summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2019-10-09Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds18-147/+154
Pull rdma fixes from Jason Gunthorpe: "The usual collection of driver bug fixes, and a few regressions from the merge window. Nothing particularly worrisome. - Various missed memory frees and error unwind bugs - Fix regressions in a few iwarp drivers from 5.4 patches - A few regressions added in past kernels - Squash a number of races in mlx5 ODP code" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: RDMA/mlx5: Add missing synchronize_srcu() for MW cases RDMA/mlx5: Put live in the correct place for ODP MRs RDMA/mlx5: Order num_pending_prefetch properly with synchronize_srcu RDMA/odp: Lift umem_mutex out of ib_umem_odp_unmap_dma_pages() RDMA/mlx5: Fix a race with mlx5_ib_update_xlt on an implicit MR RDMA/mlx5: Do not allow rereg of a ODP MR IB/core: Fix wrong iterating on ports RDMA/nldev: Reshuffle the code to avoid need to rebind QP in error path RDMA/cxgb4: Do not dma memory off of the stack RDMA/cm: Fix memory leak in cm_add/remove_one RDMA/core: Fix an error handling path in 'res_get_common_doit()' RDMA/i40iw: Associate ibdev to netdev before IB device registration RDMA/iwcm: Fix a lock inversion issue RDMA/iw_cxgb4: fix SRQ access from dump_qp() RDMA/hfi1: Prevent memory leak in sdma_init RDMA/core: Fix use after free and refcnt leak on ndev in_device in iwarp_query_port RDMA/siw: Fix serialization issue in write_space() RDMA/vmw_pvrdma: Free SRQ only once
2019-10-08Merge tag 'gpio-v5.4-2' of ↵Linus Torvalds4-15/+27
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fixes from Linus Walleij: - don't clear FLAG_IS_OUT when emulating open drain/source in gpiolib - fix up the usage of nonexclusive GPIO descriptors from device trees - fix the incorrect IEC offset when toggling trigger edge in the Spreadtrum driver - use the correct unit for debounce settings in the MAX77620 driver * tag 'gpio-v5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: max77620: Use correct unit for debounce times gpio: eic: sprd: Fix the incorrect EIC offset when toggling gpio: fix getting nonexclusive gpiods from DT gpiolib: don't clear FLAG_IS_OUT when emulating open-drain/open-source
2019-10-06Merge tag 'armsoc-fixes' of ↵Linus Torvalds1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Olof Johansson: "A few fixes this time around: - Fixup of some clock specifications for DRA7 (device-tree fix) - Removal of some dead/legacy CPU OPP/PM code for OMAP that throws warnings at boot - A few more minor fixups for OMAPs, most around display - Enable STM32 QSPI as =y since their rootfs sometimes comes from there - Switch CONFIG_REMOTEPROC to =y since it went from tristate to bool - Fix of thermal zone definition for ux500 (5.4 regression)" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: ARM: multi_v7_defconfig: Fix SPI_STM32_QSPI support ARM: dts: ux500: Fix up the CPU thermal zone arm64/ARM: configs: Change CONFIG_REMOTEPROC from m to y ARM: dts: am4372: Set memory bandwidth limit for DISPC ARM: OMAP2+: Fix warnings with broken omap2_set_init_voltage() ARM: OMAP2+: Add missing LCDC midlemode for am335x ARM: OMAP2+: Fix missing reset done flag for am3 and am43 ARM: dts: Fix gpio0 flags for am335x-icev2 ARM: omap2plus_defconfig: Enable more droid4 devices as loadable modules ARM: omap2plus_defconfig: Enable DRM_TI_TFP410 DTS: ARM: gta04: introduce legacy spi-cs-high to make display work again ARM: dts: Fix wrong clocks for dra7 mcasp clk: ti: dra7: Fix mcasp8 clock bits
2019-10-05Merge tag 'kbuild-fixes-v5.4' of ↵Linus Torvalds1-19/+2
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - remove unneeded ar-option and KBUILD_ARFLAGS - remove long-deprecated SUBDIRS - fix modpost to suppress false-positive warnings for UML builds - fix namespace.pl to handle relative paths to ${objtree}, ${srctree} - make setlocalversion work for /bin/sh - make header archive reproducible - fix some Makefiles and documents * tag 'kbuild-fixes-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kheaders: make headers archive reproducible kbuild: update compile-test header list for v5.4-rc2 kbuild: two minor updates for Documentation/kbuild/modules.rst scripts/setlocalversion: clear local variable to make it work for sh namespace: fix namespace.pl script to support relative paths video/logo: do not generate unneeded logo C files video/logo: remove unneeded *.o pattern from clean-files integrity: remove pointless subdir-$(CONFIG_...) integrity: remove unneeded, broken attempt to add -fshort-wchar modpost: fix static EXPORT_SYMBOL warnings for UML build kbuild: correct formatting of header in kbuild module docs kbuild: remove SUBDIRS support kbuild: remove ar-option and KBUILD_ARFLAGS
2019-10-05Merge tag 'scsi-fixes' of ↵Linus Torvalds15-80/+193
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Twelve patches mostly small but obvious fixes or cosmetic but small updates" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: qla2xxx: Fix Nport ID display value scsi: qla2xxx: Fix N2N link up fail scsi: qla2xxx: Fix N2N link reset scsi: qla2xxx: Optimize NPIV tear down process scsi: qla2xxx: Fix stale mem access on driver unload scsi: qla2xxx: Fix unbound sleep in fcport delete path. scsi: qla2xxx: Silence fwdump template message scsi: hisi_sas: Make three functions static scsi: megaraid: disable device when probe failed after enabled device scsi: storvsc: setup 1:1 mapping between hardware queue and CPU queue scsi: qedf: Remove always false 'tmp_prio < 0' statement scsi: ufs: skip shutdown if hba is not powered scsi: bnx2fc: Handle scope bits when array returns BUSY or TSF
