summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2021-06-26mailbox: qcom-apcs: Add SM6125 compatibleMartin Botka1-0/+5
This commit adds compatible for the SM6125 SoC Signed-off-by: Martin Botka <martin.botka@somainline.org> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2021-06-26mailbox: mtk-cmdq: Fix uninitialized variable in cmdq_mbox_flush()Dan Carpenter1-1/+1
The "cb" pointer needs to be initialized before can assign "data.data = cb->data;". Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Chun-Kuang Hu <chunkuang.hu@kernel.org> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2021-06-26mailbox: bcm-flexrm-mailbox: Remove redundant dev_err call in ↵Zhihao Cheng1-1/+0
flexrm_mbox_probe() There is a error message within devm_ioremap_resource already, so remove the dev_err call to avoid redundant error message. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2021-06-26mailbox: bcm2835: Remove redundant dev_err call in bcm2835_mbox_probe()Zhihao Cheng1-1/+0
There is a error message within devm_ioremap_resource already, so remove the dev_err call to avoid redundant error message. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2021-06-26mailbox: qcom-ipcc: Fix IPCC mbox channel exhaustionSibi Sankar1-0/+6
Fix IPCC (Inter-Processor Communication Controller) channel exhaustion by setting the channel private data to NULL on mbox shutdown. Err Logs: remoteproc: MBA booted without debug policy, loading mpss remoteproc: glink-edge: failed to acquire IPC channel remoteproc: failed to probe subdevices for remoteproc: -16 Fixes: fa74a0257f45 ("mailbox: Add support for Qualcomm IPCC") Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Cc: stable@vger.kernel.org Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2021-06-26mailbox: mtk-cmdq: Add struct cmdq_pkt in struct cmdq_cb_dataChun-Kuang Hu1-0/+2
Current client use 'struct cmdq_pkt' as callback data, so change 'void *data' to 'struct cmdq_pkt *pkt'. Keep data until client use pkt instead of data. Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org> Reviewed-by: Yongqiang Niu <yongqiang.niu@mediatek.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2021-06-26mailbox: mtk-cmdq: Use mailbox rx_callbackChun-Kuang Hu1-5/+9
rx_callback is a standard mailbox callback mechanism and could cover the function of proprietary cmdq_task_cb, so use the standard one instead of the proprietary one. But the client driver has already used cmdq_task_cb, so keep cmdq_task_cb until all client driver use rx_callback instead of cmdq_task_cb. Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org> Reviewed-by: Yongqiang Niu <yongqiang.niu@mediatek.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2021-06-26mailbox: mtk-cmdq: Remove cmdq_cb_statusChun-Kuang Hu1-5/+5
cmdq_cb_status is an error status. Use the standard error number instead of cmdq_cb_status to prevent status duplication. Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org> Reviewed-by: Yongqiang Niu <yongqiang.niu@mediatek.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2021-06-26mailbox: imx-mailbox: support i.MX8ULP MUPeng Fan1-41/+63
i.MX8ULP MU has different register layout and bit layout compared with i.MX6SX/7ULP/8. So add enum imx_mu_type to show it is IMX_MU_V2 or IMX_MU_V1. For IMX_MU_V2 mu hardware, check it when calculating bit offset to get the correct offset. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2021-06-26mailbox: imx: add xSR/xCR register arrayPeng Fan1-35/+61
We are going to add a new platform which has 4 status registers(SR, TSR, RSR, GSR) and 4 control registers(CR, TCR, RCR, GCR), so extend xSR and xCR to register array and adapt code to use it. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2021-06-26mailbox: imx: replace the xTR/xRR array with single registerPeng Fan1-14/+14
The xTR/xRR registers are using 4 bytes stride and continuous. Considering we will support more TR and RR registers, use base + idx * 4 method to calculate register address, not hardcoding in driver. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2021-06-26mailbox: hisilicon: Use the correct HiSilicon copyrightHao Fang2-2/+2
s/Hisilicon/HiSilicon/. It should use capital S, according to https://www.hisilicon.com/en. Signed-off-by: Hao Fang <fanghao11@huawei.com> Reviewed-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2021-06-26mailbox: mediatek: Remove redundant error printing in cmdq_probe()Zhen Lei1-3/+1
When devm_ioremap_resource() fails, a clear enough error message will be printed by its subfunction __devm_ioremap_resource(). The error information contains the device name, failure cause, and possibly resource information. Therefore, remove the error printing here to simplify code and reduce the binary size. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2021-06-26mailbox: bcm-pdc: Remove redundant error printing in pdc_probe()Zhen Lei1-1/+0
