summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2010-09-29pcmcia: move config_{base,index,regs} to struct pcmcia_deviceDominik Brodowski41-92/+88
Several drivers prefer to explicitly set config_{base,index,regs}, formerly known as ConfigBase, ConfigIndex and Present. Instead of passing these values inside config_req_t, store it in struct pcmcia_device. CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: linux-ide@vger.kernel.org CC: linux-usb@vger.kernel.org CC: laforge@gnumonks.org CC: linux-mtd@lists.infradead.org CC: alsa-devel@alsa-project.org CC: linux-serial@vger.kernel.org CC: Jiri Kosina <jkosina@suse.cz> CC: linux-scsi@vger.kernel.org Acked-by: Gustavo F. Padovan <padovan@profusion.mobi> (for drivers/bluetooth) Tested-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-09-29pcmcia: simplify IntTypeDominik Brodowski54-69/+1
IntType was only set to INT_MEMORY (driver pcmciamtd) or INT_MEMORY_AND_IO (all other drivers). As this flags seems to relate to ioport access, make it conditional to the driver having requested IO port access. There are two drivers which do not request IO ports, but did set INT_MEMORY_AND_IO: ray_cs and b43. For those, we consistently only set INT_MEMORY in future. CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: linux-ide@vger.kernel.org CC: linux-usb@vger.kernel.org CC: laforge@gnumonks.org CC: linux-mtd@lists.infradead.org CC: alsa-devel@alsa-project.org CC: linux-serial@vger.kernel.org CC: Jiri Kosina <jkosina@suse.cz> CC: linux-scsi@vger.kernel.org Acked-by: Gustavo F. Padovan <padovan@profusion.mobi> (for drivers/bluetooth) Tested-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-09-29pcmcia: simplify Status, ExtStatus register accessDominik Brodowski15-52/+37
The Status (CISREG_CCSR) and ExtStatus (CISREG_ESR) registers were only accessed to enable audio output for some drivers and IRQ for serial_cs.c. The former also required setting config_req_t.Attributes to CONF_ENABLE_SPKR; the latter can be simplified to setting this field to CONF_ENABLE_ESR. CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: linux-serial@vger.kernel.org CC: linux-scsi@vger.kernel.org Tested-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-09-29pcmcia: remove Pin, Copy configuration register accessDominik Brodowski2-7/+9
The "Pin" and "Copy" configuration registers (CISREG_SCR, CISREG_PPR) do not seem to be utilized anywhere. If a device would request a write to these registers, "0" would be written. Continue to do so, but warn of unexpected behavior -- and remove the "Pin" and "Copy" entries from config_req_t. Tested-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-09-29pcmcia: move Vpp setup to struct pcmcia_deviceDominik Brodowski15-38/+39
Some drivers prefer to explicitly set Vpp. Instead of passing the voltage inside config_req_t, store it in struct pcmcia_device. CC: linux-ide@vger.kernel.org CC: netdev@vger.kernel.org CC: linux-mtd@lists.infradead.org CC: linux-wireless@vger.kernel.org CC: linux-serial@vger.kernel.org CC: linux-usb@vger.kernel.org CC: linux-scsi@vger.kernel.org Acked-by: Gustavo F. Padovan <padovan@profusion.mobi> (for drivers/bluetooth) Tested-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-09-29pcmcia: split up modify_configuration() into two fixup functionsDominik Brodowski3-76/+65
pcmcia_modify_configuration() was only used by two drivers to fix up one issue each: setting the Vpp to a different value, and reducing the IO width to 8 bit. Introduce two explicitly named functions handling these things, and remove one further typedef. CC: netdev@vger.kernel.org CC: linux-mtd@lists.infradead.org Tested-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-09-29pcmcia: do not use win_req_t when calling pcmcia_request_window()Dominik Brodowski13-246/+213
Instead of win_req_t, drivers are now requested to fill out struct pcmcia_device *p_dev->resource[2,3,4,5] for up to four iomem ranges. After a call to pcmcia_request_window(), the windows found there are reserved and may be used until pcmcia_release_window() is called. CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: linux-mtd@lists.infradead.org CC: Jiri Kosina <jkosina@suse.cz> CC: linux-scsi@vger.kernel.org Tested-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-09-28Merge branch 'upstream-linus' of ↵Linus Torvalds4-14/+24
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: ahci: fix module refcount breakage introduced by libahci split
2010-09-28ahci: fix module refcount breakage introduced by libahci splitTejun Heo4-14/+24
libata depends on scsi_host_template for module reference counting and sht's should be owned by each low level driver. During libahci split, the sht was left with libahci.ko leaving the actual low level drivers not reference counted. This made ahci and ahci_platform always unloadable even while they're being actively used. Fix it by defining AHCI_SHT() macro in ahci.h and defining a sht for each low level ahci driver. stable: only applicable to 2.6.35. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Pedro Francisco <pedrogfrancisco@gmail.com> Tested-by: Michael Tokarev <mjt@tls.msk.ru> Cc: stable@kernel.org Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-09-28Merge branch 'hwmon-for-linus' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging: hwmon (coretemp): Fix build breakage if SMP is undefined