2019-10-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds38-148/+268
Pull networking fixes from David Miller: 1) Fix ieeeu02154 atusb driver use-after-free, from Johan Hovold. 2) Need to validate TCA_CBQ_WRROPT netlink attributes, from Eric Dumazet. 3) txq null deref in mac80211, from Miaoqing Pan. 4) ionic driver needs to select NET_DEVLINK, from Arnd Bergmann. 5) Need to disable bh during nft_connlimit GC, from Pablo Neira Ayuso. 6) Avoid division by zero in taprio scheduler, from Vladimir Oltean. 7) Various xgmac fixes in stmmac driver from Jose Abreu. 8) Avoid 64-bit division in mlx5 leading to link errors on 32-bit from Michal Kubecek. 9) Fix bad VLAN check in rtl8366 DSA driver, from Linus Walleij. 10) Fix sleep while atomic in sja1105, from Vladimir Oltean. 11) Suspend/resume deadlock in stmmac, from Thierry Reding. 12) Various UDP GSO fixes from Josh Hunt. 13) Fix slab out of bounds access in tcp_zerocopy_receive(), from Eric Dumazet. 14) Fix OOPS in __ipv6_ifa_notify(), from David Ahern. 15) Memory leak in NFC's llcp_sock_bind, from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (72 commits) selftests/net: add nettest to .gitignore net: qlogic: Fix memory leak in ql_alloc_large_buffers nfc: fix memory leak in llcp_sock_bind() sch_dsmark: fix potential NULL deref in dsmark_init() net: phy: at803x: use operating parameters from PHY-specific status net: phy: extract pause mode net: phy: extract link partner advertisement reading net: phy: fix write to mii-ctrl1000 register ipv6: Handle missing host route in __ipv6_ifa_notify net: phy: allow for reset line to be tied to a sleepy GPIO controller net: ipv4: avoid mixed n_redirects and rate_tokens usage r8152: Set macpassthru in reset_resume callback cxgb4:Fix out-of-bounds MSI-X info array access Revert "ipv6: Handle race in addrconf_dad_work" net: make sock_prot_memory_pressure() return "const char *" rxrpc: Fix rxrpc_recvmsg tracepoint qmi_wwan: add support for Cinterion CLS8 devices tcp: fix slab-out-of-bounds in tcp_zerocopy_receive() lib: textsearch: fix escapes in example code udp: only do GSO if # of segs > 1 ...
2019-10-05Merge tag 's390-5.4-3' of ↵Linus Torvalds2-3/+2
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Vasily Gorbik: - defconfig updates - Fix build errors with CC_OPTIMIZE_FOR_SIZE due to usage of "i" constraint for function arguments. Two kvm changes acked-by Christian Borntraeger. - Fix -Wunused-but-set-variable warnings in mm code. - Avoid a constant misuse in qdio. - Handle a case when cpumf is temporarily unavailable. * tag 's390-5.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: KVM: s390: mark __insn32_query() as __always_inline KVM: s390: fix __insn32_query() inline assembly s390: update defconfigs s390/pci: mark function(s) __always_inline s390/mm: mark function(s) __always_inline s390/jump_label: mark function(s) __always_inline s390/cpu_mf: mark function(s) __always_inline s390/atomic,bitops: mark function(s) __always_inline s390/mm: fix -Wunused-but-set-variable warnings s390: mark __cpacf_query() as __always_inline s390/qdio: clarify size of the QIB parm area s390/cpumf: Fix indentation in sampling device driver s390/cpumsf: Check for CPU Measurement sampling s390/cpumf: Use consistant debug print format
2019-10-05video/logo: do not generate unneeded logo C filesMasahiro Yamada1-19/+2
Currently, all the logo C files are generated irrespective of the CONFIG options. Adding them to extra-y is wrong. What we need to do here is to add them to 'targets' so that if_changed works properly. Files listed in 'targets' are cleaned, so clean-files is unneeded. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-10-05video/logo: remove unneeded *.o pattern from clean-filesMasahiro Yamada1-1/+1
The pattern *.o is cleaned up globally by the top Makefile. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-10-05net: qlogic: Fix memory leak in ql_alloc_large_buffersNavid Emamdoost1-0/+1
In ql_alloc_large_buffers, a new skb is allocated via netdev_alloc_skb. This skb should be released if pci_dma_mapping_error fails. Fixes: 0f8ab89e825f ("qla3xxx: Check return code from pci_map_single() in ql_release_to_lrg_buf_free_list(), ql_populate_free_queue(), ql_alloc_large_buffers(), and ql3xxx_send()") Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-05net: phy: at803x: use operating parameters from PHY-specific statusRussell King1-0/+69
Read the PHY-specific status register for the current operating mode (speed and duplex) of the PHY. This register reflects the actual mode that the PHY has resolved depending on either the advertisements of autoneg is enabled, or the forced mode if autoneg is disabled. This ensures that phylib's software state always tracks the hardware state. It seems both AR8033 (which uses the AR8031 ID) and AR8035 support this status register. AR8030 is not known at the present time. This patch depends on "net: phy: extract pause mode" and "net: phy: extract link partner advertisement reading". Reported-by: tinywrkb <tinywrkb@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Tested-by: tinywrkb <tinywrkb@gmail.com> Fixes: 5502b218e001 ("net: phy: use phy_resolve_aneg_linkmode in genphy_read_status") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-05net: phy: extract pause modeRussell King1-7/+13
Extract the update of phylib's software pause mode state from genphy_read_status(), so that we can re-use this functionality with PHYs that have alternative ways to read the negotiation results. Tested-by: tinywrkb <tinywrkb@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-05net: phy: extract link partner advertisement readingRussell King1-25/+40
