| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
commit 1613462be621ad5103ec338a7b0ca0746ec4e5f1 upstream.
When running in an unprivileged domU under Xen, the privcmd driver
is restricted to allow only hypercalls against a target domain, for
which the current domU is acting as a device model.
Add a boot parameter "unrestricted" to allow all hypercalls (the
hypervisor will still refuse destructive hypercalls affecting other
guests).
Make this new parameter effective only in case the domU wasn't started
using secure boot, as otherwise hypercalls targeting the domU itself
might result in violating the secure boot functionality.
This is achieved by adding another lockdown reason, which can be
tested to not being set when applying the "unrestricted" option.
This is part of XSA-482
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 453b8fb68f3641fea970db88b7d9a153ed2a37e8 upstream.
The Xen privcmd driver allows to issue arbitrary hypercalls from
user space processes. This is normally no problem, as access is
usually limited to root and the hypervisor will deny any hypercalls
affecting other domains.
In case the guest is booted using secure boot, however, the privcmd
driver would be enabling a root user process to modify e.g. kernel
memory contents, thus breaking the secure boot feature.
The only known case where an unprivileged domU is really needing to
use the privcmd driver is the case when it is acting as the device
model for another guest. In this case all hypercalls issued via the
privcmd driver will target that other guest.
Fortunately the privcmd driver can already be locked down to allow
only hypercalls targeting a specific domain, but this mode can be
activated from user land only today.
The target domain can be obtained from Xenstore, so when not running
in dom0 restrict the privcmd driver to that target domain from the
beginning, resolving the potential problem of breaking secure boot.
This is XSA-482
Reported-by: Teddy Astie <teddy.astie@vates.tech>
Fixes: 1c5de1939c20 ("xen: add privcmd driver")
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0a2c5495b6d1ecb0fa18ef6631450f391a888256 upstream.
nvme_fc_delete_assocation() waits for pending I/O to complete before
returning, and an error can cause ->ioerr_work to be queued after
cancel_work_sync() had been called. Move the call to cancel_work_sync() to
be after nvme_fc_delete_association() to ensure ->ioerr_work is not running
when the nvme_fc_ctrl object is freed. Otherwise the following can occur:
[ 1135.911754] list_del corruption, ff2d24c8093f31f8->next is NULL
[ 1135.917705] ------------[ cut here ]------------
[ 1135.922336] kernel BUG at lib/list_debug.c:52!
[ 1135.926784] Oops: invalid opcode: 0000 [#1] SMP NOPTI
[ 1135.931851] CPU: 48 UID: 0 PID: 726 Comm: kworker/u449:23 Kdump: loaded Not tainted 6.12.0 #1 PREEMPT(voluntary)
[ 1135.943490] Hardware name: Dell Inc. PowerEdge R660/0HGTK9, BIOS 2.5.4 01/16/2025
[ 1135.950969] Workqueue: 0x0 (nvme-wq)
[ 1135.954673] RIP: 0010:__list_del_entry_valid_or_report.cold+0xf/0x6f
[ 1135.961041] Code: c7 c7 98 68 72 94 e8 26 45 fe ff 0f 0b 48 c7 c7 70 68 72 94 e8 18 45 fe ff 0f 0b 48 89 fe 48 c7 c7 80 69 72 94 e8 07 45 fe ff <0f> 0b 48 89 d1 48 c7 c7 a0 6a 72 94 48 89 c2 e8 f3 44 fe ff 0f 0b
[ 1135.979788] RSP: 0018:ff579b19482d3e50 EFLAGS: 00010046
[ 1135.985015] RAX: 0000000000000033 RBX: ff2d24c8093f31f0 RCX: 0000000000000000
[ 1135.992148] RDX: 0000000000000000 RSI: ff2d24d6bfa1d0c0 RDI: ff2d24d6bfa1d0c0
[ 1135.999278] RBP: ff2d24c8093f31f8 R08: 0000000000000000 R09: ffffffff951e2b08
[ 1136.006413] R10: ffffffff95122ac8 R11: 0000000000000003 R12: ff2d24c78697c100
[ 1136.013546] R13: fffffffffffffff8 R14: 0000000000000000 R15: ff2d24c78697c0c0
[ 1136.020677] FS: 0000000000000000(0000) GS:ff2d24d6bfa00000(0000) knlGS:0000000000000000
[ 1136.028765] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1136.034510] CR2: 00007fd207f90b80 CR3: 000000163ea22003 CR4: 0000000000f73ef0
[ 1136.041641] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1136.048776] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400
[ 1136.055910] PKRU: 55555554
[ 1136.058623] Call Trace:
[ 1136.061074] <TASK>
[ 1136.063179] ? show_trace_log_lvl+0x1b0/0x2f0
[ 1136.067540] ? show_trace_log_lvl+0x1b0/0x2f0
[ 1136.071898] ? move_linked_works+0x4a/0xa0
[ 1136.075998] ? __list_del_entry_valid_or_report.cold+0xf/0x6f
[ 1136.081744] ? __die_body.cold+0x8/0x12
[ 1136.085584] ? die+0x2e/0x50
[ 1136.088469] ? do_trap+0xca/0x110
[ 1136.091789] ? do_error_trap+0x65/0x80
[ 1136.095543] ? __list_del_entry_valid_or_report.cold+0xf/0x6f
[ 1136.101289] ? exc_invalid_op+0x50/0x70
[ 1136.105127] ? __list_del_entry_valid_or_report.cold+0xf/0x6f
[ 1136.110874] ? asm_exc_invalid_op+0x1a/0x20
[ 1136.115059] ? __list_del_entry_valid_or_report.cold+0xf/0x6f
[ 1136.120806] move_linked_works+0x4a/0xa0
[ 1136.124733] worker_thread+0x216/0x3a0
[ 1136.128485] ? __pfx_worker_thread+0x10/0x10
[ 1136.132758] kthread+0xfa/0x240
[ 1136.135904] ? __pfx_kthread+0x10/0x10
[ 1136.139657] ret_from_fork+0x31/0x50
[ 1136.143236] ? __pfx_kthread+0x10/0x10
[ 1136.146988] ret_from_fork_asm+0x1a/0x30
[ 1136.150915] </TASK>
Fixes: 19fce0470f05 ("nvme-fc: avoid calling _nvme_fc_abort_outstanding_ios from interrupt context")
Cc: stable@vger.kernel.org
Tested-by: Marco Patalano <mpatalan@redhat.com>
Reviewed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jaskaran Singh <jsingh@cloudlinux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
nvme_fc_delete_ctrl()"
This reverts commit 3d81beae4753db3b3dc5b70dc300d4036e0d9cb8.
The backport of upstream commit 0a2c5495b6d1 was incorrectly applied.
The cancel_work_sync() call for ->ioerr_work was added to
nvme_fc_reset_ctrl_work() instead of nvme_fc_delete_ctrl().
Signed-off-by: Jaskaran Singh <jsingh@cloudlinux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit aa79f996eb41e95aed85a1bd7f56bcd6a3842008 ]
The cp2615 driver uses the USB device serial string as the i2c adapter
name but does not make sure that the string exists.
Verify that the device has a serial number before accessing it to avoid
triggering a NULL-pointer dereference (e.g. with malicious devices).
Fixes: 4a7695429ead ("i2c: cp2615: add i2c driver for Silicon Labs' CP2615 Digital Audio Bridge")
Cc: stable@vger.kernel.org # 5.13
Cc: Bence Csókás <bence98@sch.bme.hu>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Bence Csókás <bence98@sch.bme.hu>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260309075016.25612-1-johan@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit e2def33f9ee1b1a8cda4ec5cde69840b5708f068 ]
`strncpy` is deprecated for use on NUL-terminated destination strings [1].
We should prefer more robust and less ambiguous string interfaces.
We expect name to be NUL-terminated based on its numerous uses with
functions that expect NUL-terminated strings.
For example in i2c-core-base.c +1533:
| dev_dbg(&adap->dev, "adapter [%s] registered\n", adap->name);
NUL-padding is not required as `adap` is already zero-alloacted with:
| adap = devm_kzalloc(&usbif->dev, sizeof(struct i2c_adapter), GFP_KERNEL);
With the above in mind, a suitable replacement is `strscpy` [2] due to
the fact that it guarantees NUL-termination on the destination buffer
without unnecessarily NUL-padding.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Stable-dep-of: aa79f996eb41 ("i2c: cp2615: fix serial string NULL-deref at probe")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 9cb83d4be0b9b697eae93d321e0da999f9cdfcfc ]
The brcmf_btcoex_detach() only shuts down the btcoex timer, if the
flag timer_on is false. However, the brcmf_btcoex_timerfunc(), which
runs as timer handler, sets timer_on to false. This creates critical
race conditions:
1.If brcmf_btcoex_detach() is called while brcmf_btcoex_timerfunc()
is executing, it may observe timer_on as false and skip the call to
timer_shutdown_sync().
2.The brcmf_btcoex_timerfunc() may then reschedule the brcmf_btcoex_info
worker after the cancel_work_sync() has been executed, resulting in
use-after-free bugs.
The use-after-free bugs occur in two distinct scenarios, depending on
the timing of when the brcmf_btcoex_info struct is freed relative to
the execution of its worker thread.
Scenario 1: Freed before the worker is scheduled
The brcmf_btcoex_info is deallocated before the worker is scheduled.
A race condition can occur when schedule_work(&bt_local->work) is
called after the target memory has been freed. The sequence of events
is detailed below:
CPU0 | CPU1
brcmf_btcoex_detach | brcmf_btcoex_timerfunc
| bt_local->timer_on = false;
if (cfg->btcoex->timer_on) |
... |
cancel_work_sync(); |
... |
kfree(cfg->btcoex); // FREE |
| schedule_work(&bt_local->work); // USE
Scenario 2: Freed after the worker is scheduled
The brcmf_btcoex_info is freed after the worker has been scheduled
but before or during its execution. In this case, statements within
the brcmf_btcoex_handler() — such as the container_of macro and
subsequent dereferences of the brcmf_btcoex_info object will cause
a use-after-free access. The following timeline illustrates this
scenario:
CPU0 | CPU1
brcmf_btcoex_detach | brcmf_btcoex_timerfunc
| bt_local->timer_on = false;
if (cfg->btcoex->timer_on) |
... |
cancel_work_sync(); |
... | schedule_work(); // Reschedule
|
kfree(cfg->btcoex); // FREE | brcmf_btcoex_handler() // Worker
/* | btci = container_of(....); // USE
The kfree() above could | ...
also occur at any point | btci-> // USE
during the worker's execution|
*/ |
To resolve the race conditions, drop the conditional check and call
timer_shutdown_sync() directly. It can deactivate the timer reliably,
regardless of its current state. Once stopped, the timer_on state is
then set to false.
