summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2013-11-25mac80211_hwsim: VHT add 160MHz width supportJanusz Dziedzic1-0/+1
Add 160MHz width support. This could be usefull for testing VHT160 DFS functionality. This could be also usefull in the future when DFS and non-DFS channels could be mixed. Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25mac80211_hwsim: Add iface comb for DFSJanusz Dziedzic1-8/+42
Add iface combination that will allow DFS support. Add also debugfs dfs_simulate_radar file that can be used to simulate radar event. This could be useful for mac80211/cfg80211/ regulatory/hostap code testing without real HW. Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25mac80211_hwsim: use debugfs_remove_recursiveJanusz Dziedzic1-11/+5
Use debugfs_remove_recursive. That avoids the need for the new dentry pointers and extra debugfs_remove calls. Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25cfg80211: consolidate passive-scan and no-ibss flagsLuis R. Rodriguez26-169/+140
These two flags are used for the same purpose, just combine them into a no-ir flag to annotate no initiating radiation is allowed. Old userspace sending either flag will have it treated as the no-ir flag. To be considerate to older userspace we also send both the no-ir flag and the old no-ibss flags. Newer userspace will have to be aware of older kernels. Update all places in the tree using these flags with the following semantic patch: @@ @@ -NL80211_RRF_PASSIVE_SCAN +NL80211_RRF_NO_IR @@ @@ -NL80211_RRF_NO_IBSS +NL80211_RRF_NO_IR @@ @@ -IEEE80211_CHAN_PASSIVE_SCAN +IEEE80211_CHAN_NO_IR @@ @@ -IEEE80211_CHAN_NO_IBSS +IEEE80211_CHAN_NO_IR @@ @@ -NL80211_RRF_NO_IR | NL80211_RRF_NO_IR +NL80211_RRF_NO_IR @@ @@ -IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_IR +IEEE80211_CHAN_NO_IR @@ @@ -(NL80211_RRF_NO_IR) +NL80211_RRF_NO_IR @@ @@ -(IEEE80211_CHAN_NO_IR) +IEEE80211_CHAN_NO_IR Along with some hand-optimisations in documentation, to remove duplicates and to fix some indentation. Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> [do all the driver updates in one go] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-06Merge branch 'master' of ↵John W. Linville1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
2013-11-06Merge branch 'for-john' of ↵John W. Linville13-29/+43
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
2013-11-06Merge branch 'for-linville' of ↵John W. Linville16-53/+175
git://git.kernel.org/pub/scm/linux/kernel/git/luca/wl12xx
2013-11-06Merge branch 'for-john' of ↵John W. Linville1-3/+24
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Conflicts: net/wireless/reg.c
2013-11-04Merge branch 'master' of ↵John W. Linville38-178/+250
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: drivers/net/wireless/iwlwifi/pcie/drv.c
2013-10-30iwlwifi: mvm: BT Coex - fix copy paste issueEmmanuel Grumbach1-1/+1
Putting the context id of the primary phy context in the placeholder of the secondary is obviously a bad idea. Spotted by smatch. Fixes: dac94da8dba3 ("iwlwifi: mvm: new BT Coex API") Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-10-29iwlwifi: remove duplicate includesMichael Opdenacker2-2/+0
Reported by "make includecheck" Tested that the corresponding sources still compile well on x86 Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-10-29iwlwifi: warn if firmware image doesn't existJohannes Berg2-10/+7
If the firmware image that we attempt to load doesn't actually exist we have a broken firmware file or other code not checking things correctly, so warn in such a case. Also avoid assigning cur_ucode/ucode_loaded then. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-10-29iwlwifi: mvm: add missing break in debugfsJohannes Berg1-0/+1
When writing the disable_power_off value, the LPRX enable value also gets written unintentionally, so fix that by adding the missing break statement. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-10-29iwlwifi: mvm: capture the FCS in monitor modeJohannes Berg2-2/+12
