summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2017-10-17pinctrl: meson: rework pinmux opsJerome Brunet10-109/+194
This change prepare the introduction of new meson SoC. This new SoC will share the same gpio/pinconf registers but the pinmux part will be different. While the format of the data associated with each pinmux group will change, the way to handle pinmuxing will be similar. To deal with this new situation, the meson_pmx_struture is kept but the data associated to it is now generic. This allows to reuse the basic functions which would otherwise be copy/pasted in each pinmux driver (such as getting the name a count of groups and functions) Only the functions actually using this specific data is taken out of the common code and is handling the SoC pinmuxing Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-10-17pinctrl: meson: separate soc driversJerome Brunet9-79/+139
When meson pinctrl is enabled, all meson platforms pinctrl drivers are built in the kernel, with a significant amount of data. This leads to situation where pinctrl drivers targeting an architecture are also compiled and shipped on another one (ex: meson8 - ARM - compiled and shipped on ARM64 builds). This is a waste of memory we can easily avoid. This change makes 4 pinctrl drivers (1 per SoC) out the original single driver, allowing to compile and ship only the ones required. Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-10-14pinctrl: gemini: Add missing functionsLinus Walleij1-0/+10
Some two functions were missing from the Gemini pin control driver. Noticed when trying to use ethernet. Fix it up by adding them. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-10-12pinctrl: Do not depend in GPIOLIB, select itLinus Walleij2-3/+6
Instead of depends on GPIOLIB and having to run around in Kconfig menus looking for why your device is not available, simply select it from the pin control drivers that need it. The Kconfig for GPIOLIB is improved, selectable and this should "just work". Cc: Phil Reid <preid@electromag.com.au> Cc: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Cc: Peter Rosin <peda@axentia.se> Cc: Andrey Smirnov <andrew.smirnov@gmail.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-10-11pinctrl: qcom: spmi-gpio: Update GPIO EN_CTL when setting pin configFenglin Wu1-0/+5
GPIO is expected to be disabled iff PIN_CONFIG_BIAS_HIGH_IMPEDANCE is configured. Update is_enabled flag in config_set() so that it can reflect GPIO status correctly. Also modify EN_CTL register based on is_enabled flag in config_set() to configure the GPIO properly. Signed-off-by: Fenglin Wu <fenglinw@codeaurora.org> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-10-11pinctrl: mcp23s08: remove unused variables from pinconf_setPhil Reid1-4/+1
Variable mask and val are not used in the mcp_pinconf_set(). Signed-off-by: Phil Reid <preid@electromag.com.au> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-10-11pinctrl: change Kconfig PINCTRL variable to a menuconfigPhil Reid1-5/+4
This allows PINCTRL to be selected manually to allow enabling of the mcp23s08 i2c/spi gpio driver. Which is not platform specific. Signed-off-by: Phil Reid <preid@electromag.com.au> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-10-11pinctrl: meson: remove unused pin_baseJerome Brunet1-1/+0
While removing the need to have pin_base defined in meson pinctrl drivers, I forgot to remove the corresponding field from the pinctrl_data structure. Fixing this now. Fixes: 70e5ecb1b994 ("pinctrl: meson: get rid of pin_base") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-10-11pinctrl: meson-gx: add TEST_N i2s pinmuxJerome Brunet2-1/+10
Add TEST_N pinmux for channel 6 and 7 of the i2s output Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-10-10pinctrl: sx150x: make struct sx150x_regmap_config staticColin Ian King1-1/+1
The structure sx150x_regmap_config is local to the source and does not need to be in global scope, so make it static. Cleans up sparse warning: symbol 'sx150x_regmap_config' was not declared. Should it be static? Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-10-10pinctrl: ingenic: make function ingenic_pinctrl_probe staticColin Ian King1-1/+1
The function ingenic_pinctrl_probe is local to the source and does not need to be in global scope, so make it static. Cleans up sparse warnings symbol 'ingenic_pinctrl_probe' was not declared. Should it be static? Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-10-07Merge tag 'sh-pfc-for-v4.15-tag1' of ↵Linus Walleij3-0/+744
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel pinctrl: sh-pfc: Updates for v4.15 - Add SDHI and DRIF pin groups on R-Car H3 ES2.0, - Add USB3.0 host pin groups on R-Car H3 (ES1.x and ES2.0), - Add EthernetAVB and USB2.0 host pin groups on R-Car D3.