Fixes: 61730d4dfffc ("brcmfmac: support critical protocol API for DHCP")
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Link: https://patch.msgid.link/20250822050839.4413-1-duoming@zju.edu.cn
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
[ Keep del_timer_sync() instead of timer_shutdown_sync() here. ]
Signed-off-by: Robert Garcia <rob_garcia@163.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 4c49f38e20a57f8abaebdf95b369295b153d1f8e ]
Commit 66600fac7a98 ("net: stmmac: TSO: Fix unbalanced DMA map/unmap
for non-paged SKB data") moved the assignment of tx_skbuff_dma[]'s
members to be later in stmmac_tso_xmit().
The buf (dma cookie) and len stored in this structure are passed to
dma_unmap_single() by stmmac_tx_clean(). The DMA API requires that
the dma cookie passed to dma_unmap_single() is the same as the value
returned from dma_map_single(). However, by moving the assignment
later, this is not the case when priv->dma_cap.addr64 > 32 as "des"
is offset by proto_hdr_len.
This causes problems such as:
dwc-eth-dwmac 2490000.ethernet eth0: Tx DMA map failed
and with DMA_API_DEBUG enabled:
DMA-API: dwc-eth-dwmac 2490000.ethernet: device driver tries to +free DMA memory it has not allocated [device address=0x000000ffffcf65c0] [size=66 bytes]
Fix this by maintaining "des" as the original DMA cookie, and use
tso_des to pass the offset DMA cookie to stmmac_tso_allocator().
Full details of the crashes can be found at:
https://lore.kernel.org/all/d8112193-0386-4e14-b516-37c2d838171a@nvidia.com/
https://lore.kernel.org/all/klkzp5yn5kq5efgtrow6wbvnc46bcqfxs65nz3qy77ujr5turc@bwwhelz2l4dw/
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Reported-by: Thierry Reding <thierry.reding@gmail.com>
Fixes: 66600fac7a98 ("net: stmmac: TSO: Fix unbalanced DMA map/unmap for non-paged SKB data")
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Furong Xu <0x1207@gmail.com>
Link: https://patch.msgid.link/E1tJXcx-006N4Z-PC@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ The context change is due to the commit 041cc86b3653
("net: stmmac: Enable TSO on VLANs") in v6.11 which is irrelevant to
the logic of this patch. ]
Signed-off-by: Rahul Sharma <black.hawk@163.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 03b3bcd319b3ab5182bc9aaa0421351572c78ac0 ]
The namespaces can access the controller's admin request_queue, and
stale references on the namespaces may exist after tearing down the
controller. Ensure the admin request_queue is active by moving the
controller's 'put' to after all controller references have been released
to ensure no one is can access the request_queue. This fixes a reported
use-after-free bug:
BUG: KASAN: slab-use-after-free in blk_queue_enter+0x41c/0x4a0
Read of size 8 at addr ffff88c0a53819f8 by task nvme/3287
CPU: 67 UID: 0 PID: 3287 Comm: nvme Tainted: G E 6.13.2-ga1582f1a031e #15
Tainted: [E]=UNSIGNED_MODULE
Hardware name: Jabil /EGS 2S MB1, BIOS 1.00 06/18/2025
Call Trace:
<TASK>
dump_stack_lvl+0x4f/0x60
print_report+0xc4/0x620
? _raw_spin_lock_irqsave+0x70/0xb0
? _raw_read_unlock_irqrestore+0x30/0x30
? blk_queue_enter+0x41c/0x4a0
kasan_report+0xab/0xe0
? blk_queue_enter+0x41c/0x4a0
blk_queue_enter+0x41c/0x4a0
? __irq_work_queue_local+0x75/0x1d0
? blk_queue_start_drain+0x70/0x70
? irq_work_queue+0x18/0x20
? vprintk_emit.part.0+0x1cc/0x350
? wake_up_klogd_work_func+0x60/0x60
blk_mq_alloc_request+0x2b7/0x6b0
? __blk_mq_alloc_requests+0x1060/0x1060
? __switch_to+0x5b7/0x1060
nvme_submit_user_cmd+0xa9/0x330
nvme_user_cmd.isra.0+0x240/0x3f0
? force_sigsegv+0xe0/0xe0
? nvme_user_cmd64+0x400/0x400
? vfs_fileattr_set+0x9b0/0x9b0
? cgroup_update_frozen_flag+0x24/0x1c0
? cgroup_leave_frozen+0x204/0x330
? nvme_ioctl+0x7c/0x2c0
blkdev_ioctl+0x1a8/0x4d0
? blkdev_common_ioctl+0x1930/0x1930
? fdget+0x54/0x380
__x64_sys_ioctl+0x129/0x190
do_syscall_64+0x5b/0x160
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x7f765f703b0b
Code: ff ff ff 85 c0 79 9b 49 c7 c4 ff ff ff ff 5b 5d 4c 89 e0 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d dd 52 0f 00 f7 d8 64 89 01 48
RSP: 002b:00007ffe2cefe808 EFLAGS: 00000202 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007ffe2cefe860 RCX: 00007f765f703b0b
RDX: 00007ffe2cefe860 RSI: 00000000c0484e41 RDI: 0000000000000003
RBP: 0000000000000000 R08: 0000000000000003 R09: 0000000000000000
R10: 00007f765f611d50 R11: 0000000000000202 R12: 0000000000000003
R13: 00000000c0484e41 R14: 0000000000000001 R15: 00007ffe2cefea60
</TASK>
Reported-by: Casey Chen <cachen@purestorage.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
[ The context change is due to the commit 2b3f056f72e5
("blk-mq: move the call to blk_put_queue out of blk_mq_destroy_queue")
in v6.2 which is irrelevant to the logic of this patch. ]
Signed-off-by: Rahul Sharma <black.hawk@163.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 9d73b107a61b73e7101d4b728ddac3d2c77db111 ]
This commit is necessary for DC to function well with chips
that use the legacy power management code, ie. SI and KV.
Communicate display information from DC to the legacy PM code.
Currently DC uses pm_display_cfg to communicate power management
requirements from the display code to the DPM code.
However, the legacy (non-DC) code path used different fields
and therefore could not take into account anything from DC.
Change the legacy display code to fill the same pm_display_cfg
struct as DC and use the same in the legacy DPM code.
To ease review and reduce churn, this commit does not yet
delete the now unneeded code, that is done in the next commit.
v2:
Rebase.
Fix single_display in amdgpu_dpm_pick_power_state.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit b515dcb0dc4e85d8254f5459cfb32fce88dacbfb ]
This commit adds the pixel_clock field to the display config
struct so that power management (DPM) can use it.
We currently don't have a proper bandwidth calculation on old
GPUs with DCE 6-10 because dce_calcs only supports DCE 11+.
So the power management (DPM) on these GPUs may need to make
ad-hoc decisions for display based on the pixel clock.
Also rename sym_clock to pixel_clock in dm_pp_single_disp_config
to avoid confusion with other code where the sym_clock refers to
the DisplayPort symbol clock.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit d09ef243035b75a6d403ebfeb7e87fa20d7e25c6 ]
There are several places where we don't want to check
if a particular asic could support DC, but rather, if
DC is enabled. Set a flag if DC is enabled and check
for that rather than if a device supports DC or not.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 96ce96f8773da4814622fd97e5226915a2c30706 ]
amdgpu_device_asic_has_dc_support() just checks the asic itself.
amdgpu_device_has_dc_support() is a runtime check which not
only checks the asic, but also other things in the driver
like whether virtual display is enabled. We want the latter
here.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a143545855bc2c6e1330f6f57ae375ac44af00a7 upstream.
Add proper locking in mmp_pdma_residue() to prevent use-after-free when
accessing descriptor list and descriptor contents.
The race occurs when multiple threads call tx_status() while the tasklet
on another CPU is freeing completed descriptors:
CPU 0 CPU 1
----- -----
mmp_pdma_tx_status()
mmp_pdma_residue()
-> NO LOCK held
list_for_each_entry(sw, ..)
DMA interrupt
dma_do_tasklet()
-> spin_lock(&desc_lock)
list_move(sw->node, ...)
spin_unlock(&desc_lock)
| dma_pool_free(sw) <- FREED!
-> access sw->desc <- UAF!
This issue can be reproduced when running dmatest on the same channel with
multiple threads (threads_per_chan > 1).
Fix by protecting the chain_running list iteration and descriptor access
with the chan->desc_lock spinlock.
Signed-off-by: Juan Li <lijuan@linux.spacemit.com>
Signed-off-by: Guodong Xu <guodong@riscstar.com>
Link: https://patch.msgid.link/20251216-mmp-pdma-race-v1-1-976a224bb622@riscstar.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
[ Minor context conflict resolved. ]
Signed-off-by: Wenshan Lan <jetlan9@163.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 0162ab3220bac870e43e229e6e3024d1a21c3f26 ]
When the i915 driver firmware binaries are not present, the
set_default_submission pointer is not set. This pointer is
dereferenced during suspend anyways.
Add a check to make sure it is set before dereferencing.
[ 23.289926] PM: suspend entry (deep)
[ 23.293558] Filesystems sync: 0.000 seconds
[ 23.298010] Freezing user space processes
[ 23.302771] Freezing user space processes completed (elapsed 0.000 seconds)
[ 23.309766] OOM killer disabled.
[ 23.313027] Freezing remaining freezable tasks
[ 23.318540] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[ 23.342038] serial 00:05: disabled
[ 23.345719] serial 00:02: disabled
[ 23.349342] serial 00:01: disabled
[ 23.353782] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 23.358993] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[ 23.361635] ata1.00: Entering standby power mode
[ 23.368863] ata2.00: Entering standby power mode
[ 23.445187] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ 23.452194] #PF: supervisor instruction fetch in kernel mode
[ 23.457896] #PF: error_code(0x0010) - not-present page
[ 23.463065] PGD 0 P4D 0
[ 23.465640] Oops: Oops: 0010 [#1] SMP NOPTI
[ 23.469869] CPU: 8 UID: 0 PID: 211 Comm: kworker/u48:18 Tainted: G S W 6.19.0-rc4-00020-gf0b9d8eb98df #10 PREEMPT(voluntary)
[ 23.482512] Tainted: [S]=CPU_OUT_OF_SPEC, [W]=WARN
[ 23.496511] Workqueue: async async_run_entry_fn
[ 23.501087] RIP: 0010:0x0
[ 23.503755] Code: Unable to access opcode bytes at 0xffffffffffffffd6.