This can be useful when using the device as a sniffer. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-10-29iwlwifi: pcie: move warning message into warningJohannes Berg1-5/+4
Having a WARN_ON() followed by a printed message is less useful than having the message in the warning so move the message. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-10-29iwlwifi: mvm: BT Coex fix NULL pointer dereferenceEmmanuel Grumbach1-1/+5
When we disassociate, mac80211 removes the station and then, it sets the bss it unsets the assoc bool in bss_info. Since the firwmware wants it the opposite (first set the MAC context as unassoc, and only then, remove the STA of the API), we have a small period of time in which the STA in firmware doesn't have a valid ieee80211_sta pointer. During that time, iwl_mvm_vif->ap_sta_id, is still set to the STA in firmware that represent the AP. This avoids: [ 4481.476246] BUG: unable to handle kernel NULL pointer dereference at 00000045 [ 4481.479521] IP: [<f8416a6a>] iwl_mvm_bt_coex_reduced_txp+0x7a/0x190 [iwlmvm] [ 4481.482023] *pde = 00000000 [ 4481.484332] Oops: 0000 [#1] SMP DEBUG_PAGEALLOC [ 4481.486897] Modules linked in: netconsole configfs autofs4 rfcomm(O) bnep(O) nfsd nfs_acl auth_rpcgss exportfs nfs lockd binfmt_misc sunrpc fscache arc4 iwlmvm(O) mac80211(O) btusb(O) iwlwifi(O) bluetooth(O) cfg80211(O) snd_hda_codec_hdmi coretemp dell_wmi snd_hda_codec_idt compat(O) dell_laptop aesni_intel i915 sparse_keymap dcdbas cryptd psmouse serio_raw aes_i586 microcode snd_hda_intel drm_kms_helper snd_hda_codec drm snd_pcm snd_timer i2c_algo_bit video intel_agp intel_gtt snd soundcore snd_page_alloc crc32c_intel ahci sdhci_pci libahci sdhci mmc_core e1000e xhci_hcd [last unloaded: configfs] [ 4481.502983] [ 4481.505599] Pid: 6507, comm: kworker/0:1 Tainted: G O 3.4.43-dev #1 Dell Inc. Latitude E6430/0CMDYV [ 4481.508575] EIP: 0060:[<f8416a6a>] EFLAGS: 00010246 CPU: 0 [ 4481.511248] EIP is at iwl_mvm_bt_coex_reduced_txp+0x7a/0x190 [iwlmvm] [ 4481.513947] EAX: ffffffea EBX: 00000002 ECX: 00000001 EDX: 00000001 [ 4481.516710] ESI: ec6f0f28 EDI: 00000000 EBP: e8175dfc ESP: e8175d9c [ 4481.519445] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 [ 4481.522185] CR0: 8005003b CR2: 00000045 CR3: 01a5e000 CR4: 001407d0 [ 4481.524950] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 [ 4481.527768] DR6: ffff0ff0 DR7: 00000400 [ 4481.530565] Process kworker/0:1 (pid: 6507, ti=e8174000 task=e8032b20 task.ti=e8174000) [ 4481.533447] Stack: [ 4481.536379] e472439f 00003a12 e8032b20 e8033048 00000001 e8175ddc 00000246 e8033040 [ 4481.540132] 00000002 01814990 ec4d1ddc e8175dcc 00000000 00000000 00000000 00000000 [ 4481.543867] 00000000 00000000 00000001 000001c8 009b0002 ec4d1ddc ec6f0f28 00000000 [ 4481.547633] Call Trace: [ 4481.550578] [<f8418027>] iwl_mvm_bt_rssi_event+0x197/0x220 [iwlmvm] [ 4481.553537] [<f840919c>] iwl_mvm_stat_iterator+0xdc/0x240 [iwlmvm] [ 4481.556582] [<f8d129c2>] __iterate_active_interfaces+0xe2/0x1f0 [mac80211] [ 4481.559544] [<f84090c0>] ? iwl_mvm_update_smps+0x90/0x90 [iwlmvm] [ 4481.562519] [<f84090c0>] ? iwl_mvm_update_smps+0x90/0x90 [iwlmvm] [ 4481.565498] [<f8d12b0c>] ieee80211_iterate_active_interfaces+0x3c/0x50 [mac80211] [ 4481.568421] [<f8409b43>] iwl_mvm_rx_statistics+0xb3/0x130 [iwlmvm] [ 4481.571349] [<f8405431>] iwl_mvm_async_handlers_wk+0xc1/0xf0 [iwlmvm] [ 4481.574251] [<c1052915>] ? process_one_work+0x105/0x5c0 [ 4481.577162] [<c1052991>] process_one_work+0x181/0x5c0 [ 4481.580025] [<c1052915>] ? process_one_work+0x105/0x5c0 [ 4481.582861] [<f8405370>] ? iwl_mvm_rx_fw_logs+0x20/0x20 [iwlmvm] [ 4481.585722] [<c10530f1>] worker_thread+0x121/0x2c0 [ 4481.588536] [<c1052fd0>] ? rescuer_thread+0x1d0/0x1d0 [ 4481.591323] [<c105af0d>] kthread+0x7d/0x90 [ 4481.594059] [<c105ae90>] ? flush_kthread_worker+0x120/0x120 [ 4481.596868] [<c15b7cc2>] kernel_thread_helper+0x6/0x10 [ 4481.599605] Code: 9d de c3 c8 85 c0 74 0d 80 3d f8 ae 42 f8 00 0f 84 dc 00 00 00 8b 45 c8 0f b6 d3 31 ff 89 55 c0 8b 84 90 d8 03 00 00 0f b6 55 c7 <38> 50 5b 89 45 bc 0f 84 a8 00 00 00 a1 e4 d2 04 c2 85 c0 0f 84 [ 4481.611782] EIP: [<f8416a6a>] iwl_mvm_bt_coex_reduced_txp+0x7a/0x190 [iwlmvm] SS:ESP 0068:e8175d9c [ 4481.614985] CR2: 0000000000000045 [ 4481.687441] ---[ end trace b11bc915fbac4412 ]--- Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-10-29iwlwifi: transport config n_no_reclaim_cmds should be unsignedJohannes Berg1-1/+1
