summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2014-02-26mmc: sdhci-spear: Fix NULL pointer dereferenceSachin Kamat1-5/+3
pdata could be NULL if cd_gpio = -1. Dereference pdata only if it is not NULL. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-02-26mmc: wmt-sdmmc: Fix NULL pointer dereferenceSachin Kamat1-1/+3
'of_id' is dereferenced before NULL pointer check. Move it to after the check. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Tony Prisk <linux@prisktech.co.nz> Signed-off-by: Chris Ball <chris@printf.net>
2014-02-26mmc: ushc: Fix incorrect parameter in sizeofSachin Kamat1-1/+1
sizeof should be of the parent structure type. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-02-24mmc: sdhci-bcm-kona: Add basic use of clocksTim Kryger1-2/+35
Enable the external clock needed by the host controller during the probe and disable it during the remove. Signed-off-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Markus Mayer <markus.mayer@linaro.org> Reviewed-by: Matt Porter <matt.porter@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-02-23mmc: mmci: Enable support for busy detection for ux500 variantUlf Hansson2-8/+45
The ux500 variants have HW busy detection support, which is indicated by the busy_detect flag. For these variants let's enable the MMC_CAP_WAIT_WHILE_BUSY flag and add the support for it. The mmc core will provide the RSP_BUSY command flag for those requests we should care about busy detection. Regarding the max_busy_timeout, the HW don't support busy detection timeouts so at this initial step let's make it simple and set it to zero to indicate we are able to support any timeout. Cc: Russell King <linux@arm.linux.org.uk> Cc: Johan Rudholm <jrudholm@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-02-23mmc: mmci: Handle CMD irq before DATA irqUlf Hansson1-4/+5
In case of a read operation both MCI_CMDRESPEND and MCI_DATAEND can be set in the status register when entering the interrupt handler. This is due to that the card start sending data before the host has acknowledged the command response. To resolve the issue for this scenario, we must start by handling the CMD irq instead of the DATA irq. The reason is beacuse the completion of the DATA irq will not respect the current command and then causing it to be garbled. Cc: Russell King <linux@arm.linux.org.uk> Cc: Johan Rudholm <jrudholm@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-02-23mmc: block: Fixup busy detection while invoking stop cmd at recoveryUlf Hansson1-28/+55
When sending a stop command at the recovery path, use a R1B response when the failing data request are a WRITE. Thus we also care about the busy detection completion in this case. For a failing READ request, we use a R1 response for the stop command, since we don't need to care about busy detection in this case. To align behavior between hosts supporting MMC_CAP_WAIT_WHILE_BUSY and those who are not, we add a CMD13 polling method for the card's status. We also respect whether the host has specified the max_busy_timeout, which means we may fallback to CMD13 polling if the timeout is greater than what the host are able to support. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-02-23mmc: block: Respect hw busy detection in card_busy_detect()Ulf Hansson1-2/+8
Currently for write request we don't trust the hw busy detection to be fully handled by host, thus we also poll the card's status until we see it's gets out of the busy state. Still there are scenarios where it will a benefit to trust the hw busy detection done by the host, since no additional polling is needed. Let's prepare card_busy_detect() to be able to handle this. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-02-23mmc: block: Implement card_busy_detect() for busy detectionUlf Hansson1-35/+47
To complete a data write request we poll for the card's status register by sending CMD13. The are other scenarios when this polling method are needed, which is why we here moves this code to it's own function. No functional change. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-02-23mmc: block: Use R1 responses for stop cmds for read requestsUlf Hansson1-1/+6