[ 23.510324] RSP: 0018:ffffb4a60065fca8 EFLAGS: 00010246
[ 23.515592] RAX: 0000000000000000 RBX: ffff9f428290e000 RCX: 000000000000000f
[ 23.522765] RDX: 0000000000000000 RSI: 0000000000000282 RDI: ffff9f428290e000
[ 23.529937] RBP: ffff9f4282907070 R08: ffff9f4281130428 R09: 00000000ffffffff
[ 23.537111] R10: 0000000000000000 R11: 0000000000000001 R12: ffff9f42829070f8
[ 23.544284] R13: ffff9f4282906028 R14: ffff9f4282900000 R15: ffff9f4282906b68
[ 23.551457] FS: 0000000000000000(0000) GS:ffff9f466b2cf000(0000) knlGS:0000000000000000
[ 23.559588] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 23.565365] CR2: ffffffffffffffd6 CR3: 000000031c230001 CR4: 0000000000f70ef0
[ 23.572539] PKRU: 55555554
[ 23.575281] Call Trace:
[ 23.577770] <TASK>
[ 23.579905] intel_engines_reset_default_submission+0x42/0x60
[ 23.585695] __intel_gt_unset_wedged+0x191/0x200
[ 23.590360] intel_gt_unset_wedged+0x20/0x40
[ 23.594675] gt_sanitize+0x15e/0x170
[ 23.598290] i915_gem_suspend_late+0x6b/0x180
[ 23.602692] i915_drm_suspend_late+0x35/0xf0
[ 23.607008] ? __pfx_pci_pm_suspend_late+0x10/0x10
[ 23.611843] dpm_run_callback+0x78/0x1c0
[ 23.615817] device_suspend_late+0xde/0x2e0
[ 23.620037] async_suspend_late+0x18/0x30
[ 23.624082] async_run_entry_fn+0x25/0xa0
[ 23.628129] process_one_work+0x15b/0x380
[ 23.632182] worker_thread+0x2a5/0x3c0
[ 23.635973] ? __pfx_worker_thread+0x10/0x10
[ 23.640279] kthread+0xf6/0x1f0
[ 23.643464] ? __pfx_kthread+0x10/0x10
[ 23.647263] ? __pfx_kthread+0x10/0x10
[ 23.651045] ret_from_fork+0x131/0x190
[ 23.654837] ? __pfx_kthread+0x10/0x10
[ 23.658634] ret_from_fork_asm+0x1a/0x30
[ 23.662597] </TASK>
[ 23.664826] Modules linked in:
[ 23.667914] CR2: 0000000000000000
[ 23.671271] ------------[ cut here ]------------
Signed-off-by: Rahul Bukte <rahul.bukte@sony.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260203044839.1555147-1-suraj.kandpal@intel.com
(cherry picked from commit daa199abc3d3d1740c9e3a2c3e9216ae5b447cad)
Fixes: ff44ad51ebf8 ("drm/i915: Move engine->submit_request selection to a vfunc")
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit da9ba4dcc01e7cf52b7676f0ee9607b8358c2171 ]
When oops_panic_write is set, the driver disables interrupts and
switches to PIO polling mode but still falls through into the DMA
path. DMA cannot be used reliably in panic context, so make the
DMA path an else branch to ensure only PIO is used during panic
writes.
Fixes: c1ac2dc34b51 ("mtd: rawnand: brcmnand: When oops in progress use pio and interrupt polling")
Signed-off-by: Kamal Dasu <kamal.dasu@broadcom.com>
Reviewed-by: William Zhang <william.zhang@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit bab2bc6e850a697a23b9e5f0e21bb8c187615e95 ]
nand_lock() and nand_unlock() call into chip->ops.lock_area/unlock_area
without holding the NAND device lock. On controllers that implement
SET_FEATURES via multiple low-level PIO commands, these can race with
concurrent UBI/UBIFS background erase/write operations that hold the
device lock, resulting in cmd_pending conflicts on the NAND controller.
Add nand_get_device()/nand_release_device() around the lock/unlock
operations to serialize them against all other NAND controller access.
Fixes: 92270086b7e5 ("mtd: rawnand: Add support for manufacturer specific lock/unlock operation")
Signed-off-by: Kamal Dasu <kamal.dasu@broadcom.com>
Reviewed-by: William Zhang <william.zhang@broadcom.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit be627abcc0d5dbd5882873bd85fbc18aa3d189ed upstream.
In the commit in Fixes:, when the code has been updated to use an explicit
for loop, instead of for_each_available_child_of_node(), the assumption
that a reference to a device_node structure would be released at each
iteration has been broken.
Now, an explicit of_node_put() is needed to release the reference.
Fixes: 095561f476ab ("i2c: fsi: Create busses for all ports")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: <stable@vger.kernel.org> # v5.3+
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/fd805c39f8de51edf303856103d782138a1633c8.1772382022.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit cd644b805da8a253198718741bf363c4c58862ff upstream.
The Fintek F81532A/534A/535/536 family relies on the
F81534A_CTRL_CMD_ENABLE_PORT (116h) register during initialization to
both determine serial port status and control port creation. If the
driver experiences fast load/unload cycles, the device state may becomes
unstable, resulting in the incomplete generation of serial ports.
Performing a dummy read operation on the register prior to the initial
write command resolves the issue. This clears the device's stale internal
state. Subsequent write operations will correctly generate all serial
ports.
This patch also removes the retry loop in f81534a_ctrl_set_register()
because the stale state has been fixed.
Tested on: HygonDM1SLT(Hygon C86 3250 8-core Processor)
Signed-off-by: Ji-Ze Hong (Peter Hong) <peter_hong@fintek.com.tw>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit fcd7f96c783626c07ee3ed75fa3739a8a2052310 ]
Although it is guided that `#mbox-cells` must be at least 1, there are
many instances of `#mbox-cells = <0>;` in the device tree. If that is
the case and the corresponding mailbox controller does not provide
`fw_xlate` and of_xlate` function pointers, `of_mbox_index_xlate()` will
be used by default and out-of-bounds accesses could occur due to lack of
bounds check in that function.
Cc: stable@vger.kernel.org
Signed-off-by: Joonwon Kang <joonwonkang@google.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
[ changed sp->nargs to sp->args_count in the code and
fw_mbox_index_xlate() to of_mbox_index_xlate() in the commit message. ]
Signed-off-by: Joonwon Kang <joonwonkang@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
drm_dev_unplug
[ Upstream commit 6bee098b91417654703e17eb5c1822c6dfd0c01d ]
When trying to do a rather aggressive test of igt's "xe_module_load
--r reload" with a full desktop environment and game running I noticed
a few OOPSes when dereferencing freed pointers, related to
framebuffers and property blobs after the compositor exits.
Solve this by guarding the freeing in drm_file with drm_dev_enter/exit,
and immediately put the references from struct drm_file objects during
drm_dev_unplug().
Related warnings for framebuffers on the subtest:
[ 739.713076] ------------[ cut here ]------------
WARN_ON(!list_empty(&dev->mode_config.fb_list))
[ 739.713079] WARNING: drivers/gpu/drm/drm_mode_config.c:584 at drm_mode_config_cleanup+0x30b/0x320 [drm], CPU#12: xe_module_load/13145
....
[ 739.713328] Call Trace:
[ 739.713330] <TASK>
[ 739.713335] ? intel_pmdemand_destroy_state+0x11/0x20 [xe]
[ 739.713574] ? intel_atomic_global_obj_cleanup+0xe4/0x1a0 [xe]
[ 739.713794] intel_display_driver_remove_noirq+0x51/0xb0 [xe]
[ 739.714041] xe_display_fini_early+0x33/0x50 [xe]
[ 739.714284] devm_action_release+0xf/0x20
[ 739.714294] devres_release_all+0xad/0xf0
[ 739.714301] device_unbind_cleanup+0x12/0xa0
[ 739.714305] device_release_driver_internal+0x1b7/0x210
[ 739.714311] device_driver_detach+0x14/0x20
[ 739.714315] unbind_store+0xa6/0xb0
[ 739.714319] drv_attr_store+0x21/0x30
[ 739.714322] sysfs_kf_write+0x48/0x60
[ 739.714328] kernfs_fop_write_iter+0x16b/0x240
[ 739.714333] vfs_write+0x266/0x520
[ 739.714341] ksys_write+0x72/0xe0
[ 739.714345] __x64_sys_write+0x19/0x20
[ 739.714347] x64_sys_call+0xa15/0xa30
[ 739.714355] do_syscall_64+0xd8/0xab0
[ 739.714361] entry_SYSCALL_64_after_hwframe+0x4b/0x53
and
[ 739.714459] ------------[ cut here ]------------
[ 739.714461] xe 0000:67:00.0: [drm] drm_WARN_ON(!list_empty(&fb->filp_head))
[ 739.714464] WARNING: drivers/gpu/drm/drm_framebuffer.c:833 at drm_framebuffer_free+0x6c/0x90 [drm], CPU#12: xe_module_load/13145
[ 739.714715] RIP: 0010:drm_framebuffer_free+0x7a/0x90 [drm]
...
