| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
commit d1e280334b7f0a1df441e08bd1f6a1bcc36b3bbb upstream.
There is no good reason to have wBytesPerInterval < wMaxPacketSize -
either one is too low or the other too high, and we may want to warn
about such descriptors. Start with cleaning up our own root hubs.
USB 3.2 section 10.15.1 sets wMaxPacketSize and wBytesPerInterval of
SuperSpeed hub status endpoints at 2 bytes, so reduce wMaxPacketSize
from its former value of 4, which was derived from USB 2.0 spec and
the kernel's USB_MAXCHILDREN limit. They don't apply because USB 3.2
10.15.2.1 specifies SuperSpeed hubs to have up to 15 ports.
Suggested-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Link: https://patch.msgid.link/20260518073121.7bc1da0f.michal.pecio@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 928abe19fbf0127003abcb1ea69cabc1c897d0ab ]
A DIRECTORY entry's value field is used as the dir_offset for a
recursive call into __tb_property_parse_dir() with no depth counter.
A crafted peer that chains DIRECTORY entries into a back-reference
loop drives the parser until the kernel stack is exhausted and the
guard page fires. Any untrusted XDomain peer (cable, dock, in-line
inspector, adjacent host) that reaches the PROPERTIES_REQUEST
control-plane exchange can trigger this without authentication.
Thread a depth counter through tb_property_parse() and
__tb_property_parse_dir(), and reject blocks that exceed
TB_PROPERTY_MAX_DEPTH = 8. That is comfortably larger than any
observed legitimate XDomain layout.
Operators who do not need XDomain host-to-host discovery can disable
the path entirely with thunderbolt.xdomain=0 on the kernel command
line.
Fixes: cdae7c07e3e3 ("thunderbolt: Add support for XDomain properties")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-6
Assisted-by: Codex:gpt-5-4
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 3549a9649dc7c5fc586ab12f675279283cdcb2a7 ]
We are observing following warnings:
*ERROR* power well DC_off state mismatch (refcount 0/enabled 1)
gen9_dc_off_power_well_enabled is considering target state DC_STATE_DISABLE
as DC_OFF power well being enabled. Fix this by using wakeref for the
purpose.
To achieve this we need to modify notification code as well. Currently it
is possible that PSR gets notified vblank enable/disable twice on same
status. This is currently not a problem as it is just triggering call to
intel_display_power_set_target_dc_state with same target state as a
parameter. When using wakeref this becomes a problem due to reference
counting. Fix this storing vbank status on last notification and use that
to ensure there are no more than one notification with same vblank status.
v2: ensure there is no subsequent notifications with same status
Fixes: aa451abcffb5 ("drm/i915/display: Prevent DC6 while vblank is enabled for Panel Replay")
Cc: <stable@vger.kernel.org> # v6.13+
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Michał Grzelak <michal.grzelak@intel.com>
Link: https://patch.msgid.link/20260520104944.239797-2-jouni.hogander@intel.com
(cherry picked from commit 35485ac56d878192a3829a58cb26503125ec7104)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c58e9456e30c7098cbcd9f04571992be8a2e4e63 upstream.
The active_req field serves double duty as both the "is a TX in
flight" flag (NULL means idle) and the storage for the in-flight
message pointer. When a client sends NULL via mbox_send_message(),
active_req is set to NULL, which the framework misinterprets as
"no active request". This breaks the TX state machine by:
- tx_tick() short-circuits on (!mssg), skipping the tx_done
callback and the tx_complete completion
- txdone_hrtimer() skips the channel entirely since active_req
is NULL, so poll-based TX-done detection never fires.
Fix this by introducing a MBOX_NO_MSG sentinel value that means
"no active request," freeing NULL to be valid message data. The
sentinel is defined in the subsystem-internal mailbox.h so that
controller drivers within drivers/mailbox/ can reference it, but
it is not exposed to clients outside the subsystem.
Fifteen in-tree callers send NULL (doorbell-style IPCs on Qualcomm,
Tegra, TI, Xilinx, i.MX, SCMI, and PCC platforms). All were
audited for regression:
- Most already work around the bug via knows_txdone=true with a
manual mbox_client_txdone() call, making the framework's
tracking irrelevant. These are unaffected.
- Poll-based callers (Xilinx zynqmp/r5) are strictly better off:
the poll timer now correctly detects NULL-active channels
instead of silently skipping them.
- irq-qcom-mpm.c was a pre-existing bug -- the only Qualcomm
caller that omitted the knows_txdone + mbox_client_txdone()
pattern. Fixed in a companion commit ("irqchip/qcom-mpm: Fix
missing mailbox TX done acknowledgment").
- No caller sets both a tx_done callback and sends NULL, nor
combines tx_block=true with NULL sends, so the newly reachable
callback/completion paths are never exercised.
Also update tegra-hsp's flush callback, which directly inspects
active_req to wait for the channel to drain: the old "!= NULL"
check becomes "!= MBOX_NO_MSG", otherwise flush spins until
timeout since the sentinel is non-NULL.
The only tradeoff is that 'MBOX_NO_MSG' can not be used as a message
by clients.
Reported-by: Joonwon Kang <joonwonkang@google.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Signed-off-by: Joonwon Kang <joonwonkang@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 5a4c828b8b29b47534814ade26d9aee09d5101fc ]
When a USB device is unplugged from the dual-role port, the device-mode
path in tegra_xhci_id_work() explicitly clears both SS and HS port power
via direct hub_control ClearPortFeature(POWER) calls. This preempts the
xHCI controller's normal disconnect processing -- PORT_CSC is never
generated, the USB core never sees the disconnect, and the device remains
in its internal tree as a ghost visible in lsusb.
Add an otg_set_port_power flag to control whether the dual-role switch
path performs explicit port power management. SoCs that need it
(Tegra124 / Tegra210 / Tegra186) set the flag; later SoCs (Tegra194 and
beyond) rely on the PHY mode change to handle disconnect naturally and
skip all port power calls.
Within the port power path, otg_reset_sspi additionally gates the SSPI
reset sequence on host-mode entry for SoCs that require it.
Flags set per SoC:
Tegra124, Tegra186 -> otg_set_port_power
Tegra210 -> otg_set_port_power, otg_reset_sspi
Tegra194 and later -> (none)
[ Backport to 6.18.y: keep the host-mode snapshot in the existing
tegra->lock section, retain pm_runtime_mark_last_busy() in the host
port-power path, preserve str_on_off(), and resolve context around the
SoC ops/Tegra234 entries. ]
Fixes: f836e7843036 ("usb: xhci-tegra: Add OTG support")
Cc: stable@vger.kernel.org
Signed-off-by: Wei-Cheng Chen <weichengc@nvidia.com>
Link: https://patch.msgid.link/20260505112630.217704-1-weichengc@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e027c218c482c6a0ae1948129ccda3b0a2033368 ]
LAN8814 QSGMII soft reset was moved into the probe function to avoid
triggering it for each of 4 PHY-s in the package.
However, that broke QSGMII link between the MAC and PHY on most LAN8814
PHY-s, specificaly for us on the Microchip LAN969x switch.
Reading the QSGMII status registers it was visible that lanes were only
partially synced.
It looks like the reset timing is crucial, so lets move the reset back
into the .config_init function but guard it with phy_package_init_once()
to avoid it being triggered on each of 4 PHY-s in the package.
Change the probe function to use phy_package_probe_once() for coma and PtP
setup.
