summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2023-10-20dmaengine: mediatek: Fix deadlock caused by synchronize_irq()Duoming Zhou1-2/+1
[ Upstream commit 01f1ae2733e2bb4de92fefcea5fda847d92aede1 ] The synchronize_irq(c->irq) will not return until the IRQ handler mtk_uart_apdma_irq_handler() is completed. If the synchronize_irq() holds a spin_lock and waits the IRQ handler to complete, but the IRQ handler also needs the same spin_lock. The deadlock will happen. The process is shown below: cpu0 cpu1 mtk_uart_apdma_device_pause() | mtk_uart_apdma_irq_handler() spin_lock_irqsave() | | spin_lock_irqsave() //hold the lock to wait | synchronize_irq() | This patch reorders the synchronize_irq(c->irq) outside the spin_lock in order to mitigate the bug. Fixes: 9135408c3ace ("dmaengine: mediatek: Add MediaTek UART APDMA support") Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Reviewed-by: Eugen Hristev <eugen.hristev@collabora.com> Link: https://lore.kernel.org/r/20230806032511.45263-1-duoming@zju.edu.cn Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-20dmaengine: idxd: use spin_lock_irqsave before wait_event_lock_irqRex Zhang1-2/+3
[ Upstream commit c0409dd3d151f661e7e57b901a81a02565df163c ] In idxd_cmd_exec(), wait_event_lock_irq() explicitly calls spin_unlock_irq()/spin_lock_irq(). If the interrupt is on before entering wait_event_lock_irq(), it will become off status after wait_event_lock_irq() is called. Later, wait_for_completion() may go to sleep but irq is disabled. The scenario is warned in might_sleep(). Fix it by using spin_lock_irqsave() instead of the primitive spin_lock() to save the irq status before entering wait_event_lock_irq() and using spin_unlock_irqrestore() instead of the primitive spin_unlock() to restore the irq status before entering wait_for_completion(). Before the change: idxd_cmd_exec() { interrupt is on spin_lock() // interrupt is on wait_event_lock_irq() spin_unlock_irq() // interrupt is enabled ... spin_lock_irq() // interrupt is disabled spin_unlock() // interrupt is still disabled wait_for_completion() // report "BUG: sleeping function // called from invalid context... // in_atomic() irqs_disabled()" } After applying spin_lock_irqsave(): idxd_cmd_exec() { interrupt is on spin_lock_irqsave() // save the on state // interrupt is disabled wait_event_lock_irq() spin_unlock_irq() // interrupt is enabled ... spin_lock_irq() // interrupt is disabled spin_unlock_irqrestore() // interrupt is restored to on wait_for_completion() // No Call trace } Fixes: f9f4082dbc56 ("dmaengine: idxd: remove interrupt disable for cmd_lock") Signed-off-by: Rex Zhang <rex.zhang@intel.com> Signed-off-by: Lijun Pan <lijun.pan@intel.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Fenghua Yu <fenghua.yu@intel.com> Link: https://lore.kernel.org/r/20230916060619.3744220-1-rex.zhang@intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-20usb: cdnsp: Fixes issue with dequeuing not queued requestsPawel Laszczak1-0/+3
commit 34f08eb0ba6e4869bbfb682bf3d7d0494ffd2f87 upstream. Gadget ACM while unloading module try to dequeue not queued usb request which causes the kernel to crash. Patch adds extra condition to check whether usb request is processed by CDNSP driver. cc: stable@vger.kernel.org Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver") Signed-off-by: Pawel Laszczak <pawell@cadence.com> Acked-by: Peter Chen <peter.chen@kernel.org> Link: https://lore.kernel.org/r/20230713081429.326660-1-pawell@cadence.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-20usb: gadget: ncm: Handle decoding of multiple NTB's in unwrap callKrishna Kurapati1-7/+19
commit 427694cfaafa565a3db5c5ea71df6bc095dca92f upstream. When NCM is used with hosts like Windows PC, it is observed that there are multiple NTB's contained in one usb request giveback. Since the driver unwraps the obtained request data assuming only one NTB is present, we loose the subsequent NTB's present resulting in data loss. Fix this by checking the parsed block length with the obtained data length in usb request and continue parsing after the last byte of current NTB. Cc: stable@vger.kernel.org Fixes: 9f6ce4240a2b ("usb: gadget: f_ncm.c added") Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com> Reviewed-by: Maciej Żenczykowski <maze@google.com> Link: https://lore.kernel.org/r/20230927105858.12950-1-quic_kriskura@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-20usb: gadget: udc-xilinx: replace memcpy with memcpy_toioPiyush Mehta1-8/+12
commit 3061b6491f491197a35e14e49f805d661b02acd4 upstream. For ARM processor, unaligned access to device memory is not allowed. Method memcpy does not take care of alignment. USB detection failure with the unalingned address of memory, with below kernel crash. To fix the unalingned address kernel panic, replace memcpy with memcpy_toio method. Kernel crash: Unable to handle kernel paging request at virtual address ffff80000c05008a Mem abort info: ESR = 0x96000061 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x21: alignment fault Data abort info: ISV = 0, ISS = 0x00000061 CM = 0, WnR = 1 swapper pgtable: 4k pages, 48-bit VAs, pgdp=000000000143b000 [ffff80000c05008a] pgd=100000087ffff003, p4d=100000087ffff003, pud=100000087fffe003, pmd=1000000800bcc003, pte=00680000a0010713 Internal error: Oops: 96000061 [#1] SMP Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.15.19-xilinx-v2022.1 #1 Hardware name: ZynqMP ZCU102 Rev1.0 (DT) pstate: 200000c5 (nzCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : __memcpy+0x30/0x260 lr : __xudc_ep0_queue+0xf0/0x110 sp : ffff800008003d00 x29: ffff800008003d00 x28: ffff800009474e80 x27: 00000000000000a0 x26: 0000000000000100 x25: 0000000000000012 x24: ffff000800bc8080 x23: 0000000000000001 x22: 0000000000000012 x21: ffff000800bc8080 x20: 0000000000000012 x19: ffff000800bc8080 x18: 0000000000000000 x17: ffff800876482000 x16: ffff800008004000 x15: 0000000000004000 x14: 00001f09785d0400 x13: 0103020101005567 x12: 0781400000000200 x11: 00000000c5672a10 x10: 00000000000008d0 x9 : ffff800009463cf0 x8 : ffff8000094757b0 x7 : 0201010055670781 x6 : 4000000002000112 x5 : ffff80000c05009a