| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
[ Upstream commit 0e1677654259a2f3ccf728de1edde922a3c4ba57 ]
A race condition was found in sg_proc_debug_helper(). It was observed on
a system using an IBM LTO-9 SAS Tape Drive (ULTRIUM-TD9) and monitoring
/proc/scsi/sg/debug every second. A very large elapsed time would
sometimes appear. This is caused by two race conditions.
We reproduced the issue with an IBM ULTRIUM-HH9 tape drive on an x86_64
architecture. A patched kernel was built, and the race condition could
not be observed anymore after the application of this patch. A
reproducer C program utilising the scsi_debug module was also built by
Changhui Zhong and can be viewed here:
https://github.com/MichaelRabek/linux-tests/blob/master/drivers/scsi/sg/sg_race_trigger.c
The first race happens between the reading of hp->duration in
sg_proc_debug_helper() and request completion in sg_rq_end_io(). The
hp->duration member variable may hold either of two types of
information:
#1 - The start time of the request. This value is present while
the request is not yet finished.
#2 - The total execution time of the request (end_time - start_time).
If sg_proc_debug_helper() executes *after* the value of hp->duration was
changed from #1 to #2, but *before* srp->done is set to 1 in
sg_rq_end_io(), a fresh timestamp is taken in the else branch, and the
elapsed time (value type #2) is subtracted from a timestamp, which
cannot yield a valid elapsed time (which is a type #2 value as well).
To fix this issue, the value of hp->duration must change under the
protection of the sfp->rq_list_lock in sg_rq_end_io(). Since
sg_proc_debug_helper() takes this read lock, the change to srp->done and
srp->header.duration will happen atomically from the perspective of
sg_proc_debug_helper() and the race condition is thus eliminated.
The second race condition happens between sg_proc_debug_helper() and
sg_new_write(). Even though hp->duration is set to the current time
stamp in sg_add_request() under the write lock's protection, it gets
overwritten by a call to get_sg_io_hdr(), which calls copy_from_user()
to copy struct sg_io_hdr from userspace into kernel space. hp->duration
is set to the start time again in sg_common_write(). If
sg_proc_debug_helper() is called between these two calls, an arbitrary
value set by userspace (usually zero) is used to compute the elapsed
time.
To fix this issue, hp->duration must be set to the current timestamp
again after get_sg_io_hdr() returns successfully. A small race window
still exists between get_sg_io_hdr() and setting hp->duration, but this
window is only a few instructions wide and does not result in observable
issues in practice, as confirmed by testing.
Additionally, we fix the format specifier from %d to %u for printing
unsigned int values in sg_proc_debug_helper().
Signed-off-by: Michal Rábek <mrabek@redhat.com>
Suggested-by: Tomas Henzl <thenzl@redhat.com>
Tested-by: Changhui Zhong <czhong@redhat.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Reviewed-by: John Meneghini <jmeneghi@redhat.com>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Link: https://patch.msgid.link/20251212160900.64924-1-mrabek@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit efc4c35b741af973de90f6826bf35d3b3ac36bf1 ]
Fix inconsistent error handling for sscanf() return value check.
Implicit boolean conversion is used instead of explicit return
value checks. The code checks if (!sscanf(...)) which is incorrect
because:
1. sscanf returns the number of successfully parsed items
2. On success, it returns 1 (one item passed)
3. On failure, it returns 0 or EOF
4. The check 'if (!sscanf(...))' is wrong because it treats
success (1) as failure
All occurrences of sscanf() now uses explicit return value check.
With this behavior it returns '-EINVAL' when parsing fails (returns
0 or EOF), and continues when parsing succeeds (returns 1).
Signed-off-by: Sumeet Pawnikar <sumeet4linux@gmail.com>
[ rjw: Subject and changelog edits ]
Link: https://patch.msgid.link/20251207151549.202452-1-sumeet4linux@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7bda1910c4bccd4b8d4726620bb3d6bbfb62286e ]
The device becomes visible to userspace via device_register()
even before it fully initialized by idr_init(). If userspace
or another thread tries to register a zone immediately after
device_register(), the control_type_valid() will fail because
the control_type is not yet in the list. The IDR is not yet
initialized, so this race condition causes zone registration
failure.
Move idr_init() and list addition before device_register()
fix the race condition.
Signed-off-by: Sumeet Pawnikar <sumeet4linux@gmail.com>
[ rjw: Subject adjustment, empty line added ]
Link: https://patch.msgid.link/20251205190216.5032-1-sumeet4linux@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit ebc18e9854e5a2b62a041fb57b216a903af45b85 upstream.
The gpio_chip settings in this driver say the controller can't sleep
but it actually uses a mutex for synchronization. This triggers the
following BUG():
[ 9.233659] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:281
[ 9.233665] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 554, name: (udev-worker)
[ 9.233669] preempt_count: 1, expected: 0
[ 9.233673] RCU nest depth: 0, expected: 0
[ 9.233688] Tainted: [W]=WARN
[ 9.233690] Hardware name: Dell Inc. Latitude 7455/0FK7MX, BIOS 2.10.1 05/20/2025
[ 9.233694] Call trace:
[ 9.233696] show_stack+0x24/0x38 (C)
[ 9.233709] dump_stack_lvl+0x40/0x88
[ 9.233716] dump_stack+0x18/0x24
[ 9.233722] __might_resched+0x148/0x160
[ 9.233731] __might_sleep+0x38/0x98
[ 9.233736] mutex_lock+0x30/0xd8
[ 9.233749] lpi_config_set+0x2e8/0x3c8 [pinctrl_lpass_lpi]
[ 9.233757] lpi_gpio_direction_output+0x58/0x90 [pinctrl_lpass_lpi]
[ 9.233761] gpiod_direction_output_raw_commit+0x110/0x428
[ 9.233772] gpiod_direction_output_nonotify+0x234/0x358
[ 9.233779] gpiod_direction_output+0x38/0xd0
[ 9.233786] gpio_shared_proxy_direction_output+0xb8/0x2a8 [gpio_shared_proxy]
[ 9.233792] gpiod_direction_output_raw_commit+0x110/0x428
[ 9.233799] gpiod_direction_output_nonotify+0x234/0x358
[ 9.233806] gpiod_configure_flags+0x2c0/0x580
[ 9.233812] gpiod_find_and_request+0x358/0x4f8
[ 9.233819] gpiod_get_index+0x7c/0x98
[ 9.233826] devm_gpiod_get+0x34/0xb0
[ 9.233829] reset_gpio_probe+0x58/0x128 [reset_gpio]
[ 9.233836] auxiliary_bus_probe+0xb0/0xf0
[ 9.233845] really_probe+0x14c/0x450
[ 9.233853] __driver_probe_device+0xb0/0x188
[ 9.233858] driver_probe_device+0x4c/0x250
[ 9.233863] __driver_attach+0xf8/0x2a0
[ 9.233868] bus_for_each_dev+0xf8/0x158
[ 9.233872] driver_attach+0x30/0x48
[ 9.233876] bus_add_driver+0x158/0x2b8
[ 9.233880] driver_register+0x74/0x118
[ 9.233886] __auxiliary_driver_register+0x94/0xe8
[ 9.233893] init_module+0x34/0xfd0 [reset_gpio]
[ 9.233898] do_one_initcall+0xec/0x300
[ 9.233903] do_init_module+0x64/0x260
[ 9.233910] load_module+0x16c4/0x1900
[ 9.233915] __arm64_sys_finit_module+0x24c/0x378
[ 9.233919] invoke_syscall+0x4c/0xe8
[ 9.233925] el0_svc_common+0x8c/0xf0
[ 9.233929] do_el0_svc+0x28/0x40
[ 9.233934] el0_svc+0x38/0x100
[ 9.233938] el0t_64_sync_handler+0x84/0x130
[ 9.233943] el0t_64_sync+0x17c/0x180
Mark the controller as sleeping.
