| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
commit 2820433be2a33beb44b13b367e155cf221f29610 upstream.
[Why & How]
In the commit 32953485c558 ("drm/amd/display: Do not update DRR while
BW optimizations pending"), a modification was added to avoid adjusting
DRR if optimized bandwidth is set. This change was only intended for
DCN, but one part of the patch changed the code path for DCE devices and
caused regressions to the kms_vrr test. To address this problem, this
commit adds a modification in which dc_stream_adjust_vmin_vmax will be
fully executed in DCE devices.
Fixes: 32953485c558 ("drm/amd/display: Do not update DRR while BW optimizations pending")
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a2b308044dcaca8d3e580959a4f867a1d5c37fac upstream.
None have been defined yet, so reject anybody setting any. Mesa sets
it to 0 anyway.
Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0e96647cff9224db564a1cee6efccb13dbe11ee2 upstream.
The conversion to proc_create_single_data() introduced a regression
whereby reading a file in /proc/bus/nubus results in a seg fault:
# grep -r . /proc/bus/nubus/e/
Data read fault at 0x00000020 in Super Data (pc=0x1074c2)
BAD KERNEL BUSERR
Oops: 00000000
Modules linked in:
PC: [<001074c2>] PDE_DATA+0xc/0x16
SR: 2010 SP: 38284958 a2: 01152370
d0: 00000001 d1: 01013000 d2: 01002790 d3: 00000000
d4: 00000001 d5: 0008ce2e a0: 00000000 a1: 00222a40
Process grep (pid: 45, task=142f8727)
Frame format=B ssw=074d isc=2008 isb=4e5e daddr=00000020 dobuf=01199e70
baddr=001074c8 dibuf=ffffffff ver=f
Stack from 01199e48:
01199e70 00222a58 01002790 00000000 011a3000 01199eb0 015000c0 00000000
00000000 01199ec0 01199ec0 000d551a 011a3000 00000001 00000000 00018000
d003f000 00000003 00000001 0002800d 01052840 01199fa8 c01f8000 00000000
00000029 0b532b80 00000000 00000000 00000029 0b532b80 01199ee4 00103640
011198c0 d003f000 00018000 01199fa8 00000000 011198c0 00000000 01199f4c
000b3344 011198c0 d003f000 00018000 01199fa8 00000000 00018000 011198c0
Call Trace: [<00222a58>] nubus_proc_rsrc_show+0x18/0xa0
[<000d551a>] seq_read+0xc4/0x510
[<00018000>] fp_fcos+0x2/0x82
[<0002800d>] __sys_setreuid+0x115/0x1c6
[<00103640>] proc_reg_read+0x5c/0xb0
[<00018000>] fp_fcos+0x2/0x82
[<000b3344>] __vfs_read+0x2c/0x13c
[<00018000>] fp_fcos+0x2/0x82
[<00018000>] fp_fcos+0x2/0x82
[<000b8aa2>] sys_statx+0x60/0x7e
[<000b34b6>] vfs_read+0x62/0x12a
[<00018000>] fp_fcos+0x2/0x82
[<00018000>] fp_fcos+0x2/0x82
[<000b39c2>] ksys_read+0x48/0xbe
[<00018000>] fp_fcos+0x2/0x82
[<000b3a4e>] sys_read+0x16/0x1a
[<00018000>] fp_fcos+0x2/0x82
[<00002b84>] syscall+0x8/0xc
[<00018000>] fp_fcos+0x2/0x82
[<0000c016>] not_ext+0xa/0x18
Code: 4e5e 4e75 4e56 0000 206e 0008 2068 ffe8 <2068> 0020 2008 4e5e 4e75 4e56 0000 2f0b 206e 0008 2068 0004 2668 0020 206b ffe8
Disabling lock debugging due to kernel taint
Segmentation fault
The proc_create_single_data() conversion does not work because
single_open(file, nubus_proc_rsrc_show, PDE_DATA(inode)) is not
equivalent to the original code.
Fixes: 3f3942aca6da ("proc: introduce proc_create_single{,_data}")
Cc: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org # 5.6+
Signed-off-by: Finn Thain <fthain@linux-m68k.org>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/d4e2a586e793cc8d9442595684ab8a077c0fe726.1678783919.git.fthain@linux-m68k.org
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 112a7f9c8edbf76f7cb83856a6cb6b60a210b659 upstream.
