| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
commit 1613462be621ad5103ec338a7b0ca0746ec4e5f1 upstream.
When running in an unprivileged domU under Xen, the privcmd driver
is restricted to allow only hypercalls against a target domain, for
which the current domU is acting as a device model.
Add a boot parameter "unrestricted" to allow all hypercalls (the
hypervisor will still refuse destructive hypercalls affecting other
guests).
Make this new parameter effective only in case the domU wasn't started
using secure boot, as otherwise hypercalls targeting the domU itself
might result in violating the secure boot functionality.
This is achieved by adding another lockdown reason, which can be
tested to not being set when applying the "unrestricted" option.
This is part of XSA-482
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 453b8fb68f3641fea970db88b7d9a153ed2a37e8 upstream.
The Xen privcmd driver allows to issue arbitrary hypercalls from
user space processes. This is normally no problem, as access is
usually limited to root and the hypervisor will deny any hypercalls
affecting other domains.
In case the guest is booted using secure boot, however, the privcmd
driver would be enabling a root user process to modify e.g. kernel
memory contents, thus breaking the secure boot feature.
The only known case where an unprivileged domU is really needing to
use the privcmd driver is the case when it is acting as the device
model for another guest. In this case all hypercalls issued via the
privcmd driver will target that other guest.
Fortunately the privcmd driver can already be locked down to allow
only hypercalls targeting a specific domain, but this mode can be
activated from user land only today.
The target domain can be obtained from Xenstore, so when not running
in dom0 restrict the privcmd driver to that target domain from the
beginning, resolving the potential problem of breaking secure boot.
This is XSA-482
Reported-by: Teddy Astie <teddy.astie@vates.tech>
Fixes: 1c5de1939c20 ("xen: add privcmd driver")
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit e7bae9a7a5e1251ab414291f4e9304d702bb9221 ]
The valid range for the pulses-per-revolution devicetree property is
1..4. The current code checks for a range of 1..5. Fix it.
Declare the variable used to retrieve pulses per revolution from
devicetree as u32 (unsigned) to match the of_property_read_u32() API.
The current code uses a postfix decrement when writing the pulses per
resolution into the chip. This has no effect since the value is evaluated
before it is decremented. Fix it by decrementing before evaluating the
value.
Fixes: 7506ebcd662b ("hwmon: (max6639) : Configure based on DT property")
Cc: Naresh Solanki <naresh.solanki@9elements.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0162ab3220bac870e43e229e6e3024d1a21c3f26 ]
When the i915 driver firmware binaries are not present, the
set_default_submission pointer is not set. This pointer is
dereferenced during suspend anyways.
Add a check to make sure it is set before dereferencing.
[ 23.289926] PM: suspend entry (deep)
[ 23.293558] Filesystems sync: 0.000 seconds
[ 23.298010] Freezing user space processes
[ 23.302771] Freezing user space processes completed (elapsed 0.000 seconds)
[ 23.309766] OOM killer disabled.
[ 23.313027] Freezing remaining freezable tasks
[ 23.318540] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[ 23.342038] serial 00:05: disabled
[ 23.345719] serial 00:02: disabled
[ 23.349342] serial 00:01: disabled
[ 23.353782] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 23.358993] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[ 23.361635] ata1.00: Entering standby power mode
[ 23.368863] ata2.00: Entering standby power mode
[ 23.445187] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ 23.452194] #PF: supervisor instruction fetch in kernel mode
[ 23.457896] #PF: error_code(0x0010) - not-present page
[ 23.463065] PGD 0 P4D 0
[ 23.465640] Oops: Oops: 0010 [#1] SMP NOPTI
[ 23.469869] CPU: 8 UID: 0 PID: 211 Comm: kworker/u48:18 Tainted: G S W 6.19.0-rc4-00020-gf0b9d8eb98df #10 PREEMPT(voluntary)
[ 23.482512] Tainted: [S]=CPU_OUT_OF_SPEC, [W]=WARN
[ 23.496511] Workqueue: async async_run_entry_fn
[ 23.501087] RIP: 0010:0x0
[ 23.503755] Code: Unable to access opcode bytes at 0xffffffffffffffd6.
[ 23.510324] RSP: 0018:ffffb4a60065fca8 EFLAGS: 00010246
[ 23.515592] RAX: 0000000000000000 RBX: ffff9f428290e000 RCX: 000000000000000f
[ 23.522765] RDX: 0000000000000000 RSI: 0000000000000282 RDI: ffff9f428290e000
[ 23.529937] RBP: ffff9f4282907070 R08: ffff9f4281130428 R09: 00000000ffffffff
[ 23.537111] R10: 0000000000000000 R11: 0000000000000001 R12: ffff9f42829070f8
[ 23.544284] R13: ffff9f4282906028 R14: ffff9f4282900000 R15: ffff9f4282906b68
[ 23.551457] FS: 0000000000000000(0000) GS:ffff9f466b2cf000(0000) knlGS:0000000000000000
[ 23.559588] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 23.565365] CR2: ffffffffffffffd6 CR3: 000000031c230001 CR4: 0000000000f70ef0
[ 23.572539] PKRU: 55555554
[ 23.575281] Call Trace:
[ 23.577770] <TASK>
[ 23.579905] intel_engines_reset_default_submission+0x42/0x60
[ 23.585695] __intel_gt_unset_wedged+0x191/0x200
[ 23.590360] intel_gt_unset_wedged+0x20/0x40
[ 23.594675] gt_sanitize+0x15e/0x170
[ 23.598290] i915_gem_suspend_late+0x6b/0x180
[ 23.602692] i915_drm_suspend_late+0x35/0xf0
[ 23.607008] ? __pfx_pci_pm_suspend_late+0x10/0x10
[ 23.611843] dpm_run_callback+0x78/0x1c0
[ 23.615817] device_suspend_late+0xde/0x2e0
[ 23.620037] async_suspend_late+0x18/0x30
[ 23.624082] async_run_entry_fn+0x25/0xa0
[ 23.628129] process_one_work+0x15b/0x380
[ 23.632182] worker_thread+0x2a5/0x3c0
[ 23.635973] ? __pfx_worker_thread+0x10/0x10
[ 23.640279] kthread+0xf6/0x1f0
[ 23.643464] ? __pfx_kthread+0x10/0x10
[ 23.647263] ? __pfx_kthread+0x10/0x10
[ 23.651045] ret_from_fork+0x131/0x190
[ 23.654837] ? __pfx_kthread+0x10/0x10
[ 23.658634] ret_from_fork_asm+0x1a/0x30
[ 23.662597] </TASK>
[ 23.664826] Modules linked in:
[ 23.667914] CR2: 0000000000000000
[ 23.671271] ------------[ cut here ]------------
Signed-off-by: Rahul Bukte <rahul.bukte@sony.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260203044839.1555147-1-suraj.kandpal@intel.com
(cherry picked from commit daa199abc3d3d1740c9e3a2c3e9216ae5b447cad)
Fixes: ff44ad51ebf8 ("drm/i915: Move engine->submit_request selection to a vfunc")
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 39f44f54afa58661ecae9c27e15f5dbce2372892 ]
The ASICREV_IS_BEIGE_GOBY_P check always took precedence, because it includes all chip revisions upto NV_UNKNOWN.
