| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Commit 556c1ad666ad90c50ec8fccb930dd5046cfbecfb upstream.
Enable the previously added mitigation for VMscape. Add the cmdline
vmscape={off|ibpb|force} and sysfs reporting.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 350cbb5d2f676bff22c49e5e81764c3b8da342a9 ]
After recent changes in intel_pstate, global.turbo_disabled is only set
at the initialization time and never changed. However, it turns out
that on some systems the "turbo disabled" bit in MSR_IA32_MISC_ENABLE,
the initial state of which is reflected by global.turbo_disabled, can be
flipped later and there should be a way to take that into account (other
than checking that MSR every time the driver runs which is costly and
useless overhead on the vast majority of systems).
For this purpose, notice that before the changes in question,
store_no_turbo() contained a turbo_is_disabled() check that was used
for updating global.turbo_disabled if the "turbo disabled" bit in
MSR_IA32_MISC_ENABLE had been flipped and that functionality can be
restored. Then, users will be able to reset global.turbo_disabled
by writing 0 to no_turbo which used to work before on systems with
flipping "turbo disabled" bit.
This guarantees the driver state to remain in sync, but READ_ONCE()
annotations need to be added in two places where global.turbo_disabled
is accessed locklessly, so modify the driver to make that happen.
Fixes: 0940f1a8011f ("cpufreq: intel_pstate: Do not update global.turbo_disabled after initialization")
Closes: https://lore.kernel.org/linux-pm/bf3ebf1571a4788e97daf861eb493c12d42639a3.camel@xry111.site
Suggested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reported-by: Xi Ruoyao <xry111@xry111.site>
Tested-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9558fae8ce97b3b320b387dd7c88309df2c36d4d ]
Because global.no_turbo is generally not read under intel_pstate_driver_lock
make store_no_turbo() use WRITE_ONCE() for updating it (this is the only
place at which it is updated except for the initialization) and make the
majority of places reading it use READ_ONCE().
Also remove redundant global.turbo_disabled checks from places that
depend on the 'true' value of global.no_turbo because it can only be
'true' if global.turbo_disabled is also 'true'.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Stable-dep-of: 350cbb5d2f67 ("cpufreq: intel_pstate: Check turbo_is_disabled() in store_no_turbo()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c626a438452079824139f97137f17af47b1a8989 ]
Now that global.turbo_disabled can only change at the cpufreq driver
registration time, initialize global.no_turbo at that time too so they
are in sync to start with (if the former is set, the latter cannot be
updated later anyway).
That allows show_no_turbo() to be simlified because it does not need
to check global.turbo_disabled and store_no_turbo() can be rearranged
to avoid doing anything if the new value of global.no_turbo is equal
to the current one and only return an error on attempts to clear
global.no_turbo when global.turbo_disabled.
While at it, eliminate the redundant ret variable from store_no_turbo().
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Stable-dep-of: 350cbb5d2f67 ("cpufreq: intel_pstate: Check turbo_is_disabled() in store_no_turbo()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e979a7c79fbc706f6dac913af379ef4caa04d3d5 ]
A delay unit of 0 is a valid entry, thus it is not valid to check for
unused delays. Instead, check the value field; if that is zero, the
given delay is unset.
Fixes: 4426e6b4ecf6 ("spi: tegra114: Don't fail set_cs_timing when delays are zero")
Cc: stable@vger.kernel.org
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20250506-spi-tegra114-fixup-v1-1-136dc2f732f3@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8eba2187391e5ab49940cd02d6bd45a5617f4daf ]
Fixed a flag reuse bug in the mtk_cqdma_tx_status() function.
Fixes: 157ae5ffd76a ("dmaengine: mediatek: Fix a possible deadlock error in mtk_cqdma_tx_status()")
Cc: stable@vger.kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202505270641.MStzJUfU-lkp@intel.com/
Signed-off-by: Qiu-ji Chen <chenqiuji666@gmail.com>
Reviewed-by: Eugen Hristev <eugen.hristev@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250606090017.5436-1-chenqiuji666@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 467e00b30dfe75c4cfc2197ceef1fddca06adc25 ]
Currently the kzalloc failure check just sets reports the failure
and sets the variable ret to -ENOMEM, which is not checked later
for this specific error. Fix this by just returning -ENOMEM rather
than setting ret.
