summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2014-02-27isdn: hisax/elsa: fix sleep_on race in elsa FSMArnd Bergmann2-4/+8
The state machine code in the elsa driver uses interruptible_sleep_on to wait for state changes, which is racy. A closer look at the possible states reveals that it is always used to wait for getting back into ARCOFI_NOP, so we can use wait_event_interruptible instead. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Karsten Keil <isdn@linux-pingi.de> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-27isdn: pcbit: fix interruptible_sleep_on raceArnd Bergmann1-3/+3
interruptible_sleep_on is racy and going away. In case of pcbit, the driver would run into a timeout if the card is initialized before we start waiting for it. This uses wait_event to fix the race. In order to do this, the state machine handling for the timeout case has to get trivially reorganized so we actually know whether the timeout has occorred or not. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Karsten Keil <isdn@linux-pingi.de> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-27atm: firestream: fix interruptible_sleep_on raceArnd Bergmann1-2/+2
interruptible_sleep_on is racy and going away. This replaces the one use in the firestream driver with the appropriate wait_event_interruptible variant. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Chas Williams <chas@cmf.nrl.navy.mil> Cc: linux-atm-general@lists.sourceforge.net Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-27igb: Update license text to remove FSF address and update copyright.Carolyn Wyborny21-64/+43
This patch updates the license text to remove address of Free Software Foundation and refer users to www.gnu.org instead. This patch also updates the copyright dates in appropriate igb driver files. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-27igb: make local functions static and remove dead codeJeff Kirsher8-98/+17
Based on Stephen Hemminger's original patch. Make local functions static, and remove unused functions. Reported-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-27ixgbe: Add WoL support for a new deviceMark Rustad2-0/+2
Add WoL support for port 0 of a new 82599-based device. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-27ixgbe: don't use magic size number to assign ptp_caps.nameJacob Keller1-2/+6
Rather than using a magic size number, just use sizeof since that will work and is more robust to future changes. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-27ixgbe: modify behavior on receiving a HW ECC error.Don Skidmore1-6/+12
Currently when we noticed a HW ECC error we would request the use reload the driver to force a reset of the part. This was done due to the mistaken believe that a normal reset would not be sufficient. Well it turns out it would be so now we just schedule a reset upon seeing the ECC. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-27ieee802154: fix new function declarationJean Sacren1-1/+1
The commit 8fad346f366a7 ("eee802154: add basic support for RF212 to at86rf230 driver") introduced the new function is_rf212() with some minor issues in declaration: 1) Fix the function type by changing it to bool as the function definition returns a boolean value. Additionally both callers of is_rf212() are expected to return a boolean value. 2) Fix the function specifier by deleting the inline keyword as the compiler takes care of that. Signed-off-by: Jean Sacren <sakiwit@gmail.com> Cc: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-27vxlan: remove unused port variable in vxlan_udp_encap_recv()Pablo Neira Ayuso1-3/+0
Signed-off-by: Pablo Neira Ayuso <pablo@gnumonks.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-27net/mlx4_en: Fix bad use of dev_idAmir Vadai1-1/+0
dev_id should be set for multiple netdev's sharing the same MAC, which is not the case here. Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-27net/mlx4_en: Expose port number through sysfsAmir Vadai1-0/+1
Initialize dev_port with port number (0 based) to be accessed through sysfs from user space. Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-27bnx2x: save RAM in kdump kernel by disabling TPAMichal Schmidt1-0/+2
When running in a kdump kernel, disable TPA. This saves memory, which tends to be scarce in kdump. TPA, being a receive acceleration, is unlikely to be useful for kdump, whose purpose is to send the memory image out. This saves additional 5 MB in the kdump environment. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-27bnx2x: save RAM in kdump kernel by using a single queueMichal Schmidt1-0/+5
