summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
3 daysgpu: Fix uninitialized buddy for built-in driversKoen Koning1-1/+2
commit cc27314c67516c138ee3829197d1c3b998e29fae upstream. Move buddy to the start of the link order, so its __init runs before any other built-in drivers that may depend on it. Otherwise, a built-in driver that tries to use the buddy allocator will run into a kernel NULL pointer dereference because slab_blocks is uninitialized. Specifically, this fixes drm/xe (as built-in) running into a kernel panic during boot, because it uses buddy during device probe. Fixes: ba110db8e1bc ("gpu: Move DRM buddy allocator one level up (part two)") Cc: Joel Fernandes <joelagnelf@nvidia.com> Cc: Dave Airlie <airlied@redhat.com> Cc: intel-xe@lists.freedesktop.org Reviewed-by: Dave Airlie <airlied@redhat.com> Tested-by: Peter Senna Tschudin <peter.senna@linux.intel.com> Signed-off-by: Koen Koning <koen.koning@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patch.msgid.link/20260213152047.179628-1-koen.koning@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 daysnet: stmmac: fix dwmac4 transmit performance regressionRussell King (Oracle)2-7/+8
commit 5ccde4c81e843ab6b3a324c8e2aa96d9b1270a1a upstream. dwmac4's transmit performance dropped by a factor of four due to an incorrect assumption about which definitions are for what. This highlights the need for sane register macros. Commit 8409495bf6c9 ("net: stmmac: cores: remove many xxx_SHIFT definitions") changed the way the txpbl value is merged into the register: value = readl(ioaddr + DMA_CHAN_TX_CONTROL(dwmac4_addrs, chan)); - value = value | (txpbl << DMA_BUS_MODE_PBL_SHIFT); + value = value | FIELD_PREP(DMA_BUS_MODE_PBL, txpbl); With the following in the header file: #define DMA_BUS_MODE_PBL BIT(16) -#define DMA_BUS_MODE_PBL_SHIFT 16 The assumption here was that DMA_BUS_MODE_PBL was the mask for DMA_BUS_MODE_PBL_SHIFT, but this turns out not to be the case. The field is actually six bits wide, buts 21:16, and is called TXPBL. What's even more confusing is, there turns out to be a PBLX8 single bit in the DMA_CHAN_CONTROL register (0x1100 for channel 0), and DMA_BUS_MODE_PBL seems to be used for that. However, this bit et.al. was listed under a comment "/* DMA SYS Bus Mode bitmap */" which is for register 0x1004. Fix this up by adding an appropriately named field definition under the DMA_CHAN_TX_CONTROL() register address definition. Move the RPBL mask definition under DMA_CHAN_RX_CONTROL(), correctly renaming it as well. Also move the PBL bit definition under DMA_CHAN_CONTROL(), correctly renaming it. This removes confusion over the PBL fields. Fixes: 8409495bf6c9 ("net: stmmac: cores: remove many xxx_SHIFT definitions") Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Bisected-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Link: https://lore.kernel.org/51859704-57fd-4913-b09d-9ac58a57f185@bootlin.com Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Link: https://patch.msgid.link/E1vgY1k-00000003vOC-0Z1H@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 daysnet/mlx5e: Fix NULL pointer dereference in ioctl module EEPROM queryGal Pressman1-2/+4
commit 7d36a4a8bf62dc508bc6bb4b59727aec25064ca5 upstream. The mlx5_query_mcia() function unconditionally dereferences the status pointer to store the MCIA register status value. However, mlx5e_get_module_id() passes NULL since it doesn't need the status value. Add a NULL check before dereferencing the status pointer to prevent a NULL pointer dereference. Fixes: 2e4c44b12f4d ("net/mlx5: Refactor EEPROM query error handling to return status separately") Signed-off-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com> Signed-off-by: Mark Bloch <mbloch@nvidia.com> Link: https://patch.msgid.link/20251225132717.358820-4-mbloch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 daysusb: gadget: f_tcm: synchronize delayed set_alt with teardownCen Zhang2-28/+177
commit 79e2d75725c85607f8a9d87ae9cace62a19f767d upstream. The f_tcm set_alt() path defers endpoint setup to a work item and completes the delayed status response from process context. The delayed work uses f_tcm private state and may complete the setup request after disconnect or function teardown has already moved on. Cancel and drain the delayed set_alt work when the function is unbound or freed. For disable paths, which are reached under the composite device lock, use a small state machine and a non-sleeping cancellation path instead of cancel_work_sync(). If the work is already running, mark it cancelled and let the worker own the cleanup; otherwise tcm_disable() can cancel the queued work and clean up immediately. Also serialize the final delayed-status completion with the cancellation check while holding the composite device lock. This prevents a disconnect from clearing delayed_status while the worker is about to complete the control request. Validation reproduced this kernel report: BUG: KASAN: slab-use-after-free in tcm_delayed_set_alt+0x6c/0xef0 Call Trace: <TASK> dump_stack_lvl+0x66/0xa0 print_report+0xce/0x630 ? tcm_delayed_set_alt+0x6c/0xef0 ? srso_alias_return_thunk+0x5/0xfbef5 ? __virt_addr_valid+0x188/0x320 ? tcm_delayed_set_alt+0x6c/0xef0 kasan_report+0xe0/0x110 ? tcm_delayed_set_alt+0x6c/0xef0 tcm_delayed_set_alt+0x6c/0xef0 ? __pfx_tcm_delayed_set_alt+0x10/0x10 ? process_one_work+0x4cb/0xb90 ? rcu_is_watching+0x20/0x50 ? tcm_delayed_set_alt+0x9/0xef0 process_one_work+0x4d7/0xb90 ? __pfx_process_one_work+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? __list_add_valid_or_report+0x37/0xf0 ? __pfx_tcm_delayed_set_alt+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 worker_thread+0x2d8/0x570 ? __pfx_worker_thread+0x10/0x10 kthread+0x1ad/0x1f0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x3c9/0x540 ? __pfx_ret_from_fork+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? __switch_to+0x2e9/0x730 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Allocated by task 544: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_kmalloc+0x8f/0xa0 tcm_alloc+0x68/0x180 usb_get_function+0x36/0x60 config_usb_cfg_link+0x125/0x1b0 configfs_symlink+0x322/0x890 vfs_symlink+0xc2/0x270 filename_symlinkat+0x295/0x2f0 __x64_sys_symlinkat+0x62/0x90 do_syscall_64+0x115/0x6a0 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 661: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x43/0x70 kfree+0x2f9/0x530 config_usb_cfg_unlink+0x173/0x1e0 configfs_unlink+0x1fa/0x340 vfs_unlink+0x15c/0x510 filename_unlinkat+0x2ba/0x450 __x64_sys_unlinkat+0x63/0x90 do_syscall_64+0x115/0x6a0 entry_SYSCALL_64_after_hwframe+0x77/0x7f Fixes: c52661d60f63 ("usb-gadget: Initial merge of target module for UASP + BOT") Cc: stable <stable@kernel.org> Assisted-by: Codex:gpt-5.5 Signed-off-by: Cen Zhang <zzzccc427@gmail.com> Link: https://patch.msgid.link/20260627104153.3822495-1-zzzccc427@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 daysi3c: mipi-i3c-hci: Fix handling of shared IRQs during early initializationAdrian Hunter2-0/+14