Move reading the link partner advertisement out of genphy_read_status() into its own separate function. This will allow re-use of this code by PHY drivers that are able to read the resolved status from the PHY. Tested-by: tinywrkb <tinywrkb@gmail.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-05net: phy: fix write to mii-ctrl1000 registerRussell King1-0/+5
When userspace writes to the MII_ADVERTISE register, we update phylib's advertising mask and trigger a renegotiation. However, writing to the MII_CTRL1000 register, which contains the gigabit advertisement, does neither. This can lead to phylib's copy of the advertisement becoming de-synced with the values in the PHY register set, which can result in incorrect negotiation resolution. Fixes: 5502b218e001 ("net: phy: use phy_resolve_aneg_linkmode in genphy_read_status") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-05net: phy: allow for reset line to be tied to a sleepy GPIO controllerAndrea Merello1-1/+1
mdio_device_reset() makes use of the atomic-pretending API flavor for handling the PHY reset GPIO line. I found no hint that mdio_device_reset() is called from atomic context and indeed it uses usleep_range() since long time, so I would assume that it is OK to sleep there. This patch switch to gpiod_set_value_cansleep() in mdio_device_reset(). This is relevant if e.g. the PHY reset line is tied to a I2C GPIO controller. This has been tested on a ZynqMP board running an upstream 4.19 kernel and then hand-ported on current kernel tree. Signed-off-by: Andrea Merello <andrea.merello@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-05r8152: Set macpassthru in reset_resume callbackKai-Heng Feng1-2/+1
r8152 may fail to establish network connection after resume from system suspend. If the USB port connects to r8152 lost its power during system suspend, the MAC address was written before is lost. The reason is that The MAC address doesn't get written again in its reset_resume callback. So let's set MAC address again in reset_resume callback. Also remove unnecessary lock as no other locking attempt will happen during reset_resume. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-05gpio: max77620: Use correct unit for debounce timesThierry Reding1-3/+3
The gpiod_set_debounce() function takes the debounce time in microseconds. Adjust the switch/case values in the MAX77620 GPIO to use the correct unit. Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20191002122825.3948322-1-thierry.reding@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-10-05cxgb4:Fix out-of-bounds MSI-X info array accessVishal Kulkarni1-3/+6
When fetching free MSI-X vectors for ULDs, check for the error code before accessing MSI-X info array. Otherwise, an out-of-bounds access is attempted, which results in kernel panic. Fixes: 94cdb8bb993a ("cxgb4: Add support for dynamic allocation of resources for ULD") Signed-off-by: Shahjada Abul Husain <shahjada@chelsio.com> Signed-off-by: Vishal Kulkarni <vishal@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04qmi_wwan: add support for Cinterion CLS8 devicesReinhard Speyerer1-0/+1
Add support for Cinterion CLS8 devices. Use QMI_QUIRK_SET_DTR as required for Qualcomm MDM9x07 chipsets. T: Bus=01 Lev=03 Prnt=05 Port=01 Cnt=02 Dev#= 25 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1e2d ProdID=00b0 Rev= 3.18 S: Manufacturer=GEMALTO S: Product=USB Modem C:* #Ifs= 5 Cfg#= 1 Atr=80 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Reinhard Speyerer <rspmn@arcor.de> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04RDMA/mlx5: Add missing synchronize_srcu() for MW casesJason Gunthorpe4-55/+33
While MR uses live as the SRCU 'update', the MW case uses the xarray directly, xa_erase() causes the MW to become inaccessible to the pagefault thread. Thus whenever a MW is removed from the xarray we must synchronize_srcu() before freeing it. This must be done before freeing the mkey as re-use of the mkey while the pagefault thread is using the stale mkey is undesirable. Add the missing synchronizes to MW and DEVX indirect mkey and delete the bogus protection against double destroy in mlx5_core_destroy_mkey() Fixes: 534fd7aac56a ("IB/mlx5: Manage indirection mkey upon DEVX flow for ODP") Fixes: 6aec21f6a832 ("IB/mlx5: Page faults handling infrastructure") Link: https://lore.kernel.org/r/20191001153821.23621-7-jgg@ziepe.ca Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-04RDMA/mlx5: Put live in the correct place for ODP MRsJason Gunthorpe3-38/+14
live is used to signal to the pagefault thread that the MR is initialized and ready for use. It should be after the umem is assigned and all other setup is completed. This prevents races (at least) of the form: CPU0 CPU1 mlx5_ib_alloc_implicit_mr() implicit_mr_alloc() live = 1 imr->umem = umem num_pending_prefetch_inc() if (live) atomic_inc(num_pending_prefetch) atomic_set(num_pending_prefetch,0) // Overwrites other thread's store Further, live is being used with SRCU as the 'update' in an acquire/release fashion, so it can not be read and written raw. Move all live = 1's to after MR initialization is completed and use smp_store_release/smp_load_acquire() for manipulating it. Add a missing live = 0 when an implicit MR child is deleted, before queuing work to do synchronize_srcu(). The barriers in update_odp_mr() were some broken attempt to create a acquire/release, but were not even applied consistently and missed the point, delete it as well. Fixes: 6aec21f6a832 ("IB/mlx5: Page faults handling infrastructure") Link: https://lore.kernel.org/r/20191001153821.23621-6-jgg@ziepe.ca Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-04RDMA/mlx5: Order num_pending_prefetch properly with synchronize_srcuJason Gunthorpe1-2/+3