While using open ended transmission and thus ending the transfer by sending a stop command, we shall use R1B only for writes and R1 shall be used for reads. Previously R1B were used in both cases. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-02-23mmc: core: Respect host's max_busy_timeout when sending sleep cmdUlf Hansson1-3/+16
When sending the sleep command for host drivers supporting MMC_CAP_WAIT_WHILE_BUSY, we need to confirm that max_busy_timeout is big enough comparing to the sleep timeout specified from card's EXT_CSD. If this isn't case, we use a R1 response instead of R1B and fallback to use a delay instead. Do note that a max_busy_timeout set to zero by the host, is interpreted as it can cope with whatever timeout the mmc core provides it with. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-02-23mmc: core: Use generic CMD6 time while switching to eMMC HS200 modeUlf Hansson1-1/+3
Conform to the eMMC spec and use the CMD6 generic timeout from the EXT_CSD register, when switching to HS200 mode. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-02-23mmc: core: Fixup busy detection for mmc switch operationsUlf Hansson1-7/+26
If the host controller supports busy detection in HW, we expect the MMC_CAP_WAIT_WHILE_BUSY to be set. Likewise the corresponding host->max_busy_timeout should reflect the maximum busy detection timeout supported by the host. Previously we expected a host that supported MMC_CAP_WAIT_WHILE_BUSY to cope with any timeout, which just isn't feasible due to HW limitations. For most switch operations, R1B responses are expected and thus we need to check for busy detection completion. To cope with cases where the requested busy detection timeout is greater than what the host are able to support, we fallback to use a R1 response instead. This will prevent the host from doing HW busy detection. In those cases, busy detection completion is handled by polling the for the card's status using CMD13. This is the same mechanism used when the host doesn't support MMC_CAP_WAIT_WHILE_BUSY. Do note, a host->max_busy_timeout set to zero, is interpreted by the mmc core as it don't know what the host supports. It will then provide the host with whatever timeout the mmc core finds suitable. For some cases the mmc core has unfurtunate no clue of what timeout to use. In these cases we provide the host with a timeout value of zero, which the host may interpret as use whatever timeout it finds suitable. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-02-23mmc: core: Minor simplifications to __mmc_switchUlf Hansson1-11/+9
Instead of using several references to card->host, let's use a local variable. That means we can remove the BUG_ON verifications for the same pointers. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-02-23mmc: core: Add ignore_crc flag to __mmc_switchUlf Hansson3-16/+19
Instead of handle specific adaptations, releated to certain switch operations, inside __mmc_switch, push this to be handled by the caller instead. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-02-23mmc: core: Rename cmd_timeout_ms to busy_timeoutUlf Hansson3-6/+6
To better reflect that the cmd_timeout_ms is directly related to the busy detection timeout, let's rename it. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-02-23mmc: core: Rename max_discard_to to max_busy_timeoutUlf Hansson2-4/+4
Rename host->max_discard_to to host->max_busy_timeout, to reflect that it tells the mmc core layer about the maximum supported busy detection timeout by the host. This timeout is at the moment only applicable to erase/trim/discard commands. By the renaming we provide the option of make use of it for other commands that cares about busy detection. In other words, those commands that wants an R1B response, like for example the mmc switch command. Do note that the max_busy_timeout is supposed to be specified only by hosts supporting MMC_CAP_WAIT_WHILE_BUSY. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-02-22mmc: core: Add DT bindings for eMMC HS200 1.8/1.2VJaehoon Chung1-0/+4