2017-10-07pinctrl: rockchip: rk3328: Fix the correct routing configDavid Wu1-2/+9
If the gmac-m1 optimization(bit10) is selected, the gpio function of gmac pins is not valid. We may use the rmii mode for gmac interface, the pins such as rx_d2, rx_d3, which the rgmii mode used, but rmii not used could be taken as gpio function. So gmac_rxd0m1 selects the bit2, and gmac_rxd0m3 select bit10 is more correct. Signed-off-by: David Wu <david.wu@rock-chips.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-10-07pinctrl: rockchip: Fix the rk3399 gpio0 and gpio1 banks' drv_offset at pmu grfDavid Wu1-6/+6
The offset of gpio0 and gpio1 bank drive strength is 0x8, not 0x4. But the mux is 0x4, we couldn't use the IOMUX_WIDTH_4BIT flag, so we give them actual offset. Signed-off-by: David Wu <david.wu@rock-chips.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-10-07Merge branch 'pinconf-rename' into develLinus Walleij16-63/+36
2017-10-07gpio: pxa: Use library functionsLinus Walleij1-12/+2
These request/free functions are just reimplementations of the standard helpers in gpiolib. Delete them and replace with the helpers. Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-10-07pinctrl: meson: Use library functionsLinus Walleij1-14/+2
These request/free functions are just reimplementations of the standard helpers in gpiolib. Delete them and replace with the helpers. Cc: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-10-07pinctrl: bcm: nsp: Use library functionsLinus Walleij1-19/+2
These request/free functions are just reimplementations of the standard helpers in gpiolib. Delete them and replace with the helpers. Acked-by: Scott Branden <scott.branden@broadcom.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-10-06pinctrl: meson-gxbb: add missing GPIOX_22 pinJerome Brunet1-0/+1
GPIOX_22 is declared as a gpio but the id is no present in the pin table. This hole trigger an error while reading the pingroup debugfs entry GPIOX_22 is no routed externally. For all we know, it could an internal pin of SoC Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-10-06pinctrl: meson-gx: TEST_N belongs to the AO controllerJerome Brunet2-8/+8
On meson-gx platforms, TEST_N has been incorrectly declared in the EE controller while it belongs to AO controller. Move the pin to the appropriate controller Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-10-06pinctrl: meson: get rid of pin_baseJerome Brunet5-25/+13
pin_base was used with the manually set pin offset in meson pinctrl. This is no longer the case, pin_base is 0 on every meson pinctrl controllers and should go away. Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-10-06pinctrl: meson: remove offset from pinctrlJerome Brunet6-1741/+1697
Offset on meson pinctrl and gpios is something that was carried from the vendor driver, where there is a weird link between the 2 controllers. Since these 2 controllers are independent, this offset adds an unnecessary complexity. This patch remove this manually set offset and rely on pinctrl to figure out the gpio base offset Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-10-02pinctrl: sh-pfc: r8a7795: Add USB3.0 host supportTakeshi Kihara1-0/+15
This patch adds USB3.0 ch0 pinmux support to R8A7795 SoC. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2017-10-02pinctrl: sh-pfc: r8a7795-es1: Add USB3.0 host supportTakeshi Kihara1-0/+29
This patch adds USB3{0,1} (USB3.0 host) pinmux support to R8A7795 ES1.x SoC. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2017-09-27pinctrl: cherryview fixed typo in commentChris Gorman1-1/+1
Fixed typo on comment for north_community. Signed-off-by: Chris Gorman <chrisjohgorman@gmail.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-09-22pinctrl/gpio: Unify namespace for cross-callsLinus Walleij17-38/+38
The pinctrl_request_gpio() and pinctrl_free_gpio() break the nice namespacing in the other cross-calls like pinctrl_gpio_foo(). Just rename them and all references so we have one namespace with all cross-calls under pinctrl_gpio_*(). Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-09-21pinctrl: meson: fix incorrect usage of ENOSYSJerome Brunet1-1/+1
ENOSYS is special and should only be used for incorrect syscall number. It is not the case here. let's use ENOTSUPP instead. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-09-21pinctrl: single: make two arrays static const, reduces object code sizeColin Ian King1-2/+2