2010-09-28Merge branch 'for-linus' of ↵Linus Torvalds2-3/+4
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI: fix pci_resource_alignment prototype
2010-09-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds16-69/+259
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (47 commits) tcp: Fix >4GB writes on 64-bit. net/9p: Mount only matching virtio channels de2104x: fix ethtool tproxy: check for transparent flag in ip_route_newports ipv6: add IPv6 to neighbour table overflow warning tcp: fix TSO FACK loss marking in tcp_mark_head_lost 3c59x: fix regression from patch "Add ethtool WOL support" ipv6: add a missing unregister_pernet_subsys call s390: use free_netdev(netdev) instead of kfree() sgiseeq: use free_netdev(netdev) instead of kfree() rionet: use free_netdev(netdev) instead of kfree() ibm_newemac: use free_netdev(netdev) instead of kfree() smsc911x: Add MODULE_ALIAS() net: reset skb queue mapping when rx'ing over tunnel br2684: fix scheduling while atomic de2104x: fix TP link detection de2104x: fix power management de2104x: disable autonegotiation on broken hardware net: fix a lockdep splat e1000e: 82579 do not gate auto config of PHY by hardware during nominal use ...
2010-09-28hwmon (coretemp): Fix build breakage if SMP is undefinedGuenter Roeck1-0/+1
Commit e40cc4bdfd4b89813f072f72bd9c7055814d3f0f introduced a build breakage if CONFIG_SMP is undefined. This commit fixes the problem. This fix is only a workaround. For a real fix, cpu_sibling_mask() should be defined in UP include code, eg in linux/smp.h, and asm/smp.h should not be included directly. This fix is currently not possible because asm/smp.h defines cpu_sibling_mask() unconditionally and is included directly from many source files. Reported-by: Ingo Molnar <mingo@elte.hu> Tested-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Cc: Fenghua Yu <fenghua.yu@intel.com>
2010-09-28Fix pktcdvd ioctl dev_minor range checkDan Rosenberg1-1/+1
The PKT_CTRL_CMD_STATUS device ioctl retrieves a pointer to a pktcdvd_device from the global pkt_devs array. The index into this array is provided directly by the user and is a signed integer, so the comparison to ensure that it falls within the bounds of this array will fail when provided with a negative index. This can be used to read arbitrary kernel memory or cause a crash due to an invalid pointer dereference. This can be exploited by users with permission to open /dev/pktcdvd/control (on many distributions, this is readable by group "cdrom"). Signed-off-by: Dan Rosenberg <dan.j.rosenberg@gmail.com> [ Rather than add a cast, just make the function take the right type -Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-09-28de2104x: fix ethtoolOndrej Zary1-2/+5
When the interface is up, using ethtool breaks it because: a) link is put down but media_timer interval is not shortened to NO_LINK b) rxtx is stopped but not restarted Also manual 10baseT-HD (and probably FD too - untested) mode does not work - the link is forced up, packets are transmitted but nothing is received. Changing CSR14 value to match documentation (not disabling link check) fixes this. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-28Merge branch 'vhost-net' of ↵David S. Miller1-3/+4
git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
2010-09-27Merge branch 'for-linus' of ↵Linus Torvalds1-2/+4
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: RDMA/cxgb3: Turn off RX coalescing for iWARP connections
2010-09-27Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds3-7/+8
* master.kernel.org:/home/rmk/linux-2.6-arm: (28 commits) ARM: 6411/1: vexpress: set RAM latencies to 1 cycle for PL310 on ct-ca9x4 tile ARM: 6409/1: davinci: map sram using MT_MEMORY_NONCACHED instead of MT_DEVICE ARM: 6408/1: omap: Map only available sram memory ARM: 6407/1: mmu: Setup MT_MEMORY and MT_MEMORY_NONCACHED L1 entries ARM: pxa: remove pr_<level> uses of KERN_<level> ARM: pxa168fb: clear enable bit when not active ARM: pxa: fix cpu_is_pxa*() not expanding to zero when not configured ARM: pxa168: fix corrected reset vector ARM: pxa: Use PIO for PI2C communication on Palm27x ARM: pxa: Fix Vpac270 gpio_power for MMC ARM: 6401/1: plug a race in the alignment trap handler ARM: 6406/1: at91sam9g45: fix i2c bus speed leds: leds-ns2: fix locking ARM: dove: fix __io() definition to use bus based offset dmaengine: fix interrupt clearing for mv_xor ARM: kirkwood: Unbreak PCIe I/O port ARM: Fix build error when using KCONFIG_CONFIG ARM: 6383/1: Implement phys_mem_access_prot() to avoid attributes aliasing ARM: 6400/1: at91: fix arch_gettimeoffset fallout ARM: 6398/1: add proc info for ARM11MPCore/Cortex-A9 from ARM ...