Fixes: 96a9178a29a6 ("net: phy: micrel: lan8814 fix reset of the QSGMII interface")
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Link: https://patch.msgid.link/20260428134138.1741253-1-robert.marko@sartura.hr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit bab8c6fb5af8df7e753d196c1262cb78e92ca872 ]
adm1266_gpio_get(), adm1266_gpio_get_multiple(), and
adm1266_gpio_dbg_show() all issue PMBus reads against the device but
none of them take pmbus_lock. The pmbus_core framework holds
pmbus_lock around its own multi-transaction sequences (notably the
"set PAGE, then read paged register" pattern used by hwmon
attributes), so an unlocked GPIO accessor can land between a PAGE
write and the subsequent paged read in another thread and corrupt
either side's view of the device state machine.
Take pmbus_lock at the top of each of the three accessors via the
scope-based guard(). The lock is uncontended in the common case and
adds only a single mutex round-trip per call.
Fixes: d98dfad35c38 ("hwmon: (pmbus/adm1266) Add support for GPIOs")
Cc: stable@vger.kernel.org
Signed-off-by: Abdurrahman Hussain <abdurrahman@nexthop.ai>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260518-adm1266-gpio-fixes-v3-6-e425e4f88139@nexthop.ai
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 4e4af55aaca7f6d7673d5f9889ad0529db86a048 ]
adm1266_state_read() backs the sequencer_state debugfs entry and
issues an i2c_smbus_read_word_data(client, ADM1266_READ_STATE)
against the device without taking pmbus_lock. pmbus_core holds
pmbus_lock around its own multi-transaction sequences (notably the
"set PAGE, then read paged register" pattern used by hwmon
attributes), so an unlocked debugfs reader can land between a PAGE
write and the subsequent paged read in another thread. READ_STATE
itself is not paged, so it cannot corrupt PAGE in flight, but the
same defensive serialisation that applies to the GPIO accessors
applies here: any direct device access from outside pmbus_core
should be ordered with respect to pmbus_core's own.
Take pmbus_lock at the top of adm1266_state_read() via the
scope-based guard().
Fixes: ed1ff457e187 ("hwmon: (pmbus/adm1266) add debugfs for states")
Cc: stable@vger.kernel.org
Signed-off-by: Abdurrahman Hussain <abdurrahman@nexthop.ai>
Link: https://lore.kernel.org/r/20260518-adm1266-gpio-fixes-v3-8-e425e4f88139@nexthop.ai
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 1814f4d3ff358277a5b6957e7f133c2812dc80ec ]
Add support for guard(pmbus_lock)() and scoped_guard(pmbus_lock)()
to be able to simplify the PMBus code.
Also introduce pmbus_lock() as pre-requisite for supporting
guard().
Reviewed-by: Sanman Pradhan <psanman@juniper.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Stable-dep-of: 4e4af55aaca7 ("hwmon: (pmbus/adm1266) serialize sequencer_state debugfs read with pmbus_lock")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 915b36d701950503c4ea0f6e314b10868e59fce3 upstream.
The driver overrides the maximum transfer size for a specific device
which only accepts 16 byte packets for its 32 byte bulk-out endpoint.
Make sure to never increase the maximum transfer size to prevent slab
corruption should a malicious device report a smaller endpoint max
packet size than expected.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit cb3560e8eab1dfa1cac1ed52631adf8ec6ff2cd5 upstream.
Add the missing bulk-out buffer size sanity checks to avoid
out-of-bounds memory accesses or slab corruption should a malicious
device report smaller buffers than expected.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e1a9d791fd66ab2431b9e6f6f835823809869047 upstream.
Make sure that the interrupt-out endpoint max packet size is at least
eight bytes to avoid user-controlled slab corruption or NULL-pointer
dereference should a malicious device report a smaller size.
Fixes: 3416eaa1f8f8 ("USB: cypress_m8: Packet format is separate from characteristic size")
Cc: stable@vger.kernel.org # 2.6.26
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
[ johan: adjust context for 6.18 ]
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit c1a0ecbf32c4b397353204e2ec94c5bb9f3300ed ]
Fix error handling and resource cleanup i.e remove invalid
phy_exit() after failed phy_init(), route failures through
proper cleanup paths and return 0 explicitly on success.
Fixes: 84770f028fab ("usb: dwc3: Add driver for Xilinx platforms")
Cc: stable@vger.kernel.org
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Link: https://patch.msgid.link/20260519115529.2980421-1-radhey.shyam.pandey@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 0e7c710478b3089cdfe8669347f77b163e836c4f ]
Raptor Lake-E has the same processor ID as Raptor Lake-S, so there is
an entry in intel_hybrid_scaling_factor[] for it. It does not contain
E-cores though and hybrid_get_cpu_type() returns 0 for its P-cores, so
they get the default "core" scaling factor. However, the original
Raptor Lake scaling factor for P-cores still needs to be used for
mapping the HWP performance levels of the P-cores in Raptor Lake-E to
frequency, as though they were part of a real hybrid system.
To address this, update hwp_get_cpu_scaling() to return
hybrid_scaling_factor, which is the P-core scaling factor
retrieved from intel_hybrid_scaling_factor[], for all CPUs
that are not enumerated as E-cores.
Fixes: 9b18d536b124 ("cpufreq: intel_pstate: Use CPPC to get scaling factors")
Link: https://lore.kernel.org/all/20260511235328.2018458-1-srinivas.pandruvada@linux.intel.com/
Reported-by: Henry Tseng <henrytseng@qnap.com>
Closes: https://lore.kernel.org/linux-pm/20260508063032.3248602-1-henrytseng@qnap.com/
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: All applicable <stable@vger.kernel.org>
Link: https://patch.msgid.link/4523296.ejJDZkT8p0@rafael.j.wysocki
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 528dde6619677ac6dc26d9dda1e3c9014b4a08c8 ]
Introduce a function for identifying the type of a given CPU in a
hybrid system, called hybrid_get_cpu_type(), and use if for hybrid
scaling factor determination in hwp_get_cpu_scaling().
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/1954386.tdWV9SEqCh@rafael.j.wysocki
Stable-dep-of: 0e7c710478b3 ("cpufreq: intel_pstate: Use correct scaling factor on Raptor Lake-E")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 9b244c242bec48b37e82b89787afd6a4c43457e1 ]
otx2_pool_aq_init() frees pool->stack when mailbox sync or retry
allocation fails, but leaves the pointer unchanged. Later,
otx2_sq_aura_pool_init() unwinds the partial setup through
otx2_aura_pool_free(), which frees pool->stack again. The CN20K-specific
cn20k_pool_aq_init() implementation has the same bug in
its corresponding error path.
Set pool->stack to NULL immediately after the local free so the shared
cleanup path does not free the same stack again while cleaning up
partially initialized pool state.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still present in
v7.1-rc3.
Runtime validation was not performed because reproducing this path
requires OcteonTX2/CN20K hardware.
Fixes: caa2da34fd25 ("octeontx2-pf: Initialize and config queues")
Fixes: d322fbd17203 ("octeontx2-pf: Initialize cn20k specific aura and pool contexts")
Cc: stable@vger.kernel.org
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Signed-off-by: Dawei Feng <dawei.feng@seu.edu.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260515151826.1005397-1-dawei.feng@seu.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 375ba7484132662a4a8c7547d088fb6275c00282 ]
Since the timer uses jiffies as its unit rather than ms, the timeout value
must be converted from ms to jiffies when configuring the timer. Otherwise,
the intended 8s timeout is incorrectly set to approximately 33s.
To improve readability, embed msecs_to_jiffies() directly in the macro
definitions and drop the _MS suffix from macros that now yield jiffies
values: MEMDUMP_TIMEOUT, FW_DOWNLOAD_TIMEOUT, IBS_DISABLE_SSR_TIMEOUT,
CMD_TRANS_TIMEOUT, and IBS_BTSOC_TX_IDLE_TIMEOUT.