Provide the option to configure these speed modes per host, for those host driver's that can't distinguish this in runtime. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-02-22mmc: core: Add DT bindings for eMMC high-speed DDR 1.8/1.2VUlf Hansson1-0/+4
Provide the option to configure these speed modes per host, for those host driver's that can't distinguish this in runtime. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Chris Ball <chris@printf.net>
2014-02-22mmc: core: Add DT bindings for SD card's UHS bus speed modesUlf Hansson1-0/+10
Provide the option to configure these speed modes per host, for those host driver's that can't distinguish this in runtime. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Chris Ball <chris@printf.net>
2014-02-22mmc: rtsx: add support for pre_req and post_reqMicky Ching2-109/+441
Add support for non-blocking request, pre_req() runs dma_map_sg() and post_req() runs dma_unmap_sg(). This patch can increase card read/write speed, especially for high speed card and slow CPU(for some embedded platform). Users can get a great benefit from this patch. if CPU frequency is 800MHz, SDR104 or DDR50 card read/write speed may increase more than 15%. test results: intel i3(800MHz - 2.3GHz), SD card clock 208MHz performance mode(2.3GHz): Before: dd if=/dev/mmcblk0p1 of=/dev/null bs=64k count=1024 67108864 bytes (67 MB) copied, 1.18191 s, 56.8 MB/s After: dd if=/dev/mmcblk0p1 of=/dev/null bs=64k count=1024 67108864 bytes (67 MB) copied, 1.09276 s, 61.4 MB/s powersave mode(800MHz): Before: dd if=/dev/mmcblk0p1 of=/dev/null bs=64k count=1024 67108864 bytes (67 MB) copied, 1.29569 s, 51.8 MB/s After: dd if=/dev/mmcblk0p1 of=/dev/null bs=64k count=1024 67108864 bytes (67 MB) copied, 1.11218 s, 60.3 MB/s Signed-off-by: Micky Ching <micky_ching@realsil.com.cn> Signed-off-by: Chris Ball <chris@printf.net>
2014-02-22mmc: rtsx: modify phase searching method for tuningMicky Ching1-80/+32
The new phase searching method is more concise and easier to understand. Signed-off-by: Micky Ching <micky_ching@realsil.com.cn> Signed-off-by: Chris Ball <chris@printf.net>
2014-02-22mmc: rtsx: fix card poweroff bugMicky Ching1-1/+2
If the host driver removed while card in the slot, the host will not power off card power correctly. This bug is produced because host eject flag set before the last mmc_set_ios callback, we should set the eject flag after power off. Signed-off-by: Micky Ching <micky_ching@realsil.com.cn> Signed-off-by: Chris Ball <chris@printf.net>
2014-02-22mmc: sdhci: add support for realtek rts5250Micky Ching2-1/+22
Add support for realtek rts5250 pci card reader. The card reader has some problems with DDR50 mode, so add a new quirks2 for broken ddr50. Signed-off-by: Micky Ching <micky_ching@realsil.com.cn> Signed-off-by: Chris Ball <chris@printf.net>
2014-02-22mmc: omap: Add erase capabilityJarkko Nikula1-7/+11
This patch adds the erase capability to OMAP1/OMAP2420 MMC driver. Idea is the same than in commit 93caf8e ("omap_hsmmc: add erase capability") that we disable the data timeout interrupt for erases. Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Acked-by: Tony Lindgren <tony@atomide.com> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Chris Ball <chris@printf.net>
2014-02-22mmc: omap: Remove always set use_dma flag from struct mmc_omap_hostJarkko Nikula1-10/+5
Because use_dma is set only in mmc_omap_probe and unset nowhere there is no need to carry that flag in struct mmc_omap_host for mmc_omap_prepare_data function. Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Acked-by: Tony Lindgren <tony@atomide.com> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Chris Ball <chris@printf.net>
2014-02-22mmc: omap: Convert to devm_ioremap_resourceJarkko Nikula1-29/+12
Simplify probe and cleanup code by using devm_ioremap_resource. This also makes probe code to follow more common allocate private struct followed by other initialization style. Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Acked-by: Tony Lindgren <tony@atomide.com> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Chris Ball <chris@printf.net>