x4 : ffff000800a15012 x3 : ffff00080362ad80 x2 : 0000000000000012 x1 : ffff000800a15000 x0 : ffff80000c050088 Call trace: __memcpy+0x30/0x260 xudc_ep0_queue+0x3c/0x60 usb_ep_queue+0x38/0x44 composite_ep0_queue.constprop.0+0x2c/0xc0 composite_setup+0x8d0/0x185c configfs_composite_setup+0x74/0xb0 xudc_irq+0x570/0xa40 __handle_irq_event_percpu+0x58/0x170 handle_irq_event+0x60/0x120 handle_fasteoi_irq+0xc0/0x220 handle_domain_irq+0x60/0x90 gic_handle_irq+0x74/0xa0 call_on_irq_stack+0x2c/0x60 do_interrupt_handler+0x54/0x60 el1_interrupt+0x30/0x50 el1h_64_irq_handler+0x18/0x24 el1h_64_irq+0x78/0x7c arch_cpu_idle+0x18/0x2c do_idle+0xdc/0x15c cpu_startup_entry+0x28/0x60 rest_init+0xc8/0xe0 arch_call_rest_init+0x10/0x1c start_kernel+0x694/0x6d4 __primary_switched+0xa4/0xac Fixes: 1f7c51660034 ("usb: gadget: Add xilinx usb2 device support") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/all/202209020044.CX2PfZzM-lkp@intel.com/ Cc: stable@vger.kernel.org Signed-off-by: Piyush Mehta <piyush.mehta@amd.com> Link: https://lore.kernel.org/r/20230929121514.13475-1-piyush.mehta@amd.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-20usb: typec: ucsi: Clear EVENT_PENDING bit if ucsi_send_command failsPrashanth K1-0/+1
commit a00e197daec52bcd955e118f5f57d706da5bfe50 upstream. Currently if ucsi_send_command() fails, then we bail out without clearing EVENT_PENDING flag. So when the next connector change event comes, ucsi_connector_change() won't queue the con->work, because of which none of the new events will be processed. Fix this by clearing EVENT_PENDING flag if ucsi_send_command() fails. Cc: stable@vger.kernel.org # 5.16 Fixes: 512df95b9432 ("usb: typec: ucsi: Better fix for missing unplug events issue") Signed-off-by: Prashanth K <quic_prashk@quicinc.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/1694423055-8440-1-git-send-email-quic_prashk@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-20usb: typec: altmodes/displayport: Signal hpd low when exiting modeRD Babiera1-0/+5
commit 89434b069e460967624903b049e5cf5c9e6b99b9 upstream. Upon receiving an ACK for a sent EXIT_MODE message, the DisplayPort driver currently resets the status and configuration of the port partner. The hpd signal is not updated despite being part of the status, so the Display stack can still transmit video despite typec_altmode_exit placing the lanes in a Safe State. Set hpd to low when a sent EXIT_MODE message is ACK'ed. Fixes: 0e3bb7d6894d ("usb: typec: Add driver for DisplayPort alternate mode") Cc: stable@vger.kernel.org Signed-off-by: RD Babiera <rdbabiera@google.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20231009210057.3773877-2-rdbabiera@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-20counter: microchip-tcb-capture: Fix the use of internal GCLK logicDharma Balasubiramani1-1/+1
commit df8fdd01c98b99d04915c04f3a5ce73f55456b7c upstream. As per the datasheet, the clock selection Bits 2:0 – TCCLKS[2:0] should be set to 0 while using the internal GCLK (TIMER_CLOCK1). Fixes: 106b104137fd ("counter: Add microchip TCB capture counter") Signed-off-by: Dharma Balasubiramani <dharma.b@microchip.com> Link: https://lore.kernel.org/r/20230905100835.315024-1-dharma.b@microchip.com Signed-off-by: William Breathitt Gray <william.gray@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-20counter: chrdev: fix getting array extensionsFabrice Gasnier1-2/+2
commit 3170256d7bc1ef81587caf4b83573eb1f5bb4fb6 upstream. When trying to watch a component array extension, and the array isn't the first extended element, it fails as the type comparison is always done on the 1st element. Fix it by indexing the 'ext' array. Example on a dummy struct counter_comp: static struct counter_comp dummy[] = { COUNTER_COMP_DIRECTION(..), ..., COUNTER_COMP_ARRAY_CAPTURE(...), }; static struct counter_count dummy_cnt = { ... .ext = dummy, .num_ext = ARRAY_SIZE(dummy), } Currently, counter_get_ext() returns -EINVAL when trying to add a watch event on one of the capture array element in such example. Fixes: d2011be1e22f ("counter: Introduce the COUNTER_COMP_ARRAY component type") Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Link: https://lore.kernel.org/r/20230829134029.2402868-2-fabrice.gasnier@foss.st.com Signed-off-by: William Breathitt Gray <william.gray@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-20scsi: ufs: core: Correct clear TM error logPeter Wang1-1/+1
commit a20c4350c6a12405b7f732b3ee6801ffe2cc45ce upstream. The clear TM function error log status was inverted. Fixes: 4693fad7d6d4 ("scsi: ufs: core: Log error handler activity") Signed-off-by: Peter Wang <peter.wang@mediatek.com> Link: https://lore.kernel.org/r/20231003022002.25578-1-peter.wang@mediatek.com Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-20pinctrl: avoid unsafe code pattern in find_pinctrl()Dmitry Torokhov1-7/+9
commit c153a4edff6ab01370fcac8e46f9c89cca1060c2 upstream. The code in find_pinctrl() takes a mutex and traverses a list of pinctrl structures. Later the caller bumps up reference count on the found structure. Such pattern is not safe as pinctrl that was found may get deleted before the caller gets around to increasing the reference count. Fix this by taking the reference count in find_pinctrl(), while it still holds the mutex. Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Link: https://lore.kernel.org/r/ZQs1RgTKg6VJqmPs@google.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-20dma-buf: add dma_fence_timestamp helperChristian König3-16/+8
commit b83ce9cb4a465b8f9a3fa45561b721a9551f60e3 upstream. When a fence signals there is a very small race window where the timestamp isn't updated yet. sync_file solves this by busy waiting for the timestamp to appear, but on other ocassions didn't handled this correctly. Provide a dma_fence_timestamp() helper function for this and use it in all appropriate cases. Another alternative would be to grab the spinlock when that happens. v2 by teddy: add a wait parameter to wait for the timestamp to show up, in case the accurate timestamp is needed and/or the timestamp is not based on ktime (e.g. hw timestamp) v3 chk: drop the parameter again for unified handling Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Fixes: 1774baa64f93 ("drm/scheduler: Change scheduled fence track v2") Reviewed-by: Alex Deucher <alexander.deucher@amd.com> CC: stable@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20230929104725.2358-1-christian.koenig@amd.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-20usb: typec: ucsi: Use GET_CAPABILITY attributes data to set power supply scopeMario Limonciello1-0/+9