IBS_WAKE_RETRANS_TIMEOUT_MS and IBS_HOST_TX_IDLE_TIMEOUT_MS are
intentionally left unchanged. Their values are stored in the struct fields
wake_retrans and tx_idle_delay, which hold ms values at runtime and can be
modified via debugfs. The msecs_to_jiffies() conversion happens at each
call site against the field value, so it cannot be embedded in the macro.
Wake timer depends on commit c347ca17d62a
Cc: stable@vger.kernel.org
Fixes: d841502c79e3 ("Bluetooth: hci_qca: Collect controller memory dump during SSR")
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Shuai Zhang <shuai.zhang@oss.qualcomm.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 12a6a5726c515455935982429ac35dee2307233d ]
This saves a cast in the driver. The motivation is stop using the callback
.shutdown in qca_serdev_driver.driver to make it possible to drop that.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/261a3384e25c4837d4efee87958805f15d7d4e3c.1765526117.git.u.kleine-koenig@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 375ba7484132 ("Bluetooth: hci_qca: Convert timeout from jiffies to ms")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 6d71c62b13c33ea858ab298fe20beaec5736edc7 ]
To prepare serdev driver to migrate away from struct device_driver::shutdown
(and then eventually remove that callback) create a serdev driver shutdown
callback and migration code to keep the existing behaviour. Note this
introduces a warning for each driver at register time that isn't converted
yet to that callback.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/ab518883e3ed0976a19cb5b5b5faf42bd3a655b7.1765526117.git.u.kleine-koenig@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 375ba7484132 ("Bluetooth: hci_qca: Convert timeout from jiffies to ms")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 348ccc754d8939e21ca5956ff45720b81d6e407f ]
After a PCIe Uncorrectable Error has been reported by a device with
Intel Vendor Specific Extended Capabilities and has been recovered
through a Secondary Bus Reset, its driver calls intel_vsec_pci_probe()
to rescan and reinitialize VSECs.
intel_vsec_pci_probe() invokes pcim_enable_device() and thereby adds
another devm action which calls pcim_disable_device() on driver unbind.
So once the driver unbinds, pcim_disable_device() will be called as many
times as an Uncorrectable Error occurred, plus one. This will lead to
an enable_cnt imbalance on driver unbind.
Additionally, since commit dc957ab6aa05 ("platform/x86/intel/vsec: Add
private data for per-device data"), a devm_kzalloc() allocation is
leaked on every Uncorrectable Error.
Avoid by splitting the VSEC rescan out of intel_vsec_pci_probe() into a
separate helper and calling that on PCIe error recovery.
Fixes: 936874b77dd0 ("platform/x86/intel/vsec: Add PCI error recovery support to Intel PMT")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org # v6.0+
Link: https://patch.msgid.link/bd594d09fa866dc51dddc9a447c3b23f9b1402cc.1778736835.git.lukas@wunner.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 9577c74c96f88d807d1ba005adbf5952e7127e55 ]
Treat PCI id->driver_data (intel_vsec_platform_info) as read-only by making
vsec_priv->info a const pointer and updating all function signatures to
accept const intel_vsec_platform_info *.
This improves const-correctness and clarifies that the platform info data
from the driver_data table is not meant to be modified at runtime.
No functional changes intended.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Link: https://patch.msgid.link/20260313015202.3660072-3-david.e.box@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Stable-dep-of: 348ccc754d89 ("platform/x86/intel/vsec: Fix enable_cnt imbalance on PCIe error recovery")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 904b333fc51cc045941df9656302449a0fc9978e ]
The base_addr field in intel_vsec_platform_info was originally added to
support devices that emulate PCI VSEC capabilities in MMIO. Previously,
the code would check at registration time whether base_addr was set,
falling back to the PCI BAR if not.
Refactor this by making base_addr an explicit function parameter. This
clarifies ownership of the value and removes conditional logic from
intel_vsec_add_dev(). It also enables making intel_vsec_platform_info
const in a later patch, since the function no longer needs to write to
info->base_addr.
No functional change intended.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Link: https://patch.msgid.link/20260313015202.3660072-2-david.e.box@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Stable-dep-of: 348ccc754d89 ("platform/x86/intel/vsec: Fix enable_cnt imbalance on PCIe error recovery")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2e211723953f7740e54b53f3d3a0d5e351a5e223 upstream.
dw8250_handle_irq() calls serial8250_handle_irq_locked() with the port
lock held via guard(uart_port_lock_irqsave). The guard destructor is
plain uart_port_unlock_irqrestore(), so a SysRq character captured into
port->sysrq_ch by uart_prepare_sysrq_char() is dropped without ever
being dispatched to handle_sysrq().
This is the same regression pattern as in serial8250_handle_irq(),
introduced when 883c5a2bc934 ("serial: 8250_dw: Rework
dw8250_handle_irq() locking and IIR handling") moved the function to
the guard()-based locking scheme without using the sysrq-aware unlock
helper.
Switch to guard(uart_port_lock_check_sysrq_irqsave) so that captured
sysrq_ch is dispatched on scope exit, matching the fix in
serial8250_handle_irq().
Fixes: 883c5a2bc934 ("serial: 8250_dw: Rework dw8250_handle_irq() locking and IIR handling")
Cc: stable@vger.kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Jacques Nilo <jnilo@free.fr>
Link: https://patch.msgid.link/ed56fcaf4af24e4ed011a7bce206e0182acb761c.1778675349.git.jnilo@free.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 71f42b2149a1307a97165b409493665579462ea0 upstream.
serial8250_handle_irq() captures a SysRq character into port->sysrq_ch
inside serial8250_handle_irq_locked() via uart_prepare_sysrq_char()
(reached from serial8250_read_char()). Dispatch of that captured
character to handle_sysrq() is expected to happen at port-unlock time,
through uart_unlock_and_check_sysrq[_irqrestore]().
After commit 8324a54f604d ("serial: 8250: Add
serial8250_handle_irq_locked()") the function was reduced to a wrapper
that takes the port lock via guard(uart_port_lock_irqsave) whose
destructor is plain uart_port_unlock_irqrestore(). The sysrq-aware
unlock helper is no longer called, so port->sysrq_ch is captured but
never dispatched: BREAK + SysRq key is consumed silently.
This was the very condition Johan Hovold's 853a9ae29e978 ("serial:
8250: fix handle_irq locking", 2021) introduced
uart_unlock_and_check_sysrq_irqrestore() to address.
Switch to the new guard(uart_port_lock_check_sysrq_irqsave), whose
destructor is the sysrq-aware unlock helper, restoring the pre-split
behaviour. Update the Context: comment on serial8250_handle_irq_locked()
so future HW-specific 8250 wrappers know to use the same guard or the
explicit sysrq-aware unlock.
Verified on RTL8196E with CONFIG_MAGIC_SYSRQ_SERIAL=y: BREAK + 'h' on
the console UART produces the SysRq help dump in dmesg and the brk
counter in /proc/tty/driver/serial increments correctly.
Fixes: 8324a54f604d ("serial: 8250: Add serial8250_handle_irq_locked()")
Cc: stable@vger.kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Jacques Nilo <jnilo@free.fr>
Link: https://patch.msgid.link/52692ae6c3501f7940347cef364ad7fcacaab7e5.1778675349.git.jnilo@free.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7cac59d08a73cb866ec51a483a6f3fe0f531947c upstream.