Don't populate the read-only arrays prop2 and prop4 on the stack, instead make them static const. Makes the object code smaller by over 230 bytes: Before: text data bss dec hex filename 28235 5820 192 34247 85c7 drivers/pinctrl/pinctrl-single.o After: text data bss dec hex filename 27839 5980 192 34011 84db drivers/pinctrl/pinctrl-single.o Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-09-21pinctrl/amd: make functions amd_gpio_suspend and amd_gpio_resume staticColin Ian King1-2/+2
The functions amd_gpio_suspend and amd_gpio_resume are local to the source and do not need to be in global scope, so make them static. Cleans up sparse warnings: symbol 'amd_gpio_suspend' was not declared. Should it be static? symbol 'amd_gpio_resume' was not declared. Should it be static? Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Daniel Drake <drake@endlessm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-09-19pinctrl: sh-pfc: r8a77995: Add USB2.0 host supportTakeshi Kihara1-0/+15
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2017-09-19pinctrl: sh-pfc: r8a77995: Add EthernetAVB pins, groups and functionsYoshihiro Shimoda1-0/+119
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2017-09-19pinctrl: sh-pfc: r8a7795: Re-add DRIF supportDirk Behme1-0/+291
DRIF support for r8a7795 was initially added with commit 2d775831988 ("pinctrl: sh-pfc: r8a7795: Add DRIF support") and later dropped from the new pfc-r8a7795.c while re-naming the initial pfc-r8a7795.c to pfc-r8a7795-es1.c in commit b205914c8f8 ("pinctrl: sh-pfc: r8a7795: Add support for R-Car H3 ES2.0"). As the DRIF doesn't differ, re-add it here. Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2017-09-19pinctrl: sh-pfc: r8a7795: Add SDHI0-3 supportTakeshi Kihara1-0/+275
Add SDHI0-3 support for R-Car H3 ES2.0 based on a patch from the Renesas BSP. SDHI pin config is identical to H3 ES1.*. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2017-09-19pinctrl: uniphier: make arrays static, reduces object code sizeColin Ian King1-6/+8
Don't populate const arrays on the stack, instead make them static. Makes the object code smaller nearly 1000 bytes. Also line break wide lines to avoid checkpatch warnings. Before: text data bss dec hex filename 13112 1996 0 15108 3b04 pinctrl-uniphier-core.o After: text data bss dec hex filename 11642 2476 0 14118 3726 pinctrl-uniphier-core.o Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-09-16Merge tag 'upstream-4.14-rc1' of git://git.infradead.org/linux-ubifsLinus Torvalds4-16/+16
Pull UBI updates from Richard Weinberger: "Minor improvements" * tag 'upstream-4.14-rc1' of git://git.infradead.org/linux-ubifs: UBI: Fix two typos in comments ubi: fastmap: fix spelling mistake: "invalidiate" -> "invalidate" ubi: pr_err() strings should end with newlines ubi: pr_err() strings should end with newlines ubi: pr_err() strings should end with newlines
2017-09-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds23-116/+293
Pull networking fixes from David Miller: 1) Fix hotplug deadlock in hv_netvsc, from Stephen Hemminger. 2) Fix double-free in rmnet driver, from Dan Carpenter. 3) INET connection socket layer can double put request sockets, fix from Eric Dumazet. 4) Don't match collect metadata-mode tunnels if the device is down, from Haishuang Yan. 5) Do not perform TSO6/GSO on ipv6 packets with extensions headers in be2net driver, from Suresh Reddy. 6) Fix scaling error in gen_estimator, from Eric Dumazet. 7) Fix 64-bit statistics deadlock in systemport driver, from Florian Fainelli. 8) Fix use-after-free in sctp_sock_dump, from Xin Long. 9) Reject invalid BPF_END instructions in verifier, from Edward Cree. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (43 commits) mlxsw: spectrum_router: Only handle IPv4 and IPv6 events Documentation: link in networking docs tcp: fix data delivery rate bpf/verifier: reject BPF_ALU64|BPF_END sctp: do not mark sk dumped when inet_sctp_diag_fill returns err sctp: fix an use-after-free issue in sctp_sock_dump netvsc: increase default receive buffer size tcp: update skb->skb_mstamp more carefully net: ipv4: fix l3slave check for index returned in IP_PKTINFO net: smsc911x: Quieten netif during suspend net: systemport: Fix 64-bit stats deadlock net: vrf: avoid gcc-4.6 warning qed: remove unnecessary call to memset tg3: clean up redundant initialization of tnapi tls: make tls_sw_free_resources static sctp: potential read out of bounds in sctp_ulpevent_type_enabled() MAINTAINERS: review Renesas DT bindings as well net_sched: gen_estimator: fix scaling error in bytes/packets samples nfp: wait for the NSP resource to appear on boot nfp: wait for board state before talking to the NSP ...
