| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
commit 82cfd4739011bdc7e87b5d585703427e89ddfaa5 upstream.
When parsing endpoint descriptors, ffs_data_got_descs() generates the
eps_addrmap which contains the endpoint direction. However, epfile->in
was previously only populated in ffs_func_eps_enable() which executes
upon USB host connection. As a result, early userspace ioctls like
FUNCTIONFS_DMABUF_ATTACH that run before the host connects would see
epfile->in as 0, leading to incorrect DMA directions.
By moving the initialization to ffs_epfiles_create(), epfile->in is
accurate before userspace opens the endpoint files.
Fixes: 7b07a2a7ca02 ("usb: gadget: functionfs: Add DMABUF import interface")
Cc: stable <stable@kernel.org>
Assisted-by: Antigravity:gemini-3.1-pro
Signed-off-by: Neill Kapron <nkapron@google.com>
Link: https://patch.msgid.link/20260619040609.4010746-2-nkapron@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7d29f7e9dbd844cae4d3e559cf78324b9642fd6b upstream.
In drivers/infiniband/sw/siw/siw_qp_rx.c, siw_proc_rresp() places each
inbound Read Response DDP segment at sge->laddr + wqe->processed and then
accumulates wqe->processed, but it never checks the running total against
the sink buffer length on continuation segments. siw_check_sge() resolves
and validates the sink memory only on the first fragment (the if (!*mem)
branch), and siw_rresp_check_ntoh() compares the cumulative length against
wqe->bytes only on the final segment (the !frx->more_ddp_segs guard).
A connected siw peer that answers an outstanding RREAD with Read Response
segments that keep the DDP Last flag clear, carrying more total payload
than the RREAD requested, drives wqe->processed past the validated sink
buffer; the next siw_rx_data() call writes out of bounds at
sge->laddr + wqe->processed. siw runs iWARP over ordinary routable TCP,
so the peer is the remote end of an established RDMA connection and needs
no local privilege.
Bound every segment before placement, exactly as siw_proc_send() and
siw_proc_write() already do for their tagged and untagged paths, and
terminate the connection with a base-or-bounds DDP error when the
Read Response would overrun the sink buffer.
This is the second receive-path length fix for this file. A separate
change rejects an MPA FPDU length that underflows the per-fragment
remainder in the header decode; that guard does not cover this case,
because here each individual segment length is self-consistent and only
the accumulated placement offset overruns the buffer.
Fixes: 8b6a361b8c48 ("rdma/siw: receive path")
Link: https://patch.msgid.link/r/20260602194700.2273758-1-michael.bommarito@gmail.com
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 942cd47faa2047b46dfd85745603eba9006973e6 upstream.
When rdma_resolve_addr() is invoked with a broadcast destination on an
IPoIB interface, is_dst_local() inspects the resolved route and
incorrectly concludes that the address is local. As a result, the
resolution fails with -ENODEV.
The issue stems from using '&' to compare rt_type with RTN_LOCAL. The
RTN_* values form a sequential enum, not a bitmask (RTN_LOCAL=2,
RTN_BROADCAST=3). Thus, "rt_type & RTN_LOCAL" yields a non-zero result
for a broadcast route as well.
Replace '&' with '==' when comparing rt_type against RTN_LOCAL.
Link: https://patch.msgid.link/r/20260609-fix-rdma-resolve-addr-v1-1-449b8b4e6c09@nvidia.com
Cc: stable@vger.kernel.org
Fixes: c31e4038c97f ("RDMA/core: Use route entry flag to decide on loopback traffic")
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Vlad Dumitrescu <vdumitrescu@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 963af8d97a8c6a117134a8d0db1415e0489200b1 upstream.
When the server answers an RTRS READ, rdma_write_sg() builds the source
scatter/gather entry for the IB_WR_RDMA_WRITE that returns data to the
peer. Its length is taken directly from the wire descriptor:
plist->length = le32_to_cpu(id->rd_msg->desc[0].len);
rd_msg points into the chunk buffer that the remote peer filled via
RDMA-WRITE-WITH-IMM (rtrs_srv_rdma_done() -> process_io_req() ->
process_read()), so desc[0].len is attacker-controlled and, before this
change, was only rejected when zero. The source address is the fixed
chunk start (dma_addr[msg_id]) and the source lkey is the PD-wide
local_dma_lkey, which is not tied to the chunk's MR mapping, so the verbs
layer does not constrain the transfer length to max_chunk_size. msg_id
and off are bounded against queue_depth and max_chunk_size in
rtrs_srv_rdma_done(), but desc[0].len is a separate field that was not
checked against the chunk size.
A peer that advertises desc[0].len larger than max_chunk_size can make
the posted RDMA write read past the chunk's mapped region. The resulting
behaviour depends on the IOMMU configuration: with no IOMMU or in
passthrough mode the read may extend into memory adjacent to the chunk
and be returned to the peer, which can disclose host memory; with a
translating IOMMU the out-of-range access is expected to fault and abort
the connection. In either case the transfer exceeds what the protocol
permits and is driven by a remote peer.
Reject a descriptor length above max_chunk_size, mirroring the existing
off >= max_chunk_size bound in rtrs_srv_rdma_done(). Legitimate clients
do not exceed it: the client sets desc[0].len to its MR length, which is
capped at the negotiated max_io_size (max_chunk_size - MAX_HDR_SIZE).
Fixes: 9cb837480424 ("RDMA/rtrs: server: main functionality")
Link: https://patch.msgid.link/r/20260612-master-v1-1-70cde5c6fdc9@gmail.com
Reported-by: Yuhao Jiang <danisjiang@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Zhenhao Wan <whi4ed0g@gmail.com>
Reviewed-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit fe938ee497d58c644f6910cfe6ae155f6fb3e523 upstream.
Set maple driver data before calling input_register_device() to
ensure that it is available if the device is opened immediately and
the callback is triggered.
Cc: stable@vger.kernel.org
Assisted-by: Antigravity:gemini-3.5-flash
Tested-by: Florian Fuchs <fuchsfl@gmail.com>
Link: https://patch.msgid.link/akNYib9hQFNN1fA9@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 738f24bbbc95dd50cb4229d1ed62a05f29db2bda upstream.
Set maple driver data before calling input_register_device() to
ensure that it is available if the device is opened immediately and
the callback is triggered.