[ 739.714869] Call Trace:
[ 739.714871] <TASK>
[ 739.714876] drm_mode_config_cleanup+0x26a/0x320 [drm]
[ 739.714998] ? __drm_printfn_seq_file+0x20/0x20 [drm]
[ 739.715115] ? drm_mode_config_cleanup+0x207/0x320 [drm]
[ 739.715235] intel_display_driver_remove_noirq+0x51/0xb0 [xe]
[ 739.715576] xe_display_fini_early+0x33/0x50 [xe]
[ 739.715821] devm_action_release+0xf/0x20
[ 739.715828] devres_release_all+0xad/0xf0
[ 739.715843] device_unbind_cleanup+0x12/0xa0
[ 739.715850] device_release_driver_internal+0x1b7/0x210
[ 739.715856] device_driver_detach+0x14/0x20
[ 739.715860] unbind_store+0xa6/0xb0
[ 739.715865] drv_attr_store+0x21/0x30
[ 739.715868] sysfs_kf_write+0x48/0x60
[ 739.715873] kernfs_fop_write_iter+0x16b/0x240
[ 739.715878] vfs_write+0x266/0x520
[ 739.715886] ksys_write+0x72/0xe0
[ 739.715890] __x64_sys_write+0x19/0x20
[ 739.715893] x64_sys_call+0xa15/0xa30
[ 739.715900] do_syscall_64+0xd8/0xab0
[ 739.715905] entry_SYSCALL_64_after_hwframe+0x4b/0x53
and then finally file close blows up:
[ 743.186530] Oops: general protection fault, probably for non-canonical address 0xdead000000000122: 0000 [#1] SMP
[ 743.186535] CPU: 3 UID: 1000 PID: 3453 Comm: kwin_wayland Tainted: G W 7.0.0-rc1-valkyria+ #110 PREEMPT_{RT,(lazy)}
[ 743.186537] Tainted: [W]=WARN
[ 743.186538] Hardware name: Gigabyte Technology Co., Ltd. X299 AORUS Gaming 3/X299 AORUS Gaming 3-CF, BIOS F8n 12/06/2021
[ 743.186539] RIP: 0010:drm_framebuffer_cleanup+0x55/0xc0 [drm]
[ 743.186588] Code: d8 72 73 0f b6 42 05 ff c3 39 c3 72 e8 49 8d bd 50 07 00 00 31 f6 e8 3a 80 d3 e1 49 8b 44 24 10 49 8d 7c 24 08 49 8b 54 24 08 <48> 3b 38 0f 85 95 7f 02 00 48 3b 7a 08 0f 85 8b 7f 02 00 48 89 42
[ 743.186589] RSP: 0018:ffffc900085e3cf8 EFLAGS: 00010202
[ 743.186591] RAX: dead000000000122 RBX: 0000000000000001 RCX: ffffffff8217ed03
[ 743.186592] RDX: dead000000000100 RSI: 0000000000000000 RDI: ffff88814675ba08
[ 743.186593] RBP: ffffc900085e3d10 R08: 0000000000000000 R09: 0000000000000000
[ 743.186593] R10: 0000000000000000 R11: 0000000000000000 R12: ffff88814675ba00
[ 743.186594] R13: ffff88810d778000 R14: ffff888119f6dca0 R15: ffff88810c660bb0
[ 743.186595] FS: 00007ff377d21280(0000) GS:ffff888cec3f8000(0000) knlGS:0000000000000000
[ 743.186596] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 743.186596] CR2: 000055690b55e000 CR3: 0000000113586003 CR4: 00000000003706f0
[ 743.186597] Call Trace:
[ 743.186598] <TASK>
[ 743.186603] intel_user_framebuffer_destroy+0x12/0x90 [xe]
[ 743.186722] drm_framebuffer_free+0x3a/0x90 [drm]
[ 743.186750] ? trace_hardirqs_on+0x5f/0x120
[ 743.186754] drm_mode_object_put+0x51/0x70 [drm]
[ 743.186786] drm_fb_release+0x105/0x190 [drm]
[ 743.186812] ? rt_mutex_slowunlock+0x3aa/0x410
[ 743.186817] ? rt_spin_lock+0xea/0x1b0
[ 743.186819] drm_file_free+0x1e0/0x2c0 [drm]
[ 743.186843] drm_release_noglobal+0x91/0xf0 [drm]
[ 743.186865] __fput+0x100/0x2e0
[ 743.186869] fput_close_sync+0x40/0xa0
[ 743.186870] __x64_sys_close+0x3e/0x80
[ 743.186873] x64_sys_call+0xa07/0xa30
[ 743.186879] do_syscall_64+0xd8/0xab0
[ 743.186881] entry_SYSCALL_64_after_hwframe+0x4b/0x53
[ 743.186882] RIP: 0033:0x7ff37e567732
[ 743.186884] Code: 08 0f 85 a1 38 ff ff 49 89 fb 48 89 f0 48 89 d7 48 89 ce 4c 89 c2 4d 89 ca 4c 8b 44 24 08 4c 8b 4c 24 10 4c 89 5c 24 08 0f 05 <c3> 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 f3 0f 1e fa 55 bf 01 00
[ 743.186885] RSP: 002b:00007ffc818169a8 EFLAGS: 00000246 ORIG_RAX: 0000000000000003
[ 743.186886] RAX: ffffffffffffffda RBX: 00007ffc81816a30 RCX: 00007ff37e567732
[ 743.186887] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000012
[ 743.186888] RBP: 00007ffc818169d0 R08: 0000000000000000 R09: 0000000000000000
[ 743.186889] R10: 0000000000000000 R11: 0000000000000246 R12: 000055d60a7996e0
[ 743.186889] R13: 00007ffc81816a90 R14: 00007ffc81816a90 R15: 000055d60a782a30
[ 743.186892] </TASK>
[ 743.186893] Modules linked in: rfcomm snd_hrtimer xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT nf_reject_ipv4 xt_tcpudp xt_addrtype nft_compat x_tables nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables overlay cfg80211 bnep mtd_intel_dg snd_hda_codec_intelhdmi mtd snd_hda_codec_hdmi nls_utf8 mxm_wmi intel_wmi_thunderbolt gigabyte_wmi wmi_bmof xe drm_gpuvm drm_gpusvm_helper i2c_algo_bit drm_buddy drm_ttm_helper ttm video drm_suballoc_helper gpu_sched drm_client_lib drm_exec drm_display_helper cec drm_kunit_helpers drm_kms_helper kunit x86_pkg_temp_thermal intel_powerclamp coretemp snd_hda_codec_alc882 snd_hda_codec_realtek_lib snd_hda_codec_generic snd_hda_intel snd_soc_avs snd_soc_hda_codec snd_hda_ext_core snd_hda_codec snd_hwdep snd_hda_core snd_intel_dspcfg snd_soc_core snd_compress ac97_bus snd_pcm snd_seq snd_seq_device snd_timer i2c_i801 i2c_mux snd i2c_smbus btusb btrtl btbcm btmtk btintel bluetooth ecdh_generic rfkill ecc mei_me mei ioatdma dca wmi nfsd drm i2c_dev fuse nfnetlink
[ 743.186938] ---[ end trace 0000000000000000 ]---
And for property blobs:
void drm_mode_config_cleanup(struct drm_device *dev)
{
...
list_for_each_entry_safe(blob, bt, &dev->mode_config.property_blob_list,
head_global) {
drm_property_blob_put(blob);
}
Resulting in:
[ 371.072940] BUG: unable to handle page fault for address: 000001ffffffffff
[ 371.072944] #PF: supervisor read access in kernel mode
[ 371.072945] #PF: error_code(0x0000) - not-present page
[ 371.072947] PGD 0 P4D 0
[ 371.072950] Oops: Oops: 0000 [#1] SMP
[ 371.072953] CPU: 0 UID: 1000 PID: 3693 Comm: kwin_wayland Not tainted 7.0.0-rc1-valkyria+ #111 PREEMPT_{RT,(lazy)}
[ 371.072956] Hardware name: Gigabyte Technology Co., Ltd. X299 AORUS Gaming 3/X299 AORUS Gaming 3-CF, BIOS F8n 12/06/2021
[ 371.072957] RIP: 0010:drm_property_destroy_user_blobs+0x3b/0x90 [drm]
[ 371.073019] Code: 00 00 48 83 ec 10 48 8b 86 30 01 00 00 48 39 c3 74 59 48 89 c2 48 8d 48 c8 48 8b 00 4c 8d 60 c8 eb 04 4c 8d 60 c8 48 8b 71 40 <48> 39 16 0f 85 39 32 01 00 48 3b 50 08 0f 85 2f 32 01 00 48 89 70
[ 371.073021] RSP: 0018:ffffc90006a73de8 EFLAGS: 00010293
[ 371.073022] RAX: 000001ffffffffff RBX: ffff888118a1a930 RCX: ffff8881b92355c0
[ 371.073024] RDX: ffff8881b92355f8 RSI: 000001ffffffffff RDI: ffff888118be4000
[ 371.073025] RBP: ffffc90006a73e08 R08: ffff8881009b7300 R09: ffff888cecc5b000
[ 371.073026] R10: ffffc90006a73e90 R11: 0000000000000002 R12: 000001ffffffffc7
[ 371.073027] R13: ffff888118a1a980 R14: ffff88810b366d20 R15: ffff888118a1a970
[ 371.073028] FS: 00007f1faccbb280(0000) GS:ffff888cec2db000(0000) knlGS:0000000000000000
[ 371.073029] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 371.073030] CR2: 000001ffffffffff CR3: 000000010655c001 CR4: 00000000003706f0
[ 371.073031] Call Trace:
[ 371.073033] <TASK>
[ 371.073036] drm_file_free+0x1df/0x2a0 [drm]
[ 371.073077] drm_release_noglobal+0x7a/0xe0 [drm]
[ 371.073113] __fput+0xe2/0x2b0
[ 371.073118] fput_close_sync+0x40/0xa0
[ 371.073119] __x64_sys_close+0x3e/0x80
[ 371.073122] x64_sys_call+0xa07/0xa30
[ 371.073126] do_syscall_64+0xc0/0x840
[ 371.073130] entry_SYSCALL_64_after_hwframe+0x4b/0x53
[ 371.073132] RIP: 0033:0x7f1fb3501732
[ 371.073133] Code: 08 0f 85 a1 38 ff ff 49 89 fb 48 89 f0 48 89 d7 48 89 ce 4c 89 c2 4d 89 ca 4c 8b 44 24 08 4c 8b 4c 24 10 4c 89 5c 24 08 0f 05 <c3> 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 f3 0f 1e fa 55 bf 01 00
[ 371.073135] RSP: 002b:00007ffe8e6f0278 EFLAGS: 00000246 ORIG_RAX: 0000000000000003
[ 371.073136] RAX: ffffffffffffffda RBX: 00007ffe8e6f0300 RCX: 00007f1fb3501732
[ 371.073137] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000012
[ 371.073138] RBP: 00007ffe8e6f02a0 R08: 0000000000000000 R09: 0000000000000000
[ 371.073139] R10: 0000000000000000 R11: 0000000000000246 R12: 00005585ba46eea0
[ 371.073140] R13: 00007ffe8e6f0360 R14: 00007ffe8e6f0360 R15: 00005585ba458a30
[ 371.073143] </TASK>
[ 371.073144] Modules linked in: rfcomm snd_hrtimer xt_addrtype xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT nf_reject_ipv4 xt_tcpudp nft_compat x_tables nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables overlay cfg80211 bnep snd_hda_codec_intelhdmi snd_hda_codec_hdmi mtd_intel_dg mtd nls_utf8 wmi_bmof mxm_wmi gigabyte_wmi intel_wmi_thunderbolt xe drm_gpuvm drm_gpusvm_helper i2c_algo_bit drm_buddy drm_ttm_helper ttm video drm_suballoc_helper gpu_sched drm_client_lib drm_exec drm_display_helper cec drm_kunit_helpers drm_kms_helper kunit x86_pkg_temp_thermal intel_powerclamp coretemp snd_hda_codec_alc882 snd_hda_codec_realtek_lib snd_hda_codec_generic snd_hda_intel snd_soc_avs snd_soc_hda_codec snd_hda_ext_core snd_hda_codec snd_hwdep snd_hda_core snd_intel_dspcfg snd_soc_core snd_compress ac97_bus snd_pcm snd_seq snd_seq_device snd_timer i2c_i801 btusb i2c_mux i2c_smbus btrtl snd btbcm btmtk btintel bluetooth ecdh_generic rfkill ecc mei_me mei ioatdma dca wmi nfsd drm i2c_dev fuse nfnetlink
[ 371.073198] CR2: 000001ffffffffff
[ 371.073199] ---[ end trace 0000000000000000 ]---
Add a guard around file close, and ensure the warnings from drm_mode_config
do not trigger. Fix those by allowing an open reference to the file descriptor
and cleaning up the file linked list entry in drm_mode_config_cleanup().