2017-09-16Merge branch 'for-linus' of ↵Linus Torvalds11-11/+314
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull more input updates from Dmitry Torokhov: "A second round of updates for the input subsystem: - a new driver for PWM-controlled vibrators - ucb1400 touchscreen driver had completely busted suspend/resume handling - we now handle "home" button found on some devices with Goodix touchscreens - assorted other fixups" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: i8042 - add Gigabyte P57 to the keyboard reset table Input: xpad - validate USB endpoint type during probe Input: ucb1400_ts - fix suspend and resume handling Input: edt-ft5x06 - fix access to non-existing register Input: elantech - make arrays debounce_packet static, reduces object code size Input: surface3_spi - make const array header static, reduces object code size Input: goodix - add support for capacitive home button Input: add a driver for PWM controllable vibrators Input: adi - make array seq static, reduces object code size
2017-09-16firmware: Restore support for built-in firmwareMarkus Trippelsdorf1-4/+1
Commit 5620a0d1aac ("firmware: delete in-kernel firmware") removed the entire firmware directory. Unfortunately it thereby also removed the support for built-in firmware. This restores the ability to build firmware directly into the kernel by pruning the original Makefile to the necessary minimum. The default for EXTRA_FIRMWARE_DIR is now the standard directory /lib/firmware/. Fixes: 5620a0d1aac ("firmware: delete in-kernel firmware") Signed-off-by: Markus Trippelsdorf <markus@trippelsdorf.de> Acked-by: Greg K-H <gregkh@linuxfoundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-16mlxsw: spectrum_router: Only handle IPv4 and IPv6 eventsIdo Schimmel1-1/+2
The driver doesn't support events from address families other than IPv4 and IPv6, so ignore them. Otherwise, we risk queueing a work item before it's initialized. This can happen in case a VRF is configured when MROUTE_MULTIPLE_TABLES is enabled, as the VRF driver will try to add an l3mdev rule for the IPMR family. Fixes: 65e65ec137f4 ("mlxsw: spectrum_router: Don't ignore IPv6 notifications") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: Andreas Rammhold <andreas@rammhold.de> Reported-by: Florian Klink <flokli@flokli.de> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-16Merge branch '4.14-features' of ↵Linus Torvalds21-656/+1346
git://git.linux-mips.org/pub/scm/ralf/upstream-linus Pull MIPS updates from Ralf Baechle: "This is the main pull request for 4.14 for MIPS; below a summary of the non-merge commits: CM: - Rename mips_cm_base to mips_gcr_base - Specify register size when generating accessors - Use BIT/GENMASK for register fields, order & drop shifts - Add cluster & block args to mips_cm_lock_other() CPC: - Use common CPS accessor generation macros - Use BIT/GENMASK for register fields, order & drop shifts - Introduce register modify (set/clear/change) accessors - Use change_*, set_* & clear_* where appropriate - Add CM/CPC 3.5 register definitions - Use GlobalNumber macros rather than magic numbers - Have asm/mips-cps.h include CM & CPC headers - Cluster support for topology functions - Detect CPUs in secondary clusters CPS: - Read GIC_VL_IDENT directly, not via irqchip driver DMA: - Consolidate coherent and non-coherent