When running in a kdump kernel, make sure to use only a single ethernet queue even if a num_queues option in /etc/modprobe.d/*.conf would specify otherwise. This saves memory, which tends to be scarce in kdump. This saves about 40 MB in the kdump environment on a setup with num_queues=8 in the config file. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-27bnx2x: clamp num_queues to prevent passing a negative valueMichal Schmidt1-4/+3
Use the clamp() macro to make the calculation of the number of queues slightly easier to understand. It also avoids a crash when someone accidentally passes a negative value in num_queues= module parameter. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-26bnx2x: Remove hidden flow control goto from BNX2X_ALLOC macrosJoe Perches4-89/+138
BNX2X_ALLOC macros use "goto alloc_mem_err" so these labels appear unused in some functions. Expand these macros in-place via coccinelle and some typing. Update the macros to use statement expressions and remove the BNX2X_ALLOC macro. This adds some > 80 char lines. $ cat bnx2x_pci_alloc.cocci @@ expression e1; expression e2; expression e3; @@ - BNX2X_PCI_ALLOC(e1, e2, e3); + e1 = BNX2X_PCI_ALLOC(e2, e3); if (!e1) goto alloc_mem_err; @@ expression e1; expression e2; expression e3; @@ - BNX2X_PCI_FALLOC(e1, e2, e3); + e1 = BNX2X_PCI_FALLOC(e2, e3); if (!e1) goto alloc_mem_err; @@ expression e1; expression e2; @@ - BNX2X_ALLOC(e1, e2); + e1 = kzalloc(e2, GFP_KERNEL); if (!e1) goto alloc_mem_err; @@ expression e1; expression e2; expression e3; @@ - kzalloc(sizeof(e1) * e2, e3) + kcalloc(e2, sizeof(e1), e3) @@ expression e1; expression e2; expression e3; @@ - kzalloc(e1 * sizeof(e2), e3) + kcalloc(e1, sizeof(e2), e3) Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-25net: bcmgenet: remove unused bh_lock memberFlorian Fainelli1-1/+0
bh_lock spinlock is unused, remove it from the private driver structure. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-25net: bcmgenet: remove commented code in bcmgenet_xmit()Florian Fainelli1-4/+0
This code is commented since it is unused, left-over from the very first time this driver was merged. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-25net: bcmgenet: drop checks on priv->phydevFlorian Fainelli1-11/+6
Drop all the checks on priv->phydev since we will refuse probing the driver if we cannot attach to a PHY device. Drop all checks on priv->phydev. This also fixes some smatch issues reported by Dan Carpenter. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-25gianfar: Fix Tx int miss, dont write IC on-the-flyClaudiu Manoil2-88/+77
Programming the interrupt coalescing (IC) registers while the controller/DMA is on may incur the loss of one Tx confirmation interrupt, under certain conditions. This is a subtle hw race because it does not occur during a burst of Tx packets. It has been observed on p2020 devices that, if just one packet is being xmit'ed, the Tx confirmation doesn't trigger and BQL evetually blocks the Tx queues, followed by Tx timeout and an un-responsive device. This issue was not apparent prior to introducing BQL support, as a late Tx confirmation was not an issue back then and the next burst of Tx frames would have triggered the Tx confirmation/ Tx ring cleanup anyway. Bottom line, the hw specifications state that the IC registers should not be programmed while the Rx/Tx blocks (the DMA) are enabled. Further more, these registers are currently re-written with the same values on the processing path, over and over again. To fix this, rewriting the IC registers has been removed from the processing path (napi poll). A complete MAC reset procedure has been implemented for the ethtool -c option instead, to reliably update these registers while the controller is stopped. Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-25gianfar: Fix device reset races (oops) for TxClaudiu Manoil3-84/+76