commit c9ca8de2eb15f9da24113e652980c61f95a47530 upstream. On some OEM systems, adding a W7900 dGPU triggers RAS errors and hangs at a black screen on startup. This issue occurs only if `ucsi_acpi` has loaded before `amdgpu` has loaded. The reason for this failure is that `amdgpu` uses power_supply_is_system_supplied() to determine if running on AC or DC power at startup. If this value is reported incorrectly the dGPU will also be programmed incorrectly and trigger errors. power_supply_is_system_supplied() reports the wrong value because UCSI power supplies provided as part of the system don't properly report the scope as "DEVICE" scope (not powering the system). In order to fix this issue check the capabilities reported from the UCSI power supply to ensure that it supports charging a battery and that it can be powered by AC. Mark the scope accordingly. Cc: stable@vger.kernel.org Fixes: a7fbfd44c020 ("usb: typec: ucsi: Mark dGPUs as DEVICE scope") Link: https://www.intel.com/content/www/us/en/products/docs/io/universal-serial-bus/usb-type-c-ucsi-spec.html p28 Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20231009184643.129986-1-mario.limonciello@amd.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-20nfp: flower: avoid rmmod nfp crash issuesYanguo Li6-23/+54
commit 14690995c14109852c7ba6e316045c02e4254272 upstream. When there are CT table entries, and you rmmod nfp, the following events can happen: task1： nfp_net_pci_remove ↓ nfp_flower_stop->(asynchronous)tcf_ct_flow_table_cleanup_work(3) ↓ nfp_zone_table_entry_destroy(1) task2： nfp_fl_ct_handle_nft_flow(2) When the execution order is (1)->(2)->(3), it will crash. Therefore, in the function nfp_fl_ct_del_flow, nf_flow_table_offload_del_cb needs to be executed synchronously. At the same time, in order to solve the deadlock problem and the problem of rtnl_lock sometimes failing, replace rtnl_lock with the private nfp_fl_lock. Fixes: 7cc93d888df7 ("nfp: flower-ct: remove callback delete deadlock") Cc: stable@vger.kernel.org Signed-off-by: Yanguo Li <yanguo.li@corigine.com> Signed-off-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-20tee: amdtee: fix use-after-free vulnerability in amdtee_close_sessionRijo Thomas1-4/+6
commit f4384b3e54ea813868bb81a861bf5b2406e15d8f upstream. There is a potential race condition in amdtee_close_session that may cause use-after-free in amdtee_open_session. For instance, if a session has refcount == 1, and one thread tries to free this session via: kref_put(&sess->refcount, destroy_session); the reference count will get decremented, and the next step would be to call destroy_session(). However, if in another thread, amdtee_open_session() is called before destroy_session() has completed execution, alloc_session() may return 'sess' that will be freed up later in destroy_session() leading to use-after-free in amdtee_open_session. To fix this issue, treat decrement of sess->refcount and removal of 'sess' from session list in destroy_session() as a critical section, so that it is executed atomically. Fixes: 757cc3e9ff1d ("tee: add AMD-TEE driver") Cc: stable@vger.kernel.org Signed-off-by: Rijo Thomas <Rijo-john.Thomas@amd.com> Reviewed-by: Sumit Garg <sumit.garg@linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-20Input: goodix - ensure int GPIO is in input for gpio_count == 1 && ↵Hans de Goede1-0/+19
gpio_int_idx == 0 case commit 423622a90abb243944d1517b9f57db53729e45c4 upstream. Add a special case for gpio_count == 1 && gpio_int_idx == 0 to goodix_add_acpi_gpio_mappings(). It seems that on newer x86/ACPI devices the reset and irq GPIOs are no longer listed as GPIO resources instead there is only 1 GpioInt resource and _PS0 does the whole reset sequence for us. This means that we must call acpi_device_fix_up_power() on these devices to ensure that the chip is reset before we try to use it. This part was already fixed in commit 3de93e6ed2df ("Input: goodix - call acpi_device_fix_up_power() in some cases") by adding a call to acpi_device_fix_up_power() to the generic "Unexpected ACPI resources" catch all. But it turns out that this case on some hw needs some more special handling. Specifically the firmware may bootup with the IRQ pin in output mode. The reset sequence from ACPI _PS0 (executed by acpi_device_fix_up_power()) should put the pin in input mode, but the GPIO subsystem has cached the direction at bootup, causing request_irq() to fail due to gpiochip_lock_as_irq() failure: [ 9.119864] Goodix-TS i2c-GDIX1002:00: Unexpected ACPI resources: gpio_count 1, gpio_int_idx 0 [ 9.317443] Goodix-TS i2c-GDIX1002:00: ID 911, version: 1060 [ 9.321902] input: Goodix Capacitive TouchScreen as /devices/pci0000:00/0000:00:17.0/i2c_designware.4/i2c-5/i2c-GDIX1002:00/input/input8 [ 9.327840] gpio gpiochip0: (INT3453:00): gpiochip_lock_as_irq: tried to flag a GPIO set as output for IRQ [ 9.327856] gpio gpiochip0: (INT3453:00): unable to lock HW IRQ 26 for IRQ [ 9.327861] genirq: Failed to request resources for GDIX1002:00 (irq 131) on irqchip intel-gpio [ 9.327912] Goodix-TS i2c-GDIX1002:00: request IRQ failed: -5 Fix this by adding a special case for gpio_count == 1 && gpio_int_idx == 0 which adds an ACPI GPIO lookup table for the int GPIO even though we cannot use it for reset purposes (as there is no reset GPIO). Adding the lookup will make the gpiod_int = gpiod_get(..., GPIOD_IN) call succeed, which will explicitly set the direction to input fixing the issue. Note this re-uses the acpi_goodix_int_first_gpios[] lookup table, since there is only 1 GPIO in the ACPI resources the reset entry in that lookup table will amount to a no-op. Reported-and-tested-by: Michael Smith <1973.mjsmith@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20231003215144.69527-1-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-20Input: i8042 - add Fujitsu Lifebook E5411 to i8042 quirk tableSzilard Fabian1-0/+8
