| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
commit d2ee4d47aacbd2ba456092eeec670dba35fde291 upstream.
Valid bandwidth group IDs range from 1 through MAX_GROUPS, while Group
ID 0 is reserved. tb_consumed_dp_bandwidth() uses the Group ID directly
to index its local group_reserved[] array.
The array currently has MAX_GROUPS entries, so its valid indices are 0
through MAX_GROUPS - 1. Group ID MAX_GROUPS therefore accesses one
element past the end, and the final group's reserved bandwidth is not
included when the array is summed.
Give group_reserved[] MAX_GROUPS + 1 entries so direct Group ID
indexing covers the reserved ID 0 and valid IDs 1 through MAX_GROUPS.
Fixes: 52a4490e89d7 ("thunderbolt: Reserve released DisplayPort bandwidth for a group for 10 seconds")
Cc: stable@vger.kernel.org
Signed-off-by: Xu Rao <raoxu@uniontech.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d6764992f17b23d91ff93ce905ab53c2aa7191f0 upstream.
tb_drom_parse_entry_port() validates the device-supplied header->index
against sw->config.max_port_number before indexing sw->ports[], but the
sibling field entry->dual_link_port_nr -- a 6-bit value also read from
the DROM -- indexes the same array with no such check. A malicious or
malformed Thunderbolt device can set dual_link_port_nr beyond the
allocated sw->ports[] (max_port_number + 1 entries), producing an
out-of-bounds tb_port pointer that is stored and later dereferenced.
Reject a port entry whose dual_link_port_nr exceeds max_port_number,
the same bound already applied to header->index.
Fixes: cd22e73bdf5e ("thunderbolt: Read port configuration from eeprom.")
Cc: stable@vger.kernel.org
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c4f6916a99cf105c3ff340b6210fcbba3fa66b35 upstream.
comp_write_worker() returns true when the compared data matches.
memcmp() returns zero for equal data and non-zero for different data, so
its result must be negated before it is stored in a bool.
The first segment already uses !memcmp(), but the wrapped segment uses
memcmp() directly, reversing the match result. Use !memcmp() there as
well.
Fixes: 38d5c8336e60 ("scsi_debug: add Report supported opcodes+tmfs; Compare and write")
Cc: stable@vger.kernel.org
Signed-off-by: Xu Rao <raoxu@uniontech.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Link: https://patch.msgid.link/E5AD42E9C0E18633+20260803095328.3445311-1-raoxu@uniontech.com
Signed-off-by: Martin K. Petersen (Oracle) <mkp@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6b69f2ef10cdb018c0b127a7cab88e590bbddba4 upstream.
The EEPROM board ID is a fixed 13-byte field and is not guaranteed to
contain a NUL terminator. Passing it directly to
devlink_info_version_fixed_put() treats it as a C string and may read
beyond the field.
Format at most OCP_BOARD_ID_LEN bytes into the existing local buffer
before reporting the ID. Use a precision limit because the snprintf()
output size alone does not bound the source string scan.
Fixes: 0cfcdd1ebcfe ("ptp: ocp: add nvmem interface for accessing eeprom")
Cc: stable@vger.kernel.org
Signed-off-by: Ahmad Byagowi <ahmadexp@gmail.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20260804210751.48248-1-ahmadexp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ff8da20b6f47c48d46e47f93f7a59e2d56ee9107 upstream.
Revert commit 030a48b0f6ce ("thermal/drivers/hwmon: Cleanup coding style
a bit") that introduced a use-after-free into the error path of
thermal_add_hwmon_sysfs() by removing a valid check from it.
Link: https://lore.kernel.org/linux-hwmon/20260803183915.4ED7D1F000E9@smtp.kernel.org/
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/5123895.31r3eYUQgx@rafael.j.wysocki
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit de845981da67a6b049080c87e605130b0c30adc5 upstream.
vq->meta_iotlb[] caches the vhost_iotlb_map that backs each vring
metadata region, and iotlb_access_ok() returns early on a cache hit,
taking the hit as proof that the region has already been validated:
if (vhost_vq_meta_fetch(vq, addr, len, type))
return true;
The cache is reset on VHOST_IOTLB_UPDATE and VHOST_IOTLB_INVALIDATE, on
device IOTLB (re)initialisation and on vq reset, but not when
VHOST_SET_VRING_ADDR replaces vq->desc, vq->avail and vq->used, nor when
VHOST_SET_VRING_NUM changes the region sizes.
With a device IOTLB attached both ioctls are accepted while the vq is
live, and neither validates the addresses at ioctl time: vq_access_ok()
and vq_log_used_access_ok() return true early because the addresses are
GIOVAs, deferring validation to prefetch time. Once the cache has been
populated that deferred validation no longer runs -- vq_meta_prefetch()
hits the stale entry and returns true -- and vhost_vq_meta_fetch() keeps
translating through the old mapping as
map->addr + addr - map->start
for an address the mapping no longer covers. vhost_copy_to_user() and
vhost_copy_from_user() consume the result with __copy_to_user() and
__copy_from_user(), which do not check it either, so a subsequent used
ring update or descriptor fetch accesses memory outside the region the
IOTLB actually maps.
Reset the metadata cache whenever the vring is reconfigured, so the new
addresses are pushed back through iotlb_access_ok()'s slow path.
Fixes: f88949138058 ("vhost: introduce O(1) vq metadata cache")
Cc: stable@vger.kernel.org
Assisted-by: tencentos-corvus-ai:kimi-k3
Signed-off-by: Jun Yang <junvyyang@tencent.com>
Message-ID: <20260803014823.68623-1-juny24602@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit cb6379feaaff11c4e1e79c26c745ffa23182768a upstream.
veth exposes non-linear skb fragments through an xdp_buff. If an XDP
program adjusts the fragment area, veth_xdp_rcv_skb() copies
xdp_frags_size back to skb->data_len but leaves skb->len containing the
old fragment contribution.
After a fragment shrink, this makes skb_headlen() larger than the actual
linear area. In the reproduced UDP receive path, __skb_datagram_iter()
copied 1024 bytes past the actual linear tail to userspace, starting at
struct skb_shared_info. The copied bytes included the affected skb's
nr_frags, xdp_frags_size, and a kernel pointer from
skb_shinfo(skb)->frags[0]. Real packet data was displaced by the same
amount and truncated at the end.
Subtract the old data_len before replacing it and add the new data_len
afterwards, keeping skb->len and skb->data_len synchronized.
Additionally, bpf_xdp_pull_data() can advance data_end while leaving
frags present. The skb is then still non-linear, so the old
__skb_put(skb, off) triggers SKB_LINEAR_ASSERT().
Use skb_set_tail_pointer() and update skb->len explicitly instead,
following bpf_prog_run_generic_xdp(). Unlike __skb_put(),
skb_set_tail_pointer() does not require a linear skb.
A 60000-byte UDP datagram on a veth pair with MTU 64000 was shortened by
1024 bytes from its fragment area. Before the fix, all 10 runs produced
corrupted payloads. After the fix, all 10 runs matched the expected
payload exactly. A forced-tailroom reproducer also exercises
bpf_xdp_pull_data() with frags still present; the old code triggers
SKB_LINEAR_ASSERT(), while this fix passes 10/10 runs.