Cc: stable@vger.kernel.org
Assisted-by: Antigravity:gemini-3.5-flash
Tested-by: Florian Fuchs <fuchsfl@gmail.com>
Link: https://patch.msgid.link/akNXw45L_8bxD6QV@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 536394ec81419b67d9f4f0028812c4372397be1b upstream.
Set maple driver data before calling input_register_device() to
ensure that it is available if the device is opened immediately and
the callback is triggered.
Cc: stable@vger.kernel.org
Assisted-by: Antigravity:gemini-3.5-flash
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit adea84ee6cdea611146c4251d3c1616f5a09feca upstream.
If the touchscreen controller reports a touch ID of 0, the driver
calculates the slot ID as touch->id - 1, which underflows to UINT_MAX.
This is passed to input_mt_slot() as -1.
Since the input core ignores negative slot values, the active slot remains
unchanged. The driver then reports the touch coordinates for the previously
active slot, corrupting its state.
Fix this by rejecting touch reports with ID 0.
Fixes: 07b8481d4aff ("Input: add MELFAS mms114 touchscreen driver")
Cc: stable@vger.kernel.org
Reported-by: sashiko-bot@kernel.org
Assisted-by: Antigravity:gemini-3.5-flash
Link: https://patch.msgid.link/20260704060115.353049-1-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ee89db004238bd0b034f2a6176e175561658750b upstream.
Commit 555c765b0cc2 ("Input: mouse - drop unnecessary calls to
input_set_drvdata") dropped the input_set_drvdata() call in probe
because the data appeared to be unused. However, dc_mouse_open() and
dc_mouse_close() were using maple_get_drvdata(to_maple_dev(&dev->dev)).
This appears to be accessing the data attached to an instance of
maple_device structure, while in reality this actually retrieves driver
data from the input device's embedded struct device (doing invalid
conversion of input device structure to maple device). After
input_set_drvdata() was removed, that lookup started returning NULL and
opening the input device dereferences mse->mdev.
Restore input_set_drvdata() and convert open() and close() to use
input_get_drvdata() so the dependency is no longer hidden.
Fixes: 6b3480855aad ("maple: input: fix up maple mouse driver")
Fixes: 555c765b0cc2 ("Input: mouse - drop unnecessary calls to input_set_drvdata")
Signed-off-by: Florian Fuchs <fuchsfl@gmail.com>
Link: https://patch.msgid.link/20260628230715.2982552-1-fuchsfl@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d86d4f8cbb5a55a3b9b86f7b5ab8c4cdda600a3f upstream.
Commit 44f920069911 ("Input: gscps2 - use guard notation when
acquiring spinlock") moved the receive loop into gscps2_read_data()
and gscps2_report_data().
While moving the code, it preserved the writes to
buffer[ps2port->append], but omitted the following producer index
update from the original loop:
ps2port->append = (ps2port->append + 1) & BUFFER_SIZE;
As a result, append never advances. Since gscps2_report_data() only
reports bytes while act != append, the receive buffer always appears
empty and no keyboard or mouse data reaches the serio core.
Restore the omitted index update.
Fixes: 44f920069911 ("Input: gscps2 - use guard notation when acquiring spinlock")
Cc: stable@vger.kernel.org # 6.13+
Signed-off-by: Xu Rao <raoxu@uniontech.com>
Link: https://patch.msgid.link/460B5655BA580C60+20260624094739.850306-1-raoxu@uniontech.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 66725039f7090afe14c31bd259e2059a68f04023 upstream.
mms114_interrupt() reads a packet of touch data from the device into a
fixed-size on-stack buffer
struct mms114_touch touch[MMS114_MAX_TOUCH];
which holds MMS114_MAX_TOUCH (10) events of MMS114_EVENT_SIZE (8) bytes,
i.e. 80 bytes. The length of the I2C read into it is taken verbatim from
the device:
packet_size = mms114_read_reg(data, MMS114_PACKET_SIZE);
if (packet_size <= 0)
goto out;
...
error = __mms114_read_reg(data, MMS114_INFORMATION, packet_size,
(u8 *)touch);
packet_size is a single device register byte (0x0F) and the only check
is the lower bound packet_size <= 0; it is never bounded against the
size of touch[]. A malfunctioning, malicious or counterfeit controller
(or an attacker tampering with the I2C bus) can report a packet_size of
up to 255, so __mms114_read_reg() writes up to 175 bytes past the end of
touch[] on the IRQ-thread stack: a stack out-of-bounds write that can
overwrite the stack canary, saved registers and the return address.
A well-formed device never reports more than the buffer holds, so reject
an oversized packet and drop the report, consistent with the handler's
other error paths, rather than reading past the buffer.
Fixes: 07b8481d4aff ("Input: add MELFAS mms114 touchscreen driver")
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260612-b4-disp-dc4b8dc4-v1-1-d7cb0a828d92@proton.me
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 478cdd736f2ce3114f90e775d7358136d3977b94 upstream.
tw_interrupt() accumulates each non-zero serial byte into a fixed
three-byte buffer with a running index that is only reset once a full
packet has been received *and* the device's two Y bytes agree:
tw->data[tw->idx++] = data;
if (tw->idx == TW_LENGTH && tw->data[1] == tw->data[2]) {
...
tw->idx = 0;
}
The reset is gated on tw->data[1] == tw->data[2], a value the device
controls. A malicious, malfunctioning or counterfeit Touchwindow
peripheral can stream non-zero bytes whose 2nd and 3rd bytes differ: the
index reaches TW_LENGTH without the equality holding, is never reset, and
keeps growing, so tw->data[tw->idx++] walks off the end of the three-byte
array and the rest of the heap-allocated struct tw, one attacker-chosen
byte at a time -- an unbounded, device-driven heap out-of-bounds write.
Reset the index on every completed packet and report an event only when
the two Y bytes match, like the other serio touchscreen drivers do.
Fixes: 11ea3173d5f2 ("Input: add driver for Touchwin serial touchscreens")
Cc: stable@vger.kernel.org
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Link: https://patch.msgid.link/20260613-b4-disp-69921bfd-v1-1-82c036899959@proton.me
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 856668312685d9a8f32d49a135a89c429d309f81 upstream.
The workaround for XPT2046 clears the command register, giving the
touchscreen controller a NOP. The change incorrectly re-uses the
req->scratch variable which is used as rx_buf for xfer[5], so by
the time xfer[6] occurs, the contents of req->scratch may not be
0. It was found that the touchscreen controller can end up in
a completely unresponsive state due to it being given a command
the driver does not expect.