Cc: <stable@vger.kernel.org> # v4.18+
Fixes: bee330f3d672 ("drm: Use srcu to protect drm_device.unplugged")
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patch.msgid.link/20260313151728.14990-4-dev@lankhorst.se
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
[ adapted drm_dbg_printer(dev, DRM_UT_KMS, ...) call to older drm_debug_printer(...) API ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 86259558e422b250aa6aa57163a6d759074573f5 upstream.
isl68137_avs_enable_show_page() uses the return value of
pmbus_read_byte_data() without checking for errors. If the I2C transaction
fails, a negative error code is passed through bitwise operations,
producing incorrect output.
Add an error check to propagate the return value if it is negative.
Additionally, modernize the callback by replacing sprintf()
with sysfs_emit().
Fixes: 038a9c3d1e424 ("hwmon: (pmbus/isl68137) Add driver for Intersil ISL68137 PWM Controller")
Cc: stable@vger.kernel.org
Signed-off-by: Sanman Pradhan <psanman@juniper.net>
Link: https://lore.kernel.org/r/20260318193952.47908-2-sanman.pradhan@hpe.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit b48731849609cbd8c53785a48976850b443153fd ]
Smatch reports:
drivers/net/dsa/bcm_sf2.c:997 bcm_sf2_sw_resume() warn:
'priv->clk' from clk_prepare_enable() not released on lines: 983,990.
The clock enabled by clk_prepare_enable() in bcm_sf2_sw_resume()
is not released if bcm_sf2_sw_rst() or bcm_sf2_cfp_resume() fails.
Add the missing clk_disable_unprepare() calls in the error paths
to properly release the clock resource.
Fixes: e9ec5c3bd238 ("net: dsa: bcm_sf2: request and handle clocks")
Reviewed-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Anas Iqbal <mohd.abd.6602@gmail.com>
Link: https://patch.msgid.link/20260318084212.1287-1-mohd.abd.6602@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8a63baadf08453f66eb582fdb6dd234f72024723 ]
mvpp2_bm_switch_buffers() unconditionally calls
mvpp2_bm_pool_update_priv_fc() when switching between per-cpu and
shared buffer pool modes. This function programs CM3 flow control
registers via mvpp2_cm3_read()/mvpp2_cm3_write(), which dereference
priv->cm3_base without any NULL check.
When the CM3 SRAM resource is not present in the device tree (the
third reg entry added by commit 60523583b07c ("dts: marvell: add CM3
SRAM memory to cp11x ethernet device tree")), priv->cm3_base remains
NULL and priv->global_tx_fc is false. Any operation that triggers
mvpp2_bm_switch_buffers(), for example an MTU change that crosses
the jumbo frame threshold, will crash:
Unable to handle kernel NULL pointer dereference at
virtual address 0000000000000000
Mem abort info:
ESR = 0x0000000096000006
EC = 0x25: DABT (current EL), IL = 32 bits
pc : readl+0x0/0x18
lr : mvpp2_cm3_read.isra.0+0x14/0x20
Call trace:
readl+0x0/0x18
mvpp2_bm_pool_update_fc+0x40/0x12c
mvpp2_bm_pool_update_priv_fc+0x94/0xd8
mvpp2_bm_switch_buffers.isra.0+0x80/0x1c0
mvpp2_change_mtu+0x140/0x380
__dev_set_mtu+0x1c/0x38
dev_set_mtu_ext+0x78/0x118
dev_set_mtu+0x48/0xa8
dev_ifsioc+0x21c/0x43c
dev_ioctl+0x2d8/0x42c
sock_ioctl+0x314/0x378
Every other flow control call site in the driver already guards
hardware access with either priv->global_tx_fc or port->tx_fc.
mvpp2_bm_switch_buffers() is the only place that omits this check.
Add the missing priv->global_tx_fc guard to both the disable and
re-enable calls in mvpp2_bm_switch_buffers(), consistent with the
rest of the driver.
Fixes: 3a616b92a9d1 ("net: mvpp2: Add TX flow control support for jumbo frames")
Signed-off-by: Muhammad Hammad Ijaz <mhijaz@amazon.com>
Reviewed-by: Gunnar Kudrjavets <gunnarku@amazon.com>
Link: https://patch.msgid.link/20260316193157.65748-1-mhijaz@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 605b52497bf89b3b154674deb135da98f916e390 ]
rlb_clear_slave intentionally keeps RLB hash-table entries on
the rx_hashtbl_used_head list with slave set to NULL when no
replacement slave is available. However, bond_debug_rlb_hash_show
visites client_info->slave without checking if it's NULL.
Other used-list iterators in bond_alb.c already handle this NULL-slave
state safely:
- rlb_update_client returns early on !client_info->slave
- rlb_req_update_slave_clients, rlb_clear_slave, and rlb_rebalance
compare slave values before visiting
- lb_req_update_subnet_clients continues if slave is NULL
The following NULL deref crash can be trigger in
bond_debug_rlb_hash_show:
[ 1.289791] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ 1.292058] RIP: 0010:bond_debug_rlb_hash_show (drivers/net/bonding/bond_debugfs.c:41)
[ 1.293101] RSP: 0018:ffffc900004a7d00 EFLAGS: 00010286
[ 1.293333] RAX: 0000000000000000 RBX: ffff888102b48200 RCX: ffff888102b48204
[ 1.293631] RDX: ffff888102b48200 RSI: ffffffff839daad5 RDI: ffff888102815078
[ 1.293924] RBP: ffff888102815078 R08: ffff888102b4820e R09: 0000000000000000
[ 1.294267] R10: 0000000000000000 R11: 0000000000000000 R12: ffff888100f929c0
[ 1.294564] R13: ffff888100f92a00 R14: 0000000000000001 R15: ffffc900004a7ed8
[ 1.294864] FS: 0000000001395380(0000) GS:ffff888196e75000(0000) knlGS:0000000000000000
[ 1.295239] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1.295480] CR2: 0000000000000000 CR3: 0000000102adc004 CR4: 0000000000772ef0
[ 1.295897] Call Trace:
[ 1.296134] seq_read_iter (fs/seq_file.c:231)
[ 1.296341] seq_read (fs/seq_file.c:164)
[ 1.296493] full_proxy_read (fs/debugfs/file.c:378 (discriminator 1))
[ 1.296658] vfs_read (fs/read_write.c:572)
[ 1.296981] ksys_read (fs/read_write.c:717)
[ 1.297132] do_syscall_64 (arch/x86/entry/syscall_64.c:63 (discriminator 1) arch/x86/entry/syscall_64.c:94 (discriminator 1))
[ 1.297325] entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
Add a NULL check and print "(none)" for entries with no assigned slave.
Fixes: caafa84251b88 ("bonding: add the debugfs interface to see RLB hash table")
Reported-by: Weiming Shi <bestswngs@gmail.com>
Signed-off-by: Xiang Mei <xmei5@asu.edu>
Link: https://patch.msgid.link/20260317005034.1888794-1-xmei5@asu.edu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 34b11cc56e4369bc08b1f4c4a04222d75ed596ce ]
If hardware doesn't support RX Flow Filters, rx_fs_lock spinlock is not
initialized leading to the following assertion splat triggerable via
set_rxnfc callback.
INFO: trying to register non-static key.
The code is fine but needs lockdep annotation, or maybe
you didn't initialize this object before use?
turning off the locking correctness validator.
CPU: 1 PID: 949 Comm: syz.0.6 Not tainted 6.1.164+ #113
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.1-0-g3208b098f51a-prebuilt.qemu.org 04/01/2014
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x8d/0xba lib/dump_stack.c:106
assign_lock_key kernel/locking/lockdep.c:974 [inline]
register_lock_class+0x141b/0x17f0 kernel/locking/lockdep.c:1287
__lock_acquire+0x74f/0x6c40 kernel/locking/lockdep.c:4928
lock_acquire kernel/locking/lockdep.c:5662 [inline]
lock_acquire+0x190/0x4b0 kernel/locking/lockdep.c:5627
__raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline]
_raw_spin_lock_irqsave+0x33/0x50 kernel/locking/spinlock.c:162
gem_del_flow_filter drivers/net/ethernet/cadence/macb_main.c:3562 [inline]
gem_set_rxnfc+0x533/0xac0 drivers/net/ethernet/cadence/macb_main.c:3667
ethtool_set_rxnfc+0x18c/0x280 net/ethtool/ioctl.c:961
__dev_ethtool net/ethtool/ioctl.c:2956 [inline]
dev_ethtool+0x229c/0x6290 net/ethtool/ioctl.c:3095
dev_ioctl+0x637/0x1070 net/core/dev_ioctl.c:510
sock_do_ioctl+0x20d/0x2c0 net/socket.c:1215
sock_ioctl+0x577/0x6d0 net/socket.c:1320
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:870 [inline]
__se_sys_ioctl fs/ioctl.c:856 [inline]
__x64_sys_ioctl+0x18c/0x210 fs/ioctl.c:856
do_syscall_x64 arch/x86/entry/common.c:46 [inline]
do_syscall_64+0x35/0x80 arch/x86/entry/common.c:76
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
A more straightforward solution would be to always initialize rx_fs_lock,
just like rx_fs_list. However, in this case the driver set_rxnfc callback
would return with a rather confusing error code, e.g. -EINVAL. So deny
set_rxnfc attempts directly if the RX filtering feature is not supported
by hardware.