ACPI r6.5, sec 6.5.4, describes how AML is unable to access an
OperationRegion unless _REG has been called to connect a handler:
The OS runs _REG control methods to inform AML code of a change in the
availability of an operation region. When an operation region handler is
unavailable, AML cannot access data fields in that region. (Operation
region writes will be ignored and reads will return indeterminate data.)
The PCI core does not call _REG at any time, leading to the undefined
behavior mentioned in the spec.
The spec explains that _REG should be executed to indicate whether a
given region can be accessed:
Once _REG has been executed for a particular operation region, indicating
that the operation region handler is ready, a control method can access
fields in the operation region. Conversely, control methods must not
access fields in operation regions when _REG method execution has not
indicated that the operation region handler is ready.
An example included in the spec demonstrates calling _REG when devices are
turned off: "when the host controller or bridge controller is turned off
or disabled, PCI Config Space Operation Regions for child devices are
no longer available. As such, ETH0’s _REG method will be run when it
is turned off and will again be run when PCI1 is turned off."
It is reported that ASMedia PCIe GPIO controllers fail functional tests
after the system has returning from suspend (S3 or s2idle). This is because
the BIOS checks whether the OSPM has called the _REG method to determine
whether it can interact with the OperationRegion assigned to the device as
part of the other AML called for the device.
To fix this issue, call acpi_evaluate_reg() when devices are transitioning
to D3cold or D0.
[bhelgaas: split pci_power_t checking to preliminary patch]
Link: https://uefi.org/specs/ACPI/6.5/06_Device_Configuration.html#reg-region
Link: https://lore.kernel.org/r/20230620140451.21007-1-mario.limonciello@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5557b62634abbd55bab7b154ce4bca348ad7f96f upstream.
Previously acpi_pci_set_power_state() assumed the requested power state was
valid (PCI_D0 ... PCI_D3cold). If a caller supplied something else, we
could index outside the state_conv[] array and pass junk to
acpi_device_set_power().
Validate the pci_power_t parameter and return -EINVAL if it's invalid.
Link: https://lore.kernel.org/r/20230621222857.GA122930@bhelgaas
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 32953485c558cecf08f33fbfa251e80e44cef981 upstream.
[why]
While bandwidth optimizations are pending, it's possible a pstate change
will occur. During this time, VSYNC handler should not also try to update
DRR parameters causing pstate hang
[how]
Do not adjust DRR if optimize bandwidth is set.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3442f4e0e55555d14b099c17382453fdfd2508d5 upstream.
Optimization caused unexpected regression, so remove for now.
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
in mtk_thermal_probe"
commit 86edac7d3888c715fe3a81bd61f3617ecfe2e1dd upstream.
This reverts commit f05c7b7d9ea9477fcc388476c6f4ade8c66d2d26.
That change was causing a regression in the generic-adc-thermal-probed
bootrr test as reported in the kernelci-results list [1].
A proper rework will take longer, so revert it for now.
[1] https://groups.io/g/kernelci-results/message/42660
Fixes: f05c7b7d9ea9 ("thermal/drivers/mediatek: Use devm_of_iomap to avoid resource leak in mtk_thermal_probe")
Signed-off-by: Ricardo Cañuelo <ricardo.canuelo@collabora.com>
Suggested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230525121811.3360268-1-ricardo.canuelo@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5fe251112646d8626818ea90f7af325bab243efa upstream.
commit 498ba2069035 ("HID: logitech-hidpp: Don't restart communication if
not necessary") put restarting communication behind that flag, and this
was apparently necessary on the T651, but the flag was not set for it.
Fixes: 498ba2069035 ("HID: logitech-hidpp: Don't restart communication if not necessary")
Cc: stable@vger.kernel.org
Signed-off-by: Mike Hommey <mh@glandium.org>
Link: https://lore.kernel.org/r/20230617230957.6mx73th4blv7owqk@glandium.org
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9a6c0e28e215535b2938c61ded54603b4e5814c5 upstream.