Prevent a crash from happening as the first serial port is initialised:
Console: switching to mono frame buffer device 160x64
fb0: PMAG-AA frame buffer device at tc0
DECstation Z85C30 serial driver version 0.10
CPU 0 Unable to handle kernel paging request at virtual address 0000002c, epc == 803ab00c, ra == 803aafe0
Oops[#1]:
CPU: 0 PID: 1 Comm: swapper Not tainted 6.4.0-rc3-00031-g84a9582fd203-dirty #57
$ 0 : 00000000 10012c00 803aaeb0 00000000
$ 4 : 80e12f60 80e12f50 80e12f58 81000030
$ 8 : 00000000 805ff37c 00000000 33433538
$12 : 65732030 00000006 80c2915d 6c616972
$16 : 80e12f00 807b7630 00000000 00000000
$20 : 00000004 00000348 000001a0 807623b8
$24 : 00000018 00000000
$28 : 80c24000 80c25d60 8078b148 803aafe0
Hi : 00000000
Lo : 00000000
epc : 803ab00c serial_base_ctrl_add+0x78/0xf4
ra : 803aafe0 serial_base_ctrl_add+0x4c/0xf4
Status: 10012c03 KERNEL EXL IE
Cause : 00000008 (ExcCode 02)
BadVA : 0000002c
PrId : 00000440 (R4400SC)
Modules linked in:
Process swapper (pid: 1, threadinfo=(ptrval), task=(ptrval), tls=00000000)
Stack : 80760000 00000cc0 00400044 00400040 803aa02c 80d61ab8 00000000 807b7630
80760000 807623b8 807b7628 803aa644 80386998 00000000 80e17780 80220f68
80e17780 80d61ab8 80c17d80 80e17780 80e17780 8063c798 80e17780 80383fa0
00000010 80e17780 00000000 80386998 807a0000 00000000 00400040 8038f848
807623b8 80d61ab8 00000004 80e17780 00000000 803a68e4 80c25e2c 803bb884
...
Call Trace:
[<803ab00c>] serial_base_ctrl_add+0x78/0xf4
[<803aa644>] serial_core_register_port+0x174/0x69c
[<8077e9ac>] zs_init+0xc8/0xfc
[<800404d4>] do_one_initcall+0x40/0x2ac
[<8076cecc>] kernel_init_freeable+0x1e4/0x270
[<80605bec>] kernel_init+0x20/0x108
[<800431e8>] ret_from_kernel_thread+0x14/0x1c
Code: 2442aeb0 ae120024 ae0200d0 <8c67002c> 50e00001 8c670000 3c06806e 3c05806e afb30010
---[ end trace 0000000000000000 ]---
(report at the offending commit) -- where a pointer is dereferenced that
has been derived from a null pointer to the port's parent device.
Since no device is available with legacy probing and it's not anymore a
preferable way to discover devices anyway, switch the driver to using a
platform device and use it as the port's parent device. Update resource
handling accordingly and only request the actual span of addresses used
within the slot, which will have had its resource already requested by
generic platform device code.
Use platform_driver_probe() not just because SCC devices are fixed with
solder on board and not straightforward to remove, but foremost because
the associated TTY's major device number is the same as used by the dz
driver and the first driver to claim it will prevent the other one from
using it. Either one DZ device or some SCC devices will be present in a
given system but never both at a time, and therefore we want the major
device number to be claimed by the first driver to actually successfully
bind to its device and platform_driver_probe() is a way to fulfil that.
An unfortunate consequence of the switch to a platform device is we now
hand the console over from the bootconsole much later in the bootstrap.
The firmware console handler appears good enough though to work so late
and in particular with interrupts enabled.
Since there is one way only remaining to reach zs_reset() now, remove
the port initialisation marker as no longer needed and go through the
channel reset unconditionally.
Fixes: 84a9582fd203 ("serial: core: Start managing serial controllers to enable runtime PM")
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Cc: stable@vger.kernel.org # needs to use .remove_new for <= 6.10
Link: https://patch.msgid.link/alpine.DEB.2.21.2605062328480.46195@angie.orcam.me.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8572955630f30948837088aa98bcbe0532d1ceac upstream.
Switch the driver to using the channel reset rather than hardware reset,
simplifying handling by removing an interference between channels that
causes the other channel to become uninitialised afterwards.
There is little difference between the two kinds of reset in terms of
register settings that result, and we initialise the whole register set
right away anyway. However this prevents a hang from happening should
the console output handler in the firmware try to access the other port
whose transmitter has been disabled and line parameters messed up.
For example this will happen if the keyboard port (port A) is chosen for
the system console, unusually but not insanely for a headless system, as
the port is wired to a standard DA-15 connector and an adapter can be
easily made. Or with the next change in place this would happen for the
regular console port (port B), since the keyboard port (port A) will be
initialised first.
Just remove the unnecessary complication then, a channel reset is good
enough. We still need the initialisation marker, now per channel rather
than per SCC, as for the console port zs_reset() will be called twice:
once early on via zs_serial_console_init() for the console setup only,
and then again via zs_config_port() as the port is associated with a TTY
device.
Fixes: 8b4a40809e53 ("zs: move to the serial subsystem")
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Cc: stable@vger.kernel.org # v2.6.23+
Link: https://patch.msgid.link/alpine.DEB.2.21.2605062323430.46195@angie.orcam.me.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6c05cf72e13314ce9b770b5951695dc5a2152920 upstream.
Calling zs_reset() in the course of setting up the serial device causes
line parameters to be reset and the transmitter disabled. We've been
lucky in that no message is usually produced to the kernel log between
this call and the later call to uart_set_options() in the course of
console setup done by zs_serial_console_init(), or the system would hang
as the console output handler in the firmware tried to access a port the
transmitter of which has been disabled and line parameters messed up.
This will change with the next change to the driver, so fix zs_reset()
such that line parameters are set for 9600n8 console operation as with
the system firmware and the transmitter re-enabled after reset. This
also means zs_pm() serves no purpose anymore, so drop it.
Fixes: 8b4a40809e53 ("zs: move to the serial subsystem")
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Cc: stable@vger.kernel.org # v2.6.23+
Link: https://patch.msgid.link/alpine.DEB.2.21.2605062308040.46195@angie.orcam.me.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5d7a49d60b8fda66da60e240fd7315232fa1754f upstream.
Prevent a crash from happening as the first serial port is initialised:
Console: switching to colour frame buffer device 160x64
tgafb: SFB+ detected, rev=0x02
fb0: Digital ZLX-E1 frame buffer device at 0x1e000000
DECstation DZ serial driver version 1.04
CPU 0 Unable to handle kernel paging request at virtual address 000000bc, epc == 8048b3a4, ra == 80470a78
Oops[#1]:
CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.19.0-dirty #35 NONE
$ 0 : 00000000 1000ac00 00000004 804707ac
$ 4 : 00000000 80e20850 80e20858 81000030
$ 8 : 00000000 8072c81c 00000008 fefefeff
$12 : 6c616972 00000006 80c5917f 69726420
$16 : 80e20800 00000000 808f8968 80e20800
$20 : 00000000 807f5a90 808b0094 808d3bc8
$24 : 00000018 80479030
$28 : 80c2e000 80c2fd70 00000069 80470a78
Hi : 00000004
Lo : 00000000
epc : 8048b3a4 __dev_fwnode+0x0/0xc
ra : 80470a78 serial_base_ctrl_add+0xa0/0x168
Status: 1000ac04 IEp
Cause : 30000008 (ExcCode 02)
BadVA : 000000bc
PrId : 00000220 (R3000)
Modules linked in:
Process swapper/0 (pid: 1, threadinfo=(ptrval), task=(ptrval), tls=00000000)
Stack : 00400044 00400040 8046f4cc 00000000 808a6148 808a0000 808f8968 8086983c
808e0000 8046fc84 1000ac01 00000028 80e20700 802ba3f8 80e20700 80d34a94
80c1b900 80e20700 80e20700 80e20700 80e20700 80444650 00000000 00000000
00000000 807f5a90 808b0094 80447080 00400040 808e0000 80d34a94 808a6148
80d34a94 00000004 80e20700 00000000 8076974c 80469810 80c2fe3c 1000ac01
...