Fixes: 54b822b3eac3 ("drm/amd/display: Use dce_version instead of chip_id")
Signed-off-by: Andy Nguyen <theofficialflow1996@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 9c7be0efa6f0daa949a5f3e3fdf9ea090b0713cb)
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2323b019651ad81c20a0f7f817c63392b3110652 ]
parse_edid_displayid_vrr() searches the EDID extension blocks for a
DisplayID extension before parsing the dynamic video timing range.
The code previously checked whether edid_ext was NULL after the search
loop. However, edid_ext is assigned during each iteration of the loop,
so it will never be NULL once the loop has executed. If no DisplayID
extension is found, edid_ext ends up pointing to the last extension
block, and the NULL check does not correctly detect the failure case.
Instead, check whether the loop completed without finding a matching
DisplayID block by testing "i == edid->extensions". This ensures the
function exits early when no DisplayID extension is present and avoids
parsing an unrelated EDID extension block.
Also simplify the EDID validation check using "!edid ||
!edid->extensions".
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:13079 parse_edid_displayid_vrr() warn: variable dereferenced before check 'edid_ext' (see line 13075)
Fixes: a638b837d0e6 ("drm/amd/display: Fix refresh rate range for some panel")
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Jerry Zuo <jerry.zuo@amd.com>
Cc: Sun peng Li <sunpeng.li@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 91c7e6342e98c846b259c57273436fdea4c043f2)
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit da9ba4dcc01e7cf52b7676f0ee9607b8358c2171 ]
When oops_panic_write is set, the driver disables interrupts and
switches to PIO polling mode but still falls through into the DMA
path. DMA cannot be used reliably in panic context, so make the
DMA path an else branch to ensure only PIO is used during panic
writes.
Fixes: c1ac2dc34b51 ("mtd: rawnand: brcmnand: When oops in progress use pio and interrupt polling")
Signed-off-by: Kamal Dasu <kamal.dasu@broadcom.com>
Reviewed-by: William Zhang <william.zhang@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit bab2bc6e850a697a23b9e5f0e21bb8c187615e95 ]
nand_lock() and nand_unlock() call into chip->ops.lock_area/unlock_area
without holding the NAND device lock. On controllers that implement
SET_FEATURES via multiple low-level PIO commands, these can race with
concurrent UBI/UBIFS background erase/write operations that hold the
device lock, resulting in cmd_pending conflicts on the NAND controller.
Add nand_get_device()/nand_release_device() around the lock/unlock
operations to serialize them against all other NAND controller access.
Fixes: 92270086b7e5 ("mtd: rawnand: Add support for manufacturer specific lock/unlock operation")
Signed-off-by: Kamal Dasu <kamal.dasu@broadcom.com>
Reviewed-by: William Zhang <william.zhang@broadcom.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 17926cd770ec837ed27d9856cf07f2da8dda4131 upstream.
On Octal DTR capable flashes like Micron Xcella the writes cannot start
or end at an odd address in Octal DTR mode. Extra 0xff bytes need to be
appended or prepended to make sure the start address and end address are
even. 0xff is used because on NOR flashes a program operation can only
flip bits from 1 to 0, not the other way round. 0 to 1 flip needs to
happen via erases.
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Reviewed-by: Michael Walle <michael@walle.cc>
Signed-off-by: Luke Wang <ziniu.wang_1@nxp.com>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
Link: https://lore.kernel.org/r/20250708091646.292-2-ziniu.wang_1@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f156b23df6a84efb2f6686156be94d4988568954 upstream.
On Octal DTR capable flashes like Micron Xcella reads cannot start or
end at an odd address in Octal DTR mode. Extra bytes need to be read at
the start or end to make sure both the start address and length remain
even.
To avoid allocating too much extra memory, thereby putting unnecessary
memory pressure on the system, the temporary buffer containing the extra
padding bytes is capped at PAGE_SIZE bytes. The rest of the 2-byte
aligned part should be read directly in the main buffer.
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Reviewed-by: Michael Walle <michael@walle.cc>
Signed-off-by: Luke Wang <ziniu.wang_1@nxp.com>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
Link: https://lore.kernel.org/r/20250708091646.292-1-ziniu.wang_1@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 78a6ee14f8b9e1c8f7c77612122444f3be8dc8cc upstream.
The I2C communication is completely broken on the Armada 3700 platform
since commit 0b01392c18b9 ("i2c: pxa: move to generic GPIO recovery").
For example, on the Methode uDPU board, probing of the two onboard
temperature sensors fails ...
[ 7.271713] i2c i2c-0: using pinctrl states for GPIO recovery
[ 7.277503] i2c i2c-0: PXA I2C adapter
[ 7.282199] i2c i2c-1: using pinctrl states for GPIO recovery
[ 7.288241] i2c i2c-1: PXA I2C adapter
[ 7.292947] sfp sfp-eth1: Host maximum power 3.0W
[ 7.299614] sfp sfp-eth0: Host maximum power 3.0W
[ 7.308178] lm75 1-0048: supply vs not found, using dummy regulator
[ 32.489631] lm75 1-0048: probe with driver lm75 failed with error -121
[ 32.496833] lm75 1-0049: supply vs not found, using dummy regulator
[ 82.890614] lm75 1-0049: probe with driver lm75 failed with error -121
... and accessing the plugged-in SFP modules also does not work:
[ 511.298537] sfp sfp-eth1: please wait, module slow to respond
[ 536.488530] sfp sfp-eth0: please wait, module slow to respond
...
[ 1065.688536] sfp sfp-eth1: failed to read EEPROM: -EREMOTEIO
[ 1090.888532] sfp sfp-eth0: failed to read EEPROM: -EREMOTEIO
After a discussion [1], there was an attempt to fix the problem by
reverting the offending change by commit 7b211c767121 ("Revert "i2c:
pxa: move to generic GPIO recovery""), but that only helped to fix
the issue in the 6.1.y stable tree. The reason behind the partial succes
is that there was another change in commit 20cb3fce4d60 ("i2c: Set i2c
pinctrl recovery info from it's device pinctrl") in the 6.3-rc1 cycle
which broke things further.
The cause of the problem is the same in case of both offending commits
mentioned above. Namely, the I2C core code changes the pinctrl state to
GPIO while running the recovery initialization code. Although the PXA
specific initialization also does this, but the key difference is that
it happens before the controller is getting enabled in i2c_pxa_reset(),
whereas in the case of the generic initialization it happens after that.
Change the code to reset the controller only before the first transfer
instead of before registering the controller. This ensures that the
controller is not enabled at the time when the generic recovery code
performs the pinctrl state changes, thus avoids the problem described
above.