When devm_ioremap_resource() fails, a clear enough error message will be printed by its subfunction __devm_ioremap_resource(). The error information contains the device name, failure cause, and possibly resource information. Therefore, remove the error printing here to simplify code and reduce the binary size. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2021-06-26mailbox: arm_mhu: Remove redundant error printing in mhu_probe()Zhen Lei1-3/+1
When devm_ioremap_resource() fails, a clear enough error message will be printed by its subfunction __devm_ioremap_resource(). The error information contains the device name, failure cause, and possibly resource information. Therefore, remove the error printing here to simplify code and reduce the binary size. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2021-06-20Merge tag 'irq_urgent_for_v5.13_rc6' of ↵Linus Torvalds1-1/+35
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fix from Borislav Petkov: "A single fix for GICv3 to not take an interrupt in an NMI context" * tag 'irq_urgent_for_v5.13_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/gic-v3: Workaround inconsistent PMR setting on NMI entry
2021-06-19Merge tag 's390-5.13-4' of ↵Linus Torvalds1-2/+9
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Vasily Gorbik: - Fix zcrypt ioctl hang due to AP queue msg counter dropping below 0 when pending requests are purged. - Two fixes for the machine check handler in the entry code. * tag 's390-5.13-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/ap: Fix hanging ioctl caused by wrong msg counter s390/mcck: fix invalid KVM guest condition check s390/mcck: fix calculation of SIE critical section size
2021-06-19Merge tag 'net-5.13-rc7' of ↵Linus Torvalds63-208/+396
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Networking fixes for 5.13-rc7, including fixes from wireless, bpf, bluetooth, netfilter and can. Current release - regressions: - mlxsw: spectrum_qdisc: Pass handle, not band number to find_class() to fix modifying offloaded qdiscs - lantiq: net: fix duplicated skb in rx descriptor ring - rtnetlink: fix regression in bridge VLAN configuration, empty info is not an error, bot-generated "fix" was not needed - libbpf: s/rx/tx/ typo on umem->rx_ring_setup_done to fix umem creation Current release - new code bugs: - ethtool: fix NULL pointer dereference during module EEPROM dump via the new netlink API - mlx5e: don't update netdev RQs with PTP-RQ, the special purpose queue should not be visible to the stack - mlx5e: select special PTP queue only for SKBTX_HW_TSTAMP skbs - mlx5e: verify dev is present in get devlink port ndo, avoid a panic Previous releases - regressions: - neighbour: allow NUD_NOARP entries to be force GCed - further fixes for fallout from reorg of WiFi locking (staging: rtl8723bs, mac80211, cfg80211) - skbuff: fix incorrect msg_zerocopy copy notifications - mac80211: fix NULL ptr deref for injected rate info - Revert "net/mlx5: Arm only EQs with EQEs" it may cause missed IRQs Previous releases - always broken: - bpf: more speculative execution fixes - netfilter: nft_fib_ipv6: skip ipv6 packets from any to link-local - udp: fix race between close() and udp_abort() resulting in a panic - fix out of bounds when parsing TCP options before packets are validated (in netfilter: synproxy, tc: sch_cake and mptcp) - mptcp: improve operation under memory pressure, add missing wake-ups - mptcp: fix double-lock/soft lookup in subflow_error_report() - bridge: fix races (null pointer deref and UAF) in vlan tunnel egress - ena: fix DMA mapping function issues in XDP - rds: fix memory leak in rds_recvmsg Misc: - vrf: allow larger MTUs - icmp: don't send out ICMP messages with a source address of 0.0.0.0 - cdc_ncm: switch to eth%d interface naming" * tag 'net-5.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (139 commits) net: ethernet: fix potential use-after-free in ec_bhf_remove selftests/net: Add icmp.sh for testing ICMP dummy address responses icmp: don't send out ICMP messages with a source address of 0.0.0.0 net: ll_temac: Avoid ndo_start_xmit returning NETDEV_TX_BUSY net: ll_temac: Fix TX BD buffer overwrite net: ll_temac: Add memory-barriers for TX BD access net: ll_temac: Make sure to free skb when it is completely used MAINTAINERS: add Guvenc as SMC maintainer bnxt_en: Call bnxt_ethtool_free() in bnxt_init_one() error path bnxt_en: Fix TQM fastpath ring backing store computation bnxt_en: Rediscover PHY capabilities after firmware reset cxgb4: fix wrong shift. mac80211: handle various extensible elements correctly mac80211: reset profile_periodicity/ema_ap cfg80211: avoid double free of PMSR request cfg80211: make certificate generation more robust mac80211: minstrel_ht: fix sample time check net: qed: Fix memcpy() overflow of qed_dcbx_params() net: cdc_eem: fix tx fixup skb leak net: hamradio: fix memory leak in mkiss_close ...
