| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Remove unneeded stray semicolon.
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202305152341.oiSjRpv6-lkp@intel.com/
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230515184408.9421-1-francesco@dolcini.it
|
|
There is no need to exclusively set the .owner member of the struct
device_driver when defining the platform_driver struct. The Linux core
takes care of setting the .owner member as part of the call to
module_platform_driver() helper function.
Issue identified using the platform_no_drv_owner.cocci Coccinelle
semantic patch as:
drivers/gpu/drm/bridge/samsung-dsim.c:1957:6-11: No need to set .owner here.
The core will do it.
No functional changes are intended.
Signed-off-by: Anup Sharma <anupnewsmail@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/ZF9igb/nvL6GRBsq@yoga
|
|
Currently, the pixel conversion isn't rounding the fixed-point values
before assigning it to the RGB coefficients, which is causing the IGT
pixel-format tests to fail. So, use the drm_fixp2int_round() fixed-point
helper to round the values when assigning it to the RGB coefficients.
Tested with igt@kms_plane@pixel-format and igt@kms_plane@pixel-format-source-clamping.
[v2]:
* Use drm_fixp2int_round() to fix the pixel conversion instead of
casting the values to s32 (Melissa Wen).
Fixes: 89b03aeaef16 ("drm/vkms: fix 32bit compilation error by replacing macros")
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Arthur Grillo <arthurgrillo@riseup.net>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20230512104044.65034-2-mcanal@igalia.com
|
|
For "boe,tv105wum-nw0" this special panel, it is stipulated in
the panel spec that MIPI needs to keep the LP11 state before
the lcm_reset pin is pulled high.
Signed-off-by: Shuijing Li <shuijing.li@mediatek.com>
Signed-off-by: Xinlei Lee <xinlei.lee@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230515094955.15982-3-shuijing.li@mediatek.com
|
|
Reduce the delay after LCM reset by removing an extra delay in the
initialization commands array. The required delay of at least 6ms after
reset is guaranteed by boe_panel_prepare().
Signed-off-by: Shuijing Li <shuijing.li@mediatek.com>
Signed-off-by: Xinlei Lee <xinlei.lee@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230515094955.15982-2-shuijing.li@mediatek.com
|
|
This is a leftover from an early iteration of the driver when it was still
named ssd1307 instead of ssd130x. Change it for consistency with the rest.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn>
Link: https://patchwork.freedesktop.org/patch/msgid/20230512120232.304603-1-javierm@redhat.com
|
|
Consider a configuration like this:
1, efifb (or simpledrm) is built-in;
2, a native display driver (such as radeon) is also built-in.
As Javier said, this is not a common configuration (the native display
driver is usually built as a module), but it can happen and cause some
trouble.
In this case, since efifb, radeon and sysfb are all in device_initcall()
level, the order in practise is like this:
efifb registered at first, but no "efi-framebuffer" device yet. radeon
registered later, and /dev/fb0 created. sysfb_init() comes at last, it
registers "efi-framebuffer" and then causes an error message "efifb: a
framebuffer is already registered". Make sysfb_init() to be subsys_
initcall_sync() can avoid this. And Javier Martinez Canillas is trying
to make a more general solution in commit 873eb3b11860 ("fbdev: Disable
sysfb device registration when removing conflicting FBs").
However, this patch still makes sense because it can make the screen
display as early as possible (We cannot move to subsys_initcall, since
sysfb_init() should be executed after PCI enumeration).
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220704011704.1418055-1-chenhuacai@loongson.cn
|
|
Add BOE EV121WXM-N10-1850 12.1" WXGA (1280x800) TFT LCD panel support.
The panel has a LVDS display interface.
The panel's product specification can be found at:
http://www.onetech.com.tw/files/EV121WXM-N10-1850ProductSpecification_20180801.pdf
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230508083826.1016206-3-victor.liu@nxp.com
|
|
Drop sharp_nt_panel_disable() and sharp_nt_panel_enable(), which bear no
useful code. Also drop sharp_nt_panel::enable and sharp_nt_panel::mode
fields which also provide no use now.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230507172639.2320934-2-dmitry.baryshkov@linaro.org
|
|
Using current settings causes panel flickering on APQ8074 dragonboard.