The device reset procedure, stop_gfar()/startup_gfar(), has concurrency issues. "Kernel access of bad area" oopses show up during Tx timeout device reset or other reset cases (like changing MTU) that happen while the interface still has traffic. The oopses happen in start_xmit and clean_tx_ring when accessing tx_queue-> tx_skbuff which is NULL. The race comes from de-allocating the tx_skbuff while transmission and napi processing are still active. Though the Tx queues get temoprarily stopped when Tx timeout occurs, they get re-enabled as a result of Tx congestion handling inside the napi context (see clean_tx_ring()). Not disabling the napi during reset is also a bug, because clean_tx_ring() will try to access tx_skbuff while it is being de-alloc'ed and re-alloc'ed. To fix this, stop_gfar() needs to disable napi processing after stopping the Tx queues. However, in order to prevent clean_tx_ring() to re-enable the Tx queue before the napi gets disabled, the device state DOWN has been introduced. It prevents the Tx congestion management from re-enabling the de-congested Tx queue while the device is brought down. An additional locking state, RESETTING, has been introduced to prevent simultaneous resets or to prevent configuring the device while it is resetting. The bogus 'rxlock's (for each Rx queue) have been removed since their purpose is not justified, as they don't prevent nor are suited to prevent device reset/reconfig races (such as this one). Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-25gianfar: Don't free/request irqs on device resetClaudiu Manoil1-32/+45
Resetting the device (stop_gfar()/startup_gfar()) should be fast and to the point, in order to timely recover from an error condition (like Tx timeout) or during device reconfig. The irq free/ request routines are just redundant here, and they should be part of the device close/ open routines instead. Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-25gianfar: Fix on-the-fly vlan and mtu updatesClaudiu Manoil3-127/+51
The RCTRL and TCTRL registers should not be changed on-the-fly, while the controller is running, otherwise unexpected behaviour occurs. But that's exactly what gfar_vlan_mode() does, updating the VLAN acceleration bits inside RCTRL/TCTRL. The attempt to lock these operations doesn't help, but only adds to the confusion. There's also a dependency for Rx FCB insertion (activating /de-activating the TOE offload block on Rx) which might change the required rx buffer size. This makes matters worse as gfar_vlan_mode() ends up calling gfar_change_mtu(), though the MTU size remains the same. Note that there are other situations that may affect the required rx buffer size, like changing RXCSUM or rx hw timestamping, but errorneously the rx buffer size is not recomputed/ updated in the process. To fix this, do the vlan updates properly inside the MAC reset and reconfiguration procedure, which takes care of the rx buffer size dependecy and the rx TOE block (PRSDEP) activation/deactivation as well (in the correct order). As a consequence, MTU/ rx buff size updates are done now by the same MAC reset and reconfig procedure, so that out of context updates to MAXFRM, MRBLR, and MACCFG inside change_mtu() are no longer needed. The rx buffer size dependecy to Rx FCB is now handled for the other cases too (RXCSUM and rx hw timestamping). Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-25gianfar: Implement MAC reset and reconfig procedureClaudiu Manoil1-82/+90
The main MAC config registers like: RCTRL/TCTRL, MRBLR, MAXFRM, RXIC/TXIC, most fields of MACCFG1/2, should not be changed on-the-fly, but at least after stopping the DMA and disabling the Rx/Tx blocks and, for increased reliability, after a MAC soft reset. Impelement a complete MAC soft reset and reconfig procedure following the latest HW advisories - gfar_mac_reset() - to replace gfar_mac_init() and (the confusing) init_registers() functions. Factor out separate config functions for RCTRL and TCTRL, insure programming order of the relevant config regs after MAC soft reset. Split gfar_hw_init() into gfar_mac_reset() and the remaining global regs that don't need to be reconfigured after MAC soft reset (FIFOCFG, ATTRELI, HW counters a.s.o). As gfar_hw_init() now makes all the register writes @probe() time, based on all the device flags and config options, it must be moved further down, just before register_netdev(), as the last config step when the config values are comitted to HW. Also, move netif_carrier_off() after register_netdev(), because it has no effect if called before. Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-25bcmgenet: Deleted unnecessary select_queue method.David S. Miller1-7/+0
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-25net: bcmgenet: Use devm_ioremap_resource()Fabio Estevam1-4/+3
