summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2011-05-26Merge branch 'for-linus' of ↵Linus Torvalds18-150/+505
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: RDMA/cma: Save PID of ID's owner RDMA/cma: Add support for netlink statistics export RDMA/cma: Pass QP type into rdma_create_id() RDMA: Update exported headers list RDMA/cma: Export enum cma_state in <rdma/rdma_cm.h> RDMA/nes: Add a check for strict_strtoul() RDMA/cxgb3: Don't post zero-byte read if endpoint is going away RDMA/cxgb4: Use completion objects for event blocking IB/srp: Fix integer -> pointer cast warnings IB: Add devnode methods to cm_class and umad_class IB/mad: Return EPROTONOSUPPORT when an RDMA device lacks the QP required IB/uverbs: Add devnode method to set path/mode RDMA/ucma: Add .nodename/.mode to tell userspace where to create device node RDMA: Add netlink infrastructure RDMA: Add error handling to ib_core_init()
2011-05-26Merge branch 'spi/next' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds9-159/+96
* 'spi/next' of git://git.secretlab.ca/git/linux-2.6: spi/amba-pl022: work in polling or interrupt mode if pl022_dma_probe fails spi/spi_s3c24xx: Use spi_bitbang_stop instead of spi_unregister_master in s3c24xx_spi_remove spi/spi_nuc900: Use spi_bitbang_stop instead of spi_unregister_master in nuc900_spi_remove spi/spi_tegra: use spi_unregister_master() instead of spi_master_put() spi/spi_sh: use spi_unregister_master instead of spi_master_put in remove path spi: Use void pointers for data in simple SPI I/O operations spi/pl022: use cpu_relax in the busy loop spi/pl022: mark driver non-experimental spi/pl022: timeout on polled transfer v2 spi/dw_spi: improve the interrupt mode with the batch ops spi/dw_spi: change poll mode transfer from byte ops to batch ops spi/dw_spi: remove the un-necessary flush() spi/dw_spi: unify the low level read/write routines
2011-05-26Merge branch 'omap-for-linus' of ↵Linus Torvalds2-193/+0
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (33 commits) OMAP3: PM: Boot message is not an error, and not helpful, remove it OMAP3: cpuidle: change the power domains modes determination logic OMAP3: cpuidle: code rework for improved readability OMAP3: cpuidle: re-organize the C-states data OMAP3: clean-up mach specific cpuidle data structures OMAP3 cpuidle: remove useless SDP specific timings usb: otg: OMAP4430: Powerdown the internal PHY when USB is disabled usb: otg: OMAP4430: Fixing the omap4430_phy_init function usb: musb: am35x: fix compile error when building am35x usb: musb: OMAP4430: Power down the PHY during board init omap: drop board-igep0030.c omap: igep0020: add support for IGEP3 omap: igep0020: minor refactoring omap: igep0020: name refactoring for future merge with IGEP3 omap: Remove support for omap2evm arm: omap2plus: GPIO cleanup omap: musb: introduce default board config omap: move detection of NAND CS to common-board-devices omap: use common initialization for PMIC i2c bus omap: consolidate touch screen initialization among different boards ...