2010-09-27Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bpLinus Torvalds1-0/+3
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: amd64_edac: Fix driver module removal
2010-09-27Merge branch 'drm-intel-fixes' of ↵Linus Torvalds2-10/+7
git://git.kernel.org/pub/scm/linux/kernel/git/ickle/drm-intel * 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ickle/drm-intel: drm/i915/sdvo: Handle unsupported GET_SUPPORTED_ENHANCEMENTS gracefully drm/i915/sdvo: Cleanup connector on error path drm/i915: Fix 945GM regression in e259befd
2010-09-27Merge branch 'for-linus' of ↵Linus Torvalds1-4/+8
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: mmc: sdhci-s3c: fix NULL ptr access in sdhci_s3c_remove mmc: sdhci-s3c: fix incorrect spinlock usage after merge mmc: MAINTAINERS: add myself as MMC maintainer
2010-09-27Merge branch 'urgent' of ↵Linus Torvalds2-1/+7
git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6 * 'urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: pcmcia: pd6729: Fix error path pcmcia: preserve configuration information if request_io fails partly
2010-09-27Merge git://git.infradead.org/iommu-2.6Linus Torvalds1-0/+27
* git://git.infradead.org/iommu-2.6: intel-iommu: Use symbolic values instead of magic numbers in Lenovo w/a intel-iommu: Abort IOMMU setup for igfx if BIOS gave no shadow GTT space
2010-09-273c59x: fix regression from patch "Add ethtool WOL support"Jan Beulich1-0/+10
This patch (commit 690a1f2002a3091bd18a501f46c9530f10481463) added a new call site for acpi_set_WOL() without checking that the function is actually suitable to be called via vortex_set_wol+0xcd/0xe0 [3c59x] dev_ethtool+0xa5a/0xb70 dev_ioctl+0x2e0/0x4b0 T.961+0x49/0x50 sock_ioctl+0x47/0x290 do_vfs_ioctl+0x7f/0x340 sys_ioctl+0x80/0xa0 system_call_fastpath+0x16/0x1b i.e. outside of code paths run when the device is not yet enabled or already disabled. In particular, putting the device into D3hot is a pretty bad idea when it was already brought up. Furthermore, all prior callers of the function made sure they're actually dealing with a PCI device, while the newly added one didn't. In the same spirit, the .get_wol handler shouldn't indicate support for WOL for non-PCI devices. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-27RDMA/cxgb3: Turn off RX coalescing for iWARP connectionsSteve Wise1-2/+4
The HW by default has RX coalescing on. For iWARP connections, this causes a 100ms delay in connection establishement due to the ingress MPA Start message being stalled in HW. So explicitly turn RX coalescing off when setting up iWARP connections. This was causing very bad performance for NP64 gather operations using Open MPI, due to the way it sets up connections on larger jobs. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Cc: <stable@kernel.org> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-09-27amd64_edac: Fix driver module removalBorislav Petkov1-0/+3
f4347553b30ec66530bfe63c84530afea3803396 removed the edac polling mechanism in favor of using a notifier chain for conveying MCE information to edac. However, the module removal path didn't test whether the driver had setup the polling function workqueue at all and the rmmod process was hanging in the kernel at try_to_del_timer_sync() in the cancel_delayed_work() path, trying to cancel an uninitialized work struct. Fix that by adding a balancing check to the workqueue removal path. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2010-09-27s390: use free_netdev(netdev) instead of kfree()Vasiliy Kulikov1-2/+2
Freeing netdev without free_netdev() leads to net, tx leaks. I might lead to dereferencing freed pointer. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) @@ struct net_device* dev; @@ -kfree(dev) +free_netdev(dev) Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-27sgiseeq: use free_netdev(netdev) instead of kfree()Kulikov Vasiliy1-1/+1
Freeing netdev without free_netdev() leads to net, tx leaks. I might lead to dereferencing freed pointer. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) @@ struct net_device* dev; @@ -kfree(dev) +free_netdev(dev) Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-27rionet: use free_netdev(netdev) instead of kfree()Kulikov Vasiliy1-1/+1
Freeing netdev without free_netdev() leads to net, tx leaks. I might lead to dereferencing freed pointer. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) @@ struct net_device* dev; @@ -kfree(dev) +free_netdev(dev) Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-27ibm_newemac: use free_netdev(netdev) instead of kfree()Kulikov Vasiliy1-2/+2