Fixes: 718a18a0c8a6 ("veth: Rework veth_xdp_rcv_skb in order to accept non-linear skb")
Cc: stable@vger.kernel.org
Reported-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Link: https://lore.kernel.org/bpf/80687d9c-9c27-494c-b3f2-efd0230b1895@gmail.com/
Suggested-by: Lorenzo Bianconi <lorenzo@kernel.org>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Sun Jian <sun.jian.kdev@gmail.com>
Link: https://patch.msgid.link/20260804054040.613675-3-sun.jian.kdev@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b37971686ec59fb027fa4910ba16805e68fddb97 upstream.
vxlan_changelink() arms vxlan->age_timer whenever the requested ageing
interval differs from the configured one:
if (conf.age_interval != vxlan->cfg.age_interval)
mod_timer(&vxlan->age_timer, jiffies);
There is no netif_running() test, so the timer is armed even on a device
that was never brought up. The only synchronous cancel in the driver is
the timer_delete_sync() in vxlan_stop(), which is .ndo_stop.
netif_close_many() drops devices without IFF_UP before
__dev_close_many() runs, so that cancel is skipped for such a device.
vxlan_setup() sets dev->needs_free_netdev = true and age_timer is a
member of struct vxlan_dev, so free_netdev() releases the allocation the
timer lives in while it is still queued on a timer_base.
expire_timers() unlinks the entry before it loads timer->function, so
the timer core writes through the freed object's list pointers:
BUG: KASAN: slab-use-after-free in __run_timers+0x208/0x654
Write of size 8 at addr ffff00001adace68 by task true/192
__asan_store8+0x84/0xac
__run_timers+0x208/0x654
run_timer_softirq+0x154/0x18c
Allocated by task 189:
alloc_netdev_mqs+0x64/0x720
rtnl_create_link+0x4ac/0x520
rtnl_newlink+0x758/0xd00
Freed by task 191:
netdev_release+0x40/0x58
netdev_run_todo+0x4a4/0x8c0
rtnl_dellink+0x200/0x4e8
The rtnl operations involved are netns-scoped, so an unprivileged user
can perform them in a new user and network namespace.
Arming the timer on a down device never had an effect: vxlan_cleanup()
returns early on !netif_running(), and vxlan_open() arms the timer for
any non-zero interval once the device is brought up. Add the missing
test.
Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com>
Fixes: 40051c4dcad5 ("vxlan: Allow changing ageing time")
Cc: stable@vger.kernel.org
Signed-off-by: Baul Lee <baul.lee@xbow.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260809111829.78834-1-baul.lee@xbow.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c27e360545373b7aee9862a5beef3b9fb3df0c25 upstream.
dibs->lock is initialised by dibs_dev_add(), but a dibs device can
already take interrupts before that call: ism_probe() runs
ism_dev_init(), and hence request_irq(), before it calls
dibs_dev_add(). No client can have registered a dmb at that point, so
no dmb interrupt can occur, but a GID event interrupt can, and
ism_handle_irq() takes dibs->lock unconditionally on entry, before it
inspects anything else.
Initialise the lock in dibs_dev_alloc() instead, so that it is valid as
soon as a driver can publish the device to its interrupt handler.
Fixes: cc21191b584c ("dibs: Move data path to dibs layer")
Cc: stable@vger.kernel.org
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Hidayath Khan <hidayath@linux.ibm.com>
Link: https://patch.msgid.link/20260730124227.167829-1-hidayath@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b96c529cd2551b78316a4afa3237b2ed96ba03c8 upstream.
devres teardown is LIFO. The aperture devres node was registered after
the DRM device node, so devres_release_all() unmaps the aperture before
the DRM device release callback fires amdgpu_device_fini_sw(). IP
sw_fini callbacks (e.g. vcn_v4_0_sw_fini) write to fw_shared through a
pointer derived from aper_base_kaddr, causing a kernel page fault on
probe failure / rollback:
BUG: unable to handle page fault ... PMD 0
RIP: vcn_v4_0_sw_fini+0x7b/0x170 [amdgpu]
Call Trace:
amdgpu_device_fini_sw
amdgpu_driver_release_kms
devm_drm_dev_init_release
devres_release_all
This reverts commit d871e99879cb5fd1fa798b006b4888887e63a17a.
Fixes: d871e99879cb ("drm/amdgpu: fix aperture mapping leak")
Reported-by: Yuansheng Mao <yuansheng.mao@amd.com>
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 336e0cd576817ac64a4b394ca2b3680029f3e37f)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e8e7471ef686b6c002218fee9671cc61992ae01a upstream.
aq_ring_rx_deinit() only walks [sw_head, sw_tail), the region posted to
hardware. Since the page reuse strategy was added, a cleaned RX buffer
keeps its page (and its DMA mapping) in the ring for reuse, and refill
is batched: aq_ring_rx_fill() returns early until AQ_CFG_RX_REFILL_THRES
slots are free. Slots that were consumed but not yet reposted therefore
sit in the complementary [sw_tail, sw_head) gap with a live page, and
the deinit walk never visits them: up to a refill batch worth of pages
and DMA mappings leak on every interface down.
Walk the whole ring instead and release whatever is still there. Also
bail out if the buffer ring is already gone: a partial
aq_ptp_ring_alloc() failure frees the ring but leaves aq_nic set, so
aq_ptp_ring_deinit() still gets here on the unwind path.
Cc: stable@vger.kernel.org # v5.2+
Fixes: 46f4c29d9de6 ("net: aquantia: optimize rx performance by page reuse strategy")
Reviewed-by: Sukhdeep Singh <sukhdeeps@marvell.com>
Signed-off-by: Yangyu Chen <cyy@cyyself.name>
Acked-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/tencent_607CBA8237DA438E36B844318B21538DE008@qq.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 452636ea5410a96e02ebaaf80b21e3620b98e0dd upstream.
aq_vec_deinit() drains the TX rings with a single aq_ring_tx_clean()
call, which frees at most AQ_CFG_TX_CLEAN_BUDGET (256) descriptors and
stops at hw_head, which no longer moves once aq_vec_stop() has stopped
the hardware and NAPI. Completed descriptors beyond the budget and
everything still posted in [hw_head, sw_tail) keep their skb or
xdp_frame when the interface goes down: aq_vec_ring_free() then frees
the buffer ring and the references are lost for good.
Today this is a silent memory leak on every interface down under
TX/XDP_TX load. With the conversion of the RX path to page_pool posted
for net-next it becomes much more visible: XDP_TX frames carry fragment
references on the RX ring's page_pool, so a single stranded frame keeps
the pool's inflight count above zero forever. page_pool_destroy() then
never completes, the pool is leaked together with its pages, and
"page_pool_release_retry() stalled pool shutdown" is warned every 60
seconds from that point on, on every ifdown, XDP detach or ring resize
under XDP_TX load.
Bring back aq_ring_tx_deinit() as it was before the removal and use it
for teardown again, with one extension: TX rings can hold xdp_frames
nowadays, so release those too. They are returned with
xdp_return_frame() since this runs in process context.
Fixes: eb36bedf28be ("net: aquantia: remove function aq_ring_tx_deinit")
Cc: stable@vger.kernel.org # v4.11+
Reviewed-by: Sukhdeep Singh <sukhdeeps@marvell.com>
Signed-off-by: Yangyu Chen <cyy@cyyself.name>
Acked-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/tencent_EEDC35FAF2750A3A6A0B39BAE0E2C484860A@qq.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9e6869be49064915edb6c8776b27c376cfdb0df5 upstream.
A dibs device interrupt handler can be active after dibs_dev_del() and
may still access dmb_clientid_arr. (UAF)
In case of a failure in dibs_dev_add() being called by dibs_lo_dev_probe()
dmb_clientid_arr is freed twice (double free).