Adjust panel settings to follow the vendor-provided mode. This also
enables MIPI_DSI_MODE_VIDEO_SYNC_PULSE, which is also specified by the
vendor dtsi for the mentioned dragonboard.
Fixes: ee0172383190 ("drm/panel: Add Sharp LS043T1LE01 MIPI DSI panel")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230507172639.2320934-1-dmitry.baryshkov@linaro.org
|
|
Smatch reports:
drivers/gpu/drm/sun4i/sun4i_tcon.c:805 sun4i_tcon_init_clocks() warn:
'tcon->clk' from clk_prepare_enable() not released on lines: 792,801.
In the function sun4i_tcon_init_clocks(), tcon->clk and tcon->sclk0 are
not disabled in the error handling, which affects the release of
these variable. Although sun4i_tcon_bind(), which calls
sun4i_tcon_init_clocks(), use sun4i_tcon_free_clocks to disable the
variables mentioned, but the error handling branch of
sun4i_tcon_init_clocks() ignores the required disable process.
To fix this issue, use the devm_clk_get_enabled to automatically
balance enable and disabled calls. As original implementation use
sun4i_tcon_free_clocks() to disable clk explicitly, we delete the
related calls and error handling that are no longer needed.
Fixes: 9026e0d122ac ("drm: Add Allwinner A10 Display Engine support")
Fixes: b14e945bda8a ("drm/sun4i: tcon: Prepare and enable TCON channel 0 clock at init")
Fixes: 8e9240472522 ("drm/sun4i: support TCONs without channel 1")
Fixes: 34d698f6e349 ("drm/sun4i: Add has_channel_0 TCON quirk")
Signed-off-by: XuDong Liu <m202071377@hust.edu.cn>
Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20230430112347.4689-1-m202071377@hust.edu.cn
|
|
In DSI mode, TCON0's data clock is required to run at 1/4 the per-lane
bit rate.
Signed-off-by: Roman Beranek <me@crly.cz>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20230505052110.67514-5-me@crly.cz
|
|
While the rate of TCON0's DCLK matches dotclock for parallel and LVDS
outputs, this doesn't hold for DSI. The 'D' in DCLK actually stands for
'Data' according to Allwinner's manuals. The clock is mostly referred to
as dclk throughout this driver already anyway, so stick with that.
Signed-off-by: Roman Beranek <me@crly.cz>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20230505052110.67514-4-me@crly.cz
|
|
Start the 6.5 release cycle.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
|
added documentation to drm_dev_unregister clarifying that devres managed
devices allocated with devm_drm_dev_alloc do not require calls to
drm_dev_put.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Brandon Pollack <brpol@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230425080240.3582324-1-brpol@chromium.org
|
|
Implement DRM fbdev helpers for reading and writing framebuffer
memory with the respective fbdev functions. Removes duplicate
code.
v2:
* rename fb_cfb_() to fb_io_() (Geert)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Sui Jingfeng <suijingfeng@loongson.cn>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Helge Deller <deller@gmx.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230428122452.4856-20-tzimmermann@suse.de
|
|
Move the existing I/O read and write code for I/O memory into
the new helpers fb_cfb_read() and fb_cfb_write(). Make them the
default fp_ops. No functional changes.
In the near term, the new functions will be useful to the DRM
subsystem, which currently provides it's own implementation. It
can then use the shared code. In the longer term, it might make
sense to revise the I/O helper's default status and make them
opt-in by the driver. Systems that don't use them would not
contain the code any longer.
v2:
* add detailed commit message (Javier)
* rename fb_cfb_() to fb_io_() (Geert)
* add fixes that got lost while moving the code (Geert)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Sui Jingfeng <suijingfeng@loongson.cn>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Helge Deller <deller@gmx.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230428122452.4856-19-tzimmermann@suse.de
|
|
Push the test for info->screen_base from fb_read() and fb_write() into
the implementations of struct fb_ops.{fb_read,fb_write}. In cases where
the driver operates on info->screen_buffer, test this field instead.