2021-06-18Merge tag 'pci-v5.13-fixes-2' of ↵Linus Torvalds6-131/+262
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fixes from Bjorn Helgaas: - Clear 64-bit flag for host bridge windows below 4GB to fix a resource allocation regression added in -rc1 (Punit Agrawal) - Fix tegra194 MCFG quirk build regressions added in -rc1 (Jon Hunter) - Avoid secondary bus resets on TI KeyStone C667X devices (Antti Järvinen) - Avoid secondary bus resets on some NVIDIA GPUs (Shanker Donthineni) - Work around FLR erratum on Huawei Intelligent NIC VF (Chiqijun) - Avoid broken ATS on AMD Navi14 GPU (Evan Quan) - Trust Broadcom BCM57414 NIC to isolate functions even though it doesn't advertise ACS support (Sriharsha Basavapatna) - Work around AMD RS690 BIOSes that don't configure DMA above 4GB (Mikel Rychliski) - Fix panic during PIO transfer on Aardvark controller (Pali Rohár) * tag 'pci-v5.13-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: aardvark: Fix kernel panic during PIO transfer PCI: Add AMD RS690 quirk to enable 64-bit DMA PCI: Add ACS quirk for Broadcom BCM57414 NIC PCI: Mark AMD Navi14 GPU ATS as broken PCI: Work around Huawei Intelligent NIC VF FLR erratum PCI: Mark some NVIDIA GPUs to avoid bus reset PCI: Mark TI C667X to avoid bus reset PCI: tegra194: Fix MCFG quirk build regressions PCI: of: Clear 64-bit flag for non-prefetchable memory below 4GB
2021-06-18net: ethernet: fix potential use-after-free in ec_bhf_removePavel Skripkin1-1/+3
static void ec_bhf_remove(struct pci_dev *dev) { ... struct ec_bhf_priv *priv = netdev_priv(net_dev); unregister_netdev(net_dev); free_netdev(net_dev); pci_iounmap(dev, priv->dma_io); pci_iounmap(dev, priv->io); ... } priv is netdev private data, but it is used after free_netdev(). It can cause use-after-free when accessing priv pointer. So, fix it by moving free_netdev() after pci_iounmap() calls. Fixes: 6af55ff52b02 ("Driver for Beckhoff CX5020 EtherCAT master module.") Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-18net: ll_temac: Avoid ndo_start_xmit returning NETDEV_TX_BUSYEsben Haabendal1-0/+5
As documented in Documentation/networking/driver.rst, the ndo_start_xmit method must not return NETDEV_TX_BUSY under any normal circumstances, and as recommended, we simply stop the tx queue in advance, when there is a risk that the next xmit would cause a NETDEV_TX_BUSY return. Signed-off-by: Esben Haabendal <esben@geanix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-18net: ll_temac: Fix TX BD buffer overwriteEsben Haabendal1-1/+1
Just as the initial check, we need to ensure num_frag+1 buffers available, as that is the number of buffers we are going to use. This fixes a buffer overflow, which might be seen during heavy network load. Complete lockup of TEMAC was reproducible within about 10 minutes of a particular load. Fixes: 84823ff80f74 ("net: ll_temac: Fix race condition causing TX hang") Cc: stable@vger.kernel.org # v5.4+ Signed-off-by: Esben Haabendal <esben@geanix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-18net: ll_temac: Add memory-barriers for TX BD accessEsben Haabendal1-1/+13
Add a couple of memory-barriers to ensure correct ordering of read/write access to TX BDs. In xmit_done, we should ensure that reading the additional BD fields are only done after STS_CTRL_APP0_CMPLT bit is set. When xmit_done marks the BD as free by setting APP0=0, we need to ensure that the other BD fields are reset first, so we avoid racing with the xmit path, which writes to the same fields. Finally, making sure to read APP0 of next BD after the current BD, ensures that we see all available buffers. Signed-off-by: Esben Haabendal <esben@geanix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-18net: ll_temac: Make sure to free skb when it is completely usedEsben Haabendal1-1/+5
With the skb pointer piggy-backed on the TX BD, we have a simple and efficient way to free the skb buffer when the frame has been transmitted. But in order to avoid freeing the skb while there are still fragments from the skb in use, we need to piggy-back on the TX BD of the skb, not the first. Without this, we are doing use-after-free on the DMA side, when the first BD of a multi TX BD packet is seen as completed in xmit_done, and the remaining BDs are still being processed. Cc: stable@vger.kernel.org # v5.4+ Signed-off-by: Esben Haabendal <esben@geanix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-18bnxt_en: Call bnxt_ethtool_free() in bnxt_init_one() error pathSomnath Kotur1-0/+1