Free dmb_clientid_arr in dibs_dev_release() after last reference is gone.
Note that allocating in dibs_dev_add() instead of dibs_dev_alloc() is ok
for now, because no dmbs can be registered before dibs_dev_add().
Fixes: cc21191b584c ("dibs: Move data path to dibs layer")
Cc: stable@vger.kernel.org
Co-developed-by: Hidayath Khan <hidayath@linux.ibm.com>
Signed-off-by: Hidayath Khan <hidayath@linux.ibm.com>
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Dust Li <dust.li@linux.alibaba.com>
Link: https://patch.msgid.link/20260810111432.2334900-1-wintera@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f684c514f7965385dae21f2535f99938e73ec1af upstream.
MTK_GPHY_LED_TX_BLINK_SET and MTK_2P5GPHY_LED_TX_BLINK_SET are built
from the RX blink bits instead of the TX ones, so both TX masks are
identical to their RX counterparts. The TX bits they should be using,
MTK_PHY_LED_BLINK_{10,100,1000,2500}TX, are otherwise only referenced
by the per-speed branch of mtk_phy_led_hw_ctrl_set().
A TX trigger selected without a link trigger therefore programs the RX
blink bits, and the LED blinks on received traffic. The masks are also
used to decode the blink register in mtk_phy_led_hw_ctrl_get(), which
as a result cannot tell the two triggers apart: an RX-only
configuration reads back as RX and TX, and a TX-only configuration
reads back as neither.
Fixes: 7f9c320c98db ("net: phy: mediatek: Move LED helper functions into mtk phy lib")
Cc: stable@vger.kernel.org
Signed-off-by: Ahmed Naseef <naseefkm@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260804113511.3371248-1-naseefkm@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e033cbf3975a8465f879ebd5989dc35b04423a4d upstream.
bit_cursor() fetches the glyph under the cursor with
c = scr_readw(vc_pos);
src = vc_font.data + ((c & charmask) * w * height);
where charmask is 0x1ff when vc_hi_font_mask is set. The screen buffer
value comes directly from scr_readw() and may be larger than the current
font's glyph count.
Syzkaller triggers this via vcs_write(). The Call Trace shows
vcs_write() in vc_screen.c writing an arbitrary 16-bit value with
writev() to /dev/vcsa, which vcs_write_buf() in vc_screen.c stores via
vcs_scr_writew() without checking charcount. The stored value is later
read in bit_cursor() in bitblit.c.
When the font is changed from a font with 512 glyphs to a font with
256 glyphs, the screen buffer can retain characters with the high
bit set from the previous mode, which could also produce the same
out-of-bounds access.
BUG: KASAN: global-out-of-bounds in soft_cursor+0x378/0x6bc drivers/video/fbdev/core/softcursor.c:70
Read of size 16 at addr ffff800086c57970
Call Trace:
soft_cursor+0x378/0x6bc drivers/video/fbdev/core/softcursor.c:70
bit_cursor+0xa90/0x1108 drivers/video/fbdev/core/bitblit.c:365
fbcon_cursor+0x344/0x498 drivers/video/fbdev/core/fbcon.c:1427
hide_cursor+0xdc/0x2d0 drivers/tty/vt/vt.c:883
update_region+0x100/0x18c drivers/tty/vt/vt.c:669
vcs_write+0x8ec/0xaf0 drivers/tty/vt/vc_screen.c:685
bit_putcs_aligned() and bit_putcs_unaligned() already clamp the glyph
index to vc_font.charcount. Apply the same clamp in bit_cursor() after
extracting the attribute and masking, before indexing fontdata.
The fix completes the bounds checking started in commit 18c4ef4e765a
("fbdev: bitblit: bound-check glyph index in bit_putcs*"), which missed
the cursor path.
This change should be safe because the clamp reuses the existing
contract from fbcon: charcount is maintained under console_lock in
con_font_set() and fbcon_font_set(), and hi_font_mask is cleared when
switching from 512 to 256 glyphs. When stale screen data with high bits
remains after a font switch, or when vcs_write() stores an arbitrary
value, clamping the index to 0 prevents the out-of-bounds read without
changing cursor semantics — the same fallback bit_putcs uses.
Reported-by: syzbot+61b1db46218109869c14@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=61b1db46218109869c14
Link: https://lore.kernel.org/all/6a75205c.01d0871a.3a0d52.0032.GAE@google.com/
Fixes: 18c4ef4e765a ("fbdev: bitblit: bound-check glyph index in bit_putcs*")
Cc: stable@vger.kernel.org
Assisted-by: Hermes:muse-spark-1.2 syzkaller
Signed-off-by: Rik van Riel <riel@surriel.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4da94744707b27a3ae1197bdd7127da4505dc5b1 upstream.
V3D exposes several independent hardware queues (BIN, RENDER, TFU and
CSD) but has only a single, global reset. A timeout on any one queue
therefore has to stop, reset and restart the schedulers of every other
queue as well. That makes concurrent timeout handlers unsafe.
`reset_lock` was never able to make them safe, as a driver-side lock can
only cover the driver's &drm_sched_backend_ops.timedout_job callback.
The scheduler handles the timed out job and its pending list around that
callback, outside of the driver's control, so a global reset triggered
by one queue can still interfere with another queue that is in the
middle of handling a timeout of its own.
Consequently, if a reset happens in the CSD queue while a CL-intensive
application is running, the global reset stops and restarts the CL
queue's scheduler while that queue is handling a timeout of its own. As
drm_sched_stop() and drm_sched_start() subtract and add the credits of
every job sitting on the pending list of the scheduler they are called
on, and as the CL queue's handler concurrently takes its job off that
same list and puts it back, the stop and the start no longer see the
same set of jobs. The CL queue is left with more credits in flight than
its limit:
[ 327.302739] ------------[ cut here ]------------
[ 327.302744] WARNING: CPU: 2 PID: 43 at drivers/gpu/drm/scheduler/sched_main.c:102 drm_sched_run_job_work+0x238/0x4d0 [gpu_sched]
[ 327.302884] CPU: 2 UID: 0 PID: 43 Comm: kworker/u16:1 Not tainted 6.18.39-v8-16k+ #3 PREEMPT
[ 327.302889] Hardware name: Raspberry Pi 5 Model B Rev 1.0 (DT)
[ 327.302893] Workqueue: v3d_bin drm_sched_run_job_work [gpu_sched]
[ 327.302984] Call trace:
[ 327.302987] drm_sched_run_job_work+0x238/0x4d0 [gpu_sched] (P)
[ 327.302997] process_scheduled_works+0x180/0x3d0
[ 327.303010] worker_thread+0x268/0x3e8
[ 327.303016] kthread+0x140/0x250
[ 327.303022] ret_from_fork+0x10/0x20
[ 327.303031] ---[ end trace 0000000000000000 ]---
From that point on, the credit count of the CL queue is broken, causing
a complete GPU hang and UI freeze.
The DRM scheduler already provides a mechanism to serialize the timeout
handlers of different schedulers: an ordered workqueue passed as
drm_sched_init()'s @timeout_wq parameter. By default, each scheduler
queues its timeout work on the system workqueue, which runs the handlers
concurrently. Give all of the queues a shared ordered workqueue instead,
as recommended by the DRM scheduler documentation for hardware that has
distinct queues but resets globally.
Cc: stable@vger.kernel.org # 6.15
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patch.msgid.link/20260728-v3d-order-global-reset-v1-1-e47be838158d@igalia.com
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2fae94ee14f7fea11d3f95e10383a87c01d21518 upstream.