The number of commands can never be negative, so it should be using an unsigned type. This also shuts up an smatch warning elsewhere in the code. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-10-29iwlwifi: mvm: update UAPSD support TLV bitsAlexander Bondar3-7/+12
Change old UAPSD bit to PM_CMD_SUPPORT, and add a new bit to indicate real UAPSD support. Don't use UAPSD when the firmware doesn't support it. Signed-off-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-10-28mac80211_hwsim: Fix tracking of beaconing for multi-vifJouni Malinen1-3/+24
mac80211_hwsim canceled beacon_timer on any vif changing from enabled to disabled beaconing. This breaks cases where there are multiple beaconing vifs and only one of them is removed. Fix this by tracking beaconing status per vif and disable beacon_timer only if no active vif remain with beaconing enabled. Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-23wlcore: save last regdom configuration on stopEliad Peller1-1/+3
In order to reconfigure the correct reg domain on recovery, we have to save the current configuration before clearing it (wl->reg_ch_conf_pending is considered before configuring a new regdomain). Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
2013-10-23wlcore: fix started_vifs calculationEliad Peller1-1/+23
wlcore configures different dwell times according to number of active interfaces (in order to prevent hurting VO during scan). However, determining active vif only according to bss_conf->idle is not explicit enough, and might result in non-started vifs being counted as started as well (e.g. unassociated sta during sta). Fix it by checking for explicit conditions according to the vif type. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
2013-10-23wlcore: wakeup from ELP before starting recoveryBarak Bercovitz1-0/+1
Make sure the FW is awake when entering recovery. This is useful for reading the FW panic log and also some FW registers giving us crash report stats. We must do this before interrupts are disabled since we rely on an interrupt to complete the wakeup. If the wakeup fails, continue recovery normally. All read/writes will be blocked and won't do any harm. Signed-off-by: Barak Bercovitz <barak@wizery.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
2013-10-23wlcore: Allow stopping fw log in recoveryBarak Bercovitz1-1/+2
The FW panic log is read during recovery work. It has to be stopped properly before reading. otherwise, inconsistent data might be read which cause the driver to freeze. __wlcore_cmd_send has to work for the special case of CMD_STOP_FWLOGGER, while in recovery, in order to stop the fw log before it is read. Signed-off-by: Barak Bercovitz <barak@wizery.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
2013-10-23wlcore: read fw panic log only in host modeBarak Bercovitz1-1/+2
Reading FW panic log is only supported in host mode (SDIO) Signed-off-by: Barak Bercovitz <barak@wizery.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
2013-10-23wlcore/wl18xx/wl12xx: FW log params per chip archIgal Chernobelsky7-23/+61
FW memory block size and FW log end marker parameters are added to wl structure and are initialized per chip architecture. convert_hwaddr hw operation is added to convert chip dependent FW internal address. Copy from FW log is also simplified to copy the entire memory block as FW logger utility is repsponsible for parsing of FW log content. Signed-off-by: Igal Chernobelsky <igalc@ti.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
2013-10-23wl12xx/wl18xx: update default fw logger's settingsIdo Reis2-4/+4
update the fw logger mode to continuous, and output to dbgpins (uart). Signed-off-by: Ido Reis <idor@ti.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
2013-10-23wlcore: fwlog dynamic mem_block controlIdo Reis2-1/+20