bnxt_ethtool_init() may have allocated some memory and we need to call bnxt_ethtool_free() to properly unwind if bnxt_init_one() fails. Fixes: 7c3809181468 ("bnxt_en: Refactor bnxt_init_one() and turn on TPA support on 57500 chips.") Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-18bnxt_en: Fix TQM fastpath ring backing store computationRukhsana Ansari1-1/+1
TQM fastpath ring needs to be sized to store both the requester and responder side of RoCE QPs in TQM for supporting bi-directional tests. Fix bnxt_alloc_ctx_mem() to multiply the RoCE QPs by a factor of 2 when computing the number of entries for TQM fastpath ring. This fixes an RX pipeline stall issue when running bi-directional max RoCE QP tests. Fixes: c7dd7ab4b204 ("bnxt_en: Improve TQM ring context memory sizing formulas.") Signed-off-by: Rukhsana Ansari <rukhsana.ansari@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-18bnxt_en: Rediscover PHY capabilities after firmware resetMichael Chan1-0/+5
There is a missing bnxt_probe_phy() call in bnxt_fw_init_one() to rediscover the PHY capabilities after a firmware reset. This can cause some PHY related functionalities to fail after a firmware reset. For example, in multi-host, the ability for any host to configure the PHY settings may be lost after a firmware reset. Fixes: ec5d31e3c15d ("bnxt_en: Handle firmware reset status during IF_UP.") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-18cxgb4: fix wrong shift.Pavel Machek1-1/+1
While fixing coverity warning, commit dd2c79677375 introduced typo in shift value. Fix that. Signed-off-by: Pavel Machek (CIP) <pavel@denx.de> Fixes: dd2c79677375 ("cxgb4: Fix unintentional sign extension issues") Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-18Merge tag 'pm-5.13-rc7' of ↵Linus Torvalds2-243/+12
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fix from Rafael Wysocki: "Remove recently added frequency invariance support from the CPPC cpufreq driver, because it has turned out to be problematic and it cannot be fixed properly on time for 5.13 (Viresh Kumar)" * tag 'pm-5.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: Revert "cpufreq: CPPC: Add support for frequency invariance"
2021-06-18Merge tag 'usb-5.13-rc7' of ↵Linus Torvalds3-3/+22
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are three small USB fixes for reported problems for 5.13-rc7. They include: - disable autosuspend for a cypress USB hub - fix the battery charger detection for the chipidea driver - fix a kernel panic in the dwc3 driver due to a previous change in 5.13-rc1. All have been in linux-next with no reported problems" * tag 'usb-5.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: core: hub: Disable autosuspend for Cypress CY7C65632 usb: chipidea: imx: Fix Battery Charger 1.2 CDP detection usb: dwc3: core: fix kernel panic when do reboot
2021-06-18Merge tag 'drm-fixes-2021-06-18' of git://anongit.freedesktop.org/drm/drmLinus Torvalds2-2/+10
Pull drm fixes from Dave Airlie: "Not much happening in fixes land this week only one PR for two amdgpu powergating fixes was waiting for me, maybe something will show up over the weekend, maybe not. amdgpu: - GFX9 and 10 powergating fixes" * tag 'drm-fixes-2021-06-18' of git://anongit.freedesktop.org/drm/drm: drm/amdgpu/gfx10: enlarge CP_MEC_DOORBELL_RANGE_UPPER to cover full doorbell. drm/amdgpu/gfx9: fix the doorbell missing when in CGPG issue.
2021-06-18PCI: aardvark: Fix kernel panic during PIO transferPali Rohár1-9/+40
Trying to start a new PIO transfer by writing value 0 in PIO_START register when previous transfer has not yet completed (which is indicated by value 1 in PIO_START) causes an External Abort on CPU, which results in kernel panic: SError Interrupt on CPU0, code 0xbf000002 -- SError Kernel panic - not syncing: Asynchronous SError Interrupt To prevent kernel panic, it is required to reject a new PIO transfer when previous one has not finished yet. If previous PIO transfer is not finished yet, the kernel may issue a new PIO request only if the previous PIO transfer timed out. In the past the root cause of this issue was incorrectly identified (as it often happens during link retraining or after link down event) and special hack was implemented in Trusted Firmware to catch all SError events in EL3, to ignore errors with code 0xbf000002 and not forwarding any other errors to kernel and instead throw panic from EL3 Trusted Firmware