commit 80f39e1c27ba9e5a1ea7e68e21c569c9d8e46062 upstream. In the initial boot stage the integrated keyboard of Fujitsu Lifebook E5411 refuses to work and it's not possible to type for example a dm-crypt passphrase without the help of an external keyboard. i8042.nomux kernel parameter resolves this issue but using that a PS/2 mouse is detected. This input device is unused even when the i2c-hid-acpi kernel module is blacklisted making the integrated ELAN touchpad (04F3:308A) not working at all. Since the integrated touchpad is managed by the i2c_designware input driver in the Linux kernel and you can't find a PS/2 mouse port on the computer I think it's safe to not use the PS/2 mouse port at all. Signed-off-by: Szilard Fabian <szfabian@bluemarch.art> Link: https://lore.kernel.org/r/20231004011749.101789-1-szfabian@bluemarch.art Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-20Input: xpad - add PXN V900 supportMatthias Berndt1-0/+2
commit a65cd7ef5a864bdbbe037267c327786b7759d4c6 upstream. Add VID and PID to the xpad_device table to allow driver to use the PXN V900 steering wheel, which is XTYPE_XBOX360 compatible in xinput mode. Signed-off-by: Matthias Berndt <matthias_berndt@gmx.de> Link: https://lore.kernel.org/r/4932699.31r3eYUQgx@fedora Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-20Input: psmouse - fix fast_reconnect function for PS/2 modeJeffery Miller2-0/+2
commit e2cb5cc822b6c9ee72c56ce1d81671b22c05406a upstream. When the SMBus connection is attempted psmouse_smbus_init() sets the fast_reconnect pointer to psmouse_smbus_reconnecti(). If SMBus initialization fails, elantech_setup_ps2() and synaptics_init_ps2() will fallback to PS/2 mode, replacing the psmouse private data. This can cause issues on resume, since psmouse_smbus_reconnect() expects to find an instance of struct psmouse_smbus_dev in psmouse->private. The issue was uncovered when in 92e24e0e57f7 ("Input: psmouse - add delay when deactivating for SMBus mode") psmouse_smbus_reconnect() started attempting to use more of the data structure. The commit was since reverted, not because it was at fault, but because there was found a better way of doing what it was attempting to do. Fix the problem by resetting the fast_reconnect pointer in psmouse structure in elantech_setup_ps2() and synaptics_init_ps2() when the PS/2 mode is used. Reported-by: Thorsten Leemhuis <linux@leemhuis.info> Tested-by: Thorsten Leemhuis <linux@leemhuis.info> Signed-off-by: Jeffery Miller <jefferymiller@google.com> Fixes: bf232e460a35 ("Input: psmouse-smbus - allow to control psmouse_deactivate") Link: https://lore.kernel.org/r/20231005002249.554877-1-jefferymiller@google.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-20Input: powermate - fix use-after-free in powermate_config_completeJavier Carrasco1-0/+1
commit 5c15c60e7be615f05a45cd905093a54b11f461bc upstream. syzbot has found a use-after-free bug [1] in the powermate driver. This happens when the device is disconnected, which leads to a memory free from the powermate_device struct. When an asynchronous control message completes after the kfree and its callback is invoked, the lock does not exist anymore and hence the bug. Use usb_kill_urb() on pm->config to cancel any in-progress requests upon device disconnection. [1] https://syzkaller.appspot.com/bug?extid=0434ac83f907a1dbdd1e Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Reported-by: syzbot+0434ac83f907a1dbdd1e@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/20230916-topic-powermate_use_after_free-v3-1-64412b81a7a2@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-20thunderbolt: Restart XDomain discovery handshake after failureMika Westerberg1-17/+41
commit 308092d080852f8997126e5b3507536162416f4a upstream. Alex reported that after rebooting the other host the peer-to-peer link does not come up anymore. The reason for this is that the host that was not rebooted tries to send the UUID request only 10 times according to the USB4 Inter-Domain spec and gives up if it does not get reply. Then when the other side is actually ready it cannot get the link established anymore. The USB4 Inter-Domain spec requires that the discovery protocol is restarted in that case so implement this now. Reported-by: Alex Balcanquall <alex@alexbal.com> Fixes: 8e1de7042596 ("thunderbolt: Add support for XDomain lane bonding") Cc: stable@vger.kernel.org Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-20thunderbolt: Check that lane 1 is in CL0 before enabling lane bondingMika Westerberg1-0/+7
commit a9fdf5f933a6f2b358fad0194b1287b67f6704b1 upstream. Marek reported that when BlackMagic UltraStudio device is connected the kernel repeatedly tries to enable lane bonding without success making the device non-functional. It looks like the device does not have lane 1 connected at all so even though it is enabled we should not try to bond the lanes. For this reason check that lane 1 is in fact CL0 (connected, active) before attempting to bond the lanes. Reported-by: Marek Šanta <teslan223@gmail.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217737 Cc: stable@vger.kernel.org Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-20thunderbolt: Workaround an IOMMU fault on certain systems with Intel Maple RidgeMika Westerberg1-20/+20