Instead, rely on the spi_transfer behavior of tx_buf being NULL to
transmit all 0 bits and use the scratch variable for the rx_buf for
both the 1 byte command to and 2 byte response from the controller.
Also relocates the scratch member of struct ser_req to force it
into a different cache line to prevent any potential issues of
DMA stepping on unrelated data in other struct members due to
sharing the same cache line.
This change was tested on real TSC2046 and ADS7843 controllers,
but not the XPT2046 the workaround was originally created for.
Confirming that the original modification to clear the command
register does not impact either real controller.
Fixes: 781a07da9bb94 ("Input: ads7846 - add dummy command register clearing cycle")
Cc: stable@vger.kernel.org
Co-developed-by: Mark Featherston <mark@embeddedTS.com>
Signed-off-by: Mark Featherston <mark@embeddedTS.com>
Signed-off-by: Kris Bahnsen <kris@embeddedTS.com>
Link: https://patch.msgid.link/20260507164943.760009-1-kris@embeddedTS.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a6ac4e24c1a8a533bb61035184fdcc7eede4cc8d upstream.
The MMS134S and MMS136 touch controllers have an event size of 6 bytes
rather than 8 bytes. When __mms114_read_reg() reads the touch data
packet from the device into the touch buffer, the events are packed
tightly at 6-byte intervals. However, the driver iterates through the
events using standard C array indexing (touch[index]), where each
element is sizeof(struct mms114_touch) (8 bytes) apart. As a result, any
touch events beyond the first one are read from incorrect offsets and
parsed improperly.
Fix this by explicitly calculating the byte offset for each touch event
based on the device's specific event size.
Fixes: 53fefdd1d3a3 ("Input: mms114 - support MMS136")
Fixes: ab108678195f ("Input: mms114 - support MMS134S")
Reported-by: sashiko-bot@kernel.org
Assisted-by: Antigravity:gemini-3.5-flash
Reviewed-by: Bryam Vargas <hexlabsecurity@proton.me>
Link: https://patch.msgid.link/20260616050912.1531241-1-dmitry.torokhov@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0e9943d2e4c63496b6ca84bc66fd3c71d40558e2 upstream.
iforce_process_packet() handles a status report (packet id 0x02) by
taking a force-feedback effect index straight from the device wire and
using it to address the per-effect state array:
i = data[1] & 0x7f;
if (data[1] & 0x80) {
if (!test_and_set_bit(FF_CORE_IS_PLAYED,
iforce->core_effects[i].flags))
...
} else if (test_and_clear_bit(FF_CORE_IS_PLAYED,
iforce->core_effects[i].flags)) {
...
}
The index is masked only with 0x7f, so it ranges 0..127, but
core_effects[] holds only IFORCE_EFFECTS_MAX (32) entries. For an index
of 32..127 the test_and_set_bit()/test_and_clear_bit() is an
out-of-bounds single-bit read-modify-write past the array. core_effects[]
is the second-to-last member of struct iforce, so the write lands in the
trailing members and beyond the embedding kzalloc()'d iforce_serio /
iforce_usb object.
data[1] is unvalidated device payload on both transports (the USB
interrupt endpoint and serio), and the status path is not gated on force
feedback being present, so a malicious or counterfeit device can set or
clear a bit at an attacker-chosen offset past the object.
Reject an out-of-range index instead of indexing with it. Bound against
the array dimension IFORCE_EFFECTS_MAX rather than dev->ff->max_effects so
the check guarantees memory safety regardless of how many effects the
device registered. A legitimate "effect started/stopped" status always
carries an index below IFORCE_EFFECTS_MAX, so well-formed devices are
unaffected; the neighbouring mark_core_as_ready() loop is already bounded
and is left untouched.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260613-b4-disp-4828d263-v1-1-02320e1a89dd@proton.me
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5ed62a96e06be4e94b8296b7932afee550a70e04 upstream.
goodix_ts_read_input_report() copies the number of touch points reported
by the device into an on-stack buffer
u8 point_data[2 + GOODIX_MAX_CONTACT_SIZE * GOODIX_MAX_CONTACTS];
which is sized for at most GOODIX_MAX_CONTACTS (10) contacts. The only
runtime check bounds the per-interrupt count against ts->max_touch_num,
but that value is taken verbatim from a 4-bit field of the device
configuration block and is never clamped:
ts->max_touch_num = ts->config[MAX_CONTACTS_LOC] & 0x0f;
The nibble can be 0..15, so a malfunctioning, malicious or counterfeit
controller (or an attacker tampering with the I2C bus) can advertise up
to 15 contacts. goodix_ts_read_input_report() then accepts a touch_num
of up to 15 and the second goodix_i2c_read() writes
ts->contact_size * (touch_num - 1) bytes past the one-contact header into
point_data - up to 30 bytes (45 with the 9-byte report format) beyond the
92-byte buffer: a stack out-of-bounds write.
Clamp max_touch_num to GOODIX_MAX_CONTACTS, the number of contacts
point_data[] is sized for, when reading it from the configuration.
Fixes: a7ac7c95d468 ("Input: goodix - use max touch number from device config")
Cc: stable@vger.kernel.org
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Link: https://patch.msgid.link/20260612-b4-disp-6844625d-v1-1-df0aed080c9d@proton.me
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit df2b818fa009c10ff6ba875a1663ff001cda9558 upstream.
The Elan I2C touchpad driver queries the device for its physical
dimensions and trace counts to calculate the device resolution and width.
However, if the device firmware or device tree provides invalid zero
values for x_traces or y_traces, it results in a fatal division-by-zero
exception leading to a kernel panic during device probe.
Add checks to ensure these parameters are non-zero before performing
the division. If invalid trace values are detected, fall back to a safe
default of 1.
Additionally, prevent an arithmetic underflow in the touch reporting
logic. Previously, if the calculated or fallback width was smaller than
ETP_FWIDTH_REDUCE (90), the subtraction would underflow, resulting in a
massive unsigned integer being reported to userspace. Clamp the adjusted
width to a minimum of 0 to safely handle small physical dimensions and
fallback scenarios.
Completing the probe with safe fallback values ensures the sysfs nodes
are created, keeping the firmware update path intact so a recovery
firmware can be flashed to the device.