Fixes: 4fb930715468 ("drm/amd/amdgpu: remove redundant host to psp cmd buf allocations")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 1ee9d1a0962c13ba5ab7e47d33a80e3b8dc4b52e)
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ac3ff8a90637e813005404a0110802aa384af4aa ]
So kernel message has the device pcie bdf information,
which helps issue debugging especially in multiple GPU
system.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: 467e00b30dfe ("drm/amd/amdgpu: Fix missing error return on kzalloc failure")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1cc506f08b4c4688c729e48d7c665910ed330724 ]
Debug messages related to the kernel process of flashing an updated
IFWI are needlessly noisy and also confusing.
Downgrade them to debug instead and clarify what they are actually
doing.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: 467e00b30dfe ("drm/amd/amdgpu: Fix missing error return on kzalloc failure")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5b03127d4745d6848f208463390e6a76d489eb03 ]
On ASICs with PSPv13.0.6, TMR is reserved at boot time. There is no need
to allocate TMR region by driver. However, it's still required to send
SETUP_TMR command to PSP.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: 467e00b30dfe ("drm/amd/amdgpu: Fix missing error return on kzalloc failure")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f14c8c3e1fc9e10c6d54999a96acb2b5087374df ]
Fix the following checkpatch warnings & error in amdgpu_psp.c
WARNING: Comparisons should place the constant on the right side of the test
WARNING: braces {} are not necessary for single statement blocks
WARNING: please, no space before tabs
WARNING: braces {} are not necessary for single statement blocks
ERROR: that open brace { should be on the previous line
Suggested-by: Christian König <christian.koenig@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: 467e00b30dfe ("drm/amd/amdgpu: Fix missing error return on kzalloc failure")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3e931368091f7d5d7902cee9d410eb6db2eea419 ]
The initialized status indicates RAS TA is loaded, but in some cases
(such as RAS fatal error) RAS TA could be destroyed although it's not
unloaded. Hence we load RAS TA unconditionally here.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Candice Li <candice.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: 467e00b30dfe ("drm/amd/amdgpu: Fix missing error return on kzalloc failure")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit bf7d777289d106963fd2080d298e6b88b7263b66 ]
1. Save TA unload psp response status
2. Add RAS TA loading status check for initializaiton
3. Drop RAS context teardown to allow RAS TA to be reloaded
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Candice Li <candice.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: 467e00b30dfe ("drm/amd/amdgpu: Fix missing error return on kzalloc failure")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit bdd5a14e660062114bdebaef9ad52adf04970a89 ]
The bridge has three bootstrap pins which are sampled to determine the
frequency of the external reference clock. The driver will also
(over)write that setting. But it seems this is racy after the bridge is
enabled. It was observed that although the driver write the correct
value (by sniffing on the I2C bus), the register has the wrong value.
The datasheet states that the GPIO lines have to be stable for at least
5us after asserting the EN signal. Thus, there seems to be some logic
which samples the GPIO lines and this logic appears to overwrite the
register value which was set by the driver. Waiting 20us after
asserting the EN line resolves this issue.
Fixes: a095f15c00e2 ("drm/bridge: add support for sn65dsi86 bridge driver")
Signed-off-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250821122341.1257286-1-mwalle@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e811b088a3641861fc9d2b2b840efc61a0f1907d ]
In DMA mode fsl_lpspi_reset() is always called at the end, even when the
transfer is aborted. In PIO mode aborts skip the reset leaving the FIFO
filled and the module enabled.
Fix it by always calling fsl_lpspi_reset().
Fixes: a15dc3d657fa ("spi: lpspi: Fix CLK pin becomes low before one transfer")
Signed-off-by: Larisa Grigore <larisa.grigore@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Link: https://patch.msgid.link/20250828-james-nxp-lpspi-v2-3-6262b9aa9be4@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit cbe33705864ba2697a2939de715b81538cf32430 ]
The driver currently supports multiple chip-selects, but only sets the
polarity for the first one (CS 0). Fix it by setting the PCSPOL bit for
the desired chip-select.