[ Upstream commit c6396b835a5e599c4df656112140f065bb544a24 ] Shared interrupts may fire unexpectedly, including during periods when the controller is not yet fully initialized. Commit b9a15012a1452 ("i3c: mipi-i3c-hci: Add optional Runtime PM support") addressed this issue for the runtime-suspended state, but the same problem can also occur before the bus is enabled for the first time. Ensure the IRQ handler ignores interrupts until initialization is complete by making consistent use of the existing irq_inactive flag. The flag is now set to false immediately before enabling the bus. To guarantee correct ordering with respect to the IRQ handler, protect all transitions of irq_inactive with the same spinlock used inside the handler. Fixes: b8460480f62e1 ("i3c: mipi-i3c-hci: Allow for Multi-Bus Instances") Cc: stable@vger.kernel.org Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Link: https://patch.msgid.link/20260306072451.11131-14-adrian.hunter@intel.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 daysi3c: mipi-i3c-hci: Fix Hot-Join NACKAdrian Hunter1-1/+2
[ Upstream commit fa9586bd77ada1e3861c7bef65f6bb9dcf8d9481 ] The MIPI I3C HCI host controller driver does not implement Hot-Join handling, yet Hot-Join response control defaults to allowing devices to Hot-Join the bus. Configure HC_CONTROL_HOT_JOIN_CTRL to NACK all Hot-Join attempts. Fixes: 9ad9a52cce282 ("i3c/master: introduce the mipi-i3c-hci driver") Cc: stable@vger.kernel.org Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Link: https://patch.msgid.link/20260306072451.11131-3-adrian.hunter@intel.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Stable-dep-of: c6396b835a5e ("i3c: mipi-i3c-hci: Fix handling of shared IRQs during early initialization") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 dayspmdomain: imx93-blk-ctrl: Extract PHY as shared domain for DSI/CSIGuoniu Zhou1-2/+58
[ Upstream commit 99611233f8cda833169fa6487d5dacdf189e5cb0 ] The MIPI DSI and CSI domains share control bits for clock and reset, which can lead to incorrect behavior if one domain disables the shared resource while the other is still active. To fix the issue, introduce a shared MIPI PHY power domain to own the common resources and make DSI and CSI its subdomains. This ensures the shared bits are properly managed and not disabled while still in use. Fixes: e9aa77d413c9 ("soc: imx: add i.MX93 media blk ctrl driver") Cc: stable@vger.kernel.org Signed-off-by: Guoniu Zhou <guoniu.zhou@oss.nxp.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Ulf Hansson <ulfh@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 dayspmdomain: imx93-blk-ctrl: convert to devm_* onlyMarco Felsch1-37/+29
[ Upstream commit 52becc142280eeef828d19f9cd01fd653b588786 ] Convert the driver to devm_ APIs only by making use of devm_add_action_or_reset() and devm_pm_runtime_enable() to simplify the probe error path and to drop the .remove() callback. This also ensures that the device release order equals the device probe error path order. Furthermore drop the dev_set_drvdata() usage since the only user was the .remove() callback which is removed by this commit. Reviewed-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Stable-dep-of: 99611233f8cd ("pmdomain: imx93-blk-ctrl: Extract PHY as shared domain for DSI/CSI") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 daysnet: ipa: fix SMEM state handle leaks in SMP2P initHaoxiang Li1-8/+22
[ Upstream commit 96ca1e658ae459276292bd6d971ab5d8c7e0379a ] ipa_smp2p_init() acquires two Qualcomm SMEM state handles with qcom_smem_state_get(). However, neither the init error paths nor ipa_smp2p_exit() release them. Release both handles with qcom_smem_state_put() in the init error paths and in ipa_smp2p_exit(). Fixes: 530f9216a953 ("soc: qcom: ipa: AP/modem communications") Cc: stable@vger.kernel.org Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com> Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com> Reviewed-by: Alex Elder <elder@riscstar.com> Link: https://patch.msgid.link/20260624065955.2822765-1-haoxiang_li2024@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> [ kzalloc_obj() context line kept as kzalloc(sizeof(*smp2p), GFP_KERNEL) since ipa_smp2p.c was not yet converted in this tree ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 daysata: libata-core: Reject an invalid concurrent positioning ranges countBryam Vargas3-2/+27
[ Upstream commit 533a0b940f901c15e5cbbd4b5d66e871c209e8ce ] ata_dev_config_cpr() takes the number of range descriptors from buf[0] of the concurrent positioning ranges log (up to 255), which the device reports independently of the log size in the GPL directory. The count is then walked at a fixed 32-byte stride in two places with no bound: the log read here, and the INQUIRY VPD page B9h emitter, which writes one descriptor per range into the fixed 2048-byte ata_scsi_rbuf. A device reporting a count larger than its own log overflows the read buffer (up to 7704 bytes past a 512-byte slab), and a count above 62 overflows the response buffer on the emit side. Bound the count once, on probe, against both the log the device returned and the number of descriptors the VPD B9h response buffer can hold (ATA_DEV_MAX_CPR, derived from the rbuf size). Reject an out-of-range count with a warning; this keeps the emitter in bounds with no separate change there. Suggested-by: Damien Le Moal <dlemoal@kernel.org> Fixes: fe22e1c2f705 ("libata: support concurrent positioning ranges log") Fixes: c745dfc541e7 ("libata: fix reading concurrent positioning ranges log") Cc: stable@vger.kernel.org Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me> Reviewed-by: Niklas Cassel <cassel@kernel.org> Signed-off-by: Damien Le Moal <dlemoal@kernel.org> [ adapted `kzalloc_flex()` allocation to `kzalloc(struct_size(...), GFP_KERNEL)` and adjusted context offsets. ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 daysocteontx2-af: cn10k: restrict VF LMTLINE sharing to its own PFJunrui Luo1-0/+9
[ Upstream commit 8cdcf3d2caacdee7ddd363705fb4d93b0c1a0915 ] rvu_mbox_handler_lmtst_tbl_setup() uses req->base_pcifunc as a direct index into the LMT map table to read another function's LMTLINE physical base address and copy it into the caller's own LMT map table entry. The mailbox dispatcher authenticates req->hdr.pcifunc from the IRQ source, but req->base_pcifunc is a separate payload field and is not sanitized. Reject the request with -EPERM when a VF caller's base_pcifunc is not a valid function under its own PF. is_pf_func_valid() bounds the FUNC field to the PF's configured VF count, keeping the computed index inside the caller's own slot block. Fixes: 893ae97214c3 ("octeontx2-af: cn10k: Support configurable LMTST regions") Reported-by: Yuhao Jiang <danisjiang@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Junrui Luo <moonafterrain@outlook.com> Link: https://patch.msgid.link/SYBPR01MB78811656934E713B77DA6CEDAFE62@SYBPR01MB7881.ausprd01.prod.outlook.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 daysocteontx2-af: validate body pcifunc in rvu_mbox_handler_rep_event_notifyMichael Bommarito3-1/+10