handler. Links to discussion and patches about this issue: https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git/commit/?id=3c7dcdac5c50 https://lore.kernel.org/linux-pci/20190316161243.29517-1-repk@triplefau.lt/ https://lore.kernel.org/linux-pci/971be151d24312cc533989a64bd454b4@www.loen.fr/ https://review.trustedfirmware.org/c/TF-A/trusted-firmware-a/+/1541 But the real cause was the fact that during link retraining or after link down event the PIO transfer may take longer time, up to the 1.44s until it times out. This increased probability that a new PIO transfer would be issued by kernel while previous one has not finished yet. After applying this change into the kernel, it is possible to revert the mentioned TF-A hack and SError events do not have to be caught in TF-A EL3. Link: https://lore.kernel.org/r/20210608203655.31228-1-pali@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Marek Behún <kabel@kernel.org> Cc: stable@vger.kernel.org # 7fbcb5da811b ("PCI: aardvark: Don't rely on jiffies while holding spinlock")
2021-06-18PCI: Add ACS quirk for Broadcom BCM57414 NICSriharsha Basavapatna1-0/+2
The Broadcom BCM57414 NIC may be a multi-function device. While it does not advertise an ACS capability, peer-to-peer transactions are not possible between the individual functions, so it is safe to treat them as fully isolated. Add an ACS quirk for this device so the functions can be in independent IOMMU groups and attached individually to userspace applications using VFIO. [bhelgaas: commit log] Link: https://lore.kernel.org/r/1621645997-16251-1-git-send-email-michael.chan@broadcom.com Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org
2021-06-18PCI: Mark AMD Navi14 GPU ATS as brokenEvan Quan1-1/+3
Observed unexpected GPU hang during runpm stress test on 0x7341 rev 0x00. Further debugging shows broken ATS is related. Disable ATS on this part. Similar issues on other devices: a2da5d8cc0b0 ("PCI: Mark AMD Raven iGPU ATS as broken in some platforms") 45beb31d3afb ("PCI: Mark AMD Navi10 GPU rev 0x00 ATS as broken") 5e89cd303e3a ("PCI: Mark AMD Navi14 GPU rev 0xc5 ATS as broken") Suggested-by: Alex Deucher <alexander.deucher@amd.com> Link: https://lore.kernel.org/r/20210602021255.939090-1-evan.quan@amd.com Signed-off-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Krzysztof Wilczyński <kw@linux.com> Cc: stable@vger.kernel.org
2021-06-18PCI: Work around Huawei Intelligent NIC VF FLR erratumChiqijun1-0/+65
pcie_flr() starts a Function Level Reset (FLR), waits 100ms (the maximum time allowed for FLR completion by PCIe r5.0, sec 6.6.2), and waits for the FLR to complete. It assumes the FLR is complete when a config read returns valid data. When we do an FLR on several Huawei Intelligent NIC VFs at the same time, firmware on the NIC processes them serially. The VF may respond to config reads before the firmware has completed its reset processing. If we bind a driver to the VF (e.g., by assigning the VF to a virtual machine) in the interval between the successful config read and completion of the firmware reset processing, the NIC VF driver may fail to load. Prevent this driver failure by waiting for the NIC firmware to complete its reset processing. Not all NIC firmware supports this feature. [bhelgaas: commit log] Link: https://support.huawei.com/enterprise/en/doc/EDOC1100063073/87950645/vm-oss-occasionally-fail-to-load-the-in200-driver-when-the-vf-performs-flr Link: https://lore.kernel.org/r/20210414132301.1793-1-chiqijun@huawei.com Signed-off-by: Chiqijun <chiqijun@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Alex Williamson <alex.williamson@redhat.com> Cc: stable@vger.kernel.org
2021-06-18PCI: Mark some NVIDIA GPUs to avoid bus resetShanker Donthineni1-0/+12
Some NVIDIA GPU devices do not work with SBR. Triggering SBR leaves the device inoperable for the current system boot. It requires a system hard-reboot to get the GPU device back to normal operating condition post-SBR. For the affected devices, enable NO_BUS_RESET quirk to avoid the issue. This issue will be fixed in the next generation of hardware. Link: https://lore.kernel.org/r/20210608054857.18963-8-ameynarkhede03@gmail.com Signed-off-by: Shanker Donthineni <sdonthineni@nvidia.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Sinan Kaya <okaya@kernel.org> Cc: stable@vger.kernel.org
2021-06-18PCI: Mark TI C667X to avoid bus resetAntti Järvinen1-0/+10