According to Documentation/driver-model/devres.txt, devm_request_and_ioremap() is deprecated, so use devm_ioremap_resource() instead. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-25cgxb4: Stop using ethtool SPEED_* constantsBen Hutchings2-14/+14
ethtool speed values are just numbers of megabits and there is no need to add SPEED_40000. To be consistent, use integer constants directly for all speeds. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-25loopback: sctp: add NETIF_F_SCTP_CSUM to device featuresDaniel Borkmann1-0/+1
Drivers are allowed to set NETIF_F_SCTP_CSUM if they have hardware crc32c checksumming support for the SCTP protocol. Currently, NETIF_F_SCTP_CSUM flag is available in igb, ixgbe, i40e/i40evf drivers and for vlan devices. If we don't have NETIF_F_SCTP_CSUM then crc32c is done through CPU instructions, invoked from crypto layer, or if not available as slow-path fallback in software. Currently, loopback device propagates checksum offloading feature flags in dev->features, but is missing SCTP checksum offloading. Therefore, account for NETIF_F_SCTP_CSUM as well. Before patch: ./netperf_sctp -H 192.168.0.100 -t SCTP_STREAM_MANY SCTP 1-TO-MANY STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 192.168.0.100 () port 0 AF_INET Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 4194304 4194304 4096 10.00 4683.50 After patch: ./netperf_sctp -H 192.168.0.100 -t SCTP_STREAM_MANY SCTP 1-TO-MANY STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 192.168.0.100 () port 0 AF_INET Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 4194304 4194304 4096 10.00 15348.26 Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-25qlcnic: Update version to 5.3.56Shahed Shaikh1-2/+2
Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-25qlcnic: Enhance semaphore lock access failure error messageHarish Patil1-7/+15
Signed-off-by: Harish Patil <harish.patil@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-25qlcnic: Allow vlan0 trafficRajesh Borundia1-1/+5
o Adapter allows vlan0 traffic in case of SR-IOV after setting QLC_SRIOV_ALLOW_VLAN0 bit even though we do not add vlan0 filters. Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-25qlcnic: Enhance driver message in failed state.Sucheta Chakraborty1-2/+2
Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-25qlcnic: Updates to QLogic application/driver interface for virtual NIC ↵Jitendra Kalsaria1-65/+37
configuration Qlogic application interface in the driver which has larger than 8 vNIC configuration support has been updated to handle the following cases: o Only 8 or lower total vNICs were enabled within the vNIC 0-7 range o vNICs were enabled in the vNIC 0-15 range such that enabled vNICs were not contiguous and only 8 or lower number of total VNICs were enabled o Disconnect in the vNIC mapping between application and driver when the enabled VNICs were dis contiguous Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-25qlcnic: Re-factor firmware minidump template header handlingShahed Shaikh7-66/+287
Treat firmware minidump template headers for 82xx and 83xx/84xx adapters separately, as it may change for 82xx and 83xx/84xx adapter type independently. Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-25net/mlx4: Fix limiting number of IRQ's instead of RSS queuesIdo Shamay2-3/+5
This fix a performance bug introduced by commit 90b1ebe "mlx4: set maximal number of default RSS queues", which limits the numbers of IRQs opened by core module. The limit should be on the number of queues in the indirection table - rx_rings, and not on the number of IRQ's. Also, limiting on mlx4_core initialization instead of in mlx4_en, prevented using "ethtool -L" to utilize all the CPU's, when performance mode is prefered, since limiting this number to 8 reduces overall packet rate by 15%-50% in multiple TCP streams applications. For example, after running ethtool -L <ethx> rx 16 Packet rate Before the fix 897799 After the fix 1142070 Results were obtained using netperf: S=200 ; ( for i in $(seq 1 $S) ; do ( \ netperf -H 11.7.13.55 -t TCP_RR -l 30 &) ; \ wait ; done | grep "1 1" | awk '{SUM+=$6} END {print SUM}' ) CC: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ido Shamay <idos@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-25net/mlx4: Set number of RX rings in a utility functionIdo Shamay3-14/+25