dma_alloc code - Don't use dma_cache_sync to implement fd_cacheflush FPU emulation / FP assist code: - Another series of 14 commits fixing corner cases such as NaN propgagation and other special input values. - Zero bits 32-63 of the result for a CLASS.D instruction. - Enhanced statics via debugfs - Do not use bools for arithmetic. GCC 7.1 moans about this. - Correct user fault_addr type Generic MIPS: - Enhancement of stack backtraces - Cleanup from non-existing options - Handle non word sized instructions when examining frame - Fix detection and decoding of ADDIUSP instruction - Fix decoding of SWSP16 instruction - Refactor handling of stack pointer in get_frame_info - Remove unreachable code from force_fcr31_sig() - Convert to using %pOF instead of full_name - Remove the R6000 support. - Move FP code from *_switch.S to *_fpu.S - Remove unused ST_OFF from r2300_switch.S - Allow platform to specify multiple its.S files - Add #includes to various files to ensure code builds reliable and without warning.. - Remove __invalidate_kernel_vmap_range - Remove plat_timer_setup - Declare various variables & functions static - Abstract CPU core & VP(E) ID access through accessor functions - Store core & VP IDs in GlobalNumber-style variable - Unify checks for sibling CPUs - Add CPU cluster number accessors - Prevent direct use of generic_defconfig - Make CONFIG_MIPS_MT_SMP default y - Add __ioread64_copy - Remove unnecessary inclusions of linux/irqchip/mips-gic.h GIC: - Introduce asm/mips-gic.h with accessor functions - Use new GIC accessor functions in mips-gic-timer - Remove counter access functions from irq-mips-gic.c - Remove gic_read_local_vp_id() from irq-mips-gic.c - Simplify shared interrupt pending/mask reads in irq-mips-gic.c - Simplify gic_local_irq_domain_map() in irq-mips-gic.c - Drop gic_(re)set_mask() functions in irq-mips-gic.c - Remove gic_set_polarity(), gic_set_trigger(), gic_set_dual_edge(), gic_map_to_pin() and gic_map_to_vpe() from irq-mips-gic.c. - Convert remaining shared reg access, local int mask access and remaining local reg access to new accessors - Move GIC_LOCAL_INT_* to asm/mips-gic.h - Remove GIC_CPU_INT* macros from irq-mips-gic.c - Move various definitions to the driver - Remove gic_get_usm_range() - Remove __gic_irq_dispatch() forward declaration - Remove gic_init() - Use mips_gic_present() in place of gic_present and remove gic_present - Move gic_get_c0_*_int() to asm/mips-gic.h - Remove linux/irqchip/mips-gic.h - Inline __gic_init() - Inline gic_basic_init() - Make pcpu_masks a per-cpu variable - Use pcpu_masks to avoid reading GIC_SH_MASK* - Clean up mti, reserved-cpu-vectors handling - Use cpumask_first_and() in gic_set_affinity() - Let the core set struct irq_common_data affinity microMIPS: - Fix microMIPS stack unwinding on big endian systems MIPS-GIC: - SYNC after enabling GIC region NUMA: - Remove the unused parent_node() macro R6: - Constify r2_decoder_tables - Add accessor & bit definitions for GlobalNumber SMP: - Constify smp ops - Allow boot_secondary SMP op to return errors VDSO: - Drop gic_get_usm_range() usage - Avoid use of linux/irqchip/mips-gic.h Platform changes: Alchemy: - Add devboard machine type to cpuinfo - update cpu feature overrides - Threaded carddetect irqs for devboards AR7: - allow NULL clock for clk_get_rate BCM63xx: - Fix