Fixes: 5314987de5e5 ("spi: imx: add lpspi bus driver")
Signed-off-by: Larisa Grigore <larisa.grigore@nxp.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20250828-james-nxp-lpspi-v2-2-6262b9aa9be4@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 782a7c73078e1301c0c427f21c06377d77dfa541 ]
Commit 6a130448498c ("spi: lpspi: Fix wrong transmission when don't use
CONT") breaks transmissions when CONT is used. The TDIE interrupt should
not be disabled in all cases. If CONT is used and the TX transfer is not
yet completed yet, but the interrupt handler is called because there are
characters to be received, TDIE is replaced with FCIE. When the transfer
is finally completed, SR_TDF is set but the interrupt handler isn't
called again.
Fixes: 6a130448498c ("spi: lpspi: Fix wrong transmission when don't use CONT")
Signed-off-by: Larisa Grigore <larisa.grigore@nxp.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20250828-james-nxp-lpspi-v2-1-6262b9aa9be4@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1180c79fbf36e4c02e76ae4658509523437e52a4 ]
The fans controlled by the driver can get stuck at 0 RPM if they are
configured below a 20% duty cycle. The driver tries to avoid this by
enforcing a minimum duty cycle of 20%, but this is done after the fans
are registered with the thermal subsystem. This is too late as the
thermal subsystem can set their current state before the driver is able
to enforce the minimum duty cycle.
Fix by setting the minimum duty cycle before registering the fans with
the thermal subsystem.
Fixes: d7efb2ebc7b3 ("hwmon: (mlxreg-fan) Extend driver to support multiply cooling devices")
Reported-by: Nikolay Aleksandrov <razor@blackwall.org>
Tested-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20250730201715.1111133-1-vadimp@nvidia.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4a81f78caa53e0633cf311ca1526377d9bff7479 ]
In the do_validate_mem(), the call to add_interval() does not
handle errors. If kmalloc() fails in add_interval(), it could
result in a null pointer being inserted into the linked list,
leading to illegal memory access when sub_interval() is called
next.
This patch adds an error handling for the add_interval(). If
add_interval() returns an error, the function will return early
with the error code.
Fixes: 7b4884ca8853 ("pcmcia: validate late-added resources")
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ecef14f70ec9344a10c817248d2ac6cddee5921e ]
Add missing check for platform_get_resource() and return error if it fails
to catch the error.
Fixes: d87d44f7ab35 ("ARM: omap1: move CF chipselect setup to board file")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
This reverts commit 71598a5a7797f0052aaa7bcff0b8d4b8f20f1441 which is
commit 1f02f2044bda1db1fd995bc35961ab075fa7b5a2 upstream.
This commit introduced a regression, however the fix for the regression:
aa5fc4362fac ("drm/amdgpu: fix task hang from failed job submission
during process kill") depends on things not yet present in 6.12.y and
older kernels. Since this commit is more of an optimization, just
revert it for 6.12.y and older stable kernels.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x - 6.12.x
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0beca868cde8742240cd0038141c30482d2b7eb8 upstream.
[WHAT & HOW]
Functions dp_enable_link_phy and dp_disable_link_phy can pass link_res
without initializing hpo_dp_link_enc and it is necessary to check for
null before dereferencing.
This fixes 2 FORWARD_NULL issues reported by Coverity.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[ Minor context change fixed. ]
Signed-off-by: Alva Lan <alvalan9@foxmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit ac4e04d9e378f5aa826c2406ad7871ae1b6a6fb9 ]
When turbo mode is unavailable on a Skylake-X system, executing the
command:
# echo 1 > /sys/devices/system/cpu/intel_pstate/no_turbo
results in an unchecked MSR access error:
WRMSR to 0x199 (attempted to write 0x0000000100001300).
This issue was reproduced on an OEM (Original Equipment Manufacturer)
system and is not a common problem across all Skylake-X systems.
This error occurs because the MSR 0x199 Turbo Engage Bit (bit 32) is set
when turbo mode is disabled. The issue arises when intel_pstate fails to
detect that turbo mode is disabled. Here intel_pstate relies on
MSR_IA32_MISC_ENABLE bit 38 to determine the status of turbo mode.
However, on this system, bit 38 is not set even when turbo mode is
disabled.