Fixes: 6696777c6506 ("Input: add driver for Elan I2C/SMbus touchpad")
Fixes: e3a9a1290688 ("Input: elan_i2c - do not query the info if they are provided")
Signed-off-by: Ranjan Kumar <kumarranja@chromium.org>
Link: https://patch.msgid.link/20260612060339.3829666-1-kumarranja@chromium.org
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d577e46785d45484b2ab7e7309c49b18764bf56c upstream.
rmi_f30_map_gpios() allocates gpioled_key_map with
min(gpioled_count, TRACKSTICK_RANGE_END) == at most 6 entries, but
rmi_f30_attention() iterates the full f30->gpioled_count (device query
register, range 0..31) and dereferences gpioled_key_map[i], and
input->keycodemax is set to the full gpioled_count while input->keycode
points at the 6-entry allocation.
A device that reports gpioled_count > 6 with GPIO support enabled
therefore causes an out-of-bounds read on the attention interrupt and
out-of-bounds read/write through the EVIOCGKEYCODE/EVIOCSKEYCODE ioctls,
which bound the index only against keycodemax. This is the same defect
as the F3A handler, which was copied from F30.
Size the keymap for the full gpioled_count; the mapping loop still
assigns only the first min(gpioled_count, TRACKSTICK_RANGE_END) entries.
Fixes: 3e64fcbdbd10 ("Input: synaptics-rmi4 - limit the range of what GPIOs are buttons")
Cc: stable@vger.kernel.org
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Link: https://patch.msgid.link/20260614-b4-disp-818d6bda-v1-2-cf39a3615085@proton.me
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 57c10915f2c16c90e0d46ad00876bf39ece40fc2 upstream.
rmi_f3a_initialize() takes the GPIO count from the device query register
(f3a->gpio_count = buf & RMI_F3A_GPIO_COUNT, range 0..127).
rmi_f3a_map_gpios() then allocates gpio_key_map with
min(gpio_count, TRACKSTICK_RANGE_END) == at most 6 entries, but
rmi_f3a_attention() iterates the full gpio_count and dereferences
gpio_key_map[i], and input->keycodemax is set to the full gpio_count
while input->keycode points at the 6-entry allocation.
A device that reports gpio_count > 6 therefore causes an out-of-bounds
read of gpio_key_map[] on every attention interrupt, and out-of-bounds
accesses through the input core's default keymap ioctls: EVIOCGKEYCODE
reads past the buffer (leaking adjacent slab memory to user space) and
EVIOCSKEYCODE writes a caller-controlled value past it, for any process
able to open the evdev node, since input_default_getkeycode() and
input_default_setkeycode() only bound the index against keycodemax.
Size the keymap for the full gpio_count. The mapping loop is unchanged:
it still assigns only the first min(gpio_count, TRACKSTICK_RANGE_END)
entries; the remaining slots stay KEY_RESERVED (devm_kcalloc zero-fills)
and are skipped when reporting.
Fixes: 9e4c596bfd00 ("Input: synaptics-rmi4 - add support for F3A")
Cc: stable@vger.kernel.org
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Link: https://patch.msgid.link/20260614-b4-disp-818d6bda-v1-1-cf39a3615085@proton.me
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
registration failure
commit 6251f7d3472c0409e30f8d6a24f10d33d12e3f9a upstream.
If rmi_register_physical_driver() fails, the current error path
unregisters only the RMI bus. The function handlers registered
earlier remain registered with the driver core.
Add a separate error path to unregister the function handlers
before unregistering the bus in this failure case.
Fixes: 2b6a321da9a2 ("Input: synaptics-rmi4 - add support for Synaptics RMI4 devices")
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260610064633.2837084-1-haoxiang_li2024@163.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 10dd1a736d557e310a77117832874729a0175d57 upstream.
A severe livelock and subsequent Hung Task panic were observed in the
i2c-i801 driver during concurrent Fuzzing. The crash is caused by an
unconditional hardware register cleanup in the error handling path of
i801_access().
When i801_check_pre() fails (e.g., returning -EBUSY because the SMBus
controller is actively used by BIOS/ACPI), the kernel does not actually
acquire the hardware ownership. However, the code jumps to the 'out'
label and executes:
iowrite8(SMBHSTSTS_INUSE_STS | STATUS_FLAGS, SMBHSTSTS(priv));
This forcefully clears the INUSE_STS lock and resets the hardware status
flags without owning the controller. Doing so interrupts ongoing BIOS/ACPI
transactions and totally corrupts the SMBus hardware state machine.
Consequently, all subsequent i801_access() calls fail at the pre-check
stage, triggering an endless stream of "SMBus is busy, can't use it!"
error logs. Over a slow serial console, this printk flood monopolizes
the CPU (Console Livelock), starving other processes trying to acquire
the mmap_lock down_read semaphore, ultimately triggering the hung task
watchdog.
Fix this by moving the 'out' label below the hardware register cleanup.
If i801_check_pre() fails, we safely bypass the iowrite8() and only
release the software locks (pm_runtime and mutex), strictly adhering to
the rule of not releasing resources that were never acquired.
Fixes: 1f760b87e54c ("i2c: i801: Call i801_check_pre() from i801_access()")
Signed-off-by: Mingyu Wang <25181214217@stu.xidian.edu.cn>
Cc: <stable@vger.kernel.org> # v6.3+
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260512093534.348655-1-w15303746062@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 218cfe364b55b2768221629bd4a69ad190b7fbbc upstream.
On some i.MX platforms, certain I2C client drivers keep a periodic
workqueue which continues to trigger I2C transfers.
During system suspend/resume, there exists a time window between:
- suspend_noirq and the system entering suspend
- the system starting to resume and resume_noirq
In this window, the I2C controller resources such as clock and pinctrl
may already be disabled or not yet restored.
If a workqueue triggers an I2C transfer in this period, the driver
attempts to access I2C registers while the hardware resources are
unavailable, which may lead to system hang.
Mark the I2C adapter as suspended during noirq suspend and block new
transfers until resume, ensuring that I2C transfers are only issued
when hardware resources are available.
Fixes: 1ee867e465c1 ("i2c: imx-lpi2c: add target mode support")
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Cc: <stable@vger.kernel.org> # v6.14+
Acked-by: Mukesh Savaliya <mukesh.savaliya@oss.qualcomm.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260525031450.3183421-1-carlos.song@oss.nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 111bb7f9f4a90b32e495d70a607c67b137f3074a upstream.
stm32f7_i2c_compute_timing() derives the I2C clock source period
(i2cclk) with DIV_ROUND_CLOSEST, which may round it up. When the
period is overestimated, all timings computed from it (SCLDEL,
SDADEL, SCLL, SCLH) come out shorter on the wire than calculated,
and the resulting bus rate can exceed the requested speed, violating
the I2C specification minimums for tLOW and tHIGH.