Call Trace:
[<8048b3a4>] __dev_fwnode+0x0/0xc
[<80470a78>] serial_base_ctrl_add+0xa0/0x168
[<8046fc84>] serial_core_register_port+0x1c8/0x974
[<808c6af0>] dz_init+0x74/0xc8
[<800470e0>] do_one_initcall+0x44/0x2d4
[<808b111c>] kernel_init_freeable+0x258/0x308
[<8072e434>] kernel_init+0x20/0x114
[<80049cd0>] ret_from_kernel_thread+0x14/0x1c
Code: 27bd0018 03e00008 2402ffea <8c8200bc> 03e00008 00000000 27bdffc0 afbe0038 afb30024
---[ end trace 0000000000000000 ]---
-- where a pointer is dereferenced that has been derived from a null
pointer to the port's parent device.
Since no device is available with legacy probing and it's not anymore a
preferable way to discover devices anyway, switch the driver to using a
platform device and use it as the port's parent device. Update resource
handling accordingly and only request the actual span of addresses used
within the slot, which will have had its resource already requested by
generic platform device code.
Use platform_driver_probe() not just because the DZ device is fixed with
solder on board and not straightforward to remove, but foremost because
the associated TTY's major device number is the same as used by the zs
driver and the first driver to claim it will prevent the other one from
using it. Either one DZ device or some SCC devices will be present in a
given system but never both at a time, and therefore we want the major
device number to be claimed by the first driver to actually successfully
bind to its device and platform_driver_probe() is a way to fulfil that.
An unfortunate consequence of the switch to a platform device is we now
hand the console over from the bootconsole much later in the bootstrap.
The firmware console handler appears good enough though to work so late
and in particular with interrupts enabled.
Conversely only starting the console port so late lets the reset code
fully utilise our delay handlers, so switch from udelay() to fsleep()
for transmitter draining so as to avoid busy-waiting for an excessive
amount of time.
Fixes: 84a9582fd203 ("serial: core: Start managing serial controllers to enable runtime PM")
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Cc: stable@vger.kernel.org # needs to use .remove_new for <= 6.10
Link: https://patch.msgid.link/alpine.DEB.2.21.2605062326540.46195@angie.orcam.me.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7f127b2208e5e2b817243cad41fe4211a6d5a7a3 upstream.
Calling dz_reset() in the course of setting up the serial device causes
line parameters to be reset and the transmitter disabled. We've been
lucky in that no message is usually produced to the kernel log between
this call and the later call to uart_set_options() in the course of
console setup done by dz_serial_console_init(), or the system would hang
as the console output handler in the firmware tried to access a port the
transmitter of which has been disabled and line parameters messed up.
This will change with the next change to the driver, so fix dz_reset()
such that line parameters are set for 9600n8 console operation as with
the system firmware and the transmitter re-enabled after reset. This
also means dz_pm() serves no purpose anymore, so drop it.
Fixes: e6ee512f5a77 ("dz.c: Resource management")
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Cc: stable@vger.kernel.org # v2.6.25+
Link: https://patch.msgid.link/alpine.DEB.2.21.2605062302010.46195@angie.orcam.me.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ca904f4b42355287bc5ce8b7550ebe909cda4c2c upstream.
In the DZ interface as implemented by the DC7085 gate array the serial
transmitters are double buffered, meaning that at the time a transmitter
is ready to accept the next character there is one in the transmit shift
register still being sent to the line. Issuing a master clear at this
time causes this character to be lost, so wait an extra amount of time
sufficient for the transmit shift register to drain at 9600bps, which is
the baud rate setting used by the firmware console.
Mind the specified 1.4us TRDY recovery time in the course and continue
using iob() as the completion barrier, since the platforms involved use
a write buffer that can delay and combine writes, and reorder them with
respect to reads regardless of the MMIO locations accessed and we still
lack a platform-independent handler for that.
When called from dz_serial_console_init() this is too early for fsleep()
to work and even before lpj has been calculated and therefore the delay
is actually not sufficient for the transmitter to drain and is merely a
placeholder now. This will be addressed in a follow-up change.
Fixes: e6ee512f5a77 ("dz.c: Resource management")
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Cc: stable@vger.kernel.org # v2.6.25+
Link: https://patch.msgid.link/alpine.DEB.2.21.2605062259080.46195@angie.orcam.me.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a1ba4594232c87c3b8defd6f89a2e40f8b08395d upstream.
kvcalloc(args->num_entries, sizeof(*vm_entries), GFP_KERNEL) at
amdgpu_gem.c:1050 uses the user-supplied num_entries directly without
any upper bounds check. Since num_entries is a __u32 and
sizeof(drm_amdgpu_gem_vm_entry) is 32 bytes, a large num_entries
produces an allocation exceeding INT_MAX, triggering
WARNING in __kvmalloc_node_noprof(), causing a kernel WARNING,
TAINT_WARN, and panic on CONFIG_PANIC_ON_WARN=y systems.
Add a size bounds check before we invoke the kvzalloc() to
reject oversized num_entries early with -EINVAL.
Fixes: 4d82724f7f2b ("drm/amdgpu: Add mapping info option for GEM_OP ioctl")
Signed-off-by: Ziyi Guo <n7l8m4@u.northwestern.edu>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 1fe7bf5457f6efd7be60b17e23163ba54341d73d)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1c824497d8acd3187d585d6187cedc1897dcc871 upstream.
Otherwise we don't invalidate page tables on next CS.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Tested-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit b6444d1bcbc34f6f2a31a3aab3059be082f3683e)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2e7f55eb408c3f72ee1957a0d0ad11d8648a6379 upstream.
The AMDGPU_GEM_OP_GET_MAPPING_INFO branch of amdgpu_gem_op_ioctl()
holds three cleanup-tracked resources before calling kvcalloc():
the drm_gem_object reference from drm_gem_object_lookup(), the
drm_exec lock on the looked-up GEM via drm_exec_lock_obj(), and
the drm_exec lock on the per-process VM root page directory via
amdgpu_vm_lock_pd(). All three are released by the out_exec
label that every other error path in this function jumps to.
The kvcalloc() failure path returns -ENOMEM directly, skipping
out_exec and leaking all three.
The leaked per-process VM root PD dma_resv lock is the
load-bearing leak: any subsequent operation on the same VM
(further GEM ops, command-submission, eviction, TTM shrinker
callbacks) blocks on the held lock. DRM_IOCTL_AMDGPU_GEM_OP is
DRM_AUTH | DRM_RENDER_ALLOW, so this is an unprivileged-local
denial of service against the caller's GPU context, reachable
by any process with /dev/dri/renderD* access.
Route the failure through out_exec so drm_exec_fini() and
drm_gem_object_put() run.
Reproduced on stock 7.0.0-10, Ryzen 7 5700U / Radeon Vega
(Lucienne): the failing ioctl returns -ENOMEM and a second
GET_MAPPING_INFO on the same fd then blocks in
drm_exec_lock_obj() on the leaked dma_resv. SIGKILL on the
caller does not reap the task; the fd-release path during
process exit goes through amdgpu_gem_object_close() ->
drm_exec_prepare_obj() on the same lock, leaving the task in D
state until the box is rebooted. The patched kernel was not
rebuilt and re-tested on this hardware; the fix is mechanical.
Tested on a single Lucienne / Vega box only.
Ziyi Guo posted an independent INT_MAX-bound check for
args->num_entries in the same branch [1]; the two patches are
complementary and can land in either order.
Fixes: 4d82724f7f2b ("drm/amdgpu: Add mapping info option for GEM_OP ioctl")
Link: https://lore.kernel.org/all/20260208000255.4073363-1-n7l8m4@u.northwestern.edu/ # [1]
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit b69d3256d79de15f54c322986ff4da68f1d65b0a)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6842b6a4b72da9b2906ffc5ca9d846ace2c54c14 upstream.