[ Upstream commit 2156a29aecfffa2eb7c558255690084efbe9f3b0 ] rvu_mbox_handler_rep_event_notify() in drivers/net/ethernet/marvell/ octeontx2/af/rvu_rep.c queues a sender-controlled REP_EVENT_NOTIFY request body verbatim, and rvu_rep_up_notify() then forwards event->pcifunc (the nested body field, distinct from the AF-normalised header pcifunc) into rvu_get_pfvf(), rvu_get_pf() and the AF->PF mailbox device index without any bounds check. A VF attached to a PF that has been put into switchdev representor mode reaches this path: the VF mailbox handler otx2_pfvf_mbox_handler() forwards every message id including MBOX_MSG_REP_EVENT_NOTIFY to AF without an allowlist, and the AF dispatcher rewrites only msg->pcifunc, leaving struct rep_event::pcifunc attacker-controlled. The sibling rvu_mbox_handler_esw_cfg() refuses requests whose header pcifunc is not rvu->rep_pcifunc; this handler has no equivalent gate. An out-of-range body pcifunc selects an &rvu->pf[]/&rvu->hwvf[] element past the allocated array and, for RVU_EVENT_MAC_ADDR_CHANGE, turns into a six-byte attacker-chosen OOB ether_addr_copy() target inside the queued worker; KASAN reports a slab-out-of-bounds write in rvu_rep_wq_handler. Reject malformed requests at the handler entry by gating on is_pf_func_valid(), which is already the canonical PF/VF range check in this driver; expose it via rvu.h so callers in rvu_rep.c can use it instead of open-coding the same range arithmetic. Fixes: b8fea84a0468 ("octeontx2-pf: Add support to sync link state between representor and VFs") Cc: stable@vger.kernel.org Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com> Link: https://patch.msgid.link/20260520154157.1439319-1-michael.bommarito@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Stable-dep-of: 8cdcf3d2caac ("octeontx2-af: cn10k: restrict VF LMTLINE sharing to its own PF") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 daysnet: mana: Optimize irq affinity for low vcpu configsShradha Gupta1-14/+64
[ Upstream commit 5316394b1752f6cf3f9901e7fefdec1cd1d97fd3 ] Before the commit 755391121038 ("net: mana: Allocate MSI-X vectors dynamically"), all the MANA IRQs were assigned statically and together during early driver load. After this commit, the IRQ allocation for MANA was done in two phases. HWC IRQ allocated earlier and then, queue IRQs dynamically added at a later point. By this time, the IRQ weights on vCPUs can become imbalanced and if IRQ count is greater than the vCPU count the topology aware IRQ distribution logic in MANA can cause multiple MANA IRQs to land on the same vCPUs, while other sibling vCPUs have none (case 1). On SMP enabled, low-vCPU systems, this becomes a bigger problem as the softIRQ handling overhead of two IRQs on the same vCPUs becomes much more than their overheads if they were spread across sibling vCPUs. In such cases when many parallel TCP connections are tested, the throughput drops significantly. Fix the affinity assignment logic, in cases where the IRQ count is greater than the vCPU count and when IRQs are added dynamically, by utilizing all the vCPUs irrespective of their NUMA/core bindings (case 2). The results of setting the affinity and hint to NULL were also studied, and we observed that, with this logic if there are pre-existing IRQs allocated on the VM (apart from MANA), during MANA IRQs allocation, it leads to clustering of the MANA queue IRQs again (case 3). ======================================================= Case 1: without this patch ======================================================= 4 vcpu(2 cores), 5 MANA IRQs (1 HWC + 4 Queue) TYPE effective vCPU aff ======================================================= IRQ0: HWC 0 IRQ1: mana_q1 0 IRQ2: mana_q2 2 IRQ3: mana_q3 0 IRQ4: mana_q4 3 %soft on each vCPU(mpstat -P ALL 1) on receiver vCPU 0 1 2 3 ======================================================= pass 1: 38.85 0.03 24.89 24.65 pass 2: 39.15 0.03 24.57 25.28 pass 3: 40.36 0.03 23.20 23.17 ======================================================= Case 2: with this patch ======================================================= 4 vcpu(2 cores), 5 MANA IRQs (1 HWC + 4 Queue) TYPE effective vCPU aff ======================================================= IRQ0: HWC 0 IRQ1: mana_q1 0 IRQ2: mana_q2 1 IRQ3: mana_q3 2 IRQ4: mana_q4 3 %soft on each vCPU(mpstat -P ALL 1) on receiver vCPU 0 1 2 3 ======================================================= pass 1: 15.42 15.85 14.99 14.51 pass 2: 15.53 15.94 15.81 15.93 pass 3: 16.41 16.35 16.40 16.36 ======================================================= Case 3: with affinity set to NULL ======================================================= 4 vCPU(2 cores), 5 MANA IRQs (1 HWC + 4 Queue) TYPE effective vCPU aff ======================================================= IRQ0: HWC 0 IRQ1: mana_q1 2 IRQ2: mana_q2 3 IRQ3: mana_q3 2 IRQ4: mana_q4 3 ======================================================= Throughput Impact(in Gbps, same env) ======================================================= TCP conn with patch w/o patch aff NULL 20480 15.65 7.73 5.25 10240 15.63 8.93 5.77 8192 15.64 9.69 7.16 6144 15.64 13.16 9.33 4096 15.69 15.75 13.50 2048 15.69 15.83 13.61 1024 15.71 15.28 13.60 Fixes: 755391121038 ("net: mana: Allocate MSI-X vectors dynamically") Cc: stable@vger.kernel.org Co-developed-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com> Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com> Signed-off-by: Shradha Gupta <shradhagupta@linux.microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Yury Norov <ynorov@nvidia.com> Link: https://patch.msgid.link/20260624072138.1632849-1-shradhagupta@linux.microsoft.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> [ Kept 7.1's `int *irqs, irq, err, i;` declaration (minus the deleted `skip_first_cpu`) instead of upstream's `msi` variant, as this tree lacks the `mana_gd_get_gic()` refactor. ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 daysnet: mana: Validate the packet length reported by the NICDexuan Cui1-0/+13
[ Upstream commit 2e2a83b4998af4384e677d3b2ac08565274279bf ] Validate the packet length reported in the RX CQE before passing it to skb processing. The CQE is supplied by the NIC device and should not be blindly trusted. Cc: stable@vger.kernel.org Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Dexuan Cui <decui@microsoft.com> Fixes: ca9c54d2d6a5 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)") Link: https://patch.msgid.link/20260702041237.617719-2-decui@microsoft.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 daysmmc: vub300: fix use-after-free on probe failureGuangshuo Li1-3/+7
[ Upstream commit a3b5f242997a3be7404112fd48784881560aea57 ] The vub300 driver lifetime-manages its controller state using vub300->kref, with vub300_delete() freeing the mmc host when the last reference is dropped. The probe error path after the inactivity timer has been armed still bypasses that lifetime rule, however, and falls through to mmc_free_host() directly if mmc_add_host() fails. The race window is between arming the inactivity timer and reaching the probe error unwind after mmc_add_host() fails: probe thread timer/workqueue ------------ --------------- kref_init(&vub300->kref) ref = 1 kref_get(&vub300->kref) ref = 2, timer ref add_timer(inactivity_timer) fires after one second | | race window |<----------------------------------------------------> | mmc_add_host(mmc) inactivity timer fires vub300_queue_dead_work() kref_get() ref = 3 queue_work(deadwork) mmc_add_host() fails timer_delete_sync() mmc_free_host(mmc) frees vub300 deadwork runs use-after-free The inactivity timeout is one second, so this would require mmc_add_host() to both fail and take more than one second to do so. This is unlikely to happen in practice, but the error path is still wrong. timer_delete_sync() only waits for the timer callback itself. It does not flush deadwork that the callback may already have queued. As a result, queued deadwork can still hold a kref while the probe error path directly frees the backing mmc host, including the vub300 storage. Fix this by using the same lifetime mechanism as disconnect. Clear vub300->interface so that the timer callback and any queued deadwork return early and drop their references, then drop the initial probe reference and return without falling through to err_free_host. Fixes: 0613ad2401f8 ("mmc: vub300: fix return value check of mmc_add_host()") Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com> Reviewed-by: Johan Hovold <johan@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulfh@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 daysmmc: vub300: rename probe error labelsJohan Hovold1-8/+10