Some TI KeyStone C667X devices do not support bus/hot reset. The PCIESS automatically disables LTSSM when Secondary Bus Reset is received and device stops working. Prevent bus reset for these devices. With this change, the device can be assigned to VMs with VFIO, but it will leak state between VMs. Reference: https://e2e.ti.com/support/processors/f/791/t/954382 Link: https://lore.kernel.org/r/20210315102606.17153-1-antti.jarvinen@gmail.com Signed-off-by: Antti Järvinen <antti.jarvinen@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Kishon Vijay Abraham I <kishon@ti.com> Cc: stable@vger.kernel.org
2021-06-18PCI: tegra194: Fix MCFG quirk build regressionsJon Hunter3-121/+128
7f100744749e ("PCI: tegra: Add Tegra194 MCFG quirks for ECAM errata") caused a few build regressions: - 7f100744749e removed the Makefile rule for CONFIG_PCIE_TEGRA194, so pcie-tegra.c can no longer be built as a module. Restore that rule. - 7f100744749e added "#ifdef CONFIG_PCIE_TEGRA194" around the native driver, but that's only set when the driver is built-in (for a module, CONFIG_PCIE_TEGRA194_MODULE is defined). The ACPI quirk is completely independent of the rest of the native driver, so move the quirk to its own file and remove the #ifdef in the native driver. - 7f100744749e added symbols that are always defined but used only when CONFIG_PCIEASPM, which causes warnings when CONFIG_PCIEASPM is not set: drivers/pci/controller/dwc/pcie-tegra194.c:259:18: warning: ‘event_cntr_data_offset’ defined but not used [-Wunused-const-variable=] drivers/pci/controller/dwc/pcie-tegra194.c:250:18: warning: ‘event_cntr_ctrl_offset’ defined but not used [-Wunused-const-variable=] drivers/pci/controller/dwc/pcie-tegra194.c:243:27: warning: ‘pcie_gen_freq’ defined but not used [-Wunused-const-variable=] Fixes: 7f100744749e ("PCI: tegra: Add Tegra194 MCFG quirks for ECAM errata") Link: https://lore.kernel.org/r/20210610064134.336781-1-jonathanh@nvidia.com Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Thierry Reding <treding@nvidia.com>
2021-06-18PCI: of: Clear 64-bit flag for non-prefetchable memory below 4GBPunit Agrawal1-0/+2
Alexandru and Qu reported this resource allocation failure on ROCKPro64 v2 and ROCK Pi 4B, both based on the RK3399: pci_bus 0000:00: root bus resource [mem 0xfa000000-0xfbdfffff 64bit] pci 0000:00:00.0: PCI bridge to [bus 01] pci 0000:00:00.0: BAR 14: no space for [mem size 0x00100000] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit] "BAR 14" is the PCI bridge's 32-bit non-prefetchable window, and our PCI allocation code isn't smart enough to allocate it in a host bridge window marked as 64-bit, even though this should work fine. A DT host bridge description includes the windows from the CPU address space to the PCI bus space. On a few architectures (microblaze, powerpc, sparc), the DT may also describe PCI devices themselves, including their BARs. Before 9d57e61bf723 ("of/pci: Add IORESOURCE_MEM_64 to resource flags for 64-bit memory addresses"), of_bus_pci_get_flags() ignored the fact that some DT addresses described 64-bit windows and BARs. That was a problem because the virtio virtual NIC has a 32-bit BAR and a 64-bit BAR, and the driver couldn't distinguish them. 9d57e61bf723 set IORESOURCE_MEM_64 for those 64-bit DT ranges, which fixed the virtio driver. But it also set IORESOURCE_MEM_64 for host bridge windows, which exposed the fact that the PCI allocator isn't smart enough to put 32-bit resources in those 64-bit windows. Clear IORESOURCE_MEM_64 from host bridge windows since we don't need that information. Suggested-by: Bjorn Helgaas <bhelgaas@google.com> Fixes: 9d57e61bf723 ("of/pci: Add IORESOURCE_MEM_64 to resource flags for 64-bit memory addresses") Link: https://lore.kernel.org/r/20210614230457.752811-1-punitagrawal@gmail.com Reported-at: https://lore.kernel.org/lkml/7a1e2ebc-f7d8-8431-d844-41a9c36a8911@arm.com/ Reported-at: https://lore.kernel.org/lkml/YMyTUv7Jsd89PGci@m4/T/#u Reported-by: Alexandru Elisei <alexandru.elisei@arm.com> Reported-by: Qu Wenruo <wqu@suse.com> Tested-by: Alexandru Elisei <alexandru.elisei@arm.com> Tested-by: Domenico Andreoli <domenico.andreoli@linux.com> Signed-off-by: Punit Agrawal <punitagrawal@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Ard Biesheuvel <ardb@kernel.org>
2021-06-18Merge tag 'amd-drm-fixes-5.13-2021-06-16' of ↵Dave Airlie2-2/+10
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-5.13-2021-06-16: amdgpu: - GFX9 and 10 powergating fixes Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210616204913.4368-1-alexander.deucher@amd.com