During destroy setting live = 0 and then synchronize_srcu() prevents num_pending_prefetch from incrementing, and also, ensures that all work holding that count is queued on the WQ. Testing before causes races of the form: CPU0 CPU1 dereg_mr() mlx5_ib_advise_mr_prefetch() srcu_read_lock() num_pending_prefetch_inc() if (!live) live = 0 atomic_read() == 0 // skip flush_workqueue() atomic_inc() queue_work(); srcu_read_unlock() WARN_ON(atomic_read()) // Fails Swap the order so that the synchronize_srcu() prevents this. Fixes: a6bc3875f176 ("IB/mlx5: Protect against prefetch of invalid MR") Link: https://lore.kernel.org/r/20191001153821.23621-5-jgg@ziepe.ca Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-04RDMA/odp: Lift umem_mutex out of ib_umem_odp_unmap_dma_pages()Jason Gunthorpe2-6/+12
This fixes a race of the form: CPU0 CPU1 mlx5_ib_invalidate_range() mlx5_ib_invalidate_range() // This one actually makes npages == 0 ib_umem_odp_unmap_dma_pages() if (npages == 0 && !dying) // This one does nothing ib_umem_odp_unmap_dma_pages() if (npages == 0 && !dying) dying = 1; dying = 1; schedule_work(&umem_odp->work); // Double schedule of the same work schedule_work(&umem_odp->work); // BOOM npages and dying must be read and written under the umem_mutex lock. Since whenever ib_umem_odp_unmap_dma_pages() is called mlx5 must also call mlx5_ib_update_xlt, and both need to be done in the same locking region, hoist the lock out of unmap. This avoids an expensive double critical section in mlx5_ib_invalidate_range(). Fixes: 81713d3788d2 ("IB/mlx5: Add implicit MR support") Link: https://lore.kernel.org/r/20191001153821.23621-4-jgg@ziepe.ca Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-04RDMA/mlx5: Fix a race with mlx5_ib_update_xlt on an implicit MRJason Gunthorpe1-2/+32
mlx5_ib_update_xlt() must be protected against parallel free of the MR it is accessing, also it must be called single threaded while updating the HW. Otherwise we can have races of the form: CPU0 CPU1 mlx5_ib_update_xlt() mlx5_odp_populate_klm() odp_lookup() == NULL pklm = ZAP implicit_mr_get_data() implicit_mr_alloc() <update interval tree> mlx5_ib_update_xlt mlx5_odp_populate_klm() odp_lookup() != NULL pklm = VALID mlx5_ib_post_send_wait() mlx5_ib_post_send_wait() // Replaces VALID with ZAP This can be solved by putting both the SRCU and the umem_mutex lock around every call to mlx5_ib_update_xlt(). This ensures that the content of the interval tree relavent to mlx5_odp_populate_klm() (ie mr->parent == mr) will not change while it is running, and thus the posted WRs to update the KLM will always reflect the correct information. The race above will resolve by either having CPU1 wait till CPU0 completes the ZAP or CPU0 will run after the add and instead store VALID. The pagefault path adding children already holds the umem_mutex and SRCU, so the only missed lock is during MR destruction. Fixes: 81713d3788d2 ("IB/mlx5: Add implicit MR support") Link: https://lore.kernel.org/r/20191001153821.23621-3-jgg@ziepe.ca Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-04RDMA/mlx5: Do not allow rereg of a ODP MRJason Gunthorpe1-3/+3
This code is completely broken, the umem of a ODP MR simply cannot be discarded without a lot more locking, nor can an ODP mkey be blithely destroyed via destroy_mkey(). Fixes: 6aec21f6a832 ("IB/mlx5: Page faults handling infrastructure") Link: https://lore.kernel.org/r/20191001153821.23621-2-jgg@ziepe.ca Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-04IB/core: Fix wrong iterating on portsMohamad Heib1-1/+1
rdma_for_each_port is already incrementing the iterator's value it receives therefore, after the first iteration the iterator is increased by 2 which eventually causing wrong queries and possible traces. Fix the above by removing the old redundant incrementation that was used before rdma_for_each_port() macro. Cc: <stable@vger.kernel.org> Fixes: ea1075edcbab ("RDMA: Add and use rdma_for_each_port") Link: https://lore.kernel.org/r/20191002122127.17571-1-leon@kernel.org Signed-off-by: Mohamad Heib <mohamadh@mellanox.com> Reviewed-by: Erez Alfasi <ereza@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-04RDMA/nldev: Reshuffle the code to avoid need to rebind QP in error pathLeon Romanovsky1-6/+4
Properly unwind QP counter rebinding in case of failure. Trying to rebind the counter after unbiding it is not going to work reliably, move the unbind to the end so it doesn't have to be unwound. Fixes: b389327df905 ("RDMA/nldev: Allow counter manual mode configration through RDMA netlink") Link: https://lore.kernel.org/r/20191002115627.16740-1-leon@kernel.org Reviewed-by: Mark Zhang <markz@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-04RDMA/cxgb4: Do not dma memory off of the stackGreg KH1-11/+17
Nicolas pointed out that the cxgb4 driver is doing dma off of the stack, which is generally considered a very bad thing. On some architectures it could be a security problem, but odds are none of them actually run this driver, so it's just a "normal" bug. Resolve this by allocating the memory for a message off of the heap instead of the stack. kmalloc() always will give us a proper memory location that DMA will work correctly from. Link: https://lore.kernel.org/r/20191001165611.GA3542072@kroah.com Reported-by: Nicolas Waisman <nico@semmle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Tested-by: Potnuri Bharat Teja <bharat@chelsio.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-04Merge tag 'for-linus-5.4-rc2-tag' of ↵Linus Torvalds3-56/+72