Code which interacts with timestamps needs to use the ktime_t type
returned by functions like ktime_get. The int type does not offer
enough space to store these values, and attempting to use it is a
recipe for problems. In this particular case, overflows would occur
when calculating/storing timestamps leading to incorrect values being
reported to userspace. In some cases these bad timestamps cause input
handling in userspace to appear hung.
Link: https://gitlab.freedesktop.org/libinput/libinput/-/issues/901
Fixes: 17d793f3ed53 ("HID: wacom: insert timestamp to packed Bluetooth (BT) events")
CC: stable@vger.kernel.org
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20230608213828.2108-1-jason.gerecke@wacom.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 944ee77dc6ec7b0afd8ec70ffc418b238c92f12b upstream.
The hidraw_open() function increments the hidraw device reference
counter. The counter has no dedicated synchronization mechanism,
resulting in a potential data race when concurrently opening a device.
The race is a regression introduced by commit 8590222e4b02 ("HID:
hidraw: Replace hidraw device table mutex with a rwsem"). While
minors_rwsem is intended to protect the hidraw_table itself, by instead
acquiring the lock for writing, the reference counter is also protected.
This is symmetrical to hidraw_release().
Link: https://github.com/systemd/systemd/issues/27947
Fixes: 8590222e4b02 ("HID: hidraw: Replace hidraw device table mutex with a rwsem")
Cc: stable@vger.kernel.org
Signed-off-by: Ludvig Michaelsson <ludvig.michaelsson@yubico.com>
Link: https://lore.kernel.org/r/20230621-hidraw-race-v1-1-a58e6ac69bab@yubico.com
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c2d22806aecb24e2de55c30a06e5d6eb297d161d upstream.
There is a potential OOB read at fast_imageblit, for
"colortab[(*src >> 4)]" can become a negative value due to
"const char *s = image->data, *src".
This change makes sure the index for colortab always positive
or zero.
Similar commit:
https://patchwork.kernel.org/patch/11746067
Potential bug report:
https://groups.google.com/g/syzkaller-bugs/c/9ubBXKeKXf4/m/k-QXy4UgAAAJ
Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8d7071af890768438c14db6172cc8f9f4d04e184 upstream
This finishes the job of always holding the mmap write lock when
extending the user stack vma, and removes the 'write_locked' argument
from the vm helper functions again.
For some cases, we just avoid expanding the stack at all: drivers and
page pinning really shouldn't be extending any stacks. Let's see if any
strange users really wanted that.
It's worth noting that architectures that weren't converted to the new
lock_mm_and_find_vma() helper function are left using the legacy
"expand_stack()" function, but it has been changed to drop the mmap_lock
and take it for writing while expanding the vma. This makes it fairly
straightforward to convert the remaining architectures.
As a result of dropping and re-taking the lock, the calling conventions
for this function have also changed, since the old vma may no longer be
valid. So it will now return the new vma if successful, and NULL - and
the lock dropped - if the area could not be extended.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[6.1: Patch drivers/iommu/io-pgfault.c instead]
Signed-off-by: Samuel Mendoza-Jonas <samjonas@amazon.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit e69b9bc170c6d93ee375a5cbfd15f74c0fb59bdd ]
Claim clkhi and clklo as integer type to avoid possible calculation
errors caused by data overflow.
Fixes: a55fa9d0e42e ("i2c: imx-lpi2c: add low power i2c bus driver")
Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1f5d2e3bab16369d5d4b4020a25db4ab1f4f082c ]
Fix possible virtqueue used buffers leak and corresponding stuck
in case of temporary -EIO from sendmsg() which is produced by
tun driver while backend device is not up.
In case of no-retriable error and zcopy do not revert upend_idx
to pass packet data (that is update used_idx in corresponding
vhost_zerocopy_signal_used()) as if packet data has been
transferred successfully.
v2: set vq->heads[ubuf->desc].len equal to VHOST_DMA_DONE_LEN
in case of fake successful transmit.