The 'ctx_idr' is initialized but never destroyed when
the channel context is freed, leading to a memory leak.
Add idr_destroy() to properly clean up the IDR resources.
Fixes: f6f9279f2bf0 ("misc: fastrpc: Add Qualcomm fastrpc basic driver model")
Cc: stable@vger.kernel.org
Signed-off-by: Eddie Lin <eddie.lin@oss.qualcomm.com>
Reviewed-by: Ekansh Gupta <ekansh.gupta@oss.qualcomm.com>
Signed-off-by: Srinivas Kandagatla <srini@kernel.org>
Link: https://patch.msgid.link/20260724223342.629168-6-srini@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b85a0e91d7d6cd06a53c881a46f749cfcef416a2 upstream.
When an invoke is interrupted by a signal,
wait_for_completion_interruptible() returns -ERESTARTSYS and
fastrpc_internal_invoke() moves every buffer from fl->mmaps onto
cctx->invoke_interrupted_mmaps. This list_del()/list_add_tail() walk
runs without holding fl->lock, the lock that serialises fl->mmaps in
fastrpc_req_mmap() and fastrpc_req_munmap() everywhere else.
Take fl->lock around the move, matching every other fl->mmaps accessor.
Fixes: 76e8e4ace1ed ("misc: fastrpc: Safekeep mmaps on interrupted invoke")
Reported-by: Yuhao Jiang <danisjiang@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Junrui Luo <moonafterrain@outlook.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Srinivas Kandagatla <srini@kernel.org>
Link: https://patch.msgid.link/20260724223342.629168-4-srini@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6102ceb4eab845743ee57acd3863fbd06e93c927 upstream.
fastrpc_req_munmap_impl() is called to unmap any buffer. The buffer is
getting removed from the list after it is unmapped from DSP. This can
create potential race conditions if multiple threads invoke unmap
concurrently, where one thread may remove the entry from the list while
another thread's unmap operation is still ongoing.
Fix this by removing the buffer entry from the list before calling the
unmap operation. If the unmap fails, the entry is re-added to the list
so that userspace can retry the unmap, or alternatively, the buffer
will be cleaned up during device release when the DSP process is torn
down and all DSP-side mappings are freed along with remaining buffers
in the list.
Fixes: 2419e55e532de ("misc: fastrpc: add mmap/unmap support")
Cc: stable@kernel.org
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Ekansh Gupta <ekansh.gupta@oss.qualcomm.com>
Signed-off-by: Jianping Li <jianping.li@oss.qualcomm.com>
Signed-off-by: Srinivas Kandagatla <srini@kernel.org>
Link: https://patch.msgid.link/20260724223342.629168-3-srini@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 310f7868399668c6d99d88acc9c4cf3462e69d5b upstream.
fastrpc_channel_ctx_get() is called in fastrpc_device_open() before
fastrpc_session_alloc(). If session alloc fails, the error path
returns -EBUSY without calling fastrpc_channel_ctx_put(), leaking
the reference. Fix by adding the missing put.
Fixes: 278d56f970ae ("misc: fastrpc: Reference count channel context")
Cc: stable@kernel.org
Signed-off-by: Anandu Krishnan E <anandu.e@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Srinivas Kandagatla <srini@kernel.org>
Link: https://patch.msgid.link/20260724223342.629168-5-srini@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ab99eaafb0c4b412cfeb895a8cf091626e2bbd86 upstream.
The initial buffer allocated for the Audio PD memory pool is never added
to the pool because pageslen is set to 0. As a result, the buffer is not
registered with Audio PD and is never used, causing a memory leak. Audio
PD immediately falls back to allocating memory from the remote heap since
the pool starts out empty.
Fix this by setting pageslen to 1 so that the initially allocated buffer
is correctly registered and becomes part of the Audio PD memory pool.
Fixes: 0871561055e66 ("misc: fastrpc: Add support for audiopd")
Cc: stable@kernel.org
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Ekansh Gupta <ekansh.gupta@oss.qualcomm.com>
Signed-off-by: Jianping Li <jianping.li@oss.qualcomm.com>
Signed-off-by: Srinivas Kandagatla <srini@kernel.org>
Link: https://patch.msgid.link/20260724223342.629168-2-srini@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6829665d050983907b560173e49dcc6c11cb2730 upstream.
rtw_cfg80211_monitor_if_xmit_entry() removes the radiotap header and
then reads the 802.11 frame control field without checking that a base
802.11 header remains.
The data path also pulls the calculated 802.11, QoS and SNAP header
span before confirming that the skb contains it. A truncated frame can
therefore cause out-of-bounds reads or leave insufficient data for the
Ethernet address writes.
Reject frames that do not contain the base 802.11 header and data
frames that do not contain their complete calculated header span.
Fixes: 554c0a3abf21 ("staging: Add rtl8723bs sdio wifi driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Mariano Baragiola <mbaragiola@linux.com>
Link: https://patch.msgid.link/20260727160859.1917096-1-mbaragiola@linux.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2c56ef658ac8c6bca36bc5574715e8f717207c6c upstream.
The WEP shared-key authentication handler uses the challenge-text
element's attacker-controlled length without checking it against the
fixed 128-byte chg_txt buffer.
In OnAuthClient() the length from rtw_get_ie() - up to 255 - is used
to perform memcpy() into the 128-byte pmlmeinfo->chg_txt, so a
malicious AP sending a malformed WLAN_EID_CHALLENGE element can
overflow/underfill chg_txt by up to 127 bytes. It is reachable over the
air, before association, during shared-key authentication. In the case
of an overflow, the driver can write out of bounds. In the case of an
underfill, the driver can echo stale buffer memory.
The challenge text is defined to be exactly 128 octets, which is
already provided as the WLAN_AUTH_CHALLENGE_LEN define; require the
element to be exactly that length before use.
Fixes: 554c0a3abf21 ("staging: Add rtl8723bs sdio wifi driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Panagiotis Petrakopoulos <npetrakopoulos2003@gmail.com>
Link: https://patch.msgid.link/20260720082409.168379-1-npetrakopoulos2003@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ae21407350151bddfd4fea7aa39bd0643c0ca9d3 upstream.
WMM_param_handler() copies a fixed-size WMM parameter element out of a
received information element without checking that the element is long
enough, causing an out-of-bounds read for a short WMM IE.
The handler reads sizeof(struct WMM_para_element) (18) bytes at
pIE->data + 6, so it requires pIE->length to be at least 24
(WLAN_WMM_LEN), but it never validates the length. Two of its three
callers reach it after matching only the WMM OUI: OnAssocRsp() in
rtw_mlme_ext.c matches a 6-byte OUI, and join_cmd_hdl() matches a
4-byte OUI, before calling the handler. A vendor-specific IE carrying
the WMM OUI but a length between 6 and 23, placed in an association
response or in the IE blob handed to join_cmd_hdl(), passes the OUI
check and then makes the memcmp() and memcpy() at pIE->data + 6 read
past the end of the element. OnAssocRsp() parses a frame received from
the AP, so this is reachable from a remote peer.
The remaining caller in rtw_wlan_util.c already guards the handler with
"pIE->length == WLAN_WMM_LEN". Move the equivalent check into the
handler itself so every caller is covered; the sibling IE handlers in
the same parsing loop (HT_caps_handler(), HT_info_handler(),
ERP_IE_handler()) likewise bound their accesses by pIE->length.