Fixes: ae8223de3df5 ("net: macb: Added support for RX filtering")
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Link: https://patch.msgid.link/20260316103826.74506-2-pchelkin@ispras.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit bf504b229cb8d534eccbaeaa23eba34c05131e25 ]
After commi f132e089fe89 ("ACPI: processor: Fix NULL-pointer dereference
in acpi_processor_errata_piix4()"), device pointers may be dereferenced
after dropping references to the device objects pointed to by them,
which may cause a use-after-free to occur.
Moreover, debug messages about enabling the errata may be printed
if the errata flags corresponding to them are unset.
Address all of these issues by moving message printing to the points
in the code where the errata flags are set.
Fixes: f132e089fe89 ("ACPI: processor: Fix NULL-pointer dereference in acpi_processor_errata_piix4()")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Closes: https://lore.kernel.org/linux-acpi/938e2206-def5-4b7a-9b2c-d1fd37681d8a@roeck-us.net/
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/5975693.DvuYhMxLoT@rafael.j.wysocki
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit deb353d9bb009638b7762cae2d0b6e8fdbb41a69 ]
Since upstream commit e75665dd0968 ("wifi: wlcore: ensure skb headroom
before skb_push"), wl1271_tx_allocate() and with it
wl1271_prepare_tx_frame() returns -EAGAIN if pskb_expand_head() fails.
However, in wlcore_tx_work_locked(), a return value of -EAGAIN from
wl1271_prepare_tx_frame() is interpreted as the aggregation buffer being
full. This causes the code to flush the buffer, put the skb back at the
head of the queue, and immediately retry the same skb in a tight while
loop.
Because wlcore_tx_work_locked() holds wl->mutex, and the retry happens
immediately with GFP_ATOMIC, this will result in an infinite loop and a
CPU soft lockup. Return -ENOMEM instead so the packet is dropped and
the loop terminates.
The problem was found by an experimental code review agent based on
gemini-3.1-pro while reviewing backports into v6.18.y.
Assisted-by: Gemini:gemini-3.1-pro
Fixes: e75665dd0968 ("wifi: wlcore: ensure skb headroom before skb_push")
Cc: Peter Astrand <astrand@lysator.liu.se>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Link: https://patch.msgid.link/20260318064636.3065925-1-linux@roeck-us.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit fc9c69be594756b81b54c6bc40803fa6052f35ae ]
When iavf_add_vlan() finds an existing filter in IAVF_VLAN_REMOVE
state, it transitions the filter to IAVF_VLAN_ACTIVE assuming the
pending delete can simply be cancelled. However, there is no guarantee
that iavf_del_vlans() has not already processed the delete AQ request
and removed the filter from the PF. In that case the filter remains in
the driver's list as IAVF_VLAN_ACTIVE but is no longer programmed on
the NIC. Since iavf_add_vlans() only picks up filters in
IAVF_VLAN_ADD state, the filter is never re-added, and spoof checking
drops all traffic for that VLAN.
CPU0 CPU1 Workqueue
---- ---- ---------
iavf_del_vlan(vlan 100)
f->state = REMOVE
schedule AQ_DEL_VLAN
iavf_add_vlan(vlan 100)
f->state = ACTIVE
iavf_del_vlans()
f is ACTIVE, skip
iavf_add_vlans()
f is ACTIVE, skip
Filter is ACTIVE in driver but absent from NIC.
Transition to IAVF_VLAN_ADD instead and schedule
IAVF_FLAG_AQ_ADD_VLAN_FILTER so iavf_add_vlans() re-programs the
filter. A duplicate add is idempotent on the PF.
Fixes: 0c0da0e95105 ("iavf: refactor VLAN filter states")
Signed-off-by: Petr Oros <poros@redhat.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0ffba246652faf4a36aedc66059c2f94e4c83ea5 ]
igc_xmit_frame() misses updating skb->tail when the packet size is
shorter than the minimum one.
Use skb_put_padto() in alignment with other Intel Ethernet drivers.
Fixes: 0507ef8a0372 ("igc: Add transmit and receive fastpath and interrupt handlers")
Signed-off-by: Kohei Enju <kohei@enjuk.jp>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Avigail Dahan <avigailx.dahan@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 069c8f5aebe4d5224cf62acc7d4b3486091c658a ]
syzbot reports "task hung in rpm_resume"
This is caused by aqc111_suspend calling
the PM variant of its write_cmd routine.
The simplified call trace looks like this:
rpm_suspend()
usb_suspend_both() - here udev->dev.power.runtime_status == RPM_SUSPENDING
aqc111_suspend() - called for the usb device interface
aqc111_write32_cmd()
usb_autopm_get_interface()
pm_runtime_resume_and_get()
rpm_resume() - here we call rpm_resume() on our parent
rpm_resume() - Here we wait for a status change that will never happen.
At this point we block another task which holds
rtnl_lock and locks up the whole networking stack.
Fix this by replacing the write_cmd calls with their _nopm variants
Reported-by: syzbot+48dc1e8dfc92faf1124c@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=48dc1e8dfc92faf1124c
Fixes: e58ba4544c77 ("net: usb: aqc111: Add support for wake on LAN by MAGIC packet")
Signed-off-by: Nikola Z. Ivanov <zlatistiv@gmail.com>
Link: https://patch.msgid.link/20260313141643.1181386-1-zlatistiv@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 29ab768277617452d88c0607c9299cdc63b6e9ff ]
The following code in pm_runtime_work() may dereference the dev->parent
pointer after the parent device has been freed:
/* Maybe the parent is now able to suspend. */
if (parent && !parent->power.ignore_children) {
spin_unlock(&dev->power.lock);
spin_lock(&parent->power.lock);
rpm_idle(parent, RPM_ASYNC);
spin_unlock(&parent->power.lock);
spin_lock(&dev->power.lock);
}
Fix this by inserting a flush_work() call in pm_runtime_remove().
Without this patch blktest block/001 triggers the following complaint
sporadically:
BUG: KASAN: slab-use-after-free in lock_acquire+0x70/0x160
Read of size 1 at addr ffff88812bef7198 by task kworker/u553:1/3081
Workqueue: pm pm_runtime_work
Call Trace:
<TASK>
dump_stack_lvl+0x61/0x80
print_address_description.constprop.0+0x8b/0x310
print_report+0xfd/0x1d7
kasan_report+0xd8/0x1d0
__kasan_check_byte+0x42/0x60
lock_acquire.part.0+0x38/0x230
lock_acquire+0x70/0x160
_raw_spin_lock+0x36/0x50
rpm_suspend+0xc6a/0xfe0
rpm_idle+0x578/0x770
pm_runtime_work+0xee/0x120
process_one_work+0xde3/0x1410
worker_thread+0x5eb/0xfe0
kthread+0x37b/0x480
ret_from_fork+0x6cb/0x920
ret_from_fork_asm+0x11/0x20
</TASK>
Allocated by task 4314:
kasan_save_stack+0x2a/0x50
kasan_save_track+0x18/0x40
kasan_save_alloc_info+0x3d/0x50
__kasan_kmalloc+0xa0/0xb0
__kmalloc_noprof+0x311/0x990
scsi_alloc_target+0x122/0xb60 [scsi_mod]
__scsi_scan_target+0x101/0x460 [scsi_mod]
scsi_scan_channel+0x179/0x1c0 [scsi_mod]
scsi_scan_host_selected+0x259/0x2d0 [scsi_mod]
store_scan+0x2d2/0x390 [scsi_mod]
dev_attr_store+0x43/0x80
sysfs_kf_write+0xde/0x140
kernfs_fop_write_iter+0x3ef/0x670
vfs_write+0x506/0x1470
ksys_write+0xfd/0x230
__x64_sys_write+0x76/0xc0
x64_sys_call+0x213/0x1810
do_syscall_64+0xee/0xfc0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
Freed by task 4314:
kasan_save_stack+0x2a/0x50
kasan_save_track+0x18/0x40
kasan_save_free_info+0x3f/0x50
__kasan_slab_free+0x67/0x80
kfree+0x225/0x6c0
scsi_target_dev_release+0x3d/0x60 [scsi_mod]
device_release+0xa3/0x220
kobject_cleanup+0x105/0x3a0
kobject_put+0x72/0xd0
put_device+0x17/0x20
scsi_device_dev_release+0xacf/0x12c0 [scsi_mod]
device_release+0xa3/0x220
kobject_cleanup+0x105/0x3a0
kobject_put+0x72/0xd0
put_device+0x17/0x20
scsi_device_put+0x7f/0xc0 [scsi_mod]
sdev_store_delete+0xa5/0x120 [scsi_mod]
dev_attr_store+0x43/0x80
sysfs_kf_write+0xde/0x140
kernfs_fop_write_iter+0x3ef/0x670
vfs_write+0x506/0x1470
ksys_write+0xfd/0x230
__x64_sys_write+0x76/0xc0
x64_sys_call+0x213/0x1810
Reported-by: Ming Lei <ming.lei@redhat.com>
Closes: https://lore.kernel.org/all/ZxdNvLNI8QaOfD2d@fedora/
Reported-by: syzbot+6c905ab800f20cf4086c@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/68c13942.050a0220.2ff435.000b.GAE@google.com/
Fixes: 5e928f77a09a ("PM: Introduce core framework for run-time PM of I/O devices (rev. 17)")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260312182720.2776083-1-bvanassche@acm.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
teardown
[ Upstream commit fa103fc8f56954a60699a29215cb713448a39e87 ]
A potential race condition exists in mana_hwc_destroy_channel() where
hwc->caller_ctx is freed before the HWC's Completion Queue (CQ) and
Event Queue (EQ) are destroyed. This allows an in-flight CQ interrupt
handler to dereference freed memory, leading to a use-after-free or
NULL pointer dereference in mana_hwc_handle_resp().
mana_smc_teardown_hwc() signals the hardware to stop but does not
synchronize against IRQ handlers already executing on other CPUs. The
IRQ synchronization only happens in mana_hwc_destroy_cq() via
mana_gd_destroy_eq() -> mana_gd_deregister_irq(). Since this runs
after kfree(hwc->caller_ctx), a concurrent mana_hwc_rx_event_handler()
can dereference freed caller_ctx (and rxq->msg_buf) in
mana_hwc_handle_resp().