While bothi fields, screen_base and screen_buffer, are stored in the
same location, they refer to different address spaces. For correctness,
we want to test each field in exactly the code that uses it.
v2:
* also test screen_base in pvr2fb (Geert)
* also test screen_buffer in ivtvfb, arcfb, broadsheetfb,
hecubafb, metronomefb and ssd1307fb (Geert)
* give a rational for the change (Geert)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Sui Jingfeng <suijingfeng@loongson.cn>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230428122452.4856-18-tzimmermann@suse.de
|
|
The file-op entry points fb_read() and fb_write() verify that
info->state has been set to FBINFO_STATE_RUNNING. Remove the same
test from the implementations of struct fb_ops.{fb_read,fb_write}.
v2:
* also remove test from ivtvfb, braodsheetfb, hecubafb and
metronomefb (Geert)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Sui Jingfeng <suijingfeng@loongson.cn>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230428122452.4856-17-tzimmermann@suse.de
|
|
Use info->screen_buffer when reading and writing framebuffers in
system memory. It's the correct pointer for this address space.
The struct fb_info has a union to store the framebuffer memory. This can
either be info->screen_base if the framebuffer is stored in I/O memory,
or info->screen_buffer if the framebuffer is stored in system memory.
Since the fb_sys_{read,write}() functions operate on the latter address
space, it is wrong to use .screen_base and .screen_buffer must be used
instead. This also gets rid of all the casting needed due to not using
the correct data type.
v2:
* add detailed commit message (Javier)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Sui Jingfeng <suijingfeng@loongson.cn>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230428122452.4856-16-tzimmermann@suse.de
|
|
Always return the number of bytes read or written within the
framebuffer. Only return an errno code if framebuffer memory
was not touched. This is the semantics required by POSIX and
makes fb_read() and fb_write() compatible with IGT tests. [1]
This bug has been fixed for fb_write() long ago by
commit 6a2a88668e90 ("[PATCH] fbdev: Fix return error of
fb_write"). The code in fb_read() and the corresponding fb_sys_()
helpers was forgotten.
It can happen that copy_{from, to}_user() only partially copies
the given buffer. Take this into account when calculating the
number of bytes.
v2:
* consider return value from copy_{from,to}_user() (Geert)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Sui Jingfeng <suijingfeng@loongson.cn>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://gitlab.freedesktop.org/drm/igt-gpu-tools/-/blob/master/tests/fbdev.c # 1
Link: https://patchwork.freedesktop.org/patch/msgid/20230428122452.4856-15-tzimmermann@suse.de
|
|
Use info->screen_buffer when reading and writing framebuffers in
system memory. It's the correct pointer for this address space.
The struct fb_info has a union to store the framebuffer memory. This can
either be info->screen_base if the framebuffer is stored in I/O memory,
or info->screen_buffer if the framebuffer is stored in system memory.
As the driver operates on the latter address space, it is wrong to use
.screen_base and .screen_buffer must be used instead.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230428122452.4856-14-tzimmermann@suse.de
|
|
Use info->screen_buffer when reading and writing framebuffers in
system memory. It's the correct pointer for this address space.
The struct fb_info has a union to store the framebuffer memory. This can
either be info->screen_base if the framebuffer is stored in I/O memory,
or info->screen_buffer if the framebuffer is stored in system memory.
As the driver operates on the latter address space, it is wrong to use
.screen_base and .screen_buffer must be used instead. This also gets
rid of casting needed due to not using the correct data type.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230428122452.4856-13-tzimmermann@suse.de
|
|
Use info->screen_buffer when reading and writing framebuffers in
system memory. It's the correct pointer for this address space.
The struct fb_info has a union to store the framebuffer memory. This can
either be info->screen_base if the framebuffer is stored in I/O memory,
or info->screen_buffer if the framebuffer is stored in system memory.
As the driver operates on the latter address space, it is wrong to use
.screen_base and .screen_buffer must be used instead. This also gets
rid of casting needed due to not using the correct data type.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230428122452.4856-12-tzimmermann@suse.de
|
|
Use info->screen_buffer when reading and writing framebuffers in
system memory. It's the correct pointer for this address space.
The struct fb_info has a union to store the framebuffer memory. This can
either be info->screen_base if the framebuffer is stored in I/O memory,
or info->screen_buffer if the framebuffer is stored in system memory.
As the driver operates on the latter address space, it is wrong to use
.screen_base and .screen_buffer must be used instead.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230428122452.4856-11-tzimmermann@suse.de
|
|
Use info->screen_buffer when reading and writing framebuffers in
system memory. It's the correct pointer for this address space.