ENETDMA_6345_MAXBURST_REG offset - Allow NULL clock for clk_get_rate CI20: - Enable GPIO and RTC drivers in defconfig - Add ethernet and fixed-regulator nodes to DTS Generic platform: - Move Boston and NI 169445 FIT image source to their own files - Include asm/bootinfo.h for plat_fdt_relocated() - Include asm/time.h for get_c0_*_int() - Include asm/bootinfo.h for plat_fdt_relocated() - Include asm/time.h for get_c0_*_int() - Allow filtering enabled boards by requirements - Don't explicitly disable CONFIG_USB_SUPPORT - Bump default NR_CPUS to 16 JZ4700: - Probe the jz4740-rtc driver from devicetree Lantiq: - Drop check of boot select from the spi-falcon driver. - Drop check of boot select from the lantiq-flash MTD driver. - Access boot cause register in the watchdog driver through regmap - Add device tree binding documentation for the watchdog driver - Add docs for the RCU DT bindings. - Convert the fpi bus driver to a platform_driver - Remove ltq_reset_cause() and ltq_boot_select( - Switch to a proper reset driver - Switch to a new drivers/soc GPHY driver - Add an USB PHY driver for the Lantiq SoCs using the RCU module - Use of_platform_default_populate instead of __dt_register_buses - Enable MFD_SYSCON to be able to use it for the RCU MFD - Replace ltq_boot_select() with dummy implementation. Loongson 2F: - Allow NULL clock for clk_get_rate Malta: - Use new GIC accessor functions NI 169445: - Add support for NI 169445 board. - Only include in 32r2el kernels Octeon: - Add support for watchdog of 78XX SOCs. - Add support for watchdog of CN68XX SOCs. - Expose support for mips32r1, mips32r2 and mips64r1 - Enable more drivers in config file - Add support for accessing the boot vector. - Remove old boot vector code from watchdog driver - Define watchdog registers for 70xx, 73xx, 78xx, F75xx. - Make CSR functions node aware. - Allow access to CIU3 IRQ domains. - Misc cleanups in the watchdog driver Omega2+: - New board, add support and defconfig Pistachio: - Enable Root FS on NFS in defconfig Ralink: - Add Mediatek MT7628A SoC - Allow NULL clock for clk_get_rate - Explicitly request exclusive reset control in the pci-mt7620 PCI driver. SEAD3: - Only include in 32 bit kernels by default VoCore: - Add VoCore as a vendor t0 dt-bindings - Add defconfig file" * '4.14-features' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (167 commits) MIPS: Refactor handling of stack pointer in get_frame_info MIPS: Stacktrace: Fix microMIPS stack unwinding on big endian systems MIPS: microMIPS: Fix decoding of swsp16 instruction MIPS: microMIPS: Fix decoding of addiusp instruction MIPS: microMIPS: Fix detection of addiusp instruction MIPS: Handle non word sized instructions when examining frame MIPS: ralink: allow NULL clock for clk_get_rate MIPS: Loongson 2F: allow NULL clock for clk_get_rate MIPS: BCM63XX: allow NULL clock for clk_get_rate MIPS: AR7: allow NULL clock for clk_get_rate MIPS: BCM63XX: fix ENETDMA_6345_MAXBURST_REG offset mips: Save all registers when saving the frame MIPS: Add DWARF unwinding to assembly MIPS: Make SAVE_SOME more standard MIPS: Fix issues in backtraces MIPS: jz4780: DTS: Probe the jz4740-rtc driver from devicetree MIPS: Ci20: Enable RTC driver watchdog: octeon-wdt: Add support for 78XX SOCs. watchdog: octeon-wdt: Add support for cn68XX SOCs. watchdog: octeon-wdt: File cleaning. ...