Fixes: 6e261d1090d6 ("pinctrl: qcom: Add sm8250 lpass lpi pinctrl driver")
Cc: stable@vger.kernel.org
Reported-by: Val Packett <val@packett.cool>
Closes: https://lore.kernel.org/all/98c0f185-b0e0-49ea-896c-f3972dd011ca@packett.cool/
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 4b5bdabb5449b652122e43f507f73789041d4abe ]
The max buffer size of ENETC RX BD is 0xFFFF bytes, so if the PAGE_SIZE
is greater than 128K, ENETC_RXB_DMA_SIZE and ENETC_RXB_DMA_SIZE_XDP will
be greater than 0xFFFF, thus causing a build warning.
This will not cause any practical issues because ENETC is currently only
used on the ARM64 platform, and the max PAGE_SIZE is 64K. So this patch
is only for fixing the build warning that occurs when compiling ENETC
drivers for other platforms.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202601050637.kHEKKOG7-lkp@intel.com/
Fixes: e59bc32df2e9 ("net: enetc: correct the value of ENETC_RXB_TRUESIZE")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260107091204.1980222-1-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit afa27621a28af317523e0836dad430bec551eb54 ]
When asynchronously writing to the device registers and if usb_submit_urb()
fail, the code fail to release allocated to this point resources.
Fixes: 323b34963d11 ("drivers: net: usb: pegasus: fix control urb submission")
Signed-off-by: Petko Manolov <petkan@nucleusys.com>
Link: https://patch.msgid.link/20260106084821.3746677-1-petko.manolov@konsulko.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c7fabe4ad9219866c203164a214c474c95b36bf2 ]
For years I wondered why the Apple Cinema Display driver would not
just work for me. Turns out the hidraw driver instantly takes it
over. Fix by adding appledisplay VID/PIDs to hid_have_special_driver.
Fixes: 069e8a65cd79 ("Driver for Apple Cinema Display")
Signed-off-by: René Rebe <rene@exactco.de>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ffeafa65b2b26df2f5b5a6118d3174f17bd12ec5 ]
Fix the max number of bits passed to find_first_zero_bit() in
bnxt_alloc_agg_idx(). We were incorrectly passing the number of
long words. find_first_zero_bit() may fail to find a zero bit and
cause a wrong ID to be used. If the wrong ID is already in use, this
can cause data corruption. Sometimes an error like this can also be
seen:
bnxt_en 0000:83:00.0 enp131s0np0: TPA end agg_buf 2 != expected agg_bufs 1
Fix it by passing the correct number of bits MAX_TPA_P5. Use
DECLARE_BITMAP() to more cleanly define the bitmap. Add a sanity
check to warn if a bit cannot be found and reset the ring [MChan].
Fixes: ec4d8e7cf024 ("bnxt_en: Add TPA ID mapping logic for 57500 chips.")
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Srijit Bose <srijit.bose@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20251231083625.3911652-1-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit fea2993aecd74d5d11ede1ebbd60e478ebfed996 ]
Move the reset helpers, subsequent patches will need some
of them on the Tx path.
While at it rename bnxt_sched_reset(), on more recent chips
it schedules a queue reset, instead of a fuller reset.
Link: https://lore.kernel.org/r/20230720010440.1967136-2-kuba@kernel.org
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: ffeafa65b2b2 ("bnxt_en: Fix potential data corruption with HW GRO/LRO")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 92e6e0a87f6860a4710f9494f8c704d498ae60f8 ]
Commit 1f52d7b62285 ("net: wwan: iosm: Enable M.2 7360 WWAN card support")
allocated memory for pp_qlt in ipc_mux_init() but did not free it in
ipc_mux_deinit(). This results in a memory leak when the driver is
unloaded.
Free the allocated memory in ipc_mux_deinit() to fix the leak.
Fixes: 1f52d7b62285 ("net: wwan: iosm: Enable M.2 7360 WWAN card support")
Co-developed-by: Jianhao Xu <jianhao.xu@seu.edu.cn>
Signed-off-by: Jianhao Xu <jianhao.xu@seu.edu.cn>
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Reviewed-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Link: https://patch.msgid.link/20251230071853.1062223-1-zilin@seu.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 144297e2a24e3e54aee1180ec21120ea38822b97 ]
Dumping module EEPROM on newer modules is supported through the netlink
interface only.
Querying with old userspace ethtool (or other tools, such as 'lshw')
which still uses the ioctl interface results in an error message that
could flood dmesg (in addition to the expected error return value).
The original message was added under the assumption that the driver
should be able to handle all module types, but now that such flows are
easily triggered from userspace, it doesn't serve its purpose.
Change the log level of the print in mlx5_query_module_eeprom() to
debug.
Fixes: bb64143eee8c ("net/mlx5e: Add ethtool support for dump module EEPROM")
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20251225132717.358820-5-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 34f3ff52cb9fa7dbf04f5c734fcc4cb6ed5d1a95 ]
Commit 15faa1f67ab4 ("lan966x: Fix crash when adding interface under a lag")
fixed a similar issue in the lan966x driver caused by a NULL pointer dereference.
The ocelot_set_aggr_pgids() function in the ocelot driver has similar logic
and is susceptible to the same crash.
This issue specifically affects the ocelot_vsc7514.c frontend, which leaves
unused ports as NULL pointers. The felix_vsc9959.c frontend is unaffected as
it uses the DSA framework which registers all ports.
Fix this by checking if the port pointer is valid before accessing it.
Fixes: 528d3f190c98 ("net: mscc: ocelot: drop the use of the "lags" array")
Signed-off-by: Jerry Wu <w.7erry@foxmail.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/tencent_75EF812B305E26B0869C673DD1160866C90A@qq.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a428e0da1248c353557970848994f35fd3f005e2 ]
devlink_alloc() may return NULL on allocation failure, but
prestera_devlink_alloc() unconditionally calls devlink_priv() on
the returned pointer.
This leads to a NULL pointer dereference if devlink allocation fails.