CRIU restore ioctls are meant to be called by CRIU with no
existing drm file. There's an error path
for if the drm file unexpectedly exists. It was positioned so
it was missing a fput(drm_file).
Do that check earlier, as soon as we have the pdd.
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 2bab781dac78916c5cc8de76345a4102449267d7)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 93f5534b35a05ef8a0109c1eefa800062fee810a upstream.
get_queue_ids() computes array_size = num_queues * sizeof(uint32_t),
which could overflow on 32-bit size_t build. using array_size()
instead, it saturates to SIZE_MAX on overflow.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 2d57a0475f085c08b49312dfd8edcb461845f285)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e984d61d92e702096058f0f828f4b2b8563b88ce upstream.
The process_info could be NULL if user doesn't call kfd_ioctl_acquire_vm
before calling kfd_ioctl_svm.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 83a26c812e0529eb040d31a76f73e33e637243d4)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9a9254c4a2a3ca2b3da16d173f3b0dd01f397ff6 upstream.
lpuart_start_rx_dma() allocates sport->rx_ring.buf with kzalloc() and
then maps a scatterlist via dma_map_sg(). On three subsequent error
paths the function returns directly without releasing those resources:
- when dma_map_sg() returns 0 (-EINVAL):
ring->buf is leaked.
- when dmaengine_slave_config() fails:
ring->buf and the DMA mapping are leaked.
- when dmaengine_prep_dma_cyclic() returns NULL:
ring->buf and the DMA mapping are leaked.
The sole cleanup path, lpuart_dma_rx_free(), is only reached when
lpuart_dma_rx_use is set, and the caller lpuart_rx_dma_startup() clears
that flag on failure of lpuart_start_rx_dma(). So these resources are
permanently leaked on every failure in this function. Repeated port
open/close or termios changes under error conditions will slowly consume
memory and leave stale streaming DMA mappings behind.
Fix it by introducing two error labels that unmap the scatterlist and
free the ring buffer as appropriate. While here, replace the misleading
-EFAULT (bad userspace pointer) returned when dmaengine_prep_dma_cyclic()
fails with the more accurate -ENOMEM, matching how other dmaengine users
in the tree treat this failure.
No functional change on the success path.
Fixes: 5887ad43ee02 ("tty: serial: fsl_lpuart: Use cyclic DMA for Rx")
Cc: stable <stable@kernel.org>
Signed-off-by: Shitalkumar Gandhi <shitalkumar.gandhi@cambiumnetworks.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260420135903.2062024-1-shitalkumar.gandhi@cambiumnetworks.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d15cd40cb1858f75846eaafa9a6bca841b790a92 upstream.
Fix a thinko in the status interrupt handler that has caused counters
for the RI and DSR modem line transitions to be used for the other line
each.
Fixes: 8b4a40809e53 ("zs: move to the serial subsystem")
Cc: stable <stable@kernel.org>
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Link: https://patch.msgid.link/alpine.DEB.2.21.2604101747110.29980@angie.orcam.me.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 92b1ea22454b08a39baef3a7290fb3ec50366616 upstream.
The sci_request_port() function uses request_mem_region() to reserve
I/O memory, but in the error path when sci_remap_port() fails, it
incorrectly calls release_resource() instead of release_mem_region().
This mismatch can cause resource accounting issues. Fix it by using
the correct release function, consistent with sci_release_port().
Fixes: e2651647080930a1 ("serial: sh-sci: Handle port memory region reservations.")
Cc: stable <stable@kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/r/202604032356.SzEjYkBC-lkp@intel.com/
Signed-off-by: Hongling Zeng <zenghongling@kylinos.cn>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260421065737.724187-1-zenghongling@kylinos.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 452d6fa37ae9b021f4f6d397dbae077f7296f6f4 upstream.
When uart_flush_buffer() runs before the DMA completion IRQ is delivered,
the following race can occur (all steps serialized by uart_port_lock):
1. DMA starts: tx_remaining = N, kfifo contains N bytes
2. DMA completes in hardware; IRQ is pending but not yet delivered
3. uart_flush_buffer() acquires the port lock and calls kfifo_reset(),
making kfifo_len() = 0 while tx_remaining remains N
4. uart_flush_buffer() releases the port lock
5. DMA IRQ fires; handle_tx_dma() acquires the port lock and calls
uart_xmit_advance(uport, tx_remaining) on an empty kfifo
uart_xmit_advance() increments kfifo->out by tx_remaining. Since
kfifo_reset() already set both in and out to 0, out wraps past in,
causing kfifo_len() to return UART_XMIT_SIZE - tx_remaining. The next
start_tx_dma() call then submits a DMA transfer of stale buffer data.
Fix this by snapshotting kfifo_len() at the start of handle_tx_dma()
and skipping uart_xmit_advance() when fifo_len < tx_remaining, which
indicates the kfifo was reset by a preceding flush.
Fixes: 2aaa43c70778 ("tty: serial: qcom-geni-serial: add support for serial engine DMA")
Cc: stable <stable@kernel.org>
Signed-off-by: Viken Dadhaniya <viken.dadhaniya@oss.qualcomm.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260506-serial-dma-stale-tx-buf-v1-1-e3ccb360d719@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ca2584d841b69391ffc4144840563d2e1a0018df upstream.
UART_RX_PAR_EN is incorrectly defined as bit 3, which triggers false
framing errors (S_GP_IRQ_1_EN) and causes received data to be dropped
when parity is enabled and the parity bit is 0.
Define UART_RX_PAR_EN as bit 4 of the SE_UART_RX_TRANS_CFG register, as
specified in the reference manual.
Fixes: c4f528795d1a ("tty: serial: msm_geni_serial: Add serial driver support for GENI based QUP")
Cc: stable <stable@kernel.org>
Signed-off-by: Prasanna S <prasanna.s@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://patch.msgid.link/20260428-serial-bit-correct-v1-1-9131ad5b97d8@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ea66be25f0e934f49d24cd0c5845d13cdba3520b upstream.
altera_jtaguart_probe() maps the register window before registering the
UART port, but it ignores failures from uart_add_one_port(). If port
registration fails, probe still returns success and the mapping remains
live until a later remove path that is not part of probe failure cleanup.
Return the uart_add_one_port() error and unmap the register window on
that failure path.
This issue was identified during our ongoing static-analysis research while
reviewing kernel code.
Fixes: 5bcd601049c6 ("serial: Add driver for the Altera JTAG UART")
Cc: stable <stable@kernel.org>
Co-developed-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Myeonghun Pak <mhun512@gmail.com>
Link: https://patch.msgid.link/20260512065837.79528-1-mhun512@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit dd4f3ee535b3b0ac027f75dbf9dc5fc88733c765 upstream.
When no displays are connected, there is no vblank
happening so the power management code shouldn't
worry about it.
This fixes a regression that caused the memory clock
to be stuck at maximum when there were no displays
connected to a SI GPU.
Fixes: 9003a0746864 ("drm/amd/pm: Treat zero vblank time as too short in si_dpm (v3)")
Fixes: 9d73b107a61b ("drm/amd/pm: Use pm_display_cfg in legacy DPM (v2)")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Jeremy Klarenbeek <jeremy.klarenbeek99@gmail.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 6d87e0199f7b83735b56e422d59f170a201897a8)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5c4063c87a619e4df954c179d24628636f5db15f upstream.
TLDR: The bo->ttm object might be changed by calling ttm_bo_validate(),
move casting it to an i915_tt object later to actually get the right
pointer.