As the result this change restores the original behaviour, which in
turn makes the I2C communication to work again as it can be seen from
the following log:
[ 7.363250] i2c i2c-0: using pinctrl states for GPIO recovery
[ 7.369041] i2c i2c-0: PXA I2C adapter
[ 7.373673] i2c i2c-1: using pinctrl states for GPIO recovery
[ 7.379742] i2c i2c-1: PXA I2C adapter
[ 7.384506] sfp sfp-eth1: Host maximum power 3.0W
[ 7.393013] sfp sfp-eth0: Host maximum power 3.0W
[ 7.399266] lm75 1-0048: supply vs not found, using dummy regulator
[ 7.407257] hwmon hwmon0: temp1_input not attached to any thermal zone
[ 7.413863] lm75 1-0048: hwmon0: sensor 'tmp75c'
[ 7.418746] lm75 1-0049: supply vs not found, using dummy regulator
[ 7.426371] hwmon hwmon1: temp1_input not attached to any thermal zone
[ 7.432972] lm75 1-0049: hwmon1: sensor 'tmp75c'
[ 7.755092] sfp sfp-eth1: module MENTECHOPTO POS22-LDCC-KR rev 1.0 sn MNC208U90009 dc 200828
[ 7.764997] mvneta d0040000.ethernet eth1: unsupported SFP module: no common interface modes
[ 7.785362] sfp sfp-eth0: module Mikrotik S-RJ01 rev 1.0 sn 61B103C55C58 dc 201022
[ 7.803426] hwmon hwmon2: temp1_input not attached to any thermal zone
Link: https://lore.kernel.org/r/20230926160255.330417-1-robert.marko@sartura.hr #1
Cc: stable@vger.kernel.org # 6.3+
Fixes: 20cb3fce4d60 ("i2c: Set i2c pinctrl recovery info from it's device pinctrl")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Tested-by: Robert Marko <robert.marko@sartura.hr>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260226-i2c-pxa-fix-i2c-communication-v4-1-797a091dae87@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit be627abcc0d5dbd5882873bd85fbc18aa3d189ed upstream.
In the commit in Fixes:, when the code has been updated to use an explicit
for loop, instead of for_each_available_child_of_node(), the assumption
that a reference to a device_node structure would be released at each
iteration has been broken.
Now, an explicit of_node_put() is needed to release the reference.
Fixes: 095561f476ab ("i2c: fsi: Create busses for all ports")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: <stable@vger.kernel.org> # v5.3+
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/fd805c39f8de51edf303856103d782138a1633c8.1772382022.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit aa79f996eb41e95aed85a1bd7f56bcd6a3842008 upstream.
The cp2615 driver uses the USB device serial string as the i2c adapter
name but does not make sure that the string exists.
Verify that the device has a serial number before accessing it to avoid
triggering a NULL-pointer dereference (e.g. with malicious devices).
Fixes: 4a7695429ead ("i2c: cp2615: add i2c driver for Silicon Labs' CP2615 Digital Audio Bridge")
Cc: stable@vger.kernel.org # 5.13
Cc: Bence Csókás <bence98@sch.bme.hu>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Bence Csókás <bence98@sch.bme.hu>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260309075016.25612-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit cd644b805da8a253198718741bf363c4c58862ff upstream.
The Fintek F81532A/534A/535/536 family relies on the
F81534A_CTRL_CMD_ENABLE_PORT (116h) register during initialization to
both determine serial port status and control port creation. If the
driver experiences fast load/unload cycles, the device state may becomes
unstable, resulting in the incomplete generation of serial ports.
Performing a dummy read operation on the register prior to the initial
write command resolves the issue. This clears the device's stale internal
state. Subsequent write operations will correctly generate all serial
ports.
This patch also removes the retry loop in f81534a_ctrl_set_register()
because the stale state has been fixed.
Tested on: HygonDM1SLT(Hygon C86 3250 8-core Processor)
Signed-off-by: Ji-Ze Hong (Peter Hong) <peter_hong@fintek.com.tw>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7caac659a837af9fd4cad85be851982b88859484 upstream.
PSR entry_setup_frames is currently computed directly into struct
intel_dp:intel_psr:entry_setup_frames. This causes a problem if mode change
gets rejected after PSR compute config: Psr_entry_setup_frames computed for
this rejected state is in intel_dp:intel_psr:entry_setup_frame. Fix this by
computing it into intel_crtc_state and copy the value into
intel_dp:intel_psr:entry_setup_frames on PSR enable.
Fixes: 2b981d57e480 ("drm/i915/display: Support PSR entry VSC packet to be transmitted one frame earlier")
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: <stable@vger.kernel.org> # v6.8+
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260312083710.1593781-3-jouni.hogander@intel.com
(cherry picked from commit 8c229b4aa00262c13787982e998c61c0783285e0)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
[ dropped intel_psr_needs_wa_18037818876 hunk and adjusted surrounding context ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 86259558e422b250aa6aa57163a6d759074573f5 upstream.
isl68137_avs_enable_show_page() uses the return value of
pmbus_read_byte_data() without checking for errors. If the I2C transaction
fails, a negative error code is passed through bitwise operations,
producing incorrect output.
Add an error check to propagate the return value if it is negative.
Additionally, modernize the callback by replacing sprintf()
with sysfs_emit().
Fixes: 038a9c3d1e424 ("hwmon: (pmbus/isl68137) Add driver for Intersil ISL68137 PWM Controller")
Cc: stable@vger.kernel.org
Signed-off-by: Sanman Pradhan <psanman@juniper.net>
Link: https://lore.kernel.org/r/20260318193952.47908-2-sanman.pradhan@hpe.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 19d4b9c8a136704d5f2544e7ac550f27918a5004 upstream.
mp2973_read_word_data() XORs the return value of pmbus_read_word_data()
with PB_STATUS_POWER_GOOD_N without first checking for errors. If the I2C
transaction fails, a negative error code is XORed with the constant,
producing a corrupted value that is returned as valid status data instead
of propagating the error.
Add the missing error check before modifying the return value.
Fixes: acda945afb465 ("hwmon: (pmbus/mp2975) Fix PGOOD in READ_STATUS_WORD")
Cc: stable@vger.kernel.org
Signed-off-by: Sanman Pradhan <psanman@juniper.net>
Link: https://lore.kernel.org/r/20260317173308.382545-3-sanman.pradhan@hpe.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit b48731849609cbd8c53785a48976850b443153fd ]
Smatch reports:
drivers/net/dsa/bcm_sf2.c:997 bcm_sf2_sw_resume() warn:
'priv->clk' from clk_prepare_enable() not released on lines: 983,990.
The clock enabled by clk_prepare_enable() in bcm_sf2_sw_resume()
is not released if bcm_sf2_sw_rst() or bcm_sf2_cfp_resume() fails.
Add the missing clk_disable_unprepare() calls in the error paths
to properly release the clock resource.
Fixes: e9ec5c3bd238 ("net: dsa: bcm_sf2: request and handle clocks")
Reviewed-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Anas Iqbal <mohd.abd.6602@gmail.com>
Link: https://patch.msgid.link/20260318084212.1287-1-mohd.abd.6602@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8a63baadf08453f66eb582fdb6dd234f72024723 ]
mvpp2_bm_switch_buffers() unconditionally calls
mvpp2_bm_pool_update_priv_fc() when switching between per-cpu and
shared buffer pool modes. This function programs CM3 flow control
registers via mvpp2_cm3_read()/mvpp2_cm3_write(), which dereference
priv->cm3_base without any NULL check.