Signed-off-by: Andrey Smetanin <asmetanin@yandex-team.ru>
Message-Id: <20230424204411.24888-1-asmetanin@yandex-team.ru>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Andrey Smetanin <asmetanin@yandex-team.ru>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 376daf317753ccb6b1ecbdece66018f7f6313a7f ]
As is done in the net, iscsi, and vsock vhost support, let the vdpa vqs
know about the features that have been negotiated. This allows vhost
to more safely make decisions based on the features, such as when using
PACKED vs split queues.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230424225031.18947-2-shannon.nelson@amd.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 982b173a6c6d9472730c3116051977e05d17c8c5 ]
Userspace can race to free the gobj(robj converted from), robj should not
be accessed again after drm_gem_object_put, otherwith it will result in
use-after-free.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Min Li <lm0963hack@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 48bfd02569f5db49cc033f259e66d57aa6efc9a3 ]
If it is async, runqueue_node is freed in g2d_runqueue_worker on another
worker thread. So in extreme cases, if g2d_runqueue_worker runs first, and
then executes the following if statement, there will be use-after-free.
Signed-off-by: Min Li <lm0963hack@gmail.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4a059559809fd1ddbf16f847c4d2237309c08edf ]
Fix a wrong error return by dropping an error return.
When vidi driver is remvoed, if ctx->raw_edid isn't same as fake_edid_info
then only what we have to is to free ctx->raw_edid so that driver removing
can work correctly - it's not an error case.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8cfb98196cceec35416041c6b91212d2b99392e4 ]
Memory/pages are not freed, when unloading nullblk driver.
Steps to reproduce issue
1.free -h
total used free shared buff/cache available
Mem: 7.8Gi 260Mi 7.1Gi 3.0Mi 395Mi 7.3Gi
Swap: 0B 0B 0B
2.modprobe null_blk memory_backed=1
3.dd if=/dev/urandom of=/dev/nullb0 oflag=direct bs=1M count=1000
4.modprobe -r null_blk
5.free -h
total used free shared buff/cache available
Mem: 7.8Gi 1.2Gi 6.1Gi 3.0Mi 398Mi 6.3Gi
Swap: 0B 0B 0B
Signed-off-by: Anuj Gupta <anuj20.g@samsung.com>
Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com>
Link: https://lore.kernel.org/r/20230605062354.24785-1-nj.shetty@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7ebfd881abe9e0ea9557b29dab6aa28d294fabb4 ]
Rather than casting pci1xxxx_i2c_shutdown to an incompatible function type,
update the type to match that expected by __devm_add_action.
Reported by clang-16 with W-1:
.../i2c-mchp-pci1xxxx.c:1159:29: error: cast from 'void (*)(struct pci1xxxx_i2c *)' to 'void (*)(void *)' converts to incompatible function type [-Werror,-Wcast-function-type-strict]
ret = devm_add_action(dev, (void (*)(void *))pci1xxxx_i2c_shutdown, i2c);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./include/linux/device.h:251:29: note: expanded from macro 'devm_add_action'
__devm_add_action(release, action, data, #action)
^~~~~~
No functional change intended.
Compile tested only.
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Reviewed-by: Tharun Kumar P<tharunkumar.pasumarthi@microchip.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 99e09b9c0ab43346c52f2787ca4e5c4b1798362e ]
Reverse actions in qcom_swrm_startup() error paths to avoid leaking
stream memory and keeping runtime PM unbalanced.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230517163736.997553-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 700581ede41d029403feec935df4616309696fd7 ]
A BIOS/DMI update seems to have broken some devices, let's add a new
mapping.
Link: https://github.com/thesofproject/linux/issues/4323
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230515074859.3097-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9728fb3ce11729aa8c276825ddf504edeb00611d ]
When all bits of IER are set to 0, we still can observe the lpspi irq events
when using DMA mode to transfer data.
So disable irq to avoid the too much irq events.
Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Link: https://lore.kernel.org/r/20230505063557.3962220-1-xiaoning.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 89c0c62e947a01e7a36b54582fd9c9e346170255 ]
Currently, if the device is offline and all the channel paths are
either configured or varied offline, the associated subchannel gets
unregistered. Don't unregister the subchannel, instead unregister
offline device.
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 20a99a291d564a559cc2fd013b4824a3bb3f1db7 ]
Some devices have a wrong entry in their button array which points to
a GPIO which is required in another driver, so soc_button_array must
not claim it.