Fixes: 554c0a3abf21 ("staging: Add rtl8723bs sdio wifi driver")
Cc: stable@vger.kernel.org
Signed-off-by: Muhammad Bilal <meatuni001@gmail.com>
Link: https://patch.msgid.link/20260719041509.97894-1-meatuni001@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1c3e23e78862493e8cf1adad02b10ffcb8b9921c upstream.
rtw_get_wpa_ie() reads bytes at fixed offsets into a vendor-specific
information element without checking that the element is long enough,
causing an out-of-bounds read for a short trailing IE.
The function locates a vendor-specific IE (EID 221) with rtw_get_ie()
and then compares a 4-byte OUI+type at pbuf + 2 and reads a 2-byte
version word at pbuf + 6. Those accesses require the IE body to be at
least 6 bytes, but rtw_get_ie() only guarantees that the element fits
within the buffer; it does not enforce a minimum body length. A
vendor-specific IE whose length byte is 0 to 5, placed at the end of
the buffer, therefore makes these reads run past the end of the IE and
past the end of the buffer itself.
The buffer holds information elements taken from received management
frames and from the IE blob passed to rtw_cfg80211_set_wpa_ie(), which
is kmemdup'd to its exact length, so the read can run off the end of
the allocation.
The sibling helpers rtw_get_sec_ie(), rtw_get_wapi_ie() and
rtw_get_wps_ie() in this file already reject too-short vendor-specific
IEs before their OUI memcmp(); rtw_get_wpa_ie() was never brought in
line with them, and needs a minimum of 6 rather than 4 bytes because
of the version word. Add the missing length check.
Fixes: 554c0a3abf216 ("staging: Add rtl8723bs sdio wifi driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Muhammad Bilal <meatuni001@gmail.com>
Link: https://patch.msgid.link/20260719030631.88254-1-meatuni001@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 440915499231e9db1c361aa45bb702e8fd3b4a32 upstream.
dmaengine_terminate_all() does not wait for a running callback, so the TX
callback can still touch the TX buffer after it is freed. The RX poll
timer reads the RX buffers without the port lock.
Switch to dmaengine_terminate_sync() and delete the RX timer before
freeing the buffers.
Fixes: ead76f329f77 ("ARM: 6763/1: pl011: add optional RX DMA to PL011 v2")
Cc: stable <stable@kernel.org>
Assisted-by: Codex:gpt-5.6
Signed-off-by: Fan Wu <fanwu01@zju.edu.cn>
Link: https://patch.msgid.link/20260731085915.326775-4-fanwu01@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 36672c8d7d14e9c43287528455d2c97b526ea6ad upstream.
The RS485 trigger hrtimers are embedded in the devm-managed port and can
fire after it is freed. The IRQ handler can arm a timer, so free the IRQ
first and then cancel both timers.
Complete the RS485 stop without arming a timer, and cancel the timers
in remove() for the suspend-then-unbind path, where shutdown is not
called.
This issue was found by an in-house static analysis tool.
Fixes: 2c1fd53af21b ("serial: amba-pl011: Fix RTS handling in RS485 mode")
Cc: stable <stable@kernel.org>
Assisted-by: Codex:gpt-5.6
Signed-off-by: Fan Wu <fanwu01@zju.edu.cn>
Link: https://patch.msgid.link/20260731085915.326775-3-fanwu01@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit dcb2f7576ce460eb4f6b9048b7c266c8da5848a8 upstream.
The RS485 stop hrtimer is used both to drain the transmitter and to wait
out delay_rts_after_send. The callback cannot tell the two apart, so it
restarts the post-send delay on every expiry and the timer never stops.
Add a WAIT_AFTER_SEND_DELAY state so its expiry ends the stop sequence
instead of restarting the delay.
Fixes: 2c1fd53af21b ("serial: amba-pl011: Fix RTS handling in RS485 mode")
Cc: stable <stable@kernel.org>
Assisted-by: Codex:gpt-5.6
Signed-off-by: Fan Wu <fanwu01@zju.edu.cn>
Link: https://patch.msgid.link/20260731085915.326775-2-fanwu01@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1423415471274abda87024967d7fe2206ceee0ea upstream.
The NXP LPC32xx UART (PORT_LPC3220) can latch an RX character-timeout
interrupt while the RX FIFO is empty: IIR reports UART_IIR_RX_TIMEOUT
(0x0c) but LSR.DR is clear. A character timeout is only cleared by
reading RHR, but serial8250_rx_chars() reads RHR only when LSR.DR is
set, so nothing ever clears the condition. The interrupt is
level-triggered and re-fires immediately, so on a single-core ARM926
the resulting interrupt storm livelocks the CPU.
It is reproducible when userspace repeatedly opens the front-panel port
(ttyS1): serial8250_do_set_termios() re-enables interrupts on unlock and
the handler then spins forever with iir=0xcc lsr=0x60 ier=0x05, tripping
the soft-lockup detector in serial8250_handle_irq_locked().
LPC32xx has no dedicated 8250 glue driver, it's driven by the generic
8250_of. Add a hardware specific handle_irq for PORT_LPC3220, wired up
in of_platform_serial_setup() the same way fsl8250_handle_irq is
installed. The handler follows dw8250_handle_irq(): on an RX timeout
with an empty FIFO (LSR.DR and LSR.BI clear) it does one throwaway RHR
read to clear the condition, then calls serial8250_handle_irq_locked().
No real received data is ever discarded, and it is a no-op on healthy
UARTs which never report a timeout with DR clear.
This is the same class of bug already worked around in other 8250 drivers;
see commit 424d79183af0 ("serial: 8250_dw: Avoid "too much work" from bogus rx timeout interrupt")
which reports the identical iir=0xcc/lsr=0x60. See also
UART_RX_TIMEOUT_QUIRK in 8250_omap, and the note in 8250_bcm7271.
Cc: stable <stable@kernel.org>
Assisted-by: Claude:Opus4.8
Signed-off-by: Ryan Wilbur <rwilbur633@gmail.com>
Link: https://patch.msgid.link/20260730193920.28954-1-rwilbur633@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e2fe6a0efecbef00e3ecc2db64dd5afa8c212b41 upstream.
serial8250_release_dma() terminates RX DMA and releases the channel, but
leaves rx_running set. If the port is closed while an RX transfer is
active, the stale state remains while rxchan is NULL until the channel is
requested again on the next open.
The DesignWare BUSY workaround added by commit a7b9ce39fbe4
("serial: 8250_dw: Ensure BUSY is deasserted") calls
serial8250_rx_dma_flush() from the LCR write path during startup. This
happens before serial8250_request_dma() obtains a new RX channel. On
reopen, the stale rx_running state therefore makes the flush path pass a
NULL channel to dmaengine_pause(), causing a kernel Oops.
Clear rx_running after terminating RX DMA, matching the TX cleanup. Also
make the flush helper return if the DMA object or RX channel is not
available so startup and teardown paths cannot pass a NULL channel to the
DMAengine API.
Fixes: 0fcb7901f9d6 ("tty: serial: 8250_dma: keep own book keeping about RX transfers")
Cc: stable <stable@kernel.org>
Signed-off-by: Cunhao Lu <1579567540@qq.com>
Link: https://patch.msgid.link/tencent_9EE2945F4C933B4D810C73C2D7485E000F06@qq.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e3c04834ae1ab5e9cfbe8ac54ec734aa4774249d upstream.