[ Upstream commit 5b8b35d6f4fa758dd5e8ae18526ea1c73f6787e0 ] Error labels should be named after what they do. Rename the probe error labels. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Stable-dep-of: a3b5f242997a ("mmc: vub300: fix use-after-free on probe failure") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 daysdm: avoid leaking the caller's thread keyring via the table device fileIngo Blechschmidt1-1/+10
[ Upstream commit 981ccd97f7153d310dfa92a534525bbaf46752c2 ] The refactoring in commit a28d893eb327 ("md: port block device access to file") accidentally causes the caller's thread keyring to be kept alive long beyond the caller's lifetime. As a result, "cryptsetup luksSuspend" silently fails to wipe the LUKS volume key from memory. In detail: "cryptsetup luksOpen" uses its supposedly ephemeral thread keyring to pass the volume key to the kernel. dm-crypt's crypt_set_keyring_key() copies the key material into its own crypt_config structure and then drops its own reference to the key in the keyring with key_put(). With this fix, restoring pre-v6.9 behavior, the copy in the thread keyring is then promptly garbage collected, such that exactly one copy of the volume key remains. This single copy is correctly wiped from memory on "cryptsetup luksSuspend". Without this fix, the thread keyring and the volume key in it remains. This second copy is only freed on "luksClose". "luksSuspend" neither knows about this copy nor has any way to remove it, so the key remains recoverable from RAM after a suspend that is documented to have wiped it. This fix should not introduce new security problems, as the code is anyway gated by CAP_SYS_ADMIN. The device-mapper core, not the calling task, is the legitimate owner of this long-lived file. Fixes: a28d893eb327 ("md: port block device access to file") Closes: https://gitlab.com/cryptsetup/cryptsetup/-/work_items/993 Link: https://www.speicherleck.de/iblech/cryptsetup-luksSuspend-issue-reproduction/ Signed-off-by: Ingo Blechschmidt <iblech@speicherleck.de> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Tested-by: Ondrej Kozina <okozina@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 daysaccel/amdxdna: reject command submission on devices without a submit opDoruk Tan Ozturk1-0/+4
[ Upstream commit 38953513d7313992676d4136cd425cdb70c6278e ] amdxdna_cmd_submit() calls xdna->dev_info->ops->cmd_submit() unconditionally, but only aie2_dev_ops defines that callback. aie4_vf_ops (the AIE4 SR-IOV virtual function) does not, so a user AMDXDNA_EXEC_CMD ioctl on an AIE4 device reaches a NULL function-pointer call and oopses the kernel. AIE4 submits work through a mapped user queue and doorbell, not this ioctl path. Reject the submission early with -EOPNOTSUPP when the device provides no cmd_submit op, so the shared EXEC ioctl is a clean no-op on such devices. Fixes: aac243092b70 ("accel/amdxdna: Add command execution") Cc: stable@vger.kernel.org Found by 0sec automated security-research tooling (https://0sec.ai). Assisted-by: 0sec:claude-opus-4-8 Signed-off-by: Doruk Tan Ozturk <doruk@0sec.ai> Reviewed-by: Lizhi Hou <lizhi.hou@amd.com> Signed-off-by: Lizhi Hou <lizhi.hou@amd.com> Link: https://patch.msgid.link/20260713173030.87541-3-doruk@0sec.ai Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 daysdmaengine: dw-edma-pcie: Reject devices without driver dataKoichiro Den1-0/+3
[ Upstream commit 11d7cfe0c119691b2dafbb699bbca90258c678aa ] dw_edma_pcie_probe() treats the PCI device ID driver_data as the template for the controller layout and copies it unconditionally. A device bound dynamically via sysfs can match the driver without that data, which leads to a NULL pointer dereference. Reject such matches before enabling the device. Fixes: 41aaff2a2ac0 ("dmaengine: Add Synopsys eDMA IP PCIe glue-logic") Cc: stable@vger.kernel.org Signed-off-by: Koichiro Den <den@valinux.co.jp> Reviewed-by: Frank Li <Frank.Li@nxp.com> Link: https://patch.msgid.link/20260521142153.2957432-3-den@valinux.co.jp Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 daysdmaengine: dw-edma: Fix confusing cleanup.h syntaxKrzysztof Kozlowski1-2/+2
[ Upstream commit f9ef8dedee34e2d7828d5a6a0643cd969aaa8437 ] Initializing automatic __free variables to NULL without need (e.g. branches with different allocations), followed by actual allocation is in contrary to explicit coding rules guiding cleanup.h: "Given that the "__free(...) = NULL" pattern for variables defined at the top of the function poses this potential interdependency problem the recommendation is to always define and assign variables in one statement and not group variable definitions at the top of the function when __free() is used." Code does not have a bug, but is less readable and uses discouraged coding practice, so fix that by moving declaration to the place of assignment. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org> Link: https://patch.msgid.link/20251208020729.4654-2-krzysztof.kozlowski@oss.qualcomm.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Stable-dep-of: 11d7cfe0c119 ("dmaengine: dw-edma-pcie: Reject devices without driver data") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 daysmtd: maps: vmu-flash: fix fault in unaligned fixupFlorian Fuchs1-5/+3
[ Upstream commit 79d1661502c6e4b6f626185cef72cf2fa78116e1 ] Use kzalloc_obj() / kzalloc_objs() to allocate the memcard structs, instead of kmalloc_obj() / kmalloc_objs() to prevent access to uninitialized data. Fixes runtime error: Fault in unaligned fixup: 0000 [#1] at mtd_get_fact_prot_info. Fixes: 47a72688fae7 ("mtd: flash mapping support for Dreamcast VMU.") Cc: stable@vger.kernel.org Signed-off-by: Florian Fuchs <fuchsfl@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 daysremoteproc: xlnx: Check remote core stateTanmay Shah2-10/+41
[ Upstream commit a48df51d23138388900995add2854cda4aa68e55 ] The remote state is set to RPROC_DETACHED if the resource table is found in the memory. However, this can be wrong if the remote is not started, but firmware is still loaded in the memory. Use PM_GET_NODE_STATUS call to the firmware to request the state of the RPU node. If the RPU is actually out of reset and running, only then move the remote state to RPROC_DETACHED, otherwise keep the remote state to RPROC_OFFLINE. Signed-off-by: Tanmay Shah <tanmay.shah@amd.com> Fixes: bca4b02ef92e ("remoteproc: xlnx: Add attach detach support") Reviewed-by: Beleswar Padhi <b-padhi@ti.com> Acked-by: Michal Simek <michal.simek@amd.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20260428221855.313752-1-tanmay.shah@amd.com Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> [ replaced the unavailable zynqmp_pm_get_node_status() helper with a direct zynqmp_pm_invoke_fn() call and exported it for modular builds. ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 dayscxl: Fix CXL_HEADERLOG_SIZE to match RAS Capability sizeTerry Bowman3-17/+48