The struct fb_info has a union to store the framebuffer memory. This can
either be info->screen_base if the framebuffer is stored in I/O memory,
or info->screen_buffer if the framebuffer is stored in system memory.
As the driver operates on the latter address space, it is wrong to use
.screen_base and .screen_buffer must be used instead. This also gets
rid of casting needed due to not using the correct data type.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230428122452.4856-10-tzimmermann@suse.de
|
|
Use info->screen_buffer when reading and writing framebuffers in
system memory. It's the correct pointer for this address space.
The struct fb_info has a union to store the framebuffer memory. This can
either be info->screen_base if the framebuffer is stored in I/O memory,
or info->screen_buffer if the framebuffer is stored in system memory.
As the driver operates on the latter address space, it is wrong to use
.screen_base and .screen_buffer must be used instead. This also gets
rid of casting needed due to not using the correct data type.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230428122452.4856-9-tzimmermann@suse.de
|
|
Use info->screen_buffer when reading and writing framebuffers in
system memory. It's the correct pointer for this address space.
The struct fb_info has a union to store the framebuffer memory. This can
either be info->screen_base if the framebuffer is stored in I/O memory,
or info->screen_buffer if the framebuffer is stored in system memory.
As the driver operates on the latter address space, it is wrong to use
.screen_base and .screen_buffer must be used instead. This also gets
rid of casting needed due to not using the correct data type.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230428122452.4856-8-tzimmermann@suse.de
|
|
Use info->screen_buffer when reading and writing framebuffers in
system memory. It's the correct pointer for this address space.
The struct fb_info has a union to store the framebuffer memory. This can
either be info->screen_base if the framebuffer is stored in I/O memory,
or info->screen_buffer if the framebuffer is stored in system memory.
As the driver operates on the latter address space, it is wrong to use
.screen_base and .screen_buffer must be used instead. This also gets
rid of casting needed due to not using the correct data type.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230428122452.4856-7-tzimmermann@suse.de
|
|
Use info->screen_buffer when reading and writing framebuffers in
system memory. It's the correct pointer for this address space.
The struct fb_info has a union to store the framebuffer memory. This can
either be info->screen_base if the framebuffer is stored in I/O memory,
or info->screen_buffer if the framebuffer is stored in system memory.
As the driver operates on the latter address space, it is wrong to use
.screen_base and .screen_buffer must be used instead. This also gets
rid of casting needed due to not using the correct data type.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230428122452.4856-6-tzimmermann@suse.de
|
|
Use info->screen_buffer when reading and writing framebuffers in
system memory. It's the correct pointer for this address space.
The struct fb_info has a union to store the framebuffer memory. This can
either be info->screen_base if the framebuffer is stored in I/O memory,
or info->screen_buffer if the framebuffer is stored in system memory.
As the driver operates on the latter address space, it is wrong to use
.screen_base and .screen_buffer must be used instead. This also gets
rid of casting needed due to not using the correct data type.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230428122452.4856-5-tzimmermann@suse.de
|
|
Use info->screen_buffer when reading and writing framebuffers in
system memory. It's the correct pointer for this address space.
The struct fb_info has a union to store the framebuffer memory. This can
either be info->screen_base if the framebuffer is stored in I/O memory,
or info->screen_buffer if the framebuffer is stored in system memory.
As the driver operates on the latter address space, it is wrong to use
.screen_base and .screen_buffer must be used instead. This also gets
rid of casting needed due to not using the correct data type.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230428122452.4856-4-tzimmermann@suse.de
|
|
Use info->screen_buffer when reading and writing framebuffers in
system memory. It's the correct pointer for this address space.
The struct fb_info has a union to store the framebuffer memory. This can
either be info->screen_base if the framebuffer is stored in I/O memory,
or info->screen_buffer if the framebuffer is stored in system memory.
As the driver operates on the latter address space, it is wrong to use
.screen_base and .screen_buffer must be used instead. This also gets
rid of casting needed due to not using the correct data type.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230428122452.4856-3-tzimmermann@suse.de
|
|
Use info->screen_buffer when reading and writing framebuffers in
system memory. It's the correct pointer for this address space.
The struct fb_info has a union to store the framebuffer memory. This can
either be info->screen_base if the framebuffer is stored in I/O memory,
or info->screen_buffer if the framebuffer is stored in system memory.