2011-05-26Merge branch 'for-linus' of ↵Linus Torvalds2-0/+265
git://git.kernel.org/pub/scm/linux/kernel/git/djm/tmem * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/djm/tmem: xen: cleancache shim to Xen Transcendent Memory ocfs2: add cleancache support ext4: add cleancache support btrfs: add cleancache support ext3: add cleancache support mm/fs: add hooks to support cleancache mm: cleancache core ops functions and config fs: add field to superblock to support cleancache mm/fs: cleancache documentation Fix up trivial conflict in fs/btrfs/extent_io.c due to includes
2011-05-26xen: cleancache shim to Xen Transcendent MemoryDan Magenheimer2-0/+265
This patch provides a shim between the kernel-internal cleancache API (see Documentation/mm/cleancache.txt) and the Xen Transcendent Memory ABI (see http://oss.oracle.com/projects/tmem). Xen tmem provides "hypervisor RAM" as an ephemeral page-oriented pseudo-RAM store for cleancache pages, shared cleancache pages, and frontswap pages. Tmem provides enterprise-quality concurrency, full save/restore and live migration support, compression and deduplication. A presentation showing up to 8% faster performance and up to 52% reduction in sectors read on a kernel compile workload, despite aggressive in-kernel page reclamation ("self-ballooning") can be found at: http://oss.oracle.com/projects/tmem/dist/documentation/presentations/TranscendentMemoryXenSummit2010.pdf Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com> Reviewed-by: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Rik Van Riel <riel@redhat.com> Cc: Jan Beulich <JBeulich@novell.com> Cc: Chris Mason <chris.mason@oracle.com> Cc: Andreas Dilger <adilger@sun.com> Cc: Ted Ts'o <tytso@mit.edu> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <joel.becker@oracle.com> Cc: Nitin Gupta <ngupta@vflare.org>
2011-05-26video: mb862xx: udelay need linux/delay.hStephen Rothwell1-0/+1
Fix this: drivers/video/mb862xx/mb862xx-i2c.c: In function 'mb862xx_i2c_wait_event': drivers/video/mb862xx/mb862xx-i2c.c:25: error: implicit declaration of function 'udelay' caused by commit f8a6b1f44833 ("video: mb862xx: add support for controller's I2C bus adapter"). Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds141-1041/+1448
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (89 commits) bonding: documentation and code cleanup for resend_igmp bonding: prevent deadlock on slave store with alb mode (v3) net: hold rtnl again in dump callbacks Add Fujitsu 1000base-SX PCI ID to tg3 bnx2x: protect sequence increment with mutex sch_sfq: fix peek() implementation isdn: netjet - blacklist Digium TDM400P via-velocity: don't annotate MAC registers as packed xen: netfront: hold RTNL when updating features. sctp: fix memory leak of the ASCONF queue when free asoc net: make dev_disable_lro use physical device if passed a vlan dev (v2) net: move is_vlan_dev into public header file (v2) bug.h: Fix build with CONFIG_PRINTK disabled. wireless: fix fatal kernel-doc error + warning in mac80211.h wireless: fix cfg80211.h new kernel-doc warnings iwlagn: dbg_fixed_rate only used when CONFIG_MAC80211_DEBUGFS enabled dst: catch uninitialized metrics be2net: hash key for rss-config cmd not set bridge: initialize fake_rtable metrics net: fix __dst_destroy_metrics_generic() ... Fix up trivial conflicts in drivers/staging/brcm80211/brcmfmac/wl_cfg80211.c
2011-05-26Merge branch 'for-linus' of ↵Linus Torvalds32-552/+5293
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (75 commits) mmc: core: eMMC bus width may not work on all platforms mmc: sdhci: Auto-CMD23 fixes. mmc: sdhci: Auto-CMD23 support. mmc: core: Block CMD23 support for UHS104/SDXC cards. mmc: sdhci: Implement MMC_CAP_CMD23 for SDHCI. mmc: core: Use CMD23 for multiblock transfers when we can. mmc: quirks: Add/remove quirks conditional support. mmc: Add new VUB300 USB-to-SD/SDIO/MMC driver mmc: sdhci-pxa: Add quirks for DMA/ADMA to match h/w mmc: core: duplicated trial with same freq in mmc_rescan_try_freq() mmc: core: add support for eMMC Dual Data Rate mmc: core: eMMC signal voltage does not use CMD11 mmc: sdhci-pxa: add platform code for UHS signaling mmc: sdhci: add hooks for setting UHS in platform specific code mmc: core: clear MMC_PM_KEEP_POWER flag on resume mmc: dw_mmc: fixed wrong regulator_enable in suspend/resume mmc: sdhi: allow powering down controller with no card inserted mmc: tmio: runtime suspend the controller, where possible mmc: sdhi: support up to 3 interrupt sources mmc: sdhi: print physical base address and clock rate ...