Add a check for a NULL devlink pointer and return NULL early to avoid
the crash.
Fixes: 34dd1710f5a3 ("net: marvell: prestera: Add basic devlink support")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Acked-by: Elad Nachman <enachman@marvell.com>
Link: https://patch.msgid.link/20251230052124.897012-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
scanned in again after probe failed"
[ Upstream commit 278712d20bc8ec29d1ad6ef9bdae9000ef2c220c ]
This reverts commit ab2068a6fb84751836a84c26ca72b3beb349619d.
When probing the exp-attached sata device, libsas/libata will issue a
hard reset in sas_probe_sata() -> ata_sas_async_probe(), then a
broadcast event will be received after the disk probe fails, and this
commit causes the probe will be re-executed on the disk, and a faulty
disk may get into an indefinite loop of probe.
Therefore, revert this commit, although it can fix some temporary issues
with disk probe failure.
Signed-off-by: Xingui Yang <yangxingui@huawei.com>
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Link: https://patch.msgid.link/20251202065627.140361-1-yangxingui@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b4bb6daf4ac4d4560044ecdd81e93aa2f6acbb06 ]
When a W-LUN resume fails, its parent devices in the SCSI hierarchy,
including the scsi_target, may be runtime suspended. Subsequently, the
error handler in ufshcd_recover_pm_error() fails to set the W-LUN device
back to active because the parent target is not active. This results in
the following errors:
google-ufshcd 3c2d0000.ufs: ufshcd_err_handler started; HBA state eh_fatal; ...
ufs_device_wlun 0:0:0:49488: START_STOP failed for power mode: 1, result 40000
ufs_device_wlun 0:0:0:49488: ufshcd_wl_runtime_resume failed: -5
...
ufs_device_wlun 0:0:0:49488: runtime PM trying to activate child device 0:0:0:49488 but parent (target0:0:0) is not active
Address this by:
1. Ensuring the W-LUN's parent scsi_target is runtime resumed before
attempting to set the W-LUN to active within
ufshcd_recover_pm_error().
2. Explicitly checking for power.runtime_error on the HBA and W-LUN
devices before calling pm_runtime_set_active() to clear the error
state.
3. Adding pm_runtime_get_sync(hba->dev) in
ufshcd_err_handling_prepare() to ensure the HBA itself is active
during error recovery, even if a child device resume failed.
These changes ensure the device power states are managed correctly
during error recovery.
Signed-off-by: Brian Kao <powenkao@google.com>
Tested-by: Brian Kao <powenkao@google.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251112063214.1195761-1-powenkao@google.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6ac3484fb13b2fc7f31cfc7f56093e7d0ce646a5 ]
A dynamic remove/add storage adapter test hits EEH on PowerPC:
EEH: [c00000000004f75c] __eeh_send_failure_event+0x7c/0x160
EEH: [c000000000048444] eeh_dev_check_failure.part.0+0x254/0x650
EEH: [c008000001650678] eeh_readl+0x60/0x90 [ipr]
EEH: [c00800000166746c] ipr_cancel_op+0x2b8/0x524 [ipr]
EEH: [c008000001656524] ipr_eh_abort+0x6c/0x130 [ipr]
EEH: [c000000000ab0d20] scmd_eh_abort_handler+0x140/0x440
EEH: [c00000000017e558] process_one_work+0x298/0x590
EEH: [c00000000017eef8] worker_thread+0xa8/0x620
EEH: [c00000000018be34] kthread+0x124/0x130
EEH: [c00000000000cd64] ret_from_kernel_thread+0x5c/0x64
A PCIe bus trace reveals that a vector of MSI-X is cleared to 0 by
irqbalance daemon. If we disable irqbalance daemon, we won't see the
issue.
With debug enabled in ipr driver:
[ 44.103071] ipr: Entering __ipr_remove
[ 44.103083] ipr: Entering ipr_initiate_ioa_bringdown
[ 44.103091] ipr: Entering ipr_reset_shutdown_ioa
[ 44.103099] ipr: Leaving ipr_reset_shutdown_ioa
[ 44.103105] ipr: Leaving ipr_initiate_ioa_bringdown
[ 44.149918] ipr: Entering ipr_reset_ucode_download
[ 44.149935] ipr: Entering ipr_reset_alert
[ 44.150032] ipr: Entering ipr_reset_start_timer
[ 44.150038] ipr: Leaving ipr_reset_alert
[ 44.244343] scsi 1:2:3:0: alua: Detached
[ 44.254300] ipr: Entering ipr_reset_start_bist
[ 44.254320] ipr: Entering ipr_reset_start_timer
[ 44.254325] ipr: Leaving ipr_reset_start_bist
[ 44.364329] scsi 1:2:4:0: alua: Detached
[ 45.134341] scsi 1:2:5:0: alua: Detached
[ 45.860949] ipr: Entering ipr_reset_shutdown_ioa
[ 45.860962] ipr: Leaving ipr_reset_shutdown_ioa
[ 45.860966] ipr: Entering ipr_reset_alert
[ 45.861028] ipr: Entering ipr_reset_start_timer
[ 45.861035] ipr: Leaving ipr_reset_alert
[ 45.964302] ipr: Entering ipr_reset_start_bist
[ 45.964309] ipr: Entering ipr_reset_start_timer
[ 45.964313] ipr: Leaving ipr_reset_start_bist
[ 46.264301] ipr: Entering ipr_reset_bist_done
[ 46.264309] ipr: Leaving ipr_reset_bist_done
During adapter reset, ipr device driver blocks config space access but
can't block MMIO access for MSI-X entries. There is very small window:
irqbalance daemon kicks in during adapter reset before ipr driver calls
pci_restore_state(pdev) to restore MSI-X table.
irqbalance daemon reads back all 0 for that MSI-X vector in
__pci_read_msi_msg().
irqbalance daemon:
msi_domain_set_affinity()
->irq_chip_set_affinity_patent()
->xive_irq_set_affinity()
->irq_chip_compose_msi_msg()
->pseries_msi_compose_msg()
->__pci_read_msi_msg(): read all 0 since didn't call pci_restore_state
->irq_chip_write_msi_msg()
-> pci_write_msg_msi(): write 0 to the msix vector entry
When ipr driver calls pci_restore_state(pdev) in
ipr_reset_restore_cfg_space(), the MSI-X vector entry has been cleared
by irqbalance daemon in pci_write_msg_msix().