2017-09-16Merge tag 'pci-v4.14-fixes-1' of ↵Linus Torvalds1-11/+2
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fix from Bjorn Helgaas: "Revert an attempt to fix a race while enabling upstream bridges because it broke iwlwifi firmware loading" * tag 'pci-v4.14-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: Revert "PCI: Avoid race while enabling upstream bridges"
2017-09-16Merge tag 'drm-fixes-for-v4.14-rc1' of ↵Linus Torvalds28-160/+236
git://people.freedesktop.org/~airlied/linux Pull drm AMD fixes from Dave Airlie: "Just had a single AMD fixes pull from Alex for rc1" * tag 'drm-fixes-for-v4.14-rc1' of git://people.freedesktop.org/~airlied/linux: drm/amdgpu: revert "fix deadlock of reservation between cs and gpu reset v2" drm/amdgpu: remove duplicate return statement drm/amdgpu: check memory allocation failure drm/amd/amdgpu: fix BANK_SELECT on Vega10 (v2) drm/amdgpu: inline amdgpu_ttm_do_bind again drm/amdgpu: fix amdgpu_ttm_bind drm/amdgpu: remove the GART copy hack drm/ttm:fix wrong decoding of bo_count drm/ttm: fix missing inc bo_count drm/amdgpu: set sched_hw_submission higher for KIQ (v3) drm/amdgpu: move default gart size setting into gmc modules drm/amdgpu: refine default gart size drm/amd/powerplay: ACG frequency added in PPTable drm/amdgpu: discard commands of killed processes drm/amdgpu: fix and cleanup shadow handling drm/amdgpu: add automatic per asic settings for gart_size drm/amdgpu/gfx8: fix spelling typo in mqd allocation drm/amd/powerplay: unhalt mec after loading drm/amdgpu/virtual_dce: Virtual display doesn't support disable vblank immediately drm/amdgpu: Fix huge page updates with CPU
2017-09-16Merge branch 'i2c/for-next' of ↵Linus Torvalds6-11/+1532
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull more i2c updates from Wolfram Sang: "I2C has two more new drivers: Altera FPGA and STM32F7" * 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: i2c-stm32f7: add driver i2c: i2c-stm32f4: use generic definition of speed enum dt-bindings: i2c-stm32: Document the STM32F7 I2C bindings i2c: altera: Add Altera I2C Controller driver dt-bindings: i2c: Add Altera I2C Controller
2017-09-16netvsc: increase default receive buffer sizeStephen Hemminger1-1/+1
The default receive buffer size was reduced by recent change to a value which was appropriate for 10G and Windows Server 2016. But the value is too small for full performance with 40G on Azure. Increase the default back to maximum supported by host. Fixes: 8b5327975ae1 ("netvsc: allow controlling send/recv buffer size") Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-16net: smsc911x: Quieten netif during suspendGeert Uytterhoeven1-1/+14
If the network interface is kept running during suspend, the net core may call net_device_ops.ndo_start_xmit() while the Ethernet device is still suspended, which may lead to a system crash. E.g. on sh73a0/kzm9g and r8a73a4/ape6evm, the external Ethernet chip is driven by a PM controlled clock. If the Ethernet registers are accessed while the clock is not running, the system will crash with an imprecise external abort. As this is a race condition with a small time window, it is not so easy to trigger at will. Using pm_test may increase your chances: # echo 0 > /sys/module/printk/parameters/console_suspend # echo platform > /sys/power/pm_test # echo mem > /sys/power/state To fix this, make sure the network interface is quietened during suspend. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-16net: systemport: Fix 64-bit stats deadlockFlorian Fainelli1-3/+0