2011-05-26Merge branch 'hwmon-for-linus' of ↵Linus Torvalds21-143/+1195
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: hwmon: New driver for the SMSC EMC6W201 hwmon: (abituguru) Depend on DMI hwmon: (it87) Use request_muxed_region hwmon: (sch5627) Trigger Vbat measurements hwmon: (sch5627) Add sch5627_send_cmd function i8k: Integrate with the hwmon subsystem hwmon: (max6650) Properly support the MAX6650 hwmon: (max6650) Drop device detection Move ACPI power meter driver to hwmon hwmon: (f71882fg) Add support for F71808A hwmon: (f71882fg) Split has_beep in fan_has_beep and temp_has_beep hwmon: (asc7621) Drop duplicate dependency hwmon: (jc42) Change detection class hwmon: Add driver for AMD family 15h processor power information hwmon: (k10temp) Add support for Fam15h (Bulldozer) hwmon: Use helper functions to set and get driver data i8k: Avoid lahf in 64-bit code
2011-05-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tileLinus Torvalds5-6/+174
* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: (26 commits) arch/tile: prefer "tilepro" as the name of the 32-bit architecture compat: include aio_abi.h for aio_context_t arch/tile: cleanups for tilegx compat mode arch/tile: allocate PCI IRQs later in boot arch/tile: support signal "exception-trace" hook arch/tile: use better definitions of xchg() and cmpxchg() include/linux/compat.h: coding-style fixes tile: add an RTC driver for the Tilera hypervisor arch/tile: finish enabling support for TILE-Gx 64-bit chip compat: fixes to allow working with tile arch arch/tile: update defconfig file to something more useful tile: do_hardwall_trap: do not play with task->sighand tile: replace mm->cpu_vm_mask with mm_cpumask() tile,mn10300: add device parameter to dma_cache_sync() audit: support the "standard" <asm-generic/unistd.h> arch/tile: clarify flush_buffer()/finv_buffer() function names arch/tile: kernel-related cleanups from removing static page size arch/tile: various header improvements for building drivers arch/tile: disable GX prefetcher during cache flush arch/tile: tolerate disabling CONFIG_BLK_DEV_INITRD ...
2011-05-26Merge branch 'for-torvalds' of ↵Linus Torvalds12-4/+3561
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson * 'for-torvalds' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson: mach-ux500: voltage domain regulators for DB8500 cpufreq: make DB8500 cpufreq driver compile cpufreq: update DB8500 cpufreq driver mach-ux500: move CPUfreq driver to cpufreq subsystem mfd: add DB5500 PRCMU driver mfd: update DB8500 PRCMU driver mach-ux500: move the DB8500 PRCMU driver to MFD mach-ux500: make PRCMU base address dynamic mach-ux500: rename PRCMU driver per SoC mach-ux500: update ASIC version detection mach-ux500: update SoC and board IRQ handling mach-ux500: update the DB5500 register file mach-ux500: update the DB8500 register file
2011-05-26Merge branch 'rmobile-latest' of ↵Linus Torvalds2-12/+32
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6 * 'rmobile-latest' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (34 commits) ARM: mach-shmobile: mackerel: add renesas_usbhs support for USB1 ARM: mach-shmobile: Correct the G4EVM SDHI0 I/O range. ARM: arch-shmobile: sh7372: add renesas_usbhs irq support ARM: mach-shmobile: sh73a0: mark DMA slave ID 0 as invalid ARM: mach-shmobile: mark DMA slave ID 0 as invalid ARM: mach-shmobile: Enable DMAEngine for SDHI on AG5EVM ARM: mach-shmobile: Enable DMAEngine for MMCIF on AG5EVM ARM: mach-shmobile: sh73a0 DMA Engine support for SY-DMAC dmaengine: shdma: Update SH_DMAC_MAX_CHANNELS to 20 dmaengine: shdma: Fix SH_DMAC_MAX_CHANNELS handling dmaengine: shdma: Make second memory window optional ARM: mach-shmobile: Tidy up after SH7372 pm changes. ARM: mach-shmobile: sh7372 Core Standby CPUIdle ARM: mach-shmobile: CPUIdle support ARM: mach-shmobile: sh7372 Core Standby Suspend-to-RAM ARM: mach-shmobile: Suspend-to-RAM support mailmap: Add entry for Damian Hobson-Garcia. ARM: switch mackerel to dynamically manage the platform camera ARM: mach-shmobile: Add SDHI support for AG5EVM and sh73a0 ARM: arch-shmobile: Use multiple irq vectors for SDHI ...