[ Upstream commit c268f949e219f9e179558e836f457f6c5fbec416 ] The CXL r4.0 8.2.4.17.7 RAS Capability Structure has total length 0x58 bytes (CXL_RAS_CAPABILITY_LENGTH); the Header Log occupies the trailing 64 bytes at offset 0x18. CXL_HEADERLOG_SIZE was defined as SZ_512, eight times the actual on-device size. header_log_copy() reads CXL_HEADERLOG_SIZE_U32 (128) dwords from the RAS capability iomap, overrunning the 88-byte mapping by 448 bytes. The cxl_aer_uncorrectable_error trace event memcpy()s CXL_HEADERLOG_SIZE (512) bytes from its source. For the CPER caller the source is struct cxl_ras_capability_regs::header_log[16] (64 bytes) embedded in a stack-local cxl_cper_prot_err_work_data, so the memcpy reads 448 bytes of kernel stack into the trace event ring buffer where userspace can read it via tracefs. Set CXL_HEADERLOG_SIZE to 64 and derive CXL_HEADERLOG_SIZE_U32 from it, bringing all iomap readers into agreement on 16 dwords. Userspace tools such as rasdaemon have grown a dependency on the buggy 512-byte (128 u32) header_log layout in the cxl_aer_uncorrectable_error trace event. Add CXL_HEADERLOG_TRACE_SIZE_U32 = 128 and use it for the trace event __array and its memcpy to preserve that ABI. Both callers now pass a zero-filled u32[CXL_HEADERLOG_TRACE_SIZE_U32] staging buffer with only the first CXL_HEADERLOG_SIZE_U32 (16) entries populated from hardware; the remaining 112 u32s are zero-padded, keeping the 512-byte trace ring buffer layout intact. [ dj: Replaced 64 with SZ_64 per RichardC ] Fixes: 36f257e3b0ba ("acpi/ghes, cxl/pci: Process CXL CPER Protocol Errors") Fixes: 2905cb5236cb ("cxl/pci: Add (hopeful) error handling support") Cc: stable@vger.kernel.org Reported-by: Sashiko Signed-off-by: Terry Bowman <terry.bowman@amd.com> Reviewed-by: Alison Schofield <alison.schofield@intel.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Ben Cheatham <benjamin.cheatham@amd.com> Reviewed-by: Richard Cheng <icheng@nvidia.com> Link: https://patch.msgid.link/20260605180610.2249458-1-terry.bowman@amd.com Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 dayscxl/pci: Remove CXL VH handling in CONFIG_PCIEAER_CXL conditional blocks ↵Dave Jiang7-194/+232
from core/pci.c [ Upstream commit 7ff8b1d60881c5f97b5ae426e14d2822917d3b69 ] Create new config CONFIG_CXL_RAS and put all CXL RAS items behind the config. The config will depend on CPER and PCIE AER to build. Move the related VH RAS code from core/pci.c to core/ras.c. Restricted CXL host (RCH) RAS functions will be moved in a future patch. Cc: Robert Richter <rrichter@amd.com> Reviewed-by: Joshua Hahn <joshua.hahnjy@gmail.com> Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Alison Schofield <alison.schofield@intel.com> Co-developed-by: Terry Bowman <terry.bowman@amd.com> Signed-off-by: Terry Bowman <terry.bowman@amd.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Link: https://patch.msgid.link/20260114182055.46029-8-terry.bowman@amd.com Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Stable-dep-of: c268f949e219 ("cxl: Fix CXL_HEADERLOG_SIZE to match RAS Capability size") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 dayscxl/pci: Remove unnecessary CXL RCH handling helper functionsTerry Bowman1-14/+2
[ Upstream commit eb78ef4d6f0e51243c1ee117f801dbc503e886ab ] cxl_handle_rdport_cor_ras() and cxl_handle_rdport_ras() are specific to Restricted CXL Host (RCH) handling. Improve readability and maintainability by replacing these and instead using the common cxl_handle_cor_ras() and cxl_handle_ras() functions. Signed-off-by: Terry Bowman <terry.bowman@amd.com> Reviewed-by: Alejandro Lucero <alucerop@amd.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Link: https://patch.msgid.link/20260114182055.46029-6-terry.bowman@amd.com Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Stable-dep-of: c268f949e219 ("cxl: Fix CXL_HEADERLOG_SIZE to match RAS Capability size") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 dayscxl/pci: Remove unnecessary CXL Endpoint handling helper functionsTerry Bowman1-18/+8
[ Upstream commit ca3d1a53e62093d17436abd447463da9c0f4e56b ] The CXL driver's cxl_handle_endpoint_cor_ras()/cxl_handle_endpoint_ras() are unnecessary helper functions used only for Endpoints. Remove these functions as they are not common for all CXL devices and do not provide value for EP handling. Rename __cxl_handle_ras to cxl_handle_ras() and __cxl_handle_cor_ras() to cxl_handle_cor_ras(). Signed-off-by: Terry Bowman <terry.bowman@amd.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Tested-by: Joshua Hahn <joshua.hahnjy@gmail.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Link: https://patch.msgid.link/20260114182055.46029-5-terry.bowman@amd.com Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Stable-dep-of: c268f949e219 ("cxl: Fix CXL_HEADERLOG_SIZE to match RAS Capability size") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 dayspinctrl: renesas: rzg2l: Use -ENOTSUPP instead of -EOPNOTSUPPClaudiu Beznea1-4/+4
[ Upstream commit c1492da3939c89372929e062d731f328f7693f1e ] The pinctrl and GPIO core code make exceptions for the -ENOTSUPP error code. One such example is gpio_set_config_with_argument_optional(), which returns success when gpio_set_config_with_argument() returns -ENOTSUPP, but reports failure for all other error codes. Returning -EOPNOTSUPP from the pinctrl driver on the unsupported pinctrl operation may lead to boot failures when pinctrl drivers implements struct gpio_chip::set_config, the system uses GPIO hogs, and the struct gpio_chip::set_config implementation returns -EOPNOTSUPP for the unsupported operations. Return -ENOTSUPP for the unsupported pinctrl operation. Fixes: 560c633d378a ("pinctrl: renesas: rzg2l: Drop oen_read and oen_write callbacks") Fixes: c4c4637eb57f ("pinctrl: renesas: Add RZ/G2L pin and gpio controller driver") Cc: stable@vger.kernel.org Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://patch.msgid.link/20260515124008.2947838-2-claudiu.beznea@kernel.org Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 daysgpu/buddy: bail out of try_harder when alignment cannot be honouredArunpravin Paneer Selvam1-19/+44
[ Upstream commit 56bc6384314fb9ae98975fb2af8b143097ede3dc ] The try_harder contiguous fallback could return a range whose start offset did not match the caller's min_block_size. When a candidate's start is misaligned, realign it: free the misaligned run and reallocate exactly @size at the next lower min_block_size boundary. This keeps the returned size unchanged with no surplus to trim, and rejects the request only when no aligned candidate fits. v2: align misaligned candidates down to min_block_size instead of bailing out, for both the RHS and LHS paths (Matthew). Fixes: 0a1844bf0b53 ("drm/buddy: Improve contiguous memory allocation") Suggested-by: Christian König <christian.koenig@amd.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Christian König <christian.koenig@amd.com> Cc: Timur Kristóf <timur.kristof@gmail.com> Cc: stable@vger.kernel.org Reviewed-by: Matthew Auld <matthew.auld@intel.com> Tested-by: John Olender <john.olender@gmail.com> Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com> Link: https://patch.msgid.link/20260709131050.1022759-1-Arunpravin.PaneerSelvam@amd.com Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 daysdrm: drop lib from header search path.Dave Airlie1-1/+1
