summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2010-09-16tg3: Don't send APE events for NCSI firmwareMatt Carlson2-3/+28
NCSI firmware does not accept APE events. It relies on a "driver state" location in shared memory to tell it what the driver's current state is. This patch pivots the code to use the new driver state scheme. Reviewed-by: Benjamin Li <benli@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-16tg3: Disable TSSMatt Carlson1-8/+1
It was recently discovered that enabling TSS can lockup the device. This patch disables the feature until a suitable workaround can be found. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-16tg3: Fix read DMA FIFO overruns on recent devicesMatt Carlson2-1/+15
Earlier versions of tg3 devices had a problem where the read DMA FIFO could be overrun in certain edge conditions. The fix was to limit the number of rx BDs the hardware would fetch at a time. For later devices (5761, 5784 and later ASIC revs), there is a hardware fix that must be enabled to fix the same problem. This patch adds that hardware fix. There is a gap in the ASIC revision lineage where neither fix is applied. This is intentional as these ASIC revisions are not afflicted by the bug. Reviewed-by: Benjamin Li <benli@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-15drivers/net/wireless: Use static const char * const where possibleJoe Perches1-1/+1
Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-15drivers/net/pcmcia: Use static const char * const where possibleJoe Perches1-1/+1
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-15drivers/net: Use static const char * const where possibleJoe Perches2-2/+6
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-15drivers/isdn: Use static const char * const where possibleJoe Perches2-2/+2
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-15e1000e: Simplify MSI interrupt testingJean Delvare1-25/+4
The code is quite convoluted, simplify it. This also avoids calling e1000_request_irq() without testing the value it returned, which was bad. Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Bruce Allan <bruce.w.allan@intel.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-14uwb: use '%pM' format to print MAC addressAndy Shevchenko2-9/+3
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-14bnx2x: Spread rx buffers between allocated queuesDmitry Kravkov4-5/+17
Default number of rx buffers will be divided equally between allocated queues. This will decrease amount of pre-allocated buffers on systems with multiple CPUs. User can override this behavior with ethtool -G. Minimum amount of rx buffers per queue set to 128. Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-14cx82310_eth: allow empty URBsOndrej Zary1-9/+3
Empty received URBs are currently counted as errors but the device sends them sometimes as part of regular traffic - so remove this check. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-14cx82310_eth: check usb_string() return value for errorOndrej Zary1-5/+3
Fix that usb_string() return value is not checked for error (negative value). Also change the ignore message a bit and lower its level to info. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-14drivers/net/skfp: Remove pr_<level> uses of KERN_<level>Joe Perches1-42/+42
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-14net/cxgb3: remove undefined operationsAndreas Schwab1-1/+1
Modifying an object twice without an intervening sequence point is undefined. Signed-off-by: Andreas Schwab <schwab@linux-m68k.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-14net/de4x5: remove undefined operationsAndreas Schwab1-9/+9
Modifying an object twice without an intervening sequence point is undefined. Signed-off-by: Andreas Schwab <schwab@linux-m68k.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-14sundance: Add power management hooksDenis Kirjanov1-0/+48
This patch to adds support for PM hooks into sundance driver Signed-off-by: Denis Kirjanov <dkirjanov@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-14sfc: Fix order of channel_name array dimensionsBen Hutchings1-1/+1
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-12bna: Check for NULL before deref in bnad_cb_tx_cleanupDavid S. Miller1-1/+2
Reported-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-10sfc: Allow changing the DMA ring sizes dynamically via ethtoolBen Hutchings5-52/+224
This requires some reorganisation of channel setup and teardown to ensure that we can always roll-back a failed change. Based on work by Steve Hodgson <shodgson@solarflare.com> Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-10sfc: Make the dmaq size a run-time setting (rather than compile-time)Steve Hodgson7-76/+109
- Allow the ring size to be specified in non power-of-two sizes (for instance to limit the amount of receive buffers). - Automatically size the event queue. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-10sfc: Allocate each channel separately, along with its RX and TX queuesBen Hutchings3-76/+61
This will allow for reallocation of channel structures and rings. Change module parameter separate_tx_channels to be read-only, since we now require its value to be constant. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-10sfc: Refactor channel and queue lookup and iterationBen Hutchings7-75/+125
In preparation for changes to the way channels and queue structures are allocated, revise the macros and functions used to look up and iterator over them. - Replace efx_for_each_tx_queue() with iteration over channels then TX queues - Replace efx_for_each_rx_queue() with iteration over channels then RX queues (with one exception, shortly to be removed) - Introduce efx_get_{channel,rx_queue,tx_queue}() functions to look up channels and queues by index - Introduce efx_channel_get_{rx,tx}_queue() functions to look up a channel's queues Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-10sfc: Abstract channel and index lookup for RX queuesBen Hutchings3-33/+47
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-10sfc: Allocate DMA and event rings using GFP_KERNELBen Hutchings1-4/+4
Currently we allocate DMA descriptor rings and event rings using pci_alloc_consistent() which selects non-blocking behaviour from the page allocator (GFP_ATOMIC). This is unnecessary, and since we currently allocate a single contiguous block for each ring (up to 32 pages!) these allocations are likely to fail if there is any significant memory pressure. Use dma_alloc_coherent() and GFP_KERNEL instead. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-10sfc: Fix failure paths in efx_probe_port()Ben Hutchings1-2/+2