A user reported hitting the following bug under heavy use on DG2:
[26620.095550] Oops: general protection fault, probably for non-canonical address 0xa56b6b6b6b6b6b8b: 0000 1 SMP NOPTI
[26620.095556] CPU: 2 UID: 0 PID: 631 Comm: Xorg Not tainted 6.18.8 #1 PREEMPT(lazy)
[26620.095558] Hardware name: ASRock B850M Steel Legend WiFi/B850M Steel Legend WiFi, BIOS 3.50 09/18/2025
[26620.095559] RIP: 0010:i915_ttm_purge+0x84/0x100 [i915]
[26620.095604] Code: 00 00 00 48 8d 54 24 10 48 89 e6 48 89 fb e8 83 aa ae ff 85 c0 75 6f 48 83 bb a8 01 00 00 00 74 2c 48 8b 45 78 48 85 c0 74 23 <48> 8b 78 20 48 c7 c2 ff ff ff ff 31 f6 e8 7a 73 e3 e0 48 8b 7d 78
[26620.095605] RSP: 0018:ffffc90005fd7430 EFLAGS: 00010282
[26620.095607] RAX: a56b6b6b6b6b6b6b RBX: ffff8881f46c3dc0 RCX: 0000000000000000
[26620.095608] RDX: 0000000000000000 RSI: 0000000000000246 RDI: 00000000ffffffff
[26620.095609] RBP: ffff888289610f00 R08: 0000000000000001 R09: ffff88823b022000
[26620.095609] R10: ffff888103029b28 R11: ffff8881fc7f3800 R12: ffff88810b6150d0
[26620.095609] R13: ffff888289610f00 R14: 0000000000000000 R15: ffff8881f46c3dc0
[26620.095610] FS: 00007f1004d86900(0000) GS:ffff88901c858000(0000) knlGS:0000000000000000
[26620.095611] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[26620.095611] CR2: 00007f0fdf489000 CR3: 000000035b0c1000 CR4: 0000000000750ef0
[26620.095612] PKRU: 55555554
[26620.095612] Call Trace:
[26620.095615] <TASK>
[26620.095615] i915_ttm_move+0x2b9/0x420 [i915]
[26620.095642] ? ttm_tt_init+0x65/0x80 [ttm]
[26620.095644] ? i915_ttm_tt_create+0xc6/0x150 [i915]
[26620.095667] ttm_bo_handle_move_mem+0xb6/0x160 [ttm]
[26620.095669] ttm_bo_evict+0x100/0x150 [ttm]
[26620.095671] ? preempt_count_add+0x64/0xa0
[26620.095673] ? _raw_spin_lock+0xe/0x30
[26620.095675] ? _raw_spin_unlock+0xd/0x30
[26620.095675] ? i915_gem_object_evictable+0xb7/0xd0 [i915]
[26620.095704] ttm_bo_evict_cb+0x6e/0xd0 [ttm]
[26620.095705] ttm_lru_walk_for_evict+0xa6/0x200 [ttm]
[26620.095708] ttm_bo_alloc_resource+0x185/0x4f0 [ttm]
[26620.095709] ? init_object+0x62/0xd0
[26620.095712] ttm_bo_validate+0x7a/0x180 [ttm]
[26620.095713] ? _raw_spin_unlock_irqrestore+0x16/0x30
[26620.095714] __i915_ttm_get_pages+0xb0/0x170 [i915]
[26620.095737] i915_ttm_get_pages+0x9f/0x150 [i915]
[26620.095759] ? i915_gem_do_execbuffer+0xedc/0x2b40 [i915]
[26620.095786] ? alloc_debug_processing+0xd0/0x100
[26620.095787] ? _raw_spin_unlock_irqrestore+0x16/0x30
[26620.095788] ? i915_vma_instance+0xa0/0x4e0 [i915]
[26620.095822] __i915_gem_object_get_pages+0x2f/0x40 [i915]
[26620.095848] i915_vma_pin_ww+0x706/0x980 [i915]
[26620.095875] ? i915_gem_do_execbuffer+0xedc/0x2b40 [i915]
[26620.095904] eb_validate_vmas+0x170/0xa00 [i915]
[26620.095930] i915_gem_do_execbuffer+0x1201/0x2b40 [i915]
[26620.095953] ? alloc_debug_processing+0xd0/0x100
[26620.095954] ? _raw_spin_unlock_irqrestore+0x16/0x30
[26620.095955] ? i915_gem_execbuffer2_ioctl+0xc9/0x240 [i915]
[26620.095977] ? __wake_up_sync_key+0x32/0x50
[26620.095979] ? i915_gem_execbuffer2_ioctl+0xc9/0x240 [i915]
[26620.096001] ? __slab_alloc.isra.0+0x67/0xc0
[26620.096003] i915_gem_execbuffer2_ioctl+0x11a/0x240 [i915]
Results from decode_stacktrace.sh pointed to dereference of a file pointer
field of a i915 TTM page vector container associated with an object being
purged on eviction. That path is taken when the object is marked as no
longer needed.
Code analysis revealed a possibility of the i915 TTM page vector container
being replaced with a new instance inside a function that purges content
of the object, should it be still busy. That function is called,
indirectly via a more general function that changes the object's placement
and caching policy, before the problematic dereference, but still after
a pointer to the container is captured, rendering the pointer no longer
valid.
Fix the issue by capturing the pointer to the container only after its
potential replacement.
v2: Move the container_of() inside the if block (Sebastian),
- a simplified version of the commit description that explains briefly
why the change is necessary (Christian).
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/work_items/14882
Fixes: 7ae034590ceae ("drm/i915/ttm: add tt shmem backend")
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Cc: stable@vger.kernel.org # v5.17+
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Cc: Christian König <christian.koenig@amd.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://lore.kernel.org/r/20260508122612.469227-2-janusz.krzysztofik@linux.intel.com
(cherry picked from commit 4462966a93eb185849b7f174f0d0de53476d00a4)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8bb9093df555f9e89fdbe1405118b11384c03e04 upstream.
Currently we are blocking DC states only when Panel Replay is enabled on
vblank enable. It may happen that Panel Replay is getting enabled when
vblank is already enabled. Fix this by blocking DC states always if Panel
Replay is supported.
While at it take care of possible dual eDP case by looping all encoders
supporting PSR.
Fixes: 0c427ac78a1d ("drm/i915/psr: Add interface to notify PSR of vblank enable/disable")
Cc: <stable@vger.kernel.org> # v6.16+
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Michał Grzelak <michal.grzelak@intel.com>
Link: https://patch.msgid.link/20260520104944.239797-1-jouni.hogander@intel.com
(cherry picked from commit eb5911f990554f7ce947dd53df00c114362e4465)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7164d78559b0ff29931a366a840a9e5dd53d4b7c upstream.
drm_gem_change_handle_ioctl leaves the old handle live in the IDR
during the window between spin_unlock(table_lock) and the final
spin_lock(table_lock). A concurrent drm_gem_handle_delete on the old
handle succeeds in this window, decrements handle_count to 0, and frees
the GEM object while the new handle's IDR entry still references it.
NULL the old handle's IDR entry before dropping table_lock so that any
concurrent GEM_CLOSE on the old handle sees NULL and returns -EINVAL.
Restore the old entry on the prime-bookkeeping error path.
Fixes: 5e28b7b94408 ("drm: Set old handle to NULL before prime swap in change_handle")
Signed-off-by: Zhenghang Xiao <kipreyyy@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patch.msgid.link/20260526085313.26791-1-kipreyyy@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7f87763f47a3c22fb50265a00619ef10f2394b18 upstream.
hyperv_receive_sub() reads msg->vid_hdr.type and dispatches into one
of four message-type branches without knowing how many bytes the host
wrote into hv->recv_buf. The completion path then runs
memcpy(hv->init_buf, msg, VMBUS_MAX_PACKET_SIZE), so the consumer that
wakes on wait_for_completion_timeout() can read up to 16 KiB of
residue from a prior message as if it were the response payload.