2021-06-17net: qed: Fix memcpy() overflow of qed_dcbx_params()Kees Cook1-1/+3
The source (&dcbx_info->operational.params) and dest (&p_hwfn->p_dcbx_info->set.config.params) are both struct qed_dcbx_params (560 bytes), not struct qed_dcbx_admin_params (564 bytes), which is used as the memcpy() size. However it seems that struct qed_dcbx_operational_params (dcbx_info->operational)'s layout matches struct qed_dcbx_admin_params (p_hwfn->p_dcbx_info->set.config)'s 4 byte difference (3 padding, 1 byte for "valid"). On the assumption that the size is wrong (rather than the source structure type), adjust the memcpy() size argument to be 4 bytes smaller and add a BUILD_BUG_ON() to validate any changes to the structure sizes. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-17net: cdc_eem: fix tx fixup skb leakLinyu Yuan1-1/+1
when usbnet transmit a skb, eem fixup it in eem_tx_fixup(), if skb_copy_expand() failed, it return NULL, usbnet_start_xmit() will have no chance to free original skb. fix it by free orginal skb in eem_tx_fixup() first, then check skb clone status, if failed, return NULL to usbnet. Fixes: 9f722c0978b0 ("usbnet: CDC EEM support (v5)") Signed-off-by: Linyu Yuan <linyyuan@codeaurora.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-17Merge tag 'mlx5-fixes-2021-06-16' of ↵David S. Miller7-14/+45
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5 fixes 2021-06-16 This series introduces some fixes to mlx5 driver. Please pull and let me know if there is any problem. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-17net: hamradio: fix memory leak in mkiss_closePavel Skripkin1-0/+1
My local syzbot instance hit memory leak in mkiss_open()[1]. The problem was in missing free_netdev() in mkiss_close(). In mkiss_open() netdevice is allocated and then registered, but in mkiss_close() netdevice was only unregistered, but not freed. Fail log: BUG: memory leak unreferenced object 0xffff8880281ba000 (size 4096): comm "syz-executor.1", pid 11443, jiffies 4295046091 (age 17.660s) hex dump (first 32 bytes): 61 78 30 00 00 00 00 00 00 00 00 00 00 00 00 00 ax0............. 00 27 fa 2a 80 88 ff ff 00 00 00 00 00 00 00 00 .'.*............ backtrace: [<ffffffff81a27201>] kvmalloc_node+0x61/0xf0 [<ffffffff8706e7e8>] alloc_netdev_mqs+0x98/0xe80 [<ffffffff84e64192>] mkiss_open+0xb2/0x6f0 [1] [<ffffffff842355db>] tty_ldisc_open+0x9b/0x110 [<ffffffff84236488>] tty_set_ldisc+0x2e8/0x670 [<ffffffff8421f7f3>] tty_ioctl+0xda3/0x1440 [<ffffffff81c9f273>] __x64_sys_ioctl+0x193/0x200 [<ffffffff8911263a>] do_syscall_64+0x3a/0xb0 [<ffffffff89200068>] entry_SYSCALL_64_after_hwframe+0x44/0xae BUG: memory leak unreferenced object 0xffff8880141a9a00 (size 96): comm "syz-executor.1", pid 11443, jiffies 4295046091 (age 17.660s) hex dump (first 32 bytes): e8 a2 1b 28 80 88 ff ff e8 a2 1b 28 80 88 ff ff ...(.......(.... 98 92 9c aa b0 40 02 00 00 00 00 00 00 00 00 00 .....@.......... backtrace: [<ffffffff8709f68b>] __hw_addr_create_ex+0x5b/0x310 [<ffffffff8709fb38>] __hw_addr_add_ex+0x1f8/0x2b0 [<ffffffff870a0c7b>] dev_addr_init+0x10b/0x1f0 [<ffffffff8706e88b>] alloc_netdev_mqs+0x13b/0xe80 [<ffffffff84e64192>] mkiss_open+0xb2/0x6f0 [1] [<ffffffff842355db>] tty_ldisc_open+0x9b/0x110 [<ffffffff84236488>] tty_set_ldisc+0x2e8/0x670 [<ffffffff8421f7f3>] tty_ioctl+0xda3/0x1440 [<ffffffff81c9f273>] __x64_sys_ioctl+0x193/0x200 [<ffffffff8911263a>] do_syscall_64+0x3a/0xb0 [<ffffffff89200068>] entry_SYSCALL_64_after_hwframe+0x44/0xae BUG: memory leak unreferenced object 0xffff8880219bfc00 (size 512): comm "syz-executor.1", pid 11443, jiffies 4295046091 (age 17.660s) hex dump (first 32 bytes): 00 a0 1b 28 80 88 ff ff 80 8f b1 8d ff ff ff ff ...(............ 80 8f b1 8d ff ff ff ff 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff81a27201>] kvmalloc_node+0x61/0xf0 [<ffffffff8706eec7>] alloc_netdev_mqs+0x777/0xe80 [<ffffffff84e64192>] mkiss_open+0xb2/0x6f0 [1] [<ffffffff842355db>] tty_ldisc_open+0x9b/0x110 [<ffffffff84236488>] tty_set_ldisc+0x2e8/0x670 [<ffffffff8421f7f3>] tty_ioctl+0xda3/0x1440 [<ffffffff81c9f273>] __x64_sys_ioctl+0x193/0x200 [<ffffffff8911263a>] do_syscall_64+0x3a/0xb0 [<ffffffff89200068>] entry_SYSCALL_64_after_hwframe+0x44/0xae BUG: memory leak unreferenced object 0xffff888029b2b200 (size 256): comm "syz-executor.1", pid 11443, jiffies 4295046091 (age 17.660s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff81a27201>] kvmalloc_node+0x61/0xf0 [<ffffffff8706f062>] alloc_netdev_mqs+0x912/0xe80 [<ffffffff84e64192>] mkiss_open+0xb2/0x6f0 [1] [<ffffffff842355db>] tty_ldisc_open+0x9b/0x110 [<ffffffff84236488>] tty_set_ldisc+0x2e8/0x670 [<ffffffff8421f7f3>] tty_ioctl+0xda3/0x1440 [<ffffffff81c9f273>] __x64_sys_ioctl+0x193/0x200 [<ffffffff8911263a>] do_syscall_64+0x3a/0xb0 [<ffffffff89200068>] entry_SYSCALL_64_after_hwframe+0x44/0xae Fixes: 815f62bf7427 ("[PATCH] SMP rewrite of mkiss") Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-17be2net: Fix an error handling path in 'be_probe()'Christophe JAILLET1-0/+1