commit ee8bfb15d02dddb554ad4bdd6c44297f19556563 upstream. This was leftover from when I dropped it in 4a9671a03f2b ("gpu: Move DRM buddy allocator one level up (part one)") Signed-off-by: Dave Airlie <airlied@redhat.com> Cc: Miguel Ojeda <ojeda@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 daysgpu: Move DRM buddy allocator one level up (part two)Joel Fernandes31-1653/+1730
[ Upstream commit ba110db8e1bc206c13fd7d985e79b033f53bfdea ] Move the DRM buddy allocator one level up so that it can be used by GPU drivers (example, nova-core) that have usecases other than DRM (such as VFIO vGPU support). Modify the API, structures and Kconfigs to use "gpu_buddy" terminology. Adapt the drivers and tests to use the new API. The commit cannot be split due to bisectability, however no functional change is intended. Verified by running K-UNIT tests and build tested various configurations. Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com> Reviewed-by: Dave Airlie <airlied@redhat.com> [airlied: I've split this into two so git can find copies easier. I've also just nuked drm_random library, that stuff needs to be done elsewhere and only the buddy tests seem to be using it]. Signed-off-by: Dave Airlie <airlied@redhat.com> Stable-dep-of: 56bc6384314f ("gpu/buddy: bail out of try_harder when alignment cannot be honoured") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 daysVDUSE: avoid leaking information to userspaceJason Wang2-2/+2
[ Upstream commit 9c1523803445ee0348f62b77793266dd981596e0 ] The bounceing is not necessarily page aligned, so current VDUSE can leak kernel information through mapping bounce pages to userspace. Allocate bounce pages with __GFP_ZERO to avoid leaking information to userspace. Fixes: 8c773d53fb7b ("vduse: Implement an MMU-based software IOTLB") Cc: stable@vger.kernel.org Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Xie Yongji <xieyongji@bytedance.com> Reviewed-by: Eugenio Pérez <eperezma@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Message-ID: <20260130050750.4050-1-jasowang@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 daysvduse: take out allocations from vduse_dev_alloc_coherentEugenio Pérez2-3/+1
[ Upstream commit 489d76520612abf9a4ede4344349105406c91a73 ] The function vduse_dev_alloc_coherent will be called under rwlock in next patches. Make it out of the lock to avoid increasing its fail rate. Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <20260119143306.1818855-10-eperezma@redhat.com> Stable-dep-of: 9c1523803445 ("VDUSE: avoid leaking information to userspace") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 daysvduse: remove unused vaddr parameter of vduse_domain_free_coherentEugenio Pérez3-5/+3
[ Upstream commit 766e1749c0ef6a09651be9b8a8283d508c322b58 ] We will modify the function in next patches so let's clean it first. Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <20260119143306.1818855-9-eperezma@redhat.com> Stable-dep-of: 9c1523803445 ("VDUSE: avoid leaking information to userspace") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 daysvduse: return internal vq group struct as map tokenEugenio Pérez3-30/+105
[ Upstream commit 02e3f7ffe2906033da73b7c7ea8180b131d0cdbc ] Return the internal struct that represents the vq group as virtqueue map token, instead of the device. This allows the map functions to access the information per group. At this moment all the virtqueues share the same vq group, that only can point to ASID 0. This change prepares the infrastructure for actual per-group address space handling Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <20260119143306.1818855-5-eperezma@redhat.com> Stable-dep-of: 9c1523803445 ("VDUSE: avoid leaking information to userspace") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 daysdrm/amd/display: Fix DTB DTO updates breaking live pixel rate sourcesHarry Wentland2-2/+16
commit 76a2db58e95e328007043f54ac3c7336ccbee440 upstream. dcn32_update_clocks_update_dtb_dto() and its dcn35 counterpart reprogram the DTB DTO of every timing generator in the context whenever the DTBCLK reference changes, passing a zeroed pixel rate and never setting is_hdmi. Both dccg set_dtbclk_dto() implementations treat a zero pixel rate as a disable request. On dcn32 that branch drives PIPE_DTO_SRC_SEL to the DP DTO source, so a timing generator actively scanning out an HDMI stream has its pixel rate source re-muxed out from under the live raster and the OTG stops on the spot. On dcn35 it clears DTBCLK_DTO_ENABLE and restores DTBCLK_Pn clock gating, which does the same to a live 128b/132b stream. Two displays where only one runs a 128b/132b link hit this reliably. is_dtbclk_required() holds the DTBCLK reference high while both are active, and the moment the 128b/132b stream is torn down (compositor switch, display disable, hot-unplug) the next safe_to_lower pass drops the reference to the lowest DPM level and the DTO walk freezes the surviving screen. On Navi31 the DAL mailbox then goes deaf on the DISPCLK hard-min that follows the walk in dcn32_update_clocks(), stranding both SMU mailboxes until reboot. Set is_hdmi for HDMI and DVI signals so the disable path leaves the pixel rate source selection on the HDMI path, and pass the real pixel rate for 128b/132b streams so a reference change rescales their DTO instead of disabling it. Fixes: 128c1ca0303f ("drm/amd/display: Update DTBCLK for DCN32") Fixes: 8774029f76b9 ("drm/amd/display: Add DCN35 CLK_MGR") Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> [ mschwartz: dcn32 and dcn35 clk_mgr hunks only. The rest is HDMI FRL enablement, absent before 7.2, so the FRL conditions and the req_audio_dtbclk_khz assignment they guard are dropped and the FRL-centric changelog is rewritten. Added the pipe_ctx->stream check the new dereferences need. ] Signed-off-by: Matthew Schwartz <matthew.schwartz@linux.dev> Signed-off-by: Sasha Levin <sashal@kernel.org>
3 daysublk: wait on ublk_dev_ready() instead of ub->completionMing Lei1-15/+37
commit 432a9b2780c0a01caf547bd1fc2fcf28aeb8d173 upstream. ub->completion is only re-armed by a successful START_USER_RECOVERY. If the ublk server sends END_USER_RECOVERY without one - e.g. its START failed with -EBUSY and the error was ignored - the wait is satisfied by the stale completion of the previous recovery cycle, and the device is marked LIVE and the requeue list kicked while the FETCH stream is still running and ubq->canceling is still set. The kick redispatches a previously requeued request, __ublk_queue_rq_common() sees ->canceling and parks it again via __ublk_abort_rq(), and after the last FETCH clears ->canceling nothing ever kicks the requeue list again: the request is stranded there while holding its tag. If it is the flush machinery's flush_rq, every subsequent fsync piles up in uninterruptible sleep and teardown hangs on tag draining. This matches a report of a lost PREFLUSH with ext4 on top of ublk after daemon crash recovery. ub->completion is an edge-triggered latch used as a proxy for the level condition "every queue has fetched all I/O commands", which can regress (F_BATCH's UNPREP, daemon death) and whose re-arm can be skipped. Drop it and wait on the real condition instead: the new helper ublk_wait_dev_ready_and_lock() waits on ublk_dev_ready() via wait_var_event_interruptible(), woken from ublk_mark_io_ready(), then re-checks it under ub->mutex, waiting again on regression, and returns with the