gmail.com> Cc: Peter Berger <pberger@brimson.com> Cc: Al Borchers <alborchers@steinerpoint.com> Cc: Support Department <support@connecttech.com> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-15USB: mos7720: remove unused codeJohan Hovold1-3/+0
Remove variable port0 from open as it is not used. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-15USB: mos7720: remove incorrect read-urb checkJohan Hovold1-10/+0
Remove incorrect and unnecessary check for port->read_urb which is not set to NULL, contrary to what seems to be assumed, when urb is killed. Compile only-tested. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-15USB: keyspan_pda: clean up write-urb busy handlingJohan Hovold1-5/+5
Use port write_urbs_free mask rather than write_urb_busy field in struct serial_port. Compile-only tested. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-15USB: cyberjack: clean up write-urb busy handlingJohan Hovold1-8/+4
Use port write_urbs_free mask rather than write_urb_busy field in struct serial_port. Compile-only tested. Cc: Matthias Bruestle and Harald Welte <support@reiner-sct.com> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-15USB: omninet: clean up write-urb busy handlingJohan Hovold1-10/+4
Use port write_urbs_free mask rather than write_urb_busy field in struct serial_port. Compile-only tested. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-15USB: omninet: fix write_roomJohan Hovold1-1/+1
Fix regression introduced by commit 507ca9bc047666 ([PATCH] USB: add ability for usb-serial drivers to determine if their write urb is currently being used.) which inverted the logic in write_room so that it returns zero when the write urb is actually free. Signed-off-by: Johan Hovold <jhovold@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-15USB: serial: remove changelogs and old todo entriesJohan Hovold13-1340/+0
Remove remaining changelogs from file headers (can still be retrieved through git). Remove even older changelog entries stored in Changelog.history. Remove outdated todo entries from belkin_sa. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-15usb: OHCI/EHCI-XLS: Use resource_size v3Thomas Meyer2-2/+2
Use resource_size function on resource object instead of explicit computation. The semantic patch that makes this change is available in scripts/coccinelle/api/resource_size.cocci. Signed-off-by: Thomas Meyer <thomas@m3y3r.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-15USB: Realtek cr: Use kmemdup rather than duplicating its implementationThomas Meyer1-2/+1
Use kmemdup rather than duplicating its implementation The semantic patch that makes this change is available in scripts/coccinelle/api/memdup.cocci. Signed-off-by: Thomas Meyer <thomas@m3y3r.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-15usb: storage: shuttle_usbat: fix sparse warningFelipe Balbi1-1/+1
Fix the following sparse warning: | drivers/usb/storage/shuttle_usbat.c:173:22: warning: | symbol 'usbat_usb_ids' was not declared. Should | it be static? Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-15usb: storage: sddr55: fix sparse warningFelipe Balbi1-1/+1
Fix the following sparse warning: | drivers/usb/storage/sddr55.c:51:22: warning: symbol | 'sddr55_usb_ids' was not declared. Should it | be static? Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-15usb: storage: sddr09: fix sparse warningFelipe Balbi1-1/+1
Fix the following sparse warning: | drivers/usb/storage/sddr09.c:74:22: warning: symbol | 'sddr09_usb_ids' was not declared. Should it | be static? Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-15usb: storagE: realtek_cr: fix sparse warningsFelipe Balbi1-6/+5
Fix the following sparse warnings: | drivers/usb/storage/realtek_cr.c:821:6: warning: symbol | 'rts51x_invoke_transport' was not declared. Should | it be static? | | drivers/usb/storage/realtek_cr.c:980:5: warning: symbol | 'realtek_cr_suspend' was not declared. Should it | be static? | | drivers/usb/storage/realtek_cr.c:518:23: warning: cast | truncates bits from constant value (fe47 becomes 47) Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-15usb: storage: onetouch: fix sparse warningFelipe Balbi1-1/+1