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes and cleanups from Juergen Gross: - a fix in the Xen balloon driver avoiding hitting a BUG_ON() in some cases, plus a follow-on cleanup series for that driver - a patch for introducing non-blocking EFI callbacks in Xen's EFI driver, plu a cleanup patch for Xen EFI handling merging the x86 and ARM arch specific initialization into the Xen EFI driver - a fix of the Xen xenbus driver avoiding a self-deadlock when cleaning up after a user process has died - a fix for Xen on ARM after removal of ZONE_DMA - a cleanup patch for avoiding build warnings for Xen on ARM * tag 'for-linus-5.4-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/xenbus: fix self-deadlock after killing user process xen/efi: have a common runtime setup function arm: xen: mm: use __GPF_DMA32 for arm64 xen/balloon: Clear PG_offline in balloon_retrieve() xen/balloon: Mark pages PG_offline in balloon_append() xen/balloon: Drop __balloon_append() xen/balloon: Set pages PageOffline() in balloon_add_region() ARM: xen: unexport HYPERVISOR_platform_op function xen/efi: Set nonblocking callbacks
2019-10-04RDMA/cm: Fix memory leak in cm_add/remove_oneJack Morgenstein1-0/+3
In the process of moving the debug counters sysfs entries, the commit mentioned below eliminated the cm_infiniband sysfs directory. This sysfs directory was tied to the cm_port object allocated in procedure cm_add_one(). Before the commit below, this cm_port object was freed via a call to kobject_put(port->kobj) in procedure cm_remove_port_fs(). Since port no longer uses its kobj, kobject_put(port->kobj) was eliminated. This, however, meant that kfree was never called for the cm_port buffers. Fix this by adding explicit kfree(port) calls to functions cm_add_one() and cm_remove_one(). Note: the kfree call in the first chunk below (in the cm_add_one error flow) fixes an old, undetected memory leak. Fixes: c87e65cfb97c ("RDMA/cm: Move debug counters to be under relevant IB device") Link: https://lore.kernel.org/r/20190916071154.20383-2-leon@kernel.org Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-04RDMA/core: Fix an error handling path in 'res_get_common_doit()'Christophe JAILLET1-1/+1
According to surrounding error paths, it is likely that 'goto err_get;' is expected here. Otherwise, a call to 'rdma_restrack_put(res);' would be missing. Fixes: c5dfe0ea6ffa ("RDMA/nldev: Add resource tracker doit callback") Link: https://lore.kernel.org/r/20190818091044.8845-1-christophe.jaillet@wanadoo.fr Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-04RDMA/i40iw: Associate ibdev to netdev before IB device registrationShiraz, Saleem1-0/+4
i40iw IB device registration fails with ENODEV. ib_register_device setup_device/setup_port_data i40iw_port_immutable ib_query_port iw_query_port ib_device_get_netdev(ENODEV) ib_device_get_netdev() does not have a netdev associated with the ibdev and thus fails. Use ib_device_set_netdev() to associate netdev to ibdev in i40iw before IB device registration. Fixes: 4929116bdf72 ("RDMA/core: Add common iWARP query port") Link: https://lore.kernel.org/r/20190925164524.856-1-shiraz.saleem@intel.com Signed-off-by: Shiraz, Saleem <shiraz.saleem@intel.com> Reviewed-by: Kamal Heib <kamalheib1@gmail.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-04Merge tag 'drm-fixes-2019-10-04' of git://anongit.freedesktop.org/drm/drmLinus Torvalds38-159/+230
Pull drm fixes from Dave Airlie: "Been offline for 3 days, got back and had some fixes queued up. Nothing too major, the i915 dp-mst fix is important, and amdgpu has a bulk move speedup fix and some regressions, but nothing too insane for an rc2 pull. The intel fixes are also 2 weeks worth, they missed the boat last week. core: - writeback fixes i915: - Fix DP-MST crtc_mask - Fix dsc dpp calculations - Fix g4x sprite scaling stride check with GTT remapping - Fix concurrence on cases where requests where getting retired at same time as resubmitted to HW - Fix gen9 display resolutions by setting the right max plane width - Fix GPU hang on preemption - Mark contents as dirty on a write fault. This was breaking cursor sprite with dumb buffers. komeda: - memory leak fix tilcdc: - include fix amdgpu: - Enable bulk moves - Power metrics fixes for Navi - Fix S4 regression - Add query for tcc disabled mask - Fix several leaks in error paths - randconfig fixes - clang fixes" * tag 'drm-fixes-2019-10-04' of git://anongit.freedesktop.org/drm/drm: (21 commits) Revert "drm/i915: Fix DP-MST crtc_mask" drm/omap: fix max fclk divider for omap36xx drm/i915: Fix g4x sprite scaling stride check with GTT remapping drm/i915/dp: Fix dsc bpp calculations, v5. drm/amd/display: fix dcn21 Makefile for clang drm/amd/display: hide an unused variable drm/amdgpu: display_mode_vba_21: remove uint typedef drm/amdgpu: hide another #warning drm/amdgpu: make pmu support optional, again drm/amd/display: memory leak drm/amdgpu: fix multiple memory leaks in acp_hw_init drm/amdgpu: return tcc_disabled_mask to userspace drm/amdgpu: don't increment vram lost if we are in hibernation Revert "drm/amdgpu: disable stutter mode for renoir" drm/amd/powerplay: add sensor lock support for smu drm/amd/powerplay: change metrics update period from 1ms to 100ms drm/amdgpu: revert "disable bulk moves for now" drm/tilcdc: include linux/pinctrl/consumer.h again drm/komeda: prevent memory leak in komeda_wb_connector_add drm: Clear the fence pointer when writeback job signaled ...