mutex held and readiness guaranteed. Readiness becomes true in the same ub->mutex critical section that clears the last queue's ->canceling, so END_USER_RECOVERY marks the device LIVE and kicks the requeue list strictly after ->canceling clears. The wait stays interruptible, so a server whose daemon died can still be signalled out. For ublk_ctrl_start_dev() this replaces the fail-fast -EINVAL on an F_BATCH ready->UNPREP regression with waiting until the device is ready again. Reported-by: George Salisbury <gsalisbury@apnic.net> Fixes: 728cbac5fe21 ("ublk: move device reset into ublk_ch_release()") Cc: stable@vger.kernel.org Signed-off-by: Ming Lei <tom.leiming@gmail.com> Link: https://patch.msgid.link/20260719134540.120269-1-tom.leiming@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk> [ 6.18.y tracks readiness per fetched I/O command in ->nr_io_ready rather than per queue in ->nr_queue_ready, so wait and wake on that counter; ->canceling is cleared by ublk_reset_io_flags(), which stays in ublk_mark_io_ready(). UBLK_F_BATCH_IO does not exist here, so ublk_ctrl_start_dev() has no F_BATCH readiness re-check to replace, and readiness can only regress via ublk_reset_ch_dev() on daemon death. ] Signed-off-by: Sasha Levin <sashal@kernel.org>
3 daysdrm/xe/uapi: Reject coh_none PAT index for CPU_ADDR_MIRRORJia Yao1-0/+2
commit 4d58d7535e826a3175527b6174502f0db319d7f6 upstream. Add validation in xe_vm_bind_ioctl() to reject PAT indices with XE_COH_NONE coherency mode when used with DRM_XE_VM_BIND_FLAG_CPU_ADDR_MIRROR. CPU address mirror mappings use system memory that is CPU cached, which makes them incompatible with COH_NONE PAT indices. Allowing COH_NONE with CPU cached buffers is a security risk, as the GPU may bypass CPU caches and read stale sensitive data from DRAM. Although CPU_ADDR_MIRROR does not create an immediate mapping, the backing system memory is still CPU cached. Apply the same PAT coherency restrictions as DRM_XE_VM_BIND_OP_MAP_USERPTR. v2: - Correct fix tag v6: - No change v7: - Correct fix tag v8: - Rebase v9: - Limit the restrictions to iGPU v10: - Just add the iGPU logic but keep dGPU logic Fixes: b43e864af0d4 ("drm/xe/uapi: Add DRM_XE_VM_BIND_FLAG_CPU_ADDR_MIRROR") Cc: <stable@vger.kernel.org> # v6.15+ Cc: Shuicheng Lin <shuicheng.lin@intel.com> Cc: Mathew Alwin <alwin.mathew@intel.com> Cc: Michal Mrozek <michal.mrozek@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Signed-off-by: Jia Yao <jia.yao@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Acked-by: Michal Mrozek <michal.mrozek@intel.com> Signed-off-by: Matthew Auld <matthew.auld@intel.com> Link: https://patch.msgid.link/20260417055917.2027459-3-jia.yao@intel.com Signed-off-by: Sasha Levin <sashal@kernel.org>
3 daysdm-verity: fix buffer overflow in FEC calculationMikulas Patocka2-3/+3
commit 31d6e6c0ba8d5a7bd59660035a089307100c5e8e upstream. There's a buffer overflow in dm-verity-fec: if (neras && *neras <= v->fec->roots) fio->erasures[(*neras)++] = i; This allows *neras to reach roots + 1 (the post-increment pushes it past roots). This value is then passed as no_eras to decode_rs8(). Inside the RS decoder (lib/reed_solomon/decode_rs.c:113-121), the erasure locator polynomial loop writes lambda[j] where j can reach nroots + 1 — one element past the end of lambda[] (which is sized nroots + 1, valid indices 0..nroots). The out-of-bounds write lands on syn[0], corrupting the syndrome buffer. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Assisted-by: Claude:claude-opus-4-6 Cc: stable@vger.kernel.org Fixes: a739ff3f543a ("dm verity: add support for forward error correction") Reviewed-by: Sami Tolvanen <samitolvanen@google.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Eric Biggers <ebiggers@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
3 daysdm-verity-fec: replace {MAX,MIN}_RSN with {MIN,MAX}_ROOTSEric Biggers2-7/+6
commit 82fbd6a3e29a329d439690cd7ccc4162c9cd8db6 upstream. Every time DM_VERITY_FEC_{MAX,MIN}_RSN are used, they are subtracted from DM_VERITY_FEC_RSM to get the bounds on the number of roots. Therefore, replace these with {MIN,MAX}_ROOTS constants which are more directly useful. (Note the inversion, where MAX_RSN maps to MIN_ROOTS and MIN_RSN maps to MAX_ROOTS.) No functional change. Signed-off-by: Eric Biggers <ebiggers@kernel.org> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
3 daysdm-verity-fec: fix reading parity bytes split across blocks (take 3)Eric Biggers1-56/+44
commit 430a05cb926f6bdf53e81460a2c3a553257f3f61 upstream. fec_decode_bufs() assumes that the parity bytes of the first RS codeword it decodes are never split across parity blocks. This assumption is false. Consider v->fec->block_size == 4096 && v->fec->roots == 17 && fio->nbufs == 1, for example. In that case, each call to fec_decode_bufs() consumes v->fec->roots * (fio->nbufs << DM_VERITY_FEC_BUF_RS_BITS) = 272 parity bytes. Considering that the parity data for each message block starts on a block boundary, the byte alignment in the parity data will iterate through 272*i mod 4096 until the 3 parity blocks have been consumed. On the 16th call (i=15), the alignment will be 4080 bytes into the first block. Only 16 bytes remain in that block, but 17 parity bytes will be needed. The code reads out-of-bounds from the parity block buffer. Fortunately this doesn't normally happen, since it can occur only for certain non-default values of fec_roots *and* when the maximum number of buffers couldn't be allocated due to low memory. For example with block_size=4096 only the following cases are affected: fec_roots=17: nbufs in [1, 3, 5, 15] fec_roots=19: nbufs in [1, 229] fec_roots=21: nbufs in [1, 3, 5, 13, 15, 39, 65, 195] fec_roots=23: nbufs in [1, 89] Regardless, fix it by refactoring how the parity blocks are read. Fixes: 6df90c02bae4 ("dm-verity FEC: Fix RS FEC repair for roots unaligned to block size (take 2)") Cc: stable@vger.kernel.org Signed-off-by: Eric Biggers <ebiggers@kernel.org> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
3 daysdm-verity-fec: fix the size of dm_verity_fec_io::erasuresEric Biggers1-1/+2
commit a7fca324d7d90f7b139d4d32747c83a629fdb446 upstream. At most 25 entries in dm_verity_fec_io::erasures are used: the maximum number of FEC roots plus one. Therefore, set the array size accordingly. This reduces the size of dm_verity_fec_io by 912 bytes. Note: a later commit introduces a constant DM_VERITY_FEC_MAX_ROOTS, which allows the size to be more clearly expressed as DM_VERITY_FEC_MAX_ROOTS + 1. This commit just fixes the size first. Fixes: a739ff3f543a ("dm verity: add support for forward error correction") Cc: stable@vger.kernel.org Signed-off-by: Eric Biggers <ebiggers@kernel.org> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
3 daysdrm/amdgpu: fix check in amdgpu_hmm_invalidate_gfxChristian König2-2/+2
commit 52f650963d8825e97a0ccdd2b616f8a01d9d3d38 upstream. For a short moment during alloc/free the userptr BO is not part of his VM, so bo->vm_bo can be NULL. Keep a reference to the VM root PD as parent of the userptr BO so that we can always use that to wait for all submissions of the VM instead of only the one involving the userptr BO. Signed-off-by: Christian König <christian.koenig@amd.com> Fixes: 91250893cbaa ("drm/amdgpu: fix waiting for all submissions for userptrs") Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/5399 Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 631849ff5d603841e74f19f4a5e30fe1f7d7cf30) Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 daysdrm/amd/pm: fix smu13 power limit range calculationYang Wang2-11/+15