2011-05-26bonding: documentation and code cleanup for resend_igmpFlavio Leitner2-10/+12
Improves the documentation about how IGMP resend parameter works, fix two missing checks and coding style issues. Signed-off-by: Flavio Leitner <fbl@redhat.com> Acked-by: Rick Jones <rick.jones2@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-26bonding: prevent deadlock on slave store with alb mode (v3)Neil Horman3-16/+10
This soft lockup was recently reported: [root@dell-per715-01 ~]# echo +bond5 > /sys/class/net/bonding_masters [root@dell-per715-01 ~]# echo +eth1 > /sys/class/net/bond5/bonding/slaves bonding: bond5: doing slave updates when interface is down. bonding bond5: master_dev is not up in bond_enslave [root@dell-per715-01 ~]# echo -eth1 > /sys/class/net/bond5/bonding/slaves bonding: bond5: doing slave updates when interface is down. BUG: soft lockup - CPU#12 stuck for 60s! [bash:6444] CPU 12: Modules linked in: bonding autofs4 hidp rfcomm l2cap bluetooth lockd sunrpc be2d Pid: 6444, comm: bash Not tainted 2.6.18-262.el5 #1 RIP: 0010:[<ffffffff80064bf0>] [<ffffffff80064bf0>] .text.lock.spinlock+0x26/00 RSP: 0018:ffff810113167da8 EFLAGS: 00000286 RAX: ffff810113167fd8 RBX: ffff810123a47800 RCX: 0000000000ff1025 RDX: 0000000000000000 RSI: ffff810123a47800 RDI: ffff81021b57f6f8 RBP: ffff81021b57f500 R08: 0000000000000000 R09: 000000000000000c R10: 00000000ffffffff R11: ffff81011d41c000 R12: ffff81021b57f000 R13: 0000000000000000 R14: 0000000000000282 R15: 0000000000000282 FS: 00002b3b41ef3f50(0000) GS:ffff810123b27940(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00002b3b456dd000 CR3: 000000031fc60000 CR4: 00000000000006e0 Call Trace: [<ffffffff80064af9>] _spin_lock_bh+0x9/0x14 [<ffffffff886937d7>] :bonding:tlb_clear_slave+0x22/0xa1 [<ffffffff8869423c>] :bonding:bond_alb_deinit_slave+0xba/0xf0 [<ffffffff8868dda6>] :bonding:bond_release+0x1b4/0x450 [<ffffffff8006457b>] __down_write_nested+0x12/0x92 [<ffffffff88696ae4>] :bonding:bonding_store_slaves+0x25c/0x2f7 [<ffffffff801106f7>] sysfs_write_file+0xb9/0xe8 [<ffffffff80016b87>] vfs_write+0xce/0x174 [<ffffffff80017450>] sys_write+0x45/0x6e [<ffffffff8005d28d>] tracesys+0xd5/0xe0 It occurs because we are able to change the slave configuarion of a bond while the bond interface is down. The bonding driver initializes some data structures only after its ndo_open routine is called. Among them is the initalization of the alb tx and rx hash locks. So if we add or remove a slave without first opening the bond master device, we run the risk of trying to lock/unlock a spinlock that has garbage for data in it, which results in our above softlock. Note that sometimes this works, because in many cases an unlocked spinlock has the raw_lock parameter initialized to zero (meaning that the kzalloc of the net_device private data is equivalent to calling spin_lock_init), but thats not true in all cases, and we aren't guaranteed that condition, so we need to pass the relevant spinlocks through the spin_lock_init function. Fix it by moving the spin_lock_init calls for the tx and rx hashtable locks to the ndo_init path, so they are ready for use by the bond_store_slaves path. Change notes: v2) Based on conversation with Jay and Nicolas it seems that the ability to enslave devices while the bond master is down should be safe to do. As such this is an outlier bug, and so instead we'll just initalize the errant spinlocks in the init path rather than the open path, solving the problem. We'll also remove the warnings about the bond being down during enslave operations, since it should be safe v3) Fix spelling error Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Reported-by: jtluka@redhat.com CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: nicolas.2p.debian@gmail.com CC: "David S. Miller" <davem@davemloft.net> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-26Add Fujitsu 1000base-SX PCI ID to tg3Meelis Roos1-0/+1
This patch adds the PCI ID of Fujitsu 1000base-SX NIC to tg3 driver. Tested to detect the card, MAC and serdes, not tested with link at the moment since I have no fiber switch here. I did not add new constants to the pci_ids.h header file since these constants are used only here. Signed-off-by: Meelis Roos <mroos@linux.ee> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-26bnx2x: protect sequence increment with mutexDmitry Kravkov1-1/+2