As the driver operates on the latter address space, it is wrong to use
.screen_base and .screen_buffer must be used instead. This also gets
rid of casting needed due to not using the correct data type.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230428122452.4856-2-tzimmermann@suse.de
|
|
Currently, vkms supports the rotate-90, rotate-180, reflect-x and
reflect-y properties. Therefore, improve the vkms IGT test coverage by
adding the rotate-270 property to vkms. The rotation was implement by
software: rotate the way the blending occurs by making the source x axis
be the destination y axis and the source y axis be the destination x
axis and reverse-read the axis.
Now, vkms supports all possible rotation values.
Tested with igt@kms_rotation_crc@primary-rotation-270 [1],
and igt@kms_rotation_crc@sprite-rotation-270 [1].
[1] https://patchwork.freedesktop.org/series/116025/
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20230418130525.128733-6-mcanal@igalia.com
|
|
Currently, vkms only supports the rotate-180, reflect-x and reflect-y
properties. Therefore, improve the vkms IGT test coverage by adding the
rotate-90 property to vkms. The rotation was implement by software: rotate
the way the blending occurs by making the source x axis be the destination
y axis and the source y axis be the destination x axis.
Tested with igt@kms_rotation_crc@primary-rotation-90 [1],
igt@kms_rotation_crc@sprite-rotation-90 [1], and
igt@kms_rotation_crc@sprite-rotation-90-pos-100-0 [1].
[1] https://patchwork.freedesktop.org/series/116025/
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20230418130525.128733-5-mcanal@igalia.com
|
|
Currently, vkms only supports the reflect-x property. Therefore, add the
reflect-y property to vkms through a software implementation of the
operation. This is possible by reverse reading the y axis during the
blending.
Note that, by implementing the reflect-x and reflect-y properties, it is
also possible to add the rotate-180 property, as it is a combination
of those two properties.
Tested with igt@kms_rotation_crc@primary-reflect-y [1],
igt@kms_rotation_crc@sprite-reflect-y [1],
igt@kms_rotation_crc@primary-rotation-180,
igt@kms_rotation_crc@sprite-rotation-180,
and igt@kms_rotation_crc@cursor-rotation-180.
[1] https://patchwork.freedesktop.org/series/116025/
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20230418130525.128733-4-mcanal@igalia.com
|
|
Currently, vkms doesn't support any reflection property. Therefore, add
the reflect-x property to vkms through a software implementation of the
operation. This is possible by reverse reading the x axis during the
blending.
Tested with igt@kms_rotation_crc@primary-reflect-x [1] and
igt@kms_rotation_crc@sprite-reflect-x [1].
[1] https://patchwork.freedesktop.org/series/116025/
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20230418130525.128733-3-mcanal@igalia.com
|
|
Refer to drmm_vram_helper_init() instead of the non-existent
drmm_vram_helper_alloc_mm().
Fixes: a5f23a72355d ("drm/vram-helper: Managed vram helpers")
Signed-off-by: Luc Ma <luc@sietium.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/64583db2.630a0220.eb75d.8f51@mx.google.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
- A long-standing bug in crypto_engine
- A buggy but harmless check in the sun8i-ss driver
- A regression in the CRYPTO_USER interface
* tag 'v6.4-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: api - Fix CRYPTO_USER checks for report function
crypto: engine - fix crypto_queue backlog handling
crypto: sun8i-ss - Fix a test in sun8i_ss_setup_ivs()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"A couple more patches that would be good to get into -rc1:
- Revert an i.MX patch that's causing video failures because division
math goes sideways