When transmit flushing a qcom-geni UART during an ongoing TX DMA, the
UART gets stuck infinitely repeating corrupted TX DMA frames.
The DMA-mode uart_ops does not provide a flush_buffer callback, so an
in-flight transfer can complete after serial core has reset the transmit
kfifo, underflowing its length and resubmitting page-sized transfers
indefinitely. Add one that stops the transfer and clears tx_remaining
and tx_queued.
The stop path was also broken: it unmapped the buffer while the serial
engine could still read it, and never reset the TX DMA state machine.
Cancel the main sequencer command first, then reset the state machine
and wait for it before unmapping. Drop the early return so a pending
mapping is also cleaned up when the main command is inactive.
The bug can be triggered from userspace with a large write immediately
followed by TCOFLUSH. A following tcdrain will hang forever. The bug was
reproduced and this fix was validated on Arduino Uno Q (QRB2210)
using /dev/ttyHS1.
Assisted-by: Claude:claude-5-opus Codex:gpt-5
Signed-off-by: Jan Sebastian Götte <linux@jaseg.de>
Fixes: 2aaa43c70778 ("tty: serial: qcom-geni-serial: add support for serial engine DMA")
Cc: stable <stable@kernel.org>
Reviewed-by: Praveen Talari <praveen.talari@oss.qualcomm.com>
Link: https://patch.msgid.link/20260729174105.21838-2-git@jaseg.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit dd7aea9ee2091cfae3a5e376af87aa106d7735cd upstream.
The get_current_thread() method is currently called for every ioctl to
ensure that a Thread struct exists for the thread calling into the
driver. However, not all ioctls require a Thread object, so this means
we are unnecessarily creating these objects in cases where we don't need
to. If said thread does not invoke BINDER_THREAD_EXIT on exit, Binder's
Thread struct stays around until the fd is closed. For long-lived
processes the Thread object is effectively leaked.
Furthermore, when the BINDER_GET_NODE_DEBUG_INFO ioctl is invoked by
libmemunreachable to ensure that objects reachable only through the
Binder driver are not considered leaked, this is done from a fork of the
process owning the fd, which means that it fails the group_leader check
inside get_current_thread(). This results in EINVAL errors for this
ioctl, causing libmemunreachable to report a false positive memory leak.
Thus, do not invoke get_current_thread() for ioctls that do not require
it.
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Cc: stable <stable@kernel.org>
Fixes: eafedbc7c050 ("rust_binder: add Rust Binder driver")
Acked-by: Carlos Llamas <cmllamas@google.com>
Link: https://patch.msgid.link/20260727-binder-cur-thread-v1-1-8edf2b64e235@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b5be879519291f139fa7b365fd0dbc84710e4919 upstream.
Current implementation isn't working well when device tree nodes have a
phandle on a fixed-layout nvmem node. As the fixed layout is handled in
nvmem core, no driver is ever associated with the layout, and the device
consumer driver probe is deferred indefinitely.
Remove the specific handling of fixed-layout and add a layout driver.
This makes the fixed-layout similar to all other layouts, fixing the
whole issue.
Fixes: fc29fd821d9a ("nvmem: core: Rework layouts to become regular devices")
Cc: stable@vger.kernel.org
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Signed-off-by: Srinivas Kandagatla <srini@kernel.org>
Link: https://patch.msgid.link/20260724223404.629248-3-srini@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ff10b6db0ab75b132aed69ab144ac04f63ef9bdb upstream.
The Apple SPMI NVMEM driver previously cast regmap_bulk_read/write to
void * when assigning them to nvmem_config's reg_read/reg_write
function pointers.
This cast breaks the expected function signature of nvmem_reg_read_t
and nvmem_reg_write_t. With CFI enabled, indirect calls through
these pointers fail:
CFI failure at nvmem_reg_write+0x194/0x1e4 (target: regmap_bulk_write+0x0/0x2c8; expected type: 0x83a189c3)
...
Call trace:
nvmem_reg_write+0x194/0x1e4 (P)
__nvmem_cell_entry_write+0x298/0x2e8
nvmem_cell_write+0x24/0x34
macsmc_reboot_probe+0x1dc/0x454 [macsmc_reboot]
...
Introduce thin wrapper functions with the correct nvmem function
pointer types to satisfy the CFI checks.
Fixes: fe91c24a551c ("nvmem: Add apple-spmi-nvmem driver")
Signed-off-by: Aelin Reidel <aelin@mainlining.org>
Reported-by: Clayton Craft <craftyguy@postmarketos.org>
Tested-by: Clayton Craft <craftyguy@postmarketos.org>
Reviewed-by: Sven Peter <sven@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Srinivas Kandagatla <srini@kernel.org>
Link: https://patch.msgid.link/20260724223404.629248-2-srini@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b0495bb58af06a7de4628c72d500e3d5e180d808 upstream.
The read buffer allocation was changed from kmalloc() to kvmalloc().
This buffer is part of mei_cl_cb structure that can be queued in
rd_complete queue protected by spinlock.
Releasing the structure leads to errors like below when freeing buffer
that allocated non-contiguous:
BUG: sleeping function called from invalid context at mm/vmalloc.c:3448
Separate mei_cl_cb structure dequeue and release to
perform only dequeue under spinlock and push release out of spinlock.
Cc: stable <stable@kernel.org>
Fixes: 4adf613e01bf ("mei: use kvmalloc for read buffer")
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/work_items/16359
Reviewed-by: Menachem Adin <menachem.adin@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Link: https://patch.msgid.link/20260719-kvfree_out_of_spinlock-v1-1-e07d6333bea7@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit bc597f0cc44f0b173c50ee986a047219cd559ee9 ]
Add the vendor/product ID (0x37ad, 0x0600) to usb_device_id table
for Realtek 8761BUV.
The device info from /sys/kernel/debug/usb/devices as below.
T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 4 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=37ad ProdID=0600 Rev= 2.00
S: Manufacturer=
S: Product=TP-Link Bluetooth USB Adapter
S: SerialNumber=ACA7F14FD2A5
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
Signed-off-by: Nils Helmig <nils.helmig@web.de>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5ead2063611ae56809b1b113ac44cef9547c81d7 ]
RTL8761B and RTL8761BU devices report HCI version 5.1 but do not
support the LE Extended Scan commands. This causes repeated failures
with Opcode 0x2042 (LE Set Extended Scan Parameters) returning -EBUSY
when BlueZ attempts extended scanning while a connection is active.
Set HCI_QUIRK_BROKEN_EXT_SCAN for CHIP_ID_8761B to make BlueZ fall
back to legacy LE scan commands which the firmware supports correctly.
Tested with RTL8761BU (USB ID 0bda:a728) where the issue manifested
as continuous 'Opcode 0x2042 failed: -16' errors in dmesg whenever
a BLE connection was active.
Signed-off-by: Alexej Sidorenko <alexej@sidorenko.cz>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
In the 6.12 and 6.18 stable trees, when an unmapped range covers a
whole page table, intel_iommu_unmap() can free that table before the
range has been invalidated. The freed table goes on gather->freelist
before the range is added to the gather. If
iommu_iotlb_gather_add_page() syncs before adding it, that sync
flushes only the earlier ranges but frees the whole freelist, that
table included. The range itself is flushed later with an empty
freelist, which means the flush is sent with the invalidation hint set
and the IOMMU may keep its paging-structure cache entry for the freed
table. DMA to the next mapping at that IOVA is then translated through
whatever the freed page holds by then, which is usually a silent wrong
translation and sometimes a DMAR fault.