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-26isdn: netjet - blacklist Digium TDM400PPrarit Bhargava1-0/+6
[2nd try ... 1st attempt didn't make it to netdev mailing list] A quick google search reveals that people with this card are blacklisting it in the initramfs and in the module blacklist based on a statement that it is unsupported. Since the older Digium is also unsupported I'm pretty confident that this newer card is also not supported. lspci -xxx -vv shows 04:07.0 Communication controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface Subsystem: Device b100:0003 P. ----8<---- The Asterisk Voice Card, DIGIUM TDM400P is unsupported by the netjet driver. Blacklist it like the Digium X100P/X101P card. Signed-off-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-26via-velocity: don't annotate MAC registers as packedUlrich Hecht1-1/+1
On ARM, memory accesses through packed pointers behave in unexpected ways in GCC releases 4.3 and higher; see https://lkml.org/lkml/2011/2/2/163 for discussion. In this particular case, 32-bit I/O registers are accessed bytewise, causing incorrect setting of the DMA address registers which in turn leads to an error interrupt storm that brings the system to a halt. Since the mac_regs structure does not need any packing anyway, this patch simply removes the attribute to fix the issue. Signed-off-by: Ulrich Hecht <uli@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-26xen: netfront: hold RTNL when updating features.Ian Campbell1-0/+2
Konrad reports: [ 0.930811] RTNL: assertion failed at /home/konrad/ssd/linux/net/core/dev.c (5258) [ 0.930821] Pid: 22, comm: xenwatch Not tainted 2.6.39-05193-gd762f43 #1 [ 0.930825] Call Trace: [ 0.930834] [<ffffffff8143bd0e>] __netdev_update_features+0xae/0xe0 [ 0.930840] [<ffffffff8143dd41>] netdev_update_features+0x11/0x30 [ 0.930847] [<ffffffffa0037105>] netback_changed+0x4e5/0x800 [xen_netfront] [ 0.930854] [<ffffffff8132a838>] xenbus_otherend_changed+0xa8/0xb0 [ 0.930860] [<ffffffff8157ca99>] ? _raw_spin_unlock_irqrestore+0x19/0x20 [ 0.930866] [<ffffffff8132adfe>] backend_changed+0xe/0x10 [ 0.930871] [<ffffffff8132875a>] xenwatch_thread+0xba/0x180 [ 0.930876] [<ffffffff810a8ba0>] ? wake_up_bit+0x40/0x40 [ 0.930881] [<ffffffff813286a0>] ? split+0xf0/0xf0 [ 0.930886] [<ffffffff810a8646>] kthread+0x96/0xa0 [ 0.930891] [<ffffffff815855a4>] kernel_thread_helper+0x4/0x10 [ 0.930896] [<ffffffff815846b3>] ? int_ret_from_sys_call+0x7/0x1b [ 0.930901] [<ffffffff8157cf61>] ? retint_restore_args+0x5/0x6 [ 0.930906] [<ffffffff815855a0>] ? gs_change+0x13/0x13 This update happens in xenbus watch callback context and hence does not already hold the rtnl. Take the lock as necessary. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-26mmc: core: eMMC bus width may not work on all platformsPhilip Rakity1-10/+102
CMD19 -- The offical way to validate bus widths from the JEDEC spec does not work on all platforms. Some platforms that use PCI/PCIe to connect their SD controllers are known to fail. If the quirk MMC_BUS_WIDTH_TEST is not defined we try to figure out the bus width by reading the ext_csd at different bus widths and compare this against the ext_csd read in 1 bit mode. If no ext_csd is available we default to 1 bit operations. Code has been tested on mmp2 against 8 bit eMMC and Transcend 2GB card that is known to not work in 4 bit mode. The physical pins on the card are not present to support 4 bit operation. Signed-off-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-26mmc: sdhci: Auto-CMD23 fixes.Andrei Warkentin1-2/+2
Fixes bugs in Auto-CMD23 feature enable decision. Auto-CMD23 should be enabled if host is >= v3, and SDMA is not in use. USE_ADMA | USE_SDMA | Auto-CMD23 ---------+----------+----------- 0 | 0 | 1 ---------+----------+----------- 0 | 1 | 0 ---------+----------+----------- 1 | 0 | 1 ---------+----------+----------- 1 | 1 | 1 Signed-off-by: Andrei Warkentin <andreiw@motorola.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-26mmc: sdhci: Auto-CMD23 support.Andrei Warkentin2-1/+18
Enables Auto-CMD23 support where available (SDHCI 3.0 controllers) Signed-off-by: Andrei Warkentin <andreiw@motorola.com> Tested-by: Arindam Nath <arindam.nath@amd.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-26mmc: core: Block CMD23 support for UHS104/SDXC cards.Andrei Warkentin2-3/+8