commit 582620d9f6b352552bc9a3316fe2b1c3acd8742d upstream. On some systems the IOMMU blocks the first couple of driver ready messages to the connection manager firmware as can be seen in below excerpts: thunderbolt 0000:06:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0010 address=0xbb0e3400 flags=0x0020] or DMAR: DRHD: handling fault status reg 2 DMAR: [DMA Write] Request device [04:00.0] PASID ffffffff fault addr 69974000 [fault reason 05] PTE Write access is not set The reason is unknown and hard to debug because we were not able to reproduce this locally. This only happens on certain systems with Intel Maple Ridge Thunderbolt controller. If there is a device connected when the driver is loaded the issue does not happen either. Only when there is nothing connected (so typically when the system is booted up). We can work this around by sending the driver ready several times. After a couple of retries the message goes through and the controller works just fine. For this reason make the number of retries a parameter for icm_request() and then for Maple Ridge (and Titan Ridge as they us the same function but this should not matter) increase number of retries while shortening the timeout accordingly. Reported-by: Werner Sembach <wse@tuxedocomputers.com> Reported-by: Konrad J Hambrick <kjhambrick@gmail.com> Reported-by: Calvin Walton <calvin.walton@kepstin.ca> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=214259 Cc: stable@vger.kernel.org Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-20mcb: remove is_added flag from mcb_device structJorge Sanjuan Garcia2-9/+3
commit 0f28ada1fbf0054557cddcdb93ad17f767105208 upstream. When calling mcb_bus_add_devices(), both mcb devices and the mcb bus will attempt to attach a device to a driver because they share the same bus_type. This causes an issue when trying to cast the container of the device to mcb_device struct using to_mcb_device(), leading to a wrong cast when the mcb_bus is added. A crash occurs when freing the ida resources as the bus numbering of mcb_bus gets confused with the is_added flag on the mcb_device struct. The only reason for this cast was to keep an is_added flag on the mcb_device struct that does not seem necessary. The function device_attach() handles already bound devices and the mcb subsystem does nothing special with this is_added flag so remove it completely. Fixes: 18d288198099 ("mcb: Correctly initialize the bus's device") Cc: stable <stable@kernel.org> Signed-off-by: Jorge Sanjuan Garcia <jorge.sanjuangarcia@duagon.com> Co-developed-by: Jose Javier Rodriguez Barbarin <JoseJavier.Rodriguez@duagon.com> Signed-off-by: Jose Javier Rodriguez Barbarin <JoseJavier.Rodriguez@duagon.com> Link: https://lore.kernel.org/r/20230906114901.63174-2-JoseJavier.Rodriguez@duagon.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-20ACPI: EC: Add quirk for the HP Pavilion Gaming 15-dk1xxxHans de Goede1-0/+11
commit cd4aece493f99f95d41edcce32927d70a5dde923 upstream. Added GPE quirk entry for the HP Pavilion Gaming 15-dk1xxx. There is a quirk entry for 2 15-c..... laptops, this is for a new version which has 15-dk1xxx as identifier. This fixes the LID switch and rfkill and brightness hotkeys not working. Closes: https://github.com/systemd/systemd/issues/28942 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-20ACPI: resource: Skip IRQ override on ASUS ExpertBook B1402CBAHans de Goede1-0/+7
commit c1ed72171ed580fbf159e703b77685aa4b0d0df5 upstream. Like various other ASUS ExpertBook-s, the ASUS ExpertBook B1402CBA has an ACPI DSDT table that describes IRQ 1 as ActiveLow while the kernel overrides it to EdgeHigh. This prevents the keyboard from working. To fix this issue, add this laptop to the skip_override_table so that the kernel does not override IRQ 1. Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217901 Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-20drm/amd/display: Don't set dpms_off for seamless bootDaniel Miess1-0/+3
commit 23645bca98304a2772f0de96f97370dd567d0ae6 upstream. [Why] eDPs fail to light up with seamless boot enabled [How] When seamless boot is enabled don't configure dpms_off in disable_vbios_mode_if_required. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Daniel Miess <daniel.miess@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-20drm/amdgpu: add missing NULL checkChristian König1-1/+1
commit ff89f064dca38e2203790bf876cc7756b8ab2961 upstream. bo->tbo.resource can easily be NULL here. Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2902 Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> CC: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-20drm/atomic-helper: relax unregistered connector checkSimon Ser1-4/+13
commit 2b7947bd32e243c52870d54141d3b4ea6775e63d upstream. The driver might pull connectors which weren't submitted by user-space into the atomic state. For instance, intel_dp_mst_atomic_master_trans_check() pulls in connectors sharing the same DP-MST stream. However, if the connector is unregistered, this later fails with: [ 559.425658] i915 0000:00:02.0: [drm:drm_atomic_helper_check_modeset] [CONNECTOR:378:DP-7] is not registered Skip the unregistered connector check to allow user-space to turn off connectors one-by-one. See this wlroots issue: https://gitlab.freedesktop.org/wlroots/wlroots/-/issues/3407 Previous discussion: https://lore.kernel.org/intel-gfx/Y6GX7z17WmDSKwta@ideak-desk.fi.intel.com/ Signed-off-by: Simon Ser <contact@emersion.fr> Cc: stable@vger.kernel.org Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231005131623.114379-1-contact@emersion.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-20iio: addac: Kconfig: update ad74413r selectionsAntoniu Miclaus1-0/+2
commit b120dd3a15582fb7a959cecb05e4d9814fcba386 upstream. Building ad74413r without selecting IIO_BUFFER and IIO_TRIGGERED_BUFFER generates error with respect to the iio trigger functions that are used within the driver. Update the Kconfig accordingly. Fixes: fea251b6a5db ("iio: addac: add AD74413R driver") Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com> Link: https://lore.kernel.org/r/20230912085421.51102-1-antoniu.miclaus@analog.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-20iio: pressure: ms5611: ms5611_prom_is_valid false negative bugAlexander Zangerl1-1/+1