Under a userspace driver that maps and unmaps DMA buffers through VFIO
type1 continuously, this shows up as wrong data in device reads and
writes. An occasional DMAR fault on a mapped IOVA is the only thing in
the logs. With an Intel DSA engine assigned through vfio-pci, remapping
a 16 MiB buffer at a fixed IOVA and reading it through the device
returned data from the wrong pages in 280 of 400 iterations. With a
fresh IOVA per iteration it never did.
Add the range to the gather first and splice the freed tables into
gather->freelist afterwards, so that they are only freed by a sync that
also invalidates their range.
Mainline removed this code in v6.19 with commit d373449d8e97
("iommu/vt-d: Use the generic iommu page table") and is not affected.
Fixes: 2a2b8eaa5b25 ("iommu: Handle freelists when using deferred flushing in iommu drivers")
Cc: stable@vger.kernel.org # 6.12.y, 6.18.y
Reported-by: Mohammed Almaroof <moh@anthropic.com>
Reviewed-by: Ben Cressey <ben@cressey.dev>
Assisted-by: Claude:unspecified
Signed-off-by: Jose Fernandez (Anthropic) <jose.fernandez@linux.dev>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
This reverts commit 490ceacd2162de919a142bcb4eff363bb493b1de.
This patch is apparently missing a dependency from 7.2 as users have not
reported any regressions with 7.2-rc, but there are regressions on 6.18.
The regression manifests as inconsistent lower brightness at the top end
(e.g., around 98%).
Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/5562
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Thorsten Leemhuis <regressions@leemhuis.info>
Cc: Sergio Callegari <sergio.callegari@gmail.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit b0ce5fd9fabe7c79463cf4602217d4dfeff5b1fd upstream.
__igc_resume() calls netif_device_attach() only inside the
netif_running() branch, so an interface that was down during suspend
is never re-attached on resume. It then stays in the not-present state
that __igc_shutdown() set via netif_device_detach(): ethtool reports
ENODEV and every attempt to bring the interface up fails the
netif_device_present() check in __dev_open() with -ENODEV, silently,
since __igc_resume() returns 0. Only reloading the driver recovers the
device.
This is easy to hit in practice because NetworkManager brings managed
interfaces down before sleep unless Wake-on-LAN is configured, making
the adapter unusable after every suspend/resume cycle with WoL
disabled.
Re-attach the netdev on every successful resume, as igb and e1000e do.
Fixes: 6f31d6b643a3 ("igc: Refactor runtime power management flow")
Cc: stable@vger.kernel.org
Signed-off-by: Philipp David <pd-lkml@3b.pm>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Dima Ruinskiy <dima.ruinskiy@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20260804222205.1580328-11-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7e2d693af0d4c05bddccb3541a0aabd69f4cb244 upstream.
In function otx2_get_egress_burst_cfg, when the parameter `burst` is
255 and the max mantissa is 255 (0xFFULL), `burst_exp` is set to
`ilog2(255) - 1`, which equals 6.
This results in an unsigned wrap-around when calculating
`(1ULL << (*burst_exp - 7))`, since `*burst_exp - 7` becomes -1,
which makes the shift operand 0xFFFFFFFF. This value is greater than
the width of the left operand.
According to standard 6.5.7 p.3:
"The type of the result is that of the promoted left operand.
If the value of the right operand is negative or is greater than
or equal to the width of the promoted left operand, the behavior
is undefined."
Fix the off-by-one boundary condition.
Add a WARN_ON(*burst_exp < 7) before the else branch as an
explicit safeguard. This ensures that if max_mantissa ever changes
in a way that reintroduces this condition, it will be immediately
caught at runtime rather than silently triggering UB.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: e638a83f167e ("octeontx2-pf: TC_MATCHALL egress ratelimiting offload")
Signed-off-by: Sergey V. Frolov <Sergey.V.Frolov@kaspersky.com>
Cc: stable@vger.kernel.org
Reviewed-by: Ratheesh Kannoth <rkannoth@marvell.com>
Reviewed-by: Sunil Goutham <sgoutham@marvell.com>
Link: https://patch.msgid.link/20260804120446.1955448-1-Sergey.V.Frolov@kaspersky.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 90f305f2c7a30257c683e13f4bf7c798eea992a0 upstream.
In evdev_pass_values(), the input_event structure is allocated on the
kernel stack and populated field-by-field. However, it is never fully
initialized. On architectures where struct input_event contains explicit
or implicit padding (such as the 32-bit __pad field on SPARC64), these
padding bytes are left uninitialized.
When this event structure is subsequently passed to the client buffer
and later copied to userspace, the uninitialized padding bytes leak
kernel stack memory, potentially exposing sensitive information.
Similar issues exist in __evdev_queue_syn_dropped and __pass_event.
Fix this by explicitly zeroing the entire event structure with memset()
before populating its fields. This ensures all padding bytes are cleared
before the data crosses the security boundary.
Reported-by: sashiko-bot@kernel.org
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/ampGGKo4UMKru6f5@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e25d47a526939ad44b75f778b8a7500562b84fc1 upstream.
kbd_keycode() reads vc->port.tty without acquiring a tty reference,
racing against con_shutdown() which clears port.tty under a different
lock. Use tty_port_tty_get()/tty_kref_put() to hold a proper reference
for the duration the tty pointer is needed.
Assisted-by: AISLE:Snapshot
Signed-off-by: Joshua Rogers <linux@joshua.hu>
Cc: stable <stable@kernel.org>
Link: https://patch.msgid.link/20260731-tty-vt-stuff-v1-1-be99b9da8e30@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a7ad0034453ba4c353f9b8f810ee2569de33d283 upstream.
KDSKBMETA modifies keyboard meta mode but lacks the !perm check that all
other keyboard setter ioctls in vt_k_ioctl() enforce, allowing a process
to change meta mode on a non-controlling console without authorization.
Assisted-by: AISLE:Snapshot
Cc: stable <stable@kernel.org>
Signed-off-by: Joshua Rogers <linux@joshua.hu>
Link: https://patch.msgid.link/20260731-tty-vt-stuff-v1-2-be99b9da8e30@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit fde39b8a521780391fb4e5bda2c0aa4928947f12 upstream.
ipheth_sndbulk_callback() re-arms the carrier-check work on any
non-zero URB status:
else
schedule_delayed_work(&dev->carrier_work, 0);
Nothing ties that to the interface being up, so the work can be armed
again after ipheth_close() has already drained it, and stay armed
until the netdev whose private area embeds it is freed.
On unplug with a TX URB in flight, ipheth_disconnect() drains the work
through unregister_netdev() -> ipheth_close() ->
cancel_delayed_work_sync() and only then calls ipheth_kill_urbs().
usb_kill_urb() completes the in-flight TX URB with -ENOENT, so
ipheth_sndbulk_callback() runs after the drain and re-arms
carrier_work.
The same completion also re-arms the work if the interface is only
brought down while a TX URB is in flight, and
ipheth_carrier_check_work() then keeps re-queueing itself once a
second. unregister_netdev() does not call ipheth_close() for an
already-down interface, so nothing drains it on the later unplug
either.
In both cases free_netdev() frees the netdev while carrier_work is
still pending, and ipheth_carrier_check_work() dereferences freed
memory.
Tie the work to the interface state instead of chasing the completion:
disable it in ipheth_close() and enable it in ipheth_open(), so a
schedule_delayed_work() from the URB completion is a no-op whenever
the interface is not up. disable_delayed_work_sync() also waits for a
running instance, so it fully replaces the cancel_delayed_work_sync()
it takes the place of. The work starts out disabled in ipheth_probe()
so the enable/disable counts balance from the first open.