For example, with a 104.45 MHz clock source (e.g. PCLK1, the
reset-default I2C clock source on STM32MP1), i2cclk is rounded from
9.574 ns up to 10 ns. Requesting a 400 kHz fast mode bus with
72/27 ns rise/fall times and no analog/digital filters then produces
an actual bus rate of 415.6 kHz with tLOW = 1254 ns, violating both
the 400 kHz maximum rate and the 1300 ns tLOW minimum of the
specification.
Truncate the period instead, so that it can only be underestimated.
The error then falls on the safe side: the programmed timings come
out slightly longer than computed and the bus runs marginally below
the target rate (375.3 kHz in the example above) while meeting the
specification.
i2cbus is left rounded-to-closest: it is only used as the target of
the clk_error comparison and is never multiplied into the programmed
timings, so nearest rounding remains accurate there.
Fixes: aeb068c57214 ("i2c: i2c-stm32f7: add driver")
Signed-off-by: Guillermo Rodríguez <guille.rodriguez@gmail.com>
Cc: <stable@vger.kernel.org> # v4.14+
Acked-by: Alain Volmat <alain.volmat@foss.st.com>
Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@foss.st.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260611104857.242153-1-guille.rodriguez@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e43f32816a1b1fe5a86279411626fe3a9be56d45 upstream.
davinci_i2c_probe() registers a cpufreq transition notifier before adding
the I2C adapter. If i2c_add_numbered_adapter() fails, the probe error path
releases the device resources without unregistering the notifier.
Add a dedicated error path to unregister the cpufreq notifier after
i2c_add_numbered_adapter() fails.
Fixes: 82c0de11b734 ("i2c: davinci: Add cpufreq support")
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Cc: <stable@vger.kernel.org> # v2.6.36+
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260610030513.2651018-1-haoxiang_li2024@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2e9a7f68329be41792c0b123c28e6c53c2fa2249 upstream.
At first glance the harmless cleanup of the driver does nothing bad.
However, as the operator precedence list states the '*' (multiplication)
and '/' division operators have order 5 with left-to-right associativity
the *= has order 17 and associativity right-to-left. It wouldn't be
a problem to replace
foo = foo * HZ / 1000000;
with
foo *= HZ / 1000000;
if HZ constant is in Hertz. The problem is that in the Linux kernel HZ is
defined in jiffy units, which is order of magnitude smaller than a million.
That's why operator precedence has a crucial role here. Fix the regression
by reverting pre-optimized calculations.
Fixes: be40a3ae719f ("i2c: mpc: Use of_property_read_u32 instead of of_get_property")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: <stable@vger.kernel.org> # v6.4+
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260618144934.3249950-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b1a58ed9eab146b36f41a55db8f5d7ce9fdedf3f upstream.
Adapters can be looked up by their id using i2c_get_adapter() which
takes a reference to the embedded struct device.
Remove the adapter from the IDR before tearing it down during
deregistration (and on registration failure) to make sure its resources
are not accessed after having been freed (e.g. the device name).
Fixes: 35fc37f81881 ("i2c: Limit core locking to the necessary sections")
Cc: stable@vger.kernel.org # 2.6.31
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 07d5fb537928aad4369aaff0cbae73ba38a719af upstream.
Clients can be registered from bus notifier callbacks so the debugfs
directory needs to be created before registering the adapter as clients
use that directory as their debugfs parent.
Move debugfs creation before adapter registration to avoid having
clients create their debugfs directories in the debugfs root (which is
also more likely to fail due to name collisions).
Note that failure to allocate the adapter name must now be handled
explicitly as debugfs_create_dir() cannot handle a NULL name (unlike
device_add() which returns an error).
Fixes: 73febd775bdb ("i2c: create debugfs entry per adapter")
Cc: stable@vger.kernel.org # 6.8
Cc: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 158efa411c57111d87bf265a3776614f32d70007 upstream.
Drivers must not probe defer after having registered devices as that
will trigger a probe loop if the devices bind to a driver (cf. commit
fbc35b45f9f6 ("Add documentation on meaning of -EPROBE_DEFER")).
Move the recovery initialisation, where the GPIO lookup may fail, before
registering the adapter to prevent this.
Fixes: 75820314de26 ("i2c: core: add generic I2C GPIO recovery")
Cc: stable@vger.kernel.org # 5.9
Cc: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2295d2bb101faa663fbc45fadbb3fec45f107441 upstream.
If adapter registration ever fails the release callback would trigger a
NULL-pointer dereference as the completion struct has not been
initialised.
Note that before the offending commit this would instead have resulted
in a minor memory leak of the adapter name.
Fixes: 3f8c4f5e9a57 ("i2c: core: fix reference leak in i2c_register_adapter()")
Cc: stable@vger.kernel.org
Cc: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8ce19524e4cc2462685f596a6402fbd8fb984ab2 upstream.
Make sure to tear down the host notify irq domain on adapter
registration failure to avoid leaking it.
This issue was flagged by Sashiko when reviewing another adapter
registration fix.
Fixes: 4d5538f5882a ("i2c: use an IRQ to report Host Notify events, not alert")
Cc: stable@vger.kernel.org # 4.10
Cc: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit fc3b071a7c8dc0f5d56defddf6e6fd5aaa3e1e27 upstream.
afu_ioctl_dma_map() accepts a 64-bit length from userspace via
DFL_FPGA_PORT_DMA_MAP ioctl without an upper bound check. The value
is passed to afu_dma_pin_pages() where npages is derived as
length >> PAGE_SHIFT and passed to pin_user_pages_fast() which takes
int nr_pages, causing implicit truncation if length is very large.
Validate map.length at the ioctl entry point before calling
afu_dma_map_region(), rejecting values whose page count exceeds
INT_MAX.
Fixes: fa8dda1edef9 ("fpga: dfl: afu: add DFL_FPGA_PORT_DMA_MAP/UNMAP ioctls support")
Cc: stable@vger.kernel.org
Signed-off-by: Sebastian Alba Vives <sebasjosue84@gmail.com>
Reviewed-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20260518190742.61426-3-sebasjosue84@gmail.com
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 504e2b4ab97a51d56d966cd36d0997ad30b65b2d upstream.