2019-10-04Merge tag 'for-linus-2019-10-03' of git://git.kernel.dk/linux-blockLinus Torvalds9-121/+175
Pull block fixes from Jens Axboe: - Mandate timespec64 for the io_uring timeout ABI (Arnd) - Set of NVMe changes via Sagi: - controller removal race fix from Balbir - quirk additions from Gabriel and Jian-Hong - nvme-pci power state save fix from Mario - Add 64bit user commands (for 64bit registers) from Marta - nvme-rdma/nvme-tcp fixes from Max, Mark and Me - Minor cleanups and nits from James, Dan and John - Two s390 dasd fixes (Jan, Stefan) - Have loop change block size in DIO mode (Martijn) - paride pg header ifdef guard (Masahiro) - Two blk-mq queue scheduler tweaks, fixing an ordering issue on zoned devices and suboptimal performance on others (Ming) * tag 'for-linus-2019-10-03' of git://git.kernel.dk/linux-block: (22 commits) block: sed-opal: fix sparse warning: convert __be64 data block: sed-opal: fix sparse warning: obsolete array init. block: pg: add header include guard Revert "s390/dasd: Add discard support for ESE volumes" s390/dasd: Fix error handling during online processing io_uring: use __kernel_timespec in timeout ABI loop: change queue block size to match when using DIO blk-mq: apply normal plugging for HDD blk-mq: honor IO scheduler for multiqueue devices nvme-rdma: fix possible use-after-free in connect timeout nvme: Move ctrl sqsize to generic space nvme: Add ctrl attributes for queue_count and sqsize nvme: allow 64-bit results in passthru commands nvme: Add quirk for Kingston NVME SSD running FW E8FK11.T nvmet-tcp: remove superflous check on request sgl Added QUIRKs for ADATA XPG SX8200 Pro 512GB nvme-rdma: Fix max_hw_sectors calculation nvme: fix an error code in nvme_init_subsystem() nvme-pci: Save PCI state before putting drive into deepest state nvme-tcp: fix wrong stop condition in io_work ...
2019-10-04Merge tag 'drm-intel-fixes-2019-10-03-1' of ↵Dave Airlie6-102/+111
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Fix DP-MST crtc_mask - Fix dsc dpp calculations - Fix g4x sprite scaling stride check with GTT remapping Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191003193051.GA26421@intel.com
2019-10-04Merge tag 'drm-misc-fixes-2019-10-03' of ↵Dave Airlie8-23/+36
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes - One include fix for tilcdc - A clock fix for OMAP - A memory leak fix for Komeda - Some fixes for resources cleanups with writeback Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191003081031.oykms5fg4tijvdri@gilmour
2019-10-03Revert "drm/i915: Fix DP-MST crtc_mask"Ville Syrjälä1-1/+1
This reverts commit 4eaceea3a00f8e936a7f48dcd0c975a57f88930f. Several userspace clients (modesetting ddx and mutter+wayland at least) handle encoder.possible_crtcs incorrectly. What they essentially do is the following: possible_crtcs = ~0; for_each_possible_encoder(connector) possible_crtcs &= encoder->possible_crtcs; Ie. they calculate the intersection of the possible_crtcs for the connector when they really should be calculating the union instead. In our case each MST encoder now has just one unique bit set, and so the intersection is always zero. The end result is that MST connectors can't be lit up because no crtc can be found to drive them. I've submitted a fix for the modesetting ddx [1], and complained on #wayland about mutter, so hopefully the situation will improve in the future. In the meantime we have regression, and so must go back to the old way of misconfiguring possible_crtcs in the kernel. [1] https://gitlab.freedesktop.org/xorg/xserver/merge_requests/277 Cc: Jonas Ådahl <jadahl@gmail.com> Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111507 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190903154018.26357-1-ville.syrjala@linux.intel.com Reviewed-by: José Roberto de Souza <jose.souza@intel.com> (cherry picked from commit e838bfa8e170415fa3cc8e83ecb171e809c0c422) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2019-10-03Merge tag 'omap-for-v5.4/fixes-rc1-signed' of ↵Olof Johansson1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Fixes for omaps for v5.4-rc cycle Here are fixes for omaps to deal with few regressions, and to fix more boot time errors and warnings: - The recent ti-sysc interconnect target module driver changes had incorrect clock bits for both clocks and dts that cause warnings - For omap3-gta04, gpio changes caused the LCD to break a while back, and after discussing things the right fix is to set spi-cs-high - Recent omapdrm changes to use generic panels caused tfp410 to be disabled as we now must enable the generic support for it in defconfig - Recent omapdrm and backlight changes also finally made droid4 LCD to work, so let's enable it in the defconfig it can be used out of the box. This is not strictly a fix, but we still also have the older CONFIG_MFD_TI_LMU options available so this cuts down the confusion for trying to guess which display and which backlight is needed - Recent ti-sysc interconnect target module changes need the gpio module disabled on some boards, but this now needs to happen at the module level, not at the gpio