Pass bytes_recvd into hyperv_receive_sub() and reject any packet that
does not cover the pipe + synthvid header. A single switch on
msg->vid_hdr.type then computes the type-specific payload size: the
three completion-driving types (SYNTHVID_VERSION_RESPONSE,
SYNTHVID_RESOLUTION_RESPONSE, SYNTHVID_VRAM_LOCATION_ACK) fall through
to a shared exit that requires that size before memcpy/complete, while
SYNTHVID_FEATURE_CHANGE validates its own payload and returns before
reading is_dirt_needed. Unknown types are dropped.
SYNTHVID_RESOLUTION_RESPONSE is variable length: the host fills
resolution_count entries, not the full SYNTHVID_MAX_RESOLUTION_COUNT
array. Validate the fixed prefix first so resolution_count can be
read, bound it against the array, then require only the count-sized
array, so the shorter responses the host actually sends are accepted.
Only run the sub-handler when vmbus_recvpacket() returned success. The
memcpy length is bytes_recvd, which is bounded by VMBUS_MAX_PACKET_SIZE
only on a successful receive; on -ENOBUFS vmbus_recvpacket() instead
reports the required length, which can exceed hv->recv_buf, so copying
bytes_recvd would read and write past the 16 KiB buffers. Gating on the
success return keeps the copy bounded. The nonzero-return path is itself
a malformed-message case and is now logged rather than silently skipped;
channel recovery is not attempted.
Rejected packets are reported via drm_err_ratelimited() rather than
silently dropped, matching the CoCo-hardened pattern in
hv_kvp_onchannelcallback().
Fixes: 76c56a5affeb ("drm/hyperv: Add DRM driver for hyperv synthetic video device")
Cc: stable@vger.kernel.org # 5.14+
Signed-off-by: Berkant Koc <me@berkoc.com>
Assisted-by: Claude:claude-opus-4-7 berkoc-pipeline
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Hamza Mahfooz <hamzamahfooz@linux.microsoft.com>
Link: https://patch.msgid.link/8200dbc199c7a9b75ac7e8af6c748d2189b5ebd5.1779542874.git.me@berkoc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 13d33b9ef67066c77c84273fac5a1d3fde3533d1 upstream.
A SYNTHVID_RESOLUTION_RESPONSE with resolution_count > 64 walks past
the supported_resolution[SYNTHVID_MAX_RESOLUTION_COUNT] array in the
parse loop. Bound resolution_count against the array size, folded
into the existing zero-check.
When the WIN10 resolution probe fails, the caller in
hyperv_connect_vsp() left hv->screen_*_max / preferred_* unpopulated,
which sets mode_config.max_width / max_height to 0 and makes
drm_internal_framebuffer_create() reject every userspace framebuffer
with -EINVAL. The pre-WIN10 branch had the same gap for
preferred_width / preferred_height. Use a single post-probe fallback
guarded by screen_width_max == 0 so both paths converge on the WIN8
defaults.
Signed-off-by: Berkant Koc <me@berkoc.com>
Assisted-by: Claude:claude-opus-4-7 berkoc-pipeline
Fixes: 76c56a5affeb ("drm/hyperv: Add DRM driver for hyperv synthetic video device")
Cc: stable@vger.kernel.org # 5.14+
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Hamza Mahfooz <hamzamahfooz@linux.microsoft.com>
Link: https://patch.msgid.link/6945b22419c7d404b4954a113de2ac9c900dba93.1779542874.git.me@berkoc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 85db7391310b1304d2dc8ae3b0b12105a9567147 upstream.
chap_server_compute_hash() allocates client_digest as
kzalloc(chap->digest_size) and then, for BASE64-encoded responses,
passes chap_r directly to chap_base64_decode() without checking whether
the input length could produce more than digest_size bytes of output.
chap_base64_decode() writes to the destination unconditionally as long
as there is input to consume. With MAX_RESPONSE_LENGTH set to 128 and
the "0b" prefix stripped by extract_param(), up to 127 base64 characters
can reach the decoder. 127 characters decode to 95 bytes. For SHA-256
(digest_size=32) this overflows client_digest by 63 bytes; for MD5
(digest_size=16) the overflow is 79 bytes.
The length check at line 344 fires after the write has already happened.
The HEX branch in the same switch statement already validates the length
up front. Apply the same approach to the BASE64 branch: strip trailing
base64 padding characters, then reject any input whose data length
exceeds DIV_ROUND_UP(digest_size * 4, 3) before calling the decoder.
Stripping trailing '=' before the comparison handles both padded and
unpadded encodings. chap_base64_decode() already returns early on '=',
so the full original string is still passed to the decoder unchanged.
The mutual CHAP path decodes CHAP_C into initiatorchg_binhex, which is
kzalloc(CHAP_CHALLENGE_STR_LEN). extract_param() caps initiatorchg at
CHAP_CHALLENGE_STR_LEN characters, so at most CHAP_CHALLENGE_STR_LEN-1
base64 characters reach the decoder. The maximum decoded size,
DIV_ROUND_UP((CHAP_CHALLENGE_STR_LEN-1) * 3, 4), is less than
CHAP_CHALLENGE_STR_LEN, so no overflow is possible there. A comment is
added at the call site to document this.
Fixes: 1e5733883421 ("scsi: target: iscsi: Support base64 in CHAP")
Cc: stable@vger.kernel.org
Signed-off-by: Alexandru Hossu <hossu.alexandru@gmail.com>
Reviewed-by: David Disseldorp <ddiss@suse.de>
Link: https://patch.msgid.link/20260521151121.808477-1-hossu.alexandru@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit bf33e01f88388c43e285492a63e539df6ffed64c upstream.
iscsi_encode_text_output() concatenates "key=value\0" records into
login->rsp_buf, an 8192-byte kzalloc(MAX_KEY_VALUE_PAIRS) buffer
allocated in iscsit_alloc_login_setup_buffer(). The three sprintf() call
sites in this function (lines 1398, 1411, 1424 in v7.1-rc2) never check
the remaining buffer capacity:
*length += sprintf(output_buf, "%s=%s", er->key, er->value);
*length += 1;
output_buf = textbuf + *length;
The 8192-byte ceiling at iscsi_target_check_login_request() bounds the
*input* Login PDU payload, but a single PDU can carry up to 2048 minimal
four-byte "a=b\0" pairs, each unknown key expanding to a 16-byte
"a=NotUnderstood\0" output record via iscsi_add_notunderstood_response().
2048 * 16 = 32 KiB of output into an 8 KiB buffer, producing a ~24 KiB
heap overrun in the kmalloc-8k slab.
The fix introduces a static iscsi_encode_text_record() helper that uses
snprintf() with a per-call bounds check against the remaining buffer,
and threads a u32 textbuf_size parameter through
iscsi_encode_text_output(). Both call sites in
iscsi_target_handle_csg_zero() (PHASE_SECURITY) and
iscsi_target_handle_csg_one() (PHASE_OPERATIONAL) pass
MAX_KEY_VALUE_PAIRS. On overflow the encoder logs the condition, calls
iscsi_release_extra_responses() to drop queued records, and returns -1;
both caller sites now emit ISCSI_STATUS_CLS_INITIATOR_ERR /
ISCSI_LOGIN_STATUS_INIT_ERR via iscsit_tx_login_rsp() before returning,
so the initiator sees an explicit failed-login response rather than a
silent connection drop. (Prior to this patch only the PHASE_OPERATIONAL
caller did that; the PHASE_SECURITY caller is converted to the same
shape.)
Fixes: e48354ce078c ("iscsi-target: Add iSCSI fabric support for target v4.1")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Tested-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