A specific example of this is the Lenovo Yoga Book X90F / X90L,
where the PNP0C40 home button entry points to a GPIO which is not
a home button and which is required by the lenovo-yogabook driver.
Add a DMI quirk table which can specify an ACPI GPIO resource index which
should be skipped; and add an entry for the Lenovo Yoga Book X90F / X90L
to this new DMI quirk table.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230414072116.4497-1-hdegoede@redhat.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c7275ce6a5fd32ca9f5a6294ed89cf0523181af9 ]
Upon keep alive completion, nvme_keep_alive_work is scheduled with the
same delay every time. If keep alive commands are completing slowly,
this may cause a keep alive timeout. The following trace illustrates the
issue, taking KATO = 8 and TBKAS off for simplicity:
1. t = 0: run nvme_keep_alive_work, send keep alive
2. t = ε: keep alive reaches controller, controller restarts its keep
alive timer
3. t = 4: host receives keep alive completion, schedules
nvme_keep_alive_work with delay 4
4. t = 8: run nvme_keep_alive_work, send keep alive
Here, a keep alive having RTT of 4 causes a delay of at least 8 - ε
between the controller receiving successive keep alives. With ε small,
the controller is likely to detect a keep alive timeout.
Fix this by calculating the RTT of the keep alive command, and adjusting
the scheduling delay of the next keep alive work accordingly.
Reported-by: Costa Sapuntzakis <costa@purestorage.com>
Reported-by: Randy Jennings <randyj@purestorage.com>
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 774a9636514764ddc0d072ae0d1d1c01a47e6ddd ]
When a command completes, we set a flag which will skip sending a
keep alive at the next run of nvme_keep_alive_work when TBKAS is on.
However, if the command was submitted long ago, it's possible that
the controller may have also restarted its keep alive timer (as a
result of receiving the command) long ago. The following trace
demonstrates the issue, assuming TBKAS is on and KATO = 8 for
simplicity:
1. t = 0: submit I/O commands A, B, C, D, E
2. t = 0.5: commands A, B, C, D, E reach controller, restart its keep
alive timer
3. t = 1: A completes
4. t = 2: run nvme_keep_alive_work, see recent completion, do nothing
5. t = 3: B completes
6. t = 4: run nvme_keep_alive_work, see recent completion, do nothing
7. t = 5: C completes
8. t = 6: run nvme_keep_alive_work, see recent completion, do nothing
9. t = 7: D completes
10. t = 8: run nvme_keep_alive_work, see recent completion, do nothing
11. t = 9: E completes
At this point, 8.5 seconds have passed without restarting the
controller's keep alive timer, so the controller will detect a keep
alive timeout.
Fix this by checking the IO start time when deciding to defer sending a
keep alive command. Only set comp_seen if the command started after the
most recent run of nvme_keep_alive_work. With this change, the
completions of B, C, and D will not set comp_seen and the run of
nvme_keep_alive_work at t = 4 will send a keep alive.
Reported-by: Costa Sapuntzakis <costa@purestorage.com>
Reported-by: Randy Jennings <randyj@purestorage.com>
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ea4d453b9ec9ea279c39744cd0ecb47ef48ede35 ]
With TBKAS on, the completion of one command can defer sending a
keep alive for up to twice the delay between successive runs of
nvme_keep_alive_work. The current delay of KATO / 2 thus makes it
possible for one command to defer sending a keep alive for up to
KATO, which can result in the controller detecting a KATO. The following
trace demonstrates the issue, taking KATO = 8 for simplicity:
1. t = 0: run nvme_keep_alive_work, no keep-alive sent
2. t = ε: I/O completion seen, set comp_seen = true
3. t = 4: run nvme_keep_alive_work, see comp_seen == true,
skip sending keep-alive, set comp_seen = false
4. t = 8: run nvme_keep_alive_work, see comp_seen == false,
send a keep-alive command.
Here, there is a delay of 8 - ε between receiving a command completion
and sending the next command. With ε small, the controller is likely to
detect a keep alive timeout.