According to the Intel Software Developer's Manual (SDM), the BIOS sets
this bit during platform initialization to enable or disable
opportunistic processor performance operations. Logically, this bit
should be set in such cases. However, the SDM also specifies that "OS
and applications must use CPUID leaf 06H to detect processors with
opportunistic processor performance operations enabled."
Therefore, in addition to checking MSR_IA32_MISC_ENABLE bit 38, verify
that CPUID.06H:EAX[1] is 0 to accurately determine if turbo mode is
disabled.
Fixes: 4521e1a0ce17 ("cpufreq: intel_pstate: Reflect current no_turbo state correctly")
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 0940f1a8011fd69be5082015068e0dc31c800c20 ]
The global.turbo_disabled is updated quite often, especially in the
passive mode in which case it is updated every time the scheduler calls
into the driver. However, this is generally not necessary and it adds
MSR read overhead to scheduler code paths (and that particular MSR is
slow to read).
For this reason, make the driver read MSR_IA32_MISC_ENABLE_TURBO_DISABLE
just once at the cpufreq driver registration time and remove all of the
in-flight updates of global.turbo_disabled.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Stable-dep-of: ac4e04d9e378 ("cpufreq: intel_pstate: Unchecked MSR aceess in legacy mode")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 032c5565eb80edb6f2faeb31939540c897987119 ]
Fold intel_pstate_max_within_limits() into its only caller.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Stable-dep-of: ac4e04d9e378 ("cpufreq: intel_pstate: Unchecked MSR aceess in legacy mode")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 37b6ddba967c601479bea418a7ac6ff16b6232b7 ]
Setting global turbo flag based on CPU 0 P-state limits is problematic
as it limits max P-state request on every CPU on the system just based
on its P-state limits.
There are two cases in which global.turbo_disabled flag is set:
- When the MSR_IA32_MISC_ENABLE_TURBO_DISABLE bit is set to 1
in the MSR MSR_IA32_MISC_ENABLE. This bit can be only changed by
the system BIOS before power up.
- When the max non turbo P-state is same as max turbo P-state for CPU 0.
The second check is not a valid to decide global turbo state based on
the CPU 0. CPU 0 max turbo P-state can be same as max non turbo P-state,
but for other CPUs this may not be true.
There is no guarantee that max P-state limits are same for every CPU. This
is possible that during fusing max P-state for a CPU is constrained. Also
with the Intel Speed Select performance profile, CPU 0 may not be present
in all profiles. In this case the max non turbo and turbo P-state can be
set to the lowest possible P-state by the hardware when switched to
such profile. Since max non turbo and turbo P-state is same,
global.turbo_disabled flag will be set.
Once global.turbo_disabled is set, any scaling max and min frequency
update for any CPU will result in its max P-state constrained to the max
non turbo P-state.
Hence remove the check of max non turbo P-state equal to max turbo P-state
of CPU 0 to set global turbo disabled flag.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
[ rjw: Subject edit ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Stable-dep-of: ac4e04d9e378 ("cpufreq: intel_pstate: Unchecked MSR aceess in legacy mode")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 4426e6b4ecf632bb75d973051e1179b8bfac2320 ]
The original code would skip null delay pointers, but when the pointers
were converted to point within the spi_device struct, the check was not
updated to skip delays of zero. Hence all spi devices that didn't set
delays would fail to probe.
Fixes: 04e6bb0d6bb1 ("spi: modify set_cs_timing parameter")
Cc: stable@vger.kernel.org
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Link: https://patch.msgid.link/20250423-spi-tegra114-v1-1-2d608bcc12f9@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 373c36bf7914e3198ac2654dede499f340c52950 ]
cs_setup, cs_hold and cs_inactive points to fields of spi_device struct,
so there is no sense in checking them for NULL.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 04e6bb0d6bb1 ("spi: modify set_cs_timing parameter")
Signed-off-by: Alexander Danilenko <al.b.danilenko@gmail.com>
Link: https://lore.kernel.org/r/20230815092058.4083-1-al.b.danilenko@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: 4426e6b4ecf6 ("spi: tegra114: Don't fail set_cs_timing when delays are zero")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 43f0999af011fba646e015f0bb08b6c3002a0170 ]
Currently, when device mtu is updated, vmxnet3 updates netdev mtu, quiesces
the device and then reactivates it for the ESXi to know about the new mtu.