pci_restore_state()
->__pci_restore_msix_state()
Below is the MSI-X table for ipr adapter after irqbalance daemon kicked
in during adapter reset:
Dump MSIx table: index=0 address_lo=c800 address_hi=10000000 msg_data=0
Dump MSIx table: index=1 address_lo=c810 address_hi=10000000 msg_data=0
Dump MSIx table: index=2 address_lo=c820 address_hi=10000000 msg_data=0
Dump MSIx table: index=3 address_lo=c830 address_hi=10000000 msg_data=0
Dump MSIx table: index=4 address_lo=c840 address_hi=10000000 msg_data=0
Dump MSIx table: index=5 address_lo=c850 address_hi=10000000 msg_data=0
Dump MSIx table: index=6 address_lo=c860 address_hi=10000000 msg_data=0
Dump MSIx table: index=7 address_lo=c870 address_hi=10000000 msg_data=0
Dump MSIx table: index=8 address_lo=0 address_hi=0 msg_data=0
---------> Hit EEH since msix vector of index=8 are 0
Dump MSIx table: index=9 address_lo=c890 address_hi=10000000 msg_data=0
Dump MSIx table: index=10 address_lo=c8a0 address_hi=10000000 msg_data=0
Dump MSIx table: index=11 address_lo=c8b0 address_hi=10000000 msg_data=0
Dump MSIx table: index=12 address_lo=c8c0 address_hi=10000000 msg_data=0
Dump MSIx table: index=13 address_lo=c8d0 address_hi=10000000 msg_data=0
Dump MSIx table: index=14 address_lo=c8e0 address_hi=10000000 msg_data=0
Dump MSIx table: index=15 address_lo=c8f0 address_hi=10000000 msg_data=0
[ 46.264312] ipr: Entering ipr_reset_restore_cfg_space
[ 46.267439] ipr: Entering ipr_fail_all_ops
[ 46.267447] ipr: Leaving ipr_fail_all_ops
[ 46.267451] ipr: Leaving ipr_reset_restore_cfg_space
[ 46.267454] ipr: Entering ipr_ioa_bringdown_done
[ 46.267458] ipr: Leaving ipr_ioa_bringdown_done
[ 46.267467] ipr: Entering ipr_worker_thread
[ 46.267470] ipr: Leaving ipr_worker_thread
IRQ balancing is not required during adapter reset.
Enable "IRQ_NO_BALANCING" flag before starting adapter reset and disable
it after calling pci_restore_state(). The irqbalance daemon is disabled
for this short period of time (~2s).
Co-developed-by: Kyle Mahlkuch <Kyle.Mahlkuch@ibm.com>
Signed-off-by: Kyle Mahlkuch <Kyle.Mahlkuch@ibm.com>
Signed-off-by: Wen Xiong <wenxiong@linux.ibm.com>
Link: https://patch.msgid.link/20251028142427.3969819-2-wenxiong@linux.ibm.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 20cf2aed89ac6d78a0122e31c875228e15247194 upstream.
The GPIO controller is configured as non-sleeping but it uses generic
pinctrl helpers which use a mutex for synchronization.
This can cause the following lockdep splat with shared GPIOs enabled on
boards which have multiple devices using the same GPIO:
BUG: sleeping function called from invalid context at
kernel/locking/mutex.c:591
in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 12, name:
kworker/u16:0
preempt_count: 1, expected: 0
RCU nest depth: 0, expected: 0
6 locks held by kworker/u16:0/12:
#0: ffff0001f0018d48 ((wq_completion)events_unbound#2){+.+.}-{0:0},
at: process_one_work+0x18c/0x604
#1: ffff8000842dbdf0 (deferred_probe_work){+.+.}-{0:0}, at:
process_one_work+0x1b4/0x604
#2: ffff0001f18498f8 (&dev->mutex){....}-{4:4}, at:
__device_attach+0x38/0x1b0
#3: ffff0001f75f1e90 (&gdev->srcu){.+.?}-{0:0}, at:
gpiod_direction_output_raw_commit+0x0/0x360
#4: ffff0001f46e3db8 (&shared_desc->spinlock){....}-{3:3}, at:
gpio_shared_proxy_direction_output+0xd0/0x144 [gpio_shared_proxy]
#5: ffff0001f180ee90 (&gdev->srcu){.+.?}-{0:0}, at:
gpiod_direction_output_raw_commit+0x0/0x360
irq event stamp: 81450
hardirqs last enabled at (81449): [<ffff8000813acba4>]
_raw_spin_unlock_irqrestore+0x74/0x78
hardirqs last disabled at (81450): [<ffff8000813abfb8>]
_raw_spin_lock_irqsave+0x84/0x88
softirqs last enabled at (79616): [<ffff8000811455fc>]
__alloc_skb+0x17c/0x1e8
softirqs last disabled at (79614): [<ffff8000811455fc>]
__alloc_skb+0x17c/0x1e8
CPU: 2 UID: 0 PID: 12 Comm: kworker/u16:0 Not tainted
6.19.0-rc4-next-20260105+ #11975 PREEMPT
Hardware name: Hardkernel ODROID-M1 (DT)
Workqueue: events_unbound deferred_probe_work_func
Call trace:
show_stack+0x18/0x24 (C)
dump_stack_lvl+0x90/0xd0
dump_stack+0x18/0x24
__might_resched+0x144/0x248
__might_sleep+0x48/0x98
__mutex_lock+0x5c/0x894
mutex_lock_nested+0x24/0x30
pinctrl_get_device_gpio_range+0x44/0x128
pinctrl_gpio_direction+0x3c/0xe0
pinctrl_gpio_direction_output+0x14/0x20
rockchip_gpio_direction_output+0xb8/0x19c
gpiochip_direction_output+0x38/0x94
gpiod_direction_output_raw_commit+0x1d8/0x360
gpiod_direction_output_nonotify+0x7c/0x230
gpiod_direction_output+0x34/0xf8
gpio_shared_proxy_direction_output+0xec/0x144 [gpio_shared_proxy]
gpiochip_direction_output+0x38/0x94
gpiod_direction_output_raw_commit+0x1d8/0x360
gpiod_direction_output_nonotify+0x7c/0x230
gpiod_configure_flags+0xbc/0x480
gpiod_find_and_request+0x1a0/0x574
gpiod_get_index+0x58/0x84
devm_gpiod_get_index+0x20/0xb4
devm_gpiod_get_optional+0x18/0x30
rockchip_pcie_probe+0x98/0x380
platform_probe+0x5c/0xac
really_probe+0xbc/0x298
Fixes: 936ee2675eee ("gpio/rockchip: add driver for rockchip gpio")
Cc: stable@vger.kernel.org
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Closes: https://lore.kernel.org/all/d035fc29-3b03-4cd6-b8ec-001f93540bc6@samsung.com/
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20260106090011.21603-1-bartosz.golaszewski@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0ddd3bb4b14c9102c0267b3fd916c81fe5ab89c1 upstream.
Jump to the existing dev_put label when devm_request_irq() fails
so drm_dev_put() and of_reserved_mem_device_release() run
instead of returning early and leaking resources.
Found via static analysis and code review.
Fixes: bed41005e617 ("drm/pl111: Initial drm/kms driver for pl111")
Cc: stable@vger.kernel.org
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20251211123345.2392065-1-linmq006@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 23f9485510c338476b9735d516c1d4aacb810d46 upstream.