commit fd39d9668f2ce9f4b05ad55e8c8d80c098073e0b upstream. The ms5611 driver falsely rejects lots of MS5607-02BA03-50 chips with "PROM integrity check failed" because it doesn't accept a prom crc value of zero as legitimate. According to the datasheet for this chip (and the manufacturer's application note about the PROM CRC), none of the possible values for the CRC are excluded - but the current code in ms5611_prom_is_valid() ends with return crc_orig != 0x0000 && crc == crc_orig Discussed with the driver author (Tomasz Duszynski) and he indicated that at that time (2015) he was dealing with some faulty chip samples which returned blank data under some circumstances and/or followed example code which indicated CRC zero being bad. As far as I can tell this exception should not be applied anymore; We've got a few hundred custom boards here with this chip where large numbers of the prom have a legitimate CRC value 0, and do work fine, but which the current driver code wrongly rejects. Signed-off-by: Alexander Zangerl <az@breathe-safe.com> Fixes: c0644160a8b5 ("iio: pressure: add support for MS5611 pressure and temperature sensor") Link: https://lore.kernel.org/r/2535-1695168070.831792@Ze3y.dhYT.s3fx Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-20iio: pressure: dps310: Adjust Timeout SettingsLakshmi Yadlapati1-4/+4
commit 901a293fd96fb9bab843ba4cc7be3094a5aa7c94 upstream. The DPS310 sensor chip has been encountering intermittent errors while reading the sensor device across various system designs. This issue causes the chip to become "stuck," preventing the indication of "ready" status for pressure and temperature measurements in the MEAS_CFG register. To address this issue, this commit fixes the timeout settings to improve sensor stability: - After sending a reset command to the chip, the timeout has been extended from 2.5 ms to 15 ms, aligning with the DPS310 specification. - The read timeout value of the MEAS_CFG register has been adjusted from 20ms to 30ms to match the specification. Signed-off-by: Lakshmi Yadlapati <lakshmiy@us.ibm.com> Fixes: 7b4ab4abcea4 ("iio: pressure: dps310: Reset chip after timeout") Link: https://lore.kernel.org/r/20230829180222.3431926-2-lakshmiy@us.ibm.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-20iio: admv1013: add mixer_vgate corner casesAntoniu Miclaus1-2/+2
commit 287d998af24326b009ae0956820a3188501b34a0 upstream. Include the corner cases in the computation of the MIXER_VGATE register value. According to the datasheet: The MIXER_VGATE values follows the VCM such as, that for a 0V to 1.8V VCM, MIXER_VGATE = 23.89 VCM + 81, and for a > 1.8V to 2.6V VCM, MIXER_VGATE = 23.75 VCM + 1.25. Fixes: da35a7b526d9 ("iio: frequency: admv1013: add support for ADMV1013") Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com> Reviewed-by: Nuno Sa <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20230807143806.6954-1-antoniu.miclaus@analog.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-20iio: dac: ad3552r: Correct device IDsMarcelo Schmitt1-2/+2
commit 9a85653ed3b9a9b7b31d95a34b64b990c3d33ca1 upstream. Device IDs for AD3542R and AD3552R were swapped leading to unintended collection of DAC output ranges being used for each design. Change device ID values so they are correct for each DAC chip. Fixes: 8f2b54824b28 ("drivers:iio:dac: Add AD3552R driver support") Signed-off-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com> Reported-by: Chandrakant Minajigi <Chandrakant.Minajigi@analog.com> Link: https://lore.kernel.org/r/011f480220799fbfabdd53896f8a2f251ad995ad.1691091324.git.marcelo.schmitt1@gmail.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-20iio: adc: imx8qxp: Fix address for command buffer registersPhilipp Rossak1-2/+2
commit 850101b3598277794f92a9e363a60a66e0d42890 upstream. The ADC Command Buffer Register high and low are currently pointing to the wrong address and makes it impossible to perform correct ADC measurements over all channels. According to the datasheet of the imx8qxp the ADC_CMDL register starts at address 0x100 and the ADC_CMDH register starts at address 0x104. This bug seems to be in the kernel since the introduction of this driver. This can be observed by checking all raw voltages of the adc and they are all nearly identical: cat /sys/bus/iio/devices/iio\:device0/in_voltage*_raw 3498 3494 3491 3491 3489 3490 3490 3490 Fixes: 1e23dcaa1a9fa ("iio: imx8qxp-adc: Add driver support for NXP IMX8QXP ADC") Signed-off-by: Philipp Rossak <embed3d@gmail.com> Acked-by: Haibo Chen <haibo.chen@nxp.com> Link: https://lore.kernel.org/r/20230904220204.23841-1-embed3d@gmail.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-20iio: imu: bno055: Fix missing Kconfig dependenciesJonathan Cameron1-0/+2
commit c9b9cfe7d342683f624a89c3b617be18aff879e8 upstream. This driver uses IIO triggered buffers so it needs to select them in Kconfig. on riscv-32bit: /opt/crosstool/gcc-13.2.0-nolibc/riscv32-linux/bin/riscv32-linux-ld: drivers/iio/imu/bno055/bno055.o: in function `.L367': bno055.c:(.text+0x2c96): undefined reference to `devm_iio_triggered_buffer_setup_ext' Reported-by: Randy Dunlap <rdunlap@infradead.org> Closes: https://lore.kernel.org/linux-next/40566b4b-3950-81fe-ff14-871d8c447627@infradead.org/ Fixes: 4aefe1c2bd0c ("iio: imu: add Bosch Sensortec BNO055 core driver") Cc: Andrea Merello <andrea.merello@iit.it> Acked-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20230903113052.846298-1-jic23@kernel.org Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-20iio: pressure: bmp280: Fix NULL pointer exceptionPhil Elwell1-1/+1
commit 85dfb43bf69281adb1f345dfd9a39faf2e5a718d upstream. The bmp085 EOC IRQ support is optional, but the driver's common probe function queries the IRQ properties whether or not it exists, which can trigger a NULL pointer exception. Avoid any exception by making the query conditional on the possession of a valid IRQ. Fixes: aae953949651 ("iio: pressure: bmp280: add support for BMP085 EOC interrupt") Signed-off-by: Phil Elwell <phil@raspberrypi.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20230811155829.51208-1-phil@raspberrypi.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-20usb: musb: Modify the "HWVers" register addressXingxing Luo1-1/+1