Freeing netdev without free_netdev() leads to net, tx leaks. I might lead to dereferencing freed pointer. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) @@ struct net_device* dev; @@ -kfree(dev) +free_netdev(dev) Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-27smsc911x: Add MODULE_ALIAS()Vincent Stehlé1-0/+1
This enables auto loading for the smsc911x ethernet driver. Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-27de2104x: fix TP link detectionOndrej Zary1-2/+21
Compex FreedomLine 32 PnP-PCI2 cards have only TP and BNC connectors but the SROM contains AUI port too. When TP loses link, the driver switches to non-existing AUI port (which reports that carrier is always present). Connecting TP back generates LinkPass interrupt but de_media_interrupt() is broken - it only updates the link state of currently connected media, ignoring the fact that LinkPass and LinkFail bits of MacStatus register belong to the TP port only (the chip documentation says that). This patch changes de_media_interrupt() to switch media to TP when link goes up (and media type is not locked) and also to update the link state only when the TP port is used. Also the NonselPortActive (and also SelPortActive) bits of SIAStatus register need to be cleared (by writing 1) after reading or they're useless. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-27de2104x: fix power managementOndrej Zary1-0/+3
At least my 21041 cards come out of suspend with bus mastering disabled so they did not work after resume(no data transferred). After adding pci_set_master(), the driver oopsed immediately on resume - because de_clean_rings() is called on suspend but de_init_rings() call was missing in resume. Also disable link (reset SIA) before sleep (de4x5 does this too). Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-27mmc: sdhci-s3c: fix NULL ptr access in sdhci_s3c_removeMarek Szyprowski1-2/+4
If not all clocks have been defined in platform data, the driver will cause a null pointer dereference when it is removed. This patch fixes this issue. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2010-09-27mmc: sdhci-s3c: fix incorrect spinlock usage after mergeMarek Szyprowski1-2/+4
In the commit f522886e202a34a2191dd5d471b3c4d46410a9a0 a merge conflict in the sdhci-s3c driver been fixed. However the fix used incorrect spinlock operation - it caused a race with sdhci interrupt service. The correct way to solve it is to use spin_lock_irqsave/irqrestore() calls. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2010-09-26pcmcia: pd6729: Fix error pathRahul Ruikar1-1/+1
In error return path call pci_disable_device() which was enabled earlier. Signed-off-by: Rahul Ruikar <rahul.ruikar@gmail.com> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-09-25Merge branch 'fix' of ↵Russell King1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6
2010-09-25de2104x: disable autonegotiation on broken hardwareOndrej Zary1-2/+10
At least on older 21041-AA chips (mine is rev. 11), TP duplex autonegotiation causes the card not to work at all (link is up but no packets are transmitted). de4x5 disables autonegotiation completely. But it seems to work on newer (21041-PA rev. 21) so disable it only on rev<20 chips. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-25Merge branch 'hwmon-for-linus' of ↵Linus Torvalds4-39/+46
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging: x86/hwmon: pkgtemp has no dependency on PCI MAINTAINERS: Update hwmon entry x86/hwmon: register alternate sibling upon CPU removal x86/hwmon: fix initialization of pkgtemp x86/hwmon: fix initialization of coretemp x86/hwmon: don't leak device attribute file from pkgtemp_probe() and pkgtemp_remove() x86/hwmon: avoid deadlock on CPU removal in pkgtemp x86/hwmon: fix module init for hotplug-but-no-device-found case hwmon: (lis3) Fix Oops with NULL platform data
2010-09-25ARM: pxa168fb: clear enable bit when not activeHaojian Zhuang1-2/+2
While fb isn't active, we should clear CFG_GRA_ENA bit. The existing code can't clear this bit. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Acked-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-09-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds8-58/+77