So, technically the OS stack can start using the new mtu before ESXi knows
about the new mtu.
This can lead to issues for TSO packets which use mss as per the new mtu
configured. This patch fixes this issue by moving the mtu write after
device quiesce.
Cc: stable@vger.kernel.org
Fixes: d1a890fa37f2 ("net: VMware virtual Ethernet NIC driver: vmxnet3")
Signed-off-by: Ronak Doshi <ronak.doshi@broadcom.com>
Acked-by: Guolin Yang <guolin.yang@broadcom.com>
Changes v1-> v2:
Moved MTU write after destroy of rx rings
Link: https://patch.msgid.link/20250515190457.8597-1-ronak.doshi@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ no WRITE_ONCE() in older trees ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 157ae5ffd76a2857ccb4b7ce40bc5a344ca00395 ]
Fix a potential deadlock bug. Observe that in the mtk-cqdma.c
file, functions like mtk_cqdma_issue_pending() and
mtk_cqdma_free_active_desc() properly acquire the pc lock before the vc
lock when handling pc and vc fields. However, mtk_cqdma_tx_status()
violates this order by first acquiring the vc lock before invoking
mtk_cqdma_find_active_desc(), which subsequently takes the pc lock. This
reversed locking sequence (vc → pc) contradicts the established
pc → vc order and creates deadlock risks.
Fix the issue by moving the vc lock acquisition code from
mtk_cqdma_find_active_desc() to mtk_cqdma_tx_status(). Ensure the pc lock
is acquired before the vc lock in the calling function to maintain correct
locking hierarchy. Note that since mtk_cqdma_find_active_desc() is a
static function with only one caller (mtk_cqdma_tx_status()), this
modification safely eliminates the deadlock possibility without affecting
other components.
This possible bug is found by an experimental static analysis tool
developed by our team. This tool analyzes the locking APIs to extract
function pairs that can be concurrently executed, and then analyzes the
instructions in the paired functions to identify possible concurrency bugs
including deadlocks, data races and atomicity violations.
Fixes: b1f01e48df5a ("dmaengine: mediatek: Add MediaTek Command-Queue DMA controller for MT6765 SoC")
Cc: stable@vger.kernel.org
Signed-off-by: Qiu-ji Chen <chenqiuji666@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250508073634.3719-1-chenqiuji666@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 1cfe51ef07ca3286581d612debfb0430eeccbb65 ]
If navi_amd_register_client() fails, the previous i2c_dw_probe() call
should be undone by a corresponding i2c_del_adapter() call, as already done
in the remove function.
Fixes: 17631e8ca2d3 ("i2c: designware: Add driver support for AMD NAVI GPU")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: <stable@vger.kernel.org> # v5.13+
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/fcd9651835a32979df8802b2db9504c523a8ebbb.1747158983.git.christophe.jaillet@wanadoo.fr
[ Adjust context ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit f063a28002e3350088b4577c5640882bf4ea17ea ]
The threaded IRQ function in this driver is reading the flag twice: once to
lock a mutex and once to unlock it. Even though the code setting the flag
is designed to prevent it, there are subtle cases where the flag could be
true at the mutex_lock stage and false at the mutex_unlock stage. This
results in the mutex not being unlocked, resulting in a deadlock.
Fix it by making the opt3001_irq() code generally more robust, reading the
flag into a variable and using the variable value at both stages.
Fixes: 94a9b7b1809f ("iio: light: add support for TI's opt3001 light sensor")
Cc: stable@vger.kernel.org
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patch.msgid.link/20250321-opt3001-irq-fix-v1-1-6c520d851562@bootlin.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
[ Adjust context ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 6ffa698674053e82e811520642db2650d00d2c01 ]
Follow the pattern of other drivers and use aligned_s64 for the
timestamp. This will ensure that the timestamp is correctly aligned on
all architectures.
Also move the unaligned.h header while touching this since it was the
only one not in alphabetical order.