When CONFIG_DMA_API_DEBUG_SG is enabled, importing a udmabuf into a DRM
driver (e.g. amdgpu for video playback in GNOME Videos / Showtime)
triggers a spurious warning:
DMA-API: amdgpu 0000:03:00.0: cacheline tracking EEXIST, \
overlapping mappings aren't supported
WARNING: kernel/dma/debug.c:619 at add_dma_entry+0x473/0x5f0
The call chain is:
amdgpu_cs_ioctl
-> amdgpu_ttm_backend_bind
-> dma_buf_map_attachment
-> [udmabuf] map_udmabuf -> get_sg_table
-> dma_map_sgtable(dev, sg, direction, 0) // attrs=0
-> debug_dma_map_sg -> add_dma_entry -> EEXIST
This happens because udmabuf builds a per-page scatter-gather list via
sg_set_folio(). When begin_cpu_udmabuf() has already created an sg
table mapped for the misc device, and an importer such as amdgpu maps
the same pages for its own device via map_udmabuf(), the DMA debug
infrastructure sees two active mappings whose physical addresses share
cacheline boundaries and warns about the overlap.
The DMA_ATTR_SKIP_CPU_SYNC flag suppresses this check in
add_dma_entry() because it signals that no CPU cache maintenance is
performed at map/unmap time, making the cacheline overlap harmless.
All other major dma-buf exporters already pass this flag:
- drm_gem_map_dma_buf() passes DMA_ATTR_SKIP_CPU_SYNC
- amdgpu_dma_buf_map() passes DMA_ATTR_SKIP_CPU_SYNC
The CPU sync at map/unmap time is also redundant for udmabuf:
begin_cpu_udmabuf() and end_cpu_udmabuf() already perform explicit
cache synchronization via dma_sync_sgtable_for_cpu/device() when CPU
access is requested through the dma-buf interface.
Pass DMA_ATTR_SKIP_CPU_SYNC to dma_map_sgtable() and
dma_unmap_sgtable() in udmabuf to suppress the spurious warning and
skip the redundant sync.
Fixes: 284562e1f348 ("udmabuf: implement begin_cpu_access/end_cpu_access hooks")
Cc: stable@vger.kernel.org
Signed-off-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Acked-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Link: https://patch.msgid.link/20260331061657.79983-1-mikhail.v.gavrilov@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit fb7b1a0ab25a6077d26cb3829e31743972d4f31d upstream.
begin_cpu_udmabuf() maps the sg_table with the caller-provided direction
(e.g., DMA_TO_DEVICE for a write-only sync), and caches it in ubuf->sg
for reuse. However, release_udmabuf() always unmaps this sg_table with
a hardcoded DMA_BIDIRECTIONAL, regardless of the direction that was
originally used for the mapping.
With CONFIG_DMA_API_DEBUG=y this produces:
DMA-API: misc udmabuf: device driver frees DMA memory with different
direction [device address=0x000000044a123000] [size=4096 bytes]
[mapped with DMA_TO_DEVICE] [unmapped with DMA_BIDIRECTIONAL]
The issue was found during video playback when GStreamer performed a
write-only DMA_BUF_IOCTL_SYNC on a udmabuf. It can be reproduced
with CONFIG_DMA_API_DEBUG=y by creating a udmabuf from a memfd,
performing a write-only sync (DMA_BUF_SYNC_WRITE without
DMA_BUF_SYNC_READ), and closing the file descriptor.
Fix this by storing the DMA direction used when the sg_table is first
created in begin_cpu_udmabuf(), and passing that same direction to
put_sg_table() in release_udmabuf().
Fixes: 284562e1f348 ("udmabuf: implement begin_cpu_access/end_cpu_access hooks")
Cc: stable@vger.kernel.org
Signed-off-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Reviewed-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Link: https://patch.msgid.link/20260314232722.15555-1-mikhail.v.gavrilov@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4d70986002f2f3eaaed89124fb2522bded38b016 upstream.
iommufd_hwpt_invalidate() takes a user-controlled entry_num and entry_len,
each bounded only by U32_MAX. An entry_len beyond the kernel's struct size
makes the copy helper verify the extra bytes are zero, scanning that excess
in one uninterruptible pass; a multi-gigabyte value over zeroed user memory
trips the soft-lockup watchdog.
A large entry_num is the other half, driving the backend invalidation loop
with no reschedule. The VT-d nested handler, for one, copies each entry and
flushes caches per iteration, pinning the CPU on a non-preemptible kernel.
Cap both in the ioctl. entry_len is held under PAGE_SIZE, above any request
struct, and entry_num under 1 << 19, the order of a hardware invalidation
queue and well beyond any real batch, bounding the per-call loop length.
Fixes: 8c6eabae3807 ("iommufd: Add IOMMU_HWPT_INVALIDATE")
Link: https://patch.msgid.link/r/447fa93663f7526eb361719e83fa8b649464483d.1780521606.git.nicolinc@nvidia.com
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 091ab6d70dc444f56ed14faedbcacfc979f4c613 upstream.
The cookie returned by xa_alloc() in iommufd_fault_fops_read() is per fault
group, but the inner copy_to_user() runs per fault inside the group. If a
copy fails mid-group, xa_erase clears the cookie and the group is restored
to the deliver list, yet done is not rolled back. The function returns the
partial byte count, with the successfully copied faults sitting at offsets
below done carrying the now-erased cookie. The next read() then re-fetches
the group, allocates a fresh cookie, and re-delivers every fault including
the ones already copied; userspace sees duplicates carrying the new cookie,
and a stale cookie that can never be responded to.
Use a local group_done variable that tracks the per-group progress inside
the inner loop, and only commit done = group_done after the inner loop has
finished successfully. On a copy_to_user failure the outer break skips the
commit, so done remains at its prior start-of-group baseline; the partial
bytes already written past done are undefined to userspace per the read(2)
contract, and the next read re-delivers the whole group atomically.
Fixes: 07838f7fd529 ("iommufd: Add iommufd fault object")
Link: https://patch.msgid.link/r/360cab4d4aeccb0bae275a970e2b3c340a71e0e0.1780343944.git.nicolinc@nvidia.com
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Pranjal Shrivastava <praan@google.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 172fc8b19825a0f5884c38f2289188284e2d45ee upstream.
On a copy_to_user() failure inside the inner list_for_each_entry, only the
inner loop breaks; the outer while re-fetches the just-restored fault group
and retries the failing copy_to_user() forever, spinning the reader at 100%
CPU with fault->mutex held.
Check rc after the inner loop and break the outer while as well.