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: USB: update Kconfig help text for CONFIG_USB_SUSPEND usb: musb: gadget: restart request on clearing endpoint halt usb: musb: host: Issue a memory barrier before starting DMA usb: musb: gadget: fix dma length in txstate usb: musb: gadget: complete request only if data is transfered over usb: musb: gadget: fix DMA length for OUT transfer usb: musb: gadget: enable autoclear for OUT transfer in both DMA 0 and DMA 1 usb: musb: gadget: fix bulk IN infinit hangs in double buffer case usb: musb: gadget: fix kernel panic if using out ep with FIFO_TXRX style USB: fix bug in initialization of interface minor numbers
2010-09-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6Linus Torvalds4-10/+24
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: Staging: ti-st: remove st_get_plat_device
2010-09-25Merge branch 'drm-fixes' of ↵Linus Torvalds8-12/+19
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: vgaarb: trivial fix drm: radeon cleanup fixes... drm: fix trivial coding errors drm: ttm sparse fixes. drm/nouveau: fix panels using straps-based mode detection drm/ttm: Clear the ghost cpu_writers flag on ttm_buffer_object_transfer. drm/radeon: don't allow device to be opened if powered down
2010-09-24x86/hwmon: pkgtemp has no dependency on PCIJan Beulich2-2/+1
Other than coretemp, from which this code was apparently derived, there is no PCI specific code in this driver. Signed-off-by: Jan Beulich <jbeulich@novell.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-09-24x86/hwmon: register alternate sibling upon CPU removalJan Beulich1-7/+15
Just like pkgtemp registers another core of the same package when one gets removed, coretemp should register another hyperthread (if available) in that situation. As pointed out in the patch fixing the respective code in pkgtemp, the list protectng mutex must be dropped before calling coretemp_device_add(), and due to the restructured loop (including an explicit return) the "safe" variant of the list iterator isn't needed anymore. Signed-off-by: Jan Beulich <jbeulich@novell.com> Cc: Rudolf Marek <r.marek@assembler.cz> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-09-24x86/hwmon: fix initialization of pkgtempJan Beulich1-7/+3
Feature availability should also be checked in the hotplug code path. Signed-off-by: Jan Beulich <jbeulich@novell.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-09-24x86/hwmon: fix initialization of coretempJan Beulich1-16/+13
Using cpuid_eax() to determine feature availability on other than the current CPU is invalid. And feature availability should also be checked in the hotplug code path. Signed-off-by: Jan Beulich <jbeulich@novell.com> Cc: Rudolf Marek <r.marek@assembler.cz> Cc: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-09-24x86/hwmon: don't leak device attribute file from pkgtemp_probe() and ↵Jan Beulich1-1/+4
pkgtemp_remove() While apparently inherited from coretemp source, this particular error handling cleanup and exit path wasn't copied properly (or perhaps got discarded intermediately and not re-added properly later). Signed-off-by: Jan Beulich <jbeulich@novell.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> (added device file removal in pkgtemp_remove)
2010-09-24x86/hwmon: avoid deadlock on CPU removal in pkgtempJan Beulich1-3/+4
pkgtemp_device_remove(), holding the list protecting mutex, calls pkgtemp_device_add(), which itself wants to acquire the same mutex. Holding the mutex over the entire loop body in pkgtemp_device_remove() isn't really necessary, as long as the loop gets exited after processing the matched CPU. Once exiting the loop after removing an eventual match, there's no need for using the "safe" list iterator anymore. Signed-off-by: Jan Beulich <jbeulich@novell.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-09-24x86/hwmon: fix module init for hotplug-but-no-device-found caseJan Beulich1-1/+4
In commit 0dca94baeab4a1a514841b0a4c8e3a51dfb4d5ae the call to platform_driver_unregister() was made conditional upon !HOTPLUG_CPU, but the return value from coretemp_init() was left to indicate an error. This isn't correct, as the negative return value indicates to the module loader that initialization failed, which isn't intended here and results in dangling pointers. Signed-off-by: Jan Beulich <jbeulich@novell.com> Cc: Chen Gong <gong.chen@linux.intel.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-28 14:36:25 +0300