We can enter a deadlock situation because there is no sufficient protection when ndo_get_stats64() runs in process context to guard against RX or TX NAPI contexts running in softirq, this can lead to the following lockdep splat and actual deadlock was experienced as well with an iperf session in the background and a while loop doing ifconfig + ethtool. [ 5.780350] ================================ [ 5.784679] WARNING: inconsistent lock state [ 5.789011] 4.13.0-rc7-02179-g32fae27c725d #70 Not tainted [ 5.794561] -------------------------------- [ 5.798890] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. [ 5.804971] swapper/0/0 [HC0[0]:SC1[1]:HE0:SE0] takes: [ 5.810175] (&syncp->seq#2){+.?...}, at: [<c0768a28>] bcm_sysport_tx_reclaim+0x30/0x54 [ 5.818327] {SOFTIRQ-ON-W} state was registered at: [ 5.823278] bcm_sysport_get_stats64+0x17c/0x258 [ 5.828053] dev_get_stats+0x38/0xac [ 5.831776] rtnl_fill_stats+0x30/0x118 [ 5.835761] rtnl_fill_ifinfo+0x538/0xe24 [ 5.839921] rtmsg_ifinfo_build_skb+0x6c/0xd8 [ 5.844430] rtmsg_ifinfo_event.part.5+0x14/0x44 [ 5.849201] rtmsg_ifinfo+0x20/0x28 [ 5.852837] register_netdevice+0x628/0x6b8 [ 5.857171] register_netdev+0x14/0x24 [ 5.861051] bcm_sysport_probe+0x30c/0x438 [ 5.865280] platform_drv_probe+0x50/0xb0 [ 5.869418] driver_probe_device+0x2e8/0x450 [ 5.873817] __driver_attach+0x104/0x120 [ 5.877871] bus_for_each_dev+0x7c/0xc0 [ 5.881834] bus_add_driver+0x1b0/0x270 [ 5.885797] driver_register+0x78/0xf4 [ 5.889675] do_one_initcall+0x54/0x190 [ 5.893646] kernel_init_freeable+0x144/0x1d0 [ 5.898135] kernel_init+0x8/0x110 [ 5.901665] ret_from_fork+0x14/0x2c [ 5.905363] irq event stamp: 24263 [ 5.908804] hardirqs last enabled at (24262): [<c08eecf0>] net_rx_action+0xc4/0x4e4 [ 5.916624] hardirqs last disabled at (24263): [<c0a7da00>] _raw_spin_lock_irqsave+0x1c/0x98 [ 5.925143] softirqs last enabled at (24258): [<c022a7fc>] irq_enter+0x84/0x98 [ 5.932524] softirqs last disabled at (24259): [<c022a918>] irq_exit+0x108/0x16c [ 5.939985] [ 5.939985] other info that might help us debug this: [ 5.946576] Possible unsafe locking scenario: [ 5.946576] [ 5.952556] CPU0 [ 5.955031] ---- [ 5.957506] lock(&syncp->seq#2); [ 5.960955] <Interrupt> [ 5.963604] lock(&syncp->seq#2); [ 5.967227] [ 5.967227] *** DEADLOCK *** [ 5.967227] [ 5.973222] 1 lock held by swapper/0/0: [ 5.977092] #0: (&(&ring->lock)->rlock){..-...}, at: [<c0768a18>] bcm_sysport_tx_reclaim+0x20/0x54 So just remove the u64_stats_update_begin()/end() pair in ndo_get_stats64() since it does not appear to be useful for anything. No inconsistency was observed with either ifconfig or ethtool, global TX counts equal the sum of per-queue TX counts on a 32-bit architecture. Fixes: 10377ba7673d ("net: systemport: Support 64bit statistics") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-16net: vrf: avoid gcc-4.6 warningArnd Bergmann1-3/+3
When building an allmodconfig kernel with gcc-4.6, we get a rather odd warning: drivers/net/vrf.c: In function ‘vrf_ip6_input_dst’: drivers/net/vrf.c:964:3: error: initialized field with side-effects overwritten [-Werror] drivers/net/vrf.c:964:3: error: (near initialization for ‘fl6’) [-Werror] I have no idea what this warning is even trying to say, but it does seem like a false positive. Reordering the initialization in to match the structure definition gets rid of the warning, and might also avoid whatever gcc thinks is wrong here. Fixes: 9ff74384600a ("net: vrf: Handle ipv6 multicast and link-local addresses") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-16qed: remove unnecessary call to memsetHimanshu Jha1-1/+0
call to memset to assign 0 value immediately after allocating memory with kzalloc is unnecesaary as kzalloc allocates the memory filled with 0 value. Semantic patch used to resolve this issue: @@ expression e,e2; constant c; statement S; @@ e = kzalloc(e2, c); if(e == NULL) S - memset(e, 0, e2); Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com> Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com> Acked-by: Sudarsana Kalluru <sudarsana.kalluru@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-15Merge branch 'next' into for-linusDmitry Torokhov11-11/+314
Prepare second round of input updates for 4.14 merge window.
2017-09-15Input: i8042 - add Gigabyte P57 to the keyboard reset tableKai-Heng Feng1-0/+7
Similar to other Gigabyte laptops, the touchpad on P57 requires a keyboard reset to detect Elantech touchpad correctly. BugLink: https://bugs.launchpad.net/bugs/1594214 Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-31 11:08:07 +0300