When the CM3 SRAM resource is not present in the device tree (the
third reg entry added by commit 60523583b07c ("dts: marvell: add CM3
SRAM memory to cp11x ethernet device tree")), priv->cm3_base remains
NULL and priv->global_tx_fc is false. Any operation that triggers
mvpp2_bm_switch_buffers(), for example an MTU change that crosses
the jumbo frame threshold, will crash:
Unable to handle kernel NULL pointer dereference at
virtual address 0000000000000000
Mem abort info:
ESR = 0x0000000096000006
EC = 0x25: DABT (current EL), IL = 32 bits
pc : readl+0x0/0x18
lr : mvpp2_cm3_read.isra.0+0x14/0x20
Call trace:
readl+0x0/0x18
mvpp2_bm_pool_update_fc+0x40/0x12c
mvpp2_bm_pool_update_priv_fc+0x94/0xd8
mvpp2_bm_switch_buffers.isra.0+0x80/0x1c0
mvpp2_change_mtu+0x140/0x380
__dev_set_mtu+0x1c/0x38
dev_set_mtu_ext+0x78/0x118
dev_set_mtu+0x48/0xa8
dev_ifsioc+0x21c/0x43c
dev_ioctl+0x2d8/0x42c
sock_ioctl+0x314/0x378
Every other flow control call site in the driver already guards
hardware access with either priv->global_tx_fc or port->tx_fc.
mvpp2_bm_switch_buffers() is the only place that omits this check.
Add the missing priv->global_tx_fc guard to both the disable and
re-enable calls in mvpp2_bm_switch_buffers(), consistent with the
rest of the driver.
Fixes: 3a616b92a9d1 ("net: mvpp2: Add TX flow control support for jumbo frames")
Signed-off-by: Muhammad Hammad Ijaz <mhijaz@amazon.com>
Reviewed-by: Gunnar Kudrjavets <gunnarku@amazon.com>
Link: https://patch.msgid.link/20260316193157.65748-1-mhijaz@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 605b52497bf89b3b154674deb135da98f916e390 ]
rlb_clear_slave intentionally keeps RLB hash-table entries on
the rx_hashtbl_used_head list with slave set to NULL when no
replacement slave is available. However, bond_debug_rlb_hash_show
visites client_info->slave without checking if it's NULL.
Other used-list iterators in bond_alb.c already handle this NULL-slave
state safely:
- rlb_update_client returns early on !client_info->slave
- rlb_req_update_slave_clients, rlb_clear_slave, and rlb_rebalance
compare slave values before visiting
- lb_req_update_subnet_clients continues if slave is NULL
The following NULL deref crash can be trigger in
bond_debug_rlb_hash_show:
[ 1.289791] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ 1.292058] RIP: 0010:bond_debug_rlb_hash_show (drivers/net/bonding/bond_debugfs.c:41)
[ 1.293101] RSP: 0018:ffffc900004a7d00 EFLAGS: 00010286
[ 1.293333] RAX: 0000000000000000 RBX: ffff888102b48200 RCX: ffff888102b48204
[ 1.293631] RDX: ffff888102b48200 RSI: ffffffff839daad5 RDI: ffff888102815078
[ 1.293924] RBP: ffff888102815078 R08: ffff888102b4820e R09: 0000000000000000
[ 1.294267] R10: 0000000000000000 R11: 0000000000000000 R12: ffff888100f929c0
[ 1.294564] R13: ffff888100f92a00 R14: 0000000000000001 R15: ffffc900004a7ed8
[ 1.294864] FS: 0000000001395380(0000) GS:ffff888196e75000(0000) knlGS:0000000000000000
[ 1.295239] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1.295480] CR2: 0000000000000000 CR3: 0000000102adc004 CR4: 0000000000772ef0
[ 1.295897] Call Trace:
[ 1.296134] seq_read_iter (fs/seq_file.c:231)
[ 1.296341] seq_read (fs/seq_file.c:164)
[ 1.296493] full_proxy_read (fs/debugfs/file.c:378 (discriminator 1))
[ 1.296658] vfs_read (fs/read_write.c:572)
[ 1.296981] ksys_read (fs/read_write.c:717)
[ 1.297132] do_syscall_64 (arch/x86/entry/syscall_64.c:63 (discriminator 1) arch/x86/entry/syscall_64.c:94 (discriminator 1))
[ 1.297325] entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
Add a NULL check and print "(none)" for entries with no assigned slave.
Fixes: caafa84251b88 ("bonding: add the debugfs interface to see RLB hash table")
Reported-by: Weiming Shi <bestswngs@gmail.com>
Signed-off-by: Xiang Mei <xmei5@asu.edu>
Link: https://patch.msgid.link/20260317005034.1888794-1-xmei5@asu.edu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit beb6e2e5976a128b0cccf10d158124422210c5ef ]
In IPSec full offload mode, the device reports an ESN (Extended
Sequence Number) wrap event to the driver. The driver validates this
event by querying the IPSec ASO and checking that the esn_event_arm
field is 0x0, which indicates an event has occurred. After handling
the event, the driver must re-arm the context by setting esn_event_arm
back to 0x1.
A race condition exists in this handling path. After validating the
event, the driver calls mlx5_accel_esp_modify_xfrm() to update the
kernel's xfrm state. This function temporarily releases and
re-acquires the xfrm state lock.
So, need to acknowledge the event first by setting esn_event_arm to
0x1. This prevents the driver from reprocessing the same ESN update if
the hardware sends events for other reason. Since the next ESN update
only occurs after nearly 2^31 packets are received, there's no risk of
missing an update, as it will happen long after this handling has
finished.
Processing the event twice causes the ESN high-order bits (esn_msb) to
be incremented incorrectly. The driver then programs the hardware with
this invalid ESN state, which leads to anti-replay failures and a
complete halt of IPSec traffic.
Fix this by re-arming the ESN event immediately after it is validated,
before calling mlx5_accel_esp_modify_xfrm(). This ensures that any
spurious, duplicate events are correctly ignored, closing the race
window.
Fixes: fef06678931f ("net/mlx5e: Fix ESN update kernel panic")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260316094603.6999-4-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 99b36850d881e2d65912b2520a1c80d0fcc9429a ]
The query or updating IPSec offload object is through Access ASO WQE.
The driver uses a single mlx5e_ipsec_aso struct for each PF, which
contains a shared DMA-mapped context for all ASO operations.
A race condition exists because the ASO spinlock is released before
the hardware has finished processing WQE. If a second operation is
initiated immediately after, it overwrites the shared context in the
DMA area.
When the first operation's completion is processed later, it reads
this corrupted context, leading to unexpected behavior and incorrect
results.
This commit fixes the race by introducing a private context within
each IPSec offload object. The shared ASO context is now copied to
this private context while the ASO spinlock is held. Subsequent
processing uses this saved, per-object context, ensuring its integrity
is maintained.