commit 6658a62e1ddf726483cb2d8bf45ea3f9bd533074 upstream. musb HWVers rgister address is not 0x69, if we operate the wrong address 0x69, it will cause a kernel crash, because there is no register corresponding to this address in the additional control register of musb. In fact, HWVers has been defined in musb_register.h, and the name is "MUSB_HWVERS", so We need to use this macro instead of 0x69. Fixes: c2365ce5d5a0 ("usb: musb: replace hard coded registers with defines") Cc: stable@vger.kernel.org Signed-off-by: Xingxing Luo <xingxing.luo@unisoc.com> Link: https://lore.kernel.org/r/20230922075929.31074-1-xingxing.luo@unisoc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-20usb: musb: Get the musb_qh poniter after musb_givebackXingxing Luo1-1/+8
commit 33d7e37232155aadebe4145dcc592f00dabd7a2b upstream. When multiple threads are performing USB transmission, musb->lock will be unlocked when musb_giveback is executed. At this time, qh may be released in the dequeue process in other threads, resulting in a wild pointer, so it needs to be here get qh again, and judge whether qh is NULL, and when dequeue, you need to set qh to NULL. Fixes: dbac5d07d13e ("usb: musb: host: don't start next rx urb if current one failed") Cc: stable@vger.kernel.org Signed-off-by: Xingxing Luo <xingxing.luo@unisoc.com> Link: https://lore.kernel.org/r/20230919033055.14085-1-xingxing.luo@unisoc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-20usb: hub: Guard against accesses to uninitialized BOS descriptorsRicardo Cañuelo2-4/+23
commit f74a7afc224acd5e922c7a2e52244d891bbe44ee upstream. Many functions in drivers/usb/core/hub.c and drivers/usb/core/hub.h access fields inside udev->bos without checking if it was allocated and initialized. If usb_get_bos_descriptor() fails for whatever reason, udev->bos will be NULL and those accesses will result in a crash: BUG: kernel NULL pointer dereference, address: 0000000000000018 PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 5 PID: 17818 Comm: kworker/5:1 Tainted: G W 5.15.108-18910-gab0e1cb584e1 #1 <HASH:1f9e 1> Hardware name: Google Kindred/Kindred, BIOS Google_Kindred.12672.413.0 02/03/2021 Workqueue: usb_hub_wq hub_event RIP: 0010:hub_port_reset+0x193/0x788 Code: 89 f7 e8 20 f7 15 00 48 8b 43 08 80 b8 96 03 00 00 03 75 36 0f b7 88 92 03 00 00 81 f9 10 03 00 00 72 27 48 8b 80 a8 03 00 00 <48> 83 78 18 00 74 19 48 89 df 48 8b 75 b0 ba 02 00 00 00 4c 89 e9 RSP: 0018:ffffab740c53fcf8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffffa1bc5f678000 RCX: 0000000000000310 RDX: fffffffffffffdff RSI: 0000000000000286 RDI: ffffa1be9655b840 RBP: ffffab740c53fd70 R08: 00001b7d5edaa20c R09: ffffffffb005e060 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 R13: ffffab740c53fd3e R14: 0000000000000032 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffffa1be96540000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000018 CR3: 000000022e80c005 CR4: 00000000003706e0 Call Trace: hub_event+0x73f/0x156e ? hub_activate+0x5b7/0x68f process_one_work+0x1a2/0x487 worker_thread+0x11a/0x288 kthread+0x13a/0x152 ? process_one_work+0x487/0x487 ? kthread_associate_blkcg+0x70/0x70 ret_from_fork+0x1f/0x30 Fall back to a default behavior if the BOS descriptor isn't accessible and skip all the functionalities that depend on it: LPM support checks, Super Speed capabilitiy checks, U1/U2 states setup. Signed-off-by: Ricardo Cañuelo <ricardo.canuelo@collabora.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20230830100418.1952143-1-ricardo.canuelo@collabora.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-20usb: cdns3: Modify the return value of cdns_set_active () to void when ↵Xiaolei Wang1-2/+1
CONFIG_PM_SLEEP is disabled commit 9f35d612da5592f1bf1cae44ec1e023df37bea12 upstream. The return type of cdns_set_active () is inconsistent depending on whether CONFIG_PM_SLEEP is enabled, so the return value is modified to void type. Reported-by: Pavel Machek <pavel@denx.de> Closes: https://lore.kernel.org/all/ZP7lIKUzD68XA91j@duo.ucw.cz/ Fixes: 2319b9c87fe2 ("usb: cdns3: Put the cdns set active part outside the spin lock") Cc: stable@vger.kernel.org Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com> Reviewed-by: Pavel Machek <pavel@denx.de> Reviewed-by: Roger Quadros <rogerq@kernel.org> Acked-by: Peter Chen <peter.chen@kernel.org> Link: https://lore.kernel.org/r/20230926075333.1791011-1-xiaolei.wang@windriver.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-20usb: dwc3: Soft reset phy on probe for hostThinh Nguyen1-1/+38
commit 8bea147dfdf823eaa8d3baeccc7aeb041b41944b upstream. When there's phy initialization, we need to initiate a soft-reset sequence. That's done through USBCMD.HCRST in the xHCI driver and its initialization, However, the dwc3 driver may modify core configs before the soft-reset. This may result in some connection instability. So, ensure the phy is ready before the controller updates the GCTL.PRTCAPDIR or other settings by issuing phy soft-reset. Note that some host-mode configurations may not expose device registers to initiate the controller soft-reset (via DCTL.CoreSftRst). So we reset through GUSB3PIPECTL and GUSB2PHYCFG instead. Cc: stable@vger.kernel.org Fixes: e835c0a4e23c ("usb: dwc3: don't reset device side if dwc3 was configured as host-only") Reported-by: Kenta Sato <tosainu.maple@gmail.com> Closes: https://lore.kernel.org/linux-usb/ZPUciRLUcjDywMVS@debian.me/ Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Tested-by: Kenta Sato <tosainu.maple@gmail.com> Link: https://lore.kernel.org/r/70aea513215d273669152696cc02b20ddcdb6f1a.1694564261.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-20net: usb: dm9601: fix uninitialized variable use in dm9601_mdio_readJavier Carrasco1-1/+6
commit 8f8abb863fa5a4cc18955c6a0e17af0ded3e4a76 upstream. syzbot has found an uninit-value bug triggered by the dm9601 driver [1]. This error happens because the variable res is not updated if the call to dm_read_shared_word returns an error. In this particular case -EPROTO was returned and res stayed uninitialized. This can be avoided by checking the return value of dm_read_shared_word and propagating the error if the read operation failed. [1] https://syzkaller.appspot.com/bug?extid=1f53a30781af65d2c955 Cc: stable@vger.kernel.org Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Reported-and-tested-by: syzbot+1f53a30781af65d2c955@syzkaller.appspotmail.com Acked-by: Peter Korsgaard <peter@korsgaard.com> Fixes: d0374f4f9c35cdfbee0 ("USB: Davicom DM9601 usbnet driver") Link: https://lore.kernel.org/r/20231009-topic-dm9601_uninit_mdio_read-v2-1-f2fe39739b6c@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-20usb: xhci: xhci-ring: Use sysdev for mapping bounce bufferWesley Cheng1-2/+2