If an error occurs after a 'pci_enable_pcie_error_reporting()' call, it must be undone by a corresponding 'pci_disable_pcie_error_reporting()' call, as already done in the remove function. Fixes: d6b6d9877878 ("be2net: use PCIe AER capability") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-17usb: core: hub: Disable autosuspend for Cypress CY7C65632Andrew Lunn1-0/+7
The Cypress CY7C65632 appears to have an issue with auto suspend and detecting devices, not too dissimilar to the SMSC 5534B hub. It is easiest to reproduce by connecting multiple mass storage devices to the hub at the same time. On a Lenovo Yoga, around 1 in 3 attempts result in the devices not being detected. It is however possible to make them appear using lsusb -v. Disabling autosuspend for this hub resolves the issue. Fixes: 1208f9e1d758 ("USB: hub: Fix the broken detection of USB3 device in SMSC hub") Cc: stable@vger.kernel.org Signed-off-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20210614155524.2228800-1-andrew@lunn.ch Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-17Merge tag 'irqchip-fixes-5.13-2' of ↵Thomas Gleixner1-1/+35
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent Pull irqchip fixes from Marc Zyngier: - Fix GICv3 NMI handling where an IRQ could be mistakenly handled as a NMI, with disatrous effects Link: https://lore.kernel.org/r/20210610171127.2404752-1-maz@kernel.org
2021-06-17net/mlx5: Reset mkey index on creationAya Levin1-1/+1
Reset only the index part of the mkey and keep the variant part. On devlink reload, driver recreates mkeys, so the mkey index may change. Trying to preserve the variant part of the mkey, driver mistakenly merged the mkey index with current value. In case of a devlink reload, current value of index part is dirty, so the index may be corrupted. Fixes: 54c62e13ad76 ("{IB,net}/mlx5: Setup mkey variant before mr create command invocation") Signed-off-by: Aya Levin <ayal@nvidia.com> Signed-off-by: Amir Tzin <amirtz@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-06-17net/mlx5e: Don't create devices during unload flowDmytro Linkin1-0/+4
Running devlink reload command for port in switchdev mode cause resources to corrupt: driver can't release allocated EQ and reclaim memory pages, because "rdma" auxiliary device had add CQs which blocks EQ from deletion. Erroneous sequence happens during reload-down phase, and is following: 1. detach device - suspends auxiliary devices which support it, destroys others. During this step "eth-rep" and "rdma-rep" are destroyed, "eth" - suspended. 2. disable SRIOV - moves device to legacy mode; as part of disablement - rescans drivers. This step adds "rdma" auxiliary device. 3. destroy EQ table - <failure>. Driver shouldn't create any device during unload flows. To handle that implement MLX5_PRIV_FLAGS_DETACH flag, set it on device detach and unset on device attach. If flag is set do no-op on drivers rescan. Fixes: a925b5e309c9 ("net/mlx5: Register mlx5 devices to auxiliary virtual bus") Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-06-17net/mlx5: DR, Fix STEv1 incorrect L3 decapsulation paddingAlex Vesker1-10/+16
Decapsulation L3 on small inner packets which are less than 64 Bytes was done incorrectly. In small packets there is an extra padding added in L2 which should not be included in L3 length. The issue was that after decapL3 the extra L2 padding caused an update on the L3 length. To avoid this issue the new header is pushed to the beginning of the packet (offset 0) which should not cause a HW reparse and update the L3 length. Fixes: c349b4137cfd ("net/mlx5: DR, Add STEv1 modify header logic") Reviewed-by: Erez Shitrit <erezsh@nvidia.com> Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Signed-off-by: Alex Vesker <valex@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-02-15 03:57:00 +0300