SD cards operating at UHS104 or better support SET_BLOCK_COUNT. Signed-off-by: Andrei Warkentin <andreiw@motorola.com> Reviewed-by: Arindam Nath <arindam.nath@amd.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-26mmc: sdhci: Implement MMC_CAP_CMD23 for SDHCI.Andrei Warkentin2-17/+48
Implements support for multiblock transfers bounded by SET_BLOCK_COUNT (CMD23). Signed-off-by: Andrei Warkentin <andreiw@motorola.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-26mmc: core: Use CMD23 for multiblock transfers when we can.Andrei Warkentin1-29/+79
CMD23-prefixed instead of open-ended multiblock transfers have a performance advantage on some MMC cards. Signed-off-by: Andrei Warkentin <andreiw@motorola.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-26Merge branches 'cma', 'cxgb3', 'cxgb4', 'misc', 'nes', 'netlink', 'srp' and ↵Roland Dreier18-147/+500
'uverbs' into for-next
2011-05-26RDMA/cma: Save PID of ID's ownerNir Muchtar1-0/+6
Save the PID associated with an RDMA CM ID for reporting via netlink. Signed-off-by: Nir Muchtar <nirm@voltaire.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-05-26RDMA/cma: Add support for netlink statistics exportNir Muchtar1-0/+99
Add callbacks and data types for statistics export of all current devices/ids. The schema for RDMA CM is a series of netlink messages. Each one contains an rdma_cm_stat struct. Additionally, two netlink attributes are created for the addresses for each message (if applicable). Their types used are: RDMA_NL_RDMA_CM_ATTR_SRC_ADDR (The source address for this ID) RDMA_NL_RDMA_CM_ATTR_DST_ADDR (The destination address for this ID) sockaddr_* structs are encapsulated within these attributes. In other words, every transaction contains a series of messages like: -------message 1------- struct rdma_cm_id_stats { __u32 qp_num; __u32 bound_dev_if; __u32 port_space; __s32 pid; __u8 cm_state; __u8 node_type; __u8 port_num; __u8 reserved; } RDMA_NL_RDMA_CM_ATTR_SRC_ADDR attribute - contains the source address RDMA_NL_RDMA_CM_ATTR_DST_ADDR attribute - contains the destination address -------end 1------- -------message 2------- struct rdma_cm_id_stats RDMA_NL_RDMA_CM_ATTR_SRC_ADDR attribute RDMA_NL_RDMA_CM_ATTR_DST_ADDR attribute -------end 2------- Signed-off-by: Nir Muchtar <nirm@voltaire.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-05-26RDMA/cma: Pass QP type into rdma_create_id()Sean Hefty3-24/+40
The RDMA CM currently infers the QP type from the port space selected by the user. In the future (eg with RDMA_PS_IB or XRC), there may not be a 1-1 correspondence between port space and QP type. For netlink export of RDMA CM state, we want to export the QP type to userspace, so it is cleaner to explicitly associate a QP type to an ID. Modify rdma_create_id() to allow the user to specify the QP type, and use it to make our selections of datagram versus connected mode. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-05-26RDMA/cma: Export enum cma_state in <rdma/rdma_cm.h>Nir Muchtar1-90/+80
Move cma.c's internal definition of enum cma_state to enum rdma_cm_state in an exported header so that it can be exported via RDMA netlink. Signed-off-by: Nir Muchtar <nirm@voltaire.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-05-25Merge branch 'for-linus' of ↵Linus Torvalds1-9/+18
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (23 commits) ceph: fix cap flush race reentrancy libceph: subscribe to osdmap when cluster is full libceph: handle new osdmap down/state change encoding rbd: handle online resize of underlying rbd image ceph: avoid inode lookup on nfs fh reconnect ceph: use LOOKUPINO to make unconnected nfs fh more reliable rbd: use snprintf for disk->disk_name rbd: cleanup: make kfree match kmalloc rbd: warn on update_snaps failure on notify ceph: check return value for start_request in writepages ceph: remove useless check libceph: add missing breaks in addr_set_port libceph: fix TAG_WAIT case ceph: fix broken comparison in readdir loop libceph: fix osdmap timestamp assignment ceph: fix rare potential cap leak libceph: use snprintf for unknown addrs libceph: use snprintf for formatting object name ceph: use snprintf for dirstat content libceph: fix uninitialized value when no get_authorizer method is set ...