Fixes: 13e945631c2f ("iio:chemical:pms7003: Fix timestamp alignment and prevent data leak.")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20250417-iio-more-timestamp-alignment-v1-4-eafac1e22318@baylibre.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
[ linux/unaligned.h => asm/unaligned.h ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit cf761e3dacc6ad5f65a4886d00da1f9681e6805a ]
Commit 7d5ec3d36123 ("PCI/MSI: Mask all unused MSI-X entries") introduced a
readl() from ENTRY_VECTOR_CTRL before the writel() to ENTRY_DATA.
This is correct, however some hardware, like the Sun Neptune chips, the NIU
module, will cause an error and/or fatal trap if any MSIX table entry is
read before the corresponding ENTRY_DATA field is written to.
Add an optional early writel() in msix_prepare_msi_desc().
Fixes: 7d5ec3d36123 ("PCI/MSI: Mask all unused MSI-X entries")
Signed-off-by: Jonathan Currier <dullfire@yahoo.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20241117234843.19236-2-dullfire@yahoo.com
[ Applied workaround to msix_setup_msi_descs() instead of msix_prepare_msi_desc() ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a7195a3d67dace056af7ca65144a11874df79562 upstream.
Correct the Mode Control Register (MODCTRL) offset for RZ/N MIIC.
According to the R-IN Engine and Ethernet Peripherals Manual (Rev.1.30)
[0], Table 10.1 "Ethernet Accessory Register List", MODCTRL is at offset
0x8, not 0x20 as previously defined.
Offset 0x20 actually maps to the Port Trigger Control Register (PTCTRL),
which controls PTP_MODE[3:0] and RGMII_CLKSEL[4]. Using this incorrect
definition prevented the driver from configuring the SW_MODE[4:0] bits
in MODCTRL, which control the internal connection of Ethernet ports. As
a result, the MIIC could not be switched into the correct mode, leading
to link setup failures and non-functional Ethernet ports on affected
systems.
[0] https://www.renesas.com/en/document/mah/rzn1d-group-rzn1s-group-rzn1l-group-users-manual-r-engine-and-ethernet-peripherals?r=1054571
Fixes: 7dc54d3b8d91 ("net: pcs: add Renesas MII converter driver")
Cc: stable@kernel.org
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://patch.msgid.link/20250901112019.16278-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 90fb7db49c6dbac961c6b8ebfd741141ffbc8545 upstream.
Fix a possible heap overflow in e1000_set_eeprom function by adding
input validation for the requested length of the change in the EEPROM.
In addition, change the variable type from int to size_t for better
code practices and rearrange declarations to RCT.
Cc: stable@vger.kernel.org
Fixes: bc7f75fa9788 ("[E1000E]: New pci-express e1000 driver (currently for ICH9 devices only)")
Co-developed-by: Mikael Wessel <post@mikaelkw.online>
Signed-off-by: Mikael Wessel <post@mikaelkw.online>
Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9dba9a45c348e8460da97c450cddf70b2056deb3 upstream.
Fix a use-after-free window by correcting the buffer release sequence in
the deferred receive path. The code freed the RQ buffer first and only
then cleared the context pointer under the lock. Concurrent paths (e.g.,
ABTS and the repost path) also inspect and release the same pointer under
the lock, so the old order could lead to double-free/UAF.
Note that the repost path already uses the correct pattern: detach the
pointer under the lock, then free it after dropping the lock. The
deferred path should do the same.
Fixes: 472e146d1cf3 ("scsi: lpfc: Correct upcalling nvmet_fc transport during io done downcall")
Cc: stable@vger.kernel.org
Signed-off-by: John Evans <evans1210144@gmail.com>
Link: https://lore.kernel.org/r/20250828044008.743-1-evans1210144@gmail.com
Reviewed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 71403f58b4bb6c13b71c05505593a355f697fd94 upstream.
We already disable the audio pins in hw_fini so
there is no need to do it again in sw_fini.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4481
Cc: oushixiong <oushixiong1025@163.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 5eeb16ca727f11278b2917fd4311a7d7efb0bbd6)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0e20450829ca3c1dbc2db536391537c57a40fe0b upstream.
The adapter->chan_stats[] array is initialized in
mwifiex_init_channel_scan_gap() with vmalloc(), which doesn't zero out
memory. The array is filled in mwifiex_update_chan_statistics()
and then the user can query the data in mwifiex_cfg80211_dump_survey().