number of fwlog mem_blocks can be configured using module param. this is a fw debug feature: in case a large fw log data is busrted during a short period of time, the memory get filled and data is lost. this allows us to dynamicly set the fw log mem_block usage, although configuring more mem_block for logger comes at the expense of TP. Signed-off-by: Yair Shapira <yair.shapira@ti.com> Signed-off-by: Ido Reis <idor@ti.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
2013-10-23wlcore: fix interrogate command lengthIgal Chernobelsky4-10/+15
Change interrogate command prototype to have command size and returned buffer length. This fixes the issue when command parameters are needed to be passed to FW in addition to acx header as in the case with get RSSI command, where role_id has to be passed. Signed-off-by: Igal Chernobelsky <igalc@ti.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
2013-10-23wlcore: add ap_event_maskEliad Peller6-2/+19
Add new ap_event_mask field, to indicate events that should be unmasked only when there's an ap interface. This is done in order to avoid spurious wakeups when we don't care about the incoming event anyway. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
2013-10-23wlcore: print active channel in the driver_stateVictor Goldenshtein1-1/+17
Print current active channel/s and a role type for that channel in the driver_state debugfs. Signed-off-by: Victor Goldenshtein <victorg@ti.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
2013-10-23wl18xx: default config alignment with phy defaultsIgal Chernobelsky1-8/+8
Driver default config is aligned with phy default parameters. Now that RDL1_3 has 2 antennas defined by default we need to explicitly define ht.mode to HT_MODE_WIDE to have SISO40 as default. Signed-off-by: Yair Shapira <yair.shapira@ti.com> Signed-off-by: Igal Chernobelsky <igalc@ti.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
2013-10-18rt2x00: rt2800pci: use module_pci_driver macroGabor Juhos1-13/+1
Use the module_pci_driver() macro to make the code simpler by eliminating module_init and module_exit calls. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-18rt2x00: rt2800pci: move SoC specific code into a separate moduleGabor Juhos4-245/+284
The PCI and SoC specific drivers are using separate code now so it is not reasonable to use the same module for both drivers anymore. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-18rt2x00: rt2800pci: use separate hwcrypt_disabled callback for SoC devicesGabor Juhos1-2/+7
The 'rt2800pci_hwcrypt_disabled' function is the only PCI specific callback which is used by the SoC driver. Create a clone of that to get rid of the dependency. Even though the two functions are using the same variable, but the SoC specific code will be moved into a separate module which will have its own 'modparam_nohwcrypt' variable. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-18rt2x00: rt2800pci: move rt2800mmio_enable_radio function to another moduleGabor Juhos3-13/+18
Move the function into the rt2800mmio module, in order to make it usable from other modules. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-18rt2x00: rt2800pci: split rt2800pci_enable_radio functionGabor Juhos1-7/+12
The function is called for PCI and SoC devices however the MCU related part of the function has no effect on SoC devices. Move the common part of the function into a separate helper and use that for the SoC devices. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-18rt2x00: rt2800pci: rename rt2800pci_disable_radio functionGabor Juhos1-11/+8
The function contain code for SoC devices only. Rename the function to 'rt2800soc_disable_radio' and move it to the SoC specific section. Use the renamed function in the SoC specific code only and remove the 'if rt2x00_is_soc(rt2x00dev)' condition from the function body. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-18rt2x00: rt2800pci: use separate set_state callback for SoC devicesGabor Juhos1-2/+41