- Fix a clang + W=1 build isue where FIELD_PREP() is taking a 32-bit
variable instead of the usual u64 type
- Fix a Kconfig bug in the StarFive JH7110 clk config that selects a
reset controller when it can't be selected"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: starfive: Fix RESET_STARFIVE_JH7110 can't be selected in a specified case
clk: sp7021: Adjust width of _m in HWM_FIELD_PREP()
Revert "clk: imx: composite-8m: Add support to determine_rate"
|
|
git://git.linaro.org/landing-teams/working/fujitsu/integration
Pull mailbox updates from Jassi Brar:
- mailbox api: allow direct registration to a channel and convert omap
and pcc to use mbox_bind_client
- omap and hi6220 : use of_property_read_bool
- test: fix double-free and use spinlock header
- rockchip and bcm-pdc: drop of_match_ptr
- mpfs: change config symbol
- mediatek gce: support MT6795
- qcom apcs: consolidate of_device_id and support IPQ9574
* tag 'mailbox-v6.4' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
dt-bindings: mailbox: qcom: add compatible for IPQ9574 SoC
mailbox: qcom-apcs-ipc: do not grow the of_device_id
dt-bindings: mailbox: qcom,apcs-kpss-global: use fallbacks for few variants
dt-bindings: mailbox: mediatek,gce-mailbox: Add support for MT6795
mailbox: mpfs: convert SOC_MICROCHIP_POLARFIRE to ARCH_MICROCHIP_POLARFIRE
mailbox: bcm-pdc: drop of_match_ptr for ID table
mailbox: rockchip: drop of_match_ptr for ID table
mailbox: mailbox-test: Fix potential double-free in mbox_test_message_write()
mailbox: mailbox-test: Explicitly include header for spinlock support
mailbox: Use of_property_read_bool() for boolean properties
mailbox: pcc: Use mbox_bind_client
mailbox: omap: Use mbox_bind_client
mailbox: Allow direct registration to a channel
|
|
Pull more io_uring updates from Jens Axboe:
"Nothing major in here, just two different parts:
- A small series from Breno that enables passing the full SQE down
for ->uring_cmd().
This is a prerequisite for enabling full network socket operations.
Queued up a bit late because of some stylistic concerns that got
resolved, would be nice to have this in 6.4-rc1 so the dependent
work will be easier to handle for 6.5.
- Fix for the huge page coalescing, which was a regression introduced
in the 6.3 kernel release (Tobias)"
* tag 'for-6.4/io_uring-2023-05-07' of git://git.kernel.dk/linux:
io_uring: Remove unnecessary BUILD_BUG_ON
io_uring: Pass whole sqe to commands
io_uring: Create a helper to return the SQE size
io_uring/rsrc: check for nonconsecutive pages
|
|
Pull more SCSI updates from James Bottomley:
"Six late arriving patches for the merge window. Five are minor
assorted fixes and updates.
The IPR driver change removes SATA support, which will now allow a
major cleanup in the ATA subsystem because it was the only driver
still using the old attachment mechanism. The driver is only used on
power systems and SATA was used to support a DVD device, which has
long been moved to a different hba. IBM chose this route instead of
porting ipr to the newer SATA interfaces"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: qedi: Fix use after free bug in qedi_remove()
scsi: ufs: core: mcq: Fix &hwq->cq_lock deadlock issue
scsi: ipr: Remove several unused variables
scsi: pm80xx: Log device registration
scsi: ipr: Remove SATA support
scsi: scsi_debug: Abort commands from scsi_debug_device_reset()
|
|
Pull more block updates from Jens Axboe:
- MD pull request via Song:
- Improve raid5 sequential IO performance on spinning disks, which
fixes a regression since v6.0 (Jan Kara)
- Fix bitmap offset types, which fixes an issue introduced in this
merge window (Jonathan Derrick)
- Cleanup of hweight type used for cgroup writeback (Maxim)
- Fix a regression with the "has_submit_bio" changes across partitions
(Ming)
- Cleanup of QUEUE_FLAG_ADD_RANDOM clearing.