There are two potential issues here. What if the user calls
mwifiex_cfg80211_dump_survey() before the data has been filled in.
Also the mwifiex_update_chan_statistics() function doesn't necessarily
initialize the whole array. Since the array was not initialized at
the start that could result in an information leak.
Also this array is pretty small. It's a maximum of 900 bytes so it's
more appropriate to use kcalloc() instead vmalloc().
Cc: stable@vger.kernel.org
Fixes: bf35443314ac ("mwifiex: channel statistics support for mwifiex")
Suggested-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/20250815023055.477719-1-rongqianfeng@vivo.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 44822df89e8f3386871d9cad563ece8e2fd8f0e7 upstream.
In __iodyn_find_io_region(), pcmcia_make_resource() is assigned to
res and used in pci_bus_alloc_resource(). There is a dereference of res
in pci_bus_alloc_resource(), which could lead to a NULL pointer
dereference on failure of pcmcia_make_resource().
Fix this bug by adding a check of res.
Cc: stable@vger.kernel.org
Fixes: 49b1153adfe1 ("pcmcia: move all pcmcia_resource_ops providers into one module")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f3ef7110924b897f4b79db9f7ac75d319ec09c4a upstream.
If krealloc_array() fails in iort_rmr_alloc_sids(), the function returns
NULL but does not free the original 'sids' allocation. This results in a
memory leak since the caller overwrites the original pointer with the
NULL return value.
Fixes: 491cf4a6735a ("ACPI/IORT: Add support to retrieve IORT RMR reserved regions")
Cc: <stable@vger.kernel.org> # 6.0.x
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Link: https://lore.kernel.org/r/20250828112243.61460-1-linmq006@gmail.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 9b2bfdbf43adb9929c5ddcdd96efedbf1c88cf53 ]
When transmitting a PTP frame which is timestamp using 2 step, the
following warning appears if CONFIG_PROVE_LOCKING is enabled:
=============================
[ BUG: Invalid wait context ]
6.17.0-rc1-00326-ge6160462704e #427 Not tainted
-----------------------------
ptp4l/119 is trying to lock:
c2a44ed4 (&vsc8531->ts_lock){+.+.}-{3:3}, at: vsc85xx_txtstamp+0x50/0xac
other info that might help us debug this:
context-{4:4}
4 locks held by ptp4l/119:
#0: c145f068 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0x58/0x1440
#1: c29df974 (dev->qdisc_tx_busylock ?: &qdisc_tx_busylock){+...}-{2:2}, at: __dev_queue_xmit+0x5c4/0x1440
#2: c2aaaad0 (_xmit_ETHER#2){+.-.}-{2:2}, at: sch_direct_xmit+0x108/0x350
#3: c2aac170 (&lan966x->tx_lock){+.-.}-{2:2}, at: lan966x_port_xmit+0xd0/0x350
stack backtrace:
CPU: 0 UID: 0 PID: 119 Comm: ptp4l Not tainted 6.17.0-rc1-00326-ge6160462704e #427 NONE
Hardware name: Generic DT based system
Call trace:
unwind_backtrace from show_stack+0x10/0x14
show_stack from dump_stack_lvl+0x7c/0xac
dump_stack_lvl from __lock_acquire+0x8e8/0x29dc
__lock_acquire from lock_acquire+0x108/0x38c
lock_acquire from __mutex_lock+0xb0/0xe78
__mutex_lock from mutex_lock_nested+0x1c/0x24
mutex_lock_nested from vsc85xx_txtstamp+0x50/0xac
vsc85xx_txtstamp from lan966x_fdma_xmit+0xd8/0x3a8
lan966x_fdma_xmit from lan966x_port_xmit+0x1bc/0x350
lan966x_port_xmit from dev_hard_start_xmit+0xc8/0x2c0
dev_hard_start_xmit from sch_direct_xmit+0x8c/0x350
sch_direct_xmit from __dev_queue_xmit+0x680/0x1440
__dev_queue_xmit from packet_sendmsg+0xfa4/0x1568
packet_sendmsg from __sys_sendto+0x110/0x19c
__sys_sendto from sys_send+0x18/0x20
sys_send from ret_fast_syscall+0x0/0x1c
Exception stack(0xf0b05fa8 to 0xf0b05ff0)
5fa0: 00000001 0000000e 0000000e 0004b47a 0000003a 00000000
5fc0: 00000001 0000000e 00000000 00000121 0004af58 00044874 00000000 00000000
5fe0: 00000001 bee9d420 00025a10 b6e75c7c
So, instead of using the ts_lock for tx_queue, use the spinlock that
skb_buff_head has.