Fix this by running nvme_keep_alive_work with a delay of KATO / 4
whenever TBKAS is on. Going through the above trace now gives us a
worst-case delay of 4 - ε, which is in line with the recommendation of
sending a command every KATO / 2 in the NVMe specification.
Reported-by: Costa Sapuntzakis <costa@purestorage.com>
Reported-by: Randy Jennings <randyj@purestorage.com>
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 016da9c65fec9f0e78c4909ed9a0f2d567af6775 ]
The "udc" pointer was never set in the probe() function so it will
lead to a NULL dereference in udc_pci_remove() when we do:
usb_del_gadget_udc(&udc->gadget);
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/ZG+A/dNpFWAlCChk@kili
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9b9e46aa07273ceb96866b2e812b46f1ee0b8d2f ]
This patch fixes the error checking in nfcsim.c.
The DebugFS kernel API is developed in
a way that the caller can safely ignore the errors that
occur during the creation of DebugFS nodes.
Signed-off-by: Osama Muhammad <osmtendev@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 73af6c7511038249cad3d5f3b44bf8d78ac0f499 ]
When a message was received the last_initiator is set to 0xff.
This will force the signal free time for the next transmit
to that for a new initiator. However, if a new transmit is
already in progress, then don't set last_initiator, since
that's the initiator of the current transmit. Overwriting
this would cause the signal free time of a following transmit
to be that of the new initiator instead of a next transmit.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit fe4526d99e2e06b08bb80316c3a596ea6a807b75 ]
Explicitly disable the CEC adapter in cec_devnode_unregister()
Usually this does not really do anything important, but for drivers
that use the CEC pin framework this is needed to properly stop the
hrtimer. Without this a crash would happen when such a driver is
unloaded with rmmod.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 16a9c24f24fbe4564284eb575b18cc20586b9270 ]
Added a variable check and
transition in case of an error
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Denis Arefev <arefev@swemel.ru>
Reviewed-by: Ping Cheng <ping.cheng@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2a737d3b8c792400118d6cf94958f559de9c5e59 ]
The tpg->np_login_sem is a semaphore that is used to serialize the login
process when multiple login threads run concurrently against the same
target portal group.
The iscsi_target_locate_portal() function finds the tpg, calls
iscsit_access_np() against the np_login_sem semaphore and saves the tpg
pointer in conn->tpg;
If iscsi_target_locate_portal() fails, the caller will check for the
conn->tpg pointer and, if it's not NULL, then it will assume that
iscsi_target_locate_portal() called iscsit_access_np() on the semaphore.
Make sure that conn->tpg gets initialized only if iscsit_access_np() was
successful, otherwise iscsit_deaccess_np() may end up being called against
a semaphore we never took, allowing more than one thread to access the same
tpg.
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Link: https://lore.kernel.org/r/20230508162219.1731964-4-mlombard@redhat.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ff7a1790fbf92f1bdd0966d3f0da3ea808ede876 ]
Up until commit 6a45b0e2589f ("gpiolib: Introduce
gpiochip_irqchip_add_domain()") all irq_domains were allocated
by gpiolib itself and thus gpiolib also takes care of freeing it.
With gpiochip_irqchip_add_domain() a user of gpiolib can associate an
irq_domain with the gpio_chip. This irq_domain is not managed by
gpiolib and therefore must not be freed by gpiolib.
Fixes: 6a45b0e2589f ("gpiolib: Introduce gpiochip_irqchip_add_domain()")
Reported-by: Jiawen Wu <jiawenwu@trustnetic.com>
Signed-off-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c1bcb976d8feb107ff2c12caaf12ac5e70f44d5f ]
Add the missing check for platform_get_irq() and return error code
if it fails.
The returned error code will be dealed with in
builtin_platform_driver(sifive_gpio_driver) and the driver will not
be registered.
Fixes: f52d6d8b43e5 ("gpio: sifive: To get gpio irq offset from device tree data")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8c00914e5438e3636f26b4f814b3297ae2a1b9ee ]
In case of gpio-regmap, IRQ chip is added by regmap-irq and associated with
GPIO chip by gpiochip_irqchip_add_domain(). The initialization flag was not
added in gpiochip_irqchip_add_domain(), causing gpiochip_to_irq() to return
-EPROBE_DEFER.