Fix this by reordering teardown to reverse-of-creation order: destroy
the TX/RX work queues and CQ/EQ before freeing hwc->caller_ctx. This
ensures all in-flight interrupt handlers complete before the memory they
access is freed.
Fixes: ca9c54d2d6a5 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)")
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Dipayaan Roy <dipayanroy@linux.microsoft.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/abHA3AjNtqa1nx9k@linuxonhyperv3.guj3yctzbm1etfxqx2vob5hsef.xx.internal.cloudapp.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6cfc3bc02b977f2fba5f7268e6504d1931a774f7 ]
Some systems require more than 5ms to get into WoL mode. Increase the
timeout value to 50ms.
Fixes: c51de7f3976b ("net: bcmgenet: add Wake-on-LAN support code")
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20260312191852.3904571-1-justin.chen@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 99b2c531e0e797119ae1b9195a8764ee98b00e65 ]
WCN3998 uses a bit different format for rom version:
[ 5.479978] Bluetooth: hci0: setting up wcn399x
[ 5.633763] Bluetooth: hci0: QCA Product ID :0x0000000a
[ 5.645350] Bluetooth: hci0: QCA SOC Version :0x40010224
[ 5.650906] Bluetooth: hci0: QCA ROM Version :0x00001001
[ 5.665173] Bluetooth: hci0: QCA Patch Version:0x00006699
[ 5.679356] Bluetooth: hci0: QCA controller version 0x02241001
[ 5.691109] Bluetooth: hci0: QCA Downloading qca/crbtfw21.tlv
[ 6.680102] Bluetooth: hci0: QCA Downloading qca/crnv21.bin
[ 6.842948] Bluetooth: hci0: QCA setup on UART is completed
Fixes: 523760b7ff88 ("Bluetooth: hci_qca: Added support for WCN3998")
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 879c001afbac3df94160334fe5117c0c83b2cf48 ]
A device_node reference obtained from the device tree is not released
on all error paths in the arm_scpi probe path. Specifically, a node
returned by of_parse_phandle() could be leaked when the probe failed
after the node was acquired. The probe function returns early and
the shmem reference is not released.
Use __free(device_node) scope-based cleanup to automatically release
the reference when the variable goes out of scope.
Fixes: ed7ecb883901 ("firmware: arm_scpi: Add compatibility checks for shmem node")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Message-Id: <20260121-arm_scpi_2-v2-1-702d7fa84acb@gmail.com>
Signed-off-by: Sudeep Holla <sudeep.holla@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 014077044e874e270ec480515edbc1cadb976cf2 ]
When QMAN_FQ_FLAG_DYNAMIC_FQID is set, there's a race condition between
fq_table[fq->idx] state and freeing/allocating from the pool and
WARN_ON(fq_table[fq->idx]) in qman_create_fq() gets triggered.
Indeed, we can have:
Thread A Thread B
qman_destroy_fq() qman_create_fq()
qman_release_fqid()
qman_shutdown_fq()
gen_pool_free()
-- At this point, the fqid is available again --
qman_alloc_fqid()
-- so, we can get the just-freed fqid in thread B --
fq->fqid = fqid;
fq->idx = fqid * 2;
WARN_ON(fq_table[fq->idx]);
fq_table[fq->idx] = fq;
fq_table[fq->idx] = NULL;
And adding some logs between qman_release_fqid() and
fq_table[fq->idx] = NULL makes the WARN_ON() trigger a lot more.
To prevent that, ensure that fq_table[fq->idx] is set to NULL before
gen_pool_free() is called by using smp_wmb().
Fixes: c535e923bb97 ("soc/fsl: Introduce DPAA 1.x QMan device driver")
Signed-off-by: Richard Genoud <richard.genoud@bootlin.com>
Tested-by: CHAMPSEIX Thomas <thomas.champseix@alstomgroup.com>
Link: https://lore.kernel.org/r/20251223072549.397625-1-richard.genoud@bootlin.com
Signed-off-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 9abf79c8d7b40db0e5a34aa8c744ea60ff9a3fcf upstream.
Previously program_hpx_type2() applied PCIe settings unconditionally,
which could incorrectly change bits like Extended Tag Field Enable and
Enable Relaxed Ordering.
When _HPX was added to ACPI r3.0, the intent of the PCIe Setting
Record (Type 2) in sec 6.2.7.3 was to configure AER registers when the
OS does not own the AER Capability:
The PCI Express setting record contains ... [the AER] Uncorrectable
Error Mask, Uncorrectable Error Severity, Correctable Error Mask
... to be used when configuring registers in the Advanced Error
Reporting Extended Capability Structure ...
OSPM [1] will only evaluate _HPX with Setting Record – Type 2 if
OSPM is not controlling the PCI Express Advanced Error Reporting
capability.
ACPI r3.0b, sec 6.2.7.3, added more AER registers, including registers
in the PCIe Capability with AER-related bits, and the restriction that
the OS use this only when it owns PCIe native hotplug:
... when configuring PCI Express registers in the Advanced Error
Reporting Extended Capability Structure *or PCI Express Capability
Structure* ...
An OS that has assumed ownership of native hot plug but does not
... have ownership of the AER register set must use ... the Type 2
record to program the AER registers ...
However, since the Type 2 record also includes register bits that
have functions other than AER, the OS must ignore values ... that
are not applicable.
Restrict program_hpx_type2() to only the intended purpose:
- Apply settings only when OS owns PCIe native hotplug but not AER,
- Only touch the AER-related bits (Error Reporting Enables) in Device
Control
- Don't touch Link Control at all, since nothing there seems AER-related,
but log _HPX settings for debugging purposes
Note that Read Completion Boundary is now configured elsewhere, since it is
unrelated to _HPX.
[1] Operating System-directed configuration and Power Management
Fixes: 40abb96c51bb ("[PATCH] pciehp: Fix programming hotplug parameters")
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260129175237.727059-3-haakon.bugge@oracle.com
[ Conflict in drivers/pci.h because the context has changed. ]
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 14eb64db8ff07b58a35b98375f446d9e20765674 upstream.
The dwmac databook for v3.74a states that lpi_intr_o is a sideband
signal which should be used to ungate the application clock, and this
signal is synchronous to the receive clock. The receive clock can run
at 2.5, 25 or 125MHz depending on the media speed, and can stop under
the control of the link partner. This means that the time it takes to
clear is dependent on the negotiated media speed, and thus can be 8,
40, or 400ns after reading the LPI control and status register.
It has been observed with some aggressive link partners, this clock
can stop while lpi_intr_o is still asserted, meaning that the signal
remains asserted for an indefinite period that the local system has
no direct control over.
The LPI interrupts will still be signalled through the main interrupt
path in any case, and this path is not dependent on the receive clock.
This, since we do not gate the application clock, and the chances of
adding clock gating in the future are slim due to the clocks being
ill-defined, lpi_intr_o serves no useful purpose. Remove the code which
requests the interrupt, and all associated code.
Reported-by: Ovidiu Panait <ovidiu.panait.rb@renesas.com>
Tested-by: Ovidiu Panait <ovidiu.panait.rb@renesas.com> # Renesas RZ/V2H board
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vnJbt-00000007YYN-28nm@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Ovidiu Panait <ovidiu.panait.rb@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 1253685f0d3eb3eab0bfc4bf15ab341a5f3da0c8 ]
Once command submission failed due to userptr invalidation in
amdgpu_cs_submit, legacy code will perform cleanup of scheduler
job. However, it's not needed at all, as former commit has integrated
job cleanup stuff into amdgpu_job_free. Otherwise, because of double
free, a NULL pointer dereference will occur in such scenario.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2457
Fixes: f7d66fb2ea43 ("drm/amdgpu: cleanup scheduler job initialization v2")
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[ Adjust context. The context change is irrelevant
to the current patch logic. ]
Signed-off-by: Alva Lan <alvalan9@foxmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 7446284023e8ef694fb392348185349c773eefb3 ]
driver support indirect read and indirect write operation with
assumption no force device removal(unbind) operation. However
force device removal(removal) is still available to root superuser.
Unbinding driver during operation causes kernel crash. This changes
ensure driver able to handle such operation for indirect read and
indirect write by implementing refcount to track attached devices
to the controller and gracefully wait and until attached devices
remove operation completed before proceed with removal operation.
Signed-off-by: Khairul Anuar Romli <khairul.anuar.romli@altera.com>
Reviewed-by: Matthew Gerlach <matthew.gerlach@altera.com>
Reviewed-by: Niravkumar L Rabara <nirav.rabara@altera.com>
Link: https://patch.msgid.link/8704fd6bd2ff4d37bba4a0eacf5eba3ba001079e.1756168074.git.khairul.anuar.romli@altera.com
Signed-off-by: Mark Brown <broonie@kernel.org>
[Add cqspi defination in cqspi_exec_mem_op and minor context change fixed.]
Signed-off-by: Robert Garcia <rob_garcia@163.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit f0aa6a37a3dbb40b272df5fc6db93c114688adcd ]
Recalculate features when XDP is detached.
Before:
# ip li set dev eth0 xdp obj xdp_dummy.bpf.o sec xdp
# ip li set dev eth0 xdp off
# ethtool -k eth0 | grep gro
rx-gro-hw: off [requested on]
After:
# ip li set dev eth0 xdp obj xdp_dummy.bpf.o sec xdp
# ip li set dev eth0 xdp off
# ethtool -k eth0 | grep gro
rx-gro-hw: on
The fact that HW-GRO doesn't get re-enabled automatically is just
a minor annoyance. The real issue is that the features will randomly
come back during another reconfiguration which just happens to invoke
netdev_update_features(). The driver doesn't handle reconfiguring
two things at a time very robustly.
Starting with commit 98ba1d931f61 ("bnxt_en: Fix RSS logic in
__bnxt_reserve_rings()") we only reconfigure the RSS hash table
if the "effective" number of Rx rings has changed. If HW-GRO is
enabled "effective" number of rings is 2x what user sees.
So if we are in the bad state, with HW-GRO re-enablement "pending"
after XDP off, and we lower the rings by / 2 - the HW-GRO rings
doing 2x and the ethtool -L doing / 2 may cancel each other out,
and the:
if (old_rx_rings != bp->hw_resc.resv_rx_rings &&
condition in __bnxt_reserve_rings() will be false.