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Fixes: 7d272e63e0979d ("net: phy: mscc: timestamping and PHC support")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://patch.msgid.link/20250902121259.3257536-1-horatiu.vultur@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4844123fe0b853a4982c02666cb3fd863d701d50 ]
If alloc_skb() fails in pad_compress_skb(), it returns NULL without
releasing the old skb. The caller does:
skb = pad_compress_skb(ppp, skb);
if (!skb)
goto drop;
drop:
kfree_skb(skb);
When pad_compress_skb() returns NULL, the reference to the old skb is
lost and kfree_skb(skb) ends up doing nothing, leading to a memory leak.
Align pad_compress_skb() semantics with realloc(): only free the old
skb if allocation and compression succeed. At the call site, use the
new_skb variable so the original skb is not lost when pad_compress_skb()
fails.
Fixes: b3f9b92a6ec1 ("[PPP]: add PPP MPPE encryption module")
Signed-off-by: Qingfang Deng <dqfext@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Yue Haibing <yuehaibing@huawei.com>
Link: https://patch.msgid.link/20250903100726.269839-1-dqfext@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9e3d71a92e561ccc77025689dab25d201fee7a3e ]
All paths in probe that call goto defer do so before assigning phydev
and thus it makes sense to cleanup the prior index. It also fixes a bug
where index 0 does not get cleaned up.
Fixes: b7d3e3d3d21a ("net: thunderx: Don't leak phy device references on -EPROBE_DEFER condition.")
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250901213314.48599-1-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9d28f94912589f04ab51fbccaef287d4f40e0d1f ]
phy_np needs to get freed, just like the other child nodes.
Fixes: 5fc7cf179449 ("net: thunderx: Cleanup PHY probing code.")
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250901213018.47392-1-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c786794bd27b0d7a5fd9063695df83206009be59 ]
If the ssid_eid[1] length is more that 32 it leads to memory corruption.
Fixes: a910e4a94f69 ("cw1200: add driver for the ST-E CW1100 & CW1200 WLAN chipsets")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/2a40f5ec7617144aef412034c12919a4927d90ad.1756456951.git.dan.carpenter@linaro.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f8f15f6742b8874e59c9c715d0af3474608310ad ]
If the ssidie[1] length is more that 32 it leads to memory corruption.
Fixes: a910e4a94f69 ("cw1200: add driver for the ST-E CW1100 & CW1200 WLAN chipsets")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/e91fb43fcedc4893b604dfb973131661510901a7.1756456951.git.dan.carpenter@linaro.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d4736737110ffa83d29f1c5d17b26113864205f6 ]
When sending llc packets with vlan tx offload, the hardware fails to
actually add the tag. Deal with this by fixing it up in software.
Fixes: 656e705243fd ("net-next: mediatek: add support for MT7623 ethernet")
Reported-by: Thibaut VARENE <hacks@slashdirt.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250831182007.51619-1-nbd@nbd.name
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a556f06338e1d5a85af0e32ecb46e365547f92b9 ]
list_first_entry() never returns NULL - if the list is empty, it still
returns a pointer to an invalid object, leading to potential invalid
memory access when dereferenced.
Fix this by using list_first_entry_or_null instead of list_first_entry.
Fixes: e3219ce6a775 ("i40e: Add support for client interface for IWARP driver")
Signed-off-by: Zhen Ni <zhen.ni@easystack.cn>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6bc8a5098bf4a365c4086a4a4130bfab10a58260 ]
macb_start_xmit and macb_tx_poll can be called with bottom-halves
disabled (e.g. from softirq) as well as with interrupts disabled (with
netpoll). Because of this, all other functions taking tx_ptr_lock must
use spin_lock_irqsave.
Fixes: 138badbc21a0 ("net: macb: use NAPI for TX completion path")
Reported-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Link: https://patch.msgid.link/20250829143521.1686062-1-sean.anderson@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