Fixes: 1ed78fc03307 ("net/mlx5e: Update IPsec soft and hard limits")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260316094603.6999-3-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b7e3a5d9c0d66b7fb44f63aef3bd734821afa0c8 ]
A lock dependency cycle exists where:
1. mlx5_ib_roce_init -> mlx5_core_uplink_netdev_event_replay ->
mlx5_blocking_notifier_call_chain (takes notifier_rwsem) ->
mlx5e_mdev_notifier_event -> mlx5_netdev_notifier_register ->
register_netdevice_notifier_dev_net (takes rtnl)
=> notifier_rwsem -> rtnl
2. mlx5e_probe -> _mlx5e_probe ->
mlx5_core_uplink_netdev_set (takes uplink_netdev_lock) ->
mlx5_blocking_notifier_call_chain (takes notifier_rwsem)
=> uplink_netdev_lock -> notifier_rwsem
3: devlink_nl_rate_set_doit -> devlink_nl_rate_set ->
mlx5_esw_devlink_rate_leaf_tx_max_set -> esw_qos_devlink_rate_to_mbps ->
mlx5_esw_qos_max_link_speed_get (takes rtnl) ->
mlx5_esw_qos_lag_link_speed_get_locked ->
mlx5_uplink_netdev_get (takes uplink_netdev_lock)
=> rtnl -> uplink_netdev_lock
=> BOOM! (lock cycle)
Fix that by restricting the rtnl-protected section to just the necessary
part, the call to netdev_master_upper_dev_get and speed querying, so
that the last lock dependency is avoided and the cycle doesn't close.
This is safe because mlx5_uplink_netdev_get uses netdev_hold to keep the
uplink netdev alive while its master device is queried.
Use this opportunity to rename the ambiguously-named "hold_rtnl_lock"
argument to "take_rtnl" and remove the "_locked" suffix from
mlx5_esw_qos_lag_link_speed_get_locked.
Fixes: 6b4be64fd9fe ("net/mlx5e: Harden uplink netdev access against device unbind")
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260316094603.6999-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 34b11cc56e4369bc08b1f4c4a04222d75ed596ce ]
If hardware doesn't support RX Flow Filters, rx_fs_lock spinlock is not
initialized leading to the following assertion splat triggerable via
set_rxnfc callback.
INFO: trying to register non-static key.
The code is fine but needs lockdep annotation, or maybe
you didn't initialize this object before use?
turning off the locking correctness validator.
CPU: 1 PID: 949 Comm: syz.0.6 Not tainted 6.1.164+ #113
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.1-0-g3208b098f51a-prebuilt.qemu.org 04/01/2014
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x8d/0xba lib/dump_stack.c:106
assign_lock_key kernel/locking/lockdep.c:974 [inline]
register_lock_class+0x141b/0x17f0 kernel/locking/lockdep.c:1287
__lock_acquire+0x74f/0x6c40 kernel/locking/lockdep.c:4928
lock_acquire kernel/locking/lockdep.c:5662 [inline]
lock_acquire+0x190/0x4b0 kernel/locking/lockdep.c:5627
__raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline]
_raw_spin_lock_irqsave+0x33/0x50 kernel/locking/spinlock.c:162
gem_del_flow_filter drivers/net/ethernet/cadence/macb_main.c:3562 [inline]
gem_set_rxnfc+0x533/0xac0 drivers/net/ethernet/cadence/macb_main.c:3667
ethtool_set_rxnfc+0x18c/0x280 net/ethtool/ioctl.c:961
__dev_ethtool net/ethtool/ioctl.c:2956 [inline]
dev_ethtool+0x229c/0x6290 net/ethtool/ioctl.c:3095
dev_ioctl+0x637/0x1070 net/core/dev_ioctl.c:510
sock_do_ioctl+0x20d/0x2c0 net/socket.c:1215
sock_ioctl+0x577/0x6d0 net/socket.c:1320
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:870 [inline]
__se_sys_ioctl fs/ioctl.c:856 [inline]
__x64_sys_ioctl+0x18c/0x210 fs/ioctl.c:856
do_syscall_x64 arch/x86/entry/common.c:46 [inline]
do_syscall_64+0x35/0x80 arch/x86/entry/common.c:76
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
A more straightforward solution would be to always initialize rx_fs_lock,
just like rx_fs_list. However, in this case the driver set_rxnfc callback
would return with a rather confusing error code, e.g. -EINVAL. So deny
set_rxnfc attempts directly if the RX filtering feature is not supported
by hardware.
Fixes: ae8223de3df5 ("net: macb: Added support for RX filtering")
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Link: https://patch.msgid.link/20260316103826.74506-2-pchelkin@ispras.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit bf504b229cb8d534eccbaeaa23eba34c05131e25 ]
After commi f132e089fe89 ("ACPI: processor: Fix NULL-pointer dereference
in acpi_processor_errata_piix4()"), device pointers may be dereferenced
after dropping references to the device objects pointed to by them,
which may cause a use-after-free to occur.
Moreover, debug messages about enabling the errata may be printed
if the errata flags corresponding to them are unset.
Address all of these issues by moving message printing to the points
in the code where the errata flags are set.
Fixes: f132e089fe89 ("ACPI: processor: Fix NULL-pointer dereference in acpi_processor_errata_piix4()")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Closes: https://lore.kernel.org/linux-acpi/938e2206-def5-4b7a-9b2c-d1fd37681d8a@roeck-us.net/
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/5975693.DvuYhMxLoT@rafael.j.wysocki
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit deb353d9bb009638b7762cae2d0b6e8fdbb41a69 ]
Since upstream commit e75665dd0968 ("wifi: wlcore: ensure skb headroom
before skb_push"), wl1271_tx_allocate() and with it
wl1271_prepare_tx_frame() returns -EAGAIN if pskb_expand_head() fails.
However, in wlcore_tx_work_locked(), a return value of -EAGAIN from
wl1271_prepare_tx_frame() is interpreted as the aggregation buffer being
full. This causes the code to flush the buffer, put the skb back at the
head of the queue, and immediately retry the same skb in a tight while
loop.
Because wlcore_tx_work_locked() holds wl->mutex, and the retry happens
immediately with GFP_ATOMIC, this will result in an infinite loop and a
CPU soft lockup. Return -ENOMEM instead so the packet is dropped and
the loop terminates.
The problem was found by an experimental code review agent based on
gemini-3.1-pro while reviewing backports into v6.18.y.
Assisted-by: Gemini:gemini-3.1-pro
Fixes: e75665dd0968 ("wifi: wlcore: ensure skb headroom before skb_push")
Cc: Peter Astrand <astrand@lysator.liu.se>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Link: https://patch.msgid.link/20260318064636.3065925-1-linux@roeck-us.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit fc9c69be594756b81b54c6bc40803fa6052f35ae ]
When iavf_add_vlan() finds an existing filter in IAVF_VLAN_REMOVE
state, it transitions the filter to IAVF_VLAN_ACTIVE assuming the
pending delete can simply be cancelled. However, there is no guarantee
that iavf_del_vlans() has not already processed the delete AQ request
and removed the filter from the PF. In that case the filter remains in
the driver's list as IAVF_VLAN_ACTIVE but is no longer programmed on
the NIC. Since iavf_add_vlans() only picks up filters in
IAVF_VLAN_ADD state, the filter is never re-added, and spoof checking
drops all traffic for that VLAN.
CPU0 CPU1 Workqueue
---- ---- ---------
iavf_del_vlan(vlan 100)
f->state = REMOVE
schedule AQ_DEL_VLAN
iavf_add_vlan(vlan 100)
f->state = ACTIVE
iavf_del_vlans()
f is ACTIVE, skip
iavf_add_vlans()
f is ACTIVE, skip
Filter is ACTIVE in driver but absent from NIC.