driver level - Recent changes to probe system timers with ti-sysc caused warnings about mismatch in syconfig registers, so let's configure the option for RESET_STATUS as available in the TRMs - Recent changes to probe LCDC with ti-sysc caused warnings about mismatch in sysconfig registers, so let's configure the missing idlemodes for both platform data and dts as documented in TRMs - Since we moved mach-omap2 to probe with device tree, we've been getting voltage controller warnings. Turns out this code is no longer needed, so let's just remove omap2_set_init_voltage() to get rid of the pointless warnings - Configure am4372 dispc memory bandwidth to avoid underflow errors * tag 'omap-for-v5.4/fixes-rc1-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: am4372: Set memory bandwidth limit for DISPC ARM: OMAP2+: Fix warnings with broken omap2_set_init_voltage() ARM: OMAP2+: Add missing LCDC midlemode for am335x ARM: OMAP2+: Fix missing reset done flag for am3 and am43 ARM: dts: Fix gpio0 flags for am335x-icev2 ARM: omap2plus_defconfig: Enable more droid4 devices as loadable modules ARM: omap2plus_defconfig: Enable DRM_TI_TFP410 DTS: ARM: gta04: introduce legacy spi-cs-high to make display work again ARM: dts: Fix wrong clocks for dra7 mcasp clk: ti: dra7: Fix mcasp8 clock bits Link: https://lore.kernel.org/r/pull-1570040410-308159@atomide.com Signed-off-by: Olof Johansson <olof@lixom.net>
2019-10-03Merge drm-misc-next-fixes-2019-10-02 into drm-misc-fixesMaxime Ripard1-0/+1
One tilcdc fix was left out in drm-misc-next-fixes and didn't make it during the merge window. Let's bring it into drm-misc-fixes. Signed-off-by: Maxime Ripard <mripard@kernel.org>
2019-10-03Merge drm/drm-fixes into drm-misc-fixesMaxime Ripard6076-174255/+495443
We haven't backmerged for a while, let's start the -rc period by pulling rc1. Signed-off-by: Maxime Ripard <mripard@kernel.org>
2019-10-03drm/omap: fix max fclk divider for omap36xxTomi Valkeinen1-1/+1
The OMAP36xx and AM/DM37x TRMs say that the maximum divider for DSS fclk (in CM_CLKSEL_DSS) is 32. Experimentation shows that this is not correct, and using divider of 32 breaks DSS with a flood or underflows and sync losts. Dividers up to 31 seem to work fine. There is another patch to the DT files to limit the divider correctly, but as the DSS driver also needs to know the maximum divider to be able to iteratively find good rates, we also need to do the fix in the DSS driver. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Adam Ford <aford173@gmail.com> Cc: stable@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20191002122542.8449-1-tomi.valkeinen@ti.com Tested-by: Adam Ford <aford173@gmail.com> Reviewed-by: Jyri Sarha <jsarha@ti.com>
2019-10-03drm/i915: Fix g4x sprite scaling stride check with GTT remappingVille Syrjälä1-2/+3
I forgot to update the g4x sprite scaling stride check when GTT remapping was introduced. The stride of the original framebuffer is irrelevant when remapping is used and instead we want to check the stride of the remapped view. Also drop the duplicate width_bytes check. We already check that a few lines earlier. Fixes: df79cf441910 ("drm/i915: Store the final plane stride in plane_state") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190930183045.662-1-ville.syrjala@linux.intel.com Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (cherry picked from commit 006e570128f413759b9df64b51bae79903679c9b) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2019-10-03drm/i915/dp: Fix dsc bpp calculations, v5.Maarten Lankhorst5-99/+107
There was a integer wraparound when mode_clock became too high, and we didn't correct for the FEC overhead factor when dividing, with the calculations breaking at HBR3. As a result our calculated bpp was way too high, and the link width limitation never came into effect. Print out the resulting bpp calcululations as a sanity check, just in case we ever have to debug it later on again. We also used the wrong factor for FEC. While bspec mentions 2.4%, all the calculations use 1/0.972261, and the same ratio should be applied to data M/N as well, so use it there when FEC is enabled. This fixes the FIFO underrun we are seeing with FEC enabled. Changes since v2: - Handle fec_enable in intel_link_compute_m_n, so only data M/N is adjusted. (Ville) - Fix initial hardware readout for FEC. (Ville) Changes since v3: - Remove bogus fec_to_mode_clock. (Ville) Changes since v4: - Use the correct register for icl. (Ville) - Split hw readout to a separate patch. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Fixes: d9218c8f6cf4 ("drm/i915/dp: Add helpers for Compressed BPP and Slice Count for DSC") Cc: <stable@vger.kernel.org> # v5.0+ Cc: Manasi Navare <manasi.d.navare@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190925082110.17439-1-maarten.lankhorst@linux.intel.com Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> (cherry picked from commit ed06efb801bd291e935238d3fba46fa03d098f0e) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2019-10-03net: stmmac: Avoid deadlock on suspend/resumeThierry Reding1-4/+6