Fixes: 5467801f1fcb ("gpio: Restrict usage of GPIO chip irq members before initialization")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 146b6f6855e7656e8329910606595220c761daac ]
Power source notify handler is getting registered even when none of the
PMF feature in enabled leading to a crash.
...
[ 22.592162] Call Trace:
[ 22.592164] <TASK>
[ 22.592164] ? rcu_note_context_switch+0x5e0/0x660
[ 22.592166] ? __warn+0x81/0x130
[ 22.592171] ? rcu_note_context_switch+0x5e0/0x660
[ 22.592172] ? report_bug+0x171/0x1a0
[ 22.592175] ? prb_read_valid+0x1b/0x30
[ 22.592177] ? handle_bug+0x3c/0x80
[ 22.592178] ? exc_invalid_op+0x17/0x70
[ 22.592179] ? asm_exc_invalid_op+0x1a/0x20
[ 22.592182] ? rcu_note_context_switch+0x5e0/0x660
[ 22.592183] ? acpi_ut_delete_object_desc+0x86/0xb0
[ 22.592186] ? acpi_ut_update_ref_count.part.0+0x22d/0x930
[ 22.592187] __schedule+0xc0/0x1410
[ 22.592189] ? ktime_get+0x3c/0xa0
[ 22.592191] ? lapic_next_event+0x1d/0x30
[ 22.592193] ? hrtimer_start_range_ns+0x25b/0x350
[ 22.592196] schedule+0x5e/0xd0
[ 22.592197] schedule_hrtimeout_range_clock+0xbe/0x140
[ 22.592199] ? __pfx_hrtimer_wakeup+0x10/0x10
[ 22.592200] usleep_range_state+0x64/0x90
[ 22.592203] amd_pmf_send_cmd+0x106/0x2a0 [amd_pmf bddfe0fe3712aaa99acce3d5487405c5213c6616]
[ 22.592207] amd_pmf_update_slider+0x56/0x1b0 [amd_pmf bddfe0fe3712aaa99acce3d5487405c5213c6616]
[ 22.592210] amd_pmf_set_sps_power_limits+0x72/0x80 [amd_pmf bddfe0fe3712aaa99acce3d5487405c5213c6616]
[ 22.592213] amd_pmf_pwr_src_notify_call+0x49/0x90 [amd_pmf bddfe0fe3712aaa99acce3d5487405c5213c6616]
[ 22.592216] notifier_call_chain+0x5a/0xd0
[ 22.592218] atomic_notifier_call_chain+0x32/0x50
...
Fix this by moving the registration of source change notify handler only
when SPS(Static Slider) is advertised as supported.
Reported-by: Allen Zhong <allen@atr.me>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217571
Fixes: 4c71ae414474 ("platform/x86/amd/pmf: Add support SPS PMF feature")
Tested-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20230622060309.310001-1-Shyam-sundar.S-k@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a129b41fe0a8b4da828c46b10f5244ca07a3fec3 ]
This reverts commit da9ef50f545f86ffe6ff786174d26500c4db737a.
This fixes a regression in which the link would come up, but no
communication was possible.
The reverted commit was also removing a comment about
DP83867_PHYCR_FORCE_LINK_GOOD, this is not added back in this commits
since it seems that this is unrelated to the original code change.
Closes: https://lore.kernel.org/all/ZGuDJos8D7N0J6Z2@francesco-nb.int.toradex.com/
Fixes: da9ef50f545f ("net: phy: dp83867: perform soft reset and retain established link")
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Praneeth Bajjuri <praneeth@ti.com>
Link: https://lore.kernel.org/r/20230619154435.355485-1-francesco@dolcini.it
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7580e0a78eb29e7bb1a772eba4088250bbb70d41 ]
We have seen a bug where the NIC incorrectly changes the length in the
IP header of a padded packet to include the padding bytes. The driver
already has a workaround for this so do the workaround for this NIC too.
This resolves the issue.
The NIC in question identifies itself as follows:
[ 8.828494] be2net 0000:02:00.0: FW version is 10.7.110.31
[ 8.834759] be2net 0000:02:00.0: Emulex OneConnect(be3): PF FLEX10 port 1
02:00.0 Ethernet controller: Emulex Corporation OneConnect 10Gb NIC (be3) (rev 01)
Fixes: ca34fe38f06d ("be2net: fix wrong usage of adapter->generation")
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Link: https://lore.kernel.org/r/20230616164549.2863037-1-ross.lagerwall@citrix.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8332cf6fd7c7087dbc2067115b33979c9851bbc4 ]
LLDP frames are link-local frames, therefore they must be trapped to the
CPU port. Currently, the MT753X switches treat LLDP frames as regular
multicast frames, therefore flooding them to user ports. To fix this, set
LLDP frames to be trapped to the CPU port(s).
Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch")
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d7c66073559386b836bded7cdc8b66ee5c049129 ]
BPDUs are link-local frames, therefore they must be trapped to the CPU
port. Currently, the MT7530 switch treats BPDUs as regular multicast
frames, therefore flooding them to user ports. To fix this, set BPDUs to be
trapped to the CPU port. Group this on mt7530_setup() and
mt7531_setup_common() into mt753x_trap_frames() and call that.
Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch")
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4ae90f90e4909e3014e2dc6a0627964617a7b824 ]
All MT7530 switch IP variants share the MT7530_MFC register, but the
current driver only writes it for the switch variant that is integrated in
the MT7621 SoC. Modify the code to include all MT7530 derivatives.
Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch")
Suggested-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 413db499730248431c1005b392e8ed82c4fa19bf ]
The driver overrides the error codes returned by platform_get_irq_byname()
to -ENODEV, so if it returns -EPROBE_DEFER, the driver will fail the probe
permanently instead of the deferred probing. Switch to propagating error
codes upstream.
Fixes: 9ec36cafe43b ("of/irq: do irq resolution in platform_get_irq")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/20230617203622.6812-13-s.shtylyov@omp.ru
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5b067d7f855c61df7f8e2e8ccbcee133c282415e ]
The driver overrides the error codes returned by platform_get_irq() to
-ENXIO, so if it returns -EPROBE_DEFER, the driver will fail the probe
permanently instead of the deferred probing. Switch to propagating the
error codes upstream.
Fixes: 9ec36cafe43b ("of/irq: do irq resolution in platform_get_irq")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/20230617203622.6812-11-s.shtylyov@omp.ru
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b465dea5e1540c7d7b5211adaf94926980d3014b ]
The driver overrides the error codes returned by platform_get_irq() to
-EINVAL, so if it returns -EPROBE_DEFER, the driver will fail the probe
permanently instead of the deferred probing. Switch to propagating the
error codes upstream.
Fixes: 1b7ba57ecc86 ("mmc: sdhci-acpi: Handle return value of platform_get_irq")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20230617203622.6812-9-s.shtylyov@omp.ru
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3c482e1e830d79b9be8afb900a965135c01f7893 ]
The driver overrides the error codes returned by platform_get_irq() to
-EINVAL, so if it returns -EPROBE_DEFER, the driver will fail the probe
permanently instead of the deferred probing. Switch to propagating the
error codes upstream.
Fixes: ff65ffe46d28 ("mmc: Add Actions Semi Owl SoCs SD/MMC driver")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/20230617203622.6812-8-s.shtylyov@omp.ru
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit fb51b74a57859b707c3e8055ed0c25a7ca4f6a29 ]
The driver overrides the error codes returned by platform_get_irq() to
-ENXIO, so if it returns -EPROBE_DEFER, the driver will fail the probe
permanently instead of the deferred probing. Switch to propagating the
error codes upstream.
Fixes: 9ec36cafe43b ("of/irq: do irq resolution in platform_get_irq")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/20230617203622.6812-7-s.shtylyov@omp.ru
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit aedf4ba1ad00aaa94c1b66c73ecaae95e2564b95 ]
The driver overrides the error codes returned by platform_get_irq() to
-ENXIO, so if it returns -EPROBE_DEFER, the driver will fail the probe
permanently instead of the deferred probing. Switch to propagating the
error codes upstream.
Fixes: 9ec36cafe43b ("of/irq: do irq resolution in platform_get_irq")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/20230617203622.6812-6-s.shtylyov@omp.ru
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