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-10sfc: Remove declarations of functions that no longer existBen Hutchings1-2/+0
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-10sfc: Accumulate RX_NODESC_DROP count in rx_dropped, not rx_over_errorsBen Hutchings1-1/+1
rx_over_errors appears to be intended as a count of packets that overflow a packet buffer in the NIC. Given that we implement a cut-through receive path, this should always be 0. rx_dropped appears to be the correct counter for packets dropped due to lack of host buffers. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-10sfc: Use MCDI RX_BAD_FCS_PKTS count as MAC rx_bad countBen Hutchings1-1/+1
Calculating rx_bad as rx_packets - rx_good is unnecessary and incorrect, since rx_good does not include control frames (e.g. pause frames) and rx_packets does. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-10Merge branch 'master' of ↵David S. Miller283-9099/+5821
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: net/mac80211/main.c
2010-09-10Merge branch 'vhost-net' of ↵David S. Miller1-22/+58
git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
2010-09-10drivers/net/bnx2x: use ARRAY_SIZE macro in bnx2x_main.cNikitas Angelinas1-3/+2
Replace sizeof(bnx2x_parity_mask)/(sizeof(bnx2x_parity_mask[0]) with ARRAY_SIZE(bnx2x_parity_mask) in drivers/net/bnx2x/bnx2x_main.c Signed-off-by: Nikitas Angelinas <nikitasangelinas@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-10ipheth: remove incorrect devtype to WWANDan Williams1-6/+1
The 'wwan' devtype is meant for devices that require preconfiguration and *every* time setup before the ethernet interface can be used, like cellular modems which require a series of setup commands on serial ports or other mechanisms before the ethernet interface will handle packets. As ipheth only requires one-per-hotplug pairing setup with no preconfiguration (like APN, phone #, etc) and the network interface is usable at any time after that initial setup, remove the incorrect devtype wwan. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-10au1000-eth: change multi-line comments styleFlorian Fainelli2-14/+30
Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-10au1000-eth: remove volatiles, switch to I/O accessorsFlorian Fainelli2-52/+65
Remove all the volatile keywords where they were used, switch to using the proper readl/writel accessors. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-10au1000-eth: fix asm -> linux headers inclusionFlorian Fainelli1-2/+2
Replace asm/io.h and asm/cpu.h wih linux/io.h and linux/cpu.h Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-10au1000-eth: fix bad printk usagesFlorian Fainelli1-10/+15
Use pr_(info|err) and pr_cont where required instead of calls to printk. Add missing pr_fmt to the driver. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-10au1000-eth: fix all but one "line over 80 characters warnings"Florian Fainelli2-48/+61
One line has not been changed because it would not improve readability. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-10au1000-eth: stylistic fixesFlorian Fainelli1-16/+16
This patch fixes the following checkpatch.pl warnings: - spaces after tabs - space between function and arguments - one-line statement braces - tabs instead of spaces Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-10au1000-eth: typedefs removalFlorian Fainelli2-28/+28
Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-10ixgbevf: remove private net_device_statsEric Dumazet2-22/+5
Use the net_device provided net_device_stats structure. Remove ixgbevf_get_stats() now its not needed. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-09Merge branch 'master' of ↵David S. Miller2461-74404/+197019
master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6
2010-09-09KS8851: Correct RX packet allocationEric Dumazet1-18/+21
Use netdev_alloc_skb_ip_align() helper and do correct allocation Tested-by: Abraham Arce <x0066660@ti.com> Signed-off-by: Abraham Arce <x0066660@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-09atlx: make strings constStephen Hemminger1-3/+3
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Chris Snook <chris.snook@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-09cxacru: ignore cx82310_eth devicesOndrej Zary1-1/+17
Ignore ADSL routers, which can have the same vendor and product IDs as ADSL modems but should be handled by the cx82310_eth driver. This intentionally ignores device IDs that aren't currently handled by cx82310_eth. There may be other device IDs that perhaps shouldn't be claimed by cxacru. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-09ixgbevf: Removed unneeded HW struct membersGreg Rose1-2/+0
The VF has no flash and can only do memory mapped I/O. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-09drivers/net/ixgbe/ixgbe_main.c: Add ixgbe_psumJoe Perches1-146/+151
Reduce indentation in a couple of places Add static function ixgbe_psum Add temporary for adapter->stats Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-09drivers/net/ixgbe/ixgbe_main.c: Use pr_<level>Joe Perches1-38/+36
Did not add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt because no printk in this module used message prefixing. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-09drivers/net/ixgbe/ixgbe_main.c: Checkpatch cleanupsJoe Perches1-231/+236
Whitespace cleanups. Move inline keyword after function type declarations. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-09ixgbe: fix TX ring enable issues seen when VMDQ is enabledAlexander Duyck1-1/+1
The ordering of operations was messed up in the init and as a result when VMDQ was enabled we were trying to enable TX rings before setting the VFTE bits. This resulted in a ring that appeared to fail to enable when in fact it was blocked because the VFTE bits were cleared after the reset. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-09qeth: NAPI support for l2 and l3 disciplineFrank Blaschka4-138/+260
This patch adds NAPI support to the qeth layer 2 and layer 3 discipline. It is important to understand that we can not enable/disable IRQs as usual, we have to use the corresponding new QDIO interface. Also to not overdraw the budget we have to stop and restart buffer processing at any point during processing a bulk of QDIO buffers. Having the driver NAPI enabled it is possible to turn on GRO for the layer 3 discipline. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-02-04 16:56:49 +0300