Transition to IAVF_VLAN_ADD instead and schedule
IAVF_FLAG_AQ_ADD_VLAN_FILTER so iavf_add_vlans() re-programs the
filter. A duplicate add is idempotent on the PF.
Fixes: 0c0da0e95105 ("iavf: refactor VLAN filter states")
Signed-off-by: Petr Oros <poros@redhat.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 45b33e805bd39f615d9353a7194b2da5281332df ]
If an XDP application that requested TX timestamping is shutting down
while the link of the interface in use is still up the following kernel
splat is reported:
[ 883.803618] [ T1554] BUG: unable to handle page fault for address: ffffcfb6200fd008
...
[ 883.803650] [ T1554] Call Trace:
[ 883.803652] [ T1554] <TASK>
[ 883.803654] [ T1554] igc_ptp_tx_tstamp_event+0xdf/0x160 [igc]
[ 883.803660] [ T1554] igc_tsync_interrupt+0x2d5/0x300 [igc]
...
During shutdown of the TX ring the xsk_meta pointers are left behind, so
that the IRQ handler is trying to touch them.
This issue is now being fixed by cleaning up the stale xsk meta data on
TX shutdown. TX timestamps on other queues remain unaffected.
Fixes: 15fd021bc427 ("igc: Add Tx hardware timestamp request for AF_XDP zero-copy packet")
Signed-off-by: Zdenek Bouska <zdenek.bouska@siemens.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Florian Bezdeka <florian.bezdeka@siemens.com>
Tested-by: Avigail Dahan <avigailx.dahan@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0ffba246652faf4a36aedc66059c2f94e4c83ea5 ]
igc_xmit_frame() misses updating skb->tail when the packet size is
shorter than the minimum one.
Use skb_put_padto() in alignment with other Intel Ethernet drivers.
Fixes: 0507ef8a0372 ("igc: Add transmit and receive fastpath and interrupt handlers")
Signed-off-by: Kohei Enju <kohei@enjuk.jp>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Avigail Dahan <avigailx.dahan@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 069c8f5aebe4d5224cf62acc7d4b3486091c658a ]
syzbot reports "task hung in rpm_resume"
This is caused by aqc111_suspend calling
the PM variant of its write_cmd routine.
The simplified call trace looks like this:
rpm_suspend()
usb_suspend_both() - here udev->dev.power.runtime_status == RPM_SUSPENDING
aqc111_suspend() - called for the usb device interface
aqc111_write32_cmd()
usb_autopm_get_interface()
pm_runtime_resume_and_get()
rpm_resume() - here we call rpm_resume() on our parent
rpm_resume() - Here we wait for a status change that will never happen.
At this point we block another task which holds
rtnl_lock and locks up the whole networking stack.
Fix this by replacing the write_cmd calls with their _nopm variants
Reported-by: syzbot+48dc1e8dfc92faf1124c@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=48dc1e8dfc92faf1124c
Fixes: e58ba4544c77 ("net: usb: aqc111: Add support for wake on LAN by MAGIC packet")
Signed-off-by: Nikola Z. Ivanov <zlatistiv@gmail.com>
Link: https://patch.msgid.link/20260313141643.1181386-1-zlatistiv@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 77914255155e68a20aa41175edeecf8121dac391 ]
The same bounds-check bug fixed for NDP16 in the previous patch also
exists in cdc_ncm_rx_verify_ndp32(). The DPE array size is validated
against the total skb length without accounting for ndpoffset, allowing
out-of-bounds reads when the NDP32 is placed near the end of the NTB.
Add ndpoffset to the nframes bounds check and use struct_size_t() to
express the NDP-plus-DPE-array size more clearly.
Compile-tested only.
Fixes: 0fa81b304a79 ("cdc_ncm: Implement the 32-bit version of NCM Transfer Block")
Signed-off-by: Tobi Gaertner <tob.gaertner@me.com>
Link: https://patch.msgid.link/20260314054640.2895026-3-tob.gaertner@me.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2aa8a4fa8d5b7d0e1ebcec100e1a4d80a1f4b21a ]
cdc_ncm_rx_verify_ndp16() validates that the NDP header and its DPE
entries fit within the skb. The first check correctly accounts for
ndpoffset:
if ((ndpoffset + sizeof(struct usb_cdc_ncm_ndp16)) > skb_in->len)
but the second check omits it:
if ((sizeof(struct usb_cdc_ncm_ndp16) +
ret * (sizeof(struct usb_cdc_ncm_dpe16))) > skb_in->len)
This validates the DPE array size against the total skb length as if
the NDP were at offset 0, rather than at ndpoffset. When the NDP is
placed near the end of the NTB (large wNdpIndex), the DPE entries can
extend past the skb data buffer even though the check passes.
cdc_ncm_rx_fixup() then reads out-of-bounds memory when iterating
the DPE array.
Add ndpoffset to the nframes bounds check and use struct_size_t() to
express the NDP-plus-DPE-array size more clearly.
Fixes: ff06ab13a4cc ("net: cdc_ncm: splitting rx_fixup for code reuse")
Signed-off-by: Tobi Gaertner <tob.gaertner@me.com>
Link: https://patch.msgid.link/20260314054640.2895026-2-tob.gaertner@me.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d4a533ad249e9fbdc2d0633f2ddd60a5b3a9a4ca ]
Do not run airoha_dev_stop routine explicitly in airoha_remove()
since ndo_stop() callback is already executed by unregister_netdev() in
__dev_close_many routine if necessary and, doing so, we will end up causing
an underflow in the qdma users atomic counters. Rely on networking subsystem
to stop the device removing the airoha_eth module.
Fixes: 23020f0493270 ("net: airoha: Introduce ethernet support for EN7581 SoC")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260313-airoha-remove-ndo_stop-remove-net-v2-1-67542c3ceeca@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3affa310de523d63e52ea8e2efb3c476df29e414 ]
In order to avoid any possible race, read completion queue head and
pending entry in airoha_qdma_tx_napi_poll routine instead of doing it in
airoha_irq_handler. Remove unused airoha_tx_irq_queue unused fields.
This is a preliminary patch to add Qdisc offload for airoha_eth driver.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20241029-airoha-en7581-tx-napi-work-v1-1-96ad1686b946@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: d4a533ad249e ("net: airoha: Remove airoha_dev_stop() in airoha_remove()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8e38e08f2c560328a873c35aff1a0dbea6a7d084 ]
Align PSE memory configuration to vendor SDK. In particular, increase
initial value of PSE reserved memory in airoha_fe_pse_ports_init()
routine by the value used for the second Packet Processor Engine (PPE2)
and do not overwrite the default value.
Introduced by commit 23020f049327 ("net: airoha: Introduce ethernet support
for EN7581 SoC")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241001-airoha-eth-pse-fix-v2-2-9a56cdffd074@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: d4a533ad249e ("net: airoha: Remove airoha_dev_stop() in airoha_remove()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1f3e7ff4f296af1f4350f457d5bd82bc825e645a ]
Store the default value for the number of PSE reserved pages in orig_val
at the beginning of airoha_fe_set_pse_oq_rsv routine, before updating it
with airoha_fe_set_pse_queue_rsv_pages().