Fixes: 07838f7fd529 ("iommufd: Add iommufd fault object")
Link: https://patch.msgid.link/r/336a9b6e44fe66a24199d3be777c405c85c98622.1780343944.git.nicolinc@nvidia.com
Cc: stable@vger.kernel.org
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Pranjal Shrivastava <praan@google.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 47916a54eeb2a9e654512ee609f71bd5b29db702 upstream.
The read count must be large enough to hold one fault or a group's faults.
iommufd_fault_fops_read() does not validate the count, but returns 0 as if
the read had succeeded while leaving the pending fault in the queue.
Return -EINVAL in the undersize cases.
Fixes: 07838f7fd529 ("iommufd: Add iommufd fault object")
Link: https://patch.msgid.link/r/85c118a606fbedc5c132a1f5ec223a5ba23b92d2.1780343944.git.nicolinc@nvidia.com
Cc: stable@vger.kernel.org
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Pranjal Shrivastava <praan@google.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 00203ca8323f9714630408c19a209b52397975e6 upstream.
The read count must be large enough to hold a vEVENT header. For a normal
vEVENT, it must also hold the trailing data following the header.
iommufd_veventq_fops_read() does not validate the count, but returns 0 as
if the read had succeeded while leaving the pending event in the queue.
Return -EINVAL in both undersize cases.
Fixes: e36ba5ab808e ("iommufd: Add IOMMUFD_OBJ_VEVENTQ and IOMMUFD_CMD_VEVENTQ_ALLOC")
Link: https://patch.msgid.link/r/e1111adcc8a8882fbfd84accd6674dc846dc5689.1780343944.git.nicolinc@nvidia.com
Cc: stable@vger.kernel.org
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Pranjal Shrivastava <praan@google.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 01e41ad76c12ae5c49ab4ef4fc7dd54e9b8784d6 upstream.
When the first event copy fails, rc = -EFAULT will not be reported as done
is set to the length of the copied header.
Rewind it to report rc correctly.
Fixes: e36ba5ab808e ("iommufd: Add IOMMUFD_OBJ_VEVENTQ and IOMMUFD_CMD_VEVENTQ_ALLOC")
Link: https://patch.msgid.link/r/78f8caeb6a5d667a26b870e3068cec47dd4b5be1.1780343944.git.nicolinc@nvidia.com
Cc: stable@vger.kernel.org
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Pranjal Shrivastava <praan@google.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6ebf2eb46fbd5b40393ff8fbb847ba96925beaff upstream.
iommufd_veventq_alloc() accepts any !0 veventq_depth from userspace, with
an upper bound at U32_MAX.
This leaves a vulnerability where userspace can allocate excessively large
queues to exhaust kernel memory reserves.
Cap the veventq_depth (maximum number of entries) to 1 << 19, matching the
maximum number of entries in the SMMUv3 EVTQ (the largest use case today).
Fixes: e36ba5ab808e ("iommufd: Add IOMMUFD_OBJ_VEVENTQ and IOMMUFD_CMD_VEVENTQ_ALLOC")
Link: https://patch.msgid.link/r/8426cbaa5e8294472ec7f076ef427cc473be5985.1779408671.git.nicolinc@nvidia.com
Cc: stable@vger.kernel.org
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 85345becfead3255a5f875d4b4d82ea01d926239 upstream.
kzalloc_flex() computes the allocation size. With event_data typed as u64,
data_len is interpreted as a u64 element count. Yet, every caller and the
read path treat data_len as a byte count. The current code over-allocates
by sizeof(u64) and the __counted_by() annotation overstates the length by
the same factor.
Re-type event_data as u8. No functional change in user-visible behavior.
Fixes: e36ba5ab808e ("iommufd: Add IOMMUFD_OBJ_VEVENTQ and IOMMUFD_CMD_VEVENTQ_ALLOC")
Link: https://patch.msgid.link/r/f7665f839b9dce917d6bd394375a1cf56568d86b.1779408671.git.nicolinc@nvidia.com
Cc: stable@vger.kernel.org
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit be93d186ae88a92e7aa77e122d4e661fa57b1e39 upstream.
The bound-check in iommufd_veventq_fops_read() for the normal vEVENT
path uses sizeof(hdr) where the surrounding code uses sizeof(*hdr):
if (!vevent_for_lost_events_header(cur) &&
sizeof(hdr) + cur->data_len > count - done) {
hdr is declared as struct iommufd_vevent_header *, so sizeof(hdr)
evaluates to the size of the pointer. Surrounding code uses
sizeof(*hdr) consistently:
if (done >= count || sizeof(*hdr) > count - done) {
...
if (copy_to_user(buf + done, hdr, sizeof(*hdr))) {
...
done += sizeof(*hdr);
struct iommufd_vevent_header is currently 8 bytes (two __u32 fields,
flags and sequence), so on 64-bit (sizeof(void *) == 8) the two
expressions happen to be equal and the check works as intended.
On 32-bit (sizeof(void *) == 4) the check under-counts the header by
4 bytes: a vEVENT whose data_len causes 8 + cur->data_len to exceed
count - done while 4 + cur->data_len does not will pass the check,
then the loop will copy_to_user 8 bytes of header followed by data_len
bytes of payload, writing past the user-supplied buffer.
It is also a latent bug for any future expansion of struct
iommufd_vevent_header beyond sizeof(void *) on 64-bit; the check
should not depend on the type happening to match the host pointer
width.
Use sizeof(*hdr) to match the rest of the function and the actual
amount that will be copied.
Fixes: e36ba5ab808e ("iommufd: Add IOMMUFD_OBJ_VEVENTQ and IOMMUFD_CMD_VEVENTQ_ALLOC")
Link: https://patch.msgid.link/r/20260430175630.67078-1-kai.aizen.dev@gmail.com
Cc: stable@vger.kernel.org
Reported-by: Kai Aizen <kai.aizen.dev@gmail.com>
Signed-off-by: Kai Aizen <kai.aizen.dev@gmail.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 69fe699afe1afcb730164b86c228483c2da05f94 upstream.
We have observed multiple full invalidations occurring during device
detach when we are done using the vfio-device.
blocked_domain_attach_device()
-> detach_device()
-> amd_iommu_domain_flush_all()
-> amd_iommu_domain_flush_pages(..., CMD_INV_IOMMU_ALL_PAGES_ADDRESS)
while (size != 0) {
-> __domain_flush_pages( flush_size /* power of 2 flush_size */)
-> domain_flush_pages_v1()
-> build_inv_iommu_pages()
-> build_inv_address()
}
build_inv_address() will trigger a full invalidation if the chunk
size > (1 << 51). Consequently, the guest will issue multiple full
invalidations for a single call to amd_iommu_domain_flush_all()
Without this patch, we will see 10 time instead of 1 time full
invalidations for every amd_iommu_domain_flush_all().