2014-02-22mmc: omap: Remove mem_res field from struct mmc_omap_hostJarkko Nikula1-3/+1
Field mem_res in struct mmc_omap_host is used only once in mmc_omap_probe when setting the phys_base field so we may just se the phys_base straight and remove needless mem_res. Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Acked-by: Tony Lindgren <tony@atomide.com> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Chris Ball <chris@printf.net>
2014-02-22mmc: omap: Remove duplicate host->irq assignmentJarkko Nikula1-1/+0
host-irq is set twice so remove needless one. Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Acked-by: Tony Lindgren <tony@atomide.com> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Chris Ball <chris@printf.net>
2014-02-22mmc: omap: Convert to devm_kzallocJarkko Nikula1-4/+2
Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Acked-by: Tony Lindgren <tony@atomide.com> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Chris Ball <chris@printf.net>
2014-02-22mmc: omap: Fix NULL pointer dereference due uninitialized cover_taskletJarkko Nikula1-5/+7
Omap MMC driver initialization can cause a NULL pointer dereference in tasklet_hi_action on Nokia N810 if its miniSD cover is open during driver initialization. [ 1.070000] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 1.080000] pgd = c0004000 [ 1.080000] [00000000] *pgd=00000000 [ 1.080000] Internal error: Oops: 80000005 [#1] PREEMPT ARM [ 1.080000] Modules linked in: [ 1.080000] CPU: 0 PID: 24 Comm: kworker/0:1 Not tainted 3.13.0-rc2+ #95 [ 1.080000] Workqueue: events menelaus_work [ 1.080000] task: c7863340 ti: c7878000 task.ti: c7878000 [ 1.080000] PC is at 0x0 [ 1.080000] LR is at tasklet_hi_action+0x68/0xa4 ... [ 1.080000] [<c003543c>] (tasklet_hi_action+0x68/0xa4) from [<c0034dd0>] (__do_softirq+0xbc/0x208) [ 1.080000] [<c0034dd0>] (__do_softirq+0xbc/0x208) from [<c003521c>] (irq_exit+0x84/0xac) [ 1.080000] [<c003521c>] (irq_exit+0x84/0xac) from [<c00135cc>] (handle_IRQ+0x64/0x84) [ 1.080000] [<c00135cc>] (handle_IRQ+0x64/0x84) from [<c000859c>] (omap2_intc_handle_irq+0x54/0x68) [ 1.080000] [<c000859c>] (omap2_intc_handle_irq+0x54/0x68) from [<c0015be0>] (__irq_svc+0x40/0x74) [ 1.080000] Exception stack(0xc7879d70 to 0xc7879db8) [ 1.080000] 9d60: 000003f1 0000000a 00000009 0000001c [ 1.080000] 9d80: c7879e70 c780bc10 c780bc10 00000000 00000001 00008603 c780bc78 c7879e4e [ 1.080000] 9da0: 00000002 c7879db8 c00343b0 c0160c9c 20000113 ffffffff [ 1.080000] [<c0015be0>] (__irq_svc+0x40/0x74) from [<c0160c9c>] (__aeabi_uidiv+0x20/0x9c) [ 1.080000] [<c0160c9c>] (__aeabi_uidiv+0x20/0x9c) from [<c00343b0>] (msecs_to_jiffies+0x18/0x24) [ 1.080000] [<c00343b0>] (msecs_to_jiffies+0x18/0x24) from [<c01ec3ec>] (omap_i2c_xfer+0x30c/0x458) [ 1.080000] [<c01ec3ec>] (omap_i2c_xfer+0x30c/0x458) from [<c01e9724>] (__i2c_transfer+0x3c/0x74) [ 1.080000] [<c01e9724>] (__i2c_transfer+0x3c/0x74) from [<c01eac4c>] (i2c_transfer+0x78/0x94) [ 1.080000] [<c01eac4c>] (i2c_transfer+0x78/0x94) from [<c01eb0bc>] (i2c_smbus_xfer+0x3c0/0x4f8) [ 1.080000] [<c01eb0bc>] (i2c_smbus_xfer+0x3c0/0x4f8) from [<c01eb414>] (i2c_smbus_write_byte_data+0x34/0x3c) [ 1.080000] [<c01eb414>] (i2c_smbus_write_byte_data+0x34/0x3c) from [<c01bb308>] (menelaus_write_reg+0x1c/0x40) [ 1.080000] [<c01bb308>] (menelaus_write_reg+0x1c/0x40) from [<c01bb904>] (menelaus_work+0xa0/0xc4) [ 1.080000] [<c01bb904>] (menelaus_work+0xa0/0xc4) from [<c00439c4>] (process_one_work+0x1fc/0x334) [ 1.080000] [<c00439c4>] (process_one_work+0x1fc/0x334) from [<c0043d6c>] (worker_thread+0x244/0x380) [ 1.080000] [<c0043d6c>] (worker_thread+0x244/0x380) from [<c0049d04>] (kthread+0xc0/0xd4) [ 1.080000] [<c0049d04>] (kthread+0xc0/0xd4) from [<c0012758>] (ret_from_fork+0x14/0x3c) [ 1.080000] Code: bad PC value [ 1.090000] ---[ end trace 7bc2fc7cd14f1d95 ]--- [ 1.100000] Kernel panic - not syncing: Fatal exception in interrupt Reason for this is that omap_notify_cover_event which calls tasklet_hi_schedule gets called before struct cover_tasklet is initialized. Call to omap_notify_cover_event on Nokia N810 happens from menelaus.c PMIC driver via board-n8x0.c during execution of mmc_add_host in case of open miniSD cover. Fix this by moving cover_timer and cover_tasklet initialization before mmc_add_host call in mmc_omap_new_slot. Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Acked-by: Tony Lindgren <tony@atomide.com> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Chris Ball <chris@printf.net>