Introduce airoha_fe_get_pse_all_rsv utility routine.
Introduced by commit 23020f049327 ("net: airoha: Introduce ethernet support
for EN7581 SoC")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241001-airoha-eth-pse-fix-v2-1-9a56cdffd074@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: d4a533ad249e ("net: airoha: Remove airoha_dev_stop() in airoha_remove()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b7405dcf7385445e10821777143f18c3ce20fa04 ]
bond_header_parse() can loop if a stack of two bonding devices is setup,
because skb->dev always points to the hierarchy top.
Add new "const struct net_device *dev" parameter to
(struct header_ops)->parse() method to make sure the recursion
is bounded, and that the final leaf parse method is called.
Fixes: 950803f72547 ("bonding: fix type confusion in bond_setup_by_slave()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiayuan Chen <jiayuan.chen@shopee.com>
Tested-by: Jiayuan Chen <jiayuan.chen@shopee.com>
Cc: Jay Vosburgh <jv@jvosburgh.net>
Cc: Andrew Lunn <andrew+netdev@lunn.ch>
Link: https://patch.msgid.link/20260315104152.1436867-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 29ab768277617452d88c0607c9299cdc63b6e9ff ]
The following code in pm_runtime_work() may dereference the dev->parent
pointer after the parent device has been freed:
/* Maybe the parent is now able to suspend. */
if (parent && !parent->power.ignore_children) {
spin_unlock(&dev->power.lock);
spin_lock(&parent->power.lock);
rpm_idle(parent, RPM_ASYNC);
spin_unlock(&parent->power.lock);
spin_lock(&dev->power.lock);
}
Fix this by inserting a flush_work() call in pm_runtime_remove().
Without this patch blktest block/001 triggers the following complaint
sporadically:
BUG: KASAN: slab-use-after-free in lock_acquire+0x70/0x160
Read of size 1 at addr ffff88812bef7198 by task kworker/u553:1/3081
Workqueue: pm pm_runtime_work
Call Trace:
<TASK>
dump_stack_lvl+0x61/0x80
print_address_description.constprop.0+0x8b/0x310
print_report+0xfd/0x1d7
kasan_report+0xd8/0x1d0
__kasan_check_byte+0x42/0x60
lock_acquire.part.0+0x38/0x230
lock_acquire+0x70/0x160
_raw_spin_lock+0x36/0x50
rpm_suspend+0xc6a/0xfe0
rpm_idle+0x578/0x770
pm_runtime_work+0xee/0x120
process_one_work+0xde3/0x1410
worker_thread+0x5eb/0xfe0
kthread+0x37b/0x480
ret_from_fork+0x6cb/0x920
ret_from_fork_asm+0x11/0x20
</TASK>
Allocated by task 4314:
kasan_save_stack+0x2a/0x50
kasan_save_track+0x18/0x40
kasan_save_alloc_info+0x3d/0x50
__kasan_kmalloc+0xa0/0xb0
__kmalloc_noprof+0x311/0x990
scsi_alloc_target+0x122/0xb60 [scsi_mod]
__scsi_scan_target+0x101/0x460 [scsi_mod]
scsi_scan_channel+0x179/0x1c0 [scsi_mod]
scsi_scan_host_selected+0x259/0x2d0 [scsi_mod]
store_scan+0x2d2/0x390 [scsi_mod]
dev_attr_store+0x43/0x80
sysfs_kf_write+0xde/0x140
kernfs_fop_write_iter+0x3ef/0x670
vfs_write+0x506/0x1470
ksys_write+0xfd/0x230
__x64_sys_write+0x76/0xc0
x64_sys_call+0x213/0x1810
do_syscall_64+0xee/0xfc0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
Freed by task 4314:
kasan_save_stack+0x2a/0x50
kasan_save_track+0x18/0x40
kasan_save_free_info+0x3f/0x50
__kasan_slab_free+0x67/0x80
kfree+0x225/0x6c0
scsi_target_dev_release+0x3d/0x60 [scsi_mod]
device_release+0xa3/0x220
kobject_cleanup+0x105/0x3a0
kobject_put+0x72/0xd0
put_device+0x17/0x20
scsi_device_dev_release+0xacf/0x12c0 [scsi_mod]
device_release+0xa3/0x220
kobject_cleanup+0x105/0x3a0
kobject_put+0x72/0xd0
put_device+0x17/0x20
scsi_device_put+0x7f/0xc0 [scsi_mod]
sdev_store_delete+0xa5/0x120 [scsi_mod]
dev_attr_store+0x43/0x80
sysfs_kf_write+0xde/0x140
kernfs_fop_write_iter+0x3ef/0x670
vfs_write+0x506/0x1470
ksys_write+0xfd/0x230
__x64_sys_write+0x76/0xc0
x64_sys_call+0x213/0x1810
Reported-by: Ming Lei <ming.lei@redhat.com>
Closes: https://lore.kernel.org/all/ZxdNvLNI8QaOfD2d@fedora/
Reported-by: syzbot+6c905ab800f20cf4086c@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/68c13942.050a0220.2ff435.000b.GAE@google.com/
Fixes: 5e928f77a09a ("PM: Introduce core framework for run-time PM of I/O devices (rev. 17)")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260312182720.2776083-1-bvanassche@acm.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
teardown
[ Upstream commit fa103fc8f56954a60699a29215cb713448a39e87 ]
A potential race condition exists in mana_hwc_destroy_channel() where
hwc->caller_ctx is freed before the HWC's Completion Queue (CQ) and
Event Queue (EQ) are destroyed. This allows an in-flight CQ interrupt
handler to dereference freed memory, leading to a use-after-free or
NULL pointer dereference in mana_hwc_handle_resp().
mana_smc_teardown_hwc() signals the hardware to stop but does not
synchronize against IRQ handlers already executing on other CPUs. The
IRQ synchronization only happens in mana_hwc_destroy_cq() via
mana_gd_destroy_eq() -> mana_gd_deregister_irq(). Since this runs
after kfree(hwc->caller_ctx), a concurrent mana_hwc_rx_event_handler()
can dereference freed caller_ctx (and rxq->msg_buf) in
mana_hwc_handle_resp().
Fix this by reordering teardown to reverse-of-creation order: destroy
the TX/RX work queues and CQ/EQ before freeing hwc->caller_ctx. This
ensures all in-flight interrupt handlers complete before the memory they
access is freed.
Fixes: ca9c54d2d6a5 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)")
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Dipayaan Roy <dipayanroy@linux.microsoft.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/abHA3AjNtqa1nx9k@linuxonhyperv3.guj3yctzbm1etfxqx2vob5hsef.xx.internal.cloudapp.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6cfc3bc02b977f2fba5f7268e6504d1931a774f7 ]
Some systems require more than 5ms to get into WoL mode. Increase the
timeout value to 50ms.