Fix the following sparse warning: | drivers/usb/storage/onetouch.c:72:22: warning: symbol | 'onetouch_usb_ids' was not declared. Should it | be static? Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-15usb: storage: karma: fix sparse warningFelipe Balbi1-1/+1
Fix the following sparse warning: | drivers/usb/storage/karma.c:62:22: warning: symbol | 'karma_usb_ids' was not declared. Should it | be static? Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-15usb: storage: jumpshot: fix sparse warningFelipe Balbi1-1/+1
Fix the following sparse warning: | drivers/usb/storage/jumpshot.c:74:22: warning: symbol | 'jumpshot_usb_ids' was not declared. Should it | be static? Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-15usb: storage: isd200: fix sparse warningFelipe Balbi1-1/+1
Fix the following sparse warning: | drivers/usb/storage/freecom.c:122:22: warning: symbol | 'freecom_usb_ids' was not declared. Should it | be static? Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-15usb: storage: freecom: fix sparse warningFelipe Balbi1-1/+1
Fix the following sparse warning: | drivers/usb/storage/freecom.c:122:22: warning: symbol | 'freecom_usb_ids' was not declared. Should it | be static? Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-15usb: storage: ene_ub6250: fix sparse warningsFelipe Balbi1-6/+6
Fix the following sparse warnings: | drivers/usb/storage/ene_ub6250.c:45:22: warning: symbol | 'ene_ub6250_usb_ids' was not declared. Should it | be static? | | drivers/usb/storage/ene_ub6250.c:780:5: warning: symbol | 'ms_lib_alloc_logicalmap' was not declared. Should it | be static? | | drivers/usb/storage/ene_ub6250.c:2251:5: warning: symbol | 'ms_scsi_irp' was not declared. Should it be static? | | drivers/usb/storage/ene_ub6250.c:638:29: warning: right shift by bigger | than source value | | drivers/usb/storage/ene_ub6250.c:639:29: warning: right shift by bigger | than source value Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-15usb: storage: datafab: fix sparse warningFelipe Balbi1-1/+1
Fix the following sparse warning: | drivers/usb/storage/datafab.c:91:22: warning: symbol | 'datafab_usb_ids' was not declared. Should it | be static? Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-15usb: storage: cypress: fix sparse warningFelipe Balbi1-1/+1
Fix the following sparse warning: | drivers/usb/storage/cypress_atacb.c:46:22: warning: | symbol 'cypress_usb_ids' was not declared. Should | it be static? Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-15usb: storage: alauda: fix sparse warningsFelipe Balbi1-1/+1
Fix the following warning: | drivers/usb/storage/alauda.c:142:22: warning: symbol | 'alauda_usb_ids' was not declared. Should it | be static? Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-15USB: Add optional match for interface class to dynamic ID facilityJosua Dietze1-1/+7
When adding the ID of a composite device dynamically to a driver, all hitherto unbound interfaces are bound to this driver regardless of their class, which may not be intended. The patch adds the option to tell the targeted interface class to a driver via the "new_id" attribute, in addition to the device ID. Also, it appends the ABI documentation accordingly. Example: $ echo "1234 2a2a ff" >/sys/bus/usb-serial/drivers/option1/new_id will bind only vendor-specific interfaces to the 3G driver. Signed-off-by: Josua Dietze <digidietze@draisberghof.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-15USB: ehci: report Data Buffer Error in debug modeVikram Pandita1-0/+11
Data Buffer Error as per spec section 4.15.1.1.2 results when there is Underrun or Overrun condition. This error is considered non-fatal and never gets reported. Its a very good indication on things going wrong at system level, like running memory at much slower speed. This is a good error to flag allowing system level corrections. An issue was found with OMAP4460 board where DDR had to be run at full speed and this logging helped. Signed-off-by: Vikram Pandita <vikram.pandita@ti.com> Reviewed-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Vikram Pandita <vikram.pandita@ti.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3 (git 2.39.0) at 2025-02-08 02:00:53 +0300