The 'rt2800pci_set_state' function uses MCU commands to set the device state, however these have no effect on SoC devices. Use a different set_state callback which does not use the MCU fcuntions. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-18rt2x00: rt2800pci: use separate firmware callbacks for SoC devicesGabor Juhos1-5/+33
Use empty firmware callbacks for SoC devices because those don't require firmware. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-18rt2x00: rt2800pci: use separate read_eeprom callback for SoC devicesGabor Juhos1-40/+16
Rename the 'rt2800pci_read_eeprom_soc function' to 'rt2800soc_read_eeprom' and use that directly in the SoC specific 'rt2800_ops' structure. Also move the 'rt2800pci_eeprom_read' function into an 'ifdef PCI' section and remove the 'rt2800pci_read_eeprom_soc' call from that. Additionally, remove the dummy inline eeprom functions. Those are not used anymore. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-18rt2x00: rt2800pci: use separate ops for the SoC driverGabor Juhos1-2/+102
This makes it possible to use different callback functions for PCI and SoC devices which will allow to move the SoC driver into a separate module. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-18rt2x00: rt2800pci: move initialization functions to the rt2800mmio moduleGabor Juhos3-159/+169
Move the functions into a separate module, in order to make those usable from other modules. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-18rt2x00: rt2800pci: use rt2800mmio prefix for initialization functionsGabor Juhos1-8/+8
The functions are used for devices with memory mapped I/O and contain no PCI specific code at all. Use rt2800mmio prefix instead of rt2800pci in the function names to reflect that. The patch contains no functional changes. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-18rt2x00: rt2800pci: move queue functions to the rt2800mmio moduleGabor Juhos4-142/+152
Move the functions into a separate module, in order to make those usable from other modules. Also move the queue register offset macros from rt2800pci.h into rt2800mmio.h. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-18rt2x00: rt2800pci: use rt2800mmio prefix for queue functionsGabor Juhos1-8/+8
The functions are used for devices with memory mapped I/O and contain no PCI specific code at all. Use rt2800mmio prefix instead of rt2800pci in the function names to reflect that. The patch contains no functional changes. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-18rt2x00: rt2800pci: move interrupt functions to the rt2800mmio moduleGabor Juhos3-388/+405
Move the functions into a separate module, in order to make those usable from other modules. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-18rt2x00: rt2800pci: use rt2800mmio prefix for interrupt functionsGabor Juhos1-36/+37
The functions are used for devices with memory mapped I/O and contain no PCI specific code at all. Use rt2800mmio prefix instead of rt2800pci in the function names to reflect that. The patch contains no functional changes. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-18rt2x00: rt2800pci: move RX control handler functions to the rt2800mmio moduleGabor Juhos5-107/+108
Move the functions into a separate module, in order to make those usable from other modules. Also move the RX descriptor related defines from rt2800pci.h into rt2800mmio.h Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-18rt2x00: rt2800pci: use rt2800mmio prefix for RX control handler functionsGabor Juhos1-3/+3
The functions are used for devices with memory mapped I/O and contain no PCI specific code at all. Use rt2800mmio prefix instead of rt2800pci in the function names to reflect that. The patch contains no functional changes. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-18rt2x00: rt2800pci: move TX descriptor functions to the rt2800mmio moduleGabor Juhos5-98/+117
Move the functions into a separate module, in order to make those usable from other modules. Also move the TX descriptor related defines from rt2800pci.h into rt2800mmio.h. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-27 07:07:09 +0300