The stmmac driver will try to acquire its private mutex during suspend via phylink_resolve() -> stmmac_mac_link_down() -> stmmac_eee_init(). However, the phylink configuration is updated with the private mutex held already, which causes a deadlock during suspend. Fix this by moving the phylink configuration updates out of the region of code protected by the private mutex. Fixes: 19e13cb27b99 ("net: stmmac: Hold rtnl lock in suspend/resume callbacks") Suggested-by: Bitan Biswas <bbiswas@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-03timer-of: don't use conditional expression with mixed 'void' typesLinus Torvalds1-1/+3
Randy Dunlap reports on the sparse list that sparse warns about this expression: of_irq->percpu ? free_percpu_irq(of_irq->irq, clkevt) : free_irq(of_irq->irq, clkevt); and honestly, sparse is correct to warn. The return type of free_percpu_irq() is 'void', while free_irq() returns a 'const void *' that is the devname argument passed in to the request_irq(). You can't mix a void type with a non-void types in a conditional expression according to the C standard. It so happens that gcc seems to accept it - and the resulting type of the expression is void - but there's really no reason for the kernel to have this kind of non-standard expression with no real upside. The natural way to write that expression is with an if-statement: if (of_irq->percpu) free_percpu_irq(of_irq->irq, clkevt); else free_irq(of_irq->irq, clkevt); which is more legible anyway. I'm not sure why that timer-of code seems to have this odd pattern. It does the same at allocation time, but at least there the types match, and it makes sense as an expression. Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-10-03net: hisilicon: Fix usage of uninitialized variable in function ↵Yizhuo1-1/+5
mdio_sc_cfg_reg_write() In function mdio_sc_cfg_reg_write(), variable "reg_value" could be uninitialized if regmap_read() fails. However, "reg_value" is used to decide the control flow later in the if statement, which is potentially unsafe. Signed-off-by: Yizhuo <yzhai003@ucr.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-02char/random: Add a newline at the end of the fileBorislav Petkov1-1/+1
On Tue, Oct 01, 2019 at 10:14:40AM -0700, Linus Torvalds wrote: > The previous state of the file didn't have that 0xa at the end, so you get that > > > -EXPORT_SYMBOL_GPL(add_bootloader_randomness); > \ No newline at end of file > +EXPORT_SYMBOL_GPL(add_bootloader_randomness); > > which is "the '-' line doesn't have a newline, the '+' line does" marker. Aaha, that makes total sense, thanks for explaining. Oh well, let's fix it then so that people don't scratch heads like me. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-10-02xen/xenbus: fix self-deadlock after killing user processJuergen Gross1-2/+18
In case a user process using xenbus has open transactions and is killed e.g. via ctrl-C the following cleanup of the allocated resources might result in a deadlock due to trying to end a transaction in the xenbus worker thread: [ 2551.474706] INFO: task xenbus:37 blocked for more than 120 seconds. [ 2551.492215] Tainted: P OE 5.0.0-29-generic #5 [ 2551.510263] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 2551.528585] xenbus D 0 37 2 0x80000080 [ 2551.528590] Call Trace: [ 2551.528603] __schedule+0x2c0/0x870 [ 2551.528606] ? _cond_resched+0x19/0x40 [ 2551.528632] schedule+0x2c/0x70 [ 2551.528637] xs_talkv+0x1ec/0x2b0 [ 2551.528642] ? wait_woken+0x80/0x80 [ 2551.528645] xs_single+0x53/0x80 [ 2551.528648] xenbus_transaction_end+0x3b/0x70 [ 2551.528651] xenbus_file_free+0x5a/0x160 [ 2551.528654] xenbus_dev_queue_reply+0xc4/0x220 [ 2551.528657] xenbus_thread+0x7de/0x880 [ 2551.528660] ? wait_woken+0x80/0x80 [ 2551.528665] kthread+0x121/0x140 [ 2551.528667] ? xb_read+0x1d0/0x1d0 [ 2551.528670] ? kthread_park+0x90/0x90 [ 2551.528673] ret_from_fork+0x35/0x40 Fix this by doing the cleanup via a workqueue instead. Reported-by: James Dingwall <james@dingwall.me.uk> Fixes: fd8aa9095a95c ("xen: optimize xenbus driver for multiple concurrent xenstore accesses") Cc: <stable@vger.kernel.org> # 4.11 Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2019-10-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller6-14/+12
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Remove the skb_ext_del from nf_reset, and renames it to a more fitting nf_reset_ct(). Patch from Florian Westphal. 2) Fix deadlock in nft_connlimit between packet path updates and the garbage collector. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-02drm/amd/display: fix dcn21 Makefile for clangArnd Bergmann1-1/+11
Just like all the other variants, this one passes invalid compile-time options with clang after the new code got merged: clang: error: unknown argument: '-mpreferred-stack-boundary=4' scripts/Makefile.build:265: recipe for target 'drivers/gpu/drm/amd/amdgpu/../display/dc/dcn21/dcn21_resource.o' failed Use the same variant that we have for dcn20 to fix compilation. Fixes: eced51f9babb ("drm/amd/display: Add hubp block for Renoir (v2)") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-19 13:12:52 +0300