2014-02-22mmc: sdhi: update sh_mobile_sdhi_of_data for r8a7791Kuninori Morimoto1-0/+1
This patch adds DT support for r8a7791. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Chris Ball <chris@printf.net>
2014-02-22mmc: sdhi: update sh_mobile_sdhi_of_data for r8a7790Kuninori Morimoto1-1/+9
This patch updates r8a7790 DT data to have SoC specific settings. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Chris Ball <chris@printf.net>
2014-02-22mmc: sdhi: update sh_mobile_sdhi_of_data for r8a7779Kuninori Morimoto1-1/+1
This patch updates r8a7779 DT data to have SoC specific settings. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Chris Ball <chris@printf.net>
2014-02-22mmc: sdhi: update sh_mobile_sdhi_of_data for r8a7778Kuninori Morimoto1-1/+8
This patch updates r8a7778 DT data to have SoC specific settings. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Chris Ball <chris@printf.net>
2014-02-22mmc: sdhi: tidyup sh_mobile_sdhi_of_match positionKuninori Morimoto1-13/+13
It is easier to read if sh_mobile_sdhi_of_cfg and sh_mobile_sdhi_of_match are closer. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Chris Ball <chris@printf.net>
2014-02-14mmc: core: Enable MMC_CAP2_CACHE_CTRL as defaultUlf Hansson2-6/+1
There are no reason to why the use of a non-volatile internal eMMC cache should be controlled by a host cap. Instead let's just enable it if the eMMC card supports it. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Seungwon Jeon <tgih.jun@samsung.com> Signed-off-by: Chris Ball <chris@printf.net>
2014-02-14mmc: core: Use mmc_flush_cache() during mmc suspendUlf Hansson2-39/+1
Earlier we disabled the cache during suspend, which meant a flush was internally at the eMMC performed as well. To simplify code we can make use of the mmc_flush_cache(), during mmc suspend, which makes the mmc_cache_ctrl() redundant so then we can remove it. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Seungwon Jeon <tgih.jun@samsung.com> Signed-off-by: Chris Ball <chris@printf.net>
2014-02-14mmc: core: Remove support for MMC_CAP2_NO_SLEEP_CMDUlf Hansson1-3/+0
There are no active users of this host capability. The primary reason for adding this cap was due to a bug in ux500 boot loader code, which is not a relevant issue any more. So, let's remove it. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-02-14mmc: card: Remove host cap MMC_CAP2_SANITIZEUlf Hansson1-2/+1
There is no need for keeping a host cap for MMC_CAP2_SANITIZE, instead we just make the feature default available. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-02-14mmc: core: Remove unnecessary validations for bus_ops callbacksUlf Hansson2-18/+7
Due to the removal of the Kconfig option MMC_UNSAFE_RESUME, several validations of a present bus_ops callback became redundant. Let's remove these. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-02-14mmc: core: Use MMC_UNSAFE_RESUME as default behaviorUlf Hansson4-76/+2
Invoking system suspend or shutdown without using the Kconfig option MMC_UNSAFE_RESUME, did trigger an ungraceful power cut of the card. To improve the situation, change the behavior to always make use of the available bus_ops callbacks that handles system suspend and shutdown properly. By changing the behavior MMC_UNSAFE_RESUME becomes redundant, so lets's remove it. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-02-14mmc: tmio: Adapt to proper PM configs for exported functionsUlf Hansson2-7/+7