Cc: stable@vger.kernel.org
Fixes: a270be1b3fdf ("iommu/amd: Use only natural aligned flushes in a VM")
Suggested-by: Josef Bacik <josef@toxicpanda.com>
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Weinan Liu <wnliu@google.com>
Reviewed-by: Wei Wang <wei.w.wang@hotmail.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Samiullah Khawaja <skhawaja@google.com>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 534b5f98ab7319d8004bbc7dab6481462243e883 upstream.
The Intel IOMMU driver allows SVA on devices even if they do not support
PCI/PRI. Commit 39c20c4e83b9 ("iommu/vt-d: Only handle IOPF for SVA when
PRI is supported") modified the SVA bind path to allow this configuration
by skipping IOPF enablement when PRI is missing. However, it failed to
update the unbind path.
This creates an imbalance: the unbind path attempts to disable IOPF for
a device that never had it enabled, triggering a WARNING in
intel_iommu_disable_iopf():
WARNING: drivers/iommu/intel/iommu.c:3475 at intel_iommu_disable_iopf+0x4f/0x90d
Call Trace:
<TASK>
blocking_domain_set_dev_pasid+0x50/0x70
iommu_detach_device_pasid+0x89/0xc0
iommu_sva_unbind_device+0x73/0x150
xe_vm_close_and_put+0x4d2/0x1200 [xe]
Fix this by bypassing IOPF operations for SVA domains on non-PRI hardware
in both the bind and unbind paths.
Fixes: 39c20c4e83b9 ("iommu/vt-d: Only handle IOPF for SVA when PRI is supported")
Cc: stable@vger.kernel.org
Reported-by: Nareshkumar Gollakoti <naresh.kumar.g@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20260519052917.3729796-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit af3d1bb9a09daf928fc3f173689fb7904d6a6d4f upstream.
The loongson-rng rng_alg has several vulnerabilities, including not
providing forward security, and a use-after-free bug due to the use of
wait_for_completion_interruptible().
Meanwhile, the rng_alg framework doesn't really have any purpose in the
first place other than to access the software algorithms crypto/drbg.c
and crypto/jitterentropy.c. Hardware-specific rng_algs have no
in-kernel user, and unlike hwrng there's no feed into the actual Linux
RNG. As such, there's really no point to this code. There are of
course other rng_alg drivers that are similarly unused, but they're
similarly in the process of being phased out, e.g.
https://lore.kernel.org/r/20260529193648.18172-1-ebiggers@kernel.org and
https://lore.kernel.org/r/20260529220430.34135-1-ebiggers@kernel.org
Given that, there's no point in fixing forward these vulnerabilities,
and it makes much more sense to simply roll back the addition of this
driver. If this platform provides TRNG (not PRNG) functionality, it
could make sense to add a hwrng driver, but it would be quite different.
Link: https://lore.kernel.org/linux-crypto/20260525145939.GC2018@quark/
Fixes: 766b2d724c8d ("crypto: loongson - add Loongson RNG driver support")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit fcba26efe5efc7441f5505f4ccc69791214b40be upstream.
ntb_epf_init_isr() requests multiple MSI/MSI-X vectors in a loop. If
request_irq() fails part-way through, it jumps straight to
pci_free_irq_vectors() without freeing already requested IRQs.
Fix the error path by freeing any successfully requested IRQs before
releasing the vectors.
Fixes: 812ce2f8d14e ("NTB: Add support for EPF PCI Non-Transparent Bridge")
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Cc: stable@vger.kernel.org # v5.12+
Link: https://patch.msgid.link/20260304083028.1391068-2-den@valinux.co.jp
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3c7e164344e5bcf6f274bbf59a3274f5caad9bc1 upstream.
Clients may be registered from bus notifier callbacks when the adapter
is registered. On a subsequent error during registration, the adapter
references taken by such clients prevent the wait for the references to
be released from ever completing.
Fix this by refactoring client deregistration and deregistering also on
late adapter registration failures.
Fixes: f8756c67b3de ("i2c: core: call of_i2c_setup_smbus_alert in i2c_register_adapter")
Cc: stable@vger.kernel.org # 4.15
Cc: Phil Reid <preid@electromag.com.au>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit fa11039d6cdff84584a3ef8cc1f5e1b56e045da2 upstream.
scmi_regulator_probe() calls of_find_node_by_name() which takes a
reference on the returned device node. On the error path where
process_scmi_regulator_of_node() fails, the function returns without
calling of_node_put() on the child node, leaking the reference.
Add of_node_put(np) on the error path to properly release the
reference.
Cc: stable@vger.kernel.org
Fixes: 0fbeae70ee7c ("regulator: add SCMI driver")
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Link: https://patch.msgid.link/20260527104850.872415-1-vulab@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 14ca4868886f2188401fe06cd7bf01a330b3fb99 upstream.
After discussion with the devicetree maintainers we agreed to not extend
lists with the generic compatible "apple,wdt" anymore [1]. Use
"apple,t8103-wdt" as base compatible as it is the SoC the driver and
bindings were written for.
[1]: https://lore.kernel.org/asahi/12ab93b7-1fc2-4ce0-926e-c8141cfe81bf@kernel.org/
Fixes: 4ed224aeaf66 ("watchdog: Add Apple SoC watchdog driver")
Cc: stable@vger.kernel.org
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Janne Grunau <j@jannau.net>
Link: https://lore.kernel.org/r/20251231-watchdog-apple-t8103-base-compat-v1-1-1702a02e0c45@jannau.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e360a6d65bb46c527a5909430a31d640cdd5036e upstream.
ADXL is not present in Coreboot- or Slimbootloader-based BIOSes and as
result, the driver fails to probe there.
Since commit 2738c69a8813 ("EDAC/i10nm: Add driver decoder for Ice Lake
and Tremont CPUs"), i10nm_edac supports driver decoder. Switch to driver
decoding when ADXL is not present.
Signed-off-by: Vasily Khoruzhick <vasilykh@arista.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Cc: stable@vger.kernel.org # v6.1+
Link: https://patch.msgid.link/20260414181735.87023-1-anarsoul@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