2011-05-25hwmon: New driver for the SMSC EMC6W201Jean Delvare3-0/+550
This is a new driver for the SMSC EMC6W201 hardware monitoring device. The device is functionally close to the EMC6D100 series, but is register-incompatible. Signed-off-by: Jean Delvare <khali@linux-fr.org> Tested-by: Harry G McGavran Jr <w5pny@arrl.net> Tested-by: Jeff Rickman <jrickman@myamigos.us> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-05-25hwmon: (abituguru) Depend on DMIJean Delvare3-18/+2
The abituguru drivers are only built on X86, where DMI support is now enabled by default. So let these drivers depend on DMI, for the following gains: * Robustness and safety. Detection of these devices is weak and uses non-standard methods, it should really be limited to Abit boards unless the user explicitly asks otherwise. * Code simplicity. The code is easier to read without ifdefs. * Better build testing coverage. Now there's only one way to build the drivers, so no risk of build failure on exotic systems. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com> Acked-by: Alistair John Strachan <alistair@devzero.co.uk> Acked-by: Hans de Goede <hdegoede@redhat.com>
2011-05-25hwmon: (it87) Use request_muxed_regionNat Gurumoorthy1-12/+19
Serialize access to the hardware by using "request_muxed_region" macro defined by Alan Cox. Call to this macro will hold off the requestor if the resource is currently busy. "superio_enter" will return an error if call to "request_muxed_region" fails. Rest of the code change is to ripple an error return from superio_enter to the top level. Signed-off-by: Nat Gurumoorthy <natg@google.com> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-05-25hwmon: (sch5627) Trigger Vbat measurementsHans de Goede1-1/+22
The sch5627 needs to be explicitly told to start an adc conversion for Vbat, once in a while. Without this Vbat may read 0, and will never get updated. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-05-25hwmon: (sch5627) Add sch5627_send_cmd functionHans de Goede1-4/+19
This patch generalizes sch5627_read_virtual_reg so that it can be used to write virtual regs too. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Sigend-off-by: Jean Delvare <khali@linux-fr.org>
2011-05-25i8k: Integrate with the hwmon subsystemJean Delvare1-0/+162
Let i8k create an hwmon class device so that libsensors will expose the CPU temperature and fan speeds to monitoring applications. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Massimo Dal Zotto <dz@debian.org>
2011-05-25hwmon: (max6650) Properly support the MAX6650Jean Delvare1-6/+28
The MAX6650 has only one fan input. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: "Hans J. Koch" <hjk@hansjkoch.de> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-05-25hwmon: (max6650) Drop device detectionJean Delvare1-44/+0
MAX6650 device detection is unreliable, we got reports of false positives. We now have many ways to let users instantiate the devices explicitly, so unreliable detection should be dropped. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: "Hans J. Koch" <hjk@hansjkoch.de> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-05-25Move ACPI power meter driver to hwmonJean Delvare5-12/+11
As discussed earlier, the ACPI power meter driver would better live in drivers/hwmon, as its only purpose is to create hwmon-style interfaces for ACPI 4.0 power meter devices. Users are more likely to look for it there, and less likely to accidentally hide it by unselecting its dependencies. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: "Darrick J. Wong" <djwong@us.ibm.com> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com> Cc: Len Brown <lenb@kernel.org>
2011-05-25hwmon: (f71882fg) Add support for F71808AHans de Goede2-4/+85
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-05-25hwmon: (f71882fg) Split has_beep in fan_has_beep and temp_has_beepHans de Goede1-7/+21