The RSS map won't get updated, and we'll crash with:
BUG: kernel NULL pointer dereference, address: 0000000000000168
RIP: 0010:__bnxt_hwrm_vnic_set_rss+0x13a/0x1a0
bnxt_hwrm_vnic_rss_cfg_p5+0x47/0x180
__bnxt_setup_vnic_p5+0x58/0x110
bnxt_init_nic+0xb72/0xf50
__bnxt_open_nic+0x40d/0xab0
bnxt_open_nic+0x2b/0x60
ethtool_set_channels+0x18c/0x1d0
As we try to access a freed ring.
The issue is present since XDP support was added, really, but
prior to commit 98ba1d931f61 ("bnxt_en: Fix RSS logic in
__bnxt_reserve_rings()") it wasn't causing major issues.
Fixes: 1054aee82321 ("bnxt_en: Use NETIF_F_GRO_HW.")
Fixes: 98ba1d931f61 ("bnxt_en: Fix RSS logic in __bnxt_reserve_rings()")
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Link: https://patch.msgid.link/20250109043057.2888953-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ The context change is due to the commit 1f6e77cb9b32
("bnxt_en: Add bnxt_l2_filter hash table.") in v6.8 and the commit
8336a974f37d ("bnxt_en: Save user configured filters in a lookup list")
in v6.9 which are irrelevant to the logic of this patch. ]
Signed-off-by: Rahul Sharma <black.hawk@163.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
variables related to memory alloc/free
commit 52b330799e2d6f825ae2bb74662ec1b10eb954bb upstream.
Exynos Virtual Display driver performs memory alloc/free operations
without lock protection, which easily causes concurrency problem.
For example, use-after-free can occur in race scenario like this:
```
CPU0 CPU1 CPU2
---- ---- ----
vidi_connection_ioctl()
if (vidi->connection) // true
drm_edid = drm_edid_alloc(); // alloc drm_edid
...
ctx->raw_edid = drm_edid;
...
drm_mode_getconnector()
drm_helper_probe_single_connector_modes()
vidi_get_modes()
if (ctx->raw_edid) // true
drm_edid_dup(ctx->raw_edid);
if (!drm_edid) // false
...
vidi_connection_ioctl()
if (vidi->connection) // false
drm_edid_free(ctx->raw_edid); // free drm_edid
...
drm_edid_alloc(drm_edid->edid)
kmemdup(edid); // UAF!!
...
```
To prevent these vulns, at least in vidi_context, member variables related
to memory alloc/free should be protected with ctx->lock.
Cc: <stable@vger.kernel.org>
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d4c98c077c7fb2dfdece7d605e694b5ea2665085 upstream.
In vidi_connection_ioctl(), vidi->edid(user pointer) is directly
dereferenced in the kernel.
This allows arbitrary kernel memory access from the user space, so instead
of directly accessing the user pointer in the kernel, we should modify it
to copy edid to kernel memory using copy_from_user() and use it.
Cc: <stable@vger.kernel.org>
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d3968a0d85b211e197f2f4f06268a7031079e0d0 upstream.
vidi_connection_ioctl() retrieves the driver_data from drm_dev->dev to
obtain a struct vidi_context pointer. However, drm_dev->dev is the
exynos-drm master device, and the driver_data contained therein is not
the vidi component device, but a completely different device.
This can lead to various bugs, ranging from null pointer dereferences and
garbage value accesses to, in unlucky cases, out-of-bounds errors,
use-after-free errors, and more.
To resolve this issue, we need to store/delete the vidi device pointer in
exynos_drm_private->vidi_dev during bind/unbind, and then read this
exynos_drm_private->vidi_dev within ioctl() to obtain the correct
struct vidi_context pointer.
Cc: <stable@vger.kernel.org>
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3d970eda003441f66551a91fda16478ac0711617 upstream.
Currently, interrupts are automatically enabled immediately upon
request. This allows interrupt to fire before the associated NAPI
context is fully initialized and cause failures like below:
[ 0.946369] Call Trace:
[ 0.946369] <IRQ>
[ 0.946369] __napi_poll+0x2a/0x1e0
[ 0.946369] net_rx_action+0x2f9/0x3f0
[ 0.946369] handle_softirqs+0xd6/0x2c0
[ 0.946369] ? handle_edge_irq+0xc1/0x1b0
[ 0.946369] __irq_exit_rcu+0xc3/0xe0
[ 0.946369] common_interrupt+0x81/0xa0
[ 0.946369] </IRQ>
[ 0.946369] <TASK>
[ 0.946369] asm_common_interrupt+0x22/0x40
[ 0.946369] RIP: 0010:pv_native_safe_halt+0xb/0x10
Use the `IRQF_NO_AUTOEN` flag when requesting interrupts to prevent auto
enablement and explicitly enable the interrupt in NAPI initialization
path (and disable it during NAPI teardown).
This ensures that interrupt lifecycle is strictly coupled with
readiness of NAPI context.
Cc: stable@vger.kernel.org
Fixes: 1dfc2e46117e ("gve: Refactor napi add and remove functions")
Signed-off-by: Ankit Garg <nktgrg@google.com>
Reviewed-by: Jordan Rhee <jordanrhee@google.com>
Reviewed-by: Joshua Washington <joshwash@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
Link: https://patch.msgid.link/20251219102945.2193617-1-hramamurthy@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
[ modified to re-introduce the irq member to struct gve_notify_block,
which was introuduced in commit 9a5e0776d11f ("gve: Avoid rescheduling
napi if on wrong cpu"). ]
Signed-off-by: Joshua Washington <joshwash@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e1aa5ef892fb4fa9014a25e87b64b97347919d37 upstream.
Current clk_csr_i setting of Loongson STMMAC (including LS7A1000/2000
and LS2K1000/2000/3000) are copy & paste from other drivers. In fact,
Loongson STMMAC use 125MHz clocks and need 62 freq division to within
2.5MHz, meeting most PHY MDC requirement. So fix by setting clk_csr_i
to 100-150MHz, otherwise some PHYs may link fail.
Cc: stable@vger.kernel.org
Fixes: 30bba69d7db40e7 ("stmmac: pci: Add dwmac support for Loongson")
Signed-off-by: Hongliang Wang <wanghongliang@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Link: https://patch.msgid.link/20260203062901.2158236-1-chenhuacai@loongson.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 549e91a9bbaa0ee480f59357868421a61d369770 ]
ufshcd_queuecommand() may be called two times in a row for a SCSI command
before it is completed. Hence make the following changes:
- In the functions that submit a command, do not check the old value of
lrbp->cmd nor clear lrbp->cmd in error paths.
- In ufshcd_release_scsi_cmd(), do not clear lrbp->cmd.
See also scsi_send_eh_cmnd().
This commit prevents that the following appears if a command times out:
WARNING: at drivers/ufs/core/ufshcd.c:2965 ufshcd_queuecommand+0x6f8/0x9a8
Call trace:
ufshcd_queuecommand+0x6f8/0x9a8
scsi_send_eh_cmnd+0x2c0/0x960
scsi_eh_test_devices+0x100/0x314
scsi_eh_ready_devs+0xd90/0x114c
scsi_error_handler+0x2b4/0xb70
kthread+0x16c/0x1e0
Fixes: 5a0b0cb9bee7 ("[SCSI] ufs: Add support for sending NOP OUT UPIU")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230524203659.1394307-3-bvanassche@acm.org
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
[ Removed the change in ufshcd_advanced_rpmb_req_handler() due to missing
commit:6ff265fc5ef6("scsi: ufs: core: bsg: Add advanced RPMB support in ufs_bsg") ]
Signed-off-by: Rajani Kantha <681739313@139.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit d9f3e47d3fae0c101d9094bc956ed24e7a0ee801 ]
There are two problems with the recursive correction:
1. It may cause denial-of-service. In fec_read_bufs, there is a loop that
has 253 iterations. For each iteration, we may call verity_hash_for_block
recursively. There is a limit of 4 nested recursions - that means that
there may be at most 253^4 (4 billion) iterations. Red Hat QE team
actually created an image that pushes dm-verity to this limit - and this
image just makes the udev-worker process get stuck in the 'D' state.
2. It doesn't work. In fec_read_bufs we store data into the variable
"fio->bufs", but fio bufs is shared between recursive invocations, if
"verity_hash_for_block" invoked correction recursively, it would
overwrite partially filled fio->bufs.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reported-by: Guangwu Zhang <guazhang@redhat.com>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Eric Biggers <ebiggers@kernel.org>
[ The context change is due to the commit bdf253d580d7
("dm-verity: remove support for asynchronous hashes")
in v6.18 and the commit 9356fcfe0ac4
("dm verity: set DM_TARGET_SINGLETON feature flag") in v6.9
which are irrelevant to the logic of this patch. ]
Signed-off-by: Rahul Sharma <black.hawk@163.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit e15c5506dd39885cd047f811a64240e2e8ab401b ]
In the previous implementation, vf_state is allocated memory only when VF
is enabled. However, net_device_ops::ndo_set_vf_mac() may be called before
VF is enabled to configure the MAC address of VF. If this is the case,
enetc_pf_set_vf_mac() will access vf_state, resulting in access to a null
pointer. The simplified error log is as follows.
root@ls1028ardb:~# ip link set eno0 vf 1 mac 00:0c:e7:66:77:89
[ 173.543315] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000004
[ 173.637254] pc : enetc_pf_set_vf_mac+0x3c/0x80 Message from sy
[ 173.641973] lr : do_setlink+0x4a8/0xec8
[ 173.732292] Call trace:
[ 173.734740] enetc_pf_set_vf_mac+0x3c/0x80
[ 173.738847] __rtnl_newlink+0x530/0x89c
[ 173.742692] rtnl_newlink+0x50/0x7c
[ 173.746189] rtnetlink_rcv_msg+0x128/0x390
[ 173.750298] netlink_rcv_skb+0x60/0x130
[ 173.754145] rtnetlink_rcv+0x18/0x24
[ 173.757731] netlink_unicast+0x318/0x380
[ 173.761665] netlink_sendmsg+0x17c/0x3c8
Fixes: d4fd0404c1c9 ("enetc: Introduce basic PF and VF ENETC ethernet drivers")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20241031060247.1290941-2-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Rahul Sharma <black.hawk@163.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