commit 41a43013d2366db5b88b42bbcd8e8f040b6ccf21 upstream. As mentioned in: commit 474ed23a6257 ("xhci: align the last trb before link if it is easily splittable.") A bounce buffer is utilized for ensuring that transfers that span across ring segments are aligned to the EP's max packet size. However, the device that is used to map the DMA buffer to is currently using the XHCI HCD, which does not carry any DMA operations in certain configrations. Migration to using the sysdev entry was introduced for DWC3 based implementations where the IOMMU operations are present. Replace the reference to the controller device to sysdev instead. This allows the bounce buffer to be properly mapped to any implementations that have an IOMMU involved. cc: stable@vger.kernel.org Fixes: 4c39d4b949d3 ("usb: xhci: use bus->sysdev for DMA configuration") Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20230915143108.1532163-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-20dmaengine: stm32-mdma: set in_flight_bytes in case CRQA flag is setAmelie Delaunay1-5/+9
commit 584970421725b7805db84714b857851fdf7203a9 upstream. CRQA flag is set by hardware when the channel request become active and the channel is enabled. It is cleared by hardware, when the channel request is completed. So when it is set, it means MDMA is transferring bytes. This information is useful in case of STM32 DMA and MDMA chaining, especially when the user pauses DMA before stopping it, to trig one last MDMA transfer to get the latest bytes of the SRAM buffer to the destination buffer. STM32 DCMI driver can then use this to know if the last MDMA transfer in case of chaining is done. Fixes: 696874322771 ("dmaengine: stm32-mdma: add support to be triggered by STM32 DMA") Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20231004163531.2864160-3-amelie.delaunay@foss.st.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-20dmaengine: stm32-mdma: use Link Address Register to compute residueAmelie Delaunay1-4/+11
commit a4b306eb83579c07b63dc65cd5bae53b7b4019d0 upstream. Current implementation relies on curr_hwdesc index. But to keep this index up to date, Block Transfer interrupt (BTIE) has to be enabled. If it is not, curr_hwdesc is not updated, and then residue is not reliable. Rely on Link Address Register instead. And disable BTIE interrupt in stm32_mdma_setup_xfer() because it is no more needed in case of _prep_slave_sg() to maintain curr_hwdesc up to date. It avoids extra interrupts and also ensures a reliable residue. These improvements are required for STM32 DCMI camera capture use case, which need STM32 DMA and MDMA chaining for good performance. Fixes: 696874322771 ("dmaengine: stm32-mdma: add support to be triggered by STM32 DMA") Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20231004163531.2864160-2-amelie.delaunay@foss.st.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-20dmaengine: stm32-dma: fix residue in case of MDMA chainingAmelie Delaunay1-3/+4
commit 67e13e89742c3b21ce177f612bf9ef32caae6047 upstream. In case of MDMA chaining, DMA is configured in Double-Buffer Mode (DBM) with two periods, but if transfer has been prepared with _prep_slave_sg(), the transfer is not marked cyclic (=!chan->desc->cyclic). However, as DBM is activated for MDMA chaining, residue computation must take into account cyclic constraints. With only two periods in MDMA chaining, and no update due to Transfer Complete interrupt masked, n_sg is always 0. If DMA current memory address (depending on SxCR.CT and SxM0AR/SxM1AR) does not correspond, it means n_sg should be increased. Then, the residue of the current period is the one read from SxNDTR and should not be overwritten with the full period length. Fixes: 723795173ce1 ("dmaengine: stm32-dma: add support to trigger STM32 MDMA") Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20231004155024.2609531-2-amelie.delaunay@foss.st.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-20dmaengine: stm32-dma: fix stm32_dma_prep_slave_sg in case of MDMA chainingAmelie Delaunay1-1/+3
commit 2df467e908ce463cff1431ca1b00f650f7a514b4 upstream. Current Target (CT) have to be reset when starting an MDMA chaining use case, as Double Buffer mode is activated. It ensures the DMA will start processing the first memory target (pointed with SxM0AR). Fixes: 723795173ce1 ("dmaengine: stm32-dma: add support to trigger STM32 MDMA") Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20231004155024.2609531-1-amelie.delaunay@foss.st.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-20dmaengine: stm32-mdma: abort resume if no ongoing transferAmelie Delaunay1-0/+4
commit 81337b9a72dc58a5fa0ae8a042e8cb59f9bdec4a upstream. chan->desc can be null, if transfer is terminated when resume is called, leading to a NULL pointer when retrieving the hwdesc. To avoid this case, check that chan->desc is not null and channel is disabled (transfer previously paused or terminated). Fixes: a4ffb13c8946 ("dmaengine: Add STM32 MDMA driver") Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20231004163531.2864160-1-amelie.delaunay@foss.st.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-20pinctrl: renesas: rzn1: Enable missing PINMUXRalph Siemsen1-0/+1
[ Upstream commit f055ff23c331f28aa4ace4b72dc56f63b9a726c8 ] Enable pin muxing (eg. programmable function), so that the RZ/N1 GPIO pins will be configured as specified by the pinmux in the DTS. This used to be enabled implicitly via CONFIG_GENERIC_PINMUX_FUNCTIONS, however that was removed, since the RZ/N1 driver does not call any of the generic pinmux functions. Fixes: 1308fb4e4eae14e6 ("pinctrl: rzn1: Do not select GENERIC_PIN{CTRL_GROUPS,MUX_FUNCTIONS}") Signed-off-by: Ralph Siemsen <ralph.siemsen@linaro.org> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20231004200008.1306798-1-ralph.siemsen@linaro.org Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2026-05-11 12:51:58 +0300