Needed for upcoming support of the F71808A. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-05-25hwmon: (asc7621) Drop duplicate dependencyJean Delvare1-1/+1
The config SENSORS_ASC7621 entry is inside an if HWMON / endif block, so it already depends on HWMON. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-05-25hwmon: (jc42) Change detection classJean Delvare1-1/+1
While the JC42-compatible chips are temperature sensors, I2C_CLASS_SPD makes more sense because these chips always live on memory modules. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Guenter Roeck <guenter.roeck@ericsson.com>
2011-05-25hwmon: Add driver for AMD family 15h processor power informationAndreas Herrmann3-0/+240
This CPU family provides NB register values to gather following TDP information * ProcessorPwrWatts: Specifies in Watts the maximum amount of power the processor can support. * CurrPwrWatts: Specifies in Watts the current amount of power being consumed by the processor. This driver provides * power1_crit (ProcessorPwrWatts) * power1_input (CurrPwrWatts) Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-05-25hwmon: (k10temp) Add support for Fam15h (Bulldozer)Andre Przywara2-4/+5
AMDs upcoming CPUs use the same mechanism for the internal temperature reporting as the Fam10h CPUs, so we just needed to add the appropriate PCI-ID to the list. This allows to use the k10temp driver on those CPUs. While at it change the Kconfig entry to be more generic. Signed-off-by: Andre Przywara <andre.przywara@amd.com> Acked-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-05-25hwmon: Use helper functions to set and get driver dataJean Delvare6-27/+27
Use helper functions to set and get driver data. This is more elegant. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Andreas Herrmann <andreas.herrmann3@amd.com> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-05-25i8k: Avoid lahf in 64-bit codeLuca Tettamanti1-2/+2
i8k uses lahf to read the flag register in 64-bit code; early x86-64 CPUs, however, lack this instruction and we get an invalid opcode exception at runtime. Use pushf to load the flag register into the stack instead. Signed-off-by: Luca Tettamanti <kronos.it@gmail.com> Reported-by: Jeff Rickman <jrickman@myamigos.us> Tested-by: Jeff Rickman <jrickman@myamigos.us> Tested-by: Harry G McGavran Jr <w5pny@arrl.net> Cc: stable@kernel.org Cc: Massimo Dal Zotto <dz@debian.org> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-05-25Merge branch 'for-davem' of ↵David S. Miller127-874/+1353
ssh://master.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2011-05-25Merge branch 'for-2.6.40/drivers' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds22-295/+2637
* 'for-2.6.40/drivers' of git://git.kernel.dk/linux-2.6-block: (110 commits) loop: handle on-demand devices correctly loop: limit 'max_part' module param to DISK_MAX_PARTS drbd: fix warning drbd: fix warning drbd: Fix spelling drbd: fix schedule in atomic drbd: Take a more conservative approach when deciding max_bio_size drbd: Fixed state transitions after async outdate-peer-handler returned drbd: Disallow the peer_disk_state to be D_OUTDATED while connected drbd: Fix for the connection problems on high latency links drbd: fix potential activity log refcount imbalance in error path drbd: Only downgrade the disk state in case of disk failures drbd: fix disconnect/reconnect loop, if ping-timeout == ping-int drbd: fix potential distributed deadlock lru_cache.h: fix comments referring to ts_ instead of lc_ drbd: Fix for application IO with the on-io-error=pass-on policy xen/p2m: Add EXPORT_SYMBOL_GPL to the M2P override functions. xen/p2m/m2p/gnttab: Support GNTMAP_host_map in the M2P override. xen/blkback: don't fail empty barrier requests xen/blkback: fix xenbus_transaction_start() hang caused by double xenbus_transaction_end() ...
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-21 09:56:12 +0300