Reproduced under KASAN on linux-next (next-20260731) with dummy_hcd and
raw-gadget standing in for the device, driving the second path above (the
interface is already down, so unregister_netdev() does not call
ipheth_close()): 15 of 15 unpatched boots report a slab-use-after-free in
__run_timers(), freed by ipheth_disconnect() and re-armed from
ipheth_sndbulk_callback() via queue_delayed_work_on(). The
same trigger on a kernel differing only by this patch reports 0 of 15,
and the carrier check still functions across open/close cycles.
The reproducer needs an attached USB device that stops draining bulk OUT,
plus a link down and unplug, driven as root. It is not a privilege
boundary crossing and no exploit primitive was developed.
Found by 0sec (https://0sec.ai).
Fixes: bb1b40c7cb86 ("usbnet: ipheth: prevent TX queue timeouts when device not ready")
Cc: stable@vger.kernel.org
Signed-off-by: Doruk Tan Ozturk <doruk@0sec.ai>
Link: https://patch.msgid.link/20260802120602.42595-1-doruk@0sec.ai
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1f428e30947395d9b9aacee03e25a4e6cfcad7a4 upstream.
When the interface has NETIF_F_SG enabled and skb_linearize() fails in
ax88179_tx_fixup(), the function returns NULL without freeing the skb.
usbnet_start_xmit() treats a NULL return from tx_fixup() as a drop
(info->flags does not set FLAG_MULTI_PACKET for this driver), jumping
to the "drop" label where it does `if (skb) dev_kfree_skb_any(skb)`.
Because tx_fixup() returned NULL, the local skb variable in
usbnet_start_xmit() is NULL, so the original skb is never freed — a
memory leak on every TX frame whose linearization fails (i.e. under
memory pressure).
Free the skb before returning, matching the error handling already used
for the pskb_expand_head() failure path in the same function.
Fixes: 16b1c4e01c89 ("net: usb: ax88179_178a: add TSO feature")
Cc: stable@vger.kernel.org
Signed-off-by: Yi Cong <yicong@kylinos.cn>
Link: https://patch.msgid.link/20260729030436.3420477-1-cong.yi@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6b1c8a9403a26cb0fed7a648916c74dc236da591 upstream.
The variable ndp_index is declared as a signed integer, but it stores
the return value of get_ncm(), which is unsigned.
A malicious host can supply a large offset that overflows the signed
ndp_index, making it negative. Because ndp_index is compared against
unsigned bounds, this negative value bypasses sanity checks and leads
to an out-of-bounds read when calculating the address of the NDP
block (ntb_ptr + ndp_index).
Fix this by changing ndp_index to unsigned int to ensure consistent
unsigned comparisons throughout the function.
Fixes: 370af734dfaf ("usb: gadget: NCM: RX function support multiple NDPs")
Cc: stable <stable@kernel.org>
Signed-off-by: Sonali Pradhan <sonalipradhan@google.com>
Link: https://patch.msgid.link/20260720165654.2224591-1-sonalipradhan@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 50b303f3d0f7de543ee90d50879970783d06da33 upstream.
readl() already returns a CPU-endian value. Passing its return value to
le32_to_cpu() is therefore redundant and causes an incorrect double byte
swap on big-endian systems.
Similarly, writel() expects a CPU-endian value, so passing the result of
cpu_to_le32() is incorrect.
Remove the unnecessary conversions and operate on the MMIO register value
as a CPU-endian u32.
Fixes: 241e2ce88e5a ("usb: cdnsp: Fix issue with resuming from L1")
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Cc: stable <stable@kernel.org>
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260720-endian-fix-v1-v1-1-b5681fa1ea9f@cadence.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e48844ece5e3ed1d1eb865f6da2b16f62cd9f86d upstream.
The ICM USB4 switch operation request encodes two values in
request.data_len_valid: bit 4 marks the data payload valid, while bits
3:0 hold the payload length in dwords. A zero length with the valid bit
set represents the full 16-dword data array.
icm_usb4_switch_op() sets the valid bit when a transmit payload is
present. For payloads shorter than the full 16 dwords, it then assigns
the length to the whole field and clears the valid bit that was just set.
The payload is still copied into the request, but the descriptor sent to
firmware marks that data as invalid.
This affects USB4 router operations that send short payloads through the
firmware connection manager. In particular, USB4 NVM writes can send a
short final block when the image size is not aligned to the 64-byte proxy
payload size. Firmware may then ignore or reject that final block, while
full 16-dword blocks are unaffected because they are encoded as length 0
with the valid bit set.
OR the short payload length into data_len_valid so the valid bit is
preserved.
Fixes: 9039387e166e ("thunderbolt: Add USB4 router operation proxy for firmware connection manager")
Cc: stable@vger.kernel.org
Signed-off-by: Xu Rao <raoxu@uniontech.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c2f811314be351d86b6ab41e9297ae80d8da6f86 upstream.
If cxacru_cm() encounters an error while submitting or waiting for snd_urb,
it aborts and returns the error without killing the already submitted
rcv_urb. This leaves the rcv_urb active.
When this happens during initialization (e.g., in cxacru_atm_start()), the
driver may ignore the error and proceed to call cxacru_poll_status(), which
invokes cxacru_cm() again. Attempting to submit the still-active rcv_urb
triggers a warning in usb_submit_urb():
cxacru 1-1:1.0: send of cm 0x84 failed (-104)
ATM dev 0: cxacru_atm_start: CHIP_ADSL_LINE_START returned -104
------------[ cut here ]------------
URB ffff88812658d200 submitted while active
WARNING: drivers/usb/core/urb.c:379 at usb_submit_urb+0x79/0x18b0
drivers/usb/core/urb.c:379
...
Call Trace:
<TASK>
cxacru_cm+0x21a/0xf10 drivers/usb/atm/cxacru.c:631
cxacru_cm_get_array drivers/usb/atm/cxacru.c:722 [inline]
cxacru_poll_status+0x178/0x1110 drivers/usb/atm/cxacru.c:828
cxacru_atm_start+0x185/0x360 drivers/usb/atm/cxacru.c:814
usbatm_atm_init+0x144/0x3a0 drivers/usb/atm/usbatm.c:927
usbatm_usb_probe+0x15cb/0x1db0 drivers/usb/atm/usbatm.c:1178
cxacru_usb_probe+0x17f/0x220 drivers/usb/atm/cxacru.c:1370
...
To fix this, ensure that rcv_urb is properly killed if cxacru_cm() aborts
early. We can safely call usb_kill_urb() on rcv_urb in the error path, as
it is safe to call even if the URB is not active (e.g., if it failed to
submit in the first place, or if it already completed).
Fixes: 1b0e61465234 ("[PATCH] USB ATM: driver for the Conexant AccessRunner chipset cxacru")
Cc: stable <stable@kernel.org>
Assisted-by: Gemini:gemini-3.5-flash Gemini:gemini-3.1-pro-preview syzbot
Reported-by: syzbot+c9dff578c3a41775176a@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=c9dff578c3a41775176a
Link: https://syzkaller.appspot.com/ai_job?id=75fec6f2-c8a6-43b1-b184-4d26baba86cc
Signed-off-by: Aleksandr Nogikh <nogikh@google.com>
Link: https://patch.msgid.link/91edfa4c-a63d-400c-9f00-31f3e1f98c00@mail.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