commit 220f22e1d66c1cfb63387eb1c4210f92a357c2d9 upstream. SMU13 reports SocketPowerLimitAc/Dc as the default power limit, but MsgLimits.Power may carry a different firmware bound for the same PPT throttler. Using only the socket limit for both min and max can therefore expose an incorrect power range. Keep the socket limit as the default, but derive the range from both values: use the lower value for the min base and the higher value for the max base before applying OD percentages. Keep the current limit query independent from the cap calculation. Fixes: 1eaf26db9590 ("drm/amd/pm: fix smu13 power limit default/cap calculation") Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/5419 Signed-off-by: Yang Wang <kevinyang.wang@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit f45bbf0f62f266ed8422d84f347d75d5fca846a7) Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 daysdrm/amdgpu: fix aperture mapping leakAsad Kamal2-22/+16
commit ea772a440d56b285f4d491affac50ecd41f6b402 upstream. amdgpu_pci_remove() calls drm_dev_unplug() before invoking the driver fini routines. This causes drm_dev_enter() in amdgpu_ttm_fini() to always return false, so iounmap(aper_base_kaddr) never runs on normal driver unload, leaving an orphaned entry in the x86 PAT interval tree. On connected_to_cpu hardware, the aperture is mapped write-back (WB) via ioremap_cache(). On reload, IP discovery calls memremap(..., MEMREMAP_WC) over the same range. The WC vs WB conflict causes: ioremap error for 0x..., requested 0x1, got 0x0 amdgpu: discovery failed: -2 Fix by switching to devres-managed mappings so cleanup is guaranteed regardless of drm_dev_enter() state: - connected_to_cpu path: devm_memremap(MEMREMAP_WB). For IORESOURCE_SYSTEM_RAM ranges this takes the try_ram_remap() shortcut, returning __va(offset) from the existing kernel direct map. No new ioremap VA or PAT entry is created, so there is nothing to orphan. - dGPU path: devm_ioremap_wc() registers iounmap() as a devres action, guaranteeing cleanup at device_del() time. Also remove iounmap(aper_base_kaddr) from amdgpu_device_unmap_mmio() since the mapping is now devres-owned. v2: Remove redundant x86_64 guard (Lijo) Fixes: 9d0af8b4def0 ("drm/amdgpu: pre-map device buffer as cached for A+A config") Signed-off-by: Asad Kamal <asad.kamal@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit d871e99879cb5fd1fa798b006b4888887e63a17a) Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 daysdrm/amdgpu: invoke pm_genpd_remove() before freeing genpdCe Sun1-0/+2
commit 28c9b3c5dc35cc790d11e26ca3fc6e068be63998 upstream. Call pm_genpd_remove() to unregister from global list prior to releasing acp_genpd memory, and clear the pointer after free. Signed-off-by: Ce Sun <cesun102@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit cd8650d7a91ee8b768e202354672553faa5cc1f2) Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 daysdrm/amdgpu: fix resource leak on ACP reset timeoutCe Sun1-4/+7
commit 020da7c5aac5b86bad8a1571f6eda6b8cff9331d upstream. When ACP soft reset poll times out, original code returns early without cleanup, leaking MFD child devices, genpd links and all ACP heap allocations. Replace direct early return with goto out to force run all cleanup logic regardless of reset success, preserve timeout error code for caller. Signed-off-by: Ce Sun <cesun102@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 98073e4328d7a8d75d03696ab27f6de70ef1aeda) Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 daysdrm/amdgpu: fix division by zero with invalid uvd dimensionsBoyuan Zhang1-0/+8
commit 0c01c811be47e6b146552dd59bfedbea8f09b8f4 upstream. When width or height is less than 16, width_in_mb or height_in_mb becomes 0, leading to fs_in_mb being 0. This causes a division by zero when calculating num_dpb_buffer in H264 and H264 Perf decode paths. Add validation to reject frames with width < 16 or height < 16 before performing any calculations that depend on these values. V2: Format change - move up all vaiable definitions. V3: Use warn_once to avoid spam. Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 3e41d26c70b0a459d041cc19482a226c4b7423cb) Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 daysdrm/dp_mst: Handle torn-down topology gracefully in ↵Luca Coelho1-1/+3
drm_dp_mst_topology_queue_probe() commit 613059875958e7b217b250ed14c3b189f9488421 upstream. A hotplug or link-loss event can tear down the MST topology (setting mgr->mst_state = false and mgr->mst_primary = NULL) concurrently with a caller invoking drm_dp_mst_topology_queue_probe(). Since the check is already performed under mgr->lock, the condition is not a programming error but a valid race -- the topology was valid when the caller decided to call this function, but was torn down before the lock was acquired. Replace the drm_WARN_ON() with a graceful early return. This eliminates spurious kernel warnings and the resulting compositor crashes observed when connecting/disconnecting DP MST monitors, while keeping the correct behavior of doing nothing when MST is not active. A drm_dbg_mst() trace is added so the skipped probe remains observable under MST debug logging. The existing WARN_ON(mgr->mst_primary) in drm_dp_mst_topology_mgr_set_mst() already catches the case where the topology is initialized twice, so no diagnostic coverage is lost. Fixes: dbaeef363ea5 ("drm/dp_mst: Add a helper to queue a topology probe") Cc: Imre Deak <imre.deak@intel.com> Cc: Lyude Paul <lyude@redhat.com> Cc: stable@vger.kernel.org Cc: intel-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Jonas Emilsson <jonas.emilsson@gmail.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/all/20260503034533.1023686-1-jonas.emilsson@gmail.com Acked-by: Imre Deak <imre.deak@intel.com> Link: https://patch.msgid.link/20260622140532.526722-1-luciano.coelho@intel.com Signed-off-by: Maarten Lankhorst <dev@lankhorst.se> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 daysdrm/amdgpu/vcn4: avoid rereading IB param lengthBoyuan Zhang1-6/+9
commit 3b4082fabc67c9780b06eb959e59dd92fa79c0f0 upstream. Reuse the parameter length returned by vcn_v4_0_enc_find_ib_param() instead of rereading it from the IB. This avoids a potential TOCTOU issue if the IB contents change between reads. Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com> Reviewed-by: David Rosca <david.rosca@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit dbb02b4755f8c1f3773263f2d779872c1c0c073a) Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 daysdrm/amdgpu/vce: fix integer overflow in image sizeBoyuan Zhang1-3/+14
commit 186bfdc4e26d019b2e7570cb121964a1d89b2e5b upstream. Fix a security vulnerability where malicious VCE command streams with oversized dimensions (e.g. 65536×65536) cause 32-bit integer overflow, wrapping the calculated buffer size to 0. This bypasses validation and allows GPU firmware to perform out-of-bound memory access. The fix uses 64-bit arithmetic to detect overflow and rejects invalid dimensions before they reach the hardware. V2: remove redundant check V3: modify max height value V4: remove size64 Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit cbe408dba581755ad1279a487ec786d8927d778d) Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2026-08-06 23:14:12 +0300