We used to set this flag on queues non blk-mq queues, and hence some
drivers clear it unconditionally. Since all of these have since been
converted to true blk-mq drivers, drop the useless clear as the bit
is not set (Chaitanya)
- Fix the flags being set in a bio for a flush for drbd (Christoph)
- Cleanup and deduplication of the code handling setting block device
capacity (Damien)
- Fix for ublk handling IO timeouts (Ming)
- Fix for a regression in blk-cgroup teardown (Tao)
- NBD documentation and code fixes (Eric)
- Convert blk-integrity to using device_attributes rather than a second
kobject to manage lifetimes (Thomas)
* tag 'for-6.4/block-2023-05-06' of git://git.kernel.dk/linux:
ublk: add timeout handler
drbd: correctly submit flush bio on barrier
mailmap: add mailmap entries for Jens Axboe
block: Skip destroyed blkg when restart in blkg_destroy_all()
writeback: fix call of incorrect macro
md: Fix bitmap offset type in sb writer
md/raid5: Improve performance for sequential IO
docs nbd: userspace NBD now favors github over sourceforge
block nbd: use req.cookie instead of req.handle
uapi nbd: add cookie alias to handle
uapi nbd: improve doc links to userspace spec
blk-integrity: register sysfs attributes on struct device
blk-integrity: convert to struct device_attribute
blk-integrity: use sysfs_emit
block/drivers: remove dead clear of random flag
block: sync part's ->bd_has_submit_bio with disk's
block: Cleanup set_capacity()/bdev_set_nr_sectors()
|
|
Do not generate the HS front and back porch gaps, the HSA gap and
EOT packet, as these packets are not required. This makes the bridge
work with Samsung DSIM on i.MX8MM and i.MX8MP.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230403221233.500485-2-marex@denx.de
|
|
Do not generate the HS front and back porch gaps, the HSA gap and
EOT packet, as these packets are not required. This makes the bridge
work with Samsung DSIM on i.MX8MM and i.MX8MP.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230403221233.500485-1-marex@denx.de
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter.
Current release - regressions:
- sched: act_pedit: free pedit keys on bail from offset check
Current release - new code bugs:
- pds_core:
- Kconfig fixes (DEBUGFS and AUXILIARY_BUS)
- fix mutex double unlock in error path
Previous releases - regressions:
- sched: cls_api: remove block_cb from driver_list before freeing
- nf_tables: fix ct untracked match breakage
- eth: mtk_eth_soc: drop generic vlan rx offload
- sched: flower: fix error handler on replace
Previous releases - always broken:
- tcp: fix skb_copy_ubufs() vs BIG TCP
- ipv6: fix skb hash for some RST packets
- af_packet: don't send zero-byte data in packet_sendmsg_spkt()
- rxrpc: timeout handling fixes after moving client call connection
to the I/O thread
- ixgbe: fix panic during XDP_TX with > 64 CPUs
- igc: RMW the SRRCTL register to prevent losing timestamp config
- dsa: mt7530: fix corrupt frames using TRGMII on 40 MHz XTAL MT7621
- r8152:
- fix flow control issue of RTL8156A
- fix the poor throughput for 2.5G devices
- move setting r8153b_rx_agg_chg_indicate() to fix coalescing
- enable autosuspend
- ncsi: clear Tx enable mode when handling a Config required AEN
- octeontx2-pf: macsec: fixes for CN10KB ASIC rev
Misc:
- 9p: remove INET dependency"
* tag 'net-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (69 commits)
net: bcmgenet: Remove phy_stop() from bcmgenet_netif_stop()
pds_core: fix mutex double unlock in error path
net/sched: flower: fix error handler on replace
Revert "net/sched: flower: Fix wrong handle assignment during filter change"
net/sched: flower: fix filter idr initialization
net: fec: correct the counting of XDP sent frames
bonding: add xdp_features support
net: enetc: check the index of the SFI rather than the handle
sfc: Add back mailing list
virtio_net: suppress cpu stall when free_unused_bufs
ice: block LAN in case of VF to VF offload
net: dsa: mt7530: fix network connectivity with multiple CPU ports
net: dsa: mt7530: fix corrupt frames using trgmii on 40 MHz XTAL MT7621
9p: Remove INET dependency
netfilter: nf_tables: fix ct untracked match breakage
af_packet: Don't send zero-byte data in packet_sendmsg_spkt().
igc: read before write to SRRCTL register
pds_core: add AUXILIARY_BUS and NET_DEVLINK to Kconfig
pds_core: remove CONFIG_DEBUG_FS from makefile
ionic: catch failure from devlink_alloc
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull more i2c updates from Wolfram Sang:
"Some more driver bugfixes and a DT binding conversion"
* tag 'i2c-for-6.4-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
dt-bindings: i2c: brcm,kona-i2c: convert to YAML
i2c: gxp: fix build failure without CONFIG_I2C_SLAVE
i2c: imx-lpi2c: avoid taking clk_prepare mutex in PM callbacks
i2c: omap: Fix standard mode false ACK readings
i2c: tegra: Fix PEC support for SMBUS block read
|
|
There's a fix which landed in net-next, pull it in along
with the couple of minor cleanups.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