Since the users of the exported PM functions are now using the modern PM ops macros, we can convert to the proper corresponding PM configs. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <chris@printf.net>
2014-02-14mmc: tmio_mmc: Convert from legacy to modern PM opsUlf Hansson1-14/+16
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <chris@printf.net>
2014-02-14mmc: sh_mobile_sdhi: Use modern PM macros to define pm callbacksUlf Hansson1-4/+4
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <chris@printf.net>
2014-02-10Merge branch 'for-linus' of ↵Linus Torvalds1-6/+3
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs fixes from Al Viro: "A couple of fixes, both -stable fodder. The O_SYNC bug is fairly old..." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fix a kmap leak in virtio_console fix O_SYNC|O_APPEND syncing the wrong range on write()
2014-02-10fix a kmap leak in virtio_consoleAl Viro1-6/+3
While we are at it, don't do kmap() under kmap_atomic(), *especially* for a page we'd allocated with GFP_KERNEL. It's spelled "page_address", and had that been more than that, we'd have a real trouble - kmap_high() can block, and doing that while holding kmap_atomic() is a Bad Idea(tm). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-02-09Merge tag 'pinctrl-v3.14-2' of ↵Linus Torvalds6-15/+32
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pinctrl fixes from Linus Walleij: "First round of pin control fixes for v3.14: - Protect pinctrl_list_add() with the proper mutex. This was identified by RedHat. Caused nasty locking warnings was rootcased by Stanislaw Gruszka. - Avoid adding dangerous debugfs files when either half of the subsystem is unused: pinmux or pinconf. - Various fixes to various drivers: locking, hardware particulars, DT parsing, error codes" * tag 'pinctrl-v3.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: tegra: return correct error type pinctrl: do not init debugfs entries for unimplemented functionalities pinctrl: protect pinctrl_list add pinctrl: sirf: correct the pin index of ac97_pins group pinctrl: imx27: fix offset calculation in imx_read_2bit pinctrl: vt8500: Change devicetree data parsing pinctrl: imx27: fix wrong offset to ICONFB pinctrl: at91: use locked variant of irq_set_handler
2014-02-08watchdog: dw_wdt: Add dependency on HAS_IOMEMRichard Weinberger1-0/+1
On archs like S390 or um this driver cannot build nor work. Make it depend on HAS_IOMEM to bypass build failures. drivers/built-in.o: In function `dw_wdt_drv_probe': drivers/watchdog/dw_wdt.c:302: undefined reference to `devm_ioremap_resource' Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-02-08Merge branch 'v4l_for_linus' of ↵Linus Torvalds31-71/+83
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: "A series of small fixes. Mostly driver ones. There is one core regression fix on a patch that was meant to fix some race issues on vb2, but that actually caused more harm than good. So, we're just reverting it for now" * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] adv7842: Composite free-run platfrom-data fix [media] v4l2-dv-timings: fix GTF calculation [media] hdpvr: Fix memory leak in debug [media] af9035: add ID [2040:f900] Hauppauge WinTV-MiniStick 2 [media] mxl111sf: Fix compile when CONFIG_DVB_USB_MXL111SF is unset [media] mxl111sf: Fix unintentional garbage stack read [media] cx24117: use a valid dev pointer for dev_err printout [media] cx24117: remove dead code in always 'false' if statement [media] update Michael Krufky's email address [media] vb2: Check if there are buffers before streamon [media] Revert "[media] videobuf_vm_{open,close} race fixes" [media] go7007-loader: fix usb_dev leak [media] media: bt8xx: add missing put_device call [media] exynos4-is: Compile in fimc-lite runtime PM callbacks conditionally [media] exynos4-is: Compile in fimc runtime PM callbacks conditionally [media] exynos4-is: Fix error paths in probe() for !pm_runtime_enabled() [media] s5p-jpeg: Fix wrong NV12 format parameters [media] s5k5baf: allow to handle arbitrary long i2c sequences
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-08 02:54:01 +0300