mlx4_en_add() is too long. Moving set number of RX rings to a utiltity function to improve readability and modulization of the code. Signed-off-by: Ido Shamay <idos@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-25bonding: remove no longer needed lock for bond_xxx_info_query()dingtianhong1-4/+0
The bond_xxx_info_query() was already in RTNL, so no need to use bond lock to protect the bond slave list, so remove it. Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Veaceslav Falico <vfalico@redhat.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-25bonding: use rcu_dereference() to access curr_active_slavedingtianhong1-3/+1
The bond_info_show_master already in RCU read-side critical section, and the we access curr_active_slave without the curr_slave_lock, we could not sure whether the curr_active_slave will be changed during the processing, so use RCU to protected the pointer. Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Veaceslav Falico <vfalico@redhat.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-25bonding: netpoll: remove unwanted slave_dev_support_netpoll()dingtianhong1-8/+0
The __netpoll_setup() will check the slave's flag and ndo_poll_controller just like the slave_dev_support_netpoll() does, and slave_dev_support_netpoll() was not used by any place, so remove it. Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Veaceslav Falico <vfalico@redhat.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-21i40e and i40evf: Bump driver versionsCatherine Sullivan2-2/+2
Update the driver versions. Change-ID: I3fe23024d17da0e614ce126edb365bb2c428d482 Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-21i40e: Change MSIX to MSI-XCatherine Sullivan2-5/+7
Fix inconsistent use of MSIX and MSI-X in messages. Change-ID: Iae9ffb42819677c34544719044ed77632e06147d Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-21i40e: tighten up ring enable/disable flowMitch Williams1-17/+15
Change the do/while to a for loop, so we don't hit the delay each time, even when the register is ready for action. Don't bother to set or clear the QENA_STAT bit as it is read-only. Change-ID: Ie464718804dd79f6d726f291caa9b0c872b49978 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-21i40e: remove unnecessary delayMitch Williams1-1/+0
Ain't nothing gonna break my stride, nobody's gonna slow me down, oh no. I got to keep on moving. This was originally put in for debugging just-in-case purposes and never removed. Change-ID: Ic12c2e179c3923f54e6ba0a9e4ab05d25c3bab29 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-21i40evf: remove errant spaceMitch A Williams1-1/+1
Remove a bogus space. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-21i40evf: update version and copyright dateMitch Williams1-2/+2
A bunch of changes merit a new version number, and since these were made in the new year, update the copyright date. Change-ID: Ic3f282bf0c20679b9fb06860211afa7c78055bc2 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-21i40evf: store ring size in ring structsMitch Williams3-10/+8
Keep the descriptor ring size in the actual ring structs instead of in the adapter struct. This enables us to use common tx and rx code with the i40e PF driver. Also update copyrights. Change-ID: I2861e599b2b4c76441c062ea14400f4750f54d0e Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-21i40evf: don't guess device nameMitch Williams1-2/+0
We don't need to set an interface name here; the net core will do that, and then it will get renamed by udev anyway. Change-ID: I839a17837d19bedd1f490bff32ac5b85b4bfd97f Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-21i40evf: remove bogus commentMitch Williams1-1/+0
This comment is simply not true. Change-ID: If006b02b60984601a24257a951ae873dff568008 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-21i40evf: fix up strings in init taskMitch Williams1-20/+16
Make sure errors are reported at the correct log level, quit printing the function name every time, and make the messages more consistent in format. v2: Removed unnecessary periods and redundant OOM message. Change-ID: I50e443467519ad3850def131d84626c50612c611 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-21i40evf: get rid of pci_using_dacMitch Williams1-7/+3
PCI DAC doesn't really mean much on a virtualized PCI Express part, so get rid of that check and just always set the HIGHDMA flag in the net device. Change-ID: I2040272be0e7934323f470c2bc73fbdd4f93e2b6 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-17 04:46:32 +0300