An IRQ handler can either be IRQF_NO_THREAD or acquire spinlock_t, as
CONFIG_PROVE_RAW_LOCK_NESTING warns:
=============================
[ BUG: Invalid wait context ]
6.18.0-rc1+git... #1
-----------------------------
some-user-space-process/1251 is trying to lock:
(&counter->events_list_lock){....}-{3:3}, at: counter_push_event [counter]
other info that might help us debug this:
context-{2:2}
no locks held by some-user-space-process/....
stack backtrace:
CPU: 0 UID: 0 PID: 1251 Comm: some-user-space-process 6.18.0-rc1+git... #1 PREEMPT
Call trace:
show_stack (C)
dump_stack_lvl
dump_stack
__lock_acquire
lock_acquire
_raw_spin_lock_irqsave
counter_push_event [counter]
interrupt_cnt_isr [interrupt_cnt]
__handle_irq_event_percpu
handle_irq_event
handle_simple_irq
handle_irq_desc
generic_handle_domain_irq
gpio_irq_handler
handle_irq_desc
generic_handle_domain_irq
gic_handle_irq
call_on_irq_stack
do_interrupt_handler
el0_interrupt
__el0_irq_handler_common
el0t_64_irq_handler
el0t_64_irq
... and Sebastian correctly points out. Remove IRQF_NO_THREAD as an
alternative to switching to raw_spinlock_t, because the latter would limit
all potential nested locks to raw_spinlock_t only.
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20251117151314.xwLAZrWY@linutronix.de/
Fixes: a55ebd47f21f ("counter: add IRQ or GPIO based counter")
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20251118083603.778626-1-alexander.sverdlin@siemens.com
Signed-off-by: William Breathitt Gray <wbg@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 420f423defcf6d0af2263d38da870ca4a20c0990 upstream.
Add Nova Lake S device id.
Cc: stable <stable@kernel.org>
Co-developed-by: Tomas Winkler <tomasw@gmail.com>
Signed-off-by: Tomas Winkler <tomasw@gmail.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Link: https://patch.msgid.link/20251215105915.1672659-1-alexander.usyskin@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a4e305ed60f7c41bbf9aabc16dd75267194e0de3 upstream.
pdev can be null and free_ring: can be called in 1297 with a null
pdev.
Fixes: 55c82617c3e8 ("3c59x: convert to generic DMA API")
Cc: <stable@vger.kernel.org>
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Link: https://patch.msgid.link/20260106094731.25819-2-fourier.thomas@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4d984b0574ff708e66152763fbfdef24ea40933f upstream.
The size of the buffer is not the same when alloc'd with
dma_alloc_coherent() in he_init_tpdrq() and freed.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: <stable@vger.kernel.org>
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Link: https://patch.msgid.link/20260107090141.80900-2-fourier.thomas@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 61921bdaa132b580b6db6858e6d7dcdb870df5fe upstream.
Fix per-queue statistics for devices with more than one queue.
The output data pointer is currently reset in each loop iteration,
effectively summing all queue statistics in the first four u64 values.
The summary values are not even labeled correctly. For example, if eth0 has
2 queues, ethtool -S eth0 shows:
q0_tx_pkt_n: 374 (actually tx_pkt_n over all queues)
q0_tx_irq_n: 23 (actually tx_normal_irq_n over all queues)
q1_tx_pkt_n: 462 (actually rx_pkt_n over all queues)
q1_tx_irq_n: 446 (actually rx_normal_irq_n over all queues)
q0_rx_pkt_n: 0
q0_rx_irq_n: 0
q1_rx_pkt_n: 0
q1_rx_irq_n: 0
Fixes: 133466c3bbe1 ("net: stmmac: use per-queue 64 bit statistics where necessary")
Cc: stable@vger.kernel.org
Signed-off-by: Petr Tesarik <petr@tesarici.cz>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8070274b472e2e9f5f67a990f5e697634c415708 upstream.
commit 133466c3bbe1 ("net: stmmac: use per-queue 64 bit statistics
where necessary") caused one regression as found by Uwe, the backtrace
looks like:
INFO: trying to register non-static key.
The code is fine but needs lockdep annotation, or maybe
you didn't initialize this object before use?
turning off the locking correctness validator.
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.5.0-rc1-00449-g133466c3bbe1-dirty #21
Hardware name: STM32 (Device Tree Support)
unwind_backtrace from show_stack+0x18/0x1c
show_stack from dump_stack_lvl+0x60/0x90
dump_stack_lvl from register_lock_class+0x98c/0x99c
register_lock_class from __lock_acquire+0x74/0x293c
__lock_acquire from lock_acquire+0x134/0x398
lock_acquire from stmmac_get_stats64+0x2ac/0x2fc
stmmac_get_stats64 from dev_get_stats+0x44/0x130
dev_get_stats from rtnl_fill_stats+0x38/0x120
rtnl_fill_stats from rtnl_fill_ifinfo+0x834/0x17f4
rtnl_fill_ifinfo from rtmsg_ifinfo_build_skb+0xc0/0x144
rtmsg_ifinfo_build_skb from rtmsg_ifinfo+0x50/0x88
rtmsg_ifinfo from __dev_notify_flags+0xc0/0xec
__dev_notify_flags from dev_change_flags+0x50/0x5c
dev_change_flags from ip_auto_config+0x2f4/0x1260
ip_auto_config from do_one_initcall+0x70/0x35c
do_one_initcall from kernel_init_freeable+0x2ac/0x308
kernel_init_freeable from kernel_init+0x1c/0x138
kernel_init from ret_from_fork+0x14/0x2c
The reason is the rxq|txq_stats structures are not what expected
because stmmac_open() -> __stmmac_open() the structure is overwritten
by "memcpy(&priv->dma_conf, dma_conf, sizeof(*dma_conf));"
This causes the well initialized syncp member of rxq|txq_stats is
overwritten unexpectedly as pointed out by Johannes and Uwe.
Fix this issue by moving rxq|txq_stats back to stmmac_extra_stats. For
SMP cache friendly, we also mark stmmac_txq_stats and stmmac_rxq_stats
as ____cacheline_aligned_in_smp.
Fixes: 133466c3bbe1 ("net: stmmac: use per-queue 64 bit statistics where necessary")
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230917165328.3403-1-jszhang@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 782be79e4551550d7a82b1957fc0f7347e6d461f upstream.
A recent change fixing a device reference leak introduced a clock
imbalance by reusing an error path so that the clock may be disabled
before having been enabled.
Note that the clock framework allows for passing in NULL clocks so there
is no risk for a NULL pointer dereference.
Also drop the bogus I2C client NULL check added by the offending commit
as the pointer has already been verified to be non-NULL.
Fixes: c84117912bdd ("USB: lpc32xx_udc: Fix error handling in probe")
Cc: stable@vger.kernel.org
Cc: Ma Ke <make24@iscas.ac.cn>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Link: https://patch.msgid.link/20251218153519.19453-2-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit f33890f95140660923003ba1e2f114dee20e691b which is
commit 9be15fbfc6c5c89c22cf6e209f66ea43ee0e58bb upstream.
This causes problems in older kernel trees as SNP host kdump is not
supported in them, so drop it from the stable branches.
Reported-by: Ashish Kalra <ashish.kalra@amd.com>
Link: https://lore.kernel.org/r/dacdff7f-0606-4ed5-b056-2de564404d51@amd.com
Cc: Vasant Hegde <vasant.hegde@amd.com>
Cc: Sairaj Kodilkar <sarunkod@amd.com>
Cc: Joerg Roedel <joerg.roedel@amd.com>
Cc: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In scmi_devm_notifier_unregister(), the notifier-block argument was ignored
and never passed to devres_release(). As a result, the function always
returned -ENOENT and failed to unregister the notifier.
Drivers that depend on this helper for teardown could therefore hit
unexpected failures, including kernel panics.
Commit 264a2c520628 ("firmware: arm_scmi: Simplify scmi_devm_notifier_unregister")
removed the faulty code path during refactoring and hence this fix is not
required upstream.
Cc: <stable@vger.kernel.org> # 5.15.x, 6.1.x, and 6.6.x
Fixes: 5ad3d1cf7d34 ("firmware: arm_scmi: Introduce new devres notification ops")
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Amitai Gottlieb <amitaig@hailo.ai>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6241b49540a65a6d5274fa938fd3eb4cbfe2e076 upstream.
The commit below added a new helper, but omitted to move (and add) the
corressponding kernel-doc. Do it now.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Fixes: 2b5eac0f8c6e ("tty: introduce and use tty_port_tty_vhangup() helper")
Link: https://lore.kernel.org/all/b23d566c-09dc-7374-cc87-0ad4660e8b2e@linux.intel.com/
Reported-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Link: https://lore.kernel.org/r/20250624080641.509959-6-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Commit 7346e7a058a2 ("pwm: stm32: Always do lazy disabling") triggered a
regression where PWM polarity changes could be ignored.
stm32_pwm_set_polarity() was skipped due to a mismatch between the
cached pwm->state.polarity and the actual hardware state, leaving the
hardware polarity unchanged.
Fixes: 7edf7369205b ("pwm: Add driver for STM32 plaftorm")
Cc: stable@vger.kernel.org # <= 6.12
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Co-developed-by: Uwe Kleine-König <ukleinek@kernel.org>
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
|
|
commit bb0ba4cb1065e87f9cc75db1fa454e56d0894d01 upstream.
Two clearly different specimens of NEC uPD720200 (one with start/stop
bug, one without) were seen to cause IOMMU faults after some Missed
Service Errors. Faulting address is immediately after a transfer ring
segment and patched dynamic debug messages revealed that the MSE was
received when waiting for a TD near the end of that segment:
[ 1.041954] xhci_hcd: Miss service interval error for slot 1 ep 2 expected TD DMA ffa08fe0
[ 1.042120] xhci_hcd: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0005 address=0xffa09000 flags=0x0000]
[ 1.042146] xhci_hcd: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0005 address=0xffa09040 flags=0x0000]
It gets even funnier if the next page is a ring segment accessible to
the HC. Below, it reports MSE in segment at ff1e8000, plows through a
zero-filled page at ff1e9000 and starts reporting events for TRBs in
page at ff1ea000 every microframe, instead of jumping to seg ff1e6000.
[ 7.041671] xhci_hcd: Miss service interval error for slot 1 ep 2 expected TD DMA ff1e8fe0
[ 7.041999] xhci_hcd: Miss service interval error for slot 1 ep 2 expected TD DMA ff1e8fe0
[ 7.042011] xhci_hcd: WARN: buffer overrun event for slot 1 ep 2 on endpoint
[ 7.042028] xhci_hcd: All TDs skipped for slot 1 ep 2. Clear skip flag.
[ 7.042134] xhci_hcd: WARN: buffer overrun event for slot 1 ep 2 on endpoint
[ 7.042138] xhci_hcd: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 2 comp_code 31
[ 7.042144] xhci_hcd: Looking for event-dma 00000000ff1ea040 trb-start 00000000ff1e6820 trb-end 00000000ff1e6820
[ 7.042259] xhci_hcd: WARN: buffer overrun event for slot 1 ep 2 on endpoint
[ 7.042262] xhci_hcd: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 2 comp_code 31
[ 7.042266] xhci_hcd: Looking for event-dma 00000000ff1ea050 trb-start 00000000ff1e6820 trb-end 00000000ff1e6820
At some point completion events change from Isoch Buffer Overrun to
Short Packet and the HC finally finds cycle bit mismatch in ff1ec000.
[ 7.098130] xhci_hcd: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 2 comp_code 13
[ 7.098132] xhci_hcd: Looking for event-dma 00000000ff1ecc50 trb-start 00000000ff1e6820 trb-end 00000000ff1e6820
[ 7.098254] xhci_hcd: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 2 comp_code 13
[ 7.098256] xhci_hcd: Looking for event-dma 00000000ff1ecc60 trb-start 00000000ff1e6820 trb-end 00000000ff1e6820
[ 7.098379] xhci_hcd: Overrun event on slot 1 ep 2
It's possible that data from the isochronous device were written to
random buffers of pending TDs on other endpoints (either IN or OUT),
other devices or even other HCs in the same IOMMU domain.
Lastly, an error from a different USB device on another HC. Was it
caused by the above? I don't know, but it may have been. The disk
was working without any other issues and generated PCIe traffic to
starve the NEC of upstream BW and trigger those MSEs. The two HCs
shared one x1 slot by means of a commercial "PCIe splitter" board.
[ 7.162604] usb 10-2: reset SuperSpeed USB device number 3 using xhci_hcd
[ 7.178990] sd 9:0:0:0: [sdb] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x07 driverbyte=DRIVER_OK cmd_age=0s
[ 7.179001] sd 9:0:0:0: [sdb] tag#0 CDB: opcode=0x28 28 00 04 02 ae 00 00 02 00 00
[ 7.179004] I/O error, dev sdb, sector 67284480 op 0x0:(READ) flags 0x80700 phys_seg 5 prio class 0
Fortunately, it appears that this ridiculous bug is avoided by setting
the chain bit of Link TRBs on isochronous rings. Other ancient HCs are
known which also expect the bit to be set and they ignore Link TRBs if
it's not. Reportedly, 0.95 spec guaranteed that the bit is set.
The bandwidth-starved NEC HC running a 32KB/uframe UVC endpoint reports
tens of MSEs per second and runs into the bug within seconds. Chaining
Link TRBs allows the same workload to run for many minutes, many times.
No negative side effects seen in UVC recording and UAC playback with a
few devices at full speed, high speed and SuperSpeed.
The problem doesn't reproduce on the newer Renesas uPD720201/uPD720202
and on old Etron EJ168 and VIA VL805 (but the VL805 has other bug).
[shorten line length of log snippets in commit messge -Mathias]
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250306144954.3507700-14-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[Shivani: Modified to apply on v5.10.y-v6.1.y]
Signed-off-by: Shivani Agarwal <shivani.agarwal@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7476a2215c07703db5e95efaa3fc5b9f957b9417 upstream.
Older 0.95 xHCI hosts and some other specific newer hosts require the
chain bit to be set for Link TRBs even if the link TRB is not in the
middle of a transfer descriptor (TD).
move the checks for all those cases into one xhci_link_chain_quirk()
function to clean up and avoid code duplication.
No functional changes.
[skip renaming chain_links flag, reword commit message -Mathias]
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20240626124835.1023046-10-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[Shivani: Modified to apply on v5.10.y-v6.1.y]
Signed-off-by: Shivani Agarwal <shivani.agarwal@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 5ac2c0279053a2c5265d46903432fb26ae2d0da2 ]
Check that the resource which is converted to a surface exists before
trying to use the cursor snooper on it.
vmw_cmd_res_check allows explicit invalid (SVGA3D_INVALID_ID) identifiers
because some svga commands accept SVGA3D_INVALID_ID to mean "no surface",
unfortunately functions that accept the actual surfaces as objects might
(and in case of the cursor snooper, do not) be able to handle null
objects. Make sure that we validate not only the identifier (via the
vmw_cmd_res_check) but also check that the actual resource exists before
trying to do something with it.
Fixes unchecked null-ptr reference in the snooping code.
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Fixes: c0951b797e7d ("drm/vmwgfx: Refactor resource management")
Reported-by: Kuzey Arda Bulut <kuzeyardabulut@gmail.com>
Cc: Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Ian Forbes <ian.forbes@broadcom.com>
Link: https://lore.kernel.org/r/20250917153655.1968583-1-zack.rusin@broadcom.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[Shivani: Modified to apply on v5.10.y-v6.1.y]
Signed-off-by: Shivani Agarwal <shivani.agarwal@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit f41c538881eec4dcf5961a242097d447f848cda6 ]
The call to idxd_free() introduces a duplicate put_device() leading to a
reference count underflow:
refcount_t: underflow; use-after-free.
WARNING: CPU: 15 PID: 4428 at lib/refcount.c:28 refcount_warn_saturate+0xbe/0x110
...
Call Trace:
<TASK>
idxd_remove+0xe4/0x120 [idxd]
pci_device_remove+0x3f/0xb0
device_release_driver_internal+0x197/0x200
driver_detach+0x48/0x90
bus_remove_driver+0x74/0xf0
pci_unregister_driver+0x2e/0xb0
idxd_exit_module+0x34/0x7a0 [idxd]
__do_sys_delete_module.constprop.0+0x183/0x280
do_syscall_64+0x54/0xd70
entry_SYSCALL_64_after_hwframe+0x76/0x7e
The idxd_unregister_devices() which is invoked at the very beginning of
idxd_remove(), already takes care of the necessary put_device() through the
following call path:
idxd_unregister_devices() -> device_unregister() -> put_device()
In addition, when CONFIG_DEBUG_KOBJECT_RELEASE is enabled, put_device() may
trigger asynchronous cleanup via schedule_delayed_work(). If idxd_free() is
called immediately after, it can result in a use-after-free.
Remove the improper idxd_free() to avoid both the refcount underflow and
potential memory corruption during module unload.
Fixes: d5449ff1b04d ("dmaengine: idxd: Add missing idxd cleanup to fix memory leak in remove call")
Signed-off-by: Yi Sun <yi.sun@intel.com>
Tested-by: Shuai Xue <xueshuai@linux.alibaba.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Link: https://lore.kernel.org/r/20250729150313.1934101-2-yi.sun@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
[ Slightly adjust the context. ]
Signed-off-by: Bin Lan <lanbincn@139.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5326ab737a47278dbd16ed3ee7380b26c7056ddd upstream.
According to section 5.3.6.2 (Multiport Device Operation) of the virtio
spec(version 1.2) a control buffer with the event VIRTIO_CONSOLE_RESIZE
is followed by a virtio_console_resize struct containing cols then rows.
The kernel implements this the wrong way around (rows then cols) resulting
in the two values being swapped.
Signed-off-by: Maximilian Immanuel Brandtner <maxbr@linux.ibm.com>
Message-Id: <20250324144300.905535-1-maxbr@linux.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Filip Hejsek <filip.hejsek@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 6a3908ce56e6879920b44ef136252b2f0c954194 ]
Make sure to drop the reference taken to the iommu platform device when
looking up its driver data during of_xlate().
Note that commit e2eae09939a8 ("iommu/qcom: add missing put_device()
call in qcom_iommu_of_xlate()") fixed the leak in a couple of error
paths, but the reference is still leaking on success and late failures.
Fixes: 0ae349a0f33f ("iommu/qcom: Add qcom_iommu")
Cc: stable@vger.kernel.org # 4.14: e2eae09939a8
Cc: Rob Clark <robin.clark@oss.qualcomm.com>
Cc: Yu Kuai <yukuai3@huawei.com>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit ec5601661bfcdc206e6ceba1b97837e763dab1ba ]
This driver was indexing the contexts by asid-1, which is probably
done under the assumption that the first ASID is always 1.
Unfortunately this is not always true: at least for MSM8956 and
MSM8976's GPU IOMMU, the gpu_user context's ASID number is zero.
To allow using a zero asid number, index the contexts by `asid`
instead of by `asid - 1`.
While at it, also enhance human readability by renaming the
`num_ctxs` member of struct qcom_iommu_dev to `max_asid`.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230622092742.74819-5-angelogioacchino.delregno@collabora.com
Signed-off-by: Will Deacon <will@kernel.org>
Stable-dep-of: 6a3908ce56e6 ("iommu/qcom: fix device leak on of_xlate()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit fcf226f1f7083cba76af47bf8dd764b68b149cd2 ]
As specified in this driver, the context banks are 0x1000 apart but
on some SoCs the context number does not necessarily match this
logic, hence we end up using the wrong ASID: keeping in mind that
this IOMMU implementation relies heavily on SCM (TZ) calls, it is
mandatory that we communicate the right context number.
Since this is all about how context banks are mapped in firmware,
which may be board dependent (as a different firmware version may
eventually change the expected context bank numbers), introduce a
new property "qcom,ctx-asid": when found, the ASID will be forced
as read from the devicetree.
When "qcom,ctx-asid" is not found, this driver retains the previous
behavior as to avoid breaking older devicetrees or systems that do
not require forcing ASID numbers.
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
[Marijn: Rebased over next-20221111]
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230622092742.74819-3-angelogioacchino.delregno@collabora.com
Signed-off-by: Will Deacon <will@kernel.org>
Stable-dep-of: 6a3908ce56e6 ("iommu/qcom: fix device leak on of_xlate()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 62565a77c2323d32f2be737455729ac7d3efe6ad ]
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230321084125.337021-5-u.kleine-koenig@pengutronix.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Stable-dep-of: 6a3908ce56e6 ("iommu/qcom: fix device leak on of_xlate()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit a2972cb89935160bfe515b15d28a77694723ac06 ]
The remove and shutdown callback are only called after probe completed
successfully. In this case platform_set_drvdata() was called with a
non-NULL argument and so smmu is never NULL. Other functions in this
driver also don't check for smmu being non-NULL before using it.
Also note that returning an error code from a remove callback doesn't
result in the device staying bound. It's still removed and devm allocated
resources are freed (among others *smmu and the register mapping). So
after an early exit to iommu device stayed around and using it probably
oopses.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20230321084125.337021-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Stable-dep-of: 6a3908ce56e6 ("iommu/qcom: fix device leak on of_xlate()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 74098cc06e753d3ffd8398b040a3a1dfb65260c0 ]
This fixup replaces tty_vhangup() call with call to
tty_port_tty_vhangup(). Both calls hangup tty device
synchronously however tty_port_tty_vhangup() increases
reference count during the hangup operation using
scoped_guard(tty_port_tty).
Cc: stable <stable@kernel.org>
Fixes: 1f73b8b56cf3 ("xhci: dbgtty: fix device unregister")
Signed-off-by: Łukasz Bartosik <ukaszb@chromium.org>
Link: https://patch.msgid.link/20251127111644.3161386-1-ukaszb@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 2b5eac0f8c6e79bc152c8804f9f88d16717013ab ]
This code (tty_get -> vhangup -> tty_put) is repeated on few places.
Introduce a helper similar to tty_port_tty_hangup() (asynchronous) to
handle even vhangup (synchronous).
And use it on those places.
In fact, reuse the tty_port_tty_hangup()'s code and call tty_vhangup()
depending on a new bool parameter.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Cc: Karsten Keil <isdn@linux-pingi.de>
Cc: David Lin <dtwlin@gmail.com>
Cc: Johan Hovold <johan@kernel.org>
Cc: Alex Elder <elder@kernel.org>
Cc: Oliver Neukum <oneukum@suse.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Johan Hedberg <johan.hedberg@gmail.com>
Cc: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20250611100319.186924-2-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 74098cc06e75 ("xhci: dbgtty: fix device unregister: fixup")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit d5b3d02d0b107345f2a6ecb5b06f98356f5c97ab ]
The return value is only ever used as a return value for remove callbacks
of platform drivers. This return value is ignored by the driver core.
(The only effect is an error message, but uart_remove_one_port() already
emitted one in this case.)
So the return value isn't used at all and uart_remove_one_port() can be
changed to return void without any loss. Also this better matches the
Linux device model as remove functions are not supposed to fail.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230512173810.131447-3-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 74098cc06e75 ("xhci: dbgtty: fix device unregister: fixup")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit be729f9de6c64240645dc80a24162ac4d3fe00a8 ]
Remove psb_fbdev_fb_setcolreg(), which hasn't been called in almost
a decade.
Gma500 commit 4d8d096e9ae8 ("gma500: introduce the framebuffer support
code") added the helper psb_fbdev_fb_setcolreg() for setting the fbdev
palette via fbdev's fb_setcolreg callback. Later
commit 3da6c2f3b730 ("drm/gma500: use DRM_FB_HELPER_DEFAULT_OPS for
fb_ops") set several default helpers for fbdev emulation, including
fb_setcmap.
The fbdev subsystem always prefers fb_setcmap over fb_setcolreg. [1]
Hence, the gma500 code is no longer in use and gma500 has been using
drm_fb_helper_setcmap() for several years without issues.
Fixes: 3da6c2f3b730 ("drm/gma500: use DRM_FB_HELPER_DEFAULT_OPS for fb_ops")
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: Stefan Christ <contact@stefanchrist.eu>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v4.10+
Link: https://elixir.bootlin.com/linux/v6.16.9/source/drivers/video/fbdev/core/fbcmap.c#L246 # [1]
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://lore.kernel.org/r/20250929082338.18845-1-tzimmermann@suse.de
[ adapted patch from fbdev.c to framebuffer.c where the function was named psbfb_setcolreg() instead of psb_fbdev_fb_setcolreg() ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 4fa944255be521b1bbd9780383f77206303a3a5c ]
Users of ttm entities need to hold the gtt_window_lock before using them
to guarantee proper ordering of jobs.
Cc: stable@vger.kernel.org
Fixes: cb5cc4f573e1 ("drm/amdgpu: improve debug VRAM access performance using sdma")
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit f7d66fb2ea43a3016e78a700a2ca6c77a74579f9 ]
Init the DRM scheduler base class while allocating the job.
This makes the whole handling much more cleaner.
v2: fix coding style
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221014084641.128280-7-christian.koenig@amd.com
Stable-dep-of: 4fa944255be5 ("drm/amdgpu: add missing lock to amdgpu_ttm_access_memory_sdma")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 73cb5f6eafb0ac7aea8cdeb8ff12981aa741d8fb ]
of_get_child_by_name() returns a node pointer with refcount incremented.
Use the __free() attribute to manage the pgc_node reference, ensuring
automatic of_node_put() cleanup when pgc_node goes out of scope.
This eliminates the need for explicit error handling paths and avoids
reference count leaks.
Fixes: 721cabf6c660 ("soc: imx: move PGC handling to a new GPC driver")
Cc: stable@vger.kernel.org
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 3ba9fdfaa550936837b50b73d6c27ac401fde875 ]
Use preferred device_get_match_data() instead of of_match_device() to
get the driver match data. With this, adjust the includes to explicitly
include the correct headers.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231006224614.444488-1-robh@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Stable-dep-of: 73cb5f6eafb0 ("pmdomain: imx: Fix reference count leak in imx_gpc_probe()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit cdd0f118ef87db8a664fb5ea366fd1766d2df1cd ]
vpu_get_plat_device() increases the reference count of the returned
platform device. However, when devm_kzalloc() fails, the reference
is not released, causing a reference leak.
Fix this by calling put_device() on fw_pdev->dev before returning
on the error path.
Fixes: e25a89f743b1 ("media: mtk-vcodec: potential dereference of null pointer")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
[ adapted file path from common/ subdirectory and adjusted devm_kzalloc target from plat_dev->dev to dev->plat_dev->dev ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 634c2cd17bd021487c57b95973bddb14be8002ff ]
Currently the function vpu_vb_is_codecconfig() always returns 0.
Delete it and its related code.
Fixes: 3cd084519c6f ("media: amphion: add vpu v4l2 m2m support")
Cc: stable@vger.kernel.org
Signed-off-by: Ming Qian <ming.qian@oss.nxp.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 5d1e54bb4dc6741284a3ed587e994308ddee2f16 ]
Some functions defined in vpu_v4l2.c are never used outside of that
compilation unit. Make them static.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Ming Qian <ming.qian@oss.nxp.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Stable-dep-of: 634c2cd17bd0 ("media: amphion: Remove vpu_vb_is_codecconfig")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