Fixes: c51de7f3976b ("net: bcmgenet: add Wake-on-LAN support code")
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20260312191852.3904571-1-justin.chen@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 99b2c531e0e797119ae1b9195a8764ee98b00e65 ]
WCN3998 uses a bit different format for rom version:
[ 5.479978] Bluetooth: hci0: setting up wcn399x
[ 5.633763] Bluetooth: hci0: QCA Product ID :0x0000000a
[ 5.645350] Bluetooth: hci0: QCA SOC Version :0x40010224
[ 5.650906] Bluetooth: hci0: QCA ROM Version :0x00001001
[ 5.665173] Bluetooth: hci0: QCA Patch Version:0x00006699
[ 5.679356] Bluetooth: hci0: QCA controller version 0x02241001
[ 5.691109] Bluetooth: hci0: QCA Downloading qca/crbtfw21.tlv
[ 6.680102] Bluetooth: hci0: QCA Downloading qca/crnv21.bin
[ 6.842948] Bluetooth: hci0: QCA setup on UART is completed
Fixes: 523760b7ff88 ("Bluetooth: hci_qca: Added support for WCN3998")
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 879c001afbac3df94160334fe5117c0c83b2cf48 ]
A device_node reference obtained from the device tree is not released
on all error paths in the arm_scpi probe path. Specifically, a node
returned by of_parse_phandle() could be leaked when the probe failed
after the node was acquired. The probe function returns early and
the shmem reference is not released.
Use __free(device_node) scope-based cleanup to automatically release
the reference when the variable goes out of scope.
Fixes: ed7ecb883901 ("firmware: arm_scpi: Add compatibility checks for shmem node")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Message-Id: <20260121-arm_scpi_2-v2-1-702d7fa84acb@gmail.com>
Signed-off-by: Sudeep Holla <sudeep.holla@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a4e8473b775160f3ce978f621cf8dea2c7250433 ]
According to the FF-A specification (DEN0077, v1.1, §13.7), when
FFA_RXTX_UNMAP is invoked from any instance other than non-secure
physical, the w1 register must be zero (MBZ). If a non-zero value is
supplied in this context, the SPMC must return FFA_INVALID_PARAMETER.
The Arm FF-A driver operates exclusively as a guest or non-secure
physical instance where the partition ID is always zero and is not
invoked from a hypervisor context where w1 carries a VM ID. In this
execution model, the partition ID observed by the driver is always zero,
and passing a VM ID is unnecessary and potentially invalid.
Remove the vm_id parameter from ffa_rxtx_unmap() and ensure that the
SMC call is issued with w1 implicitly zeroed, as required by the
specification. This prevents invalid parameter errors and aligns the
implementation with the defined FF-A ABI behavior.
Fixes: 3bbfe9871005 ("firmware: arm_ffa: Add initial Arm FFA driver support")
Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com>
Message-Id: <20260304120953.847671-1-yeoreum.yun@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
qmc_qe_init_resources()
[ Upstream commit 3f4e403304186d79fddace860360540fc3af97f9 ]
Fix wrong variable used for error checking after devm_ioremap_resource()
call. The function checks qmc->scc_pram instead of qmc->dpram, which
could lead to incorrect error handling.
Fixes: eb680d563089 ("soc: fsl: cpm1: qmc: Add support for QUICC Engine (QE) implementation")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Acked-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/20260209015904.871269-1-nichen@iscas.ac.cn
Signed-off-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 014077044e874e270ec480515edbc1cadb976cf2 ]
When QMAN_FQ_FLAG_DYNAMIC_FQID is set, there's a race condition between
fq_table[fq->idx] state and freeing/allocating from the pool and
WARN_ON(fq_table[fq->idx]) in qman_create_fq() gets triggered.
Indeed, we can have:
Thread A Thread B
qman_destroy_fq() qman_create_fq()
qman_release_fqid()
qman_shutdown_fq()
gen_pool_free()
-- At this point, the fqid is available again --
qman_alloc_fqid()
-- so, we can get the just-freed fqid in thread B --
fq->fqid = fqid;
fq->idx = fqid * 2;
WARN_ON(fq_table[fq->idx]);
fq_table[fq->idx] = fq;
fq_table[fq->idx] = NULL;
And adding some logs between qman_release_fqid() and
fq_table[fq->idx] = NULL makes the WARN_ON() trigger a lot more.
To prevent that, ensure that fq_table[fq->idx] is set to NULL before
gen_pool_free() is called by using smp_wmb().
Fixes: c535e923bb97 ("soc/fsl: Introduce DPAA 1.x QMan device driver")
Signed-off-by: Richard Genoud <richard.genoud@bootlin.com>
Tested-by: CHAMPSEIX Thomas <thomas.champseix@alstomgroup.com>
Link: https://lore.kernel.org/r/20251223072549.397625-1-richard.genoud@bootlin.com
Signed-off-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 24ed11ee5bacf9a9aca18fc6b47667c7f38d578b ]
Fix the smatch checking:
drivers/soc/rockchip/grf.c:249 rockchip_grf_init()
warn: inconsistent refcounting 'np->kobj.kref.refcount.refs.counter':
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Fixes: 75fb63ae0312 ("soc: rockchip: grf: Support multiple grf to be handled")
Closes: https://lore.kernel.org/all/aYXvgTcUJWQL2can@stanley.mountain/
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Link: https://patch.msgid.link/1770814957-17762-1-git-send-email-shawn.lin@rock-chips.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0528a348b04b327a4611e29589beb4c9ae81304a ]
In ax45mp_cache_init(), of_find_matching_node() returns a device node
with an incremented reference count that must be released with
of_node_put(). The current code fails to call of_node_put() which
causes a reference leak.
Use the __free(device_node) attribute to ensure automatic cleanup when
the variable goes out of scope.
Fixes: d34599bcd2e4 ("cache: Add L2 cache management for Andes AX45MP RISC-V core")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3c85234b979af71cb9db5eb976ea08a468415767 ]
of_find_matching_node() returns a device_node with refcount incremented.
Use __free(device_node) attribute to automatically call of_node_put()
when the variable goes out of scope, preventing the refcount leak.
Fixes: cabff60ca77d ("cache: Add StarFive StarLink cache management")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5a741f8cc6fe62542f955cd8d24933a1b6589cbd ]
In mpfs_sys_controller_probe(), if of_get_mtd_device_by_node() fails,
the function returns immediately without freeing the allocated memory
for sys_controller, leading to a memory leak.
Fix this by jumping to the out_free label to ensure the memory is
properly freed.
Also, consolidate the error handling for the mbox_request_channel()
failure case to use the same label.
Fixes: 742aa6c563d2 ("soc: microchip: mpfs: enable access to the system controller's flash")
Co-developed-by: Jianhao Xu <jianhao.xu@seu.edu.cn>
Signed-off-by: Jianhao Xu <jianhao.xu@seu.edu.cn>
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e6d7eba23b666d85cacee0643be280d6ce1ebffc ]
Commit 4ab7bb976343 ("ata: libata-scsi: Refactor ata_scsiop_maint_in()")
modified ata_scsiop_maint_in() to directly call
ata_scsi_set_invalid_field() to set the field pointer of the sense data
of a failed MAINTENANCE IN command. However, in the case of an invalid
command format, the sense data field incorrectly indicates byte 1 of
the CDB. Fix this to indicate byte 2 of the command.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Fixes: 4ab7bb976343 ("ata: libata-scsi: Refactor